Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus

CREDITS

@@ -655,6 +655,11 @@ S: Stanford University
 S: Stanford, California 94305
 S: USA
 
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker

Documentation/ABI/stable/sysfs-driver-ib_srp

@@ -61,6 +61,12 @@ Description:	Interface for making ib_srp connect to a new target.
 		  interrupt is handled by a different CPU then the comp_vector
 		  parameter can be used to spread the SRP completion workload
 		  over multiple CPU's.
+		* tl_retry_count, a number in the range 2..7 specifying the
+		  IB RC retry count.
+		* queue_size, the maximum number of commands that the
+		  initiator is allowed to queue per SCSI host. The default
+		  value for this parameter is 62. The lowest supported value
+		  is 2.
 
 What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
 Date:		January 2, 2006
@@ -153,6 +159,13 @@ Contact:	linux-rdma@vger.kernel.org
 Description:	InfiniBand service ID used for establishing communication with
 		the SRP	target.
 
+What:		/sys/class/scsi_host/host<n>/sgid
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand GID of the source port used for communication with
+		the SRP target.
+
 What:		/sys/class/scsi_host/host<n>/zero_req_lim
 Date:		September 20, 2006
 KernelVersion:	2.6.18

Documentation/ABI/stable/sysfs-transport-srp

@@ -5,6 +5,24 @@ Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
 Description:	Instructs an SRP initiator to disconnect from a target and to
 		remove all LUNs imported from that target.
 
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before removing a target port.
+		Zero means immediate removal. Setting this attribute to "off"
+		will disable the dev_loss timer.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before failing I/O. Zero means
+		failing I/O immediately. Setting this attribute to "off" will
+		disable the fast_io_fail timer.
+
 What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
 Date:		June 27, 2007
 KernelVersion:	2.6.24
@@ -12,8 +30,29 @@ Contact:	linux-scsi@vger.kernel.org
 Description:	16-byte local SRP port identifier in hexadecimal format. An
 		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
 
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a reconnect
+		attempt failed before retrying. Setting this attribute to
+		"off" will disable time-based reconnecting.
+
 What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
 Date:		June 27, 2007
 KernelVersion:	2.6.24
 Contact:	linux-scsi@vger.kernel.org
 Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/state
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	State of the transport layer used for communication with the
+		remote port. "running" if the transport layer is operational;
+		"blocked" if a transport layer error has been encountered but
+		the fast_io_fail_tmo timer has not yet fired; "fail-fast"
+		after the fast_io_fail_tmo timer has fired and before the
+		"dev_loss_tmo" timer has fired; "lost" after the
+		"dev_loss_tmo" timer has fired and before the port is finally
+		removed.

Documentation/Changes

@@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
 as root before you can use this.  You'll probably also want to
 get the user-space microcode_ctl utility to use with this.
 
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
 udev
 ----
 udev is a userspace application for populating /dev dynamically with
@@ -366,10 +359,6 @@ Intel P6 microcode
 ------------------
 o  <http://www.urbanmyth.org/microcode/>
 
-Powertweak
-----------
-o  <http://powertweak.sourceforge.net/>
-
 udev
 ----
 o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>

Documentation/DocBook/device-drivers.tmpl

@@ -58,7 +58,7 @@
      </sect1>
      <sect1><title>Wait queues and Wake events</title>
 !Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
      </sect1>
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
 format. For the single-planar API, applications must set <structfield> plane
 </structfield> to zero.  Additional flags may be posted in the <structfield>
 flags </structfield> field.  Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported.  All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported.  All
+other fields must be set to zero.
 In the case of multi-planar API, every plane is exported separately using
 multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
 
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>flags</structfield></entry>
 	    <entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
-details.</entry>
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
 	  </row>
 	  <row>
 	    <entry>__s32</entry>

Documentation/assoc_array.txt

@@ -0,0 +1,574 @@
+		   ========================================
+		   GENERIC ASSOCIATIVE ARRAY IMPLEMENTATION
+		   ========================================
+
+Contents:
+
+ - Overview.
+
+ - The public API.
+   - Edit script.
+   - Operations table.
+   - Manipulation functions.
+   - Access functions.
+   - Index key form.
+
+ - Internal workings.
+   - Basic internal tree layout.
+   - Shortcuts.
+   - Splitting and collapsing nodes.
+   - Non-recursive iteration.
+   - Simultaneous alteration and iteration.
+
+
+========
+OVERVIEW
+========
+
+This associative array implementation is an object container with the following
+properties:
+
+ (1) Objects are opaque pointers.  The implementation does not care where they
+     point (if anywhere) or what they point to (if anything).
+
+     [!] NOTE: Pointers to objects _must_ be zero in the least significant bit.
+
+ (2) Objects do not need to contain linkage blocks for use by the array.  This
+     permits an object to be located in multiple arrays simultaneously.
+     Rather, the array is made up of metadata blocks that point to objects.
+
+ (3) Objects require index keys to locate them within the array.
+
+ (4) Index keys must be unique.  Inserting an object with the same key as one
+     already in the array will replace the old object.
+
+ (5) Index keys can be of any length and can be of different lengths.
+
+ (6) Index keys should encode the length early on, before any variation due to
+     length is seen.
+
+ (7) Index keys can include a hash to scatter objects throughout the array.
+
+ (8) The array can iterated over.  The objects will not necessarily come out in
+     key order.
+
+ (9) The array can be iterated over whilst it is being modified, provided the
+     RCU readlock is being held by the iterator.  Note, however, under these
+     circumstances, some objects may be seen more than once.  If this is a
+     problem, the iterator should lock against modification.  Objects will not
+     be missed, however, unless deleted.
+
+(10) Objects in the array can be looked up by means of their index key.
+
+(11) Objects can be looked up whilst the array is being modified, provided the
+     RCU readlock is being held by the thread doing the look up.
+
+The implementation uses a tree of 16-pointer nodes internally that are indexed
+on each level by nibbles from the index key in the same manner as in a radix
+tree.  To improve memory efficiency, shortcuts can be emplaced to skip over
+what would otherwise be a series of single-occupancy nodes.  Further, nodes
+pack leaf object pointers into spare space in the node rather than making an
+extra branch until as such time an object needs to be added to a full node.
+
+
+==============
+THE PUBLIC API
+==============
+
+The public API can be found in <linux/assoc_array.h>.  The associative array is
+rooted on the following structure:
+
+	struct assoc_array {
+		...
+	};
+
+The code is selected by enabling CONFIG_ASSOCIATIVE_ARRAY.
+
+
+EDIT SCRIPT
+-----------
+
+The insertion and deletion functions produce an 'edit script' that can later be
+applied to effect the changes without risking ENOMEM.  This retains the
+preallocated metadata blocks that will be installed in the internal tree and
+keeps track of the metadata blocks that will be removed from the tree when the
+script is applied.
+
+This is also used to keep track of dead blocks and dead objects after the
+script has been applied so that they can be freed later.  The freeing is done
+after an RCU grace period has passed - thus allowing access functions to
+proceed under the RCU read lock.
+
+The script appears as outside of the API as a pointer of the type:
+
+	struct assoc_array_edit;
+
+There are two functions for dealing with the script:
+
+ (1) Apply an edit script.
+
+	void assoc_array_apply_edit(struct assoc_array_edit *edit);
+
+     This will perform the edit functions, interpolating various write barriers
+     to permit accesses under the RCU read lock to continue.  The edit script
+     will then be passed to call_rcu() to free it and any dead stuff it points
+     to.
+
+ (2) Cancel an edit script.
+
+	void assoc_array_cancel_edit(struct assoc_array_edit *edit);
+
+     This frees the edit script and all preallocated memory immediately.  If
+     this was for insertion, the new object is _not_ released by this function,
+     but must rather be released by the caller.
+
+These functions are guaranteed not to fail.
+
+
+OPERATIONS TABLE
+----------------
+
+Various functions take a table of operations:
+
+	struct assoc_array_ops {
+		...
+	};
+
+This points to a number of methods, all of which need to be provided:
+
+ (1) Get a chunk of index key from caller data:
+
+	unsigned long (*get_key_chunk)(const void *index_key, int level);
+
+     This should return a chunk of caller-supplied index key starting at the
+     *bit* position given by the level argument.  The level argument will be a
+     multiple of ASSOC_ARRAY_KEY_CHUNK_SIZE and the function should return
+     ASSOC_ARRAY_KEY_CHUNK_SIZE bits.  No error is possible.
+
+
+ (2) Get a chunk of an object's index key.
+
+	unsigned long (*get_object_key_chunk)(const void *object, int level);
+
+     As the previous function, but gets its data from an object in the array
+     rather than from a caller-supplied index key.
+
+
+ (3) See if this is the object we're looking for.
+
+	bool (*compare_object)(const void *object, const void *index_key);
+
+     Compare the object against an index key and return true if it matches and
+     false if it doesn't.
+
+
+ (4) Diff the index keys of two objects.
+
+	int (*diff_objects)(const void *object, const void *index_key);
+
+     Return the bit position at which the index key of the specified object
+     differs from the given index key or -1 if they are the same.
+
+
+ (5) Free an object.
+
+	void (*free_object)(void *object);
+
+     Free the specified object.  Note that this may be called an RCU grace
+     period after assoc_array_apply_edit() was called, so synchronize_rcu() may
+     be necessary on module unloading.
+
+
+MANIPULATION FUNCTIONS
+----------------------
+
+There are a number of functions for manipulating an associative array:
+
+ (1) Initialise an associative array.
+
+	void assoc_array_init(struct assoc_array *array);
+
+     This initialises the base structure for an associative array.  It can't
+     fail.
+
+
+ (2) Insert/replace an object in an associative array.
+
+	struct assoc_array_edit *
+	assoc_array_insert(struct assoc_array *array,
+			   const struct assoc_array_ops *ops,
+			   const void *index_key,
+			   void *object);
+
+     This inserts the given object into the array.  Note that the least
+     significant bit of the pointer must be zero as it's used to type-mark
+     pointers internally.
+
+     If an object already exists for that key then it will be replaced with the
+     new object and the old one will be freed automatically.
+
+     The index_key argument should hold index key information and is
+     passed to the methods in the ops table when they are called.
+
+     This function makes no alteration to the array itself, but rather returns
+     an edit script that must be applied.  -ENOMEM is returned in the case of
+     an out-of-memory error.
+
+     The caller should lock exclusively against other modifiers of the array.
+
+
+ (3) Delete an object from an associative array.
+
+	struct assoc_array_edit *
+	assoc_array_delete(struct assoc_array *array,
+			   const struct assoc_array_ops *ops,
+			   const void *index_key);
+
+     This deletes an object that matches the specified data from the array.
+
+     The index_key argument should hold index key information and is
+     passed to the methods in the ops table when they are called.
+
+     This function makes no alteration to the array itself, but rather returns
+     an edit script that must be applied.  -ENOMEM is returned in the case of
+     an out-of-memory error.  NULL will be returned if the specified object is
+     not found within the array.
+
+     The caller should lock exclusively against other modifiers of the array.
+
+
+ (4) Delete all objects from an associative array.
+
+	struct assoc_array_edit *
+	assoc_array_clear(struct assoc_array *array,
+			  const struct assoc_array_ops *ops);
+
+     This deletes all the objects from an associative array and leaves it
+     completely empty.
+
+     This function makes no alteration to the array itself, but rather returns
+     an edit script that must be applied.  -ENOMEM is returned in the case of
+     an out-of-memory error.
+
+     The caller should lock exclusively against other modifiers of the array.
+
+
+ (5) Destroy an associative array, deleting all objects.
+
+	void assoc_array_destroy(struct assoc_array *array,
+				 const struct assoc_array_ops *ops);
+
+     This destroys the contents of the associative array and leaves it
+     completely empty.  It is not permitted for another thread to be traversing
+     the array under the RCU read lock at the same time as this function is
+     destroying it as no RCU deferral is performed on memory release -
+     something that would require memory to be allocated.
+
+     The caller should lock exclusively against other modifiers and accessors
+     of the array.
+
+
+ (6) Garbage collect an associative array.
+
+	int assoc_array_gc(struct assoc_array *array,
+			   const struct assoc_array_ops *ops,
+			   bool (*iterator)(void *object, void *iterator_data),
+			   void *iterator_data);
+
+     This iterates over the objects in an associative array and passes each one
+     to iterator().  If iterator() returns true, the object is kept.  If it
+     returns false, the object will be freed.  If the iterator() function
+     returns true, it must perform any appropriate refcount incrementing on the
+     object before returning.
+
+     The internal tree will be packed down if possible as part of the iteration
+     to reduce the number of nodes in it.
+
+     The iterator_data is passed directly to iterator() and is otherwise
+     ignored by the function.
+
+     The function will return 0 if successful and -ENOMEM if there wasn't
+     enough memory.
+
+     It is possible for other threads to iterate over or search the array under
+     the RCU read lock whilst this function is in progress.  The caller should
+     lock exclusively against other modifiers of the array.
+
+
+ACCESS FUNCTIONS
+----------------
+
+There are two functions for accessing an associative array:
+
+ (1) Iterate over all the objects in an associative array.
+
+	int assoc_array_iterate(const struct assoc_array *array,
+				int (*iterator)(const void *object,
+						void *iterator_data),
+				void *iterator_data);
+
+     This passes each object in the array to the iterator callback function.
+     iterator_data is private data for that function.
+
+     This may be used on an array at the same time as the array is being
+     modified, provided the RCU read lock is held.  Under such circumstances,
+     it is possible for the iteration function to see some objects twice.  If
+     this is a problem, then modification should be locked against.  The
+     iteration algorithm should not, however, miss any objects.
+
+     The function will return 0 if no objects were in the array or else it will
+     return the result of the last iterator function called.  Iteration stops
+     immediately if any call to the iteration function results in a non-zero
+     return.
+
+
+ (2) Find an object in an associative array.
+
+	void *assoc_array_find(const struct assoc_array *array,
+			       const struct assoc_array_ops *ops,
+			       const void *index_key);
+
+     This walks through the array's internal tree directly to the object
+     specified by the index key..
+
+     This may be used on an array at the same time as the array is being
+     modified, provided the RCU read lock is held.
+
+     The function will return the object if found (and set *_type to the object
+     type) or will return NULL if the object was not found.
+
+
+INDEX KEY FORM
+--------------
+
+The index key can be of any form, but since the algorithms aren't told how long
+the key is, it is strongly recommended that the index key includes its length
+very early on before any variation due to the length would have an effect on
+comparisons.
+
+This will cause leaves with different length keys to scatter away from each
+other - and those with the same length keys to cluster together.
+
+It is also recommended that the index key begin with a hash of the rest of the
+key to maximise scattering throughout keyspace.
+
+The better the scattering, the wider and lower the internal tree will be.
+
+Poor scattering isn't too much of a problem as there are shortcuts and nodes
+can contain mixtures of leaves and metadata pointers.
+
+The index key is read in chunks of machine word.  Each chunk is subdivided into
+one nibble (4 bits) per level, so on a 32-bit CPU this is good for 8 levels and
+on a 64-bit CPU, 16 levels.  Unless the scattering is really poor, it is
+unlikely that more than one word of any particular index key will have to be
+used.
+
+
+=================
+INTERNAL WORKINGS
+=================
+
+The associative array data structure has an internal tree.  This tree is
+constructed of two types of metadata blocks: nodes and shortcuts.
+
+A node is an array of slots.  Each slot can contain one of four things:
+
+ (*) A NULL pointer, indicating that the slot is empty.
+
+ (*) A pointer to an object (a leaf).
+
+ (*) A pointer to a node at the next level.
+
+ (*) A pointer to a shortcut.
+
+
+BASIC INTERNAL TREE LAYOUT
+--------------------------
+
+Ignoring shortcuts for the moment, the nodes form a multilevel tree.  The index
+key space is strictly subdivided by the nodes in the tree and nodes occur on
+fixed levels.  For example:
+
+ Level:	0		1		2		3
+	===============	===============	===============	===============
+							NODE D
+			NODE B		NODE C	+------>+---+
+		+------>+---+	+------>+---+	|	| 0 |
+	NODE A	|	| 0 |	|	| 0 |	|	+---+
+	+---+	|	+---+	|	+---+	|	:   :
+	| 0 |	|	:   :	|	:   :	|	+---+
+	+---+	|	+---+	|	+---+	|	| f |
+	| 1 |---+	| 3 |---+	| 7 |---+	+---+
+	+---+		+---+		+---+
+	:   :		:   :		| 8 |---+
+	+---+		+---+		+---+	|	NODE E
+	| e |---+	| f |		:   :   +------>+---+
+	+---+	|	+---+		+---+		| 0 |
+	| f |	|			| f |		+---+
+	+---+	|			+---+		:   :
+		|	NODE F				+---+
+		+------>+---+				| f |
+			| 0 |		NODE G		+---+
+			+---+	+------>+---+
+			:   :	|	| 0 |
+			+---+	|	+---+
+			| 6 |---+	:   :
+			+---+		+---+
+			:   :		| f |
+			+---+		+---+
+			| f |
+			+---+
+
+In the above example, there are 7 nodes (A-G), each with 16 slots (0-f).
+Assuming no other meta data nodes in the tree, the key space is divided thusly:
+
+	KEY PREFIX	NODE
+	==========	====
+	137*		D
+	138*		E
+	13[0-69-f]*	C
+	1[0-24-f]*	B
+	e6*		G
+	e[0-57-f]*	F
+	[02-df]*	A
+
+So, for instance, keys with the following example index keys will be found in
+the appropriate nodes:
+
+	INDEX KEY	PREFIX	NODE
+	===============	=======	====
+	13694892892489	13	C
+	13795289025897	137	D
+	13889dde88793	138	E
+	138bbb89003093	138	E
+	1394879524789	12	C
+	1458952489	1	B
+	9431809de993ba	-	A
+	b4542910809cd	-	A
+	e5284310def98	e	F
+	e68428974237	e6	G
+	e7fffcbd443	e	F
+	f3842239082	-	A
+
+To save memory, if a node can hold all the leaves in its portion of keyspace,
+then the node will have all those leaves in it and will not have any metadata
+pointers - even if some of those leaves would like to be in the same slot.
+
+A node can contain a heterogeneous mix of leaves and metadata pointers.
+Metadata pointers must be in the slots that match their subdivisions of key
+space.  The leaves can be in any slot not occupied by a metadata pointer.  It
+is guaranteed that none of the leaves in a node will match a slot occupied by a
+metadata pointer.  If the metadata pointer is there, any leaf whose key matches
+the metadata key prefix must be in the subtree that the metadata pointer points
+to.
+
+In the above example list of index keys, node A will contain:
+
+	SLOT	CONTENT		INDEX KEY (PREFIX)
+	====	===============	==================
+	1	PTR TO NODE B	1*
+	any	LEAF		9431809de993ba
+	any	LEAF		b4542910809cd
+	e	PTR TO NODE F	e*
+	any	LEAF		f3842239082
+
+and node B:
+
+	3	PTR TO NODE C	13*
+	any	LEAF		1458952489
+
+
+SHORTCUTS
+---------
+
+Shortcuts are metadata records that jump over a piece of keyspace.  A shortcut
+is a replacement for a series of single-occupancy nodes ascending through the
+levels.  Shortcuts exist to save memory and to speed up traversal.
+
+It is possible for the root of the tree to be a shortcut - say, for example,
+the tree contains at least 17 nodes all with key prefix '1111'.  The insertion
+algorithm will insert a shortcut to skip over the '1111' keyspace in a single
+bound and get to the fourth level where these actually become different.
+
+
+SPLITTING AND COLLAPSING NODES
+------------------------------
+
+Each node has a maximum capacity of 16 leaves and metadata pointers.  If the
+insertion algorithm finds that it is trying to insert a 17th object into a
+node, that node will be split such that at least two leaves that have a common
+key segment at that level end up in a separate node rooted on that slot for
+that common key segment.
+
+If the leaves in a full node and the leaf that is being inserted are
+sufficiently similar, then a shortcut will be inserted into the tree.
+
+When the number of objects in the subtree rooted at a node falls to 16 or
+fewer, then the subtree will be collapsed down to a single node - and this will
+ripple towards the root if possible.
+
+
+NON-RECURSIVE ITERATION
+-----------------------
+
+Each node and shortcut contains a back pointer to its parent and the number of
+slot in that parent that points to it.  None-recursive iteration uses these to
+proceed rootwards through the tree, going to the parent node, slot N + 1 to
+make sure progress is made without the need for a stack.
+
+The backpointers, however, make simultaneous alteration and iteration tricky.
+
+
+SIMULTANEOUS ALTERATION AND ITERATION
+-------------------------------------
+
+There are a number of cases to consider:
+
+ (1) Simple insert/replace.  This involves simply replacing a NULL or old
+     matching leaf pointer with the pointer to the new leaf after a barrier.
+     The metadata blocks don't change otherwise.  An old leaf won't be freed
+     until after the RCU grace period.
+
+ (2) Simple delete.  This involves just clearing an old matching leaf.  The
+     metadata blocks don't change otherwise.  The old leaf won't be freed until
+     after the RCU grace period.
+
+ (3) Insertion replacing part of a subtree that we haven't yet entered.  This
+     may involve replacement of part of that subtree - but that won't affect
+     the iteration as we won't have reached the pointer to it yet and the
+     ancestry blocks are not replaced (the layout of those does not change).
+
+ (4) Insertion replacing nodes that we're actively processing.  This isn't a
+     problem as we've passed the anchoring pointer and won't switch onto the
+     new layout until we follow the back pointers - at which point we've
+     already examined the leaves in the replaced node (we iterate over all the
+     leaves in a node before following any of its metadata pointers).
+
+     We might, however, re-see some leaves that have been split out into a new
+     branch that's in a slot further along than we were at.
+
+ (5) Insertion replacing nodes that we're processing a dependent branch of.
+     This won't affect us until we follow the back pointers.  Similar to (4).
+
+ (6) Deletion collapsing a branch under us.  This doesn't affect us because the
+     back pointers will get us back to the parent of the new node before we
+     could see the new node.  The entire collapsed subtree is thrown away
+     unchanged - and will still be rooted on the same slot, so we shouldn't
+     process it a second time as we'll go back to slot + 1.
+
+Note:
+
+ (*) Under some circumstances, we need to simultaneously change the parent
+     pointer and the parent slot pointer on a node (say, for example, we
+     inserted another node before it and moved it up a level).  We cannot do
+     this without locking against a read - so we have to replace that node too.
+
+     However, when we're changing a shortcut into a node this isn't a problem
+     as shortcuts only have one slot and so the parent slot number isn't used
+     when traversing backwards over one.  This means that it's okay to change
+     the slot number first - provided suitable barriers are used to make sure
+     the parent slot number is read after the back pointer.
+
+Obsolete blocks and leaves are freed up after an RCU grace period has passed,
+so as long as anyone doing walking or iteration holds the RCU read lock, the
+old superstructure should not go away on them.

