Merge 3.13-rc5 into staging-next

We want these fixes here to handle some merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CREDITS

@@ -655,6 +655,11 @@ S: Stanford University
 S: Stanford, California 94305
 S: USA
 
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
 format. For the single-planar API, applications must set <structfield> plane
 </structfield> to zero.  Additional flags may be posted in the <structfield>
 flags </structfield> field.  Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported.  All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported.  All
+other fields must be set to zero.
 In the case of multi-planar API, every plane is exported separately using
 multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
 
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>flags</structfield></entry>
 	    <entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
-details.</entry>
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
 	  </row>
 	  <row>
 	    <entry>__s32</entry>

Documentation/assoc_array.txt

@@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
 
  (4) Diff the index keys of two objects.
 
-	int (*diff_objects)(const void *a, const void *b);
+	int (*diff_objects)(const void *object, const void *index_key);
 
-     Return the bit position at which the index keys of two objects differ or
-     -1 if they are the same.
+     Return the bit position at which the index key of the specified object
+     differs from the given index key or -1 if they are the same.
 
 
  (5) Free an object.

Documentation/device-mapper/cache.txt

@@ -266,10 +266,12 @@ E.g.
 Invalidation is removing an entry from the cache without writing it
 back.  Cache blocks can be invalidated via the invalidate_cblocks
 message, which takes an arbitrary number of cblock ranges.  Each cblock
-must be expressed as a decimal value, in the future a variant message
-that takes cblock ranges expressed in hexidecimal may be needed to
-better support efficient invalidation of larger caches.  The cache must
-be in passthrough mode when invalidate_cblocks is used.
+range's end value is "one past the end", meaning 5-10 expresses a range
+of values from 5 to 9.  Each cblock must be expressed as a decimal
+value, in the future a variant message that takes cblock ranges
+expressed in hexidecimal may be needed to better support efficient
+invalidation of larger caches.  The cache must be in passthrough mode
+when invalidate_cblocks is used.
 
    invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
 

Documentation/devicetree/bindings/net/davinci_emac.txt

@@ -4,7 +4,7 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac";
+- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register

Documentation/devicetree/bindings/net/smsc-lan91c111.txt

@@ -8,3 +8,7 @@ Required properties:
 Optional properties:
 - phy-device : phandle to Ethernet phy
 - local-mac-address : Ethernet mac address to use
+- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
+  are supported on the device.  Valid value for SMSC LAN91c111 are
+  1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
+  16-bit access only.

Documentation/mic/mpssd/mpssd.c

@@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
 	int i;
 	void *dp = get_dp(mic, type);
 
-	for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+	for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
 		i += mic_total_desc_size(d)) {
 		d = dp + i;
 
@@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 		__func__, mic->name, vr0->va, vr0->info, vr_size,
 		vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 	mpsslog("magic 0x%x expected 0x%x\n",
-		vr0->info->magic, MIC_MAGIC + type);
-	assert(vr0->info->magic == MIC_MAGIC + type);
+		le32toh(vr0->info->magic), MIC_MAGIC + type);
+	assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
 	if (vr1) {
 		vr1->va = (struct mic_vring *)
 			&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 			__func__, mic->name, vr1->va, vr1->info, vr_size,
 			vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 		mpsslog("magic 0x%x expected 0x%x\n",
-			vr1->info->magic, MIC_MAGIC + type + 1);
-		assert(vr1->info->magic == MIC_MAGIC + type + 1);
+			le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
+		assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
 	}
 done:
 	return va;
@@ -520,7 +520,7 @@ static void *
 virtio_net(void *arg)
 {
 	static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
-	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
 	struct iovec vnet_iov[2][2] = {
 		{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
 		  { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@ mic_config(void *arg)
 	}
 
 	do {
+		ret = lseek(fd, 0, SEEK_SET);
+		if (ret < 0) {
+			mpsslog("%s: Failed to seek to file start '%s': %s\n",
+				mic->name, pathname, strerror(errno));
+			goto close_error1;
+		}
 		ret = read(fd, value, sizeof(value));
 		if (ret < 0) {
 			mpsslog("%s: Failed to read sysfs entry '%s': %s\n",

Documentation/module-signing.txt

@@ -0,0 +1,240 @@
+			==============================
+			KERNEL MODULE SIGNING FACILITY
+			==============================
+
+CONTENTS
+
+ - Overview.
+ - Configuring module signing.
+ - Generating signing keys.
+ - Public keys in the kernel.
+ - Manually signing modules.
+ - Signed modules and stripping.
+ - Loading signed modules.
+ - Non-valid signatures and unsigned modules.
+ - Administering/protecting the private key.
+
+
+========
+OVERVIEW
+========
+
+The kernel module signing facility cryptographically signs modules during
+installation and then checks the signature upon loading the module.  This
+allows increased kernel security by disallowing the loading of unsigned modules
+or modules signed with an invalid key.  Module signing increases security by
+making it harder to load a malicious module into the kernel.  The module
+signature checking is done by the kernel so that it is not necessary to have
+trusted userspace bits.
+
+This facility uses X.509 ITU-T standard certificates to encode the public keys
+involved.  The signatures are not themselves encoded in any industrial standard
+type.  The facility currently only supports the RSA public key encryption
+standard (though it is pluggable and permits others to be used).  The possible
+hash algorithms that can be used are SHA-1, SHA-224, SHA-256, SHA-384, and
+SHA-512 (the algorithm is selected by data in the signature).
+
+
+==========================
+CONFIGURING MODULE SIGNING
+==========================
+
+The module signing facility is enabled by going to the "Enable Loadable Module
+Support" section of the kernel configuration and turning on
+
+	CONFIG_MODULE_SIG	"Module signature verification"
+
+This has a number of options available:
+
+ (1) "Require modules to be validly signed" (CONFIG_MODULE_SIG_FORCE)
+
+     This specifies how the kernel should deal with a module that has a
+     signature for which the key is not known or a module that is unsigned.
+
+     If this is off (ie. "permissive"), then modules for which the key is not
+     available and modules that are unsigned are permitted, but the kernel will
+     be marked as being tainted.
+
+     If this is on (ie. "restrictive"), only modules that have a valid
+     signature that can be verified by a public key in the kernel's possession
+     will be loaded.  All other modules will generate an error.
+
+     Irrespective of the setting here, if the module has a signature block that
+     cannot be parsed, it will be rejected out of hand.
+
+
+ (2) "Automatically sign all modules" (CONFIG_MODULE_SIG_ALL)
+
+     If this is on then modules will be automatically signed during the
+     modules_install phase of a build.  If this is off, then the modules must
+     be signed manually using:
+
+	scripts/sign-file
+
+
+ (3) "Which hash algorithm should modules be signed with?"
+
+     This presents a choice of which hash algorithm the installation phase will
+     sign the modules with:
+
+	CONFIG_SIG_SHA1		"Sign modules with SHA-1"
+	CONFIG_SIG_SHA224	"Sign modules with SHA-224"
+	CONFIG_SIG_SHA256	"Sign modules with SHA-256"
+	CONFIG_SIG_SHA384	"Sign modules with SHA-384"
+	CONFIG_SIG_SHA512	"Sign modules with SHA-512"
+
+     The algorithm selected here will also be built into the kernel (rather
+     than being a module) so that modules signed with that algorithm can have
+     their signatures checked without causing a dependency loop.
+
+
+=======================
+GENERATING SIGNING KEYS
+=======================
+
+Cryptographic keypairs are required to generate and check signatures.  A
+private key is used to generate a signature and the corresponding public key is
+used to check it.  The private key is only needed during the build, after which
+it can be deleted or stored securely.  The public key gets built into the
+kernel so that it can be used to check the signatures as the modules are
+loaded.
+
+Under normal conditions, the kernel build will automatically generate a new
+keypair using openssl if one does not exist in the files:
+
+	signing_key.priv
+	signing_key.x509
+
+during the building of vmlinux (the public part of the key needs to be built
+into vmlinux) using parameters in the:
+
+	x509.genkey
+
+file (which is also generated if it does not already exist).
+
+It is strongly recommended that you provide your own x509.genkey file.
+
+Most notably, in the x509.genkey file, the req_distinguished_name section
+should be altered from the default:
+
+	[ req_distinguished_name ]
+	O = Magrathea
+	CN = Glacier signing key
+	emailAddress = slartibartfast@magrathea.h2g2
+
+The generated RSA key size can also be set with:
+
+	[ req ]
+	default_bits = 4096
+
+
+It is also possible to manually generate the key private/public files using the
+x509.genkey key generation configuration file in the root node of the Linux
+kernel sources tree and the openssl command.  The following is an example to
+generate the public/private key files:
+
+	openssl req -new -nodes -utf8 -sha256 -days 36500 -batch -x509 \
+	   -config x509.genkey -outform DER -out signing_key.x509 \
+	   -keyout signing_key.priv
+
+
+=========================
+PUBLIC KEYS IN THE KERNEL
+=========================
+
+The kernel contains a ring of public keys that can be viewed by root.  They're
+in a keyring called ".system_keyring" that can be seen by:
+
+	[root@deneb ~]# cat /proc/keys
+	...
+	223c7853 I------     1 perm 1f030000     0     0 keyring   .system_keyring: 1
+	302d2d52 I------     1 perm 1f010000     0     0 asymmetri Fedora kernel signing key: d69a84e6bce3d216b979e9505b3e3ef9a7118079: X509.RSA a7118079 []
+	...
+
+Beyond the public key generated specifically for module signing, any file
+placed in the kernel source root directory or the kernel build root directory
+whose name is suffixed with ".x509" will be assumed to be an X.509 public key
+and will be added to the keyring.
+
+Further, the architecture code may take public keys from a hardware store and
+add those in also (e.g. from the UEFI key database).
+
+Finally, it is possible to add additional public keys by doing:
+
+	keyctl padd asymmetric "" [.system_keyring-ID] <[key-file]
+
+e.g.:
+
+	keyctl padd asymmetric "" 0x223c7853 <my_public_key.x509
+
+Note, however, that the kernel will only permit keys to be added to
+.system_keyring _if_ the new key's X.509 wrapper is validly signed by a key
+that is already resident in the .system_keyring at the time the key was added.
+
+
+=========================
+MANUALLY SIGNING MODULES
+=========================
+
+To manually sign a module, use the scripts/sign-file tool available in
+the Linux kernel source tree.  The script requires 4 arguments:
+
+	1.  The hash algorithm (e.g., sha256)
+	2.  The private key filename
+	3.  The public key filename
+	4.  The kernel module to be signed
+
+The following is an example to sign a kernel module:
+
+	scripts/sign-file sha512 kernel-signkey.priv \
+		kernel-signkey.x509 module.ko
+
+The hash algorithm used does not have to match the one configured, but if it
+doesn't, you should make sure that hash algorithm is either built into the
+kernel or can be loaded without requiring itself.
+
+
+============================
+SIGNED MODULES AND STRIPPING
+============================
+
+A signed module has a digital signature simply appended at the end.  The string
+"~Module signature appended~." at the end of the module's file confirms that a
+signature is present but it does not confirm that the signature is valid!
+
+Signed modules are BRITTLE as the signature is outside of the defined ELF
+container.  Thus they MAY NOT be stripped once the signature is computed and
+attached.  Note the entire module is the signed payload, including any and all
+debug information present at the time of signing.
+
+
+======================
+LOADING SIGNED MODULES
+======================
+
+Modules are loaded with insmod, modprobe, init_module() or finit_module(),
+exactly as for unsigned modules as no processing is done in userspace.  The
+signature checking is all done within the kernel.
+
+
+=========================================
+NON-VALID SIGNATURES AND UNSIGNED MODULES
+=========================================
+
+If CONFIG_MODULE_SIG_FORCE is enabled or enforcemodulesig=1 is supplied on
+the kernel command line, the kernel will only load validly signed modules
+for which it has a public key.   Otherwise, it will also load modules that are
+unsigned.   Any module for which the kernel has a key, but which proves to have
+a signature mismatch will not be permitted to load.
+
+Any module that has an unparseable signature will be rejected.
+
+
+=========================================
+ADMINISTERING/PROTECTING THE PRIVATE KEY
+=========================================
+
+Since the private key is used to sign modules, viruses and malware could use
+the private key to sign modules and compromise the operating system.  The
+private key must be either destroyed or moved to a secure location and not kept
+in the root node of the kernel source tree.

