Merge tag 'v3.16' into drm-next

Linux 3.16

backmerge requested by i915, nouveau and radeon authors

Conflicts:
	drivers/gpu/drm/i915/i915_gem_render_state.c
	drivers/gpu/drm/i915/intel_drv.h

.mailmap

@@ -62,6 +62,11 @@ Jeff Garzik <jgarzik@pretzel.yyz.us>
 Jens Axboe <axboe@suse.de>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
 John Stultz <johnstul@us.ibm.com>
+<josh@joshtriplett.org> <josh@freedesktop.org>
+<josh@joshtriplett.org> <josh@kernel.org>
+<josh@joshtriplett.org> <josht@linux.vnet.ibm.com>
+<josh@joshtriplett.org> <josht@us.ibm.com>
+<josh@joshtriplett.org> <josht@vnet.ibm.com>
 Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>

CREDITS

@@ -3511,10 +3511,11 @@ S: MacGregor A.C.T 2615
 S: Australia
 
 N: Josh Triplett
-E: josh@freedesktop.org
-P: 1024D/D0FE7AFB B24A 65C9 1D71 2AC2 DE87  CA26 189B 9946 D0FE 7AFB
-D: rcutorture maintainer
+E: josh@joshtriplett.org
+P: 4096R/8AFF873D 758E 5042 E397 4BA3 3A9C  1E67 0ED9 A3DF 8AFF 873D
+D: RCU and rcutorture
 D: lock annotations, finding and fixing lock bugs
+D: kernel tinification
 
 N: Winfried Trümper
 E: winni@xpilot.org

Documentation/Changes

@@ -280,12 +280,9 @@ that is possible.
 mcelog
 ------
 
-In Linux 2.6.31+ the i386 kernel needs to run the mcelog utility
-as a regular cronjob similar to the x86-64 kernel to process and log
-machine check events when CONFIG_X86_NEW_MCE is enabled. Machine check
-events are errors reported by the CPU. Processing them is strongly encouraged.
-All x86-64 kernels since 2.6.4 require the mcelog utility to
-process machine checks.
+On x86 kernels the mcelog utility is needed to process and log machine check
+events when CONFIG_X86_MCE is enabled. Machine check events are errors reported
+by the CPU. Processing them is strongly encouraged.
 
 Getting updated software
 ========================

Documentation/DocBook/gadget.tmpl

@@ -708,7 +708,7 @@ hardware level details could be very different.
 
 <para>Systems need specialized hardware support to implement OTG,
 notably including a special <emphasis>Mini-AB</emphasis> jack
-and associated transciever to support <emphasis>Dual-Role</emphasis>
+and associated transceiver to support <emphasis>Dual-Role</emphasis>
 operation:
 they can act either as a host, using the standard
 Linux-USB host side driver stack,

Documentation/DocBook/genericirq.tmpl

@@ -182,7 +182,7 @@
 	<para>
 	Each interrupt is described by an interrupt descriptor structure
 	irq_desc. The interrupt is referenced by an 'unsigned int' numeric
-	value which selects the corresponding interrupt decription structure
+	value which selects the corresponding interrupt description structure
 	in the descriptor structures array.
 	The descriptor structure contains status information and pointers
 	to the interrupt flow method and the interrupt chip structure
@@ -470,7 +470,7 @@ if (desc->irq_data.chip->irq_eoi)
      <para>
        To avoid copies of identical implementations of IRQ chips the
        core provides a configurable generic interrupt chip
-       implementation. Developers should check carefuly whether the
+       implementation. Developers should check carefully whether the
        generic chip fits their needs before implementing the same
        functionality slightly differently themselves.
      </para>

Documentation/DocBook/kernel-locking.tmpl

@@ -1760,7 +1760,7 @@ as it would be on UP.
 </para>
 
 <para>
-There is a furthur optimization possible here: remember our original
+There is a further optimization possible here: remember our original
 cache code, where there were no reference counts and the caller simply
 held the lock whenever using the object?  This is still possible: if
 you hold the lock, no one can delete the object, so you don't need to

Documentation/DocBook/libata.tmpl

@@ -677,7 +677,7 @@ and other resources, etc.
 
 	<listitem>
 	<para>
-	ATA_QCFLAG_ACTIVE is clared from qc->flags.
+	ATA_QCFLAG_ACTIVE is cleared from qc->flags.
 	</para>
 	</listitem>
 
@@ -708,7 +708,7 @@ and other resources, etc.
 
 	   <listitem>
 	   <para>
-	   qc->waiting is claread &amp; completed (in that order).
+	   qc->waiting is cleared &amp; completed (in that order).
 	   </para>
 	   </listitem>
 
@@ -1163,7 +1163,7 @@ and other resources, etc.
 
 	<para>
 	Once sense data is acquired, this type of errors can be
-	handled similary to other SCSI errors.  Note that sense data
+	handled similarly to other SCSI errors.  Note that sense data
 	may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
 	&amp;&amp; ASC/ASCQ 47h/00h SCSI PARITY ERROR).  In such
 	cases, the error should be considered as an ATA bus error and

Documentation/DocBook/media_api.tmpl

@@ -68,7 +68,7 @@
 		several digital tv standards. While it is called as DVB API,
 		in fact it covers several different video standards including
 		DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
-		to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
+		to document support also for DVB-S2, ISDB-T and ISDB-S.</para>
 	<para>The third part covers the Remote Controller API.</para>
 	<para>The fourth part covers the Media Controller API.</para>
 	<para>For additional information and for the latest development code,

Documentation/DocBook/mtdnand.tmpl

@@ -91,7 +91,7 @@
 		<listitem><para>
 	  	[MTD Interface]</para><para>
 		These functions provide the interface to the MTD kernel API. 
-		They are not replacable and provide functionality
+		They are not replaceable and provide functionality
 		which is complete hardware independent.
 		</para></listitem>
 		<listitem><para>
@@ -100,14 +100,14 @@
 		</para></listitem>
 		<listitem><para>
 	  	[GENERIC]</para><para>
-		Generic functions are not replacable and provide functionality
+		Generic functions are not replaceable and provide functionality
 		which is complete hardware independent.
 		</para></listitem>
 		<listitem><para>
 	  	[DEFAULT]</para><para>
 		Default functions provide hardware related functionality which is suitable
 		for most of the implementations. These functions can be replaced by the
-		board driver if neccecary. Those functions are called via pointers in the
+		board driver if necessary. Those functions are called via pointers in the
 		NAND chip description structure. The board driver can set the functions which
 		should be replaced by board dependent functions before calling nand_scan().
 		If the function pointer is NULL on entry to nand_scan() then the pointer
@@ -264,7 +264,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
 			is set up nand_scan() is called. This function tries to
 			detect and identify then chip. If a chip is found all the
 			internal data fields are initialized accordingly.
-			The structure(s) have to be zeroed out first and then filled with the neccecary 
+			The structure(s) have to be zeroed out first and then filled with the necessary
 			information about the device.
 		</para>
 		<programlisting>
@@ -327,7 +327,7 @@ module_init(board_init);
 	<sect1 id="Exit_function">
 		<title>Exit function</title>
 		<para>
-			The exit function is only neccecary if the driver is
+			The exit function is only necessary if the driver is
 			compiled as a module. It releases all resources which
 			are held by the chip driver and unregisters the partitions
 			in the MTD layer.
@@ -494,7 +494,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				in this case. See rts_from4.c and diskonchip.c for 
 				implementation reference. In those cases we must also
 				use bad block tables on FLASH, because the ECC layout is
-				interferring with the bad block marker positions.
+				interfering with the bad block marker positions.
 				See bad block table support for details.
 			</para>
 		</sect2>
@@ -542,7 +542,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 		<para>	
 			nand_scan() calls the function nand_default_bbt(). 
 			nand_default_bbt() selects appropriate default
-			bad block table desriptors depending on the chip information
+			bad block table descriptors depending on the chip information
 			which was retrieved by nand_scan().
 		</para>
 		<para>
@@ -554,7 +554,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 		<sect2 id="Flash_based_tables">
 			<title>Flash based tables</title>
 			<para>
-				It may be desired or neccecary to keep a bad block table in FLASH. 
+				It may be desired or necessary to keep a bad block table in FLASH.
 				For AG-AND chips this is mandatory, as they have no factory marked
 				bad blocks. They have factory marked good blocks. The marker pattern
 				is erased when the block is erased to be reused. So in case of
@@ -565,10 +565,10 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				of the blocks.
 			</para>
 			<para>
-				The blocks in which the tables are stored are procteted against
+				The blocks in which the tables are stored are protected against
 				accidental access by marking them bad in the memory bad block
 				table. The bad block table management functions are allowed
-				to circumvernt this protection.
+				to circumvent this protection.
 			</para>
 			<para>
 				The simplest way to activate the FLASH based bad block table support 
@@ -592,7 +592,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				User defined tables are created by filling out a 
 				nand_bbt_descr structure and storing the pointer in the
 				nand_chip structure member bbt_td before calling nand_scan(). 
-				If a mirror table is neccecary a second structure must be
+				If a mirror table is necessary a second structure must be
 				created and a pointer to this structure must be stored
 				in bbt_md inside the nand_chip structure. If the bbt_md 
 				member is set to NULL then only the main table is used
@@ -666,7 +666,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 				<para>
 				For automatic placement some blocks must be reserved for
 				bad block table storage. The number of reserved blocks is defined 
-				in the maxblocks member of the babd block table description structure.
+				in the maxblocks member of the bad block table description structure.
 				Reserving 4 blocks for mirrored tables should be a reasonable number. 
 				This also limits the number of blocks which are scanned for the bad
 				block table ident pattern.
@@ -1068,11 +1068,11 @@ in this page</entry>
   <chapter id="filesystems">
      	<title>Filesystem support</title>
 	<para>
-		The NAND driver provides all neccecary functions for a
+		The NAND driver provides all necessary functions for a
 		filesystem via the MTD interface.
 	</para>
 	<para>
-		Filesystems must be aware of the NAND pecularities and
+		Filesystems must be aware of the NAND peculiarities and
 		restrictions. One major restrictions of NAND Flash is, that you cannot 
 		write as often as you want to a page. The consecutive writes to a page, 
 		before erasing it again, are restricted to 1-3 writes, depending on the 
@@ -1222,7 +1222,7 @@ in this page</entry>
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none axists */
 #define NAND_BBT_CREATE		0x00000200
-/* Write bbt if neccecary */
+/* Write bbt if necessary */
 #define NAND_BBT_WRITE		0x00001000
 /* Read and write back block contents when writing bbt */
 #define NAND_BBT_SAVECONTENT	0x00002000