Documentation/devicetree/bindings/arc/pmu.txt

@@ -0,0 +1,24 @@
+* ARC Performance Monitor Unit
+
+The ARC 700 can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits.
+
+Note that:
+ * ARC 700 refers to a family of ARC processor cores;
+   - There is only one type of PMU available for the whole family;
+   - The PMU may support different sets of events; supported events are probed
+     at boot time, as required by the reference manual.
+
+ * The ARC 700 PMU does not support interrupts; although HW events may be
+   counted, the HW events themselves cannot serve as a trigger for a sample.
+
+Required properties:
+
+- compatible : should contain
+	"snps,arc700-pmu"
+
+Example:
+
+pmu {
+        compatible = "snps,arc700-pmu";
+};

Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt

@@ -1,7 +1,9 @@
 Calxeda DDR memory controller
 
 Properties:
-- compatible : Should be "calxeda,hb-ddr-ctrl"
+- compatible : Should be:
+  - "calxeda,hb-ddr-ctrl" for ECX-1000
+  - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
 - reg : Address and size for DDR controller registers.
 - interrupts : Interrupt for DDR controller.
 

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/crypto/omap-des.txt

@@ -0,0 +1,30 @@
+OMAP SoC DES crypto Module
+
+Required properties:
+
+- compatible : Should contain "ti,omap4-des"
+- ti,hwmods: Name of the hwmod associated with the DES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the DES module
+- clocks : A phandle to the functional clock node of the DES module
+           corresponding to each entry in clock-names
+- clock-names : Name of the functional clock, should be "fck"
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+	Each entry corresponds to an entry in dma-names
+- dma-names: DMA request names should include "tx" and "rx" if present
+
+Example:
+	/* DRA7xx SoC */
+	des: des@480a5000 {
+		compatible = "ti,omap4-des";
+		ti,hwmods = "des";
+		reg = <0x480a5000 0xa0>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&sdma 117>, <&sdma 116>;
+		dma-names = "tx", "rx";
+		clocks = <&l3_iclk_div>;
+		clock-names = "fck";
+	};

Documentation/devicetree/bindings/crypto/omap-sham.txt

@@ -6,7 +6,7 @@ Required properties:
   SHAM versions:
   - "ti,omap2-sham" for OMAP2 & OMAP3.
   - "ti,omap4-sham" for OMAP4 and AM33XX.
-  Note that these two versions are incompatible.
+  - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
 - ti,hwmods: Name of the hwmod associated with the SHAM module
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt-specifier for the SHAM module.

Documentation/devicetree/bindings/dma/atmel-dma.txt

@@ -28,7 +28,7 @@ The three cells in order are:
 dependent:
   - bit 7-0: peripheral identifier for the hardware handshaking interface. The
   identifier can be different for tx and rx.
-  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
+  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
 
 Example:
 

Documentation/devicetree/bindings/gpio/8xxx_gpio.txt

@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};

Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt

@@ -0,0 +1,35 @@
+Broadcom Kona Family I2C
+=========================
+
+This I2C controller is used in the following Broadcom SoCs:
+
+  BCM11130
+  BCM11140
+  BCM11351
+  BCM28145
+  BCM28155
+
+Required Properties
+-------------------
+- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: The interrupt number used by the controller
+- clocks: clock specifier for the kona i2c external clock
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Refer to clocks/clock-bindings.txt for generic clock consumer
+properties.
+
+Example:
+
+i2c@3e016000 {
+	compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
+	reg = <0x3e016000 0x80>;
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&bsc1_clk>;
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};

Documentation/devicetree/bindings/i2c/i2c-exynos5.txt

@@ -0,0 +1,44 @@
+* Samsung's High Speed I2C controller
+
+The Samsung's High Speed I2C controller is used to interface with I2C devices
+at various speeds ranging from 100khz to 3.4Mhz.
+
+Required properties:
+  - compatible: value should be.
+      -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - #address-cells: always 1 (for i2c addresses)
+  - #size-cells: always 0
+
+  - Pinctrl:
+    - pinctrl-0: Pin control group to be used for this controller.
+    - pinctrl-names: Should contain only one value - "default".
+
+Optional properties:
+  - clock-frequency: Desired operating frequency in Hz of the bus.
+    -> If not specified, the bus operates in fast-speed mode at
+       at 100khz.
+    -> If specified, the bus operates in high-speed mode only if the
+       clock-frequency is >= 1Mhz.
+
+Example:
+
+hsi2c@12ca0000 {
+	compatible = "samsung,exynos5-hsi2c";
+	reg = <0x12ca0000 0x100>;
+	interrupts = <56>;
+	clock-frequency = <100000>;
+
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+	};
+};

Documentation/devicetree/bindings/i2c/i2c-omap.txt

@@ -1,7 +1,8 @@
 I2C for OMAP platforms
 
 Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+  or "ti,omap4-i2c"
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -0,0 +1,23 @@
+I2C for R-Car platforms
+
+Required properties:
+- compatible: Must be one of
+	"renesas,i2c-rcar"
+	"renesas,i2c-r8a7778"
+	"renesas,i2c-r8a7779"
+	"renesas,i2c-r8a7790"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: interrupt specifier.
+
+Optional properties:
+- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
+  propoerty indicates the default frequency 100 kHz.
+
+Examples :
+
+i2c0: i2c@e6500000 {
+	compatible = "renesas,i2c-rcar-h2";
+	reg = <0 0xe6500000 0 0x428>;
+	interrupts = <0 174 0x4>;
+};

Documentation/devicetree/bindings/i2c/i2c-st.txt

@@ -0,0 +1,41 @@
+ST SSC binding, for I2C mode operation
+
+Required properties :
+- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- clock-names: Must contain "ssc".
+- clocks: Must contain an entry for each name in clock-names. See the common
+  clock bindings.
+- A pinctrl state named "default" must be defined to set pins in mode of
+  operation for I2C transfer.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+  the default 100 kHz frequency will be used. As only Normal and Fast modes
+  are supported, possible values are 100000 and 400000.
+- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
+  allowed through the deglitch circuit. In units of us.
+- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
+  allowed through the deglitch circuit. In units of us.
+- A pinctrl state named "idle" could be defined to set pins in idle state
+  when I2C instance is not performing a transfer.
+- A pinctrl state named "sleep" could be defined to set pins in sleep state
+  when driver enters in suspend.
+
+
+
+Example :
+
+i2c0: i2c@fed40000 {
+	compatible	= "st,comms-ssc4-i2c";
+	reg		= <0xfed40000 0x110>;
+	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+	clocks		= <&CLK_S_ICN_REG_0>;
+	clock-names	= "ssc";
+	clock-frequency = <400000>;
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_i2c0_default>;
+	st,i2c-min-scl-pulse-width-us = <0>;
+	st,i2c-min-sda-pulse-width-us = <5>;
+};

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -15,6 +15,7 @@ adi,adt7461		+/-1C TDM Extended Temp Range I.C
 adt7461			+/-1C TDM Extended Temp Range I.C
 at,24c08		i2c serial eeprom  (24cxx)
 atmel,24c02		i2c serial eeprom  (24cxx)
+atmel,at97sc3204t	i2c trusted platform module (TPM)
 catalyst,24c32		i2c serial eeprom
 dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
 dallas,ds1338		I2C RTC with 56-Byte NV RAM
@@ -35,6 +36,7 @@ fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
 fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
+gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
@@ -44,6 +46,7 @@ mc,rv3029c2		Real Time Clock Module with I2C-Bus
 national,lm75		I2C TEMP SENSOR
 national,lm80		Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
 national,lm92		±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface
+nuvoton,npct501		i2c trusted platform module (TPM)
 nxp,pca9556		Octal SMBus and I2C registered interface
 nxp,pca9557		8-bit I2C-bus and SMBus I/O port with reset
 nxp,pcf8563		Real-time clock/calendar
@@ -61,3 +64,4 @@ taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
 ti,tmp275		Digital Temperature Sensor
+winbond,wpct301		i2c trusted platform module (TPM)

Documentation/devicetree/bindings/media/st-rc.txt

@@ -0,0 +1,29 @@
+Device-Tree bindings for ST IRB IP
+
+Required properties:
+	- compatible: Should contain "st,comms-irb".
+	- reg: Base physical address of the controller and length of memory
+	  mapped region.
+	- interrupts: interrupt-specifier for the sole interrupt generated by
+	  the device. The interrupt specifier format depends on the interrupt
+	  controller parent.
+	- rx-mode: can be "infrared" or "uhf". This property specifies the L1
+	  protocol used for receiving remote control signals. rx-mode should
+	  be present iff the rx pins are wired up.
+	- tx-mode: should be "infrared". This property specifies the L1
+	  protocol used for transmitting remote control signals. tx-mode should
+	  be present iff the tx pins are wired up.
+
+Optional properties:
+	- pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
+	  properly for IRB pins.
+	- clocks : phandle with clock-specifier pair for IRB.
+
+Example node:
+
+	rc: rc@fe518000 {
+		compatible	= "st,comms-irb";
+		reg		= <0xfe518000 0x234>;
+		interrupts	= <0 203 0>;
+		rx-mode		= "infrared";
+	};

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -12,6 +12,11 @@ Required properties:
 Optional properties:
 - fsl,cd-controller : Indicate to use controller internal card detection
 - fsl,wp-controller : Indicate to use controller internal write protection
+- fsl,delay-line : Specify the number of delay cells for override mode.
+  This is used to set the clock delay for DLL(Delay Line) on override mode
+  to select a proper data sampling window in case the clock quality is not good
+  due to signal path is too long on the board. Please refer to eSDHC/uSDHC
+  chapter, DLL (Delay Line) section in RM for details.
 
 Examples:
 

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -52,6 +52,9 @@ Optional properties:
   is specified and the ciu clock is specified then we'll try to set the ciu
   clock to this at probe time.
 
+* clock-freq-min-max: Minimum and Maximum clock frequency for card output
+  clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
+
 * num-slots: specifies the number of slots supported by the controller.
   The number of physical slots actually used could be equal or less than the
   value specified by num-slots. If this property is not specified, the value
@@ -66,6 +69,10 @@ Optional properties:
 
 * supports-highspeed: Enables support for high speed cards (up to 50MHz)
 
+* caps2-mmc-hs200-1_8v: Supports mmc HS200 SDR 1.8V mode
+
+* caps2-mmc-hs200-1_2v: Supports mmc HS200 SDR 1.2V mode
+
 * broken-cd: as documented in mmc core bindings.
 
 * vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
@@ -93,8 +100,10 @@ board specific portions as listed below.
 
 	dwmmc0@12200000 {
 		clock-frequency = <400000000>;
+		clock-freq-min-max = <400000 200000000>;
 		num-slots = <1>;
 		supports-highspeed;
+		caps2-mmc-hs200-1_8v;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;

Documentation/devicetree/bindings/mmc/ti-omap.txt

@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -15,6 +15,7 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
 
 Example:
 
@@ -25,4 +26,5 @@ ethernet@83fec000 {
 	phy-mode = "mii";
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
+	phy-supply = <&reg_fec_supply>;
 };

Documentation/devicetree/bindings/power/twl-charger.txt

@@ -0,0 +1,20 @@
+TWL BCI (Battery Charger Interface)
+
+Required properties:
+- compatible:
+  - "ti,twl4030-bci"
+- interrupts: two interrupt lines from the TWL SIH (secondary
+  interrupt handler) - interrupts 9 and 2.
+
+Optional properties:
+- ti,bb-uvolt: microvolts for charging the backup battery.
+- ti,bb-uamp: microamps for charging the backup battery.
+
+Examples:
+
+bci {
+   compatible = "ti,twl4030-bci";
+   interrupts = <9>, <2>;
+   ti,bb-uvolt = <3200000>;
+   ti,bb-uamp = <150>;
+};

Documentation/devicetree/bindings/power_supply/ti,bq24735.txt

@@ -0,0 +1,32 @@
+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - interrupts : Specify the interrupt to be used to trigger when the AC
+   adapter is either plugged in or removed.
+ - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
+   presence. This is a Host GPIO that is configured as an input and
+   connected to the bq24735.
+ - ti,charge-current : Used to control and set the charging current. This value
+   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
+   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
+   about the ChargeCurrent (0x14h) register.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
+   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
+   about the ChargeVoltage (0x15h) register.
+ - ti,input-current : Used to control and set the charger input current. This
+   value must be between 128mA and 8.064A with a 128mA step resolution. The
+   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
+   more information about the InputCurrent (0x3fh) register.
+
+Example:
+
+	bq24735@9 {
+		compatible = "ti,bq24735";
+		reg = <0x9>;
+		ti,ac-detect-gpios = <&gpio 72 0x1>;
+	}

Documentation/devicetree/bindings/powerpc/fsl/dma.txt

@@ -1,33 +1,30 @@
-* Freescale 83xx DMA Controller
+* Freescale DMA Controllers
 
-Freescale PowerPC 83xx have on chip general purpose DMA controllers.
+** Freescale Elo DMA Controller
+   This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+   series chips such as mpc8315, mpc8349, mpc8379 etc.
 
 Required properties:
 
-- compatible        : compatible list, contains 2 entries, first is
-		 "fsl,CHIP-dma", where CHIP is the processor
-		 (mpc8349, mpc8360, etc.) and the second is
-		 "fsl,elo-dma"
-- reg               : <registers mapping for DMA general status reg>
-- ranges		: Should be defined as specified in 1) to describe the
-		  DMA controller channels.
+- compatible        : must include "fsl,elo-dma"
+- reg               : DMA General Status Register, i.e. DGSR which contains
+                      status for all the 4 DMA channels
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
 - cell-index        : controller index.  0 for controller @ 0x8100
-- interrupts        : <interrupt mapping for DMA IRQ>
+- interrupts        : interrupt specifier for DMA IRQ
 - interrupt-parent  : optional, if needed for interrupt mapping
 
-
 - DMA channel nodes:
-        - compatible        : compatible list, contains 2 entries, first is
-			 "fsl,CHIP-dma-channel", where CHIP is the processor
-			 (mpc8349, mpc8350, etc.) and the second is
-			 "fsl,elo-dma-channel". However, see note below.
-        - reg               : <registers mapping for channel>
-        - cell-index        : dma channel index starts at 0.
+        - compatible        : must include "fsl,elo-dma-channel"
+                              However, see note below.
+        - reg               : DMA channel specific registers
+        - cell-index        : DMA channel index starts at 0.
 
 Optional properties:
-        - interrupts        : <interrupt mapping for DMA channel IRQ>
-			  (on 83xx this is expected to be identical to
-			   the interrupts property of the parent node)
+        - interrupts        : interrupt specifier for DMA channel IRQ
+                              (on 83xx this is expected to be identical to
+                              the interrupts property of the parent node)
         - interrupt-parent  : optional, if needed for interrupt mapping
 
 Example:
@@ -70,30 +67,27 @@ Example:
 		};
 	};
 
-* Freescale 85xx/86xx DMA Controller
-
-Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers.
+** Freescale EloPlus DMA Controller
+   This is a 4-channel DMA controller with extended addresses and chaining,
+   mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+   mpc8540, mpc8641 p4080, bsc9131 etc.
 
