Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux into for-next

The IPMI SI driver was split into different pieces, merge the module
tree to accountfor that.

Signed-off-by: Corey Minyard <cminyard@mvista.com>

.mailmap

@@ -68,6 +68,8 @@ Jacob Shin <Jacob.Shin@amd.com>
 James Bottomley <jejb@mulgrave.(none)>
 James Bottomley <jejb@titanic.il.steeleye.com>
 James E Wilson <wilson@specifix.com>
+James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
+James Hogan <jhogan@kernel.org> <james@albanarts.com>
 James Ketrenos <jketreno@io.(none)>
 Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
 <javier@osg.samsung.com> <javier.martinez@collabora.co.uk>

Documentation/ABI/testing/sysfs-kernel-mm-swap

@@ -14,13 +14,3 @@ Description:	Enable/disable VMA based swap readahead.
 		still used for tmpfs etc. other users.  If set to
 		false, the global swap readahead algorithm will be
 		used for all swappable pages.
-
-What:		/sys/kernel/mm/swap/vma_ra_max_order
-Date:		August 2017
-Contact:	Linux memory management mailing list <linux-mm@kvack.org>
-Description:	The max readahead size in order for VMA based swap readahead
-
-		VMA based swap readahead algorithm will readahead at
-		most 1 << max_order pages for each readahead.  The
-		real readahead size for each readahead will be scaled
-		according to the estimation algorithm.

Documentation/ABI/testing/sysfs-power

@@ -127,7 +127,7 @@ Description:
 
 What;		/sys/power/pm_trace_dev_match
 Date:		October 2010
-Contact:	James Hogan <james@albanarts.com>
+Contact:	James Hogan <jhogan@kernel.org>
 Description:
 		The /sys/power/pm_trace_dev_match file contains the name of the
 		device associated with the last PM event point saved in the RTC

Documentation/core-api/workqueue.rst

@@ -39,8 +39,8 @@ up.
 Although MT wq wasted a lot of resource, the level of concurrency
 provided was unsatisfactory.  The limitation was common to both ST and
 MT wq albeit less severe on MT.  Each wq maintained its own separate
-worker pool.  A MT wq could provide only one execution context per CPU
-while a ST wq one for the whole system.  Work items had to compete for
+worker pool.  An MT wq could provide only one execution context per CPU
+while an ST wq one for the whole system.  Work items had to compete for
 those very limited execution contexts leading to various problems
 including proneness to deadlocks around the single execution context.
 
@@ -151,7 +151,7 @@ Application Programming Interface (API)
 
 ``alloc_workqueue()`` allocates a wq.  The original
 ``create_*workqueue()`` functions are deprecated and scheduled for
-removal.  ``alloc_workqueue()`` takes three arguments - @``name``,
+removal.  ``alloc_workqueue()`` takes three arguments - ``@name``,
 ``@flags`` and ``@max_active``.  ``@name`` is the name of the wq and
 also used as the name of the rescuer thread if there is one.
 
@@ -197,7 +197,7 @@ resources, scheduled and executed.
   served by worker threads with elevated nice level.
 
   Note that normal and highpri worker-pools don't interact with
-  each other.  Each maintain its separate pool of workers and
+  each other.  Each maintains its separate pool of workers and
   implements concurrency management among its workers.
 
 ``WQ_CPU_INTENSIVE``
@@ -249,8 +249,8 @@ unbound worker-pools and only one work item could be active at any given
 time thus achieving the same ordering property as ST wq.
 
 In the current implementation the above configuration only guarantees
-ST behavior within a given NUMA node. Instead alloc_ordered_queue should
-be used to achieve system wide ST behavior.
+ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should
+be used to achieve system-wide ST behavior.
 
 
 Example Execution Scenarios

Documentation/cpu-freq/index.txt

@@ -32,8 +32,6 @@ cpufreq-stats.txt -	General description of sysfs cpufreq stats.
 
 index.txt	-	File index, Mailing list and Links (this document)
 
-intel-pstate.txt -	Intel pstate cpufreq driver specific file.
-
 pcc-cpufreq.txt -	PCC cpufreq driver specific file.
 
 

Documentation/device-mapper/dm-raid.txt

@@ -344,3 +344,4 @@ Version History
 	(wrong raid10_copies/raid10_format sequence)
 1.11.1  Add raid4/5/6 journal write-back support via journal_mode option
 1.12.1  fix for MD deadlock between mddev_suspend() and md_write_start() available
+1.13.0  Fix dev_health status at end of "recover" (was 'a', now 'A')

Documentation/devicetree/bindings/leds/ams,as3645a.txt

@@ -15,11 +15,14 @@ Required properties
 
 compatible	: Must be "ams,as3645a".
 reg		: The I2C address of the device. Typically 0x30.
+#address-cells	: 1
+#size-cells	: 0
 
 
-Required properties of the "flash" child node
-=============================================
+Required properties of the flash child node (0)
+===============================================
 
+reg: 0
 flash-timeout-us: Flash timeout in microseconds. The value must be in
 		  the range [100000, 850000] and divisible by 50000.
 flash-max-microamp: Maximum flash current in microamperes. Has to be
@@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The
 			and divisible by 50000.
 
 
-Optional properties of the "flash" child node
-=============================================
+Optional properties of the flash child node
+===========================================
 
 label		: The label of the flash LED.
 
 
-Required properties of the "indicator" child node
-=================================================
+Required properties of the indicator child node (1)
+===================================================
 
+reg: 1
 led-max-microamp: Maximum indicator current. The allowed values are
 		  2500, 5000, 7500 and 10000.
 
-Optional properties of the "indicator" child node
-=================================================
+Optional properties of the indicator child node
+===============================================
 
 label		: The label of the indicator LED.
 
@@ -55,16 +59,20 @@ Example
 =======
 
 	as3645a@30 {
+		#address-cells: 1
+		#size-cells: 0
 		reg = <0x30>;
 		compatible = "ams,as3645a";
-		flash {
+		flash@0 {
+			reg = <0x0>;
 			flash-timeout-us = <150000>;
 			flash-max-microamp = <320000>;
 			led-max-microamp = <60000>;
 			ams,input-max-microamp = <1750000>;
 			label = "as3645a:flash";
 		};
-		indicator {
+		indicator@1 {
+			reg = <0x1>;
 			led-max-microamp = <10000>;
 			label = "as3645a:indicator";
 		};

Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt

@@ -16,11 +16,13 @@ Required Properties:
 
 - clocks:
   Array of clocks required for SDHC.
-  Require at least input clock for Xenon IP core.
+  Require at least input clock for Xenon IP core. For Armada AP806 and
+  CP110, the AXI clock is also mandatory.
 
 - clock-names:
   Array of names corresponding to clocks property.
   The input clock for Xenon IP core should be named as "core".
+  The input clock for the AXI bus must be named as "axi".
 
 - reg:
   * For "marvell,armada-3700-sdhci", two register areas.
@@ -106,8 +108,8 @@ Example:
 		compatible = "marvell,armada-ap806-sdhci";
 		reg = <0xaa0000 0x1000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmc_clk>;
-		clock-names = "core";
+		clocks = <&emmc_clk>,<&axi_clk>;
+		clock-names = "core", "axi";
 		bus-width = <4>;
 		marvell,xenon-phy-slow-mode;
 		marvell,xenon-tun-count = <11>;
@@ -126,8 +128,8 @@ Example:
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
 		vqmmc-supply = <&sd_vqmmc_regulator>;
 		vmmc-supply = <&sd_vmmc_regulator>;
-		clocks = <&sdclk>;
-		clock-names = "core";
+		clocks = <&sdclk>, <&axi_clk>;
+		clock-names = "core", "axi";
 		bus-width = <4>;
 		marvell,xenon-tun-count = <9>;
 	};

Documentation/devicetree/bindings/net/marvell-pp2.txt

@@ -21,8 +21,9 @@ Required properties:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
 	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
 	- MG clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
-  "mg_clk" (the latter only for armada-7k-pp2).
+	- AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
+  and "axi_clk" (the 2 latter only for armada-7k-pp2).
 
 The ethernet ports are represented by subnodes. At least one port is
 required.
@@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2:
 cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
 	reg = <0x0 0x100000>, <0x129000 0xb000>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
-	clock-names = "pp_clk", "gop_clk", "gp_clk";
+	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
+	clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
 
 	eth0: eth0 {
 		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

Documentation/devicetree/bindings/net/rockchip-dwmac.txt

@@ -4,6 +4,7 @@ The device node has following properties.
 