Documentation/networking/ip-sysctl.txt

@@ -16,8 +16,12 @@ ip_default_ttl - INTEGER
 	Default: 64 (as recommended by RFC1700)
 
 ip_no_pmtu_disc - BOOLEAN
-	Disable Path MTU Discovery.
-	default FALSE
+	Disable Path MTU Discovery. If enabled and a
+	fragmentation-required ICMP is received, the PMTU to this
+	destination will be set to min_pmtu (see below). You will need
+	to raise min_pmtu to the smallest interface MTU on your system
+	manually if you want to avoid locally generated fragments.
+	Default: FALSE
 
 min_pmtu - INTEGER
 	default 552 - minimum discovered Path MTU

Documentation/networking/packet_mmap.txt

@@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
 [shutdown]  close() --------> destruction of the transmission socket and
                               deallocation of all associated resources.
 
+Socket creation and destruction is also straight forward, and is done
+the same way as in capturing described in the previous paragraph:
+
+ int fd = socket(PF_PACKET, mode, 0);
+
+The protocol can optionally be 0 in case we only want to transmit
+via this socket, which avoids an expensive call to packet_rcv().
+In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
+set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
+
 Binding the socket to your network interface is mandatory (with zero copy) to
 know the header size of frames used in the circular buffer.
 

MAINTAINERS

@@ -893,20 +893,15 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
 F:	arch/arm/mach-imx/
+F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
-ARM/FREESCALE IMX6
-M:	Shawn Guo <shawn.guo@linaro.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F:	arch/arm/mach-imx/*imx6*
-
 ARM/FREESCALE MXS ARM ARCHITECTURE
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1013,6 +1008,8 @@ M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
+F:	drivers/clk/keystone/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -2138,7 +2135,8 @@ S:	Maintained
 F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
-M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+M:	Peter Chen <Peter.Chen@freescale.com>
+T:	git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -3765,9 +3763,11 @@ F:	include/uapi/linux/gigaset_dev.h
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
-S:	Maintained
+M:	Alexandre Courbot <gnurou@gmail.com>
 L:	linux-gpio@vger.kernel.org
-F:	Documentation/gpio.txt
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
+S:	Maintained
+F:	Documentation/gpio/
 F:	drivers/gpio/
 F:	include/linux/gpio*
 F:	include/asm-generic/gpio.h
@@ -3835,6 +3835,12 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/usb/gspca/
 
+GUID PARTITION TABLE (GPT)
+M:	Davidlohr Bueso <davidlohr@hp.com>
+L:	linux-efi@vger.kernel.org
+S:	Maintained
+F:	block/partitions/efi.*
+
 STK1160 USB VIDEO CAPTURE DRIVER
 M:	Ezequiel Garcia <elezegarcia@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -4044,6 +4050,14 @@ W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
+HSI SUBSYSTEM
+M:	Sebastian Reichel <sre@debian.org>
+S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-hsi
+F:	drivers/hsi/
+F:	include/linux/hsi/
+F:	include/uapi/linux/hsi/
+
 HSO 3G MODEM DRIVER
 M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
@@ -4462,10 +4476,8 @@ M:	Bruce Allan <bruce.w.allan@intel.com>
 M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
 M:	Don Skidmore <donald.c.skidmore@intel.com>
 M:	Greg Rose <gregory.v.rose@intel.com>
-M:	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
 M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
-M:	Tushar Dave <tushar.n.dave@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
@@ -5909,12 +5921,21 @@ M:	Steffen Klassert <steffen.klassert@secunet.com>
 M:	Herbert Xu <herbert@gondor.apana.org.au>
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git
 S:	Maintained
 F:	net/xfrm/
 F:	net/key/
 F:	net/ipv4/xfrm*
+F:	net/ipv4/esp4.c
+F:	net/ipv4/ah4.c
+F:	net/ipv4/ipcomp.c
+F:	net/ipv4/ip_vti.c
 F:	net/ipv6/xfrm*
+F:	net/ipv6/esp6.c
+F:	net/ipv6/ah6.c
+F:	net/ipv6/ipcomp6.c
+F:	net/ipv6/ip6_vti.c
 F:	include/uapi/linux/xfrm.h
 F:	include/net/xfrm.h
 
@@ -6461,19 +6482,52 @@ F:	drivers/pci/
 F:	include/linux/pci*
 F:	arch/x86/pci/
 
+PCI DRIVER FOR IMX6
+M:	Richard Zhu <r65037@freescale.com>
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/*imx6*
+
+PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
+M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M:	Jason Cooper <jason@lakedaemon.net>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/*mvebu*
+
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-tegra@vger.kernel.org
+L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/host/pci-tegra.c
 
+PCI DRIVER FOR RENESAS R-CAR
+M:	Simon Horman <horms@verge.net.au>
+L:	linux-pci@vger.kernel.org
+L:	linux-sh@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*rcar*
+
 PCI DRIVER FOR SAMSUNG EXYNOS
 M:	Jingoo Han <jg1.han@samsung.com>
 L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pci/host/pci-exynos.c
 