 Required properties:
 
-- compatible        : compatible list, contains 2 entries, first is
-		 "fsl,CHIP-dma", where CHIP is the processor
-		 (mpc8540, mpc8540, etc.) and the second is
-		 "fsl,eloplus-dma"
-- reg               : <registers mapping for DMA general status reg>
+- compatible        : must include "fsl,eloplus-dma"
+- reg               : DMA General Status Register, i.e. DGSR which contains
+                      status for all the 4 DMA channels
 - cell-index        : controller index.  0 for controller @ 0x21000,
                                          1 for controller @ 0xc000
-- ranges		: Should be defined as specified in 1) to describe the
-		  DMA controller channels.
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
 
 - DMA channel nodes:
-        - compatible        : compatible list, contains 2 entries, first is
-			 "fsl,CHIP-dma-channel", where CHIP is the processor
-			 (mpc8540, mpc8560, etc.) and the second is
-			 "fsl,eloplus-dma-channel". However, see note below.
-        - cell-index        : dma channel index starts at 0.
-        - reg               : <registers mapping for channel>
-        - interrupts        : <interrupt mapping for DMA channel IRQ>
+        - compatible        : must include "fsl,eloplus-dma-channel"
+                              However, see note below.
+        - cell-index        : DMA channel index starts at 0.
+        - reg               : DMA channel specific registers
+        - interrupts        : interrupt specifier for DMA channel IRQ
         - interrupt-parent  : optional, if needed for interrupt mapping
 
 Example:
@@ -134,6 +128,76 @@ Example:
 		};
 	};
 
+** Freescale Elo3 DMA Controller
+   DMA controller which has same function as EloPlus except that Elo3 has 8
+   channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+   series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible        : must include "fsl,elo3-dma"
+- reg               : contains two entries for DMA General Status Registers,
+                      i.e. DGSR0 which includes status for channel 1~4, and
+                      DGSR1 for channel 5~8
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,eloplus-dma-channel"
+        - reg               : DMA channel specific registers
+        - interrupts        : interrupt specifier for DMA channel IRQ
+        - interrupt-parent  : optional, if needed for interrupt mapping
+
+Example:
+dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x100300 0x4>,
+	      <0x100600 0x4>;
+	ranges = <0x0 0x100100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <31 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <79 2 0 0>;
+	};
+};
+
 Note on DMA channel compatible properties: The compatible property must say
 "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
 driver (fsldma).  Any DMA channel used by fsldma cannot be used by another

Documentation/devicetree/bindings/pwm/pwm-samsung.txt

@@ -15,7 +15,7 @@ Required properties:
     samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,
 			  Exynos4210 rev0 SoCs
     samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,
-                          Exynos4x12 and Exynos5250 SoCs
+                          Exynos4x12, Exynos5250 and Exynos5420 SoCs
 - reg: base address and size of register area
 - interrupts: list of timer interrupts (one interrupt per timer, starting at
   timer 0)

Documentation/devicetree/bindings/rng/qcom,prng.txt

@@ -0,0 +1,17 @@
+Qualcomm MSM pseudo random number generator.
+
+Required properties:
+
+- compatible  : should be "qcom,prng"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
+
+Example:
+
+	rng@f9bff000 {
+		compatible = "qcom,prng";
+		reg = <0xf9bff000 0x200>;
+		clocks = <&clock GCC_PRNG_AHB_CLK>;
+		clock-names = "core";
+	};

Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt

@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.

Documentation/devicetree/bindings/spi/omap-spi.txt

@@ -2,8 +2,8 @@ OMAP2+ McSPI device
 
 Required properties:
 - compatible :
-  - "ti,omap2-spi" for OMAP2 & OMAP3.
-  - "ti,omap4-spi" for OMAP4+.
+  - "ti,omap2-mcspi" for OMAP2 & OMAP3.
+  - "ti,omap4-mcspi" for OMAP4+.
 - ti,spi-num-cs : Number of chipselect supported  by the instance.
 - ti,hwmods: Name of the hwmod associated to the McSPI
 - ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -32,12 +32,14 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt	Global Mixed-mode Technology, Inc.
 hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.

Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt

@@ -10,12 +10,16 @@ Required properties:
       last value in the array represents a 100% duty cycle (brightest).
   - default-brightness-level: the default brightness level (index into the
       array defined by the "brightness-levels" property)
+  - power-supply: regulator for supply voltage
 
 Optional properties:
   - pwm-names: a list of names for the PWM devices specified in the
                "pwms" property (see PWM binding[0])
+  - enable-gpios: contains a single GPIO specifier for the GPIO which enables
+                  and disables the backlight (see GPIO binding[1])
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
 
 Example:
 
@@ -25,4 +29,7 @@ Example:
 
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+		power-supply = <&vdd_bl_reg>;
+		enable-gpios = <&gpio 58 0>;
 	};

Documentation/devicetree/bindings/watchdog/dw_wdt.txt

@@ -0,0 +1,21 @@
+Synopsys Designware Watchdog Timer
+
+Required Properties:
+
+- compatible	: Should contain "snps,dw-wdt"
+- reg		: Base address and size of the watchdog timer registers.
+- clocks	: phandle + clock-specifier for the clock that drives the
+		watchdog timer.
+
+Optional Properties:
+
+- interrupts	: The interrupt used for the watchdog timeout warning.
+
+Example:
+
+	watchdog0: wd@ffd02000 {
+		compatible = "snps,dw-wdt";
+		reg = <0xffd02000 0x1000>;
+		interrupts = <0 171 4>;
+		clocks = <&per_base_clk>;
+	};

Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt

@@ -0,0 +1,15 @@
+MOXA ART Watchdog timer
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-watchdog"
+- reg : Should contain registers location and length
+- clocks : Should contain phandle for the clock that drives the counter
+
+Example:
+
+	watchdog: watchdog@98500000 {
+		compatible = "moxa,moxart-watchdog";
+		reg = <0x98500000 0x10>;
+		clocks = <&coreclk>;
+	};

Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt

@@ -0,0 +1,19 @@
+Ralink Watchdog Timers
+
+Required properties:
+- compatible: must be "ralink,rt2880-wdt"
+- reg: physical base address of the controller and length of the register range
+
+Optional properties:
+- interrupt-parent: phandle to the INTC device node
+- interrupts: Specify the INTC interrupt number
+
+Example:
+
+	watchdog@120 {
+		compatible = "ralink,rt2880-wdt";
+		reg = <0x120 0x10>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <1>;
+	};

Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt

@@ -0,0 +1,14 @@
+SiRFSoC Timer and Watchdog Timer(WDT) Controller
+
+Required properties:
+- compatible: "sirf,prima2-tick"
+- reg: Address range of tick timer/WDT register set
+- interrupts: interrupt number to the cpu
+
+Example:
+
+timer@b0020000 {
+	compatible = "sirf,prima2-tick";
+	reg = <0xb0020000 0x1000>;
+	interrupts = <0>;
+};

Documentation/dmatest.txt

@@ -15,39 +15,48 @@ be built as module or inside kernel. Let's consider those cases.
 
 	Part 2 - When dmatest is built as a module...
 
-After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest
-folder with nodes will be created. There are two important files located. First
-is the 'run' node that controls run and stop phases of the test, and the second
-one, 'results', is used to get the test case results.
-
-Note that in this case test will not run on load automatically.
-
 Example of usage:
+	% modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
+
+...or:
+	% modprobe dmatest
 	% echo dma0chan0 > /sys/module/dmatest/parameters/channel
 	% echo 2000 > /sys/module/dmatest/parameters/timeout
 	% echo 1 > /sys/module/dmatest/parameters/iterations
-	% echo 1 > /sys/kernel/debug/dmatest/run
+	% echo 1 > /sys/module/dmatest/parameters/run
+
+...or on the kernel command line:
+
+	dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
 
 Hint: available channel list could be extracted by running the following
 command:
 	% ls -1 /sys/class/dma/
 
-After a while you will start to get messages about current status or error like
-in the original code.
+Once started a message like "dmatest: Started 1 threads using dma0chan0" is
+emitted.  After that only test failure messages are reported until the test
+stops.
 
 Note that running a new test will not stop any in progress test.
 
-The following command should return actual state of the test.
-	% cat /sys/kernel/debug/dmatest/run
-
-To wait for test done the user may perform a busy loop that checks the state.
-
-	% while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ]
-	> do
-	> 	echo -n "."
-	> 	sleep 1
-	> done
-	> echo
+The following command returns the state of the test.
+	% cat /sys/module/dmatest/parameters/run
+
+To wait for test completion userpace can poll 'run' until it is false, or use
+the wait parameter.  Specifying 'wait=1' when loading the module causes module
+initialization to pause until a test run has completed, while reading
+/sys/module/dmatest/parameters/wait waits for any running test to complete
+before returning.  For example, the following scripts wait for 42 tests
+to complete before exiting.  Note that if 'iterations' is set to 'infinite' then
+waiting is disabled.
+
+Example:
+	% modprobe dmatest run=1 iterations=42 wait=1
+	% modprobe -r dmatest
+...or:
+	% modprobe dmatest run=1 iterations=42
+	% cat /sys/module/dmatest/parameters/wait
+	% modprobe -r dmatest
 
 	Part 3 - When built-in in the kernel...
 
@@ -62,21 +71,22 @@ case. You always could check them at run-time by running
 
 	Part 4 - Gathering the test results
 
-The module provides a storage for the test results in the memory. The gathered
-data could be used after test is done.
+Test results are printed to the kernel log buffer with the format:
 
-The special file 'results' in the debugfs represents gathered data of the in
-progress test. The messages collected are printed to the kernel log as well.
+"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
 
 Example of output:
-	% cat /sys/kernel/debug/dmatest/results
-	dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
+	% dmesg | tail -n 1
+	dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
 
 The message format is unified across the different types of errors. A number in
 the parens represents additional information, e.g. error code, error counter,
-or status.
+or status.  A test thread also emits a summary line at completion listing the
+number of tests executed, number that failed, and a result code.
 
-Comparison between buffers is stored to the dedicated structure.
+Example:
+	% dmesg | tail -n 1
+	dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
 
-Note that the verify result is now accessible only via file 'results' in the
-debugfs.
+The details of a data miscompare error are also emitted, but do not follow the
+above format.

Documentation/filesystems/btrfs.txt

@@ -70,6 +70,12 @@ Unless otherwise specified, all options default to off.
 
 	See comments at the top of fs/btrfs/check-integrity.c for more info.
 
+  commit=<seconds>
+	Set the interval of periodic commit, 30 seconds by default. Higher
+	values defer data being synced to permanent storage with obvious
+	consequences when the system crashes. The upper bound is not forced,
+	but a warning is printed if it's more than 300 seconds (5 minutes).
+
   compress
   compress=<type>
   compress-force
@@ -154,7 +160,11 @@ Unless otherwise specified, all options default to off.
 	Currently this scans a list of several previous tree roots and tries to 
 	use the first readable.
 
- skip_balance
+  rescan_uuid_tree
+	Force check and rebuild procedure of the UUID tree. This should not
+	normally be needed.
+
+  skip_balance
 	Skip automatic resume of interrupted balance operation after mount.
 	May be resumed with "btrfs balance resume."
 
@@ -234,24 +244,14 @@ available from the git repository at the following location:
 
 These include the following tools:
 
-mkfs.btrfs: create a filesystem
-
-btrfsctl: control program to create snapshots and subvolumes:
+* mkfs.btrfs: create a filesystem
 
-	mount /dev/sda2 /mnt
-	btrfsctl -s new_subvol_name /mnt
-	btrfsctl -s snapshot_of_default /mnt/default
-	btrfsctl -s snapshot_of_new_subvol /mnt/new_subvol_name
-	btrfsctl -s snapshot_of_a_snapshot /mnt/snapshot_of_new_subvol
-	ls /mnt
-	default snapshot_of_a_snapshot snapshot_of_new_subvol
-	new_subvol_name snapshot_of_default
+* btrfs: a single tool to manage the filesystems, refer to the manpage for more details
 
-	Snapshots and subvolumes cannot be deleted right now, but you can
-	rm -rf all the files and directories inside them.
+* 'btrfsck' or 'btrfs check': do a consistency check of the filesystem
 
-btrfsck: do a limited check of the FS extent trees.
+Other tools for specific tasks:
 
-btrfs-debug-tree: print all of the FS metadata in text form.  Example:
+* btrfs-convert: in-place conversion from ext2/3/4 filesystems
 
-	btrfs-debug-tree /dev/sda2 >& big_output_file
+* btrfs-image: dump filesystem metadata for debugging

Documentation/gpio/00-INDEX

@@ -0,0 +1,14 @@
+00-INDEX
+	- This file
+gpio.txt
+	- Introduction to GPIOs and their kernel interfaces
+consumer.txt
+	- How to obtain and use GPIOs in a driver
+driver.txt
+	- How to write a GPIO driver
+board.txt
+	- How to assign GPIOs to a consumer device and a function
+sysfs.txt
+	- Information about the GPIO sysfs interface
+gpio-legacy.txt
+	- Historical documentation of the deprecated GPIO integer interface

Documentation/gpio/board.txt

@@ -0,0 +1,115 @@
+GPIO Mappings
+=============
+
+This document explains how GPIOs can be assigned to given devices and functions.
+Note that it only applies to the new descriptor-based interface. For a
+description of the deprecated integer-based GPIO interface please refer to
+gpio-legacy.txt (actually, there is no real mapping possible with the old
+interface; you just fetch an integer from somewhere and request the
+corresponding GPIO.
+
+Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
+is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
+their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+describe its hardware layout. Currently, mappings can be defined through device
+tree, ACPI, and platform data.
+
+Device Tree
+-----------
+GPIOs can easily be mapped to devices and functions in the device tree. The
+exact way to do it depends on the GPIO controller providing the GPIOs, see the
+device tree bindings for your controller.
+
+GPIOs mappings are defined in the consumer device's node, in a property named
+<function>-gpios, where <function> is the function the driver will request
+through gpiod_get(). For example:
+
+	foo_device {
+		compatible = "acme,foo";
+		...
+		led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
+			    <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
+			    <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
+
+		power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+This property will make GPIOs 15, 16 and 17 available to the driver under the
+"led" function, and GPIO 1 as the "power" GPIO:
+
+	struct gpio_desc *red, *green, *blue, *power;
+
+	red = gpiod_get_index(dev, "led", 0);
+	green = gpiod_get_index(dev, "led", 1);
+	blue = gpiod_get_index(dev, "led", 2);
+
+	power = gpiod_get(dev, "power");
+
+The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
+gpiod_is_active_low(power) will be true).
+
+ACPI
+----
+ACPI does not support function names for GPIOs. Therefore, only the "idx"
+argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
+to a device. The "con_id" argument can still be set for debugging purposes (it
+will appear under error messages as well as debug and sysfs nodes).
+
+Platform Data
+-------------
+Finally, GPIOs can be bound to devices and functions using platform data. Board
+files that desire to do so need to include the following header:
+
+	#include <linux/gpio/driver.h>
+
+GPIOs are mapped by the means of tables of lookups, containing instances of the
+gpiod_lookup structure. Two macros are defined to help declaring such mappings:
+
+	GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
+	GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
+
+where
+
+  - chip_label is the label of the gpiod_chip instance providing the GPIO
+  - chip_hwnum is the hardware number of the GPIO within the chip
+  - dev_id is the identifier of the device that will make use of this GPIO. If
+	NULL, the GPIO will be available to all devices.
+  - con_id is the name of the GPIO function from the device point of view. It
+	can be NULL.
+  - idx is the index of the GPIO within the function.
+  - flags is defined to specify the following properties:
+	* GPIOF_ACTIVE_LOW	- to configure the GPIO as active-low
+	* GPIOF_OPEN_DRAIN	- GPIO pin is open drain type.
+	* GPIOF_OPEN_SOURCE	- GPIO pin is open source type.
+
+In the future, these flags might be extended to support more properties.
+
+Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
+
+A lookup table can then be defined as follows:
+
+	struct gpiod_lookup gpios_table[] = {
+	GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
+	};
+
+And the table can be added by the board code as follows:
+
+	gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+
+The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
+
+	struct gpio_desc *red, *green, *blue, *power;
+
+	red = gpiod_get_index(dev, "led", 0);
+	green = gpiod_get_index(dev, "led", 1);
+	blue = gpiod_get_index(dev, "led", 2);
+
+	power = gpiod_get(dev, "power");
+	gpiod_direction_output(power, 1);
+
+Since the "power" GPIO is mapped as active-low, its actual signal will be 0
+after this code. Contrary to the legacy integer GPIO interface, the active-low
+property is handled during mapping and is thus transparent to GPIO consumers.

Documentation/gpio/consumer.txt

@@ -0,0 +1,197 @@
+GPIO Descriptor Consumer Interface
+==================================
+
+This document describes the consumer interface of the GPIO framework. Note that
+it describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+
+Guidelines for GPIOs consumers
+==============================
+
+Drivers that can't work without standard GPIO calls should have Kconfig entries
+that depend on GPIOLIB. The functions that allow a driver to obtain and use
+GPIOs are available by including the following file:
+
+	#include <linux/gpio/consumer.h>
+
+All the functions that work with the descriptor-based GPIO interface are
+prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
+other function in the kernel should use these prefixes.
+
+
+Obtaining and Disposing GPIOs
+=============================
+
+With the descriptor-based interface, GPIOs are identified with an opaque,
+non-forgeable handler that must be obtained through a call to one of the
+gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
+device that will use the GPIO and the function the requested GPIO is supposed to
+fulfill:
+
+	struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
+
+If a function is implemented by using several GPIOs together (e.g. a simple LED
+device that displays digits), an additional index argument can be specified:
+
+	struct gpio_desc *gpiod_get_index(struct device *dev,
+					  const char *con_id, unsigned int idx)
+
+Both functions return either a valid GPIO descriptor, or an error code checkable
+with IS_ERR(). They will never return a NULL pointer.
+
+Device-managed variants of these functions are also defined:
+
+	struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
+
+	struct gpio_desc *devm_gpiod_get_index(struct device *dev,
+					       const char *con_id,
+					       unsigned int idx)
+
+A GPIO descriptor can be disposed of using the gpiod_put() function:
+
+	void gpiod_put(struct gpio_desc *desc)
+
+It is strictly forbidden to use a descriptor after calling this function. The
+device-managed variant is, unsurprisingly:
+
+	void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+
+
+Using GPIOs
+===========
+
+Setting Direction
+-----------------
+The first thing a driver must do with a GPIO is setting its direction. This is
+done by invoking one of the gpiod_direction_*() functions:
+
+	int gpiod_direction_input(struct gpio_desc *desc)
+	int gpiod_direction_output(struct gpio_desc *desc, int value)
+
+The return value is zero for success, else a negative errno. It should be
+checked, since the get/set calls don't return errors and since misconfiguration
+is possible. You should normally issue these calls from a task context. However,
+for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
+of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value. This
+helps avoid signal glitching during system startup.
+
+A driver can also query the current direction of a GPIO:
+
+	int gpiod_get_direction(const struct gpio_desc *desc)
+
+This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
+
+Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
+without setting its direction first is illegal and will result in undefined
+behavior!**
+
+
+Spinlock-Safe GPIO Access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions. Those
+don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
+handlers and similar contexts.
+
+Use the following calls to access GPIOs from an atomic context:
+
+	int gpiod_get_value(const struct gpio_desc *desc);
+	void gpiod_set_value(struct gpio_desc *desc, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the value
+of an output pin, the value returned should be what's seen on the pin. That
+won't always match the specified output value, because of issues including
+open-drain signaling and output latencies.
+
+The get/set calls do not return errors because "invalid GPIO" should have been
+reported earlier from gpiod_direction_*(). However, note that not all platforms
+can read the value of output pins; those that can't should always return zero.
+Also, using these calls for GPIOs that can't safely be accessed without sleeping
+(see below) is an error.
+
+
+GPIO Access That May Sleep
+--------------------------
+Some GPIO controllers must be accessed using message based buses like I2C or
+SPI. Commands to read or write those GPIO values require waiting to get to the
+head of a queue to transmit a command and get its response. This requires
+sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs by
+returning nonzero from this call:
+
+	int gpiod_cansleep(const struct gpio_desc *desc)
+
+To access such GPIOs, a different set of accessors is defined:
+
+	int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+	void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+
+Accessing such GPIOs requires a context which may sleep, for example a threaded
+IRQ handler, and those accessors must be used instead of spinlock-safe
+accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work on GPIOs
+that can't be accessed from hardIRQ handlers, these calls act the same as the
+spinlock-safe calls.
+
+
+Active-low State and Raw GPIO Values
+------------------------------------
+Device drivers like to manage the logical state of a GPIO, i.e. the value their
+device will actually receive, no matter what lies between it and the GPIO line.
+In some cases, it might make sense to control the actual GPIO line value. The
+following set of calls ignore the active-low property of a GPIO and work on the
+raw line value:
+
+	int gpiod_get_raw_value(const struct gpio_desc *desc)
+	void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+	int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+	void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+
+The active-low state of a GPIO can also be queried using the following call:
+
+	int gpiod_is_active_low(const struct gpio_desc *desc)
+
+Note that these functions should only be used with great moderation ; a driver
+should not have to care about the physical line level.
+
+GPIOs mapped to IRQs
+--------------------
+GPIO lines can quite often be used as IRQs. You can get the IRQ number
+corresponding to a given GPIO using the following call:
+
+	int gpiod_to_irq(const struct gpio_desc *desc)
+
+It will return an IRQ number, or an negative errno code if the mapping can't be
+done (most likely because that particular GPIO cannot be used as IRQ). It is an
+unchecked error to use a GPIO that wasn't set up as an input using
+gpiod_direction_input(), or to use an IRQ number that didn't originally come
+from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
+
+Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
+free_irq(). They will often be stored into IRQ resources for platform devices,
+by the board-specific initialization code. Note that IRQ trigger options are
+part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
+capabilities.
+
+
+Interacting With the Legacy GPIO Subsystem
+==========================================
+Many kernel subsystems still handle GPIOs using the legacy integer-based
+interface. Although it is strongly encouraged to upgrade them to the safer
+descriptor-based API, the following two functions allow you to convert a GPIO
+descriptor into the GPIO integer namespace and vice-versa:
+
+	int desc_to_gpio(const struct gpio_desc *desc)
+	struct gpio_desc *gpio_to_desc(unsigned gpio)
+
+The GPIO number returned by desc_to_gpio() can be safely used as long as the
+GPIO descriptor has not been freed. All the same, a GPIO number passed to
+gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
+descriptor is only possible after the GPIO number has been released.
+
+Freeing a GPIO obtained by one API with the other API is forbidden and an
+unchecked error.

