Merge tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux into next/dt64

Merge "Broadcom ARM64 Device Tree changes for 4.8 (part 2)" from Florian Fainelli:

This pull request contains the second part of the Broadcom ARM64-based SoCs
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:

- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
  their proper information about the on-board USB Ethernet adapter so there is
  appropriate binding between this USB device and a device_node (useful for MAC
  address fetching and stuff), this commit is also present for the ARM DT pull
  request

- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
  information and the basic SoC DT include file required to boot to a prompt

- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
  earlier change from Lubomir

* tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux:
  ARM: bcm2837: dt: Add the ethernet to the device trees
  ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
  dt-bindings: Add root properties for Raspberry Pi 3
  ARM: bcm2835: dt: Add the ethernet to the device trees

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
 Required root node properties:
 compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
 
+Raspberry Pi 3 Model B
+Required root node properties:
+compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+
 Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";

arch/arm/boot/dts/bcm2835-rpi-b-plus.dts

@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";

arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts

@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";

arch/arm/boot/dts/bcm2836-rpi-2-b.dts

@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";

arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi

@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};

arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi

@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};

arch/arm/boot/dts/bcm283x.dtsi

@@ -287,6 +287,8 @@
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
 			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		v3d: v3d@7ec00000 {

arch/arm64/boot/dts/broadcom/Makefile

@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
 dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
 

arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts

@@ -0,0 +1,30 @@
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "../../../../arm/boot/dts/bcm2835-rpi.dtsi"
+#include "../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};

arch/arm64/boot/dts/broadcom/bcm2837.dtsi

@@ -0,0 +1,76 @@
+#include "../../../../arm/boot/dts/bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0>, // PHYS_SECURE_PPI
+			     <1>, // PHYS_NONSECURE_PPI
+			     <3>, // VIRT_PPI
+			     <2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};