 Required properties:
  - compatible: should be "rockchip,<name>-gamc"
+   "rockchip,rk3128-gmac": found on RK312x SoCs
    "rockchip,rk3228-gmac": found on RK322x SoCs
    "rockchip,rk3288-gmac": found on RK3288 SoCs
    "rockchip,rk3328-gmac": found on RK3328 SoCs

Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt

@@ -0,0 +1,28 @@
+Binding for the Synopsys HSDK reset controller
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-reset".
+- reg: should always contain 2 pairs address - length: first for reset
+  configuration register and second for corresponding SW reset and status bits
+  register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset@880 {
+		compatible = "snps,hsdk-reset";
+		#reset-cells = <1>;
+		reg = <0x8A0 0x4>, <0xFF0 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset HSDK_V1_ETH_RESET>;
+		....
+	};
+
+The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -41,6 +41,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
+    - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
     - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
     - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.

Documentation/driver-model/driver.txt

@@ -196,12 +196,13 @@ struct driver_attribute {
 };
 
 Device drivers can export attributes via their sysfs directories. 
-Drivers can declare attributes using a DRIVER_ATTR macro that works
-identically to the DEVICE_ATTR macro. 
+Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
+macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
+macros.
 
 Example:
 
-DRIVER_ATTR(debug,0644,show_debug,store_debug);
+DRIVER_ATTR_RW(debug);
 
 This is equivalent to declaring:
 

Documentation/filesystems/overlayfs.txt

@@ -210,8 +210,11 @@ path as another overlay mount and it may use a lower layer path that is
 beneath or above the path of another overlay lower layer path.
 
 Using an upper layer path and/or a workdir path that are already used by
-another overlay mount is not allowed and will fail with EBUSY.  Using
+another overlay mount is not allowed and may fail with EBUSY.  Using
 partially overlapping paths is not allowed but will not fail with EBUSY.
+If files are accessed from two overlayfs mounts which share or overlap the
+upper layer and/or workdir path the behavior of the overlay is undefined,
+though it will not result in a crash or deadlock.
 
 Mounting an overlay using an upper layer path, where the upper layer path
 was previously used by another mounted overlay in combination with a

Documentation/filesystems/sysfs.txt

@@ -366,7 +366,8 @@ struct driver_attribute {
 
 Declaring:
 
-DRIVER_ATTR(_name, _mode, _show, _store)
+DRIVER_ATTR_RO(_name)
+DRIVER_ATTR_RW(_name)
 
 Creation/Removal:
 

Documentation/i2c/busses/i2c-i801

@@ -36,6 +36,7 @@ Supported adapters:
   * Intel Gemini Lake (SOC)
   * Intel Cannon Lake-H (PCH)
   * Intel Cannon Lake-LP (PCH)
+  * Intel Cedar Fork (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/networking/bonding.txt

@@ -2387,7 +2387,7 @@ broadcast: Like active-backup, there is not much advantage to this
 	and packet type ID), so in a "gatewayed" configuration, all
 	outgoing traffic will generally use the same device.  Incoming
 	traffic may also end up on a single device, but that is
-	dependent upon the balancing policy of the peer's 8023.ad
+	dependent upon the balancing policy of the peer's 802.3ad
 	implementation.  In a "local" configuration, traffic will be
 	distributed across the devices in the bond.
 

MAINTAINERS

@@ -5259,7 +5259,8 @@ S:	Maintained
 F:	drivers/iommu/exynos-iommu.c
 
 EZchip NPS platform support
-M:	Noam Camus <noamc@ezchip.com>
+M:	Elad Kanfi <eladkan@mellanox.com>
+M:	Vineet Gupta <vgupta@synopsys.com>
 S:	Supported
 F:	arch/arc/plat-eznps
 F:	arch/arc/boot/dts/eznps.dts
@@ -5345,9 +5346,7 @@ M:	"J. Bruce Fields" <bfields@fieldses.org>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
-F:	include/linux/fs.h
 F:	include/uapi/linux/fcntl.h
-F:	include/uapi/linux/fs.h
 F:	fs/fcntl.c
 F:	fs/locks.c
 
@@ -5356,6 +5355,8 @@ M:	Alexander Viro <viro@zeniv.linux.org.uk>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/*
+F:	include/linux/fs.h
+F:	include/uapi/linux/fs.h
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
@@ -6738,7 +6739,7 @@ F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
 F:	drivers/auxdisplay/img-ascii-lcd.c
 
 IMGTEC IR DECODER DRIVER
-M:	James Hogan <james.hogan@imgtec.com>
+M:	James Hogan <jhogan@kernel.org>
 S:	Maintained
 F:	drivers/media/rc/img-ir/
 
@@ -7562,7 +7563,7 @@ F:	arch/arm64/include/asm/kvm*
 F:	arch/arm64/kvm/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
-M:	James Hogan <james.hogan@imgtec.com>
+M:	James Hogan <jhogan@kernel.org>
 L:	linux-mips@linux-mips.org
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
@@ -7570,7 +7571,7 @@ F:	arch/mips/include/asm/kvm*
 F:	arch/mips/kvm/
 
 KERNEL VIRTUAL MACHINE FOR POWERPC (KVM/powerpc)
-M:	Alexander Graf <agraf@suse.com>
+M:	Paul Mackerras <paulus@ozlabs.org>
 L:	kvm-ppc@vger.kernel.org
 W:	http://www.linux-kvm.org/
 T:	git git://github.com/agraf/linux-2.6.git
@@ -8264,6 +8265,12 @@ L:	libertas-dev@lists.infradead.org
 S:	Orphan
 F:	drivers/net/wireless/marvell/libertas/
 
+MARVELL MACCHIATOBIN SUPPORT
+M:	Russell King <rmk@armlinux.org.uk>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+
 MARVELL MV643XX ETHERNET DRIVER
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	netdev@vger.kernel.org
@@ -8597,6 +8604,12 @@ M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
 F:	drivers/media/rc/mtk-cir.c
 
+MEDIATEK PMIC LED DRIVER
+M:	Sean Wang <sean.wang@mediatek.com>
+S:	Maintained
+F:	drivers/leds/leds-mt6323.c
+F:	Documentation/devicetree/bindings/leds/leds-mt6323.txt
+
 MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <nbd@openwrt.org>
 M:	John Crispin <john@phrozen.org>
@@ -8879,7 +8892,7 @@ F:	Documentation/devicetree/bindings/media/meson-ao-cec.txt
 T:	git git://linuxtv.org/media_tree.git
 
 METAG ARCHITECTURE
-M:	James Hogan <james.hogan@imgtec.com>
+M:	James Hogan <jhogan@kernel.org>
 L:	linux-metag@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag.git
 S:	Odd Fixes
@@ -9348,7 +9361,7 @@ NETWORK BLOCK DEVICE (NBD)
 M:	Josef Bacik <jbacik@fb.com>
 S:	Maintained
 L:	linux-block@vger.kernel.org
-L:	nbd-general@lists.sourceforge.net
+L:	nbd@other.debian.org
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/uapi/linux/nbd.h
@@ -12925,9 +12938,9 @@ F:	drivers/mmc/host/dw_mmc*
 SYNOPSYS HSDK RESET CONTROLLER DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
-F:	drivers/reset/reset-hsdk-v1.c
-F:	include/dt-bindings/reset/snps,hsdk-v1-reset.h
-F:	Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
+F:	drivers/reset/reset-hsdk.c
+F:	include/dt-bindings/reset/snps,hsdk-reset.h
+F:	Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
 
 SYSTEM CONFIGURATION (SYSCON)
 M:	Lee Jones <lee.jones@linaro.org>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -933,7 +933,11 @@ ifdef CONFIG_STACK_VALIDATION
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else
-    $(warning "Cannot use CONFIG_STACK_VALIDATION, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    ifdef CONFIG_ORC_UNWINDER
+      $(error "Cannot generate ORC metadata for CONFIG_ORC_UNWINDER=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    else
+      $(warning "Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+    endif
     SKIP_STACK_VALIDATION := 1
     export SKIP_STACK_VALIDATION
   endif

arch/Kconfig

@@ -937,9 +937,6 @@ config STRICT_MODULE_RWX
 	  and non-text memory will be made non-executable. This provides
 	  protection against certain security exploits (e.g. writing to text)
 
