Merge tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "No framework updates for the SPI API this time around aside from one
  small fix, just driver improvments.  Some highlights include:

   - New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
     controllers.

   - Modernisation of the OMAP McSPI controller driver, moving it to
     current APIs to enable support for a wider range of client drivers.

   - DMA support for the bcm2835 controller"

* tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (60 commits)
  spi: zynq: Remove execute bit
  spi: atmel: add support to FIFOs
  spi: atmel: update DT bindings documentation
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: pxa2xx: Constify ACPI device ids
  spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller
  spi: zynq: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
  spi: fsl-dspi: Use pinctrl PM helpers
  spi: davinci: change the lower limit of pre-scale divider to 1
  spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
  spi: spi-fsl-dspi: Enable TCF interrupt mode support
  spi: atmel: add support for the internal chip-select of the spi controller
  spi: spi-pxa2xx: remove legacy PXA DMA bits
  spi: pxa2xx: Make LPSS SPI general register optional
  spi: pxa2xx: Prepare for new Intel LPSS SPI type
  spi: pxa2xx: Differentiate Intel LPSS types
  spi: restore rx/tx_buf in case of unset CONFIG_HAS_DMA
  spi: rspi: Re-do the returning value of qspi_transfer_out_in
  spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
  spi: orion: Fix extended baud rates for each Armada SoCs
  ...

Documentation/devicetree/bindings/spi/spi-ath79.txt

@@ -0,0 +1,24 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
+
+Required properties:
+- compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
+- reg: Base address and size of the controllers memory area
+- clocks: phandle to the AHB clock.
+- clock-names: has to be "ahb".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@1F000000 {
+		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+		reg = <0x1F000000 0x10>;
+
+		clocks = <&pll 2>;
+		clock-names = "ahb";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};

Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt

@@ -1,7 +1,7 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.

Documentation/devicetree/bindings/spi/spi-orion.txt

@@ -1,7 +1,13 @@
 Marvell Orion SPI device
 
 Required properties:
-- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi".
+- compatible : should be on of the following:
+    - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs
+    - "marvell,armada-370-spi", for the Armada 370 SoCs
+    - "marvell,armada-375-spi", for the Armada 375 SoCs
+    - "marvell,armada-380-spi", for the Armada 38x SoCs
+    - "marvell,armada-390-spi", for the Armada 39x SoCs
+    - "marvell,armada-xp-spi", for the Armada XP SoCs
 - reg : offset and length of the register set for the device
 - cell-index : Which of multiple SPI controllers is this.
 Optional properties:

Documentation/devicetree/bindings/spi/spi-sirf.txt

@@ -1,7 +1,8 @@
 * CSR SiRFprimaII Serial Peripheral Interface
 
 Required properties:
-- compatible : Should be "sirf,prima2-spi"
+- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp"
+               or "sirf,atlas7-usp"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI interrupt
 - resets: phandle to the reset controller asserting this device in

Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt

@@ -0,0 +1,26 @@
+Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
+-------------------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "xlnx,zynqmp-qspi-1.0".
+- reg			: Physical base address and size of GQSPI registers map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- interrupt-parent	: Must be core interrupt controller.
+- clock-names		: List of input clock names - "ref_clk", "pclk"
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs		: Number of chip selects used.
+
+Example:
+	qspi: spi@ff0f0000 {
+		compatible = "xlnx,zynqmp-qspi-1.0";
+		clock-names = "ref_clk", "pclk";
+		clocks = <&misc_clk &misc_clk>;
+		interrupts = <0 15 4>;
+		interrupt-parent = <&gic>;
+		num-cs = <1>;
+		reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
+	};

Documentation/devicetree/bindings/spi/spi_atmel.txt

@@ -4,11 +4,16 @@ Required properties:
 - compatible : should be "atmel,at91rm9200-spi".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
-- cs-gpios: chipselects
+- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
+  Chip Select Active After Transfer feature).
 - clock-names: tuple listing input clock names.
 	Required elements: "spi_clk"
 - clocks: phandles to input clocks.
 
+Optional properties:
+- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
+  capable SPI controllers.
+
 Example:
 
 spi1: spi@fffcc000 {
@@ -20,6 +25,7 @@ spi1: spi@fffcc000 {
 	clocks = <&spi1_clk>;
 	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
+	atmel,fifo-size = <32>;
 	status = "okay";
 
 	mmc-slot@0 {

Documentation/devicetree/bindings/spi/spi_pl022.txt

@@ -4,9 +4,9 @@ Required properties:
 - compatible : "arm,pl022", "arm,primecell"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
+- num-cs : total number of chipselects
 
 Optional properties:
-- num-cs : total number of chipselects
 - cs-gpios : should specify GPIOs used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.

arch/mips/include/asm/mach-ath79/ath79_spi_platform.h

@@ -16,8 +16,4 @@ struct ath79_spi_platform_data {
 	unsigned	num_chipselect;
 };
 