Documentation/DocBook/regulator.tmpl

@@ -155,7 +155,7 @@
        release regulators.  Functions are
        provided to <link linkend='API-regulator-enable'>enable</link>
        and <link linkend='API-regulator-disable'>disable</link> the
-       reguator and to get and set the runtime parameters of the
+       regulator and to get and set the runtime parameters of the
        regulator.
      </para>
      <para>

Documentation/DocBook/uio-howto.tmpl

@@ -766,10 +766,10 @@ framework to set up sysfs files for this region. Simply leave it alone.
 	<para>
 	The dynamic memory regions will be allocated when the UIO device file,
 	<varname>/dev/uioX</varname> is opened.
-	Simiar to static memory resources, the memory region information for
+	Similar to static memory resources, the memory region information for
 	dynamic regions is then visible via sysfs at
 	<varname>/sys/class/uio/uioX/maps/mapY/*</varname>.
-	The dynmaic memory regions will be freed when the UIO device file is
+	The dynamic memory regions will be freed when the UIO device file is
 	closed. When no processes are holding the device file open, the address
 	returned to userspace is ~0.
 	</para>

Documentation/DocBook/usb.tmpl

@@ -153,7 +153,7 @@
 
 	<listitem><para>The Linux USB API supports synchronous calls for
 	control and bulk messages.
-	It also supports asynchnous calls for all kinds of data transfer,
+	It also supports asynchronous calls for all kinds of data transfer,
 	using request structures called "URBs" (USB Request Blocks).
 	</para></listitem>
 

Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -5696,7 +5696,7 @@ struct _snd_pcm_runtime {
 	suspending the PCM operations via
 	<function>snd_pcm_suspend_all()</function> or
 	<function>snd_pcm_suspend()</function>.  It means that the PCM
-	streams are already stoppped when the register snapshot is
+	streams are already stopped when the register snapshot is
 	taken.  But, remember that you don't have to restart the PCM
 	stream in the resume callback. It'll be restarted via 
 	trigger call with <constant>SNDRV_PCM_TRIGGER_RESUME</constant>

Documentation/acpi/enumeration.txt

@@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and
 configuring GPIOs it can get its ACPI handle and extract this information
 from ACPI tables.
 