-config ARCH_WANT_RELAX_ORDER
-	bool
-
 config ARCH_HAS_REFCOUNT
 	bool
 	help

arch/alpha/include/asm/mmu_context.h

@@ -8,6 +8,7 @@
  */
 
 #include <linux/mm_types.h>
+#include <linux/sched.h>
 
 #include <asm/machvec.h>
 #include <asm/compiler.h>

arch/arc/Kconfig

@@ -24,7 +24,7 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_FUTEX_CMPXCHG
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES

arch/arc/Makefile

@@ -6,8 +6,6 @@
 # published by the Free Software Foundation.
 #
 
-UTS_MACHINE := arc
-
 ifeq ($(CROSS_COMPILE),)
 ifndef CONFIG_CPU_BIG_ENDIAN
 CROSS_COMPILE := arc-linux-

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -44,7 +44,14 @@
 
 			mmcclk: mmcclk {
 				compatible = "fixed-clock";
-				clock-frequency = <50000000>;
+				/*
+				 * DW sdio controller has external ciu clock divider
+				 * controlled via register in SDIO IP. It divides
+				 * sdio_ref_clk (which comes from CGU) by 16 for
+				 * default. So default mmcclk clock (which comes
+				 * to sdk_in) is 25000000 Hz.
+				 */
+				clock-frequency = <25000000>;
 				#clock-cells = <0>;
 			};
 

arch/arc/boot/dts/hsdk.dts

@@ -12,6 +12,7 @@
 /dts-v1/;
 
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
 
 / {
 	model = "snps,hsdk";
@@ -57,10 +58,10 @@
 		};
 	};
 
-	core_clk: core-clk {
+	input_clk: input-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
+		clock-frequency = <33333333>;
 	};
 
 	cpu_intc: cpu-interrupt-controller {
@@ -102,6 +103,19 @@
 
 		ranges = <0x00000000 0xf0000000 0x10000000>;
 
+		cgu_rst: reset-controller@8a0 {
+			compatible = "snps,hsdk-reset";
+			#reset-cells = <1>;
+			reg = <0x8A0 0x4>, <0xFF0 0x4>;
+		};
+
+		core_clk: core-clk@0 {
+			compatible = "snps,hsdk-core-pll-clock";
+			reg = <0x00 0x10>, <0x14B8 0x4>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+		};
+
 		serial: serial@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
@@ -120,7 +134,17 @@
 
 		mmcclk_ciu: mmcclk-ciu {
 			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+			/*
+			 * DW sdio controller has external ciu clock divider
+			 * controlled via register in SDIO IP. Due to its
+			 * unexpected default value (it should devide by 1
+			 * but it devides by 8) SDIO IP uses wrong clock and
+			 * works unstable (see STAR 9001204800)
+			 * So add temporary fix and change clock frequency
+			 * from 100000000 to 12500000 Hz until we fix dw sdio
+			 * driver itself.
+			 */
+			clock-frequency = <12500000>;
 			#clock-cells = <0>;
 		};
 
@@ -141,6 +165,8 @@
 			clocks = <&gmacclk>;
 			clock-names = "stmmaceth";
 			phy-handle = <&phy0>;
+			resets = <&cgu_rst HSDK_ETH_RESET>;
+			reset-names = "stmmaceth";
 
 			mdio {
 				#address-cells = <1>;

arch/arc/configs/axs101_defconfig

@@ -105,7 +105,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/axs103_defconfig

@@ -104,7 +104,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/axs103_smp_defconfig

@@ -107,7 +107,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/haps_hs_smp_defconfig

@@ -84,5 +84,5 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/hsdk_defconfig

@@ -63,6 +63,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_HSDK=y
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -72,7 +73,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/vdk_hs38_defconfig

@@ -94,7 +94,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -98,7 +98,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/include/asm/arcregs.h

@@ -98,6 +98,7 @@
 
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
+#define AUX_EXEC_CTRL		8
 #define AUX_INTR_VEC_BASE	0x25
 #define AUX_VOL			0x5e
 
@@ -135,12 +136,12 @@ struct bcr_identity {
 #endif
 };
 
-struct bcr_isa {
+struct bcr_isa_arcv2 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1,
-		     pad1:11, atomic1:1, ver:8;
+		     pad1:12, ver:8;
 #else
-	unsigned int ver:8, atomic1:1, pad1:11, be:1, atomic:1, unalign:1,
+	unsigned int ver:8, pad1:12, be:1, atomic:1, unalign:1,
 		     ldd:1, pad2:4, div_rem:4;
 #endif
 };
@@ -263,13 +264,13 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_mmu mmu;
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
-	struct bcr_isa isa;
+	struct bcr_isa_arcv2 isa;
 	const char *details, *name;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
-			     fpu_sp:1, fpu_dp:1, pad2:6,
+			     fpu_sp:1, fpu_dp:1, dual_iss_enb:1, dual_iss_exist:1, pad2:4,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;

arch/arc/kernel/setup.c

@@ -51,6 +51,7 @@ static const struct id_to_str arc_cpu_rel[] = {
 	{ 0x51, "R2.0" },
 	{ 0x52, "R2.1" },
 	{ 0x53, "R3.0" },
+	{ 0x54, "R4.0" },
 #endif
 	{ 0x00, NULL   }
 };
@@ -62,6 +63,7 @@ static const struct id_to_str arc_cpu_nm[] = {
 #else
 	{ 0x40, "ARC EM"  },
 	{ 0x50, "ARC HS38"  },
+	{ 0x54, "ARC HS48"  },
 #endif
 	{ 0x00, "Unknown"   }
 };
@@ -119,11 +121,11 @@ static void read_arc_build_cfg_regs(void)
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	const struct id_to_str *tbl;
+	struct bcr_isa_arcv2 isa;
 
 	FIX_PTR(cpu);
 
 	READ_BCR(AUX_IDENTITY, cpu->core);
-	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
 	for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
 		if (cpu->core.family == tbl->id) {
@@ -133,7 +135,7 @@ static void read_arc_build_cfg_regs(void)
 	}
 
 	for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
-		if ((cpu->core.family & 0xF0) == tbl->id)
+		if ((cpu->core.family & 0xF4) == tbl->id)
 			break;
 	}
 	cpu->name = tbl->str;
@@ -192,6 +194,14 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.full = bpu.ft;
 		cpu->bpu.num_cache = 256 << bpu.bce;
 		cpu->bpu.num_pred = 2048 << bpu.pte;
+
+		if (cpu->core.family >= 0x54) {
+			unsigned int exec_ctrl;
+
+			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
+			cpu->extn.dual_iss_exist = 1;
+			cpu->extn.dual_iss_enb = exec_ctrl & 1;
+		}
 	}
 
 	READ_BCR(ARC_REG_AP_BCR, bcr);
@@ -205,18 +215,25 @@ static void read_arc_build_cfg_regs(void)
 
 	cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
 
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
+
 	/* some hacks for lack of feature BCR info in old ARC700 cores */
 	if (is_isa_arcompact()) {
-		if (!cpu->isa.ver)	/* ISA BCR absent, use Kconfig info */
+		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
 			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-		else
-			cpu->isa.atomic = cpu->isa.atomic1;
+		else {
+			/* ARC700_BUILD only has 2 bits of isa info */
+			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
+			cpu->isa.atomic = bcr.info & 1;
+		}
 
 		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
 
 		 /* there's no direct way to distinguish 750 vs. 770 */
 		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
 			cpu->name = "ARC750";
+	} else {
+		cpu->isa = isa;
 	}
 }
 
@@ -232,10 +249,11 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
 		       core->family, core->cpu_id, core->chip_id);
 
-	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s\n",
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
 		       cpu_id, cpu->name, cpu->details,
 		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
-		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"));
+		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(cpu->extn.dual_iss_exist, cpu->extn.dual_iss_enb, " Dual-Issue"));
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
 		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),

arch/arc/plat-axs10x/axs10x.c

@@ -111,6 +111,13 @@ static void __init axs10x_early_init(void)
 
 	axs10x_enable_gpio_intc_wire();
 
+	/*
+	 * Reset ethernet IP core.
+	 * TODO: get rid of this quirk after axs10x reset driver (or simple
+	 * reset driver) will be available in upstream.
+	 */
+	iowrite32((1 << 5), (void __iomem *) CREG_MB_SW_RESET);
+
 	scnprintf(mb, 32, "MainBoard v%d", mb_rev);
 	axs10x_print_board_ver(CREG_MB_VER, mb);
 }

arch/arc/plat-hsdk/Kconfig

@@ -6,4 +6,5 @@
 #
 
 menuconfig ARC_SOC_HSDK
-       bool "ARC HS Development Kit SOC"
+	bool "ARC HS Development Kit SOC"
+	select CLK_HSDK

arch/arc/plat-hsdk/platform.c

@@ -38,6 +38,42 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
 #define CREG_PAE		(CREG_BASE + 0x180)
 #define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
 
