Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

drivers/bluetooth/ath3k.c

@@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0) },
 	{ USB_DEVICE(0x0CF3, 0x0036) },
 	{ USB_DEVICE(0x0CF3, 0x3004) },
-	{ USB_DEVICE(0x0CF3, 0x3005) },
 	{ USB_DEVICE(0x0CF3, 0x3008) },
 	{ USB_DEVICE(0x0CF3, 0x311D) },
 	{ USB_DEVICE(0x0CF3, 0x311E) },
@@ -140,7 +139,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -162,7 +162,6 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/hci_h5.c

@@ -406,6 +406,7 @@ static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c)
 	    H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
 		BT_ERR("Non-link packet received in non-active state");
 		h5_reset_rx(h5);
+		return 0;
 	}
 
 	h5->rx_func = h5_rx_payload;

drivers/net/wireless/ath/ath10k/core.c

@@ -795,7 +795,11 @@ int ath10k_core_start(struct ath10k *ar)
 	if (status)
 		goto err_htc_stop;
 
-	ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+	if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+		ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1;
+	else
+		ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+
 	INIT_LIST_HEAD(&ar->arvifs);
 
 	if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -312,7 +312,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 	int msdu_len, msdu_chaining = 0;
 	struct sk_buff *msdu;
 	struct htt_rx_desc *rx_desc;
-	bool corrupted = false;
 
 	lockdep_assert_held(&htt->rx_ring.lock);
 
@@ -439,9 +438,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 		last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
 				RX_MSDU_END_INFO0_LAST_MSDU;
 
-		if (msdu_chaining && !last_msdu)
-			corrupted = true;
-
 		if (last_msdu) {
 			msdu->next = NULL;
 			break;
@@ -456,20 +452,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
 	if (*head_msdu == NULL)
 		msdu_chaining = -1;
 
-	/*
-	 * Apparently FW sometimes reports weird chained MSDU sequences with
-	 * more than one rx descriptor. This seems like a bug but needs more
-	 * analyzing. For the time being fix it by dropping such sequences to
-	 * avoid blowing up the host system.
-	 */
-	if (corrupted) {
-		ath10k_warn("failed to pop chained msdus, dropping\n");
-		ath10k_htt_rx_free_msdu_chain(*head_msdu);
-		*head_msdu = NULL;
-		*tail_msdu = NULL;
-		msdu_chaining = -EINVAL;
-	}
-
 	/*
 	 * Don't refill the ring yet.
 	 *

drivers/net/wireless/b43/Kconfig

@@ -36,7 +36,7 @@ config B43_SSB
 choice
 	prompt "Supported bus types"
 	depends on B43
-	default B43_BCMA_AND_SSB
+	default B43_BUSES_BCMA_AND_SSB
 
 config B43_BUSES_BCMA_AND_SSB
 	bool "BCMA and SSB"

drivers/net/wireless/b43/main.c

@@ -5250,6 +5250,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 	/* We don't support 5 GHz on some PHYs yet */
 	switch (dev->phy.type) {
 	case B43_PHYTYPE_A:
+	case B43_PHYTYPE_G:
 	case B43_PHYTYPE_N:
 	case B43_PHYTYPE_LP:
 	case B43_PHYTYPE_HT:

drivers/net/wireless/b43/xmit.c

@@ -811,9 +811,13 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		break;
 	case B43_PHYTYPE_G:
 		status.band = IEEE80211_BAND_2GHZ;
-		/* chanid is the radio channel cookie value as used
-		 * to tune the radio. */
-		status.freq = chanid + 2400;
+		/* Somewhere between 478.104 and 508.1084 firmware for G-PHY
+		 * has been modified to be compatible with N-PHY and others.
+		 */
+		if (dev->fw.rev >= 508)
+			status.freq = ieee80211_channel_to_frequency(chanid, status.band);
+		else
+			status.freq = chanid + 2400;
 		break;
 	case B43_PHYTYPE_N:
 	case B43_PHYTYPE_LP:

drivers/net/wireless/brcm80211/brcmfmac/usb.c

@@ -1183,8 +1183,6 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	bus->bus_priv.usb = bus_pub;
 	dev_set_drvdata(dev, bus);
 	bus->ops = &brcmf_usb_bus_ops;
-	bus->chip = bus_pub->devid;
-	bus->chiprev = bus_pub->chiprev;
 	bus->proto_type = BRCMF_PROTO_BCDC;
 	bus->always_use_fws_queue = true;
 