Documentation/gpio/driver.txt

@@ -0,0 +1,75 @@
+GPIO Descriptor Driver Interface
+================================
+
+This document serves as a guide for GPIO chip drivers writers. Note that it
+describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+Each GPIO controller driver needs to include the following header, which defines
+the structures used to define a GPIO driver:
+
+	#include <linux/gpio/driver.h>
+
+
+Internal Representation of GPIOs
+================================
+
+Inside a GPIO driver, individual GPIOs are identified by their hardware number,
+which is a unique number between 0 and n, n being the number of GPIOs managed by
+the chip. This number is purely internal: the hardware number of a particular
+GPIO descriptor is never made visible outside of the driver.
+
+On top of this internal number, each GPIO also need to have a global number in
+the integer GPIO namespace so that it can be used with the legacy GPIO
+interface. Each chip must thus have a "base" number (which can be automatically
+assigned), and for each GPIO the global number will be (base + hardware number).
+Although the integer representation is considered deprecated, it still has many
+users and thus needs to be maintained.
+
+So for example one platform could use numbers 32-159 for GPIOs, with a
+controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
+numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
+controller, and on one particular board 80-95 with an FPGA. The numbers need not
+be contiguous; either of those platforms could also use numbers 2000-2063 to
+identify GPIOs in a bank of I2C GPIO expanders.
+
+
+Controller Drivers: gpio_chip
+=============================
+
+In the gpiolib framework each GPIO controller is packaged as a "struct
+gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
+common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - method to return the IRQ number associated to a given GPIO
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - optional base number (will be automatically assigned if omitted)
+ - label for diagnostics and GPIOs mapping using platform data
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
+use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state not
+exposed by the GPIO interfaces, such as addressing, power management, and more.
+Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns either
+NULL or the label associated with that GPIO when it was requested.
+
+Locking IRQ usage
+-----------------
+Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
+to mark the GPIO as being used as an IRQ:
+
+	int gpiod_lock_as_irq(struct gpio_desc *desc)
+
+This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
+is released:
+
+	void gpiod_unlock_as_irq(struct gpio_desc *desc)

Documentation/gpio/gpio.txt

@@ -0,0 +1,119 @@
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+Due to the history of GPIO interfaces in the kernel, there are two different
+ways to obtain and use GPIOs:
+
+  - The descriptor-based interface is the preferred way to manipulate GPIOs,
+and is described by all the files in this directory excepted gpio-legacy.txt.
+  - The legacy integer-based interface which is considered deprecated (but still
+usable for compatibility reasons) is documented in gpio-legacy.txt.
+
+The remainder of this document applies to the new descriptor-based interface.
+gpio-legacy.txt contains the same information applied to the legacy
+integer-based interface.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+  - Output values are writable (high=1, low=0). Some chips also have
+    options about how that value is driven, so that for example only one
+    value might be driven, supporting "wire-OR" and similar schemes for the
+    other value (notably, "open drain" signaling).
+
+  - Input values are likewise readable (1, 0). Some chips support readback
+    of pins configured as "output", which is very useful in such "wire-OR"
+    cases (to support bidirectional signaling). GPIO controllers may have
+    input de-glitch/debounce logic, sometimes with software controls.
+
+  - Inputs can often be used as IRQ signals, often edge triggered but
+    sometimes level triggered. Such IRQs may be configurable as system
+    wakeup events, to wake the system from a low power state.
+
+  - Usually a GPIO will be configurable as either input or output, as needed
+    by different product boards; single direction ones exist too.
+
+  - Most GPIOs can be accessed while holding spinlocks, but those accessed
+    through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ LOW:	gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
+	the pullup.
+
+ HIGH:	gpiod_direction_input(gpio) ... this turns off the output, so the pullup
+	(or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched:  a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.

Documentation/gpio/sysfs.txt

@@ -0,0 +1,155 @@
+GPIO Sysfs Interface for Userspace
+==================================
+
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks:  "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+   -	Control interfaces used to get userspace control over GPIOs;
+
+   -	GPIOs themselves; and
+
+   -	GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+    /sys/class/gpio/
+
+    	"export" ... Userspace may ask the kernel to export control of
+		a GPIO to userspace by writing its number to this file.
+
+		Example:  "echo 19 > export" will create a "gpio19" node
+		for GPIO #19, if that's not requested by kernel code.
+
+    	"unexport" ... Reverses the effect of exporting to userspace.
+
+		Example:  "echo 19 > unexport" will remove a "gpio19"
+		node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+    /sys/class/gpio/gpioN/
+
+	"direction" ... reads as either "in" or "out". This value may
+		normally be written. Writing as "out" defaults to
+		initializing the value as low. To ensure glitch free
+		operation, values "low" and "high" may be written to
+		configure the GPIO as an output with that initial value.
+
+		Note that this attribute *will not exist* if the kernel
+		doesn't support changing the direction of a GPIO, or
+		it was exported by kernel code that didn't explicitly
+		allow userspace to reconfigure this GPIO's direction.
+
+	"value" ... reads as either 0 (low) or 1 (high). If the GPIO
+		is configured as an output, this value may be written;
+		any nonzero value is treated as high.
+
+		If the pin can be configured as interrupt-generating interrupt
+		and if it has been configured to generate interrupts (see the
+		description of "edge"), you can poll(2) on that file and
+		poll(2) will return whenever the interrupt was triggered. If
+		you use poll(2), set the events POLLPRI and POLLERR. If you
+		use select(2), set the file descriptor in exceptfds. After
+		poll(2) returns, either lseek(2) to the beginning of the sysfs
+		file and read the new value or close the file and re-open it
+		to read the value.
+
+	"edge" ... reads as either "none", "rising", "falling", or
+		"both". Write these strings to select the signal edge(s)
+		that will make poll(2) on the "value" file return.
+
+		This file exists only if the pin can be configured as an
+		interrupt generating input pin.
+
+	"active_low" ... reads as either 0 (false) or 1 (true). Write
+		any nonzero value to invert the value attribute both
+		for reading and writing. Existing and subsequent
+		poll(2) support configuration via the edge attribute
+		for "rising" and "falling" edges will follow this
+		setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+    /sys/class/gpio/gpiochipN/
+
+    	"base" ... same as N, the first GPIO managed by this chip
+
+    	"label" ... provided for diagnostics (not always unique)
+
+    	"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+	/* export the GPIO to userspace */
+	int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+
+	/* reverse gpio_export() */
+	void gpiod_unexport(struct gpio_desc *desc);
+
+	/* create a sysfs link to an exported GPIO node */
+	int gpiod_export_link(struct device *dev, const char *name,
+		      struct gpio_desc *desc);
+
+	/* change the polarity of a GPIO node in sysfs */
+	int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpiod_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpiod_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. Polarity change can be done both
+before and after gpiod_export(), and previously enabled poll(2) support for
+either rising or falling edge will be reconfigured to follow this setting.

Documentation/i2c/busses/i2c-i801

@@ -25,6 +25,7 @@ Supported adapters:
   * Intel Avoton (SOC)
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
+  * Intel Wildcat Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/kernel-parameters.txt

@@ -1190,15 +1190,24 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			owned by uid=0.
 
 	ima_hash=	[IMA]
-			Format: { "sha1" | "md5" }
+			Format: { md5 | sha1 | rmd160 | sha256 | sha384
+				   | sha512 | ... }
 			default: "sha1"
 
+			The list of supported hash algorithms is defined
+			in crypto/hash_info.h.
+
 	ima_tcb		[IMA]
 			Load a policy which meets the needs of the Trusted
 			Computing Base.  This means IMA will measure all
 			programs exec'd, files mmap'd for exec, and all files
 			opened for read by uid=0.
 
+	ima_template=   [IMA]
+			Select one of defined IMA measurements template formats.
+			Formats: { "ima" | "ima-ng" }
+			Default: "ima-ng"
+
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init

Documentation/mic/mpssd/mpssd.c

@@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
 	int i;
 	void *dp = get_dp(mic, type);
 
-	for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+	for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
 		i += mic_total_desc_size(d)) {
 		d = dp + i;
 
@@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 		__func__, mic->name, vr0->va, vr0->info, vr_size,
 		vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 	mpsslog("magic 0x%x expected 0x%x\n",
-		vr0->info->magic, MIC_MAGIC + type);
-	assert(vr0->info->magic == MIC_MAGIC + type);
+		le32toh(vr0->info->magic), MIC_MAGIC + type);
+	assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
 	if (vr1) {
 		vr1->va = (struct mic_vring *)
 			&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 			__func__, mic->name, vr1->va, vr1->info, vr_size,
 			vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 		mpsslog("magic 0x%x expected 0x%x\n",
-			vr1->info->magic, MIC_MAGIC + type + 1);
-		assert(vr1->info->magic == MIC_MAGIC + type + 1);
+			le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
+		assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
 	}
 done:
 	return va;
@@ -520,7 +520,7 @@ static void *
 virtio_net(void *arg)
 {
 	static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
-	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
 	struct iovec vnet_iov[2][2] = {
 		{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
 		  { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@ mic_config(void *arg)
 	}
 
 	do {
+		ret = lseek(fd, 0, SEEK_SET);
+		if (ret < 0) {
+			mpsslog("%s: Failed to seek to file start '%s': %s\n",
+				mic->name, pathname, strerror(errno));
+			goto close_error1;
+		}
 		ret = read(fd, value, sizeof(value));
 		if (ret < 0) {
 			mpsslog("%s: Failed to read sysfs entry '%s': %s\n",

Documentation/networking/ip-sysctl.txt

@@ -577,9 +577,6 @@ tcp_limit_output_bytes - INTEGER
 	typical pfifo_fast qdiscs.
 	tcp_limit_output_bytes limits the number of bytes on qdisc
 	or device to reduce artificial RTT/cwnd and reduce bufferbloat.
-	Note: For GSO/TSO enabled flows, we try to have at least two
-	packets in flight. Reducing tcp_limit_output_bytes might also
-	reduce the size of individual GSO packet (64KB being the max)
 	Default: 131072
 
 tcp_challenge_ack_limit - INTEGER

Documentation/power/power_supply_class.txt

@@ -135,11 +135,11 @@ CAPACITY_LEVEL - capacity level. This corresponds to
 POWER_SUPPLY_CAPACITY_LEVEL_*.
 
 TEMP - temperature of the power supply.
-TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade.
-TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade.
+TEMP_ALERT_MIN - minimum battery temperature alert.
+TEMP_ALERT_MAX - maximum battery temperature alert.
 TEMP_AMBIENT - ambient temperature.
-TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade.
-TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade.
+TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert.
+TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert.
 
 TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
 while battery powers a load)

Documentation/power/runtime_pm.txt

@@ -547,13 +547,11 @@ helper functions described in Section 4.  In that case, pm_runtime_resume()
 should be used.  Of course, for this purpose the device's runtime PM has to be
 enabled earlier by calling pm_runtime_enable().
 
-If the device bus type's or driver's ->probe() callback runs
-pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
-they will fail returning -EAGAIN, because the device's usage counter is
-incremented by the driver core before executing ->probe().  Still, it may be
-desirable to suspend the device as soon as ->probe() has finished, so the driver
-core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
-the device at that time.
+It may be desirable to suspend the device once ->probe() has finished.
+Therefore the driver core uses the asyncronous pm_request_idle() to submit a
+request to execute the subsystem-level idle callback for the device at that
+time.  A driver that makes use of the runtime autosuspend feature, may want to
+update the last busy mark before returning from ->probe().
 
 Moreover, the driver core prevents runtime PM callbacks from racing with the bus
 notifier callback in __device_release_driver(), which is necessary, because the
@@ -656,7 +654,7 @@ out the following operations:
     __pm_runtime_disable() with 'false' as the second argument for every device
     right before executing the subsystem-level .suspend_late() callback for it.
 
-  * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
+  * During system resume it calls pm_runtime_enable() and pm_runtime_put()
     for every device right after executing the subsystem-level .resume_early()
     callback and right after executing the subsystem-level .resume() callback
     for it, respectively.

Documentation/pwm.txt

@@ -39,7 +39,7 @@ New users should use the pwm_get() function and pass to it the consumer
 device or a consumer name. pwm_put() is used to free the PWM device. Managed
 variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
 
-After being requested a PWM has to be configured using:
+After being requested, a PWM has to be configured using:
 
 int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
 
@@ -94,7 +94,7 @@ for new drivers to use the generic PWM framework.
 A new PWM controller/chip can be added using pwmchip_add() and removed
 again with pwmchip_remove(). pwmchip_add() takes a filled in struct
 pwm_chip as argument which provides a description of the PWM chip, the
-number of PWM devices provider by the chip and the chip-specific
+number of PWM devices provided by the chip and the chip-specific
 implementation of the supported PWM operations to the framework.
 
 Locking

Documentation/security/00-INDEX

@@ -22,3 +22,5 @@ keys.txt
 	- description of the kernel key retention service.
 tomoyo.txt
 	- documentation on the TOMOYO Linux Security Module.
+IMA-templates.txt
+	- documentation on the template management mechanism for IMA.

Documentation/security/IMA-templates.txt

@@ -0,0 +1,87 @@
+                       IMA Template Management Mechanism
+
+
+==== INTRODUCTION ====
+
+The original 'ima' template is fixed length, containing the filedata hash
+and pathname. The filedata hash is limited to 20 bytes (md5/sha1).
+The pathname is a null terminated string, limited to 255 characters.
+To overcome these limitations and to add additional file metadata, it is
+necessary to extend the current version of IMA by defining additional
+templates. For example, information that could be possibly reported are
+the inode UID/GID or the LSM labels either of the inode and of the process
+that is accessing it.
+
+However, the main problem to introduce this feature is that, each time
+a new template is defined, the functions that generate and display
+the measurements list would include the code for handling a new format
+and, thus, would significantly grow over the time.
+
+The proposed solution solves this problem by separating the template
+management from the remaining IMA code. The core of this solution is the
+definition of two new data structures: a template descriptor, to determine
+which information should be included in the measurement list; a template
+field, to generate and display data of a given type.
+
+Managing templates with these structures is very simple. To support
+a new data type, developers define the field identifier and implement
+two functions, init() and show(), respectively to generate and display
+measurement entries. Defining a new template descriptor requires
+specifying the template format, a string of field identifiers separated
+by the '|' character. While in the current implementation it is possible
+to define new template descriptors only by adding their definition in the
+template specific code (ima_template.c), in a future version it will be
+possible to register a new template on a running kernel by supplying to IMA
+the desired format string. In this version, IMA initializes at boot time
+all defined template descriptors by translating the format into an array
+of template fields structures taken from the set of the supported ones.
+
+After the initialization step, IMA will call ima_alloc_init_template()
+(new function defined within the patches for the new template management
+mechanism) to generate a new measurement entry by using the template
+descriptor chosen through the kernel configuration or through the newly
+introduced 'ima_template=' kernel command line parameter. It is during this
+phase that the advantages of the new architecture are clearly shown:
+the latter function will not contain specific code to handle a given template
+but, instead, it simply calls the init() method of the template fields
+associated to the chosen template descriptor and store the result (pointer
+to allocated data and data length) in the measurement entry structure.
+
+The same mechanism is employed to display measurements entries.
+The functions ima[_ascii]_measurements_show() retrieve, for each entry,
+the template descriptor used to produce that entry and call the show()
+method for each item of the array of template fields structures.
+
+
+
+==== SUPPORTED TEMPLATE FIELDS AND DESCRIPTORS ====
+
+In the following, there is the list of supported template fields
+('<identifier>': description), that can be used to define new template
+descriptors by adding their identifier to the format string
+(support for more data types will be added later):
+
+ - 'd': the digest of the event (i.e. the digest of a measured file),
+        calculated with the SHA1 or MD5 hash algorithm;
+ - 'n': the name of the event (i.e. the file name), with size up to 255 bytes;
+ - 'd-ng': the digest of the event, calculated with an arbitrary hash
+           algorithm (field format: [<hash algo>:]digest, where the digest
+           prefix is shown only if the hash algorithm is not SHA1 or MD5);
+ - 'n-ng': the name of the event, without size limitations.
+
+
+Below, there is the list of defined template descriptors:
+ - "ima": its format is 'd|n';
+ - "ima-ng" (default): its format is 'd-ng|n-ng'.
+
+
+
+==== USE ====
+
+To specify the template descriptor to be used to generate measurement entries,
+currently the following methods are supported:
+
+ - select a template descriptor among those supported in the kernel
+   configuration ('ima-ng' is the default choice);
+ - specify a template descriptor name from the kernel command line through
+   the 'ima_template=' parameter.

Documentation/security/keys.txt

@@ -865,15 +865,14 @@ encountered:
      calling processes has a searchable link to the key from one of its
      keyrings. There are three functions for dealing with these:
 
-	key_ref_t make_key_ref(const struct key *key,
-			       unsigned long possession);
+	key_ref_t make_key_ref(const struct key *key, bool possession);
 
 	struct key *key_ref_to_ptr(const key_ref_t key_ref);
 
-	unsigned long is_key_possessed(const key_ref_t key_ref);
+	bool is_key_possessed(const key_ref_t key_ref);
 
      The first function constructs a key reference from a key pointer and
-     possession information (which must be 0 or 1 and not any other value).
+     possession information (which must be true or false).
 
      The second function retrieves the key pointer from a reference and the
      third retrieves the possession flag.
@@ -961,14 +960,17 @@ payload contents" for more information.
     the argument will not be parsed.
 
 
-(*) Extra references can be made to a key by calling the following function:
+(*) Extra references can be made to a key by calling one of the following
+    functions:
 
+	struct key *__key_get(struct key *key);
 	struct key *key_get(struct key *key);
 
-    These need to be disposed of by calling key_put() when they've been
-    finished with. The key pointer passed in will be returned. If the pointer
-    is NULL or CONFIG_KEYS is not set then the key will not be dereferenced and
-    no increment will take place.
+    Keys so references will need to be disposed of by calling key_put() when
+    they've been finished with.  The key pointer passed in will be returned.
+
+    In the case of key_get(), if the pointer is NULL or CONFIG_KEYS is not set
+    then the key will not be dereferenced and no increment will take place.
 