-Currently the kernel is not able to automatically determine from which ACPI
-device it should make the corresponding platform device so we need to add
-the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/acpi_platform.c. This limitation is only for the platform
-devices, SPI and I2C devices are created automatically as described below.
-
 DMA support
 ~~~~~~~~~~~
 DMA controllers enumerated via ACPI should be registered in the system to

Documentation/cpu-freq/intel-pstate.txt

@@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to
 /sys/devices/system/cpu/intel_pstate/
 
       max_perf_pct: limits the maximum P state that will be requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the available performance. The
+      available (P states) performance may be reduced by the no_turbo
+      setting described below.
 
       min_perf_pct: limits the minimum P state that will be  requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the max (non-turbo)
+      performance level.
 
       no_turbo: limits the driver to selecting P states below the turbo
       frequency range.

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -9,6 +9,18 @@ Required Properties:
 - reg: physical base address of the controller and length of memory mapped
     region.
 
+Optional Properties:
+- clocks: List of clock handles. The parent clocks of the input clocks to the
+	devices in this power domain are set to oscclk before power gating
+	and restored back after powering on a domain. This is required for
+	all domains which are powered on and off and not required for unused
+	domains.
+- clock-names: The following clocks can be specified:
+	- oscclk: Oscillator clock.
+	- pclkN, clkN: Pairs of parent of input clock and input clock to the
+		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
+		are supported currently.
+
 Node of a device using power domains must have a samsung,power-domain property
 defined with a phandle to respective power domain.
 
@@ -19,6 +31,14 @@ Example:
 		reg = <0x10023C00 0x10>;
 	};
 
+	mfc_pd: power-domain@10044060 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044060 0x20>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+			<&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "pclk0", "clk0";
+	};
+
 Example of the node using power domain:
 
 	node {

Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt

@@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined
 under node /cpus/cpu@0.
 
 Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
-  for details
+- None
 
 Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+  details. OPPs *must* be supplied either via DT, i.e. this property, or
+  populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,
   in unit of nanoseconds.
 - voltage-tolerance: Specify the CPU voltage tolerance in percentage.

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -4,6 +4,13 @@ Required properties:
 
   - compatible: Must contain one of the following:
 
+    - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
+    - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
+    - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
+    - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
+    - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
+    - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+    - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
     - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.

Documentation/input/event-codes.txt

@@ -281,6 +281,19 @@ gestures can normally be extracted from it.
 If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
 device.
 
+INPUT_PROP_TOPBUTTONPAD:
+-----------------------
+Some laptops, most notably the Lenovo *40 series provide a trackstick
+device but do not have physical buttons associated with the trackstick
+device. Instead, the top area of the touchpad is marked to show
+visual/haptic areas for left, middle, right buttons intended to be used
+with the trackstick.
+
+If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons
+accordingly. This property does not affect kernel behavior.
+The kernel does not provide button emulation for such devices but treats
+them as any other INPUT_PROP_BUTTONPAD device.
+
 Guidelines:
 ==========
 The guidelines below ensure proper single-touch and multi-finger functionality.

Documentation/kernel-parameters.txt

@@ -2790,6 +2790,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			leaf rcu_node structure.  Useful for very large
 			systems.
 
+	rcutree.jiffies_till_sched_qs= [KNL]
+			Set required age in jiffies for a
+			given grace period before RCU starts
+			soliciting quiescent-state help from
+			rcu_note_context_switch().
+
 	rcutree.jiffies_till_first_fqs= [KNL]
 			Set delay from grace-period initialization to
 			first attempt to force quiescent states.
@@ -3526,7 +3532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			the allocated input device; If set to 0, video driver
 			will only send out the event without touching backlight
 			brightness level.
-			default: 0
+			default: 1
 
 	virtio_mmio.device=
 			[VMMIO] Memory mapped virtio (platform) device.

Documentation/laptops/00-INDEX

@@ -8,8 +8,8 @@ disk-shock-protection.txt
 	- information on hard disk shock protection.
 dslm.c
 	- Simple Disk Sleep Monitor program
-hpfall.c
-	- (HP) laptop accelerometer program for disk protection.
+freefall.c
+	- (HP/DELL) laptop accelerometer program for disk protection.
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt

Documentation/laptops/hpfall.c → Documentation/laptops/freefall.c

@@ -1,7 +1,9 @@
-/* Disk protection for HP machines.
+/* Disk protection for HP/DELL machines.
  *
  * Copyright 2008 Eric Piel
  * Copyright 2009 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2012 Sonal Santan
+ * Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
  *
  * GPLv2.
  */
@@ -18,24 +20,31 @@
 #include <signal.h>
 #include <sys/mman.h>
 #include <sched.h>
+#include <syslog.h>
 
-char unload_heads_path[64];
+static int noled;
+static char unload_heads_path[64];
+static char device_path[32];
+static const char app_name[] = "FREE FALL";
 
-int set_unload_heads_path(char *device)
+static int set_unload_heads_path(char *device)
 {
 	char devname[64];
 
 	if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
 		return -EINVAL;
-	strncpy(devname, device + 5, sizeof(devname));
+	strncpy(devname, device + 5, sizeof(devname) - 1);
+	strncpy(device_path, device, sizeof(device_path) - 1);
 
 	snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
 				"/sys/block/%s/device/unload_heads", devname);
 	return 0;
 }
-int valid_disk(void)
+
+static int valid_disk(void)
 {
 	int fd = open(unload_heads_path, O_RDONLY);
+
 	if (fd < 0) {
 		perror(unload_heads_path);
 		return 0;
@@ -45,43 +54,54 @@ int valid_disk(void)
 	return 1;
 }
 
-void write_int(char *path, int i)
+static void write_int(char *path, int i)
 {
 	char buf[1024];
 	int fd = open(path, O_RDWR);
+
 	if (fd < 0) {
 		perror("open");
 		exit(1);
 	}
+
 	sprintf(buf, "%d", i);
+
 	if (write(fd, buf, strlen(buf)) != strlen(buf)) {
 		perror("write");
 		exit(1);
 	}
+
 	close(fd);
 }
 
-void set_led(int on)
+static void set_led(int on)
 {
+	if (noled)
+		return;
 	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
 }
 
-void protect(int seconds)
+static void protect(int seconds)
 {
+	const char *str = (seconds == 0) ? "Unparked" : "Parked";
+
 	write_int(unload_heads_path, seconds*1000);
+	syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
 }
 
-int on_ac(void)
+static int on_ac(void)
 {
-//	/sys/class/power_supply/AC0/online
+	/* /sys/class/power_supply/AC0/online */
+	return 1;
 }
 
-int lid_open(void)
+static int lid_open(void)
 {
-//	/proc/acpi/button/lid/LID/state
+	/* /proc/acpi/button/lid/LID/state */
+	return 1;
 }
 
-void ignore_me(void)
+static void ignore_me(int signum)
 {
 	protect(0);
 	set_led(0);
@@ -90,6 +110,7 @@ void ignore_me(void)
 int main(int argc, char **argv)
 {
 	int fd, ret;
+	struct stat st;
 	struct sched_param param;
 
 	if (argc == 1)
@@ -111,7 +132,16 @@ int main(int argc, char **argv)
 		return EXIT_FAILURE;
 	}
 
-	daemon(0, 0);
+	if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
+		noled = 1;
+
+	if (daemon(0, 0) != 0) {
+		perror("daemon");
+		return EXIT_FAILURE;
+	}
+
+	openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
+
 	param.sched_priority = sched_get_priority_max(SCHED_FIFO);
 	sched_setscheduler(0, SCHED_FIFO, &param);
 	mlockall(MCL_CURRENT|MCL_FUTURE);
@@ -141,6 +171,7 @@ int main(int argc, char **argv)
 			alarm(20);
 	}
 
+	closelog();
 	close(fd);
 	return EXIT_SUCCESS;
 }

MAINTAINERS

@@ -156,7 +156,6 @@ F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
 M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
-M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c
@@ -1314,6 +1313,20 @@ W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported
+F:	arch/arm/boot/dts/emev2*
+F:	arch/arm/boot/dts/r7s*
+F:	arch/arm/boot/dts/r8a*
+F:	arch/arm/boot/dts/sh*
+F:	arch/arm/configs/ape6evm_defconfig
+F:	arch/arm/configs/armadillo800eva_defconfig
+F:	arch/arm/configs/bockw_defconfig
+F:	arch/arm/configs/genmai_defconfig
+F:	arch/arm/configs/koelsch_defconfig
+F:	arch/arm/configs/kzm9g_defconfig
+F:	arch/arm/configs/lager_defconfig
+F:	arch/arm/configs/mackerel_defconfig
+F:	arch/arm/configs/marzen_defconfig
+F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
@@ -4497,8 +4510,7 @@ S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 802.15.4 SUBSYSTEM
-M:	Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
-M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Alexander Aring <alex.aring@gmail.com>
 L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
@@ -6787,7 +6799,7 @@ F:	arch/x86/kernel/quirks.c
 
 PCI DRIVER FOR IMX6
 M:	Richard Zhu <r65037@freescale.com>
-M:	Shawn Guo <shawn.guo@linaro.org>
+M:	Shawn Guo <shawn.guo@freescale.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -6944,6 +6956,12 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.c
 
+PIN CONTROLLER - RENESAS
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L:	linux-sh@vger.kernel.org
+S:	Maintained
+F:	drivers/pinctrl/sh-pfc/
+
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <t.figa@samsung.com>
 M:	Thomas Abraham <thomas.abraham@linaro.org>
@@ -7406,7 +7424,7 @@ S:	Orphan
 F:	drivers/net/wireless/ray*
 
 RCUTORTURE MODULE
-M:	Josh Triplett <josh@freedesktop.org>
+M:	Josh Triplett <josh@joshtriplett.org>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
@@ -8007,6 +8025,16 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERIAL ATA AHCI PLATFORM devices support