+PCI DRIVER FOR SYNOPSIS DESIGNWARE
+M:	Mohit Kumar <mohit.kumar@st.com>
+M:	Jingoo Han <jg1.han@samsung.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*designware*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org
@@ -9536,7 +9590,7 @@ F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Dave Chinner <dchinner@fromorbit.com>
+M:	Dave Chinner <david@fromorbit.com>
 M:	Ben Myers <bpm@sgi.com>
 M:	xfs@oss.sgi.com
 L:	xfs@oss.sgi.com

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*
@@ -732,19 +732,15 @@ export mod_strip_cmd
 # Select initial ramdisk compression format, default is gzip(1).
 # This shall be used by the dracut(8) tool while creating an initramfs image.
 #
-INITRD_COMPRESS=gzip
-ifeq ($(CONFIG_RD_BZIP2), y)
-        INITRD_COMPRESS=bzip2
-else ifeq ($(CONFIG_RD_LZMA), y)
-        INITRD_COMPRESS=lzma
-else ifeq ($(CONFIG_RD_XZ), y)
-        INITRD_COMPRESS=xz
-else ifeq ($(CONFIG_RD_LZO), y)
-        INITRD_COMPRESS=lzo
-else ifeq ($(CONFIG_RD_LZ4), y)
-        INITRD_COMPRESS=lz4
-endif
-export INITRD_COMPRESS
+INITRD_COMPRESS-y                  := gzip
+INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
+INITRD_COMPRESS-$(CONFIG_RD_LZMA)  := lzma
+INITRD_COMPRESS-$(CONFIG_RD_XZ)    := xz
+INITRD_COMPRESS-$(CONFIG_RD_LZO)   := lzo
+INITRD_COMPRESS-$(CONFIG_RD_LZ4)   := lz4
+# do not export INITRD_COMPRESS, since we didn't actually
+# choose a sane default compression above.
+# export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
 
 ifdef CONFIG_MODULE_SIG_ALL
 MODSECKEY = ./signing_key.priv

arch/arc/Kconfig

@@ -8,6 +8,7 @@
 
 config ARC
 	def_bool y
+	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
 	select DEVTMPFS if !INITRAMFS_SOURCE=""

arch/arc/include/uapi/asm/unistd.h

@@ -8,6 +8,13 @@
 
 /******** no-legacy-syscalls-ABI *******/
 
+/*
+ * Non-typical guard macro to enable inclusion twice in ARCH sys.c
+ * That is how the Generic syscall wrapper generator works
+ */
+#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
+#define _UAPI_ASM_ARC_UNISTD_H
+
 #define __ARCH_WANT_SYS_EXECVE
 #define __ARCH_WANT_SYS_CLONE
 #define __ARCH_WANT_SYS_VFORK
@@ -32,3 +39,7 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
 /* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
 #define __NR_sysfs		(__NR_arch_specific_syscall + 3)
 __SYSCALL(__NR_sysfs, sys_sysfs)
+
+#undef __SYSCALL
+
+#endif

arch/arc/kernel/perf_event.c

@@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config)
 	cache_result	= (config >> 16) & 0xff;
 	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
 		return -EINVAL;
-	if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX)
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
 		return -EINVAL;
-	if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
 
 	ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];

arch/arm/boot/dts/am3517-evm.dts

@@ -7,11 +7,11 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
-	model = "TI AM3517 EVM (AM3517/05)";
-	compatible = "ti,am3517-evm", "ti,omap3";
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
 	memory {
 		device_type = "memory";

arch/arm/boot/dts/am3517.dtsi

@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@0x5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+
+		davinci_mdio: ethernet@0x5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+	};
+};

arch/arm/boot/dts/omap3-n900.dts

@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap34xx-hs.dtsi"
 
 / {
 	model = "Nokia N900";

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "omap36xx.dtsi"
+#include "omap36xx-hs.dtsi"
 
 / {
 	cpus {

arch/arm/boot/dts/omap34xx-hs.dtsi

@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap36xx-hs.dtsi

@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};

arch/arm/boot/dts/r8a7790.dtsi

@@ -87,9 +87,9 @@
 		interrupts = <1 9 0xf04>;
 	};
 
-	gpio0: gpio@ffc40000 {
+	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc40000 0 0x2c>;
+		reg = <0 0xe6050000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 4 0x4>;
 		#gpio-cells = <2>;
@@ -99,9 +99,9 @@
 		interrupt-controller;
 	};
 
-	gpio1: gpio@ffc41000 {
+	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc41000 0 0x2c>;
+		reg = <0 0xe6051000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 5 0x4>;
 		#gpio-cells = <2>;
@@ -111,9 +111,9 @@
 		interrupt-controller;
 	};
 
-	gpio2: gpio@ffc42000 {
+	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc42000 0 0x2c>;
+		reg = <0 0xe6052000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 6 0x4>;
 		#gpio-cells = <2>;
@@ -123,9 +123,9 @@
 		interrupt-controller;
 	};
 
-	gpio3: gpio@ffc43000 {
+	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc43000 0 0x2c>;
+		reg = <0 0xe6053000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 7 0x4>;
 		#gpio-cells = <2>;
@@ -135,9 +135,9 @@
 		interrupt-controller;
 	};
 
-	gpio4: gpio@ffc44000 {
+	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc44000 0 0x2c>;
+		reg = <0 0xe6054000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 8 0x4>;
 		#gpio-cells = <2>;
@@ -147,9 +147,9 @@
 		interrupt-controller;
 	};
 
-	gpio5: gpio@ffc45000 {
+	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc45000 0 0x2c>;
+		reg = <0 0xe6055000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 9 0x4>;
 		#gpio-cells = <2>;

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -193,7 +193,10 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			interrupts = <0 11 4>,
+				     <0 15 4>,
+				     <0 16 4>,
+				     <0 17 4>;
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -212,11 +215,11 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 1>,
-				     <0 19 1>,
-				     <0 20 1>,
-				     <0 21 1>,
-				     <0 22 1>;
+			interrupts = <0 18 4>,
+				     <0 19 4>,
+				     <0 20 4>,
+				     <0 21 4>,
+				     <0 22 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -228,7 +231,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 1>;
+			interrupts = <0 0 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
@@ -238,7 +241,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
@@ -248,7 +251,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
@@ -258,7 +261,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
@@ -268,7 +271,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
@@ -278,7 +281,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 1>;
+			interrupts = <0 5 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -170,7 +170,7 @@
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-emac";
 			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 1>;
+			interrupts = <0 55 4>;
 			clocks = <&ahb_gates 17>;
 			status = "disabled";
 		};
@@ -186,7 +186,7 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 1>;
+			interrupts = <0 28 4>;
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -251,12 +251,12 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 1>,
-				     <0 23 1>,
-				     <0 24 1>,
-				     <0 25 1>,
-				     <0 67 1>,
-				     <0 68 1>;
+			interrupts = <0 22 4>,
+				     <0 23 4>,
+				     <0 24 4>,
+				     <0 25 4>,
+				     <0 67 4>,
+				     <0 68 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -273,7 +273,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 16>;
@@ -283,7 +283,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 17>;
@@ -293,7 +293,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 18>;
@@ -303,7 +303,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 19>;
@@ -313,7 +313,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 1>;
+			interrupts = <0 17 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 20>;
@@ -323,7 +323,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 1>;
+			interrupts = <0 18 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 21>;
@@ -333,7 +333,7 @@
 		uart6: serial@01c29800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 1>;
+			interrupts = <0 19 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 22>;
@@ -343,7 +343,7 @@
 		uart7: serial@01c29c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 1>;
+			interrupts = <0 20 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 23>;
@@ -353,7 +353,7 @@
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 1>;
+			interrupts = <0 7 4>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -362,7 +362,7 @@
 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 1>;
+			interrupts = <0 8 4>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -371,7 +371,7 @@
 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 1>;
+			interrupts = <0 9 4>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -380,7 +380,7 @@
 		i2c3: i2c@01c2b800 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 1>;
+			interrupts = <0 88 4>;
 			clocks = <&apb1_gates 3>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -389,7 +389,7 @@
 		i2c4: i2c@01c2bc00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2bc00 0x400>;
-			interrupts = <0 89 1>;
+			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;
 			status = "disabled";

arch/arm/include/asm/memory.h

@@ -100,23 +100,19 @@
 #define TASK_UNMAPPED_BASE	UL(0x00000000)
 #endif
 
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		UL(CONFIG_DRAM_BASE)
-#endif
-
 #ifndef END_MEM
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
 #ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(PHYS_OFFSET)
+#define PAGE_OFFSET		PLAT_PHYS_OFFSET
 #endif
 
 /*
  * The module can be at any place in ram in nommu mode.
  */
 #define MODULES_END		(END_MEM)
-#define MODULES_VADDR		(PHYS_OFFSET)
+#define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
 
