staging: dgnc: digi.h Comment style modifications

Make modifications to comment style

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgnc/digi.h

@@ -17,16 +17,16 @@
 #define __DIGI_H
 
 #ifndef TIOCM_LE
-#define		TIOCM_LE	0x01		/* line enable		*/
-#define		TIOCM_DTR	0x02		/* data terminal ready	*/
-#define		TIOCM_RTS	0x04		/* request to send	*/
-#define		TIOCM_ST	0x08		/* secondary transmit	*/
-#define		TIOCM_SR	0x10		/* secondary receive	*/
-#define		TIOCM_CTS	0x20		/* clear to send	*/
-#define		TIOCM_CAR	0x40		/* carrier detect	*/
-#define		TIOCM_RNG	0x80		/* ring	indicator	*/
-#define		TIOCM_DSR	0x100		/* data set ready	*/
-#define		TIOCM_RI	TIOCM_RNG	/* ring (alternate)	*/
+#define		TIOCM_LE	0x01		/* line enable */
+#define		TIOCM_DTR	0x02		/* data terminal ready */
+#define		TIOCM_RTS	0x04		/* request to send */
+#define		TIOCM_ST	0x08		/* secondary transmit */
+#define		TIOCM_SR	0x10		/* secondary receive */
+#define		TIOCM_CTS	0x20		/* clear to send */
+#define		TIOCM_CAR	0x40		/* carrier detect */
+#define		TIOCM_RNG	0x80		/* ring	indicator */
+#define		TIOCM_DSR	0x100		/* data set ready */
+#define		TIOCM_RI	TIOCM_RNG	/* ring (alternate) */
 #define		TIOCM_CD	TIOCM_CAR	/* carrier detect (alt)	*/
 #endif
 
@@ -40,72 +40,71 @@
 #define	TIOCMBIS	(('d' << 8) | 255)	/* set modem ctrl state */
 #endif
 
-#define DIGI_GETA	(('e' << 8) | 94)	/* Read params		*/
-#define DIGI_SETA	(('e' << 8) | 95)	/* Set params		*/
-#define DIGI_SETAW	(('e' << 8) | 96)	/* Drain & set params	*/
+#define DIGI_GETA	(('e' << 8) | 94)	/* Read params */
+#define DIGI_SETA	(('e' << 8) | 95)	/* Set params */
+#define DIGI_SETAW	(('e' << 8) | 96)	/* Drain & set params */
 #define DIGI_SETAF	(('e' << 8) | 97)	/* Drain, flush & set params */
 #define DIGI_GET_NI_INFO (('d' << 8) | 250)	/* Non-intelligent state info */
 #define DIGI_LOOPBACK (('d' << 8) | 252)	/*
 						 * Enable/disable UART
 						 * internal loopback
 						 */
-#define DIGI_FAST	0x0002		/* Fast baud rates		*/
-#define RTSPACE		0x0004		/* RTS input flow control	*/
-#define CTSPACE		0x0008		/* CTS output flow control	*/
+#define DIGI_FAST	0x0002		/* Fast baud rates */
+#define RTSPACE		0x0004		/* RTS input flow control */
+#define CTSPACE		0x0008		/* CTS output flow control */
 #define DIGI_COOK	0x0080		/* Cooked processing done in FEP */
-#define DIGI_FORCEDCD	0x0100		/* Force carrier		*/
-#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config	*/
+#define DIGI_FORCEDCD	0x0100		/* Force carrier */
+#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config */
 #define	DIGI_PRINTER	0x0800		/* Hold port open for flow cntrl*/
-#define DIGI_DTR_TOGGLE	0x2000		/* Support DTR Toggle           */
-#define DIGI_RTS_TOGGLE	0x8000		/* Support RTS Toggle		*/
-#define DIGI_PLEN	28		/* String length		*/
-#define	DIGI_TSIZ	10		/* Terminal string len		*/
+#define DIGI_DTR_TOGGLE	0x2000		/* Support DTR Toggle */
+#define DIGI_RTS_TOGGLE	0x8000		/* Support RTS Toggle */
+#define DIGI_PLEN	28		/* String length */
+#define	DIGI_TSIZ	10		/* Terminal string len */
 
-/************************************************************************
+/*
  * Structure used with ioctl commands for DIGI parameters.
- ************************************************************************/
+ */
 struct digi_t {
-	unsigned short	digi_flags;		/* Flags (see above)	*/
-	unsigned short	digi_maxcps;		/* Max printer CPS	*/
+	unsigned short	digi_flags;		/* Flags (see above) */
+	unsigned short	digi_maxcps;		/* Max printer CPS */
 	unsigned short	digi_maxchar;		/* Max chars in print queue */
-	unsigned short	digi_bufsize;		/* Buffer size		*/
-	unsigned char	digi_onlen;		/* Length of ON string	*/
+	unsigned short	digi_bufsize;		/* Buffer size */
+	unsigned char	digi_onlen;		/* Length of ON string */
 	unsigned char	digi_offlen;		/* Length of OFF string	*/
-	char		digi_onstr[DIGI_PLEN];	/* Printer on string	*/
-	char		digi_offstr[DIGI_PLEN];	/* Printer off string	*/
-	char		digi_term[DIGI_TSIZ];	/* terminal string	*/
+	char		digi_onstr[DIGI_PLEN];	/* Printer on string */
+	char		digi_offstr[DIGI_PLEN];	/* Printer off string */
+	char		digi_term[DIGI_TSIZ];	/* terminal string */
 };
 
-/************************************************************************
- * Structure to get driver status information
- ************************************************************************/
+/* Structure to get driver status information */
+
 struct digi_dinfo {
-	unsigned int	dinfo_nboards;		/* # boards configured	*/
+	unsigned int	dinfo_nboards;		/* # boards configured */
 	char		dinfo_reserved[12];	/* for future expansion */
-	char		dinfo_version[16];	/* driver version       */
+	char		dinfo_version[16];	/* driver version */
 };
 
-#define	DIGI_GETDD	(('d' << 8) | 248)	/* get driver info      */
+#define	DIGI_GETDD	(('d' << 8) | 248)	/* get driver info */
 
-/************************************************************************
+/*
  * Structure used with ioctl commands for per-board information
  *
  * physsize and memsize differ when board has "windowed" memory
- ************************************************************************/
+ */
 struct digi_info {
-	unsigned int	info_bdnum;		/* Board number (0 based)  */
-	unsigned int	info_ioport;		/* io port address         */
-	unsigned int	info_physaddr;		/* memory address          */
+	unsigned int	info_bdnum;		/* Board number (0 based) */
+	unsigned int	info_ioport;		/* io port address */
+	unsigned int	info_physaddr;		/* memory address */
 	unsigned int	info_physsize;		/* Size of host mem window */
 	unsigned int	info_memsize;		/* Amount of dual-port mem */
-						/* on board                */
-	unsigned short	info_bdtype;		/* Board type              */
-	unsigned short	info_nports;		/* number of ports         */
-	char		info_bdstate;		/* board state             */
-	char		info_reserved[7];	/* for future expansion    */
+						/* on board */
+	unsigned short	info_bdtype;		/* Board type */
+	unsigned short	info_nports;		/* number of ports */
+	char		info_bdstate;		/* board state */
+	char		info_reserved[7];	/* for future expansion */
 };
 
-#define	DIGI_GETBD	(('d' << 8) | 249)	/* get board info          */
+#define	DIGI_GETBD	(('d' << 8) | 249)	/* get board info */
 
 struct digi_getbuffer /* Struct for holding buffer use counts */
 {