浏览代码

Merge branch 'ndo_set_config'

Florian Fainelli says:

====================
net: ndo_set_config/ifmap cleanups

This patch series removes a bunch of useless ndo_set_config in non
PCMCIA Ethernet drivers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller 11 年之前
父节点
当前提交
5a9d19ab76

+ 0 - 6
drivers/net/ethernet/ethoc.c

@@ -769,11 +769,6 @@ static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return phy_mii_ioctl(phy, ifr, cmd);
 	return phy_mii_ioctl(phy, ifr, cmd);
 }
 }
 
 
-static int ethoc_config(struct net_device *dev, struct ifmap *map)
-{
-	return -ENOSYS;
-}
-
 static void ethoc_do_set_mac_address(struct net_device *dev)
 static void ethoc_do_set_mac_address(struct net_device *dev)
 {
 {
 	struct ethoc *priv = netdev_priv(dev);
 	struct ethoc *priv = netdev_priv(dev);
@@ -995,7 +990,6 @@ static const struct net_device_ops ethoc_netdev_ops = {
 	.ndo_open = ethoc_open,
 	.ndo_open = ethoc_open,
 	.ndo_stop = ethoc_stop,
 	.ndo_stop = ethoc_stop,
 	.ndo_do_ioctl = ethoc_ioctl,
 	.ndo_do_ioctl = ethoc_ioctl,
-	.ndo_set_config = ethoc_config,
 	.ndo_set_mac_address = ethoc_set_mac_address,
 	.ndo_set_mac_address = ethoc_set_mac_address,
 	.ndo_set_rx_mode = ethoc_set_multicast_list,
 	.ndo_set_rx_mode = ethoc_set_multicast_list,
 	.ndo_change_mtu = ethoc_change_mtu,
 	.ndo_change_mtu = ethoc_change_mtu,

+ 0 - 35
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

@@ -1909,40 +1909,6 @@ static void sxgbe_set_rx_mode(struct net_device *dev)
 		   readl(ioaddr + SXGBE_HASH_LOW));
 		   readl(ioaddr + SXGBE_HASH_LOW));
 }
 }
 
 
-/**
- * sxgbe_config - entry point for changing configuration mode passed on by
- * ifconfig
- * @dev : pointer to the device structure
- * @map : pointer to the device mapping structure
- * Description:
- * This function is a driver entry point which gets called by the kernel
- * whenever some device configuration is changed.
- * Return value:
- * This function returns 0 if success and appropriate error otherwise.
- */
-static int sxgbe_config(struct net_device *dev, struct ifmap *map)
-{
-	struct sxgbe_priv_data *priv = netdev_priv(dev);
-
-	/* Can't act on a running interface */
-	if (dev->flags & IFF_UP)
-		return -EBUSY;
-
-	/* Don't allow changing the I/O address */
-	if (map->base_addr != (unsigned long)priv->ioaddr) {
-		netdev_warn(dev, "can't change I/O address\n");
-		return -EOPNOTSUPP;
-	}
-
-	/* Don't allow changing the IRQ */
-	if (map->irq != priv->irq) {
-		netdev_warn(dev, "not change IRQ number %d\n", priv->irq);
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /**
 /**
  * sxgbe_poll_controller - entry point for polling receive by device
  * sxgbe_poll_controller - entry point for polling receive by device
@@ -2004,7 +1970,6 @@ static const struct net_device_ops sxgbe_netdev_ops = {
 	.ndo_set_rx_mode	= sxgbe_set_rx_mode,
 	.ndo_set_rx_mode	= sxgbe_set_rx_mode,
 	.ndo_tx_timeout		= sxgbe_tx_timeout,
 	.ndo_tx_timeout		= sxgbe_tx_timeout,
 	.ndo_do_ioctl		= sxgbe_ioctl,
 	.ndo_do_ioctl		= sxgbe_ioctl,
-	.ndo_set_config		= sxgbe_config,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= sxgbe_poll_controller,
 	.ndo_poll_controller	= sxgbe_poll_controller,
 #endif
 #endif

+ 0 - 22
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -2214,27 +2214,6 @@ static void stmmac_tx_timeout(struct net_device *dev)
 	stmmac_tx_err(priv);
 	stmmac_tx_err(priv);
 }
 }
 
 
-/* Configuration changes (passed on by ifconfig) */
-static int stmmac_config(struct net_device *dev, struct ifmap *map)
-{
-	if (dev->flags & IFF_UP)	/* can't act on a running interface */
-		return -EBUSY;
-
-	/* Don't allow changing the I/O address */
-	if (map->base_addr != dev->base_addr) {
-		pr_warn("%s: can't change I/O address\n", dev->name);
-		return -EOPNOTSUPP;
-	}
-
-	/* Don't allow changing the IRQ */
-	if (map->irq != dev->irq) {
-		pr_warn("%s: not change IRQ number %d\n", dev->name, dev->irq);
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
-
 /**
 /**
  *  stmmac_set_rx_mode - entry point for multicast addressing
  *  stmmac_set_rx_mode - entry point for multicast addressing
  *  @dev : pointer to the device structure
  *  @dev : pointer to the device structure
@@ -2600,7 +2579,6 @@ static const struct net_device_ops stmmac_netdev_ops = {
 	.ndo_set_rx_mode = stmmac_set_rx_mode,
 	.ndo_set_rx_mode = stmmac_set_rx_mode,
 	.ndo_tx_timeout = stmmac_tx_timeout,
 	.ndo_tx_timeout = stmmac_tx_timeout,
 	.ndo_do_ioctl = stmmac_ioctl,
 	.ndo_do_ioctl = stmmac_ioctl,
-	.ndo_set_config = stmmac_config,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = stmmac_poll_controller,
 	.ndo_poll_controller = stmmac_poll_controller,
 #endif
 #endif

+ 0 - 14
drivers/net/ethernet/ti/cpmac.c

@@ -313,19 +313,6 @@ static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, };
 
 
 static struct mii_bus *cpmac_mii;
 static struct mii_bus *cpmac_mii;
 
 
-static int cpmac_config(struct net_device *dev, struct ifmap *map)
-{
-	if (dev->flags & IFF_UP)
-		return -EBUSY;
-
-	/* Don't allow changing the I/O address */
-	if (map->base_addr != dev->base_addr)
-		return -EOPNOTSUPP;
-
-	/* ignore other fields */
-	return 0;
-}
-
 static void cpmac_set_multicast_list(struct net_device *dev)
 static void cpmac_set_multicast_list(struct net_device *dev)
 {
 {
 	struct netdev_hw_addr *ha;
 	struct netdev_hw_addr *ha;
@@ -1100,7 +1087,6 @@ static const struct net_device_ops cpmac_netdev_ops = {
 	.ndo_tx_timeout		= cpmac_tx_timeout,
 	.ndo_tx_timeout		= cpmac_tx_timeout,
 	.ndo_set_rx_mode	= cpmac_set_multicast_list,
 	.ndo_set_rx_mode	= cpmac_set_multicast_list,
 	.ndo_do_ioctl		= cpmac_ioctl,
 	.ndo_do_ioctl		= cpmac_ioctl,
-	.ndo_set_config		= cpmac_config,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_set_mac_address	= eth_mac_addr,