Merge tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux into next/dt

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.20, please pull the following:

- Rafal updates the Broadcom BCM5301x (Northstar) DTS files to use the
  new style partition parser and removes the unsupported/undocumented
  linux,part-probe properties that were previously introduced

- Stefan adds supports for the Raspberry Pi Compute Module 3/3Lite, he
  also updates the Raspberry Pi 3B+ USB Ethernet adapter to have proper
  LED configuration

- Rob fixes a bunch of SPI bus warnings in the Northstar Plus and
  Hurricane 2 DTS files

- Florian documents the Broadcom roboswitch Switch Register Access Block
  (SRAB) interrupts, adds the switch interrupts to the Northstar Plus
  DTS include file and finally updates the BCM958625HR reference board to
  have the proper SFP module definition

* tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm: Fix SPI bus warnings
  ARM: dts: NSP: Wire up switch interrupts
  dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
  ARM: dts: NSP: Enable SFP on bcm958625hr
  ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs
  ARM: dts: BCM5301X: Specify flash partitions
  ARM: dts: add Raspberry Pi Compute Module 3 and IO board
  dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -42,6 +42,14 @@ Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";
 
+Raspberry Pi Compute Module 3
+Required root node properties:
+compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+
+Raspberry Pi Compute Module 3 Lite
+Required root node properties:
+compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
+
 Raspberry Pi Zero
 Required root node properties:
 compatible = "raspberrypi,model-zero", "brcm,bcm2835";

Documentation/devicetree/bindings/net/dsa/b53.txt

@@ -46,6 +46,42 @@ Required properties:
       "brcm,bcm6328-switch"
       "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
 
+Required properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg: a total of 3 register base addresses, the first one must be the
+   Switch Register Access block base, the second is the port 5/4 mux
+   configuration register and the third one is the SGMII configuration
+   and status register base address.
+
+ - interrupts: a total of 13 interrupts must be specified, in the following
+   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
+   then the timestamping interrupt and the sleep timer interrupts for ports
+   5,7,8.
+
+Optional properties for BCM585xx/586xx/88312 SoCs:
+
+  - reg-names: a total of 3 names matching the 3 base register address, must
+    be in the following order:
+	"srab"
+	"mux_config"
+	"sgmii_config"
+
+  - interrupt-names: a total of 13 names matching the 13 interrupts specified
+    must be in the following order:
+	"link_state_p0"
+	"link_state_p1"
+	"link_state_p2"
+	"link_state_p3"
+	"link_state_p4"
+	"link_state_p5"
+	"link_state_p7"
+	"link_state_p8"
+	"phy"
+	"ts"
+	"imp_sleep_timer_p5"
+	"imp_sleep_timer_p7"
+	"imp_sleep_timer_p8"
+
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
 

arch/arm/boot/dts/Makefile

@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2836-rpi-2-b.dtb \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \

arch/arm/boot/dts/bcm-hr2.dtsi

@@ -216,7 +216,7 @@
 			reg = <0x33000 0x14>;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -273,7 +273,7 @@
 			brcm,nand-has-wp;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
@@ -377,7 +377,36 @@
 
 		srab: srab@36000 {
 			compatible = "brcm,nsp-srab";
-			reg = <0x36000 0x1000>;
+			reg = <0x36000 0x1000>,
+			      <0x3f308 0x8>,
+			      <0x3f410 0xc>;
+			reg-names = "srab", "mux_config", "sgmii";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "link_state_p0",
+					  "link_state_p1",
+					  "link_state_p2",
+					  "link_state_p3",
+					  "link_state_p4",
+					  "link_state_p5",
+					  "link_state_p7",
+					  "link_state_p8",
+					  "phy",
+					  "ts",
+					  "imp_sleep_timer_p5",
+					  "imp_sleep_timer_p7",
+					  "imp_sleep_timer_p8";
 			#address-cells = <1>;
 			#size-cells = <0>;
 

arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts

@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "GPIO46",
+			  "GPIO47",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};

arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};

arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi

@@ -1,4 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
 / {
 	aliases {
 		ethernet0 = &ethernet;
@@ -21,6 +23,18 @@
 			ethernet: ethernet@1 {
 				compatible = "usb424,7800";
 				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
 			};
 		};
 	};

arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts

@@ -94,6 +94,34 @@
 
 &spi_nor {
 	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x000000 0x040000>;
+			read-only;
+		};
+
+		os-image@100000 {
+			label = "os-image";
+			reg = <0x040000 0x200000>;
+			compatible = "brcm,trx";
+		};
+
+		rootfs@240000 {
+			label = "rootfs";
+			reg = <0x240000 0xc00000>;
+		};
+
+		nvram@ff0000 {
+			label = "nvram";
+			reg = <0xff0000 0x010000>;
+		};
+	};
 };
 
 &usb2 {

arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts

@@ -66,3 +66,34 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		nvram@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		firmware@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07cc0000>;
+			compatible = "brcm,trx";
+		};
+
+		asus@7ec0000 {
+			label = "asus";
+			reg = <0x07ec0000 0x00140000>;
+			read-only;
+		};
+	};
+};

arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts

@@ -103,6 +103,34 @@
 
 &spi_nor {
 	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x000000 0x040000>;
+			read-only;
+		};
+
+		os-image@100000 {
+			label = "os-image";
+			reg = <0x040000 0x200000>;
+			compatible = "brcm,trx";
+		};
+
+		rootfs@240000 {
+			label = "rootfs";
+			reg = <0x240000 0xc00000>;
+		};
+
+		nvram@ff0000 {
+			label = "nvram";
+			reg = <0xff0000 0x010000>;
+		};
+	};
 };
 
 &usb3_phy {

arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi

@@ -12,6 +12,10 @@
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
 		};
 	};
 };

arch/arm/boot/dts/bcm5301x.dtsi

@@ -475,8 +475,11 @@
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
-			linux,part-probe = "ofpart", "bcm47xxpart";
 			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
 		};
 	};
 

arch/arm/boot/dts/bcm958625hr.dts

@@ -58,6 +58,24 @@
 		open-source;
 		priority = <200>;
 	};
+
+	/* Hardware I2C block cannot do more than 63 bytes per transfer,
+	 * which would prevent reading from a SFP's EEPROM (256 byte).
+	 */
+	i2c1: i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &amac0 {
@@ -210,6 +228,14 @@
 			reg = <4>;
 		};
 
+		port@5 {
+			label = "sfp";
+			phy-mode = "sgmii";
+			reg = <5>;
+			sfp = <&sfp>;
+			managed = "in-band-status";
+		};
+
 		port@8 {
 			ethernet = <&amac2>;
 			label = "cpu";