 
 (*) A key's serial number can be obtained by calling:

Documentation/target/tcm_mod_builder.py

@@ -440,15 +440,15 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	/*\n"
 	buf += "	 * Setup default attribute lists for various fabric->tf_cit_tmpl\n"
 	buf += "	 */\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_base_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_attrib_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_param_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_np_base_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n"
-	buf += "	TF_CIT_TMPL(fabric)->tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_wwn_cit.ct_attrs = " + fabric_mod_name + "_wwn_attrs;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_base_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_attrib_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_param_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_np_base_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_nacl_base_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_nacl_attrib_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_nacl_auth_cit.ct_attrs = NULL;\n"
+	buf += "	fabric->tf_cit_tmpl.tfc_tpg_nacl_param_cit.ct_attrs = NULL;\n"
 	buf += "	/*\n"
 	buf += "	 * Register the fabric for use within TCM\n"
 	buf += "	 */\n"

Documentation/vm/split_page_table_lock

@@ -63,9 +63,9 @@ levels.
 PMD split lock enabling requires pgtable_pmd_page_ctor() call on PMD table
 allocation and pgtable_pmd_page_dtor() on freeing.
 
-Allocation usually happens in pmd_alloc_one(), freeing in pmd_free(), but
-make sure you cover all PMD table allocation / freeing paths: i.e X86_PAE
-preallocate few PMDs on pgd_alloc().
+Allocation usually happens in pmd_alloc_one(), freeing in pmd_free() and
+pmd_free_tlb(), but make sure you cover all PMD table allocation / freeing
+paths: i.e X86_PAE preallocate few PMDs on pgd_alloc().
 
 With everything in place you can set CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK.
 

MAINTAINERS

@@ -893,20 +893,15 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
 F:	arch/arm/mach-imx/
+F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
-ARM/FREESCALE IMX6
-M:	Shawn Guo <shawn.guo@linaro.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F:	arch/arm/mach-imx/*imx6*
-
 ARM/FREESCALE MXS ARM ARCHITECTURE
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1070,7 +1065,6 @@ S:	Maintained
 ARM/NOMADIK ARCHITECTURE
 M:	Alessandro Rubini <rubini@unipv.it>
 M:	Linus Walleij <linus.walleij@linaro.org>
-M:	STEricsson <STEricsson_nomadik_linux@list.st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-nomadik/
@@ -1426,7 +1420,7 @@ M:	Wolfram Sang <wsa@the-dreams.de>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/eeprom/at24.c
-F:	include/linux/i2c/at24.h
+F:	include/linux/platform_data/at24.h
 
 ATA OVER ETHERNET (AOE) DRIVER
 M:	"Ed L. Cashin" <ecashin@coraid.com>
@@ -1935,7 +1929,8 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@fusionio.com>
+M:	Chris Mason <clm@fb.com>
+M:	Josef Bacik <jbacik@fb.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -2138,11 +2133,17 @@ S:	Maintained
 F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
-M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+M:	Peter Chen <Peter.Chen@freescale.com>
+T:	git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
 
+CHROME HARDWARE PLATFORM SUPPORT
+M:	Olof Johansson <olof@lixom.net>
+S:	Maintained
+F:	drivers/platform/chrome/
+
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
 M:	Sujith Sankar <ssujith@cisco.com>
@@ -2469,7 +2470,7 @@ S:	Maintained
 F:	drivers/media/dvb-frontends/cxd2820r*
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-M:	Divy Le Ray <divy@chelsio.com>
+M:	Santosh Raspatur <santosh@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
@@ -3064,6 +3065,14 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
+EDAC-CALXEDA
+M:	Doug Thompson <dougthompson@xmission.com>
+M:	Robert Richter <rric@kernel.org>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/highbank*
+
 EDAC-CAVIUM
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	David Daney <david.daney@cavium.com>
@@ -3145,6 +3154,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
+EDAC-MPC85XX
+M:	Johannes Thumshirn <johannes.thumshirn@men.de>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/mpc85xx_edac.[ch]
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org
@@ -4024,12 +4040,26 @@ W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
+HSI SUBSYSTEM
+M:	Sebastian Reichel <sre@debian.org>
+S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-hsi
+F:	drivers/hsi/
+F:	include/linux/hsi/
+F:	include/uapi/linux/hsi/
+
 HSO 3G MODEM DRIVER
 M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
+HSR NETWORK PROTOCOL
+M:	Arvid Brodin <arvid.brodin@alten.se>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/hsr/
+
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
@@ -4051,6 +4081,7 @@ F:	arch/x86/include/uapi/asm/hyperv.h
 F:	arch/x86/kernel/cpu/mshyperv.c
 F:	drivers/hid/hid-hyperv.c
 F:	drivers/hv/
+F:	drivers/input/serio/hyperv-keyboard.c
 F:	drivers/net/hyperv/
 F:	drivers/scsi/storvsc_drv.c
 F:	drivers/video/hyperv_fb.c
@@ -5241,7 +5272,7 @@ S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
 F:	include/linux/lockdep.h
-F:	kernel/lockdep*
+F:	kernel/locking/
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
 M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
@@ -5953,10 +5984,10 @@ F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <Trond.Myklebust@netapp.com>
+M:	Trond Myklebust <trond.myklebust@primarydata.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
-T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T:	git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
 S:	Maintained
 F:	fs/lockd/
 F:	fs/nfs/
@@ -6223,8 +6254,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <rob.herring@calxeda.com>
 M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
-M:	Stephen Warren <swarren@wwwdotorg.org>
 M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
+M:	Kumar Gala <galak@codeaurora.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/
@@ -6785,8 +6816,7 @@ PWM SUBSYSTEM
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-pwm@vger.kernel.org
 S:	Maintained
-W:	http://gitorious.org/linux-pwm
-T:	git git://gitorious.org/linux-pwm/linux-pwm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
 F:	Documentation/pwm.txt
 F:	Documentation/devicetree/bindings/pwm/
 F:	include/linux/pwm.h
@@ -7366,7 +7396,6 @@ S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
-F:	kernel/wait.c
 F:	include/linux/wait.h
 
 SCORE ARCHITECTURE
@@ -7502,9 +7531,10 @@ SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
 M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
+M:	Paul Moore <paul@paul-moore.com>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
-T:	git git://git.infradead.org/users/eparis/selinux.git
+T:	git git://git.infradead.org/users/pcmoore/selinux
 S:	Supported
 F:	include/linux/selinux*
 F:	security/selinux/
@@ -8651,6 +8681,7 @@ F:	drivers/media/usb/tm6000/
 TPM DEVICE DRIVER
 M:	Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
 M:	Ashley Lai <ashley@ashleylai.com>
+M:	Peter Huewe <peterhuewe@gmx.de>
 M:	Rajiv Andrade <mail@srajiv.net>
 W:	http://tpmdd.sourceforge.net
 M:	Marcel Selhorst <tpmdd@selhorst.net>
@@ -8947,8 +8978,8 @@ USB PEGASUS DRIVER
 M:	Petko Manolov <petkan@nucleusys.com>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
-T:	git git://git.code.sf.net/p/pegasus2/git
-W:	http://pegasus2.sourceforge.net/
+T:	git git://github.com/petkan/pegasus.git
+W:	https://github.com/petkan/pegasus
 S:	Maintained
 F:	drivers/net/usb/pegasus.*
 
@@ -8969,8 +9000,8 @@ USB RTL8150 DRIVER
 M:	Petko Manolov <petkan@nucleusys.com>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
-T:	git git://git.code.sf.net/p/pegasus2/git
-W:	http://pegasus2.sourceforge.net/
+T:	git git://github.com/petkan/rtl8150.git
+W:	https://github.com/petkan/rtl8150
 S:	Maintained
 F:	drivers/net/usb/rtl8150.c
 
@@ -9509,8 +9540,8 @@ F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
+M:	Dave Chinner <dchinner@fromorbit.com>
 M:	Ben Myers <bpm@sgi.com>
-M:	Alex Elder <elder@kernel.org>
 M:	xfs@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
-PATCHLEVEL = 12
+PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc3
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -16,8 +16,8 @@ config ALPHA
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_CMOS_UPDATE
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HAVE_MOD_ARCH_SPECIFIC
@@ -488,6 +488,20 @@ config VGA_HOSE
 	  which always have multiple hoses, and whose consoles support it.
 
 
+config ALPHA_QEMU
+	bool "Run under QEMU emulation"
+	depends on !ALPHA_GENERIC
+	---help---
+	  Assume the presence of special features supported by QEMU PALcode
+	  that reduce the overhead of system emulation.
+
+	  Generic kernels will auto-detect QEMU.  But when building a
+	  system-specific kernel, the assumption is that we want to
+	  elimiate as many runtime tests as possible.
+
+	  If unsure, say N.
+
+
 config ALPHA_SRM
 	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
 	depends on TTY
@@ -572,6 +586,30 @@ config NUMA
 	  Access).  This option is for configuring high-end multiprocessor
 	  server machines.  If in doubt, say N.
 
+config ALPHA_WTINT
+	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
+	default y if ALPHA_QEMU
+	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if !ALPHA_SRM && !ALPHA_GENERIC
+	default y if SMP
+	---help---
+	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
+	  to sleep until the next interrupt.  This may reduce the power
+	  consumed, and the heat produced by the computer.  However, it has
+	  the side effect of making the cycle counter unreliable as a timing
+	  device across the sleep.
+
+	  For emulation under QEMU, definitely say Y here, as we have other
+	  mechanisms for measuring time than the cycle counter.
+
+	  For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
+	  MILO, sleep mode is not supported so you might as well say N here.
+
+	  For SMP systems we cannot use the cycle counter for timing anyway,
+	  so you might as well say Y here.
+
+	  If unsure, say N.
+
 config NODES_SHIFT
 	int
 	default "7"
@@ -613,9 +651,41 @@ config VERBOSE_MCHECK_ON
 
 	  Take the default (1) unless you want more control or more info.
 
+choice
+	prompt "Timer interrupt frequency (HZ)?"
+	default HZ_128 if ALPHA_QEMU
+	default HZ_1200 if ALPHA_RAWHIDE
+	default HZ_1024
+	---help---
+	  The frequency at which timer interrupts occur.  A high frequency
+	  minimizes latency, whereas a low frequency minimizes overhead of
+	  process accounting.  The later effect is especially significant
+	  when being run under QEMU.
+
+	  Note that some Alpha hardware cannot change the interrupt frequency
+	  of the timer.  If unsure, say 1024 (or 1200 for Rawhide).
+
+	config HZ_32
+		bool "32 Hz"
+	config HZ_64
+		bool "64 Hz"
+	config HZ_128
+		bool "128 Hz"
+	config HZ_256
+		bool "256 Hz"
+	config HZ_1024
+		bool "1024 Hz"
+	config HZ_1200
+		bool "1200 Hz"
+endchoice
+
 config HZ
-	int
-	default 1200 if ALPHA_RAWHIDE
+	int 
+	default 32 if HZ_32
+	default 64 if HZ_64
+	default 128 if HZ_128
+	default 256 if HZ_256
+	default 1200 if HZ_1200
 	default 1024
 
 source "drivers/pci/Kconfig"

arch/alpha/include/asm/machvec.h

@@ -33,6 +33,7 @@ struct alpha_machine_vector
 
 	int nr_irqs;
 	int rtc_port;
+	int rtc_boot_cpu_only;
 	unsigned int max_asn;
 	unsigned long max_isa_dma_address;
 	unsigned long irq_probe_mask;
@@ -95,9 +96,6 @@ struct alpha_machine_vector
 
 	struct _alpha_agp_info *(*agp_info)(void);
 
-	unsigned int (*rtc_get_time)(struct rtc_time *);
-	int (*rtc_set_time)(struct rtc_time *);
-
 	const char *vector_name;
 
 	/* NUMA information */
@@ -126,13 +124,19 @@ extern struct alpha_machine_vector alpha_mv;
 
 #ifdef CONFIG_ALPHA_GENERIC
 extern int alpha_using_srm;
+extern int alpha_using_qemu;
 #else
-#ifdef CONFIG_ALPHA_SRM
-#define alpha_using_srm 1
-#else
-#define alpha_using_srm 0
-#endif
+# ifdef CONFIG_ALPHA_SRM
+#  define alpha_using_srm 1
+# else
+#  define alpha_using_srm 0
+# endif
+# ifdef CONFIG_ALPHA_QEMU
+#  define alpha_using_qemu 1
+# else
+#  define alpha_using_qemu 0
+# endif
 #endif /* GENERIC */
 
-#endif
+#endif /* __KERNEL__ */
 #endif /* __ALPHA_MACHVEC_H */

arch/alpha/include/asm/pal.h

@@ -89,6 +89,7 @@ __CALL_PAL_W1(wrmces, unsigned long);
 __CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
 __CALL_PAL_W1(wrusp, unsigned long);
 __CALL_PAL_W1(wrvptptr, unsigned long);
+__CALL_PAL_RW1(wtint, unsigned long, unsigned long);
 
 /*
  * TB routines..
@@ -111,5 +112,75 @@ __CALL_PAL_W1(wrvptptr, unsigned long);
 #define tbiap()		__tbi(-1, /* no second argument */)
 #define tbia()		__tbi(-2, /* no second argument */)
 
+/*
+ * QEMU Cserv routines..
+ */
+
+static inline unsigned long
+qemu_get_walltime(void)
+{
+	register unsigned long v0 __asm__("$0");
+	register unsigned long a0 __asm__("$16") = 3;
+
+	asm("call_pal %2 # cserve get_time"
+	    : "=r"(v0), "+r"(a0)
+	    : "i"(PAL_cserve)
+	    : "$17", "$18", "$19", "$20", "$21");
+
+	return v0;
+}
+
+static inline unsigned long
+qemu_get_alarm(void)
+{
+	register unsigned long v0 __asm__("$0");
+	register unsigned long a0 __asm__("$16") = 4;
+
+	asm("call_pal %2 # cserve get_alarm"
+	    : "=r"(v0), "+r"(a0)
+	    : "i"(PAL_cserve)
+	    : "$17", "$18", "$19", "$20", "$21");
+
+	return v0;
+}
+
+static inline void
+qemu_set_alarm_rel(unsigned long expire)
+{
+	register unsigned long a0 __asm__("$16") = 5;
+	register unsigned long a1 __asm__("$17") = expire;
+
+	asm volatile("call_pal %2 # cserve set_alarm_rel"
+		     : "+r"(a0), "+r"(a1)
+		     : "i"(PAL_cserve)
+		     : "$0", "$18", "$19", "$20", "$21");
+}
+
+static inline void
+qemu_set_alarm_abs(unsigned long expire)
+{
+	register unsigned long a0 __asm__("$16") = 6;
+	register unsigned long a1 __asm__("$17") = expire;
+
+	asm volatile("call_pal %2 # cserve set_alarm_abs"
+		     : "+r"(a0), "+r"(a1)
+		     : "i"(PAL_cserve)
+		     : "$0", "$18", "$19", "$20", "$21");
+}
+
+static inline unsigned long
+qemu_get_vmtime(void)
+{
+	register unsigned long v0 __asm__("$0");
+	register unsigned long a0 __asm__("$16") = 7;
+
+	asm("call_pal %2 # cserve get_time"
+	    : "=r"(v0), "+r"(a0)
+	    : "i"(PAL_cserve)
+	    : "$17", "$18", "$19", "$20", "$21");
+
+	return v0;
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* __ALPHA_PAL_H */

arch/alpha/include/asm/rtc.h

@@ -1,12 +1 @@
-#ifndef _ALPHA_RTC_H
-#define _ALPHA_RTC_H
-
-#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
- || defined(CONFIG_ALPHA_GENERIC)
-# define get_rtc_time		alpha_mv.rtc_get_time
-# define set_rtc_time		alpha_mv.rtc_set_time
-#endif
-
 #include <asm-generic/rtc.h>
-
-#endif

arch/alpha/include/asm/string.h

@@ -22,15 +22,27 @@ extern void * __memcpy(void *, const void *, size_t);
 
 #define __HAVE_ARCH_MEMSET
 extern void * __constant_c_memset(void *, unsigned long, size_t);
+extern void * ___memset(void *, int, size_t);
 extern void * __memset(void *, int, size_t);
 extern void * memset(void *, int, size_t);
 
-#define memset(s, c, n)							    \
-(__builtin_constant_p(c)						    \
- ? (__builtin_constant_p(n) && (c) == 0					    \
-    ? __builtin_memset((s),0,(n)) 					    \
-    : __constant_c_memset((s),0x0101010101010101UL*(unsigned char)(c),(n))) \
- : __memset((s),(c),(n)))
+/* For gcc 3.x, we cannot have the inline function named "memset" because
+   the __builtin_memset will attempt to resolve to the inline as well,
+   leading to a "sorry" about unimplemented recursive inlining.  */
+extern inline void *__memset(void *s, int c, size_t n)
+{
+	if (__builtin_constant_p(c)) {
+		if (__builtin_constant_p(n)) {
+			return __builtin_memset(s, c, n);
+		} else {
+			unsigned long c8 = (c & 0xff) * 0x0101010101010101UL;
+			return __constant_c_memset(s, c8, n);
+		}
+	}
+	return ___memset(s, c, n);
+}
+
+#define memset __memset
 
 #define __HAVE_ARCH_STRCPY
 extern char * strcpy(char *,const char *);

arch/alpha/include/asm/thread_info.h

@@ -58,8 +58,6 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define THREAD_SIZE_ORDER 1
 #define THREAD_SIZE (2*PAGE_SIZE)
 
-#define PREEMPT_ACTIVE		0x40000000
-
 /*
  * Thread information flags:
  * - these are process state flags and used from assembly

arch/alpha/include/uapi/asm/pal.h

@@ -46,6 +46,7 @@
 #define PAL_rdusp	58
 #define PAL_whami	60
 #define PAL_retsys	61
+#define PAL_wtint	62
 #define PAL_rti		63
 
 

arch/alpha/kernel/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o pci-sysfs.o
 obj-$(CONFIG_SRM_ENV)	+= srm_env.o
 obj-$(CONFIG_MODULES)	+= module.o
 obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_RTC_DRV_ALPHA) += rtc.o
 
 ifdef CONFIG_ALPHA_GENERIC
 

arch/alpha/kernel/alpha_ksyms.c

@@ -40,6 +40,7 @@ EXPORT_SYMBOL(strrchr);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(__memcpy);
 EXPORT_SYMBOL(__memset);
+EXPORT_SYMBOL(___memset);
 EXPORT_SYMBOL(__memsetw);
 EXPORT_SYMBOL(__constant_c_memset);
 EXPORT_SYMBOL(copy_page);

arch/alpha/kernel/irq_alpha.c

@@ -66,21 +66,7 @@ do_entInt(unsigned long type, unsigned long vector,
 		break;
 	case 1:
 		old_regs = set_irq_regs(regs);
-#ifdef CONFIG_SMP
-	  {
-		long cpu;
-
-		smp_percpu_timer_interrupt(regs);
-		cpu = smp_processor_id();
-		if (cpu != boot_cpuid) {
-		        kstat_incr_irqs_this_cpu(RTC_IRQ, irq_to_desc(RTC_IRQ));
-		} else {
-			handle_irq(RTC_IRQ);
-		}
-	  }
-#else
 		handle_irq(RTC_IRQ);
-#endif
 		set_irq_regs(old_regs);
 		return;
 	case 2:
@@ -228,7 +214,7 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
  */
 
 struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
+	.handler	= rtc_timer_interrupt,
 	.name		= "timer",
 };
 

arch/alpha/kernel/machvec_impl.h

@@ -43,10 +43,7 @@
 #define CAT1(x,y)  x##y
 #define CAT(x,y)   CAT1(x,y)
 