+#define CREG_CORE_IF_CLK_DIV	(CREG_BASE + 0x4B8)
+#define CREG_CORE_IF_CLK_DIV_2	0x1
+#define CGU_BASE		ARC_PERIPHERAL_BASE
+#define CGU_PLL_STATUS		(ARC_PERIPHERAL_BASE + 0x4)
+#define CGU_PLL_CTRL		(ARC_PERIPHERAL_BASE + 0x0)
+#define CGU_PLL_STATUS_LOCK	BIT(0)
+#define CGU_PLL_STATUS_ERR	BIT(1)
+#define CGU_PLL_CTRL_1GHZ	0x3A10
+#define HSDK_PLL_LOCK_TIMEOUT	500
+
+#define HSDK_PLL_LOCKED() \
+	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
+
+#define HSDK_PLL_ERR() \
+	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
+
+static void __init hsdk_set_cpu_freq_1ghz(void)
+{
+	u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
+
+	/*
+	 * As we set cpu clock which exceeds 500MHz, the divider for the interface
+	 * clock must be programmed to div-by-2.
+	 */
+	iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
+
+	/* Set cpu clock to 1GHz */
+	iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
+
+	while (!HSDK_PLL_LOCKED() && timeout--)
+		cpu_relax();
+
+	if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
+		pr_err("Failed to setup CPU frequency to 1GHz!");
+}
+
 static void __init hsdk_init_early(void)
 {
 	/*
@@ -52,6 +88,12 @@ static void __init hsdk_init_early(void)
 
 	/* Really apply settings made above */
 	writel(1, (void __iomem *) CREG_PAE_UPDATE);
+
+	/*
+	 * Setup CPU frequency to 1GHz.
+	 * TODO: remove it after smart hsdk pll driver will be introduced.
+	 */
+	hsdk_set_cpu_freq_1ghz();
 }
 
 static const char *hsdk_compat[] __initconst = {

arch/arm/boot/dts/am33xx.dtsi

@@ -36,6 +36,8 @@
 		phy1 = &usb1_phy;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	cpus {

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -388,6 +388,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -402,11 +403,6 @@
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
 &phy_sel {
 	rmii-clock-ext;
 };

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -67,7 +67,10 @@
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
@@ -120,7 +123,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
 				atmel,use-dma-rx;
-				atmel-use-dma-tx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -178,7 +181,7 @@
 			uart4: serial@fc00c000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				pinctrl-name = "default";
+				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
 				status = "okay";
 			};
@@ -330,7 +333,7 @@
 				};
 
 				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PA27__GPIO>,
+					pinmux = <PIN_PA10__GPIO>,
 						 <PIN_PB1__GPIO>,
 						 <PIN_PA31__GPIO>;
 					bias-pull-up;
@@ -396,7 +399,7 @@
 				};
 
 				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PA10__GPIO>,
+					pinmux = <PIN_PA27__GPIO>,
 						 <PIN_PD19__GPIO>;
 					bias-disable;
 				};
@@ -520,17 +523,17 @@
 
 		red {
 			label = "red";
-			gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
 			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

arch/arm/boot/dts/da850-evm.dts

@@ -15,6 +15,13 @@
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
 	soc@1c00000 {
 		pmx_core: pinmux@14120 {
 			status = "okay";

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -1817,6 +1817,8 @@
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1868>;
+		assigned-clocks = <&mcasp3_ahclkx_mux>;
+		assigned-clock-parents = <&abe_24m_fclk>;
 	};
 
 	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {

arch/arm/boot/dts/omap3-n900.dts

@@ -144,15 +144,6 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	rear_camera: camera@0 {
-		compatible = "linux,camera";
-
-		module {
-			model = "TCM8341MD";
-			sensor = <&cam1>;
-		};
-	};
-
 	pwm9: dmtimer-pwm {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
@@ -189,10 +180,8 @@
 				clock-lanes = <1>;
 				data-lanes = <0>;
 				lane-polarity = <0 0>;
-				clock-inv = <0>;
 				/* Select strobe = <1> for back camera, <0> for front camera */
 				strobe = <1>;
-				crc = <0>;
 			};
 		};
 	};

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -267,15 +267,19 @@
 	clock-frequency = <400000>;
 
 	as3645a@30 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x30>;
 		compatible = "ams,as3645a";
-		flash {
+		flash@0 {
+			reg = <0x0>;
 			flash-timeout-us = <150000>;
 			flash-max-microamp = <320000>;
 			led-max-microamp = <60000>;
-			peak-current-limit = <1750000>;
+			ams,input-max-microamp = <1750000>;
 		};
-		indicator {
+		indicator@1 {
+			reg = <0x1>;
 			led-max-microamp = <10000>;
 		};
 	};

arch/arm/boot/dts/stm32429i-eval.dts

@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -202,10 +203,8 @@
 	stmpe1600: stmpe1600@42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-		irq-gpio = <&gpioi 8 0>;
-		irq-trigger = <3>;
 		interrupts = <8 3>;
-		interrupt-parent = <&exti>;
+		interrupt-parent = <&gpioi>;
 		interrupt-controller;
 		wakeup-source;
 

arch/arm/boot/dts/stm32f4-pinctrl.dtsi

@@ -0,0 +1,343 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3@0 {
+				pins1 {
+					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+					bias-disable;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg_fs@0 {
+				pins {
+					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
+						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg_fs@1 {
+				pins {
+					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
+						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg_hs@0 {
+				pins {
+					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet_mii: mii@0 {
+				pins {
+					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+						 <STM32F429_PA2_FUNC_ETH_MDIO>,
+						 <STM32F429_PC1_FUNC_ETH_MDC>,
+						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+					slew-rate = <2>;
+				};
+			};
+
+			adc3_in8_pin: adc@200 {
+				pins {
+					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+				};
+			};
+
+			pwm1_pins: pwm@1 {
+				pins {
+					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
+						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
+				};
+			};
+
+			pwm3_pins: pwm@3 {
+				pins {
+					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+						 <STM32F429_PB5_FUNC_TIM3_CH2>;
+				};
+			};
+
+			i2c1_pins: i2c1@0 {
+				pins {
+					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+						 <STM32F429_PB6_FUNC_I2C1_SCL>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			ltdc_pins: ltdc@0 {
+				pins {
+					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
+						 <STM32F429_PI14_FUNC_LCD_CLK>,
+						 <STM32F429_PI15_FUNC_LCD_R0>,
+						 <STM32F429_PJ0_FUNC_LCD_R1>,
+						 <STM32F429_PJ1_FUNC_LCD_R2>,
+						 <STM32F429_PJ2_FUNC_LCD_R3>,
+						 <STM32F429_PJ3_FUNC_LCD_R4>,
+						 <STM32F429_PJ4_FUNC_LCD_R5>,
+						 <STM32F429_PJ5_FUNC_LCD_R6>,
+						 <STM32F429_PJ6_FUNC_LCD_R7>,
+						 <STM32F429_PJ7_FUNC_LCD_G0>,
+						 <STM32F429_PJ8_FUNC_LCD_G1>,
+						 <STM32F429_PJ9_FUNC_LCD_G2>,
+						 <STM32F429_PJ10_FUNC_LCD_G3>,
+						 <STM32F429_PJ11_FUNC_LCD_G4>,
+						 <STM32F429_PJ12_FUNC_LCD_B0>,
+						 <STM32F429_PJ13_FUNC_LCD_B1>,
+						 <STM32F429_PJ14_FUNC_LCD_B2>,
+						 <STM32F429_PJ15_FUNC_LCD_B3>,
+						 <STM32F429_PK0_FUNC_LCD_G5>,
+						 <STM32F429_PK1_FUNC_LCD_G6>,
+						 <STM32F429_PK2_FUNC_LCD_G7>,
+						 <STM32F429_PK3_FUNC_LCD_B4>,
+						 <STM32F429_PK4_FUNC_LCD_B5>,
+						 <STM32F429_PK5_FUNC_LCD_B6>,
+						 <STM32F429_PK6_FUNC_LCD_B7>,
+						 <STM32F429_PK7_FUNC_LCD_DE>;
+					slew-rate = <2>;
+				};
+			};
+
+			dcmi_pins: dcmi@0 {
+				pins {
+					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F429_PC6_FUNC_DCMI_D0>,
+						 <STM32F429_PC7_FUNC_DCMI_D1>,
+						 <STM32F429_PC8_FUNC_DCMI_D2>,
+						 <STM32F429_PC9_FUNC_DCMI_D3>,
+						 <STM32F429_PC11_FUNC_DCMI_D4>,
+						 <STM32F429_PD3_FUNC_DCMI_D5>,
+						 <STM32F429_PB8_FUNC_DCMI_D6>,
+						 <STM32F429_PE6_FUNC_DCMI_D7>,
+						 <STM32F429_PC10_FUNC_DCMI_D8>,
+						 <STM32F429_PC12_FUNC_DCMI_D9>,
+						 <STM32F429_PD6_FUNC_DCMI_D10>,
+						 <STM32F429_PD2_FUNC_DCMI_D11>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/stm32f429-disco.dts

