dt-bindings: net: marvell-pp2: update interrupt-names with TX interrupts

The PPv2.2 unit has several interrupts used for TX completion
notification. This commit updates the Device Tree binding describing
this HW block to mention such interrupts.

While at it, we update the example to use a recent Device Tree
example, that uses interrupts going through the ICU, and not to the
GIC directly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/marvell-pp2.txt

@@ -41,6 +41,10 @@ Optional properties (port):
 - marvell,loopback: port is loopback mode
 - phy: a phandle to a phy node defining the PHY address (as the reg
   property, a single integer).
+- interrupt-names: if more than a single interrupt for rx is given, must
+                   be the name associated to the interrupts listed. Valid
+                   names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3",
+		   "rx-shared".
 
 Example for marvell,armada-375-pp2:
 
@@ -80,19 +84,37 @@ cpm_ethernet: ethernet@0 {
 	clock-names = "pp_clk", "gop_clk", "gp_clk";
 
 	eth0: eth0 {
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+				  "tx-cpu3", "rx-shared";
 		port-id = <0>;
 		gop-port-id = <0>;
 	};
 
 	eth1: eth1 {
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+				  "tx-cpu3", "rx-shared";
 		port-id = <1>;
 		gop-port-id = <2>;
 	};
 
 	eth2: eth2 {
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+				  "tx-cpu3", "rx-shared";
 		port-id = <2>;
 		gop-port-id = <3>;
 	};