-#define DO_DEFAULT_RTC \
-	.rtc_port = 0x70, \
-	.rtc_get_time = common_get_rtc_time, \
-	.rtc_set_time = common_set_rtc_time
+#define DO_DEFAULT_RTC			.rtc_port = 0x70
 
 #define DO_EV4_MMU							\
 	.max_asn =			EV4_MAX_ASN,			\

arch/alpha/kernel/perf_event.c

@@ -83,6 +83,8 @@ struct alpha_pmu_t {
 	long pmc_left[3];
 	 /* Subroutine for allocation of PMCs.  Enforces constraints. */
 	int (*check_constraints)(struct perf_event **, unsigned long *, int);
+	/* Subroutine for checking validity of a raw event for this PMU. */
+	int (*raw_event_valid)(u64 config);
 };
 
 /*
@@ -203,6 +205,12 @@ success:
 }
 
 
+static int ev67_raw_event_valid(u64 config)
+{
+	return config >= EV67_CYCLES && config < EV67_LAST_ET;
+};
+
+
 static const struct alpha_pmu_t ev67_pmu = {
 	.event_map = ev67_perfmon_event_map,
 	.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
@@ -211,7 +219,8 @@ static const struct alpha_pmu_t ev67_pmu = {
 	.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK,  EV67_PCTR_1_COUNT_MASK,  0},
 	.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
 	.pmc_left = {16, 4, 0},
-	.check_constraints = ev67_check_constraints
+	.check_constraints = ev67_check_constraints,
+	.raw_event_valid = ev67_raw_event_valid,
 };
 
 
@@ -609,7 +618,9 @@ static int __hw_perf_event_init(struct perf_event *event)
 	} else if (attr->type == PERF_TYPE_HW_CACHE) {
 		return -EOPNOTSUPP;
 	} else if (attr->type == PERF_TYPE_RAW) {
-		ev = attr->config & 0xff;
+		if (!alpha_pmu->raw_event_valid(attr->config))
+			return -EINVAL;
+		ev = attr->config;
 	} else {
 		return -EOPNOTSUPP;
 	}

arch/alpha/kernel/process.c

@@ -46,6 +46,23 @@
 void (*pm_power_off)(void) = machine_power_off;
 EXPORT_SYMBOL(pm_power_off);
 
+#ifdef CONFIG_ALPHA_WTINT
+/*
+ * Sleep the CPU.
+ * EV6, LCA45 and QEMU know how to power down, skipping N timer interrupts.
+ */
+void arch_cpu_idle(void)
+{
+	wtint(0);
+	local_irq_enable();
+}
+
+void arch_cpu_idle_dead(void)
+{
+	wtint(INT_MAX);
+}
+#endif /* ALPHA_WTINT */
+
 struct halt_info {
 	int mode;
 	char *restart_cmd;

arch/alpha/kernel/proto.h

@@ -135,17 +135,15 @@ extern void unregister_srm_console(void);
 /* smp.c */
 extern void setup_smp(void);
 extern void handle_ipi(struct pt_regs *);
-extern void smp_percpu_timer_interrupt(struct pt_regs *);
 
 /* bios32.c */
 /* extern void reset_for_srm(void); */
 
 /* time.c */
-extern irqreturn_t timer_interrupt(int irq, void *dev);
+extern irqreturn_t rtc_timer_interrupt(int irq, void *dev);
+extern void init_clockevent(void);
 extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
-extern unsigned int common_get_rtc_time(struct rtc_time *time);
-extern int common_set_rtc_time(struct rtc_time *time);
 
 /* smc37c93x.c */
 extern void SMC93x_Init(void);

arch/alpha/kernel/rtc.c

@@ -0,0 +1,323 @@
+/*
+ *  linux/arch/alpha/kernel/rtc.c
+ *
+ *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
+ *
+ * This file contains date handling.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <asm/rtc.h>
+
+#include "proto.h"
+
+
+/*
+ * Support for the RTC device.
+ *
+ * We don't want to use the rtc-cmos driver, because we don't want to support
+ * alarms, as that would be indistinguishable from timer interrupts.
+ *
+ * Further, generic code is really, really tied to a 1900 epoch.  This is
+ * true in __get_rtc_time as well as the users of struct rtc_time e.g.
+ * rtc_tm_to_time.  Thankfully all of the other epochs in use are later
+ * than 1900, and so it's easy to adjust.
+ */
+
+static unsigned long rtc_epoch;
+
+static int __init
+specifiy_epoch(char *str)
+{
+	unsigned long epoch = simple_strtoul(str, NULL, 0);
+	if (epoch < 1900)
+		printk("Ignoring invalid user specified epoch %lu\n", epoch);
+	else
+		rtc_epoch = epoch;
+	return 1;
+}
+__setup("epoch=", specifiy_epoch);
+
+static void __init
+init_rtc_epoch(void)
+{
+	int epoch, year, ctrl;
+
+	if (rtc_epoch != 0) {
+		/* The epoch was specified on the command-line.  */
+		return;
+	}
+
+	/* Detect the epoch in use on this computer.  */
+	ctrl = CMOS_READ(RTC_CONTROL);
+	year = CMOS_READ(RTC_YEAR);
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		year = bcd2bin(year);
+
+	/* PC-like is standard; used for year >= 70 */
+	epoch = 1900;
+	if (year < 20) {
+		epoch = 2000;
+	} else if (year >= 20 && year < 48) {
+		/* NT epoch */
+		epoch = 1980;
+	} else if (year >= 48 && year < 70) {
+		/* Digital UNIX epoch */
+		epoch = 1952;
+	}
+	rtc_epoch = epoch;
+
+	printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year);
+}
+
+static int
+alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	__get_rtc_time(tm);
+
+	/* Adjust for non-default epochs.  It's easier to depend on the
+	   generic __get_rtc_time and adjust the epoch here than create
+	   a copy of __get_rtc_time with the edits we need.  */
+	if (rtc_epoch != 1900) {
+		int year = tm->tm_year;
+		/* Undo the century adjustment made in __get_rtc_time.  */
+		if (year >= 100)
+			year -= 100;
+		year += rtc_epoch - 1900;
+		/* Redo the century adjustment with the epoch in place.  */
+		if (year <= 69)
+			year += 100;
+		tm->tm_year = year;
+	}
+
+	return rtc_valid_tm(tm);
+}
+
+static int
+alpha_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rtc_time xtm;
+
+	if (rtc_epoch != 1900) {
+		xtm = *tm;
+		xtm.tm_year -= rtc_epoch - 1900;
+		tm = &xtm;
+	}
+
+	return __set_rtc_time(tm);
+}
+
+static int
+alpha_rtc_set_mmss(struct device *dev, unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+
+	/* Note: This code only updates minutes and seconds.  Comments
+	   indicate this was to avoid messing with unknown time zones,
+	   and with the epoch nonsense described above.  In order for
+	   this to work, the existing clock cannot be off by more than
+	   15 minutes.
+
+	   ??? This choice is may be out of date.  The x86 port does
+	   not have problems with timezones, and the epoch processing has
+	   now been fixed in alpha_set_rtc_time.
+
+	   In either case, one can always force a full rtc update with
+	   the userland hwclock program, so surely 15 minute accuracy
+	   is no real burden.  */
+
+	/* In order to set the CMOS clock precisely, we have to be called
+	   500 ms after the second nowtime has started, because when
+	   nowtime is written into the registers of the CMOS clock, it will
+	   jump to the next second precisely 500 ms later. Check the Motorola
+	   MC146818A or Dallas DS12887 data sheet for details.  */
+
+	/* irq are locally disabled here */
+	spin_lock(&rtc_lock);
+	/* Tell the clock it's being set */
+	save_control = CMOS_READ(RTC_CONTROL);
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	/* Stop and reset prescaler */
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		cmos_minutes = bcd2bin(cmos_minutes);
+
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) {
+		/* correct for half hour time zone */
+		real_minutes += 30;
+	}
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else {
+		printk_once(KERN_NOTICE
+			    "set_rtc_mmss: can't update from %d to %d\n",
+			    cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+	spin_unlock(&rtc_lock);
+
+	return retval;
+}
+
+static int
+alpha_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case RTC_EPOCH_READ:
+		return put_user(rtc_epoch, (unsigned long __user *)arg);
+	case RTC_EPOCH_SET:
+		if (arg < 1900)
+			return -EINVAL;
+		rtc_epoch = arg;
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static const struct rtc_class_ops alpha_rtc_ops = {
+	.read_time = alpha_rtc_read_time,
+	.set_time = alpha_rtc_set_time,
+	.set_mmss = alpha_rtc_set_mmss,
+	.ioctl = alpha_rtc_ioctl,
+};
+
+/*
+ * Similarly, except do the actual CMOS access on the boot cpu only.
+ * This requires marshalling the data across an interprocessor call.
+ */
+
+#if defined(CONFIG_SMP) && \
+    (defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_MARVEL))
+# define HAVE_REMOTE_RTC 1
+
+union remote_data {
+	struct rtc_time *tm;
+	unsigned long now;
+	long retval;
+};
+
+static void
+do_remote_read(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_read_time(NULL, x->tm);
+}
+
+static int
+remote_read_time(struct device *dev, struct rtc_time *tm)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.tm = tm;
+		smp_call_function_single(boot_cpuid, do_remote_read, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_read_time(NULL, tm);
+}
+
+static void
+do_remote_set(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_set_time(NULL, x->tm);
+}
+
+static int
+remote_set_time(struct device *dev, struct rtc_time *tm)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.tm = tm;
+		smp_call_function_single(boot_cpuid, do_remote_set, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_set_time(NULL, tm);
+}
+
+static void
+do_remote_mmss(void *data)
+{
+	union remote_data *x = data;
+	x->retval = alpha_rtc_set_mmss(NULL, x->now);
+}
+
+static int
+remote_set_mmss(struct device *dev, unsigned long now)
+{
+	union remote_data x;
+	if (smp_processor_id() != boot_cpuid) {
+		x.now = now;
+		smp_call_function_single(boot_cpuid, do_remote_mmss, &x, 1);
+		return x.retval;
+	}
+	return alpha_rtc_set_mmss(NULL, now);
+}
+
+static const struct rtc_class_ops remote_rtc_ops = {
+	.read_time = remote_read_time,
+	.set_time = remote_set_time,
+	.set_mmss = remote_set_mmss,
+	.ioctl = alpha_rtc_ioctl,
+};
+#endif
+
+static int __init
+alpha_rtc_init(void)
+{
+	const struct rtc_class_ops *ops;
+	struct platform_device *pdev;
+	struct rtc_device *rtc;
+	const char *name;
+
+	init_rtc_epoch();
+	name = "rtc-alpha";
+	ops = &alpha_rtc_ops;
+
+#ifdef HAVE_REMOTE_RTC
+	if (alpha_mv.rtc_boot_cpu_only)
+		ops = &remote_rtc_ops;
+#endif
+
+	pdev = platform_device_register_simple(name, -1, NULL, 0);
+	rtc = devm_rtc_device_register(&pdev->dev, name, ops, THIS_MODULE);
+	if (IS_ERR(rtc))
+		return PTR_ERR(rtc);
+
+	platform_set_drvdata(pdev, rtc);
+	return 0;
+}
+device_initcall(alpha_rtc_init);

arch/alpha/kernel/setup.c

@@ -115,10 +115,17 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
 
 #ifdef CONFIG_ALPHA_GENERIC
 struct alpha_machine_vector alpha_mv;
+#endif
+
+#ifndef alpha_using_srm
 int alpha_using_srm;
 EXPORT_SYMBOL(alpha_using_srm);
 #endif
 
+#ifndef alpha_using_qemu
+int alpha_using_qemu;
+#endif
+
 static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
 					       unsigned long);
 static struct alpha_machine_vector *get_sysvec_byname(const char *);
@@ -529,11 +536,15 @@ setup_arch(char **cmdline_p)
 	atomic_notifier_chain_register(&panic_notifier_list,
 			&alpha_panic_block);
 
-#ifdef CONFIG_ALPHA_GENERIC
+#ifndef alpha_using_srm
 	/* Assume that we've booted from SRM if we haven't booted from MILO.
 	   Detect the later by looking for "MILO" in the system serial nr.  */
 	alpha_using_srm = strncmp((const char *)hwrpb->ssn, "MILO", 4) != 0;
 #endif
+#ifndef alpha_using_qemu
+	/* Similarly, look for QEMU.  */
+	alpha_using_qemu = strstr((const char *)hwrpb->ssn, "QEMU") != 0;
+#endif
 
 	/* If we are using SRM, we want to allow callbacks
 	   as early as possible, so do this NOW, and then
@@ -1207,6 +1218,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
 	char *systype_name;
 	char *sysvariation_name;
 	int nr_processors;
+	unsigned long timer_freq;
 
 	cpu_index = (unsigned) (cpu->type - 1);
 	cpu_name = "Unknown";
@@ -1218,6 +1230,12 @@ show_cpuinfo(struct seq_file *f, void *slot)
 
 	nr_processors = get_nr_processors(cpu, hwrpb->nr_processors);
 
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+	timer_freq = (100UL * hwrpb->intr_freq) / 4096;
+#else
+	timer_freq = 100UL * CONFIG_HZ;
+#endif
+
 	seq_printf(f, "cpu\t\t\t: Alpha\n"
 		      "cpu model\t\t: %s\n"
 		      "cpu variation\t\t: %ld\n"
@@ -1243,8 +1261,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
 		       (char*)hwrpb->ssn,
 		       est_cycle_freq ? : hwrpb->cycle_freq,
 		       est_cycle_freq ? "est." : "",
-		       hwrpb->intr_freq / 4096,
-		       (100 * hwrpb->intr_freq / 4096) % 100,
+		       timer_freq / 100, timer_freq % 100,
 		       hwrpb->pagesize,
 		       hwrpb->pa_bits,
 		       hwrpb->max_asn,

arch/alpha/kernel/smp.c

@@ -138,9 +138,11 @@ smp_callin(void)
 
 	/* Get our local ticker going. */
 	smp_setup_percpu_timer(cpuid);
+	init_clockevent();
 
 	/* Call platform-specific callin, if specified */
-	if (alpha_mv.smp_callin) alpha_mv.smp_callin();
+	if (alpha_mv.smp_callin)
+		alpha_mv.smp_callin();
 
 	/* All kernel threads share the same mm context.  */
 	atomic_inc(&init_mm.mm_count);
@@ -498,35 +500,6 @@ smp_cpus_done(unsigned int max_cpus)
 	       ((bogosum + 2500) / (5000/HZ)) % 100);
 }
 
-
-void
-smp_percpu_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	int cpu = smp_processor_id();
-	unsigned long user = user_mode(regs);
-	struct cpuinfo_alpha *data = &cpu_data[cpu];
-
-	old_regs = set_irq_regs(regs);
-
-	/* Record kernel PC.  */
-	profile_tick(CPU_PROFILING);
-
-	if (!--data->prof_counter) {
-		/* We need to make like a normal interrupt -- otherwise
-		   timer interrupts ignore the global interrupt lock,
-		   which would be a Bad Thing.  */
-		irq_enter();
-
-		update_process_times(user);
-
-		data->prof_counter = data->prof_multiplier;
-
-		irq_exit();
-	}
-	set_irq_regs(old_regs);
-}
-
 int
 setup_profiling_timer(unsigned int multiplier)
 {

arch/alpha/kernel/sys_jensen.c

@@ -224,8 +224,6 @@ struct alpha_machine_vector jensen_mv __initmv = {
 	.machine_check		= jensen_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
 	.rtc_port		= 0x170,
-	.rtc_get_time		= common_get_rtc_time,
-	.rtc_set_time		= common_set_rtc_time,
 
 	.nr_irqs		= 16,
 	.device_interrupt	= jensen_device_interrupt,

arch/alpha/kernel/sys_marvel.c

@@ -22,7 +22,6 @@
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
 #include <asm/vga.h>
-#include <asm/rtc.h>
 
 #include "proto.h"
 #include "err_impl.h"
@@ -400,57 +399,6 @@ marvel_init_rtc(void)
 	init_rtc_irq();
 }
 
-struct marvel_rtc_time {
-	struct rtc_time *time;
-	int retval;
-};
-
-#ifdef CONFIG_SMP
-static void
-smp_get_rtc_time(void *data)
-{
-	struct marvel_rtc_time *mrt = data;
-	mrt->retval = __get_rtc_time(mrt->time);
-}
-
-static void
-smp_set_rtc_time(void *data)
-{
-	struct marvel_rtc_time *mrt = data;
-	mrt->retval = __set_rtc_time(mrt->time);
-}
-#endif
-
-static unsigned int
-marvel_get_rtc_time(struct rtc_time *time)
-{
-#ifdef CONFIG_SMP
-	struct marvel_rtc_time mrt;
-
-	if (smp_processor_id() != boot_cpuid) {
-		mrt.time = time;
-		smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
-		return mrt.retval;
-	}
-#endif
-	return __get_rtc_time(time);
-}
-
-static int
-marvel_set_rtc_time(struct rtc_time *time)
-{
-#ifdef CONFIG_SMP
-	struct marvel_rtc_time mrt;
-
-	if (smp_processor_id() != boot_cpuid) {
-		mrt.time = time;
-		smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
-		return mrt.retval;
-	}
-#endif
-	return __set_rtc_time(time);
-}
-
 static void
 marvel_smp_callin(void)
 {
@@ -492,8 +440,7 @@ struct alpha_machine_vector marvel_ev7_mv __initmv = {
 	.vector_name		= "MARVEL/EV7",
 	DO_EV7_MMU,
 	.rtc_port		= 0x70,
-	.rtc_get_time		= marvel_get_rtc_time,
-	.rtc_set_time		= marvel_set_rtc_time,
+	.rtc_boot_cpu_only	= 1,
 	DO_MARVEL_IO,
 	.machine_check		= marvel_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,

arch/alpha/kernel/time.c

@@ -3,13 +3,7 @@
  *
  *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
  *
- * This file contains the PC-specific time handling details:
- * reading the RTC at bootup, etc..
- * 1994-07-02    Alan Modra
- *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
- * 1995-03-26    Markus Kuhn
- *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
- *      precision CMOS clock update
+ * This file contains the clocksource time handling.
  * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
  *		"A Kernel Model for Precision Timekeeping" by Dave Mills
  * 1997-01-09    Adrian Sun
@@ -21,9 +15,6 @@
  * 1999-04-16	Thorsten Kranzkowski (dl8bcu@gmx.net)
  *	fixed algorithm in do_gettimeofday() for calculating the precise time
  *	from processor cycle counter (now taking lost_ticks into account)
- * 2000-08-13	Jan-Benedict Glaw <jbglaw@lug-owl.de>
- * 	Fixed time_init to be aware of epoches != 1900. This prevents
- * 	booting up in 2048 for me;) Code is stolen from rtc.c.
  * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
  *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
  */
@@ -46,40 +37,19 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/hwrpb.h>
-#include <asm/rtc.h>
 
 #include <linux/mc146818rtc.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include "proto.h"
 #include "irq_impl.h"
 
-static int set_rtc_mmss(unsigned long);
-
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL(rtc_lock);
 
-#define TICK_SIZE (tick_nsec / 1000)
-
-/*
- * Shift amount by which scaled_ticks_per_cycle is scaled.  Shifting
- * by 48 gives us 16 bits for HZ while keeping the accuracy good even
- * for large CPU clock rates.
- */
-#define FIX_SHIFT	48
-
-/* lump static variables together for more efficient access: */
-static struct {
-	/* cycle counter last time it got invoked */
-	__u32 last_time;
-	/* ticks/cycle * 2^48 */
-	unsigned long scaled_ticks_per_cycle;
-	/* partial unused tick */
-	unsigned long partial_tick;
-} state;
-
 unsigned long est_cycle_freq;
 