@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {

arch/arm/boot/dts/stm32f429-pinctrl.dtsi

@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f429-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/stm32f429.dtsi

@@ -47,7 +47,6 @@
 
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f4-rcc.h>
 
@@ -591,302 +590,6 @@
 			status = "disabled";
 		};
 
-		pinctrl: pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32f429-pinctrl";
-			ranges = <0 0x40020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
-				st,bank-name = "GPIOC";
-			};
-
-			gpiod: gpio@40020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
-				st,bank-name = "GPIOD";
-			};
-
-			gpioe: gpio@40021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
-				st,bank-name = "GPIOE";
-			};
-
-			gpiof: gpio@40021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
-				st,bank-name = "GPIOF";
-			};
-
-			gpiog: gpio@40021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
-				st,bank-name = "GPIOG";
-			};
-
-			gpioh: gpio@40021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
-				st,bank-name = "GPIOH";
-			};
-
-			gpioi: gpio@40022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
-				st,bank-name = "GPIOI";
-			};
-
-			gpioj: gpio@40022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
-				st,bank-name = "GPIOJ";
-			};
-
-			gpiok: gpio@40022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
-				st,bank-name = "GPIOK";
-			};
-
-			usart1_pins_a: usart1@0 {
-				pins1 {
-					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
-					bias-disable;
-				};
-			};
-
-			usart3_pins_a: usart3@0 {
-				pins1 {
-					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
-					bias-disable;
-				};
-			};
-
-			usbotg_fs_pins_a: usbotg_fs@0 {
-				pins {
-					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
-						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
-						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_fs_pins_b: usbotg_fs@1 {
-				pins {
-					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
-						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
-						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg_hs@0 {
-				pins {
-					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
-						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
-						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
-						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
-						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
-						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
-						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
-						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
-						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
-						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
-						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
-						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			ethernet_mii: mii@0 {
-				pins {
-					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
-						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
-						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
-						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
-						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
-						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
-						 <STM32F429_PA2_FUNC_ETH_MDIO>,
-						 <STM32F429_PC1_FUNC_ETH_MDC>,
-						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
-						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
-						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
-						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
-						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
-						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
-					slew-rate = <2>;
-				};
-			};
-
-			adc3_in8_pin: adc@200 {
-				pins {
-					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
-				};
-			};
-
-			pwm1_pins: pwm@1 {
-				pins {
-					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
-						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
-						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
-				};
-			};
-
-			pwm3_pins: pwm@3 {
-				pins {
-					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
-						 <STM32F429_PB5_FUNC_TIM3_CH2>;
-				};
-			};
-
-			i2c1_pins: i2c1@0 {
-				pins {
-					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
-						 <STM32F429_PB6_FUNC_I2C1_SCL>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <3>;
-				};
-			};
-
-			ltdc_pins: ltdc@0 {
-				pins {
-					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
-						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
-						 <STM32F429_PI14_FUNC_LCD_CLK>,
-						 <STM32F429_PI15_FUNC_LCD_R0>,
-						 <STM32F429_PJ0_FUNC_LCD_R1>,
-						 <STM32F429_PJ1_FUNC_LCD_R2>,
-						 <STM32F429_PJ2_FUNC_LCD_R3>,
-						 <STM32F429_PJ3_FUNC_LCD_R4>,
-						 <STM32F429_PJ4_FUNC_LCD_R5>,
-						 <STM32F429_PJ5_FUNC_LCD_R6>,
-						 <STM32F429_PJ6_FUNC_LCD_R7>,
-						 <STM32F429_PJ7_FUNC_LCD_G0>,
-						 <STM32F429_PJ8_FUNC_LCD_G1>,
-						 <STM32F429_PJ9_FUNC_LCD_G2>,
-						 <STM32F429_PJ10_FUNC_LCD_G3>,
-						 <STM32F429_PJ11_FUNC_LCD_G4>,
-						 <STM32F429_PJ12_FUNC_LCD_B0>,
-						 <STM32F429_PJ13_FUNC_LCD_B1>,
-						 <STM32F429_PJ14_FUNC_LCD_B2>,
-						 <STM32F429_PJ15_FUNC_LCD_B3>,
-						 <STM32F429_PK0_FUNC_LCD_G5>,
-						 <STM32F429_PK1_FUNC_LCD_G6>,
-						 <STM32F429_PK2_FUNC_LCD_G7>,
-						 <STM32F429_PK3_FUNC_LCD_B4>,
-						 <STM32F429_PK4_FUNC_LCD_B5>,
-						 <STM32F429_PK5_FUNC_LCD_B6>,
-						 <STM32F429_PK6_FUNC_LCD_B7>,
-						 <STM32F429_PK7_FUNC_LCD_DE>;
-					slew-rate = <2>;
-				};
-			};
-
-			dcmi_pins: dcmi@0 {
-				pins {
-					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
-						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
-						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
-						 <STM32F429_PC6_FUNC_DCMI_D0>,
-						 <STM32F429_PC7_FUNC_DCMI_D1>,
-						 <STM32F429_PC8_FUNC_DCMI_D2>,
-						 <STM32F429_PC9_FUNC_DCMI_D3>,
-						 <STM32F429_PC11_FUNC_DCMI_D4>,
-						 <STM32F429_PD3_FUNC_DCMI_D5>,
-						 <STM32F429_PB8_FUNC_DCMI_D6>,
-						 <STM32F429_PE6_FUNC_DCMI_D7>,
-						 <STM32F429_PC10_FUNC_DCMI_D8>,
-						 <STM32F429_PC12_FUNC_DCMI_D9>,
-						 <STM32F429_PD6_FUNC_DCMI_D10>,
-						 <STM32F429_PD2_FUNC_DCMI_D11>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-			};
-		};
-
 		crc: crc@40023000 {
 			compatible = "st,stm32f4-crc";
 			reg = <0x40023000 0x400>;

arch/arm/boot/dts/stm32f469-disco.dts

@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f469-pinctrl.dtsi"
 
 / {
 	model = "STMicroelectronics STM32F469i-DISCO board";

arch/arm/boot/dts/stm32f469-pinctrl.dtsi

@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f469-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 6>,
+					      <&pinctrl 12 156 4>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 3 163 5>;
+			};
+		};
+	};
+};

arch/arm/configs/gemini_defconfig

@@ -32,6 +32,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_PATA_FTIDE010=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -55,8 +56,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GEMINI=y
 CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y

arch/arm/configs/pxa_defconfig

@@ -471,7 +471,7 @@ CONFIG_LCD_PLATFORM=m
 CONFIG_LCD_TOSA=m
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_TOSA=m
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m

arch/arm/configs/viper_defconfig

@@ -113,7 +113,7 @@ CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_PWM=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m

arch/arm/configs/zeus_defconfig

@@ -112,7 +112,7 @@ CONFIG_FB_PXA=m
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m

arch/arm/mach-at91/pm.c

@@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void)
 	}
 
 	pm_bu->suspended = 0;
-	pm_bu->canary = virt_to_phys(&canary);
-	pm_bu->resume = virt_to_phys(cpu_resume);
+	pm_bu->canary = __pa_symbol(&canary);
+	pm_bu->resume = __pa_symbol(cpu_resume);
 
 	return;
 

arch/arm/mach-omap2/hsmmc.c

@@ -58,10 +58,10 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 	struct platform_device *pdev;
 	int res;
 
-	if (omap_hsmmc_done != 1)
+	if (omap_hsmmc_done)
 		return;
 
-	omap_hsmmc_done++;
+	omap_hsmmc_done = 1;
 
 	for (; c->mmc; c++) {
 		pdev = c->pdev;

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -839,6 +839,7 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
 	.name		= "gpio1",
 	.class		= &dra7xx_gpio_hwmod_class,
 	.clkdm_name	= "wkupaon_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.main_clk	= "wkupaon_iclk_mux",
 	.prcm = {
 		.omap4 = {

