Merge tag 'usb-serial-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v4.7-rc1

These updates fixes a number of issues where resources were not properly
released on probe errors. Included is also a fix for hardware
flow-control disable for cp210x.

Support for Moxa UPort 11x0 is added to the ti_usb_3410_5052 driver, and
included are also some general code clean ups.

Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/cp210x.c

@@ -331,6 +331,42 @@ struct cp210x_comm_status {
  */
 #define PURGE_ALL		0x000f
 
+/* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
+struct cp210x_flow_ctl {
+	__le32	ulControlHandshake;
+	__le32	ulFlowReplace;
+	__le32	ulXonLimit;
+	__le32	ulXoffLimit;
+} __packed;
+
+/* cp210x_flow_ctl::ulControlHandshake */
+#define CP210X_SERIAL_DTR_MASK		GENMASK(1, 0)
+#define CP210X_SERIAL_DTR_SHIFT(_mode)	(_mode)
+#define CP210X_SERIAL_CTS_HANDSHAKE	BIT(3)
+#define CP210X_SERIAL_DSR_HANDSHAKE	BIT(4)
+#define CP210X_SERIAL_DCD_HANDSHAKE	BIT(5)
+#define CP210X_SERIAL_DSR_SENSITIVITY	BIT(6)
+
+/* values for cp210x_flow_ctl::ulControlHandshake::CP210X_SERIAL_DTR_MASK */
+#define CP210X_SERIAL_DTR_INACTIVE	0
+#define CP210X_SERIAL_DTR_ACTIVE	1
+#define CP210X_SERIAL_DTR_FLOW_CTL	2
+
+/* cp210x_flow_ctl::ulFlowReplace */
+#define CP210X_SERIAL_AUTO_TRANSMIT	BIT(0)
+#define CP210X_SERIAL_AUTO_RECEIVE	BIT(1)
+#define CP210X_SERIAL_ERROR_CHAR	BIT(2)
+#define CP210X_SERIAL_NULL_STRIPPING	BIT(3)
+#define CP210X_SERIAL_BREAK_CHAR	BIT(4)
+#define CP210X_SERIAL_RTS_MASK		GENMASK(7, 6)
+#define CP210X_SERIAL_RTS_SHIFT(_mode)	(_mode << 6)
+#define CP210X_SERIAL_XOFF_CONTINUE	BIT(31)
+
+/* values for cp210x_flow_ctl::ulFlowReplace::CP210X_SERIAL_RTS_MASK */
+#define CP210X_SERIAL_RTS_INACTIVE	0
+#define CP210X_SERIAL_RTS_ACTIVE	1
+#define CP210X_SERIAL_RTS_FLOW_CTL	2
+
 /*
  * Reads a variable-sized block of CP210X_ registers, identified by req.
  * Returns data into buf in native USB byte order.
@@ -698,9 +734,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 {
 	struct device *dev = &port->dev;
 	unsigned int cflag;
-	u8 modem_ctl[16];
+	struct cp210x_flow_ctl flow_ctl;
 	u32 baud;
 	u16 bits;
+	u32 ctl_hs;
 
 	cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
 
@@ -796,9 +833,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 		break;
 	}
 
-	cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
-			sizeof(modem_ctl));
-	if (modem_ctl[0] & 0x08) {
+	cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+			sizeof(flow_ctl));
+	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+	if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
 		dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
 		cflag |= CRTSCTS;
 	} else {
@@ -867,7 +905,6 @@ static void cp210x_set_termios(struct tty_struct *tty,
 	struct device *dev = &port->dev;
 	unsigned int cflag, old_cflag;
 	u16 bits;
-	u8 modem_ctl[16];
 