@@ -1193,6 +1191,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 		if (ret)
 			goto fail;
 	}
+	bus->chip = bus_pub->devid;
+	bus->chiprev = bus_pub->chiprev;
+
 	/* request firmware here */
 	brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
 			       brcmf_usb_probe_phase2);

drivers/net/wireless/mwifiex/11n_aggr.c

@@ -185,6 +185,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 	skb_reserve(skb_aggr, headroom + sizeof(struct txpd));
 	tx_info_aggr =  MWIFIEX_SKB_TXCB(skb_aggr);
 
+	memset(tx_info_aggr, 0, sizeof(*tx_info_aggr));
 	tx_info_aggr->bss_type = tx_info_src->bss_type;
 	tx_info_aggr->bss_num = tx_info_src->bss_num;
 

drivers/net/wireless/mwifiex/cfg80211.c

@@ -188,6 +188,7 @@ mwifiex_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev,
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->pkt_len = pkt_len;

drivers/net/wireless/mwifiex/cmdevt.c

@@ -462,6 +462,7 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 
 	if (skb) {
 		rx_info = MWIFIEX_SKB_RXCB(skb);
+		memset(rx_info, 0, sizeof(*rx_info));
 		rx_info->bss_num = priv->bss_num;
 		rx_info->bss_type = priv->bss_type;
 	}

drivers/net/wireless/mwifiex/main.c

@@ -644,6 +644,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->pkt_len = skb->len;

drivers/net/wireless/mwifiex/pcie.c

@@ -57,7 +57,7 @@ mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
 		return -1;
 	}
 	mapping.len = size;
-	memcpy(skb->cb, &mapping, sizeof(mapping));
+	mwifiex_store_mapping(skb, &mapping);
 	return 0;
 }
 
@@ -67,7 +67,7 @@ static void mwifiex_unmap_pci_memory(struct mwifiex_adapter *adapter,
 	struct pcie_service_card *card = adapter->card;
 	struct mwifiex_dma_mapping mapping;
 
-	MWIFIEX_SKB_PACB(skb, &mapping);
+	mwifiex_get_mapping(skb, &mapping);
 	pci_unmap_single(card->dev, mapping.addr, mapping.len, flags);
 }
 

drivers/net/wireless/mwifiex/sta_tx.c

@@ -150,6 +150,7 @@ int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
 		return -1;
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->pkt_len = data_len - (sizeof(struct txpd) + INTF_HEADER_LEN);

drivers/net/wireless/mwifiex/tdls.c

@@ -604,6 +604,7 @@ int mwifiex_send_tdls_data_frame(struct mwifiex_private *priv, const u8 *peer,
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 
@@ -757,6 +758,7 @@ int mwifiex_send_tdls_action_frame(struct mwifiex_private *priv, const u8 *peer,
 	skb->priority = MWIFIEX_PRIO_VI;
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;

drivers/net/wireless/mwifiex/txrx.c

@@ -55,6 +55,7 @@ int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter,
 		return -1;
 	}
 
+	memset(rx_info, 0, sizeof(*rx_info));
 	rx_info->bss_num = priv->bss_num;
 	rx_info->bss_type = priv->bss_type;
 

drivers/net/wireless/mwifiex/uap_txrx.c

@@ -174,6 +174,7 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,
 	}
 
 	tx_info = MWIFIEX_SKB_TXCB(skb);
+	memset(tx_info, 0, sizeof(*tx_info));
 	tx_info->bss_num = priv->bss_num;
 	tx_info->bss_type = priv->bss_type;
 	tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;