+M:	Hans de Goede <hdegoede@redhat.com>
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Supported
+F:	drivers/ata/ahci_platform.c
+F:	drivers/ata/libahci_platform.c
+F:	include/linux/ahci_platform.h
+
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
 M:	Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
 L:	linux-scsi@vger.kernel.org
@@ -8894,7 +8922,7 @@ M:	Stephen Warren <swarren@wwwdotorg.org>
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-tegra@vger.kernel.org
 Q:	http://patchwork.ozlabs.org/project/linux-tegra/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
 S:	Supported
 N:	[^a-z]tegra
 
@@ -8984,7 +9012,7 @@ F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
 M:	Zhang Rui <rui.zhang@intel.com>
-M:	Eduardo Valentin <eduardo.valentin@ti.com>
+M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
@@ -9011,7 +9039,7 @@ S:	Maintained
 F:	drivers/platform/x86/thinkpad_acpi.c
 
 TI BANDGAP AND THERMAL DRIVER
-M:	Eduardo Valentin <eduardo.valentin@ti.com>
+M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/thermal/ti-soc-thermal/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION =
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*
@@ -41,6 +41,29 @@ unexport GREP_OPTIONS
 # descending is started. They are now explicitly listed as the
 # prepare rule.
 
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
 # To put more focus on warnings, be less verbose as default
 # Use 'make V=1' to see the full commands
 
@@ -51,6 +74,29 @@ ifndef KBUILD_VERBOSE
   KBUILD_VERBOSE = 0
 endif
 
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
+else
+  quiet=quiet_
+  Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+  quiet=silent_
+endif
+else					# make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+  quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
 # Call a source code checker (by default, "sparse") as part of the
 # C compilation.
 #
@@ -128,8 +174,11 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 
 # Fake the "Entering directory" message once, so that IDEs/editors are
 # able to understand relative filenames.
+       echodir := @echo
+ quiet_echodir := @echo
+silent_echodir := @:
 sub-make: FORCE
-	@echo "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
+	$($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
 	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 	KBUILD_SRC=$(CURDIR) \
 	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
@@ -292,52 +341,6 @@ endif
 export KBUILD_MODULES KBUILD_BUILTIN
 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-#	$(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
-  quiet =
-  Q =
-else
-  quiet=quiet_
-  Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
-ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
-  quiet=silent_
-endif
-else					# make-3.8x
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
-  quiet=silent_
-endif
-endif
-
-export quiet Q KBUILD_VERBOSE
-
 ifneq ($(CC),)
 ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
 COMPILER := clang
@@ -685,6 +688,8 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
 endif
 endif
 
+KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
+
 ifdef CONFIG_DEBUG_INFO
 KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -Wa,-gdwarf-2
@@ -1173,7 +1178,7 @@ distclean: mrproper
 # Packaging of the kernel to various formats
 # ---------------------------------------------------------------------------
 # rpm target kept for backward compatibility
-package-dir	:= $(srctree)/scripts/package
+package-dir	:= scripts/package
 
 %src-pkg: FORCE
 	$(Q)$(MAKE) $(build)=$(package-dir) $@

arch/arm/Kconfig

@@ -6,6 +6,7 @@ config ARM
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -312,7 +313,7 @@ config ARCH_MULTIPLATFORM
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
+	select ARM_PATCH_PHYS_VIRT if MMU
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
@@ -658,7 +659,7 @@ config ARCH_MSM
 config ARCH_SHMOBILE_LEGACY
 	bool "Renesas ARM SoCs (non-multiplatform)"
 	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT
+	select ARM_PATCH_PHYS_VIRT if MMU
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP

arch/arm/boot/dts/am335x-evm.dts

@@ -529,8 +529,8 @@
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 1 2
 		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
 };
 
 &tps {

arch/arm/boot/dts/am335x-evmsk.dts

@@ -560,8 +560,8 @@
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 1 2
 		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
 };
 
 &tscadc {

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -105,10 +105,16 @@
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
 };
 
 &elm {

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -925,7 +925,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
 				 <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -1045,6 +1045,8 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&usb>, <&udphs_clk>;
+				clock-names = "hclk", "pclk";
 				status = "disabled";
 
 				ep0 {
@@ -1122,6 +1124,7 @@
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pwm_clk>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
@@ -1153,8 +1156,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
-				 <&uhpck>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/dra7-evm.dts

@@ -240,6 +240,7 @@
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -673,10 +673,12 @@
 
 	l3_iclk_div: l3_iclk_div {
 		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x0100>;
 		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
+		ti,index-power-of-two;
 	};
 
 	l4_root_clk_div: l4_root_clk_div {
@@ -684,7 +686,7 @@
 		compatible = "fixed-factor-clock";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
-		clock-div = <1>;
+		clock-div = <2>;
 	};
 
 	video1_clk2_div: video1_clk2_div {

arch/arm/boot/dts/exynos4.dtsi

@@ -554,7 +554,7 @@
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
 		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
-		#pwm-cells = <2>;
+		#pwm-cells = <3>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos5420.dtsi

@@ -167,7 +167,7 @@
 		compatible = "samsung,exynos5420-audss-clock";
 		reg = <0x03810000 0x0C>;
 		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
 		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
 	};
@@ -260,6 +260,9 @@
 	mfc_pd: power-domain@10044060 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044060 0x20>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+			<&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "pclk0", "clk0";
 	};
 
 	disp_pd: power-domain@100440C0 {

arch/arm/boot/dts/hi3620.dtsi

@@ -73,7 +73,7 @@
 
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
-			reg = <0xfc10000 0x100000>;
+			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
 			cache-unified;
 			cache-level = <2>;

arch/arm/boot/dts/omap3-n900.dts

@@ -353,7 +353,7 @@
 	};
 
 	twl_power: power {
-		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		compatible = "ti,twl4030-power-n900";
 		ti,use_poweroff;
 	};
 };

arch/arm/boot/dts/r8a7791.dtsi

@@ -540,9 +540,9 @@
 			#clock-cells = <0>;
 			clock-output-names = "sd1";
 		};
-		sd2_clk: sd3_clk@e615007c {
+		sd2_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
+			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
 			clock-output-names = "sd2";

arch/arm/boot/dts/ste-nomadik-s8815.dts

@@ -4,7 +4,7 @@
  */
 
 /dts-v1/;
-/include/ "ste-nomadik-stn8815.dtsi"
+#include "ste-nomadik-stn8815.dtsi"
 
 / {
 	model = "Calao Systems USB-S8815";

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -1,7 +1,9 @@
 /*
  * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
  */
-/include/ "skeleton.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
 
 / {
 	#address-cells = <1>;
@@ -842,8 +844,7 @@
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
-			cd-gpios = <&gpio3 15 0x1>;
-			cd-inverted;
+			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;

arch/arm/crypto/aesbs-glue.c

@@ -137,7 +137,7 @@ static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
 				dst += AES_BLOCK_SIZE;
 			} while (--blocks);
 		}
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -158,7 +158,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
 		bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->dec, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	while (walk.nbytes) {
 		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
@@ -182,7 +182,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
 			dst += AES_BLOCK_SIZE;
 			src += AES_BLOCK_SIZE;
 		} while (--blocks);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -268,7 +268,7 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
 		bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->enc, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -292,7 +292,7 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
 		bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->dec, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }

arch/arm/include/asm/mach/arch.h

@@ -50,6 +50,7 @@ struct machine_desc {
 	struct smp_operations	*smp;		/* SMP operations	*/
 	bool			(*smp_init)(void);
 	void			(*fixup)(struct tag *, char **);
+	void			(*dt_fixup)(void);
 	void			(*init_meminfo)(void);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/

arch/arm/kernel/devtree.c

@@ -212,7 +212,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
+	if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
@@ -237,6 +237,12 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 		dump_machine_table(); /* does not return */
 	}
 
+	/* We really don't want to do this, but sometimes firmware provides buggy data */
+	if (mdesc->dt_fixup)
+		mdesc->dt_fixup();
+
+	early_init_dt_scan_nodes();
+
 	/* Change machine number to match the mdesc we're using */
 	__machine_arch_type = mdesc->nr;
 

arch/arm/kernel/iwmmxt.S

@@ -94,13 +94,19 @@ ENTRY(iwmmxt_task_enable)
 
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
+	bl	concan_save
 
-	teq	r1, #0				@ test for last ownership
-	mov	lr, r9				@ normal exit from exception
-	beq	concan_load			@ no owner, skip save
+#ifdef CONFIG_PREEMPT_COUNT
+	get_thread_info r10
+#endif
+4:	dec_preempt_count r10, r3
+	mov	pc, r9				@ normal exit from exception
 
 concan_save:
 
+	teq	r1, #0				@ test for last ownership
+	beq	concan_load			@ no owner, skip save
+
 	tmrc	r2, wCon
 
 	@ CUP? wCx
@@ -138,7 +144,7 @@ concan_dump:
 	wstrd	wR15, [r1, #MMX_WR15]
 
 2:	teq	r0, #0				@ anything to load?
-	beq	3f
+	moveq	pc, lr				@ if not, return
 
 concan_load:
 
@@ -171,14 +177,9 @@ concan_load:
 	@ clear CUP/MUP (only if r1 != 0)