 	cflag = tty->termios.c_cflag;
 	old_cflag = old_termios->c_cflag;
@@ -951,35 +988,44 @@ static void cp210x_set_termios(struct tty_struct *tty,
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
-
-		/* Only bytes 0, 4 and 7 out of first 8 have functional bits */
-
-		cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
-				sizeof(modem_ctl));
-		dev_dbg(dev, "%s - read modem controls = %02x .. .. .. %02x .. .. %02x\n",
-			__func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
-
+		struct cp210x_flow_ctl flow_ctl;
+		u32 ctl_hs;
+		u32 flow_repl;
+
+		cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+				sizeof(flow_ctl));
+		ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+		flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+		dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
+				__func__, ctl_hs, flow_repl);
+
+		ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
+		ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
+		ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
+		ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
+		ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
 		if (cflag & CRTSCTS) {
-			modem_ctl[0] &= ~0x7B;
-			modem_ctl[0] |= 0x09;
-			modem_ctl[4] = 0x80;
-			/* FIXME - why clear reserved bits just read? */
-			modem_ctl[5] = 0;
-			modem_ctl[6] = 0;
-			modem_ctl[7] = 0;
+			ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
+
+			flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+			flow_repl |= CP210X_SERIAL_RTS_SHIFT(
+					CP210X_SERIAL_RTS_FLOW_CTL);
 			dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
 		} else {
-			modem_ctl[0] &= ~0x7B;
-			modem_ctl[0] |= 0x01;
-			/* FIXME - OR here instead of assignment looks wrong */
-			modem_ctl[4] |= 0x40;
+			ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
+
+			flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+			flow_repl |= CP210X_SERIAL_RTS_SHIFT(
+					CP210X_SERIAL_RTS_ACTIVE);
 			dev_dbg(dev, "%s - flow control = NONE\n", __func__);
 		}
 
-		dev_dbg(dev, "%s - write modem controls = %02x .. .. .. %02x .. .. %02x\n",
-			__func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
-		cp210x_write_reg_block(port, CP210X_SET_FLOW, modem_ctl,
-				sizeof(modem_ctl));
+		dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
+				__func__, ctl_hs, flow_repl);
+		flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
+		flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+		cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+				sizeof(flow_ctl));
 	}
 
 }

drivers/usb/serial/ftdi_sio.c

@@ -93,27 +93,27 @@ static int   ftdi_8u2232c_probe(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
-static struct ftdi_sio_quirk ftdi_jtag_quirk = {
+static const struct ftdi_sio_quirk ftdi_jtag_quirk = {
 	.probe	= ftdi_jtag_probe,
 };
 
-static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
 	.probe	= ftdi_NDI_device_setup,
 };
 
-static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
+static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
 	.port_probe = ftdi_USB_UIRT_setup,
 };
 
-static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 	.port_probe = ftdi_HE_TIRA1_setup,
 };
 
-static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+static const struct ftdi_sio_quirk ftdi_stmclite_quirk = {
 	.probe	= ftdi_stmclite_probe,
 };
 
-static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
+static const struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
 	.probe	= ftdi_8u2232c_probe,
 };
 
@@ -1775,7 +1775,7 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 static int ftdi_sio_probe(struct usb_serial *serial,
 					const struct usb_device_id *id)
 {
-	struct ftdi_sio_quirk *quirk =
+	const struct ftdi_sio_quirk *quirk =
 				(struct ftdi_sio_quirk *)id->driver_info;
 
 	if (quirk && quirk->probe) {
@@ -1792,7 +1792,7 @@ static int ftdi_sio_probe(struct usb_serial *serial,
 static int ftdi_sio_port_probe(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv;
-	struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
+	const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
 
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);

drivers/usb/serial/io_edgeport.c

@@ -2849,14 +2849,16 @@ static int edge_startup(struct usb_serial *serial)
 				/* not set up yet, so do it now */
 				edge_serial->interrupt_read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
-				if (!edge_serial->interrupt_read_urb)
-					return -ENOMEM;
+				if (!edge_serial->interrupt_read_urb) {
+					response = -ENOMEM;
+					break;
+				}
 
 				edge_serial->interrupt_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->interrupt_in_buffer) {
-					usb_free_urb(edge_serial->interrupt_read_urb);
-					return -ENOMEM;
+					response = -ENOMEM;
+					break;
 				}
 				edge_serial->interrupt_in_endpoint =
 						endpoint->bEndpointAddress;
@@ -2884,14 +2886,16 @@ static int edge_startup(struct usb_serial *serial)
 				/* not set up yet, so do it now */
 				edge_serial->read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
-				if (!edge_serial->read_urb)
-					return -ENOMEM;
+				if (!edge_serial->read_urb) {
+					response = -ENOMEM;
+					break;
+				}
 