@@ -157,6 +153,16 @@
 #endif
 #define ARCH_PGD_MASK		((1 << ARCH_PGD_SHIFT) - 1)
 
+/*
+ * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
+ * memory.  This is used for XIP and NoMMU kernels, or by kernels which
+ * have their own mach/memory.h.  Assembly code must always use
+ * PLAT_PHYS_OFFSET and not PHYS_OFFSET.
+ */
+#ifndef PLAT_PHYS_OFFSET
+#define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #else
 
+#define PHYS_OFFSET	PLAT_PHYS_OFFSET
+
 static inline phys_addr_t __virt_to_phys(unsigned long x)
 {
 	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
@@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #endif
 #endif
-#endif /* __ASSEMBLY__ */
-
-#ifndef PHYS_OFFSET
-#ifdef PLAT_PHYS_OFFSET
-#define PHYS_OFFSET	PLAT_PHYS_OFFSET
-#else
-#define PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
-#endif
-#endif
-
-#ifndef __ASSEMBLY__
 
 /*
  * PFNs are used to describe any physical page; this means

arch/arm/kernel/head-nommu.S

@@ -68,7 +68,7 @@ ENTRY(stext)
 
 #ifdef CONFIG_ARM_MPU
 	/* Calculate the size of a region covering just the kernel */
-	ldr	r5, =PHYS_OFFSET		@ Region start: PHYS_OFFSET
+	ldr	r5, =PLAT_PHYS_OFFSET		@ Region start: PHYS_OFFSET
 	ldr     r6, =(_end)			@ Cover whole kernel
 	sub	r6, r6, r5			@ Minimum size of region to map
 	clz	r6, r6				@ Region size must be 2^N...
@@ -213,7 +213,7 @@ ENTRY(__setup_mpu)
 	set_region_nr r0, #MPU_RAM_REGION
 	isb
 	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
-	ldr	r0, =PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
+	ldr	r0, =PLAT_PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
 	ldr	r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
 
 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ PHYS_OFFSET, shared, enabled

arch/arm/kernel/head.S

@@ -110,7 +110,7 @@ ENTRY(stext)
 	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
 	add	r8, r8, r4			@ PHYS_OFFSET
 #else
-	ldr	r8, =PHYS_OFFSET		@ always constant in this case
+	ldr	r8, =PLAT_PHYS_OFFSET		@ always constant in this case
 #endif
 
 	/*

arch/arm/kernel/process.c

@@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu);
 unsigned long get_wchan(struct task_struct *p)
 {
 	struct stackframe frame;
+	unsigned long stack_page;
 	int count = 0;
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
@@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p)
 	frame.sp = thread_saved_sp(p);
 	frame.lr = 0;			/* recovered from the stack */
 	frame.pc = thread_saved_pc(p);
+	stack_page = (unsigned long)task_stack_page(p);
 	do {
-		int ret = unwind_frame(&frame);
-		if (ret < 0)
+		if (frame.sp < stack_page ||
+		    frame.sp >= stack_page + THREAD_SIZE ||
+		    unwind_frame(&frame) < 0)
 			return 0;
 		if (!in_sched_functions(frame.pc))
 			return frame.pc;

arch/arm/kernel/setup.c

@@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
-	setup_dma_zone(mdesc);
-
 	if (mdesc->reboot_mode != REBOOT_HARD)
 		reboot_mode = mdesc->reboot_mode;
 
@@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p)
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
 
 	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
+	setup_dma_zone(mdesc);
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 

arch/arm/kernel/stacktrace.c

@@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame)
 	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
-	if (fp < (low + 12) || fp + 4 >= high)
+	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */

arch/arm/kernel/traps.c

@@ -509,9 +509,10 @@ static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
 	int ret;
-	unsigned long chunk = PAGE_SIZE;
 
 	do {
+		unsigned long chunk = min(PAGE_SIZE, end - start);
+
 		if (signal_pending(current)) {
 			struct thread_info *ti = current_thread_info();
 

arch/arm/mach-davinci/devices-da8xx.c

@@ -487,7 +487,7 @@ int __init da8xx_register_emac(void)
 
 static struct resource da830_mcasp1_resources[] = {
 	{
-		.name	= "mcasp1",
+		.name	= "mpu",
 		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
 		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
 		.flags	= IORESOURCE_MEM,
@@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = {
 
 static struct resource da850_mcasp_resources[] = {
 	{
-		.name	= "mcasp",
+		.name	= "mpu",
 		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
 		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
 		.flags	= IORESOURCE_MEM,

arch/arm/mach-davinci/dm355.c

@@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = {
 
 static struct resource dm355_asp1_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_ASP1_BASE,
 		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
 int __init dm355_gpio_register(void)
 {
 	return davinci_gpio_register(dm355_gpio_resources,
-				     sizeof(dm355_gpio_resources),
+				     ARRAY_SIZE(dm355_gpio_resources),
 				     &dm355_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-davinci/dm365.c

@@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
 int __init dm365_gpio_register(void)
 {
 	return davinci_gpio_register(dm365_gpio_resources,
-				     sizeof(dm365_gpio_resources),
+				     ARRAY_SIZE(dm365_gpio_resources),
 				     &dm365_gpio_platform_data);
 }
 
@@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = {
 
 static struct resource dm365_asp_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_DM365_ASP0_BASE,
 		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,

arch/arm/mach-davinci/dm644x.c

@@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = {
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
 static struct resource dm644x_asp_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_ASP0_BASE,
 		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
 int __init dm644x_gpio_register(void)
 {
 	return davinci_gpio_register(dm644_gpio_resources,
-				     sizeof(dm644_gpio_resources),
+				     ARRAY_SIZE(dm644_gpio_resources),
 				     &dm644_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-davinci/dm646x.c

@@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = {
 
 static struct resource dm646x_mcasp0_resources[] = {
 	{
-		.name	= "mcasp0",
+		.name	= "mpu",
 		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
 		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
 		.flags 	= IORESOURCE_MEM,
@@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = {
 
 static struct resource dm646x_mcasp1_resources[] = {
 	{
-		.name	= "mcasp1",
+		.name	= "mpu",
 		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
 		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
 		.flags	= IORESOURCE_MEM,
@@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
 int __init dm646x_gpio_register(void)
 {
 	return davinci_gpio_register(dm646x_gpio_resources,
-				     sizeof(dm646x_gpio_resources),
+				     ARRAY_SIZE(dm646x_gpio_resources),
 				     &dm646x_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-highbank/highbank.c

@@ -17,12 +17,15 @@
 #include <linux/clkdev.h>
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
+#include <linux/input.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
+#include <linux/mailbox.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/reboot.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 
@@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = {
 	.name = "cpuidle-calxeda",
 };
 
+static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+	u32 key = *(u32 *)data;
+
+	if (event != 0x1000)
+		return 0;
+
+	if (key == KEY_POWER)
+		orderly_poweroff(false);
+	else if (key == 0xffff)
+		ctrl_alt_del();
+
+	return 0;
+}
+static struct notifier_block hb_keys_nb = {
+	.notifier_call = hb_keys_notifier,
+};
+
 static void __init highbank_init(void)
 {
 	struct device_node *np;
@@ -145,6 +166,8 @@ static void __init highbank_init(void)
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
+	pl320_ipc_register_notifier(&hb_keys_nb);
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	if (psci_ops.cpu_suspend)

arch/arm/mach-omap2/board-generic.c

@@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.dt_compat	= omap3_gp_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
+
+static const char *am3517_boards_compat[] __initdata = {
+	"ti,am3517",
+	NULL,
+};
+
+DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_gptimer_timer_init,
+	.dt_compat	= am3517_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_AM33XX

arch/arm/mach-omap2/display.c

@@ -101,13 +101,51 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+{
+	u32 enable_mask, enable_shift;
+	u32 pipd_mask, pipd_shift;
+	u32 reg;
+
+	if (dsi_id == 0) {
+		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
+		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
+		pipd_mask = OMAP4_DSI1_PIPD_MASK;
+		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
+	} else if (dsi_id == 1) {
+		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
+		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
+		pipd_mask = OMAP4_DSI2_PIPD_MASK;
+		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
+	} else {
+		return -ENODEV;
+	}
+
+	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+	reg &= ~enable_mask;
+	reg &= ~pipd_mask;
+
+	reg |= (lanes << enable_shift) & enable_mask;
+	reg |= (lanes << pipd_shift) & pipd_mask;
+
+	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+	return 0;
+}
+
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
+	if (cpu_is_omap44xx())
+		return omap4_dsi_mux_pads(dsi_id, lane_mask);
+
 	return 0;
 }
 
 static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
+	if (cpu_is_omap44xx())
+		omap4_dsi_mux_pads(dsi_id, 0);
 }
 
 static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)

arch/arm/mach-omap2/omap_device.c

@@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 odbfd_exit1:
 	kfree(hwmods);
 odbfd_exit:
+	/* if data/we are at fault.. load up a fail handler */
+	if (ret)
+		pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+
 	return ret;
 }
 