drivers/net/wireless/mwifiex/util.h

@@ -20,32 +20,55 @@
 #ifndef _MWIFIEX_UTIL_H_
 #define _MWIFIEX_UTIL_H_
 
+struct mwifiex_dma_mapping {
+	dma_addr_t addr;
+	size_t len;
+};
+
+struct mwifiex_cb {
+	struct mwifiex_dma_mapping dma_mapping;
+	union {
+		struct mwifiex_rxinfo rx_info;
+		struct mwifiex_txinfo tx_info;
+	};
+};
+
 static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb)
 {
-	return (struct mwifiex_rxinfo *)(skb->cb + sizeof(dma_addr_t));
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	BUILD_BUG_ON(sizeof(struct mwifiex_cb) > sizeof(skb->cb));
+	return &cb->rx_info;
 }
 
 static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb)
 {
-	return (struct mwifiex_txinfo *)(skb->cb + sizeof(dma_addr_t));
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	return &cb->tx_info;
 }
 
-struct mwifiex_dma_mapping {
-	dma_addr_t addr;
-	size_t len;
-};
+static inline void mwifiex_store_mapping(struct sk_buff *skb,
+					 struct mwifiex_dma_mapping *mapping)
+{
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	memcpy(&cb->dma_mapping, mapping, sizeof(*mapping));
+}
 
-static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb,
-					struct mwifiex_dma_mapping *mapping)
+static inline void mwifiex_get_mapping(struct sk_buff *skb,
+				       struct mwifiex_dma_mapping *mapping)
 {
-	memcpy(mapping, skb->cb, sizeof(*mapping));
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	memcpy(mapping, &cb->dma_mapping, sizeof(*mapping));
 }
 
 static inline dma_addr_t MWIFIEX_SKB_DMA_ADDR(struct sk_buff *skb)
 {
 	struct mwifiex_dma_mapping mapping;
 
-	MWIFIEX_SKB_PACB(skb, &mapping);
+	mwifiex_get_mapping(skb, &mapping);
 
 	return mapping.addr;
 }

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -1681,8 +1681,13 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) {
 		__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
+		/*
+		 * On this device RFKILL initialized during probe does not work.
+		 */
+		__set_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags);
+	}
 
 	/*
 	 * Check if the BBP tuning should be enabled.

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -229,6 +229,31 @@ static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
 /*
  * Firmware functions
  */
+static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
+{
+	__le32 *reg;
+	u32 fw_mode;
+
+	reg = kmalloc(sizeof(*reg), GFP_KERNEL);
+	if (reg == NULL)
+		return -ENOMEM;
+	/* cannot use rt2x00usb_register_read here as it uses different
+	 * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
+	 * magic value USB_MODE_AUTORUN (0x11) to the device, thus the
+	 * returned value would be invalid.
+	 */
+	rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
+				 USB_VENDOR_REQUEST_IN, 0, USB_MODE_AUTORUN,
+				 reg, sizeof(*reg), REGISTER_TIMEOUT_FIRMWARE);
+	fw_mode = le32_to_cpu(*reg);
+	kfree(reg);
+
+	if ((fw_mode & 0x00000003) == 2)
+		return 1;
+
+	return 0;
+}
+
 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 {
 	return FIRMWARE_RT2870;
@@ -240,6 +265,7 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 	int status;
 	u32 offset;
 	u32 length;
+	int retval;
 
 	/*
 	 * Check which section of the firmware we need.
@@ -257,8 +283,16 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Write firmware to device.
 	 */
-	rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
-				      data + offset, length);
+	retval = rt2800usb_autorun_detect(rt2x00dev);
+	if (retval < 0)
+		return retval;
+	if (retval) {
+		rt2x00_info(rt2x00dev,
+			    "Firmware loading not required - NIC in AutoRun mode\n");
+	} else {
+		rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+					      data + offset, length);
+	}
 