 	teq	r1, #0
 	mov 	r2, #0
-	beq	3f
-	tmcr	wCon, r2
+	moveq	pc, lr
 
-3:
-#ifdef CONFIG_PREEMPT_COUNT
-	get_thread_info r10
-#endif
-4:	dec_preempt_count r10, r3
+	tmcr	wCon, r2
 	mov	pc, lr
 
 /*

arch/arm/kernel/kgdb.c

@@ -160,12 +160,16 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 static struct undef_hook kgdb_brkpt_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
+	.cpsr_mask		= MODE_MASK,
+	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
 static struct undef_hook kgdb_compiled_brkpt_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
+	.cpsr_mask		= MODE_MASK,
+	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 

arch/arm/kernel/kprobes-test-arm.c

@@ -74,8 +74,6 @@ void kprobe_arm_test_cases(void)
 	TEST_RRR( op "lt" s "	r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
 	TEST_RR(  op "gt" s "	r12, r13"       ", r",14,val, ", ror r",14,7,"")\
 	TEST_RR(  op "le" s "	r14, r",0, val, ", r13"       ", lsl r",14,8,"")\
-	TEST_RR(  op s "	r12, pc"        ", r",14,val, ", ror r",14,7,"")\
-	TEST_RR(  op s "	r14, r",0, val, ", pc"        ", lsl r",14,8,"")\
 	TEST_R(   op "eq" s "	r0,  r",11,VAL1,", #0xf5")			\
 	TEST_R(   op "ne" s "	r11, r",0, VAL1,", #0xf5000000")		\
 	TEST_R(   op s "	r7,  r",8, VAL2,", #0x000af000")		\
@@ -103,8 +101,6 @@ void kprobe_arm_test_cases(void)
 	TEST_RRR( op "ge	r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")	\
 	TEST_RR(  op "le	r13"       ", r",14,val, ", ror r",14,7,"")	\
 	TEST_RR(  op "gt	r",0, val, ", r13"       ", lsl r",14,8,"")	\
-	TEST_RR(  op "	pc"        ", r",14,val, ", ror r",14,7,"")		\
-	TEST_RR(  op "	r",0, val, ", pc"        ", lsl r",14,8,"")		\
 	TEST_R(   op "eq	r",11,VAL1,", #0xf5")				\
 	TEST_R(   op "ne	r",0, VAL1,", #0xf5000000")			\
 	TEST_R(   op "	r",8, VAL2,", #0x000af000")
@@ -125,7 +121,6 @@ void kprobe_arm_test_cases(void)
 	TEST_RR(  op "ge" s "	r11, r",11,N(val),", asr r",7, 6,"")	\
 	TEST_RR(  op "lt" s "	r12, r",11,val, ", ror r",14,7,"")	\
 	TEST_R(   op "gt" s "	r14, r13"       ", lsl r",14,8,"")	\
-	TEST_R(   op "le" s "	r14, pc"        ", lsl r",14,8,"")	\
 	TEST(     op "eq" s "	r0,  #0xf5")				\
 	TEST(     op "ne" s "	r11, #0xf5000000")			\
 	TEST(     op s "	r7,  #0x000af000")			\
@@ -159,12 +154,19 @@ void kprobe_arm_test_cases(void)
 	TEST_SUPPORTED("cmp	pc, #0x1000");
 	TEST_SUPPORTED("cmp	sp, #0x1000");
 
-	/* Data-processing with PC as shift*/
+	/* Data-processing with PC and a shift count in a register */
 	TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) "	@ cmp	r12, r14, asl pc")
 	TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) "	@ mov	r12, r14, asl pc")
 	TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) "	@ add	r10, r12, r14, asl pc")
-
-	/* Data-processing with PC as shift*/
+	TEST_UNSUPPORTED(__inst_arm(0xe151021f) "	@ cmp	r1, pc, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe17f0211) "	@ cmn	pc, r1, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe1a0121f) "	@ mov	r1, pc, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe1a0f211) "	@ mov	pc, r1, lsl r2")
+	TEST_UNSUPPORTED(__inst_arm(0xe042131f) "	@ sub	r1, r2, pc, lsl r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe1cf1312) "	@ bic	r1, pc, r2, lsl r3")
+	TEST_UNSUPPORTED(__inst_arm(0xe081f312) "	@ add	pc, r1, r2, lsl r3")
+
+	/* Data-processing with PC as a target and status registers updated */
 	TEST_UNSUPPORTED("movs	pc, r1")
 	TEST_UNSUPPORTED("movs	pc, r1, lsl r2")
 	TEST_UNSUPPORTED("movs	pc, #0x10000")
@@ -187,14 +189,14 @@ void kprobe_arm_test_cases(void)
 	TEST_BF_R ("add	pc, pc, r",14,2f-1f-8,"")
 	TEST_BF_R ("add	pc, r",14,2f-1f-8,", pc")
 	TEST_BF_R ("mov	pc, r",0,2f,"")
-	TEST_BF_RR("mov	pc, r",0,2f,", asl r",1,0,"")
+	TEST_BF_R ("add	pc, pc, r",14,(2f-1f-8)*2,", asr #1")
 	TEST_BB(   "sub	pc, pc, #1b-2b+8")
 #if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
 	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
 #endif
 	TEST_BB_R( "sub	pc, pc, r",14, 1f-2f+8,"")
 	TEST_BB_R( "rsb	pc, r",14,1f-2f+8,", pc")
-	TEST_RR(   "add	pc, pc, r",10,-2,", asl r",11,1,"")
+	TEST_R(    "add	pc, pc, r",10,-2,", asl #1")
 #ifdef CONFIG_THUMB2_KERNEL
 	TEST_ARM_TO_THUMB_INTERWORK_R("add	pc, pc, r",0,3f-1f-8+1,"")
 	TEST_ARM_TO_THUMB_INTERWORK_R("sub	pc, r",0,3f+8+1,", #8")
@@ -216,6 +218,7 @@ void kprobe_arm_test_cases(void)
 	TEST_BB_R("bx	r",7,2f,"")
 	TEST_BF_R("bxeq	r",14,2f,"")
 
+#if __LINUX_ARM_ARCH__ >= 5
 	TEST_R("clz	r0, r",0, 0x0,"")
 	TEST_R("clzeq	r7, r",14,0x1,"")
 	TEST_R("clz	lr, r",7, 0xffffffff,"")
@@ -337,6 +340,7 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
 	TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
 	TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
+#endif
 
 	TEST_GROUP("Multiply and multiply-accumulate")
 
@@ -559,6 +563,7 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED("ldrsht	r1, [r2], #48")
 #endif
 
+#if __LINUX_ARM_ARCH__ >= 5
 	TEST_RPR(  "strd	r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
 	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
 	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
@@ -595,6 +600,7 @@ void kprobe_arm_test_cases(void)
 	TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) "	@ ldrd r12, [pc, #48]!")
 	TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) "	@ ldrd pc, [r9], #48")
 	TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) "	@ ldrd lr, [r9], #48")
+#endif
 
 	TEST_GROUP("Miscellaneous")
 
@@ -1227,7 +1233,9 @@ void kprobe_arm_test_cases(void)
 	TEST_COPROCESSOR( "mrc"two"	0, 0, r0, cr0, cr0, 0")
 
 	COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
+#if __LINUX_ARM_ARCH__ >= 5
 	COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
+#endif
 	TEST_UNSUPPORTED("svc	0")
 	TEST_UNSUPPORTED("svc	0xffffff")
 
@@ -1287,7 +1295,9 @@ void kprobe_arm_test_cases(void)
 	TEST(	"blx	__dummy_thumb_subroutine_odd")
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
+#if __LINUX_ARM_ARCH__ >= 5
 	COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
+#endif
 #if __LINUX_ARM_ARCH__ >= 6
 	COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
 #endif

arch/arm/kernel/kprobes-test.c

@@ -225,6 +225,7 @@ static int pre_handler_called;
 static int post_handler_called;
 static int jprobe_func_called;
 static int kretprobe_handler_called;
+static int tests_failed;
 
 #define FUNC_ARG1 0x12345678
 #define FUNC_ARG2 0xabcdef
@@ -461,6 +462,13 @@ static int run_api_tests(long (*func)(long, long))
 
 	pr_info("    jprobe\n");
 	ret = test_jprobe(func);
+#if defined(CONFIG_THUMB2_KERNEL) && !defined(MODULE)
+	if (ret == -EINVAL) {
+		pr_err("FAIL: Known longtime bug with jprobe on Thumb kernels\n");
+		tests_failed = ret;
+		ret = 0;
+	}
+#endif
 	if (ret < 0)
 		return ret;
 
@@ -1671,6 +1679,8 @@ static int __init run_all_tests(void)
 #endif
 
 out:
+	if (ret == 0)
+		ret = tests_failed;
 	if (ret == 0)
 		pr_info("Finished kprobe tests OK\n");
 	else

arch/arm/kernel/probes-arm.c

@@ -341,12 +341,12 @@ static const union decode_item arm_cccc_000x_table[] = {
 	/* CMP (reg-shift reg)	cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
 	/* CMN (reg-shift reg)	cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
 	DECODE_EMULATEX	(0x0f900090, 0x01100010, PROBES_DATA_PROCESSING_REG,
-						 REGS(ANY, 0, NOPC, 0, ANY)),
+						 REGS(NOPC, 0, NOPC, 0, NOPC)),
 
 	/* MOV (reg-shift reg)	cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
 	/* MVN (reg-shift reg)	cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
 	DECODE_EMULATEX	(0x0fa00090, 0x01a00010, PROBES_DATA_PROCESSING_REG,
-						 REGS(0, ANY, NOPC, 0, ANY)),
+						 REGS(0, NOPC, NOPC, 0, NOPC)),
 
 	/* AND (reg-shift reg)	cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
 	/* EOR (reg-shift reg)	cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
@@ -359,7 +359,7 @@ static const union decode_item arm_cccc_000x_table[] = {
 	/* ORR (reg-shift reg)	cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
 	/* BIC (reg-shift reg)	cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
 	DECODE_EMULATEX	(0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
-						 REGS(ANY, ANY, NOPC, 0, ANY)),
+						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
 
 	DECODE_END
 };

arch/arm/kernel/topology.c

@@ -275,7 +275,7 @@ void store_cpu_topology(unsigned int cpuid)
 		cpu_topology[cpuid].socket_id, mpidr);
 }
 
-static inline const int cpu_corepower_flags(void)
+static inline int cpu_corepower_flags(void)
 {
 	return SD_SHARE_PKG_RESOURCES  | SD_SHARE_POWERDOMAIN;
 }

arch/arm/mach-exynos/exynos.c

@@ -173,10 +173,8 @@ static struct platform_device exynos_cpuidle = {
 
 void __init exynos_cpuidle_init(void)
 {
-	if (soc_is_exynos5440())
-		return;
-
-	platform_device_register(&exynos_cpuidle);
+	if (soc_is_exynos4210() || soc_is_exynos5250())
+		platform_device_register(&exynos_cpuidle);
 }
 
 void __init exynos_cpufreq_init(void)
@@ -297,7 +295,7 @@ static void __init exynos_dt_machine_init(void)
 	 * This is called from smp_prepare_cpus if we've built for SMP, but
 	 * we still need to set it up for PM and firmware ops if not.
 	 */
-	if (!IS_ENABLED(SMP))
+	if (!IS_ENABLED(CONFIG_SMP))
 		exynos_sysram_init();
 
 	exynos_cpuidle_init();
@@ -337,6 +335,15 @@ static void __init exynos_reserve(void)
 #endif
 }
 
+static void __init exynos_dt_fixup(void)
+{
+	/*
+	 * Some versions of uboot pass garbage entries in the memory node,
+	 * use the old CONFIG_ARM_NR_BANKS
+	 */
+	of_fdt_limit_memory(8);
+}
+
 DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
@@ -350,4 +357,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.dt_compat	= exynos_dt_compat,
 	.restart	= exynos_restart,
 	.reserve	= exynos_reserve,
+	.dt_fixup	= exynos_dt_fixup,
 MACHINE_END

arch/arm/mach-exynos/firmware.c

@@ -57,8 +57,13 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 
 	boot_reg = sysram_ns_base_addr + 0x1c;
 
-	if (!soc_is_exynos4212() && !soc_is_exynos3250())
-		boot_reg += 4*cpu;
+	/*
+	 * Almost all Exynos-series of SoCs that run in secure mode don't need
+	 * additional offset for every CPU, with Exynos4412 being the only
+	 * exception.
+	 */
+	if (soc_is_exynos4412())
+		boot_reg += 4 * cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;

arch/arm/mach-exynos/hotplug.c

@@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void)
 
 static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
+	u32 mpidr = cpu_logical_map(cpu);
+	u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
 	for (;;) {
 
-		/* make cpu1 to be turned off at next WFI command */
-		if (cpu == 1)
-			exynos_cpu_power_down(cpu);
+		/* Turn the CPU off on next WFI instruction. */