 				edge_serial->bulk_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->bulk_in_buffer) {
-					usb_free_urb(edge_serial->read_urb);
-					return -ENOMEM;
+					response = -ENOMEM;
+					break;
 				}
 				edge_serial->bulk_in_endpoint =
 						endpoint->bEndpointAddress;
@@ -2917,9 +2921,22 @@ static int edge_startup(struct usb_serial *serial)
 			}
 		}
 
-		if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
-			dev_err(ddev, "Error - the proper endpoints were not found!\n");
-			return -ENODEV;
+		if (response || !interrupt_in_found || !bulk_in_found ||
+							!bulk_out_found) {
+			if (!response) {
+				dev_err(ddev, "expected endpoints not found\n");
+				response = -ENODEV;
+			}
+
+			usb_free_urb(edge_serial->interrupt_read_urb);
+			kfree(edge_serial->interrupt_in_buffer);
+
+			usb_free_urb(edge_serial->read_urb);
+			kfree(edge_serial->bulk_in_buffer);
+
+			kfree(edge_serial);
+
+			return response;
 		}
 
 		/* start interrupt read for this edgeport this interrupt will
@@ -2942,16 +2959,9 @@ static void edge_disconnect(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
-	/* stop reads and writes on all ports */
-	/* free up our endpoint stuff */
 	if (edge_serial->is_epic) {
 		usb_kill_urb(edge_serial->interrupt_read_urb);
-		usb_free_urb(edge_serial->interrupt_read_urb);
-		kfree(edge_serial->interrupt_in_buffer);
-
 		usb_kill_urb(edge_serial->read_urb);
-		usb_free_urb(edge_serial->read_urb);
-		kfree(edge_serial->bulk_in_buffer);
 	}
 }
 
@@ -2964,6 +2974,16 @@ static void edge_release(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
+	if (edge_serial->is_epic) {
+		usb_kill_urb(edge_serial->interrupt_read_urb);
+		usb_free_urb(edge_serial->interrupt_read_urb);
+		kfree(edge_serial->interrupt_in_buffer);
+
+		usb_kill_urb(edge_serial->read_urb);
+		usb_free_urb(edge_serial->read_urb);
+		kfree(edge_serial->bulk_in_buffer);
+	}
+
 	kfree(edge_serial);
 }
 

drivers/usb/serial/keyspan.c

@@ -255,7 +255,7 @@ static int keyspan_write(struct tty_struct *tty,
 			return count;
 		}
 
-		dev_dbg(&port->dev, "%s - endpoint %d flip %d\n",
+		dev_dbg(&port->dev, "%s - endpoint %x flip %d\n",
 			__func__, usb_pipeendpoint(this_urb->pipe), flip);
 
 		if (this_urb->status == -EINPROGRESS) {
@@ -300,7 +300,7 @@ static void	usa26_indat_callback(struct urb *urb)
 	endpoint = usb_pipeendpoint(urb->pipe);
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
+		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
 			__func__, status, endpoint);
 		return;
 	}
@@ -393,7 +393,8 @@ static void	usa26_instat_callback(struct urb *urb)
 	serial =  urb->context;
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
 		return;
 	}
 	if (urb->actual_length != 9) {
@@ -452,7 +453,7 @@ static void usa28_indat_callback(struct urb *urb)
 
 	do {
 		if (status) {
-			dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
+			dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
 				__func__, status, usb_pipeendpoint(urb->pipe));
 			return;
 		}
@@ -511,7 +512,8 @@ static void	usa28_instat_callback(struct urb *urb)
 	serial =  urb->context;
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
 		return;
 	}
 
@@ -591,7 +593,8 @@ static void	usa49_instat_callback(struct urb *urb)
 	serial =  urb->context;
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
 		return;
 	}
 