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -168,7 +168,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -194,7 +195,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -212,10 +214,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

@@ -107,6 +107,9 @@
 
 		states = <3300000 0>,
 		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
 	};
 
 	wifi_32k: wifi-32k {
@@ -250,7 +253,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -276,11 +280,16 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <100000000>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
 	disable-wp;
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
@@ -294,10 +303,10 @@
 &sd_emmc_c {
 	status = "disabled";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -51,7 +51,7 @@
 / {
 	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
 	model = "NEXBOX A95X";
-	
+
 	aliases {
 		serial0 = &uart_AO;
 	};
@@ -232,7 +232,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -253,7 +254,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -271,10 +273,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -50,7 +50,7 @@
 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
 	model = "Hardkernel ODROID-C2";
-	
+
 	aliases {
 		serial0 = &uart_AO;
 	};
@@ -253,7 +253,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -271,10 +272,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -194,7 +194,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -220,10 +221,14 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -238,10 +243,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -155,7 +155,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -181,7 +182,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -198,10 +200,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -392,6 +392,17 @@
 			};
 		};
 
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "BOOT_8";
+				bias-pull-down;
+			};
+		};
+
 		nor_pins: nor {
 			mux {
 				groups = "nor_d",
@@ -430,6 +441,17 @@
 			};
 		};
 
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "CARD_2";
+				bias-pull-down;
+			};
+		};
+
 		sdio_pins: sdio {
 			mux {
 				groups = "sdio_d0",
@@ -442,6 +464,17 @@
 			};
 		};
 
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "GPIOX_4";
+				bias-pull-down;
+			};
+		};
+
 		sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
@@ -661,21 +694,21 @@
 
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_b {
 	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_c {
 	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

@@ -123,7 +123,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -141,10 +142,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <100000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

@@ -91,6 +91,9 @@
 
 		states = <3300000 0>,
 			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
 	};
 
 	vddio_boot: regulator-vddio_boot {
@@ -197,10 +200,14 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -215,10 +222,12 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
 	max-frequency = <50000000>;
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -189,7 +189,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -210,7 +211,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -228,10 +230,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi

@@ -95,7 +95,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -116,7 +117,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -134,10 +136,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -281,6 +281,17 @@
 			};
 		};
 
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "BOOT_8";
+				bias-pull-down;
+			};
+		};
+
 		nor_pins: nor {
 			mux {
 				groups = "nor_d",
@@ -319,6 +330,17 @@
 			};
 		};
 
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "CARD_2";
+				bias-pull-down;
+			};
+		};
+
 		sdio_pins: sdio {
 			mux {
 				groups = "sdio_d0",
@@ -331,6 +353,17 @@
 			};
 		};
 
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "GPIOX_4";
+				bias-pull-down;
+			};
+		};
+
 		sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
@@ -603,21 +636,21 @@
 
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_b {
 	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
        clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_c {
 	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

@@ -175,7 +175,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -193,10 +194,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts

@@ -220,7 +220,6 @@
 	pinctrl-names = "default";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -254,7 +254,7 @@
 
 			ap_syscon: system-controller@6f4000 {
 				compatible = "syscon", "simple-mfd";
-				reg = <0x6f4000 0x1000>;
+				reg = <0x6f4000 0x2000>;
 
 				ap_clk: clock {
 					compatible = "marvell,ap806-clock";
@@ -265,7 +265,7 @@
 					compatible = "marvell,ap806-pinctrl";
 				};
 
-				ap_gpio: gpio {
+				ap_gpio: gpio@1040 {
 					compatible = "marvell,armada-8k-gpio";
 					offset = <0x1040>;
 					ngpios = <20>;

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -113,8 +113,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
+
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -123,8 +122,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -132,8 +129,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -141,8 +136,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -150,8 +143,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
+
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -160,8 +152,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b2: cpu@102 {
@@ -169,8 +159,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b3: cpu@103 {
@@ -178,62 +166,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-	};
-
-	cluster0_opp: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <950000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <1025000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cluster1_opp: opp-table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <950000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <975000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1050000>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1629,9 +1629,9 @@
 		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x8000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
-			 <&cru SCLK_DPHY_TX0_CFG>;
-		clock-names = "ref", "pclk", "phy_cfg";
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
 		power-domains = <&power RK3399_PD_VIO>;
 		rockchip,grf = <&grf>;
 		status = "disabled";

arch/arm64/include/asm/memory.h

@@ -95,16 +95,19 @@
 #define KERNEL_END        _end
 
 /*
- * The size of the KASAN shadow region. This should be 1/8th of the
- * size of the entire kernel virtual address space.
+ * KASAN requires 1/8th of the kernel virtual address space for the shadow
+ * region. KASAN can bloat the stack significantly, so double the (minimum)
+ * stack size when KASAN is in use.
  */
 #ifdef CONFIG_KASAN
 #define KASAN_SHADOW_SIZE	(UL(1) << (VA_BITS - 3))
+#define KASAN_THREAD_SHIFT	1
 #else
 #define KASAN_SHADOW_SIZE	(0)
+#define KASAN_THREAD_SHIFT	0
 #endif
 
-#define MIN_THREAD_SHIFT	14
+#define MIN_THREAD_SHIFT	(14 + KASAN_THREAD_SHIFT)
 
 /*
  * VMAP'd stacks are allocated at page granularity, so we must ensure that such

arch/arm64/include/asm/pgtable.h

@@ -401,7 +401,7 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
 /* Find an entry in the third-level page table. */
 #define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
-#define pte_offset_phys(dir,addr)	(pmd_page_paddr(*(dir)) + pte_index(addr) * sizeof(pte_t))
+#define pte_offset_phys(dir,addr)	(pmd_page_paddr(READ_ONCE(*(dir))) + pte_index(addr) * sizeof(pte_t))
 #define pte_offset_kernel(dir,addr)	((pte_t *)__va(pte_offset_phys((dir), (addr))))
 
 #define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))

arch/arm64/kernel/armv8_deprecated.c

@@ -649,4 +649,4 @@ static int __init armv8_deprecated_init(void)
 	return 0;
 }
 
-late_initcall(armv8_deprecated_init);
+core_initcall(armv8_deprecated_init);

arch/arm64/kernel/cpufeature.c

@@ -1307,4 +1307,4 @@ static int __init enable_mrs_emulation(void)
 	return 0;
 }
 
-late_initcall(enable_mrs_emulation);
+core_initcall(enable_mrs_emulation);

arch/arm64/kernel/fpsimd.c

@@ -444,4 +444,4 @@ static int __init fpsimd_init(void)
 
 	return 0;
 }
-late_initcall(fpsimd_init);
+core_initcall(fpsimd_init);

arch/arm64/kernel/head.S

@@ -384,6 +384,7 @@ ENTRY(kimage_vaddr)
  * booted in EL1 or EL2 respectively.
  */
 ENTRY(el2_setup)
+	msr	SPsel, #1			// We want to use SP_EL{1,2}
 	mrs	x0, CurrentEL
 	cmp	x0, #CurrentEL_EL2
 	b.eq	1f

arch/arm64/mm/fault.c

@@ -97,7 +97,7 @@ static void data_abort_decode(unsigned int esr)
 			 (esr & ESR_ELx_SF) >> ESR_ELx_SF_SHIFT,
 			 (esr & ESR_ELx_AR) >> ESR_ELx_AR_SHIFT);
 	} else {
-		pr_alert("  ISV = 0, ISS = 0x%08lu\n", esr & ESR_ELx_ISS_MASK);
+		pr_alert("  ISV = 0, ISS = 0x%08lx\n", esr & ESR_ELx_ISS_MASK);
 	}
 
 	pr_alert("  CM = %lu, WnR = %lu\n",
@@ -651,7 +651,7 @@ static const struct fault_info fault_info[] = {
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 0 translation fault"	},
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
 	{ do_bad,		SIGBUS,  0,		"unknown 8"			},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},

arch/m32r/Kconfig

@@ -194,6 +194,10 @@ config TIMER_DIVIDE
 	int "Timer divider (integer)"
 	default "128"
 
+config CPU_BIG_ENDIAN
+        bool "Generate big endian code"
+	default n
+
 config CPU_LITTLE_ENDIAN
         bool "Generate little endian code"
 	default n

arch/m32r/kernel/traps.c

@@ -114,6 +114,15 @@ static void set_eit_vector_entries(void)
 	_flush_cache_copyback_all();
 }
 