+		exynos_cpu_power_down(core_id);
 
 		wfi();
 
-		if (pen_release == cpu_logical_map(cpu)) {
+		if (pen_release == core_id) {
 			/*
 			 * OK, proper wakeup, we're done
 			 */

arch/arm/mach-exynos/platsmp.c

@@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu)
 static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
-	unsigned long phys_cpu = cpu_logical_map(cpu);
+	u32 mpidr = cpu_logical_map(cpu);
+	u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	int ret = -ENOSYS;
 
 	/*
@@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the holding pen - release it, then wait for it to flag
 	 * that it has been released by resetting pen_release.
 	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * Note that "pen_release" is the hardware CPU core ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	write_pen_release(phys_cpu);
+	write_pen_release(core_id);
 
-	if (!exynos_cpu_power_state(cpu)) {
-		exynos_cpu_power_up(cpu);
+	if (!exynos_cpu_power_state(core_id)) {
+		exynos_cpu_power_up(core_id);
 		timeout = 10;
 
 		/* wait max 10 ms until cpu1 is on */
-		while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
+		while (exynos_cpu_power_state(core_id)
+		       != S5P_CORE_LOCAL_PWR_EN) {
 			if (timeout-- == 0)
 				break;
 
@@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * Try to set boot address using firmware first
 		 * and fall back to boot register if it fails.
 		 */
-		ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+		ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
 		if (ret && ret != -ENOSYS)
 			goto fail;
 		if (ret == -ENOSYS) {
-			void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+			void __iomem *boot_reg = cpu_boot_reg(core_id);
 
 			if (IS_ERR(boot_reg)) {
 				ret = PTR_ERR(boot_reg);
 				goto fail;
 			}
-			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+			__raw_writel(boot_addr, cpu_boot_reg(core_id));
 		}
 
-		call_firmware_op(cpu_boot, phys_cpu);
+		call_firmware_op(cpu_boot, core_id);
 
 		arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
@@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	 * boot register if it fails.
 	 */
 	for (i = 1; i < max_cpus; ++i) {
-		unsigned long phys_cpu;
 		unsigned long boot_addr;
+		u32 mpidr;
+		u32 core_id;
 		int ret;
 
-		phys_cpu = cpu_logical_map(i);
+		mpidr = cpu_logical_map(i);
+		core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 		boot_addr = virt_to_phys(exynos4_secondary_startup);
 
-		ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
+		ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
 		if (ret && ret != -ENOSYS)
 			break;
 		if (ret == -ENOSYS) {
-			void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
+			void __iomem *boot_reg = cpu_boot_reg(core_id);
 
 			if (IS_ERR(boot_reg))
 				break;
-			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+			__raw_writel(boot_addr, cpu_boot_reg(core_id));
 		}
 	}
 }

arch/arm/mach-exynos/pm_domains.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/pm_domain.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
@@ -24,6 +25,8 @@
 
 #include "regs-pmu.h"
 
+#define MAX_CLK_PER_DOMAIN	4
+
 /*
  * Exynos specific wrapper around the generic power domain
  */
@@ -32,6 +35,9 @@ struct exynos_pm_domain {
 	char const *name;
 	bool is_off;
 	struct generic_pm_domain pd;
+	struct clk *oscclk;
+	struct clk *clk[MAX_CLK_PER_DOMAIN];
+	struct clk *pclk[MAX_CLK_PER_DOMAIN];
 };
 
 static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
@@ -44,6 +50,19 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 	pd = container_of(domain, struct exynos_pm_domain, pd);
 	base = pd->base;
 
+	/* Set oscclk before powering off a domain*/
+	if (!power_on) {
+		int i;
+
+		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+			if (IS_ERR(pd->clk[i]))
+				break;
+			if (clk_set_parent(pd->clk[i], pd->oscclk))
+				pr_err("%s: error setting oscclk as parent to clock %d\n",
+						pd->name, i);
+		}
+	}
+
 	pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
 	__raw_writel(pwr, base);
 
@@ -60,6 +79,20 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 		cpu_relax();
 		usleep_range(80, 100);
 	}
+
+	/* Restore clocks after powering on a domain*/
+	if (power_on) {
+		int i;
+
+		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+			if (IS_ERR(pd->clk[i]))
+				break;
+			if (clk_set_parent(pd->clk[i], pd->pclk[i]))
+				pr_err("%s: error setting parent to clock%d\n",
+						pd->name, i);
+		}
+	}
+
 	return 0;
 }
 
@@ -152,9 +185,11 @@ static __init int exynos4_pm_init_power_domain(void)
 
 	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
 		struct exynos_pm_domain *pd;
-		int on;
+		int on, i;
+		struct device *dev;
 
 		pdev = of_find_device_by_node(np);
+		dev = &pdev->dev;
 
 		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
 		if (!pd) {
@@ -170,6 +205,30 @@ static __init int exynos4_pm_init_power_domain(void)
 		pd->pd.power_on = exynos_pd_power_on;
 		pd->pd.of_node = np;
 
+		pd->oscclk = clk_get(dev, "oscclk");
+		if (IS_ERR(pd->oscclk))
+			goto no_clk;
+
+		for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
+			char clk_name[8];
+
+			snprintf(clk_name, sizeof(clk_name), "clk%d", i);
+			pd->clk[i] = clk_get(dev, clk_name);
+			if (IS_ERR(pd->clk[i]))
+				break;
+			snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
+			pd->pclk[i] = clk_get(dev, clk_name);
+			if (IS_ERR(pd->pclk[i])) {
+				clk_put(pd->clk[i]);
+				pd->clk[i] = ERR_PTR(-EINVAL);
+				break;
+			}
+		}
+
+		if (IS_ERR(pd->clk[0]))
+			clk_put(pd->oscclk);
+
+no_clk:
 		platform_set_drvdata(pdev, pd);
 
 		on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;

arch/arm/mach-imx/clk-gate2.c

@@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw)
 
 	spin_lock_irqsave(gate->lock, flags);
 
-	if (gate->share_count && --(*gate->share_count) > 0)
-		goto out;
+	if (gate->share_count) {
+		if (WARN_ON(*gate->share_count == 0))
+			goto out;
+		else if (--(*gate->share_count) > 0)
+			goto out;
+	}
 
 	reg = readl(gate->reg);
 	reg &= ~(3 << gate->bit_idx);
@@ -78,19 +82,26 @@ out:
 	spin_unlock_irqrestore(gate->lock, flags);
 }
 
-static int clk_gate2_is_enabled(struct clk_hw *hw)
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
 {
-	u32 reg;
-	struct clk_gate2 *gate = to_clk_gate2(hw);
+	u32 val = readl(reg);
 
-	reg = readl(gate->reg);
-
-	if (((reg >> gate->bit_idx) & 1) == 1)
+	if (((val >> bit_idx) & 1) == 1)
 		return 1;
 
 	return 0;
 }
 
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+	struct clk_gate2 *gate = to_clk_gate2(hw);
+
+	if (gate->share_count)
+		return !!(*gate->share_count);
+	else
+		return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
 static struct clk_ops clk_gate2_ops = {
 	.enable = clk_gate2_enable,
 	.disable = clk_gate2_disable,
@@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 	gate->bit_idx = bit_idx;
 	gate->flags = clk_gate2_flags;
 	gate->lock = lock;
+
+	/* Initialize share_count per hardware state */
+	if (share_count)
+		*share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
 	gate->share_count = share_count;
 
 	init.name = name;

arch/arm/mach-imx/clk-imx6q.c

@@ -70,7 +70,7 @@ static const char *cko_sels[] = { "cko1", "cko2", };
 static const char *lvds_sels[] = {
 	"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
 	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
-	"pcie_ref", "sata_ref",
+	"pcie_ref_125m", "sata_ref_100m",
 };
 
 enum mx6q_clks {
@@ -491,7 +491,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	/* All existing boards with PCIe use LVDS1 */
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
-		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+		clk_set_parent(clk[lvds1_sel], clk[sata_ref_100m]);
 
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);

arch/arm/mach-mvebu/coherency.c

@@ -292,6 +292,10 @@ static struct notifier_block mvebu_hwcc_nb = {
 	.notifier_call = mvebu_hwcc_notifier,
 };
 
+static struct notifier_block mvebu_hwcc_pci_nb = {
+	.notifier_call = mvebu_hwcc_notifier,
+};
+
 static void __init armada_370_coherency_init(struct device_node *np)
 {
 	struct resource res;
@@ -427,7 +431,7 @@ static int __init coherency_pci_init(void)
 {
 	if (coherency_available())
 		bus_register_notifier(&pci_bus_type,
-				       &mvebu_hwcc_nb);
+				       &mvebu_hwcc_pci_nb);
 	return 0;
 }
 

arch/arm/mach-mvebu/headsmp-a9.S

@@ -15,6 +15,8 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 	__CPUINIT
 #define CPU_RESUME_ADDR_REG 0xf10182d4
 
@@ -22,13 +24,18 @@
 .global armada_375_smp_cpu1_enable_code_end
 
 armada_375_smp_cpu1_enable_code_start:
-	ldr     r0, [pc, #4]
+ARM_BE8(setend	be)
+	adr     r0, 1f
+	ldr	r0, [r0]
 	ldr     r1, [r0]
+ARM_BE8(rev	r1, r1)
 	mov     pc, r1
+1:
 	.word   CPU_RESUME_ADDR_REG
 armada_375_smp_cpu1_enable_code_end:
 
 ENTRY(mvebu_cortex_a9_secondary_startup)
+ARM_BE8(setend	be)
 	bl      v7_invalidate_l1
 	b	secondary_startup
 ENDPROC(mvebu_cortex_a9_secondary_startup)

arch/arm/mach-mvebu/pmsu.c

@@ -201,12 +201,12 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
 
 	/* Test the CR_C bit and set it if it was cleared */
 	asm volatile(
-	"mrc	p15, 0, %0, c1, c0, 0 \n\t"
-	"tst	%0, #(1 << 2) \n\t"
-	"orreq	%0, %0, #(1 << 2) \n\t"
-	"mcreq	p15, 0, %0, c1, c0, 0 \n\t"
+	"mrc	p15, 0, r0, c1, c0, 0 \n\t"
+	"tst	r0, #(1 << 2) \n\t"
+	"orreq	r0, r0, #(1 << 2) \n\t"
+	"mcreq	p15, 0, r0, c1, c0, 0 \n\t"
 	"isb	"
-	: : "r" (0));
+	: : : "r0");
 
 	pr_warn("Failed to suspend the system\n");
 

arch/arm/mach-omap2/clkt_dpll.c

@@ -76,7 +76,7 @@
  * (assuming that it is counting N upwards), or -2 if the enclosing loop
  * should skip to the next iteration (again assuming N is increasing).
  */
-static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
 {
 	struct dpll_data *dd;
 	long fint, fint_min, fint_max;

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -26,11 +26,14 @@
 #define OMAP3430_EN_WDT3_SHIFT				12
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 #define OMAP3430_ST_IVA2_SHIFT				0
 #define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
 #define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
 #define OMAP3430_IVA2_CLK_SRC_SHIFT			19
 #define OMAP3430_IVA2_CLK_SRC_WIDTH			3

arch/arm/mach-omap2/common.h

@@ -162,7 +162,8 @@ static inline void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
 }
 #endif
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
 void omap44xx_restart(enum reboot_mode mode, const char *cmd);
 #else
 static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)

arch/arm/mach-omap2/devices.c

@@ -297,33 +297,6 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