@@ -646,7 +649,7 @@ static void	usa49_indat_callback(struct urb *urb)
 	endpoint = usb_pipeendpoint(urb->pipe);
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
+		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
 			__func__, status, endpoint);
 		return;
 	}
@@ -698,7 +701,8 @@ static void usa49wg_indat_callback(struct urb *urb)
 	serial = urb->context;
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
 		return;
 	}
 
@@ -774,8 +778,8 @@ static void usa90_indat_callback(struct urb *urb)
 	endpoint = usb_pipeendpoint(urb->pipe);
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
-		    __func__, status, endpoint);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+			__func__, status, endpoint);
 		return;
 	}
 
@@ -847,7 +851,8 @@ static void	usa90_instat_callback(struct urb *urb)
 	serial =  urb->context;
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
 		return;
 	}
 	if (urb->actual_length < 14) {
@@ -912,7 +917,8 @@ static void	usa67_instat_callback(struct urb *urb)
 	serial = urb->context;
 
 	if (status) {
-		dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+				__func__, status);
 		return;
 	}
 
@@ -1082,12 +1088,6 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return 0;
 }
 
-static inline void stop_urb(struct urb *urb)
-{
-	if (urb && urb->status == -EINPROGRESS)
-		usb_kill_urb(urb);
-}
-
 static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
@@ -1114,10 +1114,10 @@ static void keyspan_close(struct usb_serial_port *port)
 	p_priv->out_flip = 0;
 	p_priv->in_flip = 0;
 
-	stop_urb(p_priv->inack_urb);
+	usb_kill_urb(p_priv->inack_urb);
 	for (i = 0; i < 2; i++) {
-		stop_urb(p_priv->in_urbs[i]);
-		stop_urb(p_priv->out_urbs[i]);
+		usb_kill_urb(p_priv->in_urbs[i]);
+		usb_kill_urb(p_priv->out_urbs[i]);
 	}
 }
 
@@ -1221,8 +1221,8 @@ static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *se
 		if (ep->bEndpointAddress == endpoint)
 			return ep;
 	}
-	dev_warn(&serial->interface->dev, "found no endpoint descriptor for "
-		 "endpoint %x\n", endpoint);
+	dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n",
+			endpoint);
 	return NULL;
 }
 
@@ -1237,7 +1237,8 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
 	if (endpoint == -1)
 		return NULL;		/* endpoint not needed */
 
-	dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint);
+	dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n",
+			__func__, endpoint);
 	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
 	if (!urb)
 		return NULL;
@@ -1572,7 +1573,8 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 		return -1;
 	}
 
-	dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
+	dev_dbg(&port->dev, "%s - endpoint %x\n",
+			__func__, usb_pipeendpoint(this_urb->pipe));
 
 	/* Save reset port val for resend.
 	   Don't overwrite resend for open/close condition. */
@@ -1838,7 +1840,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 		return -1;
 	}
 
-	dev_dbg(&port->dev, "%s - endpoint %d (%d)\n",
+	dev_dbg(&port->dev, "%s - endpoint %x (%d)\n",
 		__func__, usb_pipeendpoint(this_urb->pipe), device_port);
 
 	/* Save reset port val for resend.
@@ -2365,9 +2367,9 @@ static void keyspan_disconnect(struct usb_serial *serial)
 
 	s_priv = usb_get_serial_data(serial);
 
-	stop_urb(s_priv->instat_urb);
-	stop_urb(s_priv->glocont_urb);
-	stop_urb(s_priv->indat_urb);
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->glocont_urb);
+	usb_kill_urb(s_priv->indat_urb);
 }
 
 static void keyspan_release(struct usb_serial *serial)
@@ -2376,6 +2378,10 @@ static void keyspan_release(struct usb_serial *serial)
 
 	s_priv = usb_get_serial_data(serial);
 