@@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev)
 
 	return pm_generic_runtime_resume(dev);
 }
+
+static int _od_fail_runtime_suspend(struct device *dev)
+{
+	dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+	return -ENODEV;
+}
+
+static int _od_fail_runtime_resume(struct device *dev)
+{
+	dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+	return -ENODEV;
+}
+
 #endif
 
 #ifdef CONFIG_SUSPEND
@@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev)
 #define _od_resume_noirq NULL
 #endif
 
+struct dev_pm_domain omap_device_fail_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
+				   _od_fail_runtime_resume, NULL)
+	}
+};
+
 struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,

arch/arm/mach-omap2/omap_device.h

@@ -29,6 +29,7 @@
 #include "omap_hwmod.h"
 
 extern struct dev_pm_domain omap_device_pm_domain;
+extern struct dev_pm_domain omap_device_fail_pm_domain;
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0

arch/arm/mach-omap2/omap_hwmod.c

@@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
 }
 
 /**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
  * @oh: struct omap_hwmod *
  * @v: pointer to register contents to modify
  *
@@ -426,6 +426,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Clear the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	u32 softrst_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1,
+		     "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
+		     oh->name);
+		return -EINVAL;
+	}
+
+	softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+	*v &= ~softrst_mask;
+
+	return 0;
+}
+
 /**
  * _wait_softreset_complete - wait for an OCP softreset to complete
  * @oh: struct omap_hwmod * to wait on
@@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		os->_clk = c;
 		/*
@@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		oc->_clk = c;
 		/*
@@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	ret = _set_softreset(oh, &v);
 	if (ret)
 		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
 	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
@@ -2326,38 +2364,80 @@ static int _shutdown(struct omap_hwmod *oh)
 	return 0;
 }
 
+static int of_dev_find_hwmod(struct device_node *np,
+			     struct omap_hwmod *oh)
+{
+	int count, i, res;
+	const char *p;
+
+	count = of_property_count_strings(np, "ti,hwmods");
+	if (count < 1)
+		return -ENODEV;
+
+	for (i = 0; i < count; i++) {
+		res = of_property_read_string_index(np, "ti,hwmods",
+						    i, &p);
+		if (res)
+			continue;
+		if (!strcmp(p, oh->name)) {
+			pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
+				 np->name, i, oh->name);
+			return i;
+		}
+	}
+
+	return -ENODEV;
+}
+
 /**
  * of_dev_hwmod_lookup - look up needed hwmod from dt blob
  * @np: struct device_node *
  * @oh: struct omap_hwmod *
+ * @index: index of the entry found
+ * @found: struct device_node * found or NULL
  *
  * Parse the dt blob and find out needed hwmod. Recursive function is
  * implemented to take care hierarchical dt blob parsing.
- * Return: The device node on success or NULL on failure.
+ * Return: Returns 0 on success, -ENODEV when not found.
  */
-static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
-						struct omap_hwmod *oh)
+static int of_dev_hwmod_lookup(struct device_node *np,
+			       struct omap_hwmod *oh,
+			       int *index,
+			       struct device_node **found)
 {
-	struct device_node *np0 = NULL, *np1 = NULL;
-	const char *p;
+	struct device_node *np0 = NULL;
+	int res;
+
+	res = of_dev_find_hwmod(np, oh);
+	if (res >= 0) {
+		*found = np;
+		*index = res;
+		return 0;
+	}
 
 	for_each_child_of_node(np, np0) {
-		if (of_find_property(np0, "ti,hwmods", NULL)) {
-			p = of_get_property(np0, "ti,hwmods", NULL);
-			if (!strcmp(p, oh->name))
-				return np0;
-			np1 = of_dev_hwmod_lookup(np0, oh);
-			if (np1)
-				return np1;
+		struct device_node *fc;
+		int i;
+
+		res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
+		if (res == 0) {
+			*found = fc;
+			*index = i;
+			return 0;
 		}
 	}
-	return NULL;
+
+	*found = NULL;
+	*index = 0;
+
+	return -ENODEV;
 }
 
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
  * @data: (unused, caller should pass NULL)
+ * @index: index of the reg entry iospace in device tree
  * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
@@ -2368,7 +2448,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
  * -ENXIO on absent or invalid register target address space.
  */
 static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
-				    struct device_node *np)
+				    int index, struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
@@ -2390,13 +2470,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 		if (!np)
 			return -ENXIO;
 
-		va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, index + oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
-		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		if (mem)
+			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		else
+			pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
+			       oh->name, index, np->full_name);
 		return -ENXIO;
 	}
 
@@ -2422,17 +2506,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
-	int r;
+	int r, index;
 	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (of_have_populated_dt())
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+	if (of_have_populated_dt()) {
+		struct device_node *bus;
+
+		bus = of_find_node_by_name(NULL, "ocp");
+		if (!bus)
+			return -ENODEV;
+
+		r = of_dev_hwmod_lookup(bus, oh, &index, &np);
+		if (r)
+			pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
+		else if (np && index)
+			pr_warn("omap_hwmod: %s using broken dt data from %s\n",
+				oh->name, np->name);
+	}
 
 	if (oh->class->sysc) {
-		r = _init_mpu_rt_base(oh, NULL, np);
+		r = _init_mpu_rt_base(oh, NULL, index, np);
 		if (r < 0) {
 			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
 			     oh->name);
@@ -3169,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
 		goto error;
 	_write_sysconfig(v, oh);
 
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
 error:
 	return ret;
 }

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
@@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 	.main_clk	= "l3init_60m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-pxa/reset.c

@@ -13,6 +13,7 @@
 
 #include <mach/regs-ost.h>
 #include <mach/reset.h>
+#include <mach/smemc.h>
 
 unsigned int reset_status;
 EXPORT_SYMBOL(reset_status);
@@ -81,6 +82,12 @@ static void do_hw_reset(void)
 	writel_relaxed(OSSR_M3, OSSR);
 	/* ... in 100 ms */
 	writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
+	/*
+	 * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
+	 * we put SDRAM into self-refresh to prevent that
+	 */
+	while (1)
+		writel_relaxed(MDREFR_SLFRSH, MDREFR);
 }
 
 void pxa_restart(enum reboot_mode mode, const char *cmd)
@@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd)
 		break;
 	}
 }
-

arch/arm/mach-pxa/tosa.c

@@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = {
  * Tosa Keyboard
  */
 static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 2, KEY_W),
-	KEY(0, 6, KEY_K),
-	KEY(0, 7, KEY_BACKSPACE),
-	KEY(0, 8, KEY_P),
-	KEY(1, 1, KEY_Q),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_T),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 6, KEY_O),
-	KEY(1, 7, KEY_I),
-	KEY(1, 8, KEY_COMMA),
-	KEY(2, 1, KEY_A),
-	KEY(2, 2, KEY_D),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_U),
-	KEY(2, 6, KEY_L),
-	KEY(2, 7, KEY_ENTER),
-	KEY(2, 8, KEY_DOT),
-	KEY(3, 1, KEY_Z),
-	KEY(3, 2, KEY_C),
-	KEY(3, 3, KEY_V),
-	KEY(3, 4, KEY_J),
-	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 6, TOSA_KEY_CANCEL),
-	KEY(3, 7, TOSA_KEY_CENTER),
-	KEY(3, 8, TOSA_KEY_OK),
-	KEY(3, 9, KEY_LEFTSHIFT),
-	KEY(4, 1, KEY_S),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_B),
-	KEY(4, 4, KEY_N),
-	KEY(4, 5, TOSA_KEY_CALENDAR),
-	KEY(4, 6, TOSA_KEY_HOMEPAGE),
-	KEY(4, 7, KEY_LEFTCTRL),
-	KEY(4, 8, TOSA_KEY_LIGHT),
-	KEY(4, 10, KEY_RIGHTSHIFT),
-	KEY(5, 1, KEY_TAB),
-	KEY(5, 2, KEY_SLASH),
-	KEY(5, 3, KEY_H),
-	KEY(5, 4, KEY_M),
-	KEY(5, 5, TOSA_KEY_MENU),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, TOSA_KEY_FN),
-	KEY(6, 1, KEY_X),
-	KEY(6, 2, KEY_F),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_APOSTROPHE),
-	KEY(6, 5, TOSA_KEY_MAIL),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
+	KEY(0, 1, KEY_W),
+	KEY(0, 5, KEY_K),
+	KEY(0, 6, KEY_BACKSPACE),
+	KEY(0, 7, KEY_P),
+	KEY(1, 0, KEY_Q),
+	KEY(1, 1, KEY_E),
+	KEY(1, 2, KEY_T),
+	KEY(1, 3, KEY_Y),
+	KEY(1, 5, KEY_O),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_COMMA),
+	KEY(2, 0, KEY_A),
+	KEY(2, 1, KEY_D),
+	KEY(2, 2, KEY_G),
+	KEY(2, 3, KEY_U),
+	KEY(2, 5, KEY_L),
+	KEY(2, 6, KEY_ENTER),
+	KEY(2, 7, KEY_DOT),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_C),
+	KEY(3, 2, KEY_V),
+	KEY(3, 3, KEY_J),
+	KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
+	KEY(3, 5, TOSA_KEY_CANCEL),
+	KEY(3, 6, TOSA_KEY_CENTER),
+	KEY(3, 7, TOSA_KEY_OK),
+	KEY(3, 8, KEY_LEFTSHIFT),
+	KEY(4, 0, KEY_S),
+	KEY(4, 1, KEY_R),
+	KEY(4, 2, KEY_B),
+	KEY(4, 3, KEY_N),
+	KEY(4, 4, TOSA_KEY_CALENDAR),
+	KEY(4, 5, TOSA_KEY_HOMEPAGE),
+	KEY(4, 6, KEY_LEFTCTRL),
+	KEY(4, 7, TOSA_KEY_LIGHT),
+	KEY(4, 9, KEY_RIGHTSHIFT),
+	KEY(5, 0, KEY_TAB),
+	KEY(5, 1, KEY_SLASH),
+	KEY(5, 2, KEY_H),
+	KEY(5, 3, KEY_M),
+	KEY(5, 4, TOSA_KEY_MENU),
+	KEY(5, 6, KEY_UP),
+	KEY(5, 10, TOSA_KEY_FN),
+	KEY(6, 0, KEY_X),
+	KEY(6, 1, KEY_F),
+	KEY(6, 2, KEY_SPACE),
+	KEY(6, 3, KEY_APOSTROPHE),
+	KEY(6, 4, TOSA_KEY_MAIL),
+	KEY(6, 5, KEY_LEFT),
+	KEY(6, 6, KEY_DOWN),
+	KEY(6, 7, KEY_RIGHT),
 };
 
