Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2016-06-29

This series contains fixes to e1000e and ixgbevf.

Jarod Wilson's fix for e1000e was a follow-on patch to his previous fix to
keep the hardware VLAN CTAG's for receive and transmit in sync, which
in turn resolves the original issue, so revert a portion of the original
fix.

Xin Long noticed that the ret_val needed to be initialized to IXGBE_ERR_MBX,
instead of -IXGBE_ERR_MBX.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -154,16 +154,6 @@ void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
 	writel(val, hw->hw_addr + reg);
 }
 
-static bool e1000e_vlan_used(struct e1000_adapter *adapter)
-{
-	u16 vid;
-
-	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
-		return true;
-
-	return false;
-}
-
 /**
  * e1000_regdump - register printout routine
  * @hw: pointer to the HW structure
@@ -3453,8 +3443,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
 
 	ew32(RCTL, rctl);
 
-	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX ||
-	    e1000e_vlan_used(adapter))
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
 		e1000e_vlan_strip_enable(adapter);
 	else
 		e1000e_vlan_strip_disable(adapter);
@@ -6926,6 +6915,14 @@ static netdev_features_t e1000_fix_features(struct net_device *netdev,
 	if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN))
 		features &= ~NETIF_F_RXFCS;
 
+	/* Since there is no support for separate Rx/Tx vlan accel
+	 * enable/disable make sure Tx flag is always in same state as Rx.
+	 */
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		features |= NETIF_F_HW_VLAN_CTAG_TX;
+	else
+		features &= ~NETIF_F_HW_VLAN_CTAG_TX;
+
 	return features;
 }
 

drivers/net/ethernet/intel/ixgbevf/mbx.c

@@ -85,7 +85,7 @@ static s32 ixgbevf_poll_for_ack(struct ixgbe_hw *hw)
 static s32 ixgbevf_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
 {
 	struct ixgbe_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -IXGBE_ERR_MBX;
+	s32 ret_val = IXGBE_ERR_MBX;
 
 	if (!mbx->ops.read)
 		goto out;
@@ -111,7 +111,7 @@ out:
 static s32 ixgbevf_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
 {
 	struct ixgbe_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -IXGBE_ERR_MBX;
+	s32 ret_val = IXGBE_ERR_MBX;
 
 	/* exit if either we can't write or there isn't a defined timeout */
 	if (!mbx->ops.write || !mbx->timeout)