+void abort(void)
+{
+	BUG();
+
+	/* if that doesn't kill us, halt */
+	panic("Oops failed to kill thread");
+}
+EXPORT_SYMBOL(abort);
+
 void __init trap_init(void)
 {
 	set_eit_vector_entries();

arch/mips/include/asm/cmpxchg.h

@@ -155,14 +155,16 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 		return __cmpxchg_small(ptr, old, new, size);
 
 	case 4:
-		return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr, old, new);
+		return __cmpxchg_asm("ll", "sc", (volatile u32 *)ptr,
+				     (u32)old, new);
 
 	case 8:
 		/* lld/scd are only available for MIPS64 */
 		if (!IS_ENABLED(CONFIG_64BIT))
 			return __cmpxchg_called_with_bad_pointer();
 
-		return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr, old, new);
+		return __cmpxchg_asm("lld", "scd", (volatile u64 *)ptr,
+				     (u64)old, new);
 
 	default:
 		return __cmpxchg_called_with_bad_pointer();

arch/mips/loongson32/common/platform.c

@@ -183,18 +183,20 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 }
 
 static struct plat_stmmacenet_data ls1x_eth0_pdata = {
-	.bus_id		= 0,
-	.phy_addr	= -1,
+	.bus_id			= 0,
+	.phy_addr		= -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
-	.interface	= PHY_INTERFACE_MODE_MII,
+	.interface		= PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
-	.interface	= PHY_INTERFACE_MODE_RMII,
+	.interface		= PHY_INTERFACE_MODE_RMII,
 #endif
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth0_resources[] = {
@@ -222,14 +224,16 @@ struct platform_device ls1x_eth0_pdev = {
 
 #ifdef CONFIG_LOONGSON1_LS1B
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
-	.bus_id		= 1,
-	.phy_addr	= -1,
-	.interface	= PHY_INTERFACE_MODE_MII,
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.bus_id			= 1,
+	.phy_addr		= -1,
+	.interface		= PHY_INTERFACE_MODE_MII,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth1_resources[] = {

arch/mips/math-emu/cp1emu.c

@@ -2558,7 +2558,6 @@ dcopuop:
 					break;
 				default:
 					/* Reserved R6 ops */
-					pr_err("Reserved MIPS R6 CMP.condn.S operation\n");
 					return SIGILL;
 				}
 			}
@@ -2719,7 +2718,6 @@ dcopuop:
 					break;
 				default:
 					/* Reserved R6 ops */
-					pr_err("Reserved MIPS R6 CMP.condn.D operation\n");
 					return SIGILL;
 				}
 			}

arch/mips/net/ebpf_jit.c

@@ -667,7 +667,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 {
 	int src, dst, r, td, ts, mem_off, b_off;
 	bool need_swap, did_move, cmp_eq;
-	unsigned int target;
+	unsigned int target = 0;
 	u64 t64;
 	s64 t64s;
 	int bpf_op = BPF_OP(insn->code);

arch/mips/tools/generic-board-config.sh

@@ -30,8 +30,6 @@ cfg="$4"
 boards_origin="$5"
 shift 5
 
-cd "${srctree}"
-
 # Only print Skipping... lines if the user explicitly specified BOARDS=. In the
 # general case it only serves to obscure the useful output about what actually
 # was included.
@@ -48,7 +46,7 @@ environment*)
 esac
 
 for board in $@; do
-	board_cfg="arch/mips/configs/generic/board-${board}.config"
+	board_cfg="${srctree}/arch/mips/configs/generic/board-${board}.config"
 	if [ ! -f "${board_cfg}" ]; then
 		echo "WARNING: Board config '${board_cfg}' not found"
 		continue
@@ -84,7 +82,7 @@ for board in $@; do
 	done || continue
 
 	# Merge this board config fragment into our final config file
-	./scripts/kconfig/merge_config.sh \
+	${srctree}/scripts/kconfig/merge_config.sh \
 		-m -O ${objtree} ${cfg} ${board_cfg} \
 		| grep -Ev '^(#|Using)'
 done

arch/parisc/kernel/process.c

@@ -146,7 +146,7 @@ void machine_power_off(void)
 
 	/* prevent soft lockup/stalled CPU messages for endless loop. */
 	rcu_sysrq_start();
-	lockup_detector_suspend();
+	lockup_detector_soft_poweroff();
 	for (;;);
 }
 

arch/powerpc/kernel/dt_cpu_ftrs.c

@@ -102,10 +102,10 @@ static void cpufeatures_flush_tlb(void)
 	case PVR_POWER8:
 	case PVR_POWER8E:
 	case PVR_POWER8NVL:
-		__flush_tlb_power8(POWER8_TLB_SETS);
+		__flush_tlb_power8(TLB_INVAL_SCOPE_GLOBAL);
 		break;
 	case PVR_POWER9:
-		__flush_tlb_power9(POWER9_TLB_SETS_HASH);
+		__flush_tlb_power9(TLB_INVAL_SCOPE_GLOBAL);
 		break;
 	default:
 		pr_err("unknown CPU version for boot TLB flush\n");

arch/powerpc/kernel/exceptions-64s.S

@@ -734,7 +734,29 @@ EXC_REAL(program_check, 0x700, 0x100)
 EXC_VIRT(program_check, 0x4700, 0x100, 0x700)
 TRAMP_KVM(PACA_EXGEN, 0x700)
 EXC_COMMON_BEGIN(program_check_common)
-	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+	/*
+	 * It's possible to receive a TM Bad Thing type program check with
+	 * userspace register values (in particular r1), but with SRR1 reporting
+	 * that we came from the kernel. Normally that would confuse the bad
+	 * stack logic, and we would report a bad kernel stack pointer. Instead
+	 * we switch to the emergency stack if we're taking a TM Bad Thing from
+	 * the kernel.
+	 */
+	li	r10,MSR_PR		/* Build a mask of MSR_PR ..	*/
+	oris	r10,r10,0x200000@h	/* .. and SRR1_PROGTM		*/
+	and	r10,r10,r12		/* Mask SRR1 with that.		*/
+	srdi	r10,r10,8		/* Shift it so we can compare	*/
+	cmpldi	r10,(0x200000 >> 8)	/* .. with an immediate.	*/
+	bne 1f				/* If != go to normal path.	*/
+
+	/* SRR1 had PR=0 and SRR1_PROGTM=1, so use the emergency stack	*/
+	andi.	r10,r12,MSR_PR;		/* Set CR0 correctly for label	*/
+					/* 3 in EXCEPTION_PROLOG_COMMON	*/
+	mr	r10,r1			/* Save r1			*/
+	ld	r1,PACAEMERGSP(r13)	/* Use emergency stack		*/
+	subi	r1,r1,INT_FRAME_SIZE	/* alloc stack frame		*/
+	b 3f				/* Jump into the macro !!	*/
+1:	EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
 	bl	save_nvgprs
 	RECONCILE_IRQ_STATE(r10, r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD

arch/powerpc/kernel/mce_power.c

@@ -624,5 +624,18 @@ long __machine_check_early_realmode_p8(struct pt_regs *regs)
 
 long __machine_check_early_realmode_p9(struct pt_regs *regs)
 {
+	/*
+	 * On POWER9 DD2.1 and below, it's possible to get a machine check
+	 * caused by a paste instruction where only DSISR bit 25 is set. This
+	 * will result in the MCE handler seeing an unknown event and the kernel
+	 * crashing. An MCE that occurs like this is spurious, so we don't need
+	 * to do anything in terms of servicing it. If there is something that
+	 * needs to be serviced, the CPU will raise the MCE again with the
+	 * correct DSISR so that it can be serviced properly. So detect this
+	 * case and mark it as handled.
+	 */
+	if (SRR1_MC_LOADSTORE(regs->msr) && regs->dsisr == 0x02000000)
+		return 1;
+
 	return mce_handle_error(regs, mce_p9_derror_table, mce_p9_ierror_table);
 }

arch/powerpc/kernel/setup-common.c

@@ -904,9 +904,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 
-#ifdef CONFIG_PPC_64K_PAGES
-	init_mm.context.pte_frag = NULL;
-#endif
 #ifdef CONFIG_SPAPR_TCE_IOMMU
 	mm_iommu_init(&init_mm);
 #endif

arch/powerpc/kernel/signal_64.c

@@ -452,9 +452,20 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
 	if (MSR_TM_RESV(msr))
 		return -EINVAL;
 
-	/* pull in MSR TM from user context */
+	/* pull in MSR TS bits from user context */
 	regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
 