 static struct matrix_keymap_data tosakbd_keymap_data = {

arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c

@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/clk-provider.h>
-#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
@@ -48,15 +46,9 @@ static void __init s3c64xx_dt_map_io(void)
 		panic("SoC is not S3C64xx!");
 }
 
-static void __init s3c64xx_dt_init_irq(void)
-{
-	of_clk_init(NULL);
-	samsung_wdt_reset_of_init();
-	irqchip_init();
-};
-
 static void __init s3c64xx_dt_init_machine(void)
 {
+	samsung_wdt_reset_of_init();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -79,7 +71,6 @@ DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
 	/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
 	.dt_compat	= s3c64xx_dt_compat,
 	.map_io		= s3c64xx_dt_map_io,
-	.init_irq	= s3c64xx_dt_init_irq,
 	.init_machine	= s3c64xx_dt_init_machine,
 	.restart        = s3c64xx_dt_restart,
 MACHINE_END

arch/arm/mach-shmobile/board-lager.c

@@ -245,7 +245,9 @@ static void __init lager_init(void)
 {
 	lager_add_standard_devices();
 
-	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
+	if (IS_ENABLED(CONFIG_PHYLIB))
+		phy_register_fixup_for_id("r8a7790-ether-ff:01",
+					  lager_ksz8041_fixup);
 }
 
 static const char * const lager_boards_compat_dt[] __initconst = {

arch/arm/mach-tegra/fuse.c

@@ -198,10 +198,12 @@ void __init tegra_init_fuse(void)
 	switch (tegra_chip_id) {
 	case TEGRA20:
 		tegra20_fuse_init_randomness();
+		break;
 	case TEGRA30:
 	case TEGRA114:
 	default:
 		tegra30_fuse_init_randomness();
+		break;
 	}
 
 	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",

arch/arm/mm/dma-mapping.c

@@ -158,13 +158,49 @@ struct dma_map_ops arm_coherent_dma_ops = {
 };
 EXPORT_SYMBOL(arm_coherent_dma_ops);
 
+static int __dma_supported(struct device *dev, u64 mask, bool warn)
+{
+	unsigned long max_dma_pfn;
+
+	/*
+	 * If the mask allows for more memory than we can address,
+	 * and we actually have that much memory, then we must
+	 * indicate that DMA to this device is not supported.
+	 */
+	if (sizeof(mask) != sizeof(dma_addr_t) &&
+	    mask > (dma_addr_t)~0 &&
+	    dma_to_pfn(dev, ~0) < max_pfn) {
+		if (warn) {
+			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
+				 mask);
+			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
+		}
+		return 0;
+	}
+
+	max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+
+	/*
+	 * Translate the device's DMA mask to a PFN limit.  This
+	 * PFN number includes the page which we can DMA to.
+	 */
+	if (dma_to_pfn(dev, mask) < max_dma_pfn) {
+		if (warn)
+			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
+				 mask,
+				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
+				 max_dma_pfn + 1);
+		return 0;
+	}
+
+	return 1;
+}
+
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = (u64)DMA_BIT_MASK(32);
 
 	if (dev) {
-		unsigned long max_dma_pfn;
-
 		mask = dev->coherent_dma_mask;
 
 		/*
@@ -176,34 +212,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
 			return 0;
 		}
 
-		max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
-
-		/*
-		 * If the mask allows for more memory than we can address,
-		 * and we actually have that much memory, then fail the
-		 * allocation.
-		 */
-		if (sizeof(mask) != sizeof(dma_addr_t) &&
-		    mask > (dma_addr_t)~0 &&
-		    dma_to_pfn(dev, ~0) > max_dma_pfn) {
-			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
-				 mask);
-			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
-			return 0;
-		}
-
-		/*
-		 * Now check that the mask, when translated to a PFN,
-		 * fits within the allowable addresses which we can
-		 * allocate.
-		 */
-		if (dma_to_pfn(dev, mask) < max_dma_pfn) {
-			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
-				 mask,
-				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
-				 arm_dma_pfn_limit + 1);
+		if (!__dma_supported(dev, mask, true))
 			return 0;
-		}
 	}
 
 	return mask;
@@ -1032,28 +1042,7 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
  */
 int dma_supported(struct device *dev, u64 mask)
 {
-	unsigned long limit;
-
-	/*
-	 * If the mask allows for more memory than we can address,
-	 * and we actually have that much memory, then we must
-	 * indicate that DMA to this device is not supported.
-	 */
-	if (sizeof(mask) != sizeof(dma_addr_t) &&
-	    mask > (dma_addr_t)~0 &&
-	    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
-		return 0;
-
-	/*
-	 * Translate the device's DMA mask to a PFN limit.  This
-	 * PFN number includes the page which we can DMA to.
-	 */
-	limit = dma_to_pfn(dev, mask);
-
-	if (limit < arm_dma_pfn_limit)
-		return 0;
-
-	return 1;
+	return __dma_supported(dev, mask, false);
 }
 EXPORT_SYMBOL(dma_supported);
 

arch/arm/mm/init.c

@@ -229,7 +229,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
 #ifdef CONFIG_ZONE_DMA
 	if (mdesc->dma_zone_size) {
 		arm_dma_zone_size = mdesc->dma_zone_size;
-		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
+		arm_dma_limit = __pv_phys_offset + arm_dma_zone_size - 1;
 	} else
 		arm_dma_limit = 0xffffffff;
 	arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;

arch/arm/xen/enlighten.c

@@ -96,7 +96,7 @@ static int remap_pte_fn(pte_t *ptep, pgtable_t token, unsigned long addr,
 	struct remap_data *info = data;
 	struct page *page = info->pages[info->index++];
 	unsigned long pfn = page_to_pfn(page);
-	pte_t pte = pfn_pte(pfn, info->prot);
+	pte_t pte = pte_mkspecial(pfn_pte(pfn, info->prot));
 
 	if (map_foreign_page(pfn, info->fgmfn, info->domid))
 		return -EFAULT;
@@ -224,10 +224,10 @@ static int __init xen_guest_init(void)
 	}
 	if (of_address_to_resource(node, GRANT_TABLE_PHYSADDR, &res))
 		return 0;
-	xen_hvm_resume_frames = res.start >> PAGE_SHIFT;
+	xen_hvm_resume_frames = res.start;
 	xen_events_irq = irq_of_parse_and_map(node, 0);
 	pr_info("Xen %s support found, events_irq=%d gnttab_frame_pfn=%lx\n",
-			version, xen_events_irq, xen_hvm_resume_frames);
+			version, xen_events_irq, (xen_hvm_resume_frames >> PAGE_SHIFT));
 	xen_domain_type = XEN_HVM_DOMAIN;
 