 	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
@@ -735,11 +769,26 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 /*
  * Device probe functions.
  */
+static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+
+	retval = rt2800usb_autorun_detect(rt2x00dev);
+	if (retval < 0)
+		return retval;
+	if (retval)
+		return 1;
+	return rt2800_efuse_detect(rt2x00dev);
+}
+
 static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
-	if (rt2800_efuse_detect(rt2x00dev))
+	retval = rt2800usb_efuse_detect(rt2x00dev);
+	if (retval < 0)
+		return retval;
+	if (retval)
 		retval = rt2800_read_eeprom_efuse(rt2x00dev);
 	else
 		retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,

drivers/net/wireless/rt2x00/rt2x00.h

@@ -693,6 +693,7 @@ enum rt2x00_capability_flags {
 	REQUIRE_SW_SEQNO,
 	REQUIRE_HT_TX_DESC,
 	REQUIRE_PS_AUTOWAKE,
+	REQUIRE_DELAYED_RFKILL,
 
 	/*
 	 * Capabilities

drivers/net/wireless/rt2x00/rt2x00dev.c

@@ -1129,9 +1129,10 @@ static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
 		return;
 
 	/*
-	 * Unregister extra components.
+	 * Stop rfkill polling.
 	 */
-	rt2x00rfkill_unregister(rt2x00dev);
+	if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_unregister(rt2x00dev);
 
 	/*
 	 * Allow the HW to uninitialize.
@@ -1169,6 +1170,12 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
 
 	set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
 
+	/*
+	 * Start rfkill polling.
+	 */
+	if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_register(rt2x00dev);
+
 	return 0;
 }
 
@@ -1378,7 +1385,12 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	rt2x00link_register(rt2x00dev);
 	rt2x00leds_register(rt2x00dev);
 	rt2x00debug_register(rt2x00dev);
-	rt2x00rfkill_register(rt2x00dev);
+
+	/*
+	 * Start rfkill polling.
+	 */
+	if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_register(rt2x00dev);
 
 	return 0;
 
@@ -1393,6 +1405,12 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 {
 	clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 
+	/*
+	 * Stop rfkill polling.
+	 */
+	if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_unregister(rt2x00dev);
+
 	/*
 	 * Disable radio.
 	 */

drivers/net/wireless/rt2x00/rt2x00mac.c

@@ -487,6 +487,8 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	crypto.cipher = rt2x00crypto_key_to_cipher(key);
 	if (crypto.cipher == CIPHER_NONE)
 		return -EOPNOTSUPP;
+	if (crypto.cipher == CIPHER_TKIP && rt2x00_is_usb(rt2x00dev))
+		return -EOPNOTSUPP;
 
 	crypto.cmd = cmd;
 

drivers/net/wireless/rt2x00/rt2x00usb.h

@@ -93,6 +93,7 @@ enum rt2x00usb_mode_offset {
 	USB_MODE_SLEEP = 7,	/* RT73USB */
 	USB_MODE_FIRMWARE = 8,	/* RT73USB */
 	USB_MODE_WAKEUP = 9,	/* RT73USB */
+	USB_MODE_AUTORUN = 17, /* RT2800USB */
 };
 
 /**

net/bluetooth/hci_conn.c

@@ -289,10 +289,20 @@ static void hci_conn_timeout(struct work_struct *work)
 {
 	struct hci_conn *conn = container_of(work, struct hci_conn,
 					     disc_work.work);
+	int refcnt = atomic_read(&conn->refcnt);
 
 	BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 
-	if (atomic_read(&conn->refcnt))
+	WARN_ON(refcnt < 0);
+
+	/* FIXME: It was observed that in pairing failed scenario, refcnt
+	 * drops below 0. Probably this is because l2cap_conn_del calls
+	 * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
+	 * dropped. After that loop hci_chan_del is called which also drops
+	 * conn. For now make sure that ACL is alive if refcnt is higher then 0,
+	 * otherwise drop it.
+	 */
+	if (refcnt > 0)
 		return;
 
 	switch (conn->state) {
@@ -610,11 +620,6 @@ static void hci_req_add_le_create_conn(struct hci_request *req,
 	if (hci_update_random_address(req, false, &own_addr_type))
 		return;
 