 #ifdef CONFIG_IRQ_WORK
@@ -108,109 +78,156 @@ static inline __u32 rpcc(void)
 	return __builtin_alpha_rpcc();
 }
 
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
 
-void read_persistent_clock(struct timespec *ts)
+
+/*
+ * The RTC as a clock_event_device primitive.
+ */
+
+static DEFINE_PER_CPU(struct clock_event_device, cpu_ce);
+
+irqreturn_t
+rtc_timer_interrupt(int irq, void *dev)
 {
-	unsigned int year, mon, day, hour, min, sec, epoch;
-
-	sec = CMOS_READ(RTC_SECONDS);
-	min = CMOS_READ(RTC_MINUTES);
-	hour = CMOS_READ(RTC_HOURS);
-	day = CMOS_READ(RTC_DAY_OF_MONTH);
-	mon = CMOS_READ(RTC_MONTH);
-	year = CMOS_READ(RTC_YEAR);
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = bcd2bin(sec);
-		min = bcd2bin(min);
-		hour = bcd2bin(hour);
-		day = bcd2bin(day);
-		mon = bcd2bin(mon);
-		year = bcd2bin(year);
-	}
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
 
-	/* PC-like is standard; used for year >= 70 */
-	epoch = 1900;
-	if (year < 20)
-		epoch = 2000;
-	else if (year >= 20 && year < 48)
-		/* NT epoch */
-		epoch = 1980;
-	else if (year >= 48 && year < 70)
-		/* Digital UNIX epoch */
-		epoch = 1952;
+	/* Don't run the hook for UNUSED or SHUTDOWN.  */
+	if (likely(ce->mode == CLOCK_EVT_MODE_PERIODIC))
+		ce->event_handler(ce);
 
-	printk(KERN_INFO "Using epoch = %d\n", epoch);
+	if (test_irq_work_pending()) {
+		clear_irq_work_pending();
+		irq_work_run();
+	}
 
-	if ((year += epoch) < 1970)
-		year += 100;
+	return IRQ_HANDLED;
+}
 
-	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
-	ts->tv_nsec = 0;
+static void
+rtc_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
+{
+	/* The mode member of CE is updated in generic code.
+	   Since we only support periodic events, nothing to do.  */
+}
+
+static int
+rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+	/* This hook is for oneshot mode, which we don't support.  */
+	return -EINVAL;
 }
 
+static void __init
+init_rtc_clockevent(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	*ce = (struct clock_event_device){
+		.name = "rtc",
+		.features = CLOCK_EVT_FEAT_PERIODIC,
+		.rating = 100,
+		.cpumask = cpumask_of(cpu),
+		.set_mode = rtc_ce_set_mode,
+		.set_next_event = rtc_ce_set_next_event,
+	};
 
+	clockevents_config_and_register(ce, CONFIG_HZ, 0, 0);
+}
 
+
 /*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
+ * The QEMU clock as a clocksource primitive.
  */
-irqreturn_t timer_interrupt(int irq, void *dev)
+
+static cycle_t
+qemu_cs_read(struct clocksource *cs)
 {
-	unsigned long delta;
-	__u32 now;
-	long nticks;
+	return qemu_get_vmtime();
+}
 
-#ifndef CONFIG_SMP
-	/* Not SMP, do kernel PC profiling here.  */
-	profile_tick(CPU_PROFILING);
-#endif
+static struct clocksource qemu_cs = {
+	.name                   = "qemu",
+	.rating                 = 400,
+	.read                   = qemu_cs_read,
+	.mask                   = CLOCKSOURCE_MASK(64),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS,
+	.max_idle_ns		= LONG_MAX
+};
 
-	/*
-	 * Calculate how many ticks have passed since the last update,
-	 * including any previous partial leftover.  Save any resulting
-	 * fraction for the next pass.
-	 */
-	now = rpcc();
-	delta = now - state.last_time;
-	state.last_time = now;
-	delta = delta * state.scaled_ticks_per_cycle + state.partial_tick;
-	state.partial_tick = delta & ((1UL << FIX_SHIFT) - 1); 
-	nticks = delta >> FIX_SHIFT;
 
-	if (nticks)
-		xtime_update(nticks);
+/*
+ * The QEMU alarm as a clock_event_device primitive.
+ */
 
-	if (test_irq_work_pending()) {
-		clear_irq_work_pending();
-		irq_work_run();
-	}
+static void
+qemu_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
+{
+	/* The mode member of CE is updated for us in generic code.
+	   Just make sure that the event is disabled.  */
+	qemu_set_alarm_abs(0);
+}
 
-#ifndef CONFIG_SMP
-	while (nticks--)
-		update_process_times(user_mode(get_irq_regs()));
-#endif
+static int
+qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+	qemu_set_alarm_rel(evt);
+	return 0;
+}
 
+static irqreturn_t
+qemu_timer_interrupt(int irq, void *dev)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	ce->event_handler(ce);
 	return IRQ_HANDLED;
 }
 
+static void __init
+init_qemu_clockevent(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	*ce = (struct clock_event_device){
+		.name = "qemu",
+		.features = CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 400,
+		.cpumask = cpumask_of(cpu),
+		.set_mode = qemu_ce_set_mode,
+		.set_next_event = qemu_ce_set_next_event,
+	};
+
+	clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX);
+}
+
+
 void __init
 common_init_rtc(void)
 {
-	unsigned char x;
+	unsigned char x, sel = 0;
 
 	/* Reset periodic interrupt frequency.  */
-	x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
-        /* Test includes known working values on various platforms
-           where 0x26 is wrong; we refuse to change those. */
-	if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
-		printk("Setting RTC_FREQ to 1024 Hz (%x)\n", x);
-		CMOS_WRITE(0x26, RTC_FREQ_SELECT);
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+ 	x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
+	/* Test includes known working values on various platforms
+	   where 0x26 is wrong; we refuse to change those. */
+ 	if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
+		sel = RTC_REF_CLCK_32KHZ + 6;
 	}
+#elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32
+	sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ);
+#else
+# error "Unknown HZ from arch/alpha/Kconfig"
+#endif
+	if (sel) {
+		printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
+		       CONFIG_HZ, sel);
+		CMOS_WRITE(sel, RTC_FREQ_SELECT);
+ 	}
 
 	/* Turn on periodic interrupts.  */
 	x = CMOS_READ(RTC_CONTROL);
@@ -233,16 +250,37 @@ common_init_rtc(void)
 	init_rtc_irq();
 }
 
-unsigned int common_get_rtc_time(struct rtc_time *time)
-{
-	return __get_rtc_time(time);
-}
+
+#ifndef CONFIG_ALPHA_WTINT
+/*
+ * The RPCC as a clocksource primitive.
+ *
+ * While we have free-running timecounters running on all CPUs, and we make
+ * a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter
+ * with the wall clock, that initialization isn't kept up-to-date across
+ * different time counters in SMP mode.  Therefore we can only use this
+ * method when there's only one CPU enabled.
+ *
+ * When using the WTINT PALcall, the RPCC may shift to a lower frequency,
+ * or stop altogether, while waiting for the interrupt.  Therefore we cannot
+ * use this method when WTINT is in use.
+ */
 
-int common_set_rtc_time(struct rtc_time *time)
+static cycle_t read_rpcc(struct clocksource *cs)
 {
-	return __set_rtc_time(time);
+	return rpcc();
 }
 
+static struct clocksource clocksource_rpcc = {
+	.name                   = "rpcc",
+	.rating                 = 300,
+	.read                   = read_rpcc,
+	.mask                   = CLOCKSOURCE_MASK(32),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
+};
+#endif /* ALPHA_WTINT */
+
+
 /* Validate a computed cycle counter result against the known bounds for
    the given processor core.  There's too much brokenness in the way of
    timing hardware for any one method to work everywhere.  :-(
@@ -353,33 +391,6 @@ rpcc_after_update_in_progress(void)
 	return rpcc();
 }
 
-#ifndef CONFIG_SMP
-/* Until and unless we figure out how to get cpu cycle counters
-   in sync and keep them there, we can't use the rpcc.  */
-static cycle_t read_rpcc(struct clocksource *cs)
-{
-	cycle_t ret = (cycle_t)rpcc();
-	return ret;
-}
-
-static struct clocksource clocksource_rpcc = {
-	.name                   = "rpcc",
-	.rating                 = 300,
-	.read                   = read_rpcc,
-	.mask                   = CLOCKSOURCE_MASK(32),
-	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
-};
-
-static inline void register_rpcc_clocksource(long cycle_freq)
-{
-	clocksource_register_hz(&clocksource_rpcc, cycle_freq);
-}
-#else /* !CONFIG_SMP */
-static inline void register_rpcc_clocksource(long cycle_freq)
-{
-}
-#endif /* !CONFIG_SMP */
-
 void __init
 time_init(void)
 {
@@ -387,6 +398,15 @@ time_init(void)
 	unsigned long cycle_freq, tolerance;
 	long diff;
 
+	if (alpha_using_qemu) {
+		clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
+		init_qemu_clockevent();
+
+		timer_irqaction.handler = qemu_timer_interrupt;
+		init_rtc_irq();
+		return;
+	}
+
 	/* Calibrate CPU clock -- attempt #1.  */
 	if (!est_cycle_freq)
 		est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
@@ -421,100 +441,25 @@ time_init(void)
 		       "and unable to estimate a proper value!\n");
 	}
 
-	/* From John Bowman <bowman@math.ualberta.ca>: allow the values
-	   to settle, as the Update-In-Progress bit going low isn't good
-	   enough on some hardware.  2ms is our guess; we haven't found 
-	   bogomips yet, but this is close on a 500Mhz box.  */
-	__delay(1000000);
-
-
-	if (HZ > (1<<16)) {
-		extern void __you_loose (void);
-		__you_loose();
-	}
-
-	register_rpcc_clocksource(cycle_freq);
-
-	state.last_time = cc1;
-	state.scaled_ticks_per_cycle
-		= ((unsigned long) HZ << FIX_SHIFT) / cycle_freq;
-	state.partial_tick = 0L;
+	/* See above for restrictions on using clocksource_rpcc.  */
+#ifndef CONFIG_ALPHA_WTINT
+	if (hwrpb->nr_processors == 1)
+		clocksource_register_hz(&clocksource_rpcc, cycle_freq);
+#endif
 
 	/* Startup the timer source. */
 	alpha_mv.init_rtc();
+	init_rtc_clockevent();
 }
 
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you won't notice until after reboot!
- */
-
-
-static int
-set_rtc_mmss(unsigned long nowtime)
+/* Initialize the clock_event_device for secondary cpus.  */
+#ifdef CONFIG_SMP
+void __init
+init_clockevent(void)
 {
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-
-	/* irq are locally disabled here */
-	spin_lock(&rtc_lock);
-	/* Tell the clock it's being set */
-	save_control = CMOS_READ(RTC_CONTROL);
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	/* Stop and reset prescaler */
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) {
-		/* correct for half hour time zone */
-		real_minutes += 30;
-	}
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
- 		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock(&rtc_lock);
-
-	return retval;
+	if (alpha_using_qemu)
+		init_qemu_clockevent();
+	else
+		init_rtc_clockevent();
 }
+#endif

arch/alpha/kernel/traps.c

@@ -241,6 +241,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			       (const char *)(data[1] | (long)data[2] << 32), 
 			       data[0]);
 		}
+#ifdef CONFIG_ALPHA_WTINT
+		if (type == 4) {
+			/* If CALL_PAL WTINT is totally unsupported by the
+			   PALcode, e.g. MILO, "emulate" it by overwriting
+			   the insn.  */
+			unsigned int *pinsn
+			  = (unsigned int *) regs->pc - 1;
+			if (*pinsn == PAL_wtint) {
+				*pinsn = 0x47e01400; /* mov 0,$0 */
+				imb();
+				regs->r0 = 0;
+				return;
+			}
+		}
+#endif /* ALPHA_WTINT */
 		die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"),
 			      regs, type, NULL);
 	}

arch/alpha/lib/csum_partial_copy.c

@@ -130,7 +130,7 @@ csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
 		*dst = word | tmp;
 		checksum += carry;
 	}
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -185,7 +185,7 @@ csum_partial_cfu_dest_aligned(const unsigned long __user *src,
 		*dst = word | tmp;
 		checksum += carry;
 	}
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -242,7 +242,7 @@ csum_partial_cfu_src_aligned(const unsigned long __user *src,
 	stq_u(partial_dest | second_dest, dst);
 out:
 	checksum += carry;
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -325,7 +325,7 @@ csum_partial_cfu_unaligned(const unsigned long __user * src,
 		stq_u(partial_dest | word | second_dest, dst);
 		checksum += carry;
 	}
-	if (err) *errp = err;
+	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -339,7 +339,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 
 	if (len) {
 		if (!access_ok(VERIFY_READ, src, len)) {
-			*errp = -EFAULT;
+			if (errp) *errp = -EFAULT;
 			memset(dst, 0, len);
 			return sum;
 		}

arch/alpha/lib/ev6-memset.S

@@ -30,14 +30,15 @@
 	.set noat
 	.set noreorder
 .text
+	.globl memset
 	.globl __memset
+	.globl ___memset
 	.globl __memsetw
 	.globl __constant_c_memset
-	.globl memset
 
-	.ent __memset
+	.ent ___memset
 .align 5
-__memset:
+___memset:
 	.frame $30,0,$26,0
 	.prologue 0
 
@@ -227,7 +228,7 @@ end_b:
 	nop
 	nop
 	ret $31,($26),1		# L0 :
-	.end __memset
+	.end ___memset
 
 	/*
 	 * This is the original body of code, prior to replication and
@@ -594,4 +595,5 @@ end_w:
 
 	.end __memsetw
 
-memset = __memset
+memset = ___memset
+__memset = ___memset

arch/alpha/lib/memset.S

@@ -19,11 +19,13 @@
 .text
 	.globl memset
 	.globl __memset
+	.globl ___memset
 	.globl __memsetw
 	.globl __constant_c_memset
-	.ent __memset
+
+	.ent ___memset
 .align 5
-__memset:
+___memset:
 	.frame $30,0,$26,0
 	.prologue 0
 
@@ -103,7 +105,7 @@ within_one_quad:
 
 end:
 	ret $31,($26),1		/* E1 */
-	.end __memset
+	.end ___memset
 
 	.align 5
 	.ent __memsetw
@@ -121,4 +123,5 @@ __memsetw:
 
 	.end __memsetw
 
-memset = __memset
+memset = ___memset
+__memset = ___memset

arch/arc/boot/dts/abilis_tb100.dtsi

@@ -43,124 +43,124 @@
 		iomux: iomux@FF10601c {
 			/* Port 1 */
 			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
-				pingrp = "mis0_pins";
+				abilis,function = "mis0";
 			};
 			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
-				pingrp = "mis1_pins";
+				abilis,function = "mis1";
 			};
 			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
-				pingrp = "gpioa_pins";
+				abilis,function = "gpioa";
 			};
 			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
-				pingrp = "mip1_pins";
+				abilis,function = "mip1";
 			};
 			/* Port 2 */
 			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
-				pingrp = "mis2_pins";
+				abilis,function = "mis2";
 			};
 			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
-				pingrp = "mis3_pins";
+				abilis,function = "mis3";
 			};
 			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
-				pingrp = "gpioc_pins";
+				abilis,function = "gpioc";
 			};
 			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
-				pingrp = "mip3_pins";
+				abilis,function = "mip3";
 			};
 			/* Port 3 */
 			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
-				pingrp = "mis4_pins";
+				abilis,function = "mis4";
 			};
 			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
-				pingrp = "mis5_pins";
+				abilis,function = "mis5";
 			};
 			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
-				pingrp = "gpioe_pins";
+				abilis,function = "gpioe";
 			};
 			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
-				pingrp = "mip5_pins";
+				abilis,function = "mip5";
 			};
 			/* Port 4 */
 			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
-				pingrp = "mis6_pins";
+				abilis,function = "mis6";
 			};
 			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
-				pingrp = "mis7_pins";
+				abilis,function = "mis7";
 			};
 			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
-				pingrp = "gpiog_pins";
+				abilis,function = "gpiog";
 			};
 			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
-				pingrp = "mip7_pins";
+				abilis,function = "mip7";
 			};
 			/* Port 5 */
 			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
-				pingrp = "gpioj_pins";
+				abilis,function = "gpioj";
 			};
 			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
-				pingrp = "gpiok_pins";
+				abilis,function = "gpiok";
 			};
 			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
-				pingrp = "ciplus_pins";
+				abilis,function = "ciplus";
 			};
 			pctl_mcard: pctl-mcard {       /* M-Card interface */
-				pingrp = "mcard_pins";
+				abilis,function = "mcard";
 			};
 			/* Port 6 */
 			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
-				pingrp = "mop_pins";
+				abilis,function = "mop";
 			};
 			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
-				pingrp = "mos0_pins";
+				abilis,function = "mos0";
 			};
 			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
-				pingrp = "mos1_pins";
+				abilis,function = "mos1";
 			};
 			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
-				pingrp = "mos2_pins";
+				abilis,function = "mos2";
 			};
 			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
-				pingrp = "mos3_pins";
+				abilis,function = "mos3";
 			};
 			/* Port 7 */
 			pctl_uart0: pctl-uart0 {       /* UART 0 */
-				pingrp = "uart0_pins";
+				abilis,function = "uart0";
 			};
 			pctl_uart1: pctl-uart1 {       /* UART 1 */
-				pingrp = "uart1_pins";
+				abilis,function = "uart1";
 			};
 			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
-				pingrp = "gpiol_pins";
+				abilis,function = "gpiol";
 			};
 			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
-				pingrp = "gpiom_pins";
+				abilis,function = "gpiom";
 			};
 			/* Port 8 */
 			pctl_spi3: pctl-spi3 {
-				pingrp = "spi3_pins";
+				abilis,function = "spi3";
 			};
 			/* Port 9 */
 			pctl_spi1: pctl-spi1 {
-				pingrp = "spi1_pins";
+				abilis,function = "spi1";
 			};
 			pctl_gpio_n: pctl-gpio-n {
-				pingrp = "gpion_pins";
+				abilis,function = "gpion";
 			};
 			/* Unmuxed GPIOs */
 			pctl_gpio_b: pctl-gpio-b {
-				pingrp = "gpiob_pins";
+				abilis,function = "gpiob";
 			};
 			pctl_gpio_d: pctl-gpio-d {
-				pingrp = "gpiod_pins";
+				abilis,function = "gpiod";
 			};
 			pctl_gpio_f: pctl-gpio-f {
-				pingrp = "gpiof_pins";
+				abilis,function = "gpiof";
 			};
 			pctl_gpio_h: pctl-gpio-h {
-				pingrp = "gpioh_pins";
+				abilis,function = "gpioh";
 			};
 			pctl_gpio_i: pctl-gpio-i {
-				pingrp = "gpioi_pins";
+				abilis,function = "gpioi";
 			};
 		};
 