 	xen_setup_features();

arch/arm64/Kconfig

@@ -159,8 +159,7 @@ config NR_CPUS
 	range 2 32
 	depends on SMP
 	# These have to remain sorted largest to smallest
-	default "8" if ARCH_XGENE
-	default "4"
+	default "8"
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"

arch/arm64/include/asm/io.h

@@ -229,7 +229,7 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot
 extern void __iounmap(volatile void __iomem *addr);
 extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 
-#define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
+#define PROT_DEFAULT		(pgprot_default | PTE_DIRTY)
 #define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
 #define PROT_NORMAL		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))

arch/arm64/include/asm/pgtable-hwdef.h

@@ -43,7 +43,7 @@
  * Section
  */
 #define PMD_SECT_VALID		(_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE	(_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_PROT_NONE	(_AT(pmdval_t, 1) << 58)
 #define PMD_SECT_USER		(_AT(pmdval_t, 1) << 6)		/* AP[1] */
 #define PMD_SECT_RDONLY		(_AT(pmdval_t, 1) << 7)		/* AP[2] */
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)

arch/arm64/include/asm/xen/page-coherent.h

@@ -23,25 +23,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
 	     struct dma_attrs *attrs)
 {
-	__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
 }
 
 static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir,
 		struct dma_attrs *attrs)
 {
-	__generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
 }
 
 static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
-	__generic_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir);
 }
 
 static inline void xen_dma_sync_single_for_device(struct device *hwdev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
-	__generic_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir);
 }
 #endif /* _ASM_ARM64_XEN_PAGE_COHERENT_H */

arch/arm64/kernel/head.S

@@ -282,8 +282,9 @@ ENDPROC(secondary_holding_pen)
 	 * be used where CPUs are brought online dynamically by the kernel.
 	 */
 ENTRY(secondary_entry)
-	bl	__calc_phys_offset		// x2=phys offset
 	bl	el2_setup			// Drop to EL1
+	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+	bl	set_cpu_boot_mode_flag
 	b	secondary_startup
 ENDPROC(secondary_entry)
 

arch/arm64/kernel/ptrace.c

@@ -214,31 +214,29 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
 {
 	int err, len, type, disabled = !ctrl.enabled;
 
-	if (disabled) {
-		len = 0;
-		type = HW_BREAKPOINT_EMPTY;
-	} else {
-		err = arch_bp_generic_fields(ctrl, &len, &type);
-		if (err)
-			return err;
-
-		switch (note_type) {
-		case NT_ARM_HW_BREAK:
-			if ((type & HW_BREAKPOINT_X) != type)
-				return -EINVAL;
-			break;
-		case NT_ARM_HW_WATCH:
-			if ((type & HW_BREAKPOINT_RW) != type)
-				return -EINVAL;
-			break;
-		default:
+	attr->disabled = disabled;
+	if (disabled)
+		return 0;
+
+	err = arch_bp_generic_fields(ctrl, &len, &type);
+	if (err)
+		return err;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if ((type & HW_BREAKPOINT_X) != type)
 			return -EINVAL;
-		}
+		break;
+	case NT_ARM_HW_WATCH:
+		if ((type & HW_BREAKPOINT_RW) != type)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
 	}
 
 	attr->bp_len	= len;
 	attr->bp_type	= type;
-	attr->disabled	= disabled;
 
 	return 0;
 }

arch/arm64/mm/proc.S

@@ -111,12 +111,12 @@ ENTRY(__cpu_setup)
 	bl	__flush_dcache_all
 	mov	lr, x28
 	ic	iallu				// I+BTB cache invalidate
+	tlbi	vmalle1is			// invalidate I + D TLBs
 	dsb	sy
 
 	mov	x0, #3 << 20
 	msr	cpacr_el1, x0			// Enable FP/ASIMD
 	msr	mdscr_el1, xzr			// Reset mdscr_el1
-	tlbi	vmalle1is			// invalidate I + D TLBs
 	/*
 	 * Memory region attributes for LPAE:
 	 *

arch/avr32/boards/favr-32/setup.c

@@ -298,8 +298,10 @@ static int __init set_abdac_rate(struct platform_device *pdev)
 	 */
 	retval = clk_round_rate(pll1,
 			CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
-	if (retval < 0)
+	if (retval <= 0) {
+		retval = -EINVAL;
 		goto out_abdac;
+	}
 
 	retval = clk_set_rate(pll1, retval);
 	if (retval != 0)

arch/avr32/configs/atngw100_defconfig

@@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100_evklcd100_defconfig

@@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100_evklcd101_defconfig

@@ -60,7 +60,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100_mrmt_defconfig

@@ -48,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100mkii_defconfig

@@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100mkii_evklcd100_defconfig

@@ -62,7 +62,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100mkii_evklcd101_defconfig

@@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1002_defconfig

@@ -53,7 +53,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1003_defconfig

@@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1004_defconfig

@@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1006_defconfig

@@ -54,7 +54,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/favr-32_defconfig

@@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/hammerhead_defconfig

@@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/merisc_defconfig

@@ -46,7 +46,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/avr32/configs/mimc200_defconfig

@@ -49,7 +49,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/kernel/time.c

@@ -59,7 +59,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
 	/* Oprofile uses the same irq as the timer, so allow it to be shared */
-	.flags		= IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
+	.flags		= IRQF_TIMER | IRQF_SHARED,
 	.name		= "avr32_comparator",
 };
 

arch/avr32/mach-at32ap/pm.c

@@ -181,7 +181,7 @@ static const struct platform_suspend_ops avr32_pm_ops = {
 	.enter	= avr32_pm_enter,
 };
 
-static unsigned long avr32_pm_offset(void *symbol)
+static unsigned long __init avr32_pm_offset(void *symbol)
 {
 	extern u8 pm_exception[];
 

arch/powerpc/boot/dts/mpc5121.dtsi

@@ -77,7 +77,6 @@
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		#interrupt-cells = <2>;
 		ranges = <0x0 0x80000000 0x400000>;
 		reg = <0x80000000 0x400000>;
 		bus-frequency = <66000000>;	/* 66 MHz ips bus */

arch/powerpc/configs/52xx/cm5200_defconfig

@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
@@ -71,6 +70,8 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_STORAGE=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/lite5200b_defconfig

@@ -15,7 +15,6 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_LITE5200=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SPARSE_IRQ=y
@@ -59,6 +58,8 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/motionpro_defconfig

@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
@@ -84,6 +83,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/pcm030_defconfig

@@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
@@ -87,6 +86,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_STORAGE=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/tqm5200_defconfig

@@ -17,7 +17,6 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
 CONFIG_NET=y
@@ -86,6 +85,8 @@ CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/mpc5200_defconfig

@@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y
 CONFIG_PPC_MPC5200_BUGFIX=y
 CONFIG_PPC_MPC5200_LPBFIFO=m
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_SIMPLE_GPIO=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -125,6 +124,8 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/pasemi_defconfig

@@ -2,7 +2,6 @@ CONFIG_PPC64=y
 CONFIG_ALTIVEC=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -45,8 +44,9 @@ CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_SLRAM=y
 CONFIG_MTD_PHRAM=y
@@ -88,7 +88,6 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_MII=y
 CONFIG_TIGON3=y
 CONFIG_E1000=y
 CONFIG_PASEMI_MAC=y
@@ -174,8 +173,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set

arch/powerpc/include/asm/kvm_book3s.h

@@ -192,6 +192,10 @@ extern void kvmppc_load_up_vsx(void);
 extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
 extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
 extern int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd);
+extern void kvmppc_copy_to_svcpu(struct kvmppc_book3s_shadow_vcpu *svcpu,
+				 struct kvm_vcpu *vcpu);
+extern void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu,
+				   struct kvmppc_book3s_shadow_vcpu *svcpu);
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {

arch/powerpc/include/asm/kvm_book3s_asm.h

@@ -79,6 +79,7 @@ struct kvmppc_host_state {
 	ulong vmhandler;
 	ulong scratch0;
 	ulong scratch1;
+	ulong scratch2;
 	u8 in_guest;
 	u8 restore_hid5;
 	u8 napping;
@@ -106,6 +107,7 @@ struct kvmppc_host_state {
 };
 
 struct kvmppc_book3s_shadow_vcpu {
+	bool in_use;
 	ulong gpr[14];
 	u32 cr;
 	u32 xer;

arch/powerpc/include/asm/opal.h

@@ -720,13 +720,13 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 int64_t opal_pci_poll(uint64_t phb_id);
 int64_t opal_return_cpu(void);
 