-	/* Save the address type used for this connnection attempt so we able
-	 * to retrieve this information if we need it.
-	 */
-	conn->src_type = own_addr_type;
-
 	cp.scan_interval = cpu_to_le16(hdev->le_scan_interval);
 	cp.scan_window = cpu_to_le16(hdev->le_scan_window);
 	bacpy(&cp.peer_addr, &conn->dst);
@@ -894,7 +899,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
 		/* If we're already encrypted set the REAUTH_PEND flag,
 		 * otherwise set the ENCRYPT_PEND.
 		 */
-		if (conn->key_type != 0xff)
+		if (conn->link_mode & HCI_LM_ENCRYPT)
 			set_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
 		else
 			set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);

net/bluetooth/hci_event.c

@@ -48,6 +48,10 @@ static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
 	smp_mb__after_atomic(); /* wake_up_bit advises about this barrier */
 	wake_up_bit(&hdev->flags, HCI_INQUIRY);
 
+	hci_dev_lock(hdev);
+	hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+	hci_dev_unlock(hdev);
+
 	hci_conn_check_pending(hdev);
 }
 
@@ -3537,7 +3541,11 @@ static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
 			cp.authentication = conn->auth_type;
 
 			/* Request MITM protection if our IO caps allow it
-			 * except for the no-bonding case
+			 * except for the no-bonding case.
+			 * conn->auth_type is not updated here since
+			 * that might cause the user confirmation to be
+			 * rejected in case the remote doesn't have the
+			 * IO capabilities for MITM.
 			 */
 			if (conn->io_capability != HCI_IO_NO_INPUT_OUTPUT &&
 			    cp.authentication != HCI_AT_NO_BONDING)
@@ -3628,8 +3636,11 @@ static void hci_user_confirm_request_evt(struct hci_dev *hdev,
 
 		/* If we're not the initiators request authorization to
 		 * proceed from user space (mgmt_user_confirm with
-		 * confirm_hint set to 1). */
-		if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
+		 * confirm_hint set to 1). The exception is if neither
+		 * side had MITM in which case we do auto-accept.
+		 */
+		if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) &&
+		    (loc_mitm || rem_mitm)) {
 			BT_DBG("Confirming auto-accept as acceptor");
 			confirm_hint = 1;
 			goto confirm;

net/bluetooth/l2cap_core.c

@@ -1663,7 +1663,13 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err)
 	kfree_skb(conn->rx_skb);
 
 	skb_queue_purge(&conn->pending_rx);
-	flush_work(&conn->pending_rx_work);
+
+	/* We can not call flush_work(&conn->pending_rx_work) here since we
+	 * might block if we are running on a worker from the same workqueue
+	 * pending_rx_work is waiting on.
+	 */
+	if (work_pending(&conn->pending_rx_work))
+		cancel_work_sync(&conn->pending_rx_work);
 
 	l2cap_unregister_all_users(conn);
 

net/bluetooth/l2cap_sock.c

@@ -787,11 +787,6 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 
 		/*change security for LE channels */
 		if (chan->scid == L2CAP_CID_ATT) {
-			if (!conn->hcon->out) {
-				err = -EINVAL;
-				break;
-			}
-
 			if (smp_conn_security(conn->hcon, sec.level))
 				break;
 			sk->sk_state = BT_CONFIG;

net/bluetooth/mgmt.c

@@ -1047,6 +1047,43 @@ static void clean_up_hci_complete(struct hci_dev *hdev, u8 status)
 	}
 }
 
+static void hci_stop_discovery(struct hci_request *req)
+{
+	struct hci_dev *hdev = req->hdev;
+	struct hci_cp_remote_name_req_cancel cp;
+	struct inquiry_entry *e;
+
+	switch (hdev->discovery.state) {
+	case DISCOVERY_FINDING:
+		if (test_bit(HCI_INQUIRY, &hdev->flags)) {
+			hci_req_add(req, HCI_OP_INQUIRY_CANCEL, 0, NULL);
+		} else {
+			cancel_delayed_work(&hdev->le_scan_disable);
+			hci_req_add_le_scan_disable(req);
+		}
+
+		break;
+
+	case DISCOVERY_RESOLVING:
+		e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY,
+						     NAME_PENDING);
+		if (!e)
+			return;
+
+		bacpy(&cp.bdaddr, &e->data.bdaddr);
+		hci_req_add(req, HCI_OP_REMOTE_NAME_REQ_CANCEL, sizeof(cp),
+			    &cp);
+
+		break;
+
+	default:
+		/* Passive scanning */
+		if (test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+			hci_req_add_le_scan_disable(req);
+		break;
+	}
+}
+
 static int clean_up_hci_state(struct hci_dev *hdev)
 {
 	struct hci_request req;
@@ -1063,9 +1100,7 @@ static int clean_up_hci_state(struct hci_dev *hdev)
 	if (test_bit(HCI_ADVERTISING, &hdev->dev_flags))
 		disable_advertising(&req);
 