-		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
-
-static struct platform_device omap_hdmi_audio = {
-	.name	= "omap-hdmi-audio",
-	.id	= -1,
-};
-
-static void __init omap_init_hdmi_audio(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dss_hdmi");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev),
-	     "Can't build omap_device for omap-hdmi-audio-dai.\n");
-
-	platform_device_register(&omap_hdmi_audio);
-}
-#else
-static inline void omap_init_hdmi_audio(void) {}
-#endif
-
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -459,7 +432,6 @@ static int __init omap2_init_devices(void)
 	 */
 	omap_init_audio();
 	omap_init_camera();
-	omap_init_hdmi_audio();
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {

arch/arm/mach-omap2/dsp.c

@@ -29,6 +29,7 @@
 #ifdef CONFIG_TIDSPBRIDGE_DVFS
 #include "omap-pm.h"
 #endif
+#include "soc.h"
 
 #include <linux/platform_data/dsp-omap.h>
 
@@ -59,6 +60,9 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
 	phys_addr_t paddr;
 
+	if (!cpu_is_omap34xx())
+		return;
+
 	if (!size)
 		return;
 
@@ -83,6 +87,9 @@ static int __init omap_dsp_init(void)
 	int err = -ENOMEM;
 	struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
 
+	if (!cpu_is_omap34xx())
+		return 0;
+
 	pdata->phys_mempool_base = omap_dsp_get_mempool_base();
 
 	if (pdata->phys_mempool_base) {
@@ -115,6 +122,9 @@ module_init(omap_dsp_init);
 
 static void __exit omap_dsp_exit(void)
 {
+	if (!cpu_is_omap34xx())
+		return;
+
 	platform_device_unregister(omap_dsp_pdev);
 }
 module_exit(omap_dsp_exit);

arch/arm/mach-omap2/gpmc-nand.c

@@ -50,6 +50,16 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 		 soc_is_omap54xx() || soc_is_dra7xx())
 		return 1;
 
+	if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
+		 ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
+		if (cpu_is_omap24xx())
+			return 0;
+		else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
+			return 0;
+		else
+			return 1;
+	}
+
 	/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
 	 * which require H/W based ECC error detection */
 	if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
@@ -57,14 +67,6 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 		 (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
 		return 0;
 
-	/*
-	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
-	 * and AM33xx derivates. Other chips may be added if confirmed to work.
-	 */
-	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)))
-		return 0;
-
 	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
 	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW)
 		return 1;

arch/arm/mach-omap2/gpmc.c

@@ -1615,7 +1615,7 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		return ret;
 	}
 
-	for_each_child_of_node(pdev->dev.of_node, child) {
+	for_each_available_child_of_node(pdev->dev.of_node, child) {
 
 		if (!child->name)
 			continue;

arch/arm/mach-omap2/omap4-common.c

@@ -168,6 +168,10 @@ static void omap4_l2c310_write_sec(unsigned long val, unsigned reg)
 		smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX;
 		break;
 
+	case L310_POWER_CTRL:
+		pr_info_once("OMAP L2C310: ROM does not support power control setting\n");
+		return;
+
 	default:
 		WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg);
 		return;

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -1268,9 +1268,6 @@ static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
 };
 
 /* sata */
-static struct omap_hwmod_opt_clk sata_opt_clks[] = {
-	{ .role = "ref_clk", .clk = "sata_ref_clk" },
-};
 
 static struct omap_hwmod dra7xx_sata_hwmod = {
 	.name		= "sata",
@@ -1278,6 +1275,7 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 	.clkdm_name	= "l3init_clkdm",
 	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 	.main_clk	= "func_48m_fclk",
+	.mpu_rt_idx	= 1,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
@@ -1285,8 +1283,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
-	.opt_clks	= sata_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(sata_opt_clks),
 };
 
 /*
@@ -1731,8 +1727,20 @@ static struct omap_hwmod dra7xx_uart6_hwmod = {
  *
  */
 
+static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
 static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
 	.name	= "usb_otg_ss",
+	.sysc	= &dra7xx_usb_otg_ss_sysc,
 };
 
 /* usb_otg_ss1 */

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -35,6 +35,8 @@
 #define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
 #define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
 #define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
+#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
 #define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
@@ -42,6 +44,10 @@
 #define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
 #define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
 #define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
+#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
 #define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
 #define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
 #define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)

arch/arm/mm/cache-l2x0.c

@@ -664,7 +664,7 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v
 
 static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock)
 {
-	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_PART_MASK;
+	unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK;
 	bool cortex_a9 = read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9;
 
 	if (rev >= L310_CACHE_ID_RTL_R2P0) {

arch/arm/mm/dma-mapping.c

@@ -461,12 +461,21 @@ void __init dma_contiguous_remap(void)
 		map.type = MT_MEMORY_DMA_READY;
 
 		/*
-		 * Clear previous low-memory mapping
+		 * Clear previous low-memory mapping to ensure that the
+		 * TLB does not see any conflicting entries, then flush
+		 * the TLB of the old entries before creating new mappings.
+		 *
+		 * This ensures that any speculatively loaded TLB entries
+		 * (even though they may be rare) can not cause any problems,
+		 * and ensures that this code is architecturally compliant.
 		 */
 		for (addr = __phys_to_virt(start); addr < __phys_to_virt(end);
 		     addr += PMD_SIZE)
 			pmd_clear(pmd_off_k(addr));
 
+		flush_tlb_kernel_range(__phys_to_virt(start),
+				       __phys_to_virt(end));
+
 		iotable_init(&map, 1);
 	}
 }

arch/arm/mm/idmap.c

@@ -9,6 +9,11 @@
 #include <asm/sections.h>
 #include <asm/system_info.h>
 
+/*
+ * Note: accesses outside of the kernel image and the identity map area
+ * are not supported on any CPU using the idmap tables as its current
+ * page tables.
+ */
 pgd_t *idmap_pgd;
 phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
 
@@ -25,6 +30,13 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
 			pr_warning("Failed to allocate identity pmd.\n");
 			return;
 		}
+		/*
+		 * Copy the original PMD to ensure that the PMD entries for
+		 * the kernel image are preserved.
+		 */
+		if (!pud_none(*pud))
+			memcpy(pmd, pmd_offset(pud, 0),
+			       PTRS_PER_PMD * sizeof(pmd_t));
 		pud_populate(&init_mm, pud, pmd);
 		pmd += pmd_index(addr);
 	} else

arch/arm/mm/mmu.c

@@ -1406,8 +1406,8 @@ void __init early_paging_init(const struct machine_desc *mdesc,
 		return;
 
 	/* remap kernel code and data */
-	map_start = init_mm.start_code;
-	map_end   = init_mm.brk;
+	map_start = init_mm.start_code & PMD_MASK;
+	map_end   = ALIGN(init_mm.brk, PMD_SIZE);
 
 	/* get a handle on things... */
 	pgd0 = pgd_offset_k(0);
@@ -1442,7 +1442,7 @@ void __init early_paging_init(const struct machine_desc *mdesc,
 	}
 
 	/* remap pmds for kernel mapping */
-	phys = __pa(map_start) & PMD_MASK;
+	phys = __pa(map_start);
 	do {
 		*pmdk++ = __pmd(phys | pmdprot);
 		phys += PMD_SIZE;

arch/arm/xen/grant-table.c

@@ -51,3 +51,8 @@ int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
 {
 	return -ENOSYS;
 }
+
+int arch_gnttab_init(unsigned long nr_shared, unsigned long nr_status)
+{
+	return 0;
+}

arch/arm64/Kconfig

@@ -4,6 +4,7 @@ config ARM64
 	select ARCH_HAS_OPP
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select ARCH_WANT_FRAME_POINTERS

arch/arm64/crypto/aes-glue.c

@@ -106,7 +106,7 @@ static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
 		aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_enc, rounds, blocks, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -128,7 +128,7 @@ static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
 		aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_dec, rounds, blocks, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -151,7 +151,7 @@ static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_enc, rounds, blocks, walk.iv,
 				first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -174,7 +174,7 @@ static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key_dec, rounds, blocks, walk.iv,
 				first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 	return err;
@@ -243,7 +243,7 @@ static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key1.key_enc, rounds, blocks,
 				(u8 *)ctx->key2.key_enc, walk.iv, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 
@@ -267,7 +267,7 @@ static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
 				(u8 *)ctx->key1.key_dec, rounds, blocks,
 				(u8 *)ctx->key2.key_enc, walk.iv, first);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	kernel_neon_end();
 

arch/arm64/include/asm/memory.h

@@ -56,6 +56,8 @@
 #define TASK_SIZE_32		UL(0x100000000)
 #define TASK_SIZE		(test_thread_flag(TIF_32BIT) ? \
 				TASK_SIZE_32 : TASK_SIZE_64)
+#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+				TASK_SIZE_32 : TASK_SIZE_64)
 #else
 #define TASK_SIZE		TASK_SIZE_64
 #endif /* CONFIG_COMPAT */

arch/arm64/kernel/efi-stub.c

@@ -12,8 +12,6 @@
 #include <linux/efi.h>
 #include <linux/libfdt.h>
 #include <asm/sections.h>
-#include <generated/compile.h>
-#include <generated/utsrelease.h>
 
 /*
  * AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from

arch/arm64/mm/copypage.c

@@ -27,8 +27,10 @@ void __cpu_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
 	copy_page(kto, kfrom);
 	__flush_dcache_area(kto, PAGE_SIZE);
 }
+EXPORT_SYMBOL_GPL(__cpu_copy_user_page);
 
 void __cpu_clear_user_page(void *kaddr, unsigned long vaddr)
 {
 	clear_page(kaddr);
 }
+EXPORT_SYMBOL_GPL(__cpu_clear_user_page);

arch/arm64/mm/init.c

@@ -60,6 +60,17 @@ static int __init early_initrd(char *p)
 early_param("initrd", early_initrd);
 #endif
 
+/*
+ * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
+ * currently assumes that for memory starting above 4G, 32-bit devices will
+ * use a DMA offset.
+ */