-int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val);
+int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val);
 int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val);
 
 int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
 		       uint32_t addr, uint32_t data, uint32_t sz);
 int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
-		      uint32_t addr, uint32_t *data, uint32_t sz);
+		      uint32_t addr, __be32 *data, uint32_t sz);
 int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result);
 int64_t opal_manage_flash(uint8_t op);
 int64_t opal_update_flash(uint64_t blk_list);

arch/powerpc/include/asm/pgalloc-32.h

@@ -84,10 +84,8 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 				  unsigned long address)
 {
-	struct page *page = page_address(table);
-
 	tlb_flush_pgtable(tlb, address);
-	pgtable_page_dtor(page);
-	pgtable_free_tlb(tlb, page, 0);
+	pgtable_page_dtor(table);
+	pgtable_free_tlb(tlb, page_address(table), 0);
 }
 #endif /* _ASM_POWERPC_PGALLOC_32_H */

arch/powerpc/include/asm/pgalloc-64.h

@@ -148,11 +148,9 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 				  unsigned long address)
 {
-	struct page *page = page_address(table);
-
 	tlb_flush_pgtable(tlb, address);
-	pgtable_page_dtor(page);
-	pgtable_free_tlb(tlb, page, 0);
+	pgtable_page_dtor(table);
+	pgtable_free_tlb(tlb, page_address(table), 0);
 }
 
 #else /* if CONFIG_PPC_64K_PAGES */

arch/powerpc/include/asm/switch_to.h

@@ -35,7 +35,7 @@ extern void giveup_vsx(struct task_struct *);
 extern void enable_kernel_spe(void);
 extern void giveup_spe(struct task_struct *);
 extern void load_up_spe(struct task_struct *);
-extern void switch_booke_debug_regs(struct thread_struct *new_thread);
+extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
 #ifndef CONFIG_SMP
 extern void discard_lazy_cpu_state(void);

arch/powerpc/kernel/asm-offsets.c

@@ -576,6 +576,7 @@ int main(void)
 	HSTATE_FIELD(HSTATE_VMHANDLER, vmhandler);
 	HSTATE_FIELD(HSTATE_SCRATCH0, scratch0);
 	HSTATE_FIELD(HSTATE_SCRATCH1, scratch1);
+	HSTATE_FIELD(HSTATE_SCRATCH2, scratch2);
 	HSTATE_FIELD(HSTATE_IN_GUEST, in_guest);
 	HSTATE_FIELD(HSTATE_RESTORE_HID5, restore_hid5);
 	HSTATE_FIELD(HSTATE_NAPPING, napping);

arch/powerpc/kernel/crash_dump.c

@@ -124,15 +124,15 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
 {
 	unsigned long addr;
-	const u32 *basep, *sizep;
+	const __be32 *basep, *sizep;
 	unsigned int rtas_start = 0, rtas_end = 0;
 
 	basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
 	sizep = of_get_property(rtas.dev, "rtas-size", NULL);
 
 	if (basep && sizep) {
-		rtas_start = *basep;
-		rtas_end = *basep + *sizep;
+		rtas_start = be32_to_cpup(basep);
+		rtas_end = rtas_start + be32_to_cpup(sizep);
 	}
 
 	for (addr = begin; addr < end; addr += PAGE_SIZE) {

arch/powerpc/kernel/machine_kexec.c

@@ -148,7 +148,7 @@ void __init reserve_crashkernel(void)
 		 * a small SLB (128MB) since the crash kernel needs to place
 		 * itself and some stacks to be in the first segment.
 		 */
-		crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2));
+		crashk_res.start = min(0x8000000ULL, (ppc64_rma_size / 2));
 #else
 		crashk_res.start = KDUMP_KERNELBASE;
 #endif

arch/powerpc/kernel/misc_64.S

@@ -246,8 +246,8 @@ _GLOBAL(__bswapdi2)
 	or	r3,r7,r9
 	blr
 
-#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
 _GLOBAL(rmci_on)
 	sync
 	isync
@@ -277,6 +277,9 @@ _GLOBAL(rmci_off)
 	isync
 	sync
 	blr
+#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
+
+#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
 
 /*
  * Do an IO access in real mode

arch/powerpc/kernel/process.c

@@ -339,7 +339,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
 #endif
 }
 
-static void prime_debug_regs(struct thread_struct *thread)
+static void prime_debug_regs(struct debug_reg *debug)
 {
 	/*
 	 * We could have inherited MSR_DE from userspace, since
@@ -348,22 +348,22 @@ static void prime_debug_regs(struct thread_struct *thread)
 	 */
 	mtmsr(mfmsr() & ~MSR_DE);
 
-	mtspr(SPRN_IAC1, thread->debug.iac1);
-	mtspr(SPRN_IAC2, thread->debug.iac2);
+	mtspr(SPRN_IAC1, debug->iac1);
+	mtspr(SPRN_IAC2, debug->iac2);
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	mtspr(SPRN_IAC3, thread->debug.iac3);
-	mtspr(SPRN_IAC4, thread->debug.iac4);
+	mtspr(SPRN_IAC3, debug->iac3);
+	mtspr(SPRN_IAC4, debug->iac4);
 #endif
-	mtspr(SPRN_DAC1, thread->debug.dac1);
-	mtspr(SPRN_DAC2, thread->debug.dac2);
+	mtspr(SPRN_DAC1, debug->dac1);
+	mtspr(SPRN_DAC2, debug->dac2);
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-	mtspr(SPRN_DVC1, thread->debug.dvc1);
-	mtspr(SPRN_DVC2, thread->debug.dvc2);
+	mtspr(SPRN_DVC1, debug->dvc1);
+	mtspr(SPRN_DVC2, debug->dvc2);
 #endif
-	mtspr(SPRN_DBCR0, thread->debug.dbcr0);
-	mtspr(SPRN_DBCR1, thread->debug.dbcr1);
+	mtspr(SPRN_DBCR0, debug->dbcr0);
+	mtspr(SPRN_DBCR1, debug->dbcr1);
 #ifdef CONFIG_BOOKE
-	mtspr(SPRN_DBCR2, thread->debug.dbcr2);
+	mtspr(SPRN_DBCR2, debug->dbcr2);
 #endif
 }
 /*
@@ -371,11 +371,11 @@ static void prime_debug_regs(struct thread_struct *thread)
  * debug registers, set the debug registers from the values
  * stored in the new thread.
  */
-void switch_booke_debug_regs(struct thread_struct *new_thread)
+void switch_booke_debug_regs(struct debug_reg *new_debug)
 {
 	if ((current->thread.debug.dbcr0 & DBCR0_IDM)
-		|| (new_thread->debug.dbcr0 & DBCR0_IDM))
-			prime_debug_regs(new_thread);
+		|| (new_debug->dbcr0 & DBCR0_IDM))
+			prime_debug_regs(new_debug);
 }
 EXPORT_SYMBOL_GPL(switch_booke_debug_regs);
 #else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
@@ -683,7 +683,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	switch_booke_debug_regs(&new->thread);
+	switch_booke_debug_regs(&new->thread.debug);
 #else
 /*
  * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would

arch/powerpc/kernel/ptrace.c

@@ -1555,7 +1555,7 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&tmp, &child->thread.fp_state.fpr,
+				memcpy(&tmp, &child->thread.TS_FPR(fpidx),
 				       sizeof(long));
 			else
 				tmp = child->thread.fp_state.fpscr;
@@ -1588,7 +1588,7 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&child->thread.fp_state.fpr, &data,
+				memcpy(&child->thread.TS_FPR(fpidx), &data,
 				       sizeof(long));
 			else
 				child->thread.fp_state.fpscr = data;

arch/powerpc/kernel/setup-common.c

@@ -479,7 +479,7 @@ void __init smp_setup_cpu_maps(void)
 	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) &&
 	    (dn = of_find_node_by_path("/rtas"))) {
 		int num_addr_cell, num_size_cell, maxcpus;
-		const unsigned int *ireg;
+		const __be32 *ireg;
 
 		num_addr_cell = of_n_addr_cells(dn);
 		num_size_cell = of_n_size_cells(dn);
@@ -489,7 +489,7 @@ void __init smp_setup_cpu_maps(void)
 		if (!ireg)
 			goto out;
 
-		maxcpus = ireg[num_addr_cell + num_size_cell];
+		maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell);
 
 		/* Double maxcpus for processors which have SMT capability */
 		if (cpu_has_feature(CPU_FTR_SMT))

arch/powerpc/kernel/smp.c

@@ -580,7 +580,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 int cpu_to_core_id(int cpu)
 {
 	struct device_node *np;
-	const int *reg;
+	const __be32 *reg;
 	int id = -1;
 
 	np = of_get_cpu_node(cpu, NULL);
@@ -591,7 +591,7 @@ int cpu_to_core_id(int cpu)
 	if (!reg)
 		goto out;
 
-	id = *reg;
+	id = be32_to_cpup(reg);
 out:
 	of_node_put(np);
 	return id;