-	if (test_bit(HCI_LE_SCAN, &hdev->dev_flags)) {
-		hci_req_add_le_scan_disable(&req);
-	}
+	hci_stop_discovery(&req);
 
 	list_for_each_entry(conn, &hdev->conn_hash.list, list) {
 		struct hci_cp_disconnect dc;
@@ -2996,8 +3031,13 @@ static int user_pairing_resp(struct sock *sk, struct hci_dev *hdev,
 	}
 
 	if (addr->type == BDADDR_LE_PUBLIC || addr->type == BDADDR_LE_RANDOM) {
-		/* Continue with pairing via SMP */
+		/* Continue with pairing via SMP. The hdev lock must be
+		 * released as SMP may try to recquire it for crypto
+		 * purposes.
+		 */
+		hci_dev_unlock(hdev);
 		err = smp_user_confirm_reply(conn, mgmt_op, passkey);
+		hci_dev_lock(hdev);
 
 		if (!err)
 			err = cmd_complete(sk, hdev->id, mgmt_op,
@@ -3574,8 +3614,6 @@ static int stop_discovery(struct sock *sk, struct hci_dev *hdev, void *data,
 {
 	struct mgmt_cp_stop_discovery *mgmt_cp = data;
 	struct pending_cmd *cmd;
-	struct hci_cp_remote_name_req_cancel cp;
-	struct inquiry_entry *e;
 	struct hci_request req;
 	int err;
 
@@ -3605,52 +3643,22 @@ static int stop_discovery(struct sock *sk, struct hci_dev *hdev, void *data,
 
 	hci_req_init(&req, hdev);
 
-	switch (hdev->discovery.state) {
-	case DISCOVERY_FINDING:
-		if (test_bit(HCI_INQUIRY, &hdev->flags)) {
-			hci_req_add(&req, HCI_OP_INQUIRY_CANCEL, 0, NULL);
-		} else {
-			cancel_delayed_work(&hdev->le_scan_disable);
-
-			hci_req_add_le_scan_disable(&req);
-		}
-
-		break;
+	hci_stop_discovery(&req);
 
-	case DISCOVERY_RESOLVING:
-		e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY,
-						     NAME_PENDING);
-		if (!e) {
-			mgmt_pending_remove(cmd);
-			err = cmd_complete(sk, hdev->id,
-					   MGMT_OP_STOP_DISCOVERY, 0,
-					   &mgmt_cp->type,
-					   sizeof(mgmt_cp->type));
-			hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
-			goto unlock;
-		}
-
-		bacpy(&cp.bdaddr, &e->data.bdaddr);
-		hci_req_add(&req, HCI_OP_REMOTE_NAME_REQ_CANCEL, sizeof(cp),
-			    &cp);
-
-		break;
-
-	default:
-		BT_DBG("unknown discovery state %u", hdev->discovery.state);
-
-		mgmt_pending_remove(cmd);
-		err = cmd_complete(sk, hdev->id, MGMT_OP_STOP_DISCOVERY,
-				   MGMT_STATUS_FAILED, &mgmt_cp->type,
-				   sizeof(mgmt_cp->type));
+	err = hci_req_run(&req, stop_discovery_complete);
+	if (!err) {
+		hci_discovery_set_state(hdev, DISCOVERY_STOPPING);
 		goto unlock;
 	}
 