+	/* Make sure to unlink the URBs submitted in attach. */
+	usb_kill_urb(s_priv->instat_urb);
+	usb_kill_urb(s_priv->indat_urb);
+
 	usb_free_urb(s_priv->instat_urb);
 	usb_free_urb(s_priv->indat_urb);
 	usb_free_urb(s_priv->glocont_urb);
@@ -2491,11 +2497,11 @@ static int keyspan_port_remove(struct usb_serial_port *port)
 
 	p_priv = usb_get_serial_port_data(port);
 
-	stop_urb(p_priv->inack_urb);
-	stop_urb(p_priv->outcont_urb);
+	usb_kill_urb(p_priv->inack_urb);
+	usb_kill_urb(p_priv->outcont_urb);
 	for (i = 0; i < 2; i++) {
-		stop_urb(p_priv->in_urbs[i]);
-		stop_urb(p_priv->out_urbs[i]);
+		usb_kill_urb(p_priv->in_urbs[i]);
+		usb_kill_urb(p_priv->out_urbs[i]);
 	}
 
 	usb_free_urb(p_priv->inack_urb);

drivers/usb/serial/mxuport.c

@@ -1259,6 +1259,15 @@ static int mxuport_attach(struct usb_serial *serial)
 	return 0;
 }
 
+static void mxuport_release(struct usb_serial *serial)
+{
+	struct usb_serial_port *port0 = serial->port[0];
+	struct usb_serial_port *port1 = serial->port[1];
+
+	usb_serial_generic_close(port1);
+	usb_serial_generic_close(port0);
+}
+
 static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct mxuport_port *mxport = usb_get_serial_port_data(port);
@@ -1361,6 +1370,7 @@ static struct usb_serial_driver mxuport_device = {
 	.probe			= mxuport_probe,
 	.port_probe		= mxuport_port_probe,
 	.attach			= mxuport_attach,
+	.release		= mxuport_release,
 	.calc_num_ports		= mxuport_calc_num_ports,
 	.open			= mxuport_open,
 	.close			= mxuport_close,

drivers/usb/serial/quatech2.c

@@ -141,6 +141,7 @@ static void qt2_release(struct usb_serial *serial)
 
 	serial_priv = usb_get_serial_data(serial);
 
+	usb_kill_urb(serial_priv->read_urb);
 	usb_free_urb(serial_priv->read_urb);
 	kfree(serial_priv->read_buffer);
 	kfree(serial_priv);

drivers/usb/serial/ti_usb_3410_5052.c

@@ -80,6 +80,7 @@ struct ti_device {
 	int			td_open_port_count;
 	struct usb_serial	*td_serial;
 	int			td_is_3410;
+	bool			td_rs485_only;
 	int			td_urb_error;
 };
 
@@ -160,6 +161,11 @@ static const struct usb_device_id ti_id_table_3410[] = {
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 	{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
 	{ }	/* terminator */
 };
 
@@ -193,6 +199,11 @@ static const struct usb_device_id ti_id_table_combined[] = {
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 	{ USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
+	{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
 	{ }	/* terminator */
 };
 
@@ -277,6 +288,11 @@ MODULE_FIRMWARE("mts_gsm.fw");
 MODULE_FIRMWARE("mts_edge.fw");
 MODULE_FIRMWARE("mts_mt9234mu.fw");
 MODULE_FIRMWARE("mts_mt9234zba.fw");
+MODULE_FIRMWARE("moxa/moxa-1110.fw");
+MODULE_FIRMWARE("moxa/moxa-1130.fw");
+MODULE_FIRMWARE("moxa/moxa-1131.fw");
+MODULE_FIRMWARE("moxa/moxa-1150.fw");
+MODULE_FIRMWARE("moxa/moxa-1151.fw");
 
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait,
@@ -292,6 +308,9 @@ static int ti_startup(struct usb_serial *serial)
 {
 	struct ti_device *tdev;
 	struct usb_device *dev = serial->dev;
+	struct usb_host_interface *cur_altsetting;
+	int num_endpoints;
+	u16 vid, pid;
 	int status;
 
 	dev_dbg(&dev->dev,
@@ -315,8 +334,22 @@ static int ti_startup(struct usb_serial *serial)
 	dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
 		tdev->td_is_3410 ? "3410" : "5052");
 