+	/*
+	 * Ensure that TM is enabled in regs->msr before we leave the signal
+	 * handler. It could be the case that (a) user disabled the TM bit
+	 * through the manipulation of the MSR bits in uc_mcontext or (b) the
+	 * TM bit was disabled because a sufficient number of context switches
+	 * happened whilst in the signal handler and load_tm overflowed,
+	 * disabling the TM bit. In either case we can end up with an illegal
+	 * TM state leading to a TM Bad Thing when we return to userspace.
+	 */
+	regs->msr |= MSR_TM;
+
 	/* pull in MSR LE from user context */
 	regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 

arch/powerpc/kernel/trace/ftrace_64_mprofile.S

@@ -181,34 +181,25 @@ _GLOBAL(ftrace_stub)
 	 *  - we have no stack frame and can not allocate one
 	 *  - LR points back to the original caller (in A)
 	 *  - CTR holds the new NIP in C
-	 *  - r0 & r12 are free
-	 *
-	 * r0 can't be used as the base register for a DS-form load or store, so
-	 * we temporarily shuffle r1 (stack pointer) into r0 and then put it back.
+	 *  - r0, r11 & r12 are free
 	 */
 livepatch_handler:
 	CURRENT_THREAD_INFO(r12, r1)
 
-	/* Save stack pointer into r0 */
-	mr	r0, r1
-
 	/* Allocate 3 x 8 bytes */
-	ld	r1, TI_livepatch_sp(r12)
-	addi	r1, r1, 24
-	std	r1, TI_livepatch_sp(r12)
+	ld	r11, TI_livepatch_sp(r12)
+	addi	r11, r11, 24
+	std	r11, TI_livepatch_sp(r12)
 
 	/* Save toc & real LR on livepatch stack */
-	std	r2,  -24(r1)
+	std	r2,  -24(r11)
 	mflr	r12
-	std	r12, -16(r1)
+	std	r12, -16(r11)
 
 	/* Store stack end marker */
 	lis     r12, STACK_END_MAGIC@h
 	ori     r12, r12, STACK_END_MAGIC@l
-	std	r12, -8(r1)
-
-	/* Restore real stack pointer */
-	mr	r1, r0
+	std	r12, -8(r11)
 
 	/* Put ctr in r12 for global entry and branch there */
 	mfctr	r12
@@ -216,36 +207,30 @@ livepatch_handler:
 
 	/*
 	 * Now we are returning from the patched function to the original
-	 * caller A. We are free to use r0 and r12, and we can use r2 until we
+	 * caller A. We are free to use r11, r12 and we can use r2 until we
 	 * restore it.
 	 */
 
 	CURRENT_THREAD_INFO(r12, r1)
 
-	/* Save stack pointer into r0 */
-	mr	r0, r1
-
-	ld	r1, TI_livepatch_sp(r12)
+	ld	r11, TI_livepatch_sp(r12)
 
 	/* Check stack marker hasn't been trashed */
 	lis     r2,  STACK_END_MAGIC@h
 	ori     r2,  r2, STACK_END_MAGIC@l
-	ld	r12, -8(r1)
+	ld	r12, -8(r11)
 1:	tdne	r12, r2
 	EMIT_BUG_ENTRY 1b, __FILE__, __LINE__ - 1, 0
 
 	/* Restore LR & toc from livepatch stack */
-	ld	r12, -16(r1)
+	ld	r12, -16(r11)
 	mtlr	r12
-	ld	r2,  -24(r1)
+	ld	r2,  -24(r11)
 
 	/* Pop livepatch stack frame */
-	CURRENT_THREAD_INFO(r12, r0)
-	subi	r1, r1, 24
-	std	r1, TI_livepatch_sp(r12)
-
-	/* Restore real stack pointer */
-	mr	r1, r0
+	CURRENT_THREAD_INFO(r12, r1)
+	subi	r11, r11, 24
+	std	r11, TI_livepatch_sp(r12)
 
 	/* Return to original caller of live patched function */
 	blr

arch/powerpc/kernel/watchdog.c

@@ -310,9 +310,6 @@ static int start_wd_on_cpu(unsigned int cpu)
 	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
 		return 0;
 
-	if (watchdog_suspended)
-		return 0;
-
 	if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
 		return 0;
 
@@ -358,36 +355,39 @@ static void watchdog_calc_timeouts(void)
 	wd_timer_period_ms = watchdog_thresh * 1000 * 2 / 5;
 }
 
-void watchdog_nmi_reconfigure(void)
+void watchdog_nmi_stop(void)
 {
 	int cpu;
 
-	watchdog_calc_timeouts();
-
 	for_each_cpu(cpu, &wd_cpus_enabled)
 		stop_wd_on_cpu(cpu);
+}
 
+void watchdog_nmi_start(void)
+{
+	int cpu;
+
+	watchdog_calc_timeouts();
 	for_each_cpu_and(cpu, cpu_online_mask, &watchdog_cpumask)
 		start_wd_on_cpu(cpu);
 }
 
 /*
- * This runs after lockup_detector_init() which sets up watchdog_cpumask.
+ * Invoked from core watchdog init.
  */
-static int __init powerpc_watchdog_init(void)
+int __init watchdog_nmi_probe(void)
 {
 	int err;
 
-	watchdog_calc_timeouts();
-
-	err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powerpc/watchdog:online",
-				start_wd_on_cpu, stop_wd_on_cpu);
-	if (err < 0)
+	err = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+					"powerpc/watchdog:online",
+					start_wd_on_cpu, stop_wd_on_cpu);
+	if (err < 0) {
 		pr_warn("Watchdog could not be initialized");
-
+		return err;
+	}
 	return 0;
 }
-arch_initcall(powerpc_watchdog_init);
 
 static void handle_backtrace_ipi(struct pt_regs *regs)
 {

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -1121,6 +1121,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 BEGIN_FTR_SECTION
 	mtspr	SPRN_PPR, r0
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+
+/* Move canary into DSISR to check for later */
+BEGIN_FTR_SECTION
+	li	r0, 0x7fff
+	mtspr	SPRN_HDSISR, r0
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
 	ld	r0, VCPU_GPR(R0)(r4)
 	ld	r4, VCPU_GPR(R4)(r4)
 
@@ -1956,9 +1963,14 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
 kvmppc_hdsi:
 	ld	r3, VCPU_KVM(r9)
 	lbz	r0, KVM_RADIX(r3)
-	cmpwi	r0, 0
 	mfspr	r4, SPRN_HDAR
 	mfspr	r6, SPRN_HDSISR
+BEGIN_FTR_SECTION
+	/* Look for DSISR canary. If we find it, retry instruction */
+	cmpdi	r6, 0x7fff
+	beq	6f
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+	cmpwi	r0, 0
 	bne	.Lradix_hdsi		/* on radix, just save DAR/DSISR/ASDR */
 	/* HPTE not found fault or protection fault? */
 	andis.	r0, r6, (DSISR_NOHPTE | DSISR_PROTFAULT)@h

arch/powerpc/kvm/book3s_xive.c

@@ -622,7 +622,7 @@ int kvmppc_xive_get_xive(struct kvm *kvm, u32 irq, u32 *server,
 		return -EINVAL;
 	state = &sb->irq_state[idx];
 	arch_spin_lock(&sb->lock);
-	*server = state->guest_server;
+	*server = state->act_server;
 	*priority = state->guest_priority;
 	arch_spin_unlock(&sb->lock);
 
@@ -1331,7 +1331,7 @@ static int xive_get_source(struct kvmppc_xive *xive, long irq, u64 addr)
 	xive->saved_src_count++;
 
 	/* Convert saved state into something compatible with xics */
-	val = state->guest_server;
+	val = state->act_server;
 	prio = state->saved_scan_prio;
 
 	if (prio == MASKED) {
@@ -1507,7 +1507,6 @@ static int xive_set_source(struct kvmppc_xive *xive, long irq, u64 addr)
 	/* First convert prio and mark interrupt as untargetted */
 	act_prio = xive_prio_from_guest(guest_prio);
 	state->act_priority = MASKED;
-	state->guest_server = server;
 
 	/*
 	 * We need to drop the lock due to the mutex below. Hopefully

arch/powerpc/kvm/book3s_xive.h

@@ -35,7 +35,6 @@ struct kvmppc_xive_irq_state {
 	struct xive_irq_data *pt_data;	/* XIVE Pass-through associated data */
 
 	/* Targetting as set by guest */
-	u32 guest_server;		/* Current guest selected target */
 	u8 guest_priority;		/* Guest set priority */
 	u8 saved_priority;		/* Saved priority when masking */