-	err = hci_req_run(&req, stop_discovery_complete);
-	if (err < 0)
-		mgmt_pending_remove(cmd);
-	else
-		hci_discovery_set_state(hdev, DISCOVERY_STOPPING);
+	mgmt_pending_remove(cmd);
+
+	/* If no HCI commands were sent we're done */
+	if (err == -ENODATA) {
+		err = cmd_complete(sk, hdev->id, MGMT_OP_STOP_DISCOVERY, 0,
+				   &mgmt_cp->type, sizeof(mgmt_cp->type));
+		hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+	}
 
 unlock:
 	hci_dev_unlock(hdev);

net/bluetooth/smp.c

@@ -385,6 +385,16 @@ static const u8 gen_method[5][5] = {
 	{ CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP     },
 };
 
+static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io)
+{
+	/* If either side has unknown io_caps, use JUST WORKS */
+	if (local_io > SMP_IO_KEYBOARD_DISPLAY ||
+	    remote_io > SMP_IO_KEYBOARD_DISPLAY)
+		return JUST_WORKS;
+
+	return gen_method[remote_io][local_io];
+}
+
 static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
 						u8 local_io, u8 remote_io)
 {
@@ -401,14 +411,11 @@ static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
 	BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io);
 
 	/* If neither side wants MITM, use JUST WORKS */
-	/* If either side has unknown io_caps, use JUST WORKS */
 	/* Otherwise, look up method from the table */
-	if (!(auth & SMP_AUTH_MITM) ||
-	    local_io > SMP_IO_KEYBOARD_DISPLAY ||
-	    remote_io > SMP_IO_KEYBOARD_DISPLAY)
+	if (!(auth & SMP_AUTH_MITM))
 		method = JUST_WORKS;
 	else
-		method = gen_method[remote_io][local_io];
+		method = get_auth_method(smp, local_io, remote_io);
 
 	/* If not bonding, don't ask user to confirm a Zero TK */
 	if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM)
@@ -544,7 +551,7 @@ static u8 smp_random(struct smp_chan *smp)
 		hci_le_start_enc(hcon, ediv, rand, stk);
 		hcon->enc_key_size = smp->enc_key_size;
 	} else {
-		u8 stk[16];
+		u8 stk[16], auth;
 		__le64 rand = 0;
 		__le16 ediv = 0;
 
@@ -556,8 +563,13 @@ static u8 smp_random(struct smp_chan *smp)
 		memset(stk + smp->enc_key_size, 0,
 		       SMP_MAX_ENC_KEY_SIZE - smp->enc_key_size);
 
+		if (hcon->pending_sec_level == BT_SECURITY_HIGH)
+			auth = 1;
+		else
+			auth = 0;
+
 		hci_add_ltk(hcon->hdev, &hcon->dst, hcon->dst_type,
-			    HCI_SMP_STK_SLAVE, 0, stk, smp->enc_key_size,
+			    HCI_SMP_STK_SLAVE, auth, stk, smp->enc_key_size,
 			    ediv, rand);
 	}
 
@@ -664,7 +676,7 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb)
 {
 	struct smp_cmd_pairing rsp, *req = (void *) skb->data;
 	struct smp_chan *smp;
-	u8 key_size, auth;
+	u8 key_size, auth, sec_level;
 	int ret;
 
 	BT_DBG("conn %p", conn);
@@ -690,7 +702,19 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb)
 	/* We didn't start the pairing, so match remote */
 	auth = req->auth_req;
 
-	conn->hcon->pending_sec_level = authreq_to_seclevel(auth);
+	sec_level = authreq_to_seclevel(auth);
+	if (sec_level > conn->hcon->pending_sec_level)
+		conn->hcon->pending_sec_level = sec_level;
+
+	/* If we need MITM check that it can be acheived */
+	if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+		u8 method;
+
+		method = get_auth_method(smp, conn->hcon->io_capability,
+					 req->io_capability);
+		if (method == JUST_WORKS || method == JUST_CFM)
+			return SMP_AUTH_REQUIREMENTS;
+	}
 
 	build_pairing_cmd(conn, req, &rsp, auth);
 
@@ -738,6 +762,16 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, struct sk_buff *skb)
 	if (check_enc_key_size(conn, key_size))
 		return SMP_ENC_KEY_SIZE;
 
