drm/bridge: adv7511: Initialize regulators

Maintain a table of regulator names expected by ADV7511 and ADV7533.
Use regulator_bulk_* api to configure these.

Initialize and enable the regulators during probe itself. Controlling
these dynamically is left for later.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484117547-26417-3-git-send-email-architt@codeaurora.org

drivers/gpu/drm/bridge/adv7511/adv7511.h

@@ -12,6 +12,7 @@
 #include <linux/hdmi.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_mipi_dsi.h>
@@ -329,6 +330,9 @@ struct adv7511 {
 
 	struct gpio_desc *gpio_pd;
 
+	struct regulator_bulk_data *supplies;
+	unsigned int num_supplies;
+
 	/* ADV7533 DSI RX related params */
 	struct device_node *host_node;
 	struct mipi_dsi_device *dsi;

drivers/gpu/drm/bridge/adv7511/adv7511_drv.c

@@ -839,6 +839,58 @@ static struct drm_bridge_funcs adv7511_bridge_funcs = {
  * Probe & remove
  */
 
+static const char * const adv7511_supply_names[] = {
+	"avdd",
+	"dvdd",
+	"pvdd",
+	"bgvdd",
+	"dvdd-3v",
+};
+
+static const char * const adv7533_supply_names[] = {
+	"avdd",
+	"dvdd",
+	"pvdd",
+	"a2vdd",
+	"v3p3",
+	"v1p2",
+};
+
+static int adv7511_init_regulators(struct adv7511 *adv)
+{
+	struct device *dev = &adv->i2c_main->dev;
+	const char * const *supply_names;
+	unsigned int i;
+	int ret;
+
+	if (adv->type == ADV7511) {
+		supply_names = adv7511_supply_names;
+		adv->num_supplies = ARRAY_SIZE(adv7511_supply_names);
+	} else {
+		supply_names = adv7533_supply_names;
+		adv->num_supplies = ARRAY_SIZE(adv7533_supply_names);
+	}
+
+	adv->supplies = devm_kcalloc(dev, adv->num_supplies,
+				     sizeof(*adv->supplies), GFP_KERNEL);
+	if (!adv->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < adv->num_supplies; i++)
+		adv->supplies[i].supply = supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, adv->num_supplies, adv->supplies);
+	if (ret)
+		return ret;
+
+	return regulator_bulk_enable(adv->num_supplies, adv->supplies);
+}
+
+static void adv7511_uninit_regulators(struct adv7511 *adv)
+{
+	regulator_bulk_disable(adv->num_supplies, adv->supplies);
+}
+
 static int adv7511_parse_dt(struct device_node *np,
 			    struct adv7511_link_config *config)
 {
@@ -939,6 +991,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (!adv7511)
 		return -ENOMEM;
 
+	adv7511->i2c_main = i2c;
 	adv7511->powered = false;
 	adv7511->status = connector_status_disconnected;
 
@@ -956,13 +1009,21 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (ret)
 		return ret;
 
+	ret = adv7511_init_regulators(adv7511);
+	if (ret) {
+		dev_err(dev, "failed to init regulators\n");
+		return ret;
+	}
+
 	/*
 	 * The power down GPIO is optional. If present, toggle it from active to
 	 * inactive to wake up the encoder.
 	 */
 	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
-	if (IS_ERR(adv7511->gpio_pd))
-		return PTR_ERR(adv7511->gpio_pd);
+	if (IS_ERR(adv7511->gpio_pd)) {
+		ret = PTR_ERR(adv7511->gpio_pd);
+		goto uninit_regulators;
+	}
 
 	if (adv7511->gpio_pd) {
 		mdelay(5);
@@ -970,12 +1031,14 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	}
 
 	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
-	if (IS_ERR(adv7511->regmap))
-		return PTR_ERR(adv7511->regmap);
+	if (IS_ERR(adv7511->regmap)) {
+		ret = PTR_ERR(adv7511->regmap);
+		goto uninit_regulators;
+	}
 
 	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
 	if (ret)
-		return ret;
+		goto uninit_regulators;
 	dev_dbg(dev, "Rev. %d\n", val);
 
 	if (adv7511->type == ADV7511)
@@ -985,7 +1048,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	else
 		ret = adv7533_patch_registers(adv7511);
 	if (ret)
-		return ret;
+		goto uninit_regulators;
 
 	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
 	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
@@ -995,10 +1058,11 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	adv7511_packet_disable(adv7511, 0xffff);
 
-	adv7511->i2c_main = i2c;
 	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
-	if (!adv7511->i2c_edid)
-		return -ENOMEM;
+	if (!adv7511->i2c_edid) {
+		ret = -ENOMEM;
+		goto uninit_regulators;
+	}
 
 	if (adv7511->type == ADV7533) {
 		ret = adv7533_init_cec(adv7511);
@@ -1045,6 +1109,8 @@ err_unregister_cec:
 	adv7533_uninit_cec(adv7511);
 err_i2c_unregister_edid:
 	i2c_unregister_device(adv7511->i2c_edid);
+uninit_regulators:
+	adv7511_uninit_regulators(adv7511);
 
 	return ret;
 }
@@ -1058,6 +1124,8 @@ static int adv7511_remove(struct i2c_client *i2c)
 		adv7533_uninit_cec(adv7511);
 	}
 
+	adv7511_uninit_regulators(adv7511);
+
 	drm_bridge_remove(&adv7511->bridge);
 
 	adv7511_audio_exit(adv7511);