@@ -172,9 +172,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF140000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <0>;
-			gpio-pins = <&pctl_gpio_a>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
 		};
 		gpiob: gpio@FF141000 {
 			compatible = "abilis,tb10x-gpio";
@@ -184,9 +185,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF141000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <3>;
-			gpio-pins = <&pctl_gpio_b>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
 		};
 		gpioc: gpio@FF142000 {
 			compatible = "abilis,tb10x-gpio";
@@ -196,9 +198,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF142000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <5>;
-			gpio-pins = <&pctl_gpio_c>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
 		};
 		gpiod: gpio@FF143000 {
 			compatible = "abilis,tb10x-gpio";
@@ -208,9 +211,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF143000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <8>;
-			gpio-pins = <&pctl_gpio_d>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
 		};
 		gpioe: gpio@FF144000 {
 			compatible = "abilis,tb10x-gpio";
@@ -220,9 +224,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF144000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <10>;
-			gpio-pins = <&pctl_gpio_e>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
 		};
 		gpiof: gpio@FF145000 {
 			compatible = "abilis,tb10x-gpio";
@@ -232,9 +237,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF145000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <13>;
-			gpio-pins = <&pctl_gpio_f>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
 		};
 		gpiog: gpio@FF146000 {
 			compatible = "abilis,tb10x-gpio";
@@ -244,9 +250,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF146000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <15>;
-			gpio-pins = <&pctl_gpio_g>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
 		};
 		gpioh: gpio@FF147000 {
 			compatible = "abilis,tb10x-gpio";
@@ -256,9 +263,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF147000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <18>;
-			gpio-pins = <&pctl_gpio_h>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
 		};
 		gpioi: gpio@FF148000 {
 			compatible = "abilis,tb10x-gpio";
@@ -268,9 +276,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF148000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <20>;
-			gpio-pins = <&pctl_gpio_i>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
 		};
 		gpioj: gpio@FF149000 {
 			compatible = "abilis,tb10x-gpio";
@@ -280,9 +289,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF149000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <32>;
-			gpio-pins = <&pctl_gpio_j>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
 		};
 		gpiok: gpio@FF14a000 {
 			compatible = "abilis,tb10x-gpio";
@@ -292,9 +302,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14A000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <64>;
-			gpio-pins = <&pctl_gpio_k>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
 		};
 		gpiol: gpio@FF14b000 {
 			compatible = "abilis,tb10x-gpio";
@@ -304,9 +315,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14B000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <86>;
-			gpio-pins = <&pctl_gpio_l>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
 		};
 		gpiom: gpio@FF14c000 {
 			compatible = "abilis,tb10x-gpio";
@@ -316,9 +328,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14C000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <90>;
-			gpio-pins = <&pctl_gpio_m>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
 		};
 		gpion: gpio@FF14d000 {
 			compatible = "abilis,tb10x-gpio";
@@ -328,9 +341,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14D000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <94>;
-			gpio-pins = <&pctl_gpio_n>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
 		};
 	};
 };

arch/arc/boot/dts/abilis_tb100_dvk.dts

@@ -64,62 +64,62 @@
 			compatible = "gpio-leds";
 			power {
 				label = "Power";
-				gpios = <&gpioi 0>;
+				gpios = <&gpioi 0 0>;
 				linux,default-trigger = "default-on";
 			};
 			heartbeat {
 				label = "Heartbeat";
-				gpios = <&gpioi 1>;
+				gpios = <&gpioi 1 0>;
 				linux,default-trigger = "heartbeat";
 			};
 			led2 {
 				label = "LED2";
-				gpios = <&gpioi 2>;
+				gpios = <&gpioi 2 0>;
 				default-state = "off";
 			};
 			led3 {
 				label = "LED3";
-				gpios = <&gpioi 3>;
+				gpios = <&gpioi 3 0>;
 				default-state = "off";
 			};
 			led4 {
 				label = "LED4";
-				gpios = <&gpioi 4>;
+				gpios = <&gpioi 4 0>;
 				default-state = "off";
 			};
 			led5 {
 				label = "LED5";
-				gpios = <&gpioi 5>;
+				gpios = <&gpioi 5 0>;
 				default-state = "off";
 			};
 			led6 {
 				label = "LED6";
-				gpios = <&gpioi 6>;
+				gpios = <&gpioi 6 0>;
 				default-state = "off";
 			};
 			led7 {
 				label = "LED7";
-				gpios = <&gpioi 7>;
+				gpios = <&gpioi 7 0>;
 				default-state = "off";
 			};
 			led8 {
 				label = "LED8";
-				gpios = <&gpioi 8>;
+				gpios = <&gpioi 8 0>;
 				default-state = "off";
 			};
 			led9 {
 				label = "LED9";
-				gpios = <&gpioi 9>;
+				gpios = <&gpioi 9 0>;
 				default-state = "off";
 			};
 			led10 {
 				label = "LED10";
-				gpios = <&gpioi 10>;
+				gpios = <&gpioi 10 0>;
 				default-state = "off";
 			};
 			led11 {
 				label = "LED11";
-				gpios = <&gpioi 11>;
+				gpios = <&gpioi 11 0>;
 				default-state = "off";
 			};
 		};

arch/arc/boot/dts/abilis_tb101.dtsi

@@ -43,133 +43,133 @@
 		iomux: iomux@FF10601c {
 			/* Port 1 */
 			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
-				pingrp = "mis0_pins";
+				abilis,function = "mis0";
 			};
 			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
-				pingrp = "mis1_pins";
+				abilis,function = "mis1";
 			};
 			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
-				pingrp = "gpioa_pins";
+				abilis,function = "gpioa";
 			};
 			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
-				pingrp = "mip1_pins";
+				abilis,function = "mip1";
 			};
 			/* Port 2 */
 			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
-				pingrp = "mis2_pins";
+				abilis,function = "mis2";
 			};
 			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
-				pingrp = "mis3_pins";
+				abilis,function = "mis3";
 			};
 			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
-				pingrp = "gpioc_pins";
+				abilis,function = "gpioc";
 			};
 			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
-				pingrp = "mip3_pins";
+				abilis,function = "mip3";
 			};
 			/* Port 3 */
 			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
-				pingrp = "mis4_pins";
+				abilis,function = "mis4";
 			};
 			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
-				pingrp = "mis5_pins";
+				abilis,function = "mis5";
 			};
 			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
-				pingrp = "gpioe_pins";
+				abilis,function = "gpioe";
 			};
 			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
-				pingrp = "mip5_pins";
+				abilis,function = "mip5";
 			};
 			/* Port 4 */
 			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
-				pingrp = "mis6_pins";
+				abilis,function = "mis6";
 			};
 			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
-				pingrp = "mis7_pins";
+				abilis,function = "mis7";
 			};
 			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
-				pingrp = "gpiog_pins";
+				abilis,function = "gpiog";
 			};
 			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
-				pingrp = "mip7_pins";
+				abilis,function = "mip7";
 			};
 			/* Port 5 */
 			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
-				pingrp = "gpioj_pins";
+				abilis,function = "gpioj";
 			};
 			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
-				pingrp = "gpiok_pins";
+				abilis,function = "gpiok";
 			};
 			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
-				pingrp = "ciplus_pins";
+				abilis,function = "ciplus";
 			};
 			pctl_mcard: pctl-mcard {       /* M-Card interface */
-				pingrp = "mcard_pins";
+				abilis,function = "mcard";
 			};
 			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
-				pingrp = "stc0_pins";
+				abilis,function = "stc0";
 			};
 			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
-				pingrp = "stc1_pins";
+				abilis,function = "stc1";
 			};
 			/* Port 6 */
 			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
-				pingrp = "mop_pins";
+				abilis,function = "mop";
 			};
 			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
-				pingrp = "mos0_pins";
+				abilis,function = "mos0";
 			};
 			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
-				pingrp = "mos1_pins";
+				abilis,function = "mos1";
 			};
 			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
-				pingrp = "mos2_pins";
+				abilis,function = "mos2";
 			};
 			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
-				pingrp = "mos3_pins";
+				abilis,function = "mos3";
 			};
 			/* Port 7 */
 			pctl_uart0: pctl-uart0 {       /* UART 0 */
-				pingrp = "uart0_pins";
+				abilis,function = "uart0";
 			};
 			pctl_uart1: pctl-uart1 {       /* UART 1 */
-				pingrp = "uart1_pins";
+				abilis,function = "uart1";
 			};
 			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
-				pingrp = "gpiol_pins";
+				abilis,function = "gpiol";
 			};
 			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
-				pingrp = "gpiom_pins";
+				abilis,function = "gpiom";
 			};
 			/* Port 8 */
 			pctl_spi3: pctl-spi3 {
-				pingrp = "spi3_pins";
+				abilis,function = "spi3";
 			};
 			pctl_jtag: pctl-jtag {
-				pingrp = "jtag_pins";
+				abilis,function = "jtag";
 			};
 			/* Port 9 */
 			pctl_spi1: pctl-spi1 {
-				pingrp = "spi1_pins";
+				abilis,function = "spi1";
 			};
 			pctl_gpio_n: pctl-gpio-n {
-				pingrp = "gpion_pins";
+				abilis,function = "gpion";
 			};
 			/* Unmuxed GPIOs */
 			pctl_gpio_b: pctl-gpio-b {
-				pingrp = "gpiob_pins";
+				abilis,function = "gpiob";
 			};
 			pctl_gpio_d: pctl-gpio-d {
-				pingrp = "gpiod_pins";
+				abilis,function = "gpiod";
 			};
 			pctl_gpio_f: pctl-gpio-f {
-				pingrp = "gpiof_pins";
+				abilis,function = "gpiof";
 			};
 			pctl_gpio_h: pctl-gpio-h {
-				pingrp = "gpioh_pins";
+				abilis,function = "gpioh";
 			};
 			pctl_gpio_i: pctl-gpio-i {
-				pingrp = "gpioi_pins";
+				abilis,function = "gpioi";
 			};
 		};
 
@@ -181,9 +181,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF140000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <0>;
-			gpio-pins = <&pctl_gpio_a>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
 		};
 		gpiob: gpio@FF141000 {
 			compatible = "abilis,tb10x-gpio";
@@ -193,9 +194,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF141000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <3>;
-			gpio-pins = <&pctl_gpio_b>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
 		};
 		gpioc: gpio@FF142000 {
 			compatible = "abilis,tb10x-gpio";
@@ -205,9 +207,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF142000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <5>;
-			gpio-pins = <&pctl_gpio_c>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
 		};
 		gpiod: gpio@FF143000 {
 			compatible = "abilis,tb10x-gpio";
@@ -217,9 +220,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF143000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <8>;
-			gpio-pins = <&pctl_gpio_d>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
 		};
 		gpioe: gpio@FF144000 {
 			compatible = "abilis,tb10x-gpio";
@@ -229,9 +233,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF144000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <10>;
-			gpio-pins = <&pctl_gpio_e>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
 		};
 		gpiof: gpio@FF145000 {
 			compatible = "abilis,tb10x-gpio";
@@ -241,9 +246,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF145000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <13>;
-			gpio-pins = <&pctl_gpio_f>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
 		};
 		gpiog: gpio@FF146000 {
 			compatible = "abilis,tb10x-gpio";
@@ -253,9 +259,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF146000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <15>;
-			gpio-pins = <&pctl_gpio_g>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
 		};
 		gpioh: gpio@FF147000 {
 			compatible = "abilis,tb10x-gpio";
@@ -265,9 +272,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF147000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <18>;
-			gpio-pins = <&pctl_gpio_h>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
 		};
 		gpioi: gpio@FF148000 {
 			compatible = "abilis,tb10x-gpio";
@@ -277,9 +285,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF148000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <20>;
-			gpio-pins = <&pctl_gpio_i>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
 		};
 		gpioj: gpio@FF149000 {
 			compatible = "abilis,tb10x-gpio";
@@ -289,9 +298,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF149000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <32>;
-			gpio-pins = <&pctl_gpio_j>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
 		};
 		gpiok: gpio@FF14a000 {
 			compatible = "abilis,tb10x-gpio";
@@ -301,9 +311,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14A000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <64>;
-			gpio-pins = <&pctl_gpio_k>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
 		};
 		gpiol: gpio@FF14b000 {
 			compatible = "abilis,tb10x-gpio";
@@ -313,9 +324,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14B000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <86>;
-			gpio-pins = <&pctl_gpio_l>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
 		};
 		gpiom: gpio@FF14c000 {
 			compatible = "abilis,tb10x-gpio";
@@ -325,9 +337,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14C000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <90>;
-			gpio-pins = <&pctl_gpio_m>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
 		};
 		gpion: gpio@FF14d000 {
 			compatible = "abilis,tb10x-gpio";
@@ -337,9 +350,10 @@
 			interrupts = <27 2>;
 			reg = <0xFF14D000 0x1000>;
 			gpio-controller;
-			#gpio-cells = <1>;
-			gpio-base  = <94>;
-			gpio-pins = <&pctl_gpio_n>;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
 		};
 	};
 };

arch/arc/boot/dts/abilis_tb101_dvk.dts

@@ -64,62 +64,62 @@
 			compatible = "gpio-leds";
 			power {
 				label = "Power";
-				gpios = <&gpioi 0>;
+				gpios = <&gpioi 0 0>;
 				linux,default-trigger = "default-on";
 			};
 			heartbeat {
 				label = "Heartbeat";
-				gpios = <&gpioi 1>;
+				gpios = <&gpioi 1 0>;
 				linux,default-trigger = "heartbeat";
 			};
 			led2 {
 				label = "LED2";
-				gpios = <&gpioi 2>;
+				gpios = <&gpioi 2 0>;
 				default-state = "off";
 			};
 			led3 {
 				label = "LED3";
-				gpios = <&gpioi 3>;
+				gpios = <&gpioi 3 0>;
 				default-state = "off";
 			};
 			led4 {
 				label = "LED4";
-				gpios = <&gpioi 4>;
+				gpios = <&gpioi 4 0>;
 				default-state = "off";
 			};
 			led5 {
 				label = "LED5";
-				gpios = <&gpioi 5>;
+				gpios = <&gpioi 5 0>;
 				default-state = "off";
 			};
 			led6 {
 				label = "LED6";
-				gpios = <&gpioi 6>;
+				gpios = <&gpioi 6 0>;
 				default-state = "off";
 			};
 			led7 {
 				label = "LED7";
-				gpios = <&gpioi 7>;
+				gpios = <&gpioi 7 0>;
 				default-state = "off";
 			};
 			led8 {
 				label = "LED8";
-				gpios = <&gpioi 8>;
+				gpios = <&gpioi 8 0>;
 				default-state = "off";
 			};
 			led9 {
 				label = "LED9";
-				gpios = <&gpioi 9>;
+				gpios = <&gpioi 9 0>;
 				default-state = "off";
 			};
 			led10 {
 				label = "LED10";
-				gpios = <&gpioi 10>;
+				gpios = <&gpioi 10 0>;
 				default-state = "off";
 			};
 			led11 {
 				label = "LED11";
-				gpios = <&gpioi 11>;
+				gpios = <&gpioi 11 0>;
 				default-state = "off";
 			};
 		};

arch/arc/boot/dts/abilis_tb10x.dtsi

@@ -62,9 +62,8 @@
 		};
 
 		iomux: iomux@FF10601c {
-			#address-cells = <1>;
-			#size-cells = <1>;
 			compatible = "abilis,tb10x-iomux";
+			#gpio-range-cells = <3>;
 			reg = <0xFF10601c 0x4>;
 		};
 

arch/arc/boot/dts/angel4.dts

@@ -67,5 +67,9 @@
 				reg = <1>;
 			};
 		};
+
+		arcpmu0: pmu {
+			compatible = "snps,arc700-pmu";
+		};
 	};
 };

arch/arc/configs/fpga_noramfs_defconfig

@@ -0,0 +1,64 @@
+CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_FPGA_LEGACY=y
+CONFIG_ARC_BOARD_ML509=y
+# CONFIG_ARC_HAS_RTSC is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_ARC_EMAC=y
+CONFIG_LXT_PHY=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_XZ_DEC=y

arch/arc/include/asm/perf_event.h

@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ * Linux performance counter support for ARC
+ *
+ * Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -10,4 +12,204 @@
 #ifndef __ASM_PERF_EVENT_H
 #define __ASM_PERF_EVENT_H
 
+/* real maximum varies per CPU, this is the maximum supported by the driver */
+#define ARC_PMU_MAX_HWEVENTS	64
+
+#define ARC_REG_CC_BUILD	0xF6
+#define ARC_REG_CC_INDEX	0x240
+#define ARC_REG_CC_NAME0	0x241
+#define ARC_REG_CC_NAME1	0x242
+
+#define ARC_REG_PCT_BUILD	0xF5
+#define ARC_REG_PCT_COUNTL	0x250
+#define ARC_REG_PCT_COUNTH	0x251
+#define ARC_REG_PCT_SNAPL	0x252
+#define ARC_REG_PCT_SNAPH	0x253
+#define ARC_REG_PCT_CONFIG	0x254
+#define ARC_REG_PCT_CONTROL	0x255
+#define ARC_REG_PCT_INDEX	0x256
+
+#define ARC_REG_PCT_CONTROL_CC	(1 << 16)	/* clear counts */
+#define ARC_REG_PCT_CONTROL_SN	(1 << 17)	/* snapshot */
+
+struct arc_reg_pct_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int m:8, c:8, r:6, s:2, v:8;
+#else
+	unsigned int v:8, s:2, r:6, c:8, m:8;
+#endif
+};
+
+struct arc_reg_cc_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int c:16, r:8, v:8;
+#else
+	unsigned int v:8, r:8, c:16;
+#endif
+};
+
+#define PERF_COUNT_ARC_DCLM	(PERF_COUNT_HW_MAX + 0)
+#define PERF_COUNT_ARC_DCSM	(PERF_COUNT_HW_MAX + 1)
+#define PERF_COUNT_ARC_ICM	(PERF_COUNT_HW_MAX + 2)
+#define PERF_COUNT_ARC_BPOK	(PERF_COUNT_HW_MAX + 3)
+#define PERF_COUNT_ARC_EDTLB	(PERF_COUNT_HW_MAX + 4)
+#define PERF_COUNT_ARC_EITLB	(PERF_COUNT_HW_MAX + 5)
+#define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 6)
+
+/*
+ * The "generalized" performance events seem to really be a copy
+ * of the available events on x86 processors; the mapping to ARC
+ * events is not always possible 1-to-1. Fortunately, there doesn't
+ * seem to be an exact definition for these events, so we can cheat
+ * a bit where necessary.
+ *
+ * In particular, the following PERF events may behave a bit differently
+ * compared to other architectures:
+ *
+ * PERF_COUNT_HW_CPU_CYCLES
+ *	Cycles not in halted state
+ *
+ * PERF_COUNT_HW_REF_CPU_CYCLES
+ *	Reference cycles not in halted state, same as PERF_COUNT_HW_CPU_CYCLES
+ *	for now as we don't do Dynamic Voltage/Frequency Scaling (yet)
+ *
+ * PERF_COUNT_HW_BUS_CYCLES
+ *	Unclear what this means, Intel uses 0x013c, which according to
+ *	their datasheet means "unhalted reference cycles". It sounds similar
+ *	to PERF_COUNT_HW_REF_CPU_CYCLES, and we use the same counter for it.
+ *
+ * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
+ * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
+ *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
+ *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
+ *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
+ *	STALLED_CYCLES_FRONTEND.
+ *
+ *	We could start multiple performance counters and combine everything
+ *	afterwards, but that makes it complicated.
+ *
+ *	Note that I$ cache misses aren't counted by either of the two!
+ */
+
+static const char * const arc_pmu_ev_hw_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
+	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail",
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp",
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
+	[PERF_COUNT_ARC_DCLM] = "dclm",
+	[PERF_COUNT_ARC_DCSM] = "dcsm",
+	[PERF_COUNT_ARC_ICM] = "icm",
+	[PERF_COUNT_ARC_BPOK] = "bpok",
+	[PERF_COUNT_ARC_EDTLB] = "edtlb",
+	[PERF_COUNT_ARC_EITLB] = "eitlb",
+};
+
+#define C(_x)			PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED	0xffff
+
+static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
 #endif /* __ASM_PERF_EVENT_H */