+	/* If we need MITM check that it can be acheived */
+	if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+		u8 method;
+
+		method = get_auth_method(smp, req->io_capability,
+					 rsp->io_capability);
+		if (method == JUST_WORKS || method == JUST_CFM)
+			return SMP_AUTH_REQUIREMENTS;
+	}
+
 	get_random_bytes(smp->prnd, sizeof(smp->prnd));
 
 	smp->prsp[0] = SMP_CMD_PAIRING_RSP;
@@ -833,6 +867,7 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb)
 	struct smp_cmd_pairing cp;
 	struct hci_conn *hcon = conn->hcon;
 	struct smp_chan *smp;
+	u8 sec_level;
 
 	BT_DBG("conn %p", conn);
 
@@ -842,7 +877,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb)
 	if (!(conn->hcon->link_mode & HCI_LM_MASTER))
 		return SMP_CMD_NOTSUPP;
 
-	hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
+	sec_level = authreq_to_seclevel(rp->auth_req);
+	if (sec_level > hcon->pending_sec_level)
+		hcon->pending_sec_level = sec_level;
 
 	if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
 		return 0;
@@ -896,9 +933,12 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
 	if (smp_sufficient_security(hcon, sec_level))
 		return 1;
 
+	if (sec_level > hcon->pending_sec_level)
+		hcon->pending_sec_level = sec_level;
+
 	if (hcon->link_mode & HCI_LM_MASTER)
-		if (smp_ltk_encrypt(conn, sec_level))
-			goto done;
+		if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
+			return 0;
 
 	if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
 		return 0;
@@ -913,7 +953,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
 	 * requires it.
 	 */
 	if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
-	    sec_level > BT_SECURITY_MEDIUM)
+	    hcon->pending_sec_level > BT_SECURITY_MEDIUM)
 		authreq |= SMP_AUTH_MITM;
 
 	if (hcon->link_mode & HCI_LM_MASTER) {
@@ -932,9 +972,6 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
 
 	set_bit(SMP_FLAG_INITIATOR, &smp->flags);
 
-done:
-	hcon->pending_sec_level = sec_level;
-
 	return 0;
 }
 

net/mac80211/util.c

@@ -1150,11 +1150,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 	int err;
 
 	/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
-	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+			    24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
 	if (!skb)
 		return;
 
-	skb_reserve(skb, local->hw.extra_tx_headroom);
+	skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
 
 	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
 	memset(mgmt, 0, 24 + 6);

net/wireless/core.h

@@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start)
 	if (end >= start)
 		return jiffies_to_msecs(end - start);
 
-	return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+	return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
 }
 
 void

net/wireless/nl80211.c

@@ -1498,18 +1498,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		}
 		CMD(start_p2p_device, START_P2P_DEVICE);
 		CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+		CMD(testmode_cmd, TESTMODE);
+#endif
 		if (state->split) {
 			CMD(crit_proto_start, CRIT_PROTOCOL_START);
 			CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
 			if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
 				CMD(channel_switch, CHANNEL_SWITCH);
+			CMD(set_qos_map, SET_QOS_MAP);
 		}
-		CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
-		CMD(testmode_cmd, TESTMODE);
-#endif
-
+		/* add into the if now */
 #undef CMD
 
 		if (rdev->ops->connect || rdev->ops->auth) {

net/wireless/reg.c

@@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq,
 		if (!band_rule_found)
 			band_rule_found = freq_in_rule_band(fr, center_freq);
 
-		bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+		bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
 
 		if (band_rule_found && bw_fits)
 			return rr;
@@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd,
 }
 #endif
 
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
  */
 static void handle_channel(struct wiphy *wiphy,
 			   enum nl80211_reg_initiator initiator,
@@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy,
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags = IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
 		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
@@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
 	if (reg_rule->flags & NL80211_RRF_AUTO_BW)
 		max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags = IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
+		bw_flags = IEEE80211_CHAN_NO_HT40;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
 		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 	if (max_bandwidth_khz < MHZ_TO_KHZ(160))