+static phys_addr_t max_zone_dma_phys(void)
+{
+	phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
+	return min(offset + (1ULL << 32), memblock_end_of_DRAM());
+}
+
 static void __init zone_sizes_init(unsigned long min, unsigned long max)
 {
 	struct memblock_region *reg;
@@ -70,9 +81,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA)) {
-		unsigned long max_dma_phys =
-			(unsigned long)(dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1);
-		max_dma = max(min, min(max, max_dma_phys >> PAGE_SHIFT));
+		max_dma = PFN_DOWN(max_zone_dma_phys());
 		zone_size[ZONE_DMA] = max_dma - min;
 	}
 	zone_size[ZONE_NORMAL] = max - max_dma;
@@ -146,7 +155,7 @@ void __init arm64_memblock_init(void)
 
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))
-		dma_phys_limit = dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1;
+		dma_phys_limit = max_zone_dma_phys();
 	dma_contiguous_reserve(dma_phys_limit);
 
 	memblock_allow_resize();

arch/blackfin/configs/BF609-EZKIT_defconfig

@@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN_V3=y
+CONFIG_SPI_ADI_V3=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set

arch/blackfin/kernel/vmlinux.lds.S

@@ -145,7 +145,7 @@ SECTIONS
 
 	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
 #else
-	.init.data : AT(__data_lma + __data_len)
+	.init.data : AT(__data_lma + __data_len + 32)
 	{
 		__sinitdata = .;
 		INIT_DATA

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -20,6 +20,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>

arch/blackfin/mach-bf537/boards/cm_bf537e.c

@@ -21,6 +21,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf537/boards/cm_bf537u.c

@@ -21,6 +21,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -21,6 +21,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -2118,7 +2118,7 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0",  "pinctrl-adi2.0", NULL, "can0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1",  "pinctrl-adi2.0", NULL, "can1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043",  "pinctrl-adi2.0", NULL, "ppi0_24b"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043",  "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0",  "pinctrl-adi2.0", NULL, "sport0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0",  "pinctrl-adi2.0", NULL, "sport0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0",  "pinctrl-adi2.0", NULL, "sport0"),
@@ -2140,7 +2140,9 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x",  "pinctrl-adi2.0", NULL, "atapi_alter"),
 #endif
 	PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0",  "pinctrl-adi2.0", NULL, "nfc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys",  "pinctrl-adi2.0", NULL, "keys_4x4"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys",  "pinctrl-adi2.0", "keys_4x4grp", "keys"),
+	PIN_MAP_MUX_GROUP("bf54x-keys", "4bit",  "pinctrl-adi2.0", "keys_4x4grp", "keys"),
+	PIN_MAP_MUX_GROUP("bf54x-keys", "8bit",  "pinctrl-adi2.0", "keys_8x8grp", "keys"),
 };
 
 static int __init ezkit_init(void)

arch/blackfin/mach-bf561/boards/acvilon.c

@@ -44,6 +44,7 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/jiffies.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/delay.h>

arch/blackfin/mach-bf561/boards/cm_bf561.c

@@ -18,6 +18,7 @@
 #endif
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -14,6 +14,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/delay.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>

arch/blackfin/mach-bf609/boards/ezkit.c

@@ -698,8 +698,6 @@ int bf609_nor_flash_init(struct platform_device *pdev)
 {
 #define CONFIG_SMC_GCTL_VAL     0x00000010
 
-	if (!devm_pinctrl_get_select_default(&pdev->dev))
-		return -EBUSY;
 	bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL);
 	bfin_write32(SMC_B0CTL, 0x01002011);
 	bfin_write32(SMC_B0TIM, 0x08170977);
@@ -709,7 +707,6 @@ int bf609_nor_flash_init(struct platform_device *pdev)
 
 void bf609_nor_flash_exit(struct platform_device *pdev)
 {
-	devm_pinctrl_put(pdev->dev.pins->p);
 	bfin_write32(SMC_GCTL, 0);
 }
 
@@ -2058,15 +2055,14 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary",  "pinctrl-adi2.0", NULL, "rotary"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0",  "pinctrl-adi2.0", NULL, "can0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0",  "pinctrl-adi2.0", NULL, "smc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2",  "pinctrl-adi2.0", NULL, "ppi2_16b"),
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0",  "pinctrl-adi2.0", NULL, "ppi0_16b"),
-#if IS_ENABLED(CONFIG_VIDEO_MT9M114)
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", NULL, "ppi0_8b"),
-#elif IS_ENABLED(CONFIG_VIDEO_VS6624)
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", NULL, "ppi0_16b"),
-#else
-	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", NULL, "ppi0_24b"),
-#endif
+	PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2",  "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP("bfin_display.0", "8bit",  "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0",  "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP("bfin_display.0", "16bit",  "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
+	PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit",  "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0",  "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit",  "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
+	PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit",  "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0",  "pinctrl-adi2.0", NULL, "sport0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0",  "pinctrl-adi2.0", NULL, "sport0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1",  "pinctrl-adi2.0", NULL, "sport1"),

arch/blackfin/mach-bf609/include/mach/pm.h

@@ -10,6 +10,7 @@
 #define __MACH_BF609_PM_H__
 
 #include <linux/suspend.h>
+#include <linux/platform_device.h>
 
 extern int bfin609_pm_enter(suspend_state_t state);
 extern int bf609_pm_prepare(void);
@@ -19,6 +20,6 @@ void bf609_hibernate(void);
 void bfin_sec_raise_irq(unsigned int sid);
 void coreb_enable(void);
 
-int bf609_nor_flash_init(void);
-void bf609_nor_flash_exit(void);
+int bf609_nor_flash_init(struct platform_device *pdev);
+void bf609_nor_flash_exit(struct platform_device *pdev);
 #endif

arch/blackfin/mach-bf609/pm.c

@@ -291,13 +291,13 @@ static struct bfin_cpu_pm_fns bf609_cpu_pm = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static int smc_pm_syscore_suspend(void)
 {
-	bf609_nor_flash_exit();
+	bf609_nor_flash_exit(NULL);
 	return 0;
 }
 
 static void smc_pm_syscore_resume(void)
 {
-	bf609_nor_flash_init();
+	bf609_nor_flash_init(NULL);
 }
 
 static struct syscore_ops smc_pm_syscore_ops = {

arch/blackfin/mach-common/ints-priority.c

@@ -1208,8 +1208,6 @@ int __init init_arch_irq(void)
 
 	bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
 
-	bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
-
 	/* Enable interrupts IVG7-15 */
 	bfin_irq_flags |= IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |

arch/m68k/kernel/head.S

@@ -921,7 +921,8 @@ L(nocon):
 	jls	1f
 	lsrl	#1,%d1
 1:
-	movel	%d1,m68k_init_mapped_size
+	lea	%pc@(m68k_init_mapped_size),%a0
+	movel	%d1,%a0@
 	mmu_map	#PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\
 		%pc@(m68k_supervisor_cachemode)
 

arch/m68k/kernel/time.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -30,6 +31,7 @@
 
 
 unsigned long (*mach_random_get_entropy)(void);
+EXPORT_SYMBOL_GPL(mach_random_get_entropy);
 
 
 /*

arch/parisc/include/uapi/asm/signal.h

@@ -69,8 +69,6 @@
 #define SA_NOMASK	SA_NODEFER
 #define SA_ONESHOT	SA_RESETHAND
 
-#define SA_RESTORER	0x04000000 /* obsolete -- ignored */
-
 #define MINSIGSTKSZ	2048
 #define SIGSTKSZ	8192
 

arch/parisc/kernel/hardware.c

@@ -1210,7 +1210,8 @@ static struct hp_hardware hp_hardware_list[] = {
 	{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, 
 	{HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, 
 	{HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, 
-	{HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"},
+	{HPHW_FIO, 0x076, 0x000AD, 0x0, "Crestone Peak Core RS-232"},
+	{HPHW_FIO, 0x077, 0x000AD, 0x0, "Crestone Peak Fast? Core RS-232"},
 	{HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, 
 	{HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, 
 	{HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, 

arch/parisc/kernel/sys_parisc32.c

@@ -4,6 +4,7 @@
  * Copyright (C) 2000-2001 Hewlett Packard Company
  * Copyright (C) 2000 John Marvin
  * Copyright (C) 2001 Matthew Wilcox
+ * Copyright (C) 2014 Helge Deller <deller@gmx.de>
  *
  * These routines maintain argument size conversion between 32bit and 64bit
  * environment. Based heavily on sys_ia32.c and sys_sparc32.c.
@@ -11,44 +12,8 @@
 
 #include <linux/compat.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/fs.h> 
-#include <linux/mm.h> 
-#include <linux/file.h> 
-#include <linux/signal.h>
-#include <linux/resource.h>
-#include <linux/times.h>
-#include <linux/time.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/shm.h>
-#include <linux/slab.h>
-#include <linux/uio.h>
-#include <linux/ncp_fs.h>
-#include <linux/poll.h>
-#include <linux/personality.h>
-#include <linux/stat.h>
-#include <linux/highmem.h>
-#include <linux/highuid.h>
-#include <linux/mman.h>
-#include <linux/binfmts.h>
-#include <linux/namei.h>
-#include <linux/vfs.h>
-#include <linux/ptrace.h>
-#include <linux/swap.h>
 #include <linux/syscalls.h>
 
-#include <asm/types.h>
-#include <asm/uaccess.h>
-#include <asm/mmu_context.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x)	printk x
-#else
-#define DBG(x)
-#endif
 
 asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23,
 	int r22, int r21, int r20)
@@ -57,3 +22,12 @@ asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23,
     	current->comm, current->pid, r20);
     return -ENOSYS;
 }
+
+asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags,
+	compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd,
+	const char  __user * pathname)
+{
+	return sys_fanotify_mark(fanotify_fd, flags,
+			((__u64)mask1 << 32) | mask0,
+			 dfd, pathname);
+}

arch/parisc/kernel/syscall_table.S

@@ -418,7 +418,7 @@
 	ENTRY_SAME(accept4)		/* 320 */
 	ENTRY_SAME(prlimit64)
 	ENTRY_SAME(fanotify_init)
-	ENTRY_COMP(fanotify_mark)
+	ENTRY_DIFF(fanotify_mark)
 	ENTRY_COMP(clock_adjtime)
 	ENTRY_SAME(name_to_handle_at)	/* 325 */
 	ENTRY_COMP(open_by_handle_at)

arch/parisc/mm/init.c

@@ -728,7 +728,6 @@ static void __init pagetable_init(void)
 #endif
 
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 }
 
 static void __init gateway_init(void)