serial: sh-sci: Correct SCIF_ERROR_CLEAR for plain SCIF

SCIF_ERROR_CLEAR includes SCIFA_ORER, which exists only on SCIFA/SCIFB
and SCIF on sh7705/sh7720/sh7721.

To fix this:
  1. Remove SCIFA_ORER from the definition of SCIF_ERROR_CLEAR,
  2. During initialization, store the error clear mask to use,
     incorporating the overrun bit only if it applies to the SCxSR
     register.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sh-sci.c

@@ -84,6 +84,7 @@ struct sci_port {
 	unsigned int		overrun_reg;
 	unsigned int		overrun_mask;
 	unsigned int		error_mask;
+	unsigned int		error_clear;
 	unsigned int		sampling_rate;
 	resource_size_t		reg_size;
 
@@ -2319,15 +2320,22 @@ static int sci_init_single(struct platform_device *dev,
 	/*
 	 * Establish some sensible defaults for the error detection.
 	 */
-	sci_port->error_mask = (p->type == PORT_SCI) ?
-			SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
+	if (p->type == PORT_SCI) {
+		sci_port->error_mask = SCI_DEFAULT_ERROR_MASK;
+		sci_port->error_clear = SCI_ERROR_CLEAR;
+	} else {
+		sci_port->error_mask = SCIF_DEFAULT_ERROR_MASK;
+		sci_port->error_clear = SCIF_ERROR_CLEAR;
+	}
 
 	/*
 	 * Make the error mask inclusive of overrun detection, if
 	 * supported.
 	 */
-	if (sci_port->overrun_reg == SCxSR)
+	if (sci_port->overrun_reg == SCxSR) {
 		sci_port->error_mask |= sci_port->overrun_mask;
+		sci_port->error_clear &= ~sci_port->overrun_mask;
+	}
 
 	port->type		= p->type;
 	port->flags		= UPF_FIXED_PORT | p->flags;

drivers/tty/serial/sh-sci.h

@@ -77,7 +77,7 @@ enum {
 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
 
 #define SCIF_RDxF_CLEAR		(u32)(~(SCIF_DR | SCIF_RDF))
-#define SCIF_ERROR_CLEAR	(u32)(~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER))
+#define SCIF_ERROR_CLEAR	(u32)(~(SCIF_PER | SCIF_FER | SCIF_ER))
 #define SCIF_TDxE_CLEAR		(u32)(~(SCIF_TDFE))
 #define SCIF_BREAK_CLEAR	(u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
 
@@ -122,7 +122,7 @@ enum {
 #define SCxSR_RDxF_CLEAR(port) \
 	(((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
 #define SCxSR_ERROR_CLEAR(port) \
-	(((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR)
+	(to_sci_port(port)->error_clear)
 #define SCxSR_TDxE_CLEAR(port) \
 	(((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
 #define SCxSR_BREAK_CLEAR(port) \