-	/* if we have only 1 configuration, download firmware */
-	if (dev->descriptor.bNumConfigurations == 1) {
+	vid = le16_to_cpu(dev->descriptor.idVendor);
+	pid = le16_to_cpu(dev->descriptor.idProduct);
+	if (vid == MXU1_VENDOR_ID) {
+		switch (pid) {
+		case MXU1_1130_PRODUCT_ID:
+		case MXU1_1131_PRODUCT_ID:
+			tdev->td_rs485_only = true;
+			break;
+		}
+	}
+
+	cur_altsetting = serial->interface->cur_altsetting;
+	num_endpoints = cur_altsetting->desc.bNumEndpoints;
+
+	/* if we have only 1 configuration and 1 endpoint, download firmware */
+	if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
 		status = ti_download_firmware(tdev);
 
 		if (status != 0)
@@ -371,7 +404,11 @@ static int ti_port_probe(struct usb_serial_port *port)
 	port->port.closing_wait = msecs_to_jiffies(10 * closing_wait);
 	tport->tp_port = port;
 	tport->tp_tdev = usb_get_serial_data(port->serial);
-	tport->tp_uart_mode = 0;	/* default is RS232 */
+
+	if (tport->tp_tdev->td_rs485_only)
+		tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
+	else
+		tport->tp_uart_mode = TI_UART_232;
 
 	usb_set_serial_port_data(port, tport);
 
@@ -1450,6 +1487,16 @@ static int ti_download_firmware(struct ti_device *tdev)
 	const struct firmware *fw_p;
 	char buf[32];
 
+	if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
+		snprintf(buf,
+			sizeof(buf),
+			"moxa/moxa-%04x.fw",
+			le16_to_cpu(dev->descriptor.idProduct));
+
+		status = request_firmware(&fw_p, buf, &dev->dev);
+		goto check_firmware;
+	}
+
 	/* try ID specific firmware first, then try generic firmware */
 	sprintf(buf, "ti_usb-v%04x-p%04x.fw",
 			le16_to_cpu(dev->descriptor.idVendor),
@@ -1487,6 +1534,8 @@ static int ti_download_firmware(struct ti_device *tdev)
 		}
 		status = request_firmware(&fw_p, buf, &dev->dev);
 	}
+
+check_firmware:
 	if (status) {
 		dev_err(&dev->dev, "%s - firmware not found\n", __func__);
 		return -ENOENT;

drivers/usb/serial/ti_usb_3410_5052.h

@@ -60,6 +60,14 @@
 #define HONEYWELL_VENDOR_ID		0x10ac
 #define HONEYWELL_HGI80_PRODUCT_ID	0x0102  /* Honeywell HGI80 */
 
+/* Moxa UPORT 11x0 vendor and product IDs */
+#define MXU1_VENDOR_ID				0x110a
+#define MXU1_1110_PRODUCT_ID			0x1110
+#define MXU1_1130_PRODUCT_ID			0x1130
+#define MXU1_1131_PRODUCT_ID			0x1131
+#define MXU1_1150_PRODUCT_ID			0x1150
+#define MXU1_1151_PRODUCT_ID			0x1151
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02

drivers/usb/serial/usb-serial.c

@@ -96,7 +96,8 @@ static int allocate_minors(struct usb_serial *serial, int num_ports)
 	mutex_lock(&table_lock);
 	for (i = 0; i < num_ports; ++i) {
 		port = serial->port[i];
-		minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL);
+		minor = idr_alloc(&serial_minors, port, 0,
+					USB_SERIAL_TTY_MINORS, GFP_KERNEL);
 		if (minor < 0)
 			goto error;
 		port->minor = minor;
@@ -815,7 +816,7 @@ static int usb_serial_probe(struct usb_interface *interface,
 		}
 	}
 
-#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
+#if IS_ENABLED(CONFIG_USB_SERIAL_PL2303)
 	/* BEGIN HORRIBLE HACK FOR PL2303 */
 	/* this is needed due to the looney way its endpoints are set up */
 	if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&