-struct ath79_spi_controller_data {
-	unsigned	gpio;
-};
-
 #endif /* _ATH79_SPI_PLATFORM_H */

drivers/spi/Kconfig

@@ -77,6 +77,7 @@ config SPI_ATMEL
 
 config SPI_BCM2835
 	tristate "BCM2835 SPI controller"
+	depends on GPIOLIB
 	depends on ARCH_BCM2835 || COMPILE_TEST
 	depends on GPIOLIB
 	help
@@ -221,7 +222,7 @@ config SPI_FALCON
 
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select SPI_BITBANG
 	help
 	  This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
@@ -327,7 +328,7 @@ config SPI_MESON_SPIFC
 
 config SPI_OC_TINY
 	tristate "OpenCores tiny SPI"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select SPI_BITBANG
 	help
 	  This is the driver for OpenCores tiny SPI master controller.
@@ -394,16 +395,9 @@ config SPI_PPC4xx
 	help
 	  This selects a driver for the PPC4xx SPI Controller.
 
-config SPI_PXA2XX_PXADMA
-	bool "PXA2xx SSP legacy PXA DMA API support"
-	depends on SPI_PXA2XX && ARCH_PXA
-	help
-	  Enable PXA private legacy DMA API support. Note that this is
-	  deprecated in favor of generic DMA engine API.
-
 config SPI_PXA2XX_DMA
 	def_bool y
-	depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
+	depends on SPI_PXA2XX
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
@@ -429,6 +423,12 @@ config SPI_ROCKCHIP
 	  The main usecase of this controller is to use spi flash as boot
 	  device.
 
+config SPI_RB4XX
+	tristate "Mikrotik RB4XX SPI master"
+	depends on SPI_MASTER && ATH79
+	help
+	  SPI controller driver for the Mikrotik RB4xx series boards.
+
 config SPI_RSPI
 	tristate "Renesas RSPI/QSPI controller"
 	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
@@ -610,6 +610,12 @@ config SPI_XTENSA_XTFPGA
 	  16 bit words in SPI mode 0, automatically asserting CS on transfer
 	  start and deasserting on end.
 
+config SPI_ZYNQMP_GQSPI
+	tristate "Xilinx ZynqMP GQSPI controller"
+	depends on SPI_MASTER
+	help
+	  Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
+
 config SPI_NUC900
 	tristate "Nuvoton NUC900 series SPI"
 	depends on ARCH_W90X900

drivers/spi/Makefile

@@ -60,12 +60,12 @@ obj-$(CONFIG_SPI_ORION)			+= spi-orion.o
 obj-$(CONFIG_SPI_PL022)			+= spi-pl022.o
 obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
 spi-pxa2xx-platform-objs		:= spi-pxa2xx.o
-spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA)	+= spi-pxa2xx-pxadma.o
 spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)	+= spi-pxa2xx-dma.o
 obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
 obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
 obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
 obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
 obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
 spi-s3c24xx-hw-y			:= spi-s3c24xx.o
@@ -89,3 +89,4 @@ obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
 obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
 obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o
+obj-$(CONFIG_SPI_ZYNQMP_GQSPI)		+= spi-zynqmp-gqspi.o

drivers/spi/spi-ath79.c

@@ -79,10 +79,8 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
 	}
 
 	if (spi->chip_select) {
-		struct ath79_spi_controller_data *cdata = spi->controller_data;
-
 		/* SPI is normally active-low */
-		gpio_set_value(cdata->gpio, cs_high);
+		gpio_set_value(spi->cs_gpio, cs_high);
 	} else {
 		if (cs_high)
 			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
@@ -117,11 +115,10 @@ static void ath79_spi_disable(struct ath79_spi *sp)
 
 static int ath79_spi_setup_cs(struct spi_device *spi)
 {
-	struct ath79_spi_controller_data *cdata;
+	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
 	int status;
 
-	cdata = spi->controller_data;
-	if (spi->chip_select && !cdata)
+	if (spi->chip_select && !gpio_is_valid(spi->cs_gpio))
 		return -EINVAL;
 
 	status = 0;
@@ -134,8 +131,15 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
 		else
 			flags |= GPIOF_INIT_HIGH;
 
-		status = gpio_request_one(cdata->gpio, flags,
+		status = gpio_request_one(spi->cs_gpio, flags,
 					  dev_name(&spi->dev));
+	} else {
+		if (spi->mode & SPI_CS_HIGH)
+			sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+		else
+			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+
+		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
 	}
 
 	return status;
@@ -144,8 +148,7 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
 static void ath79_spi_cleanup_cs(struct spi_device *spi)
 {
 	if (spi->chip_select) {
-		struct ath79_spi_controller_data *cdata = spi->controller_data;
-		gpio_free(cdata->gpio);
+		gpio_free(spi->cs_gpio);
 	}
 }
 
@@ -217,6 +220,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	}
 
 	sp = spi_master_get_devdata(master);
+	master->dev.of_node = pdev->dev.of_node;
 	platform_set_drvdata(pdev, sp);
 
 	pdata = dev_get_platdata(&pdev->dev);
@@ -253,7 +257,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 		goto err_put_master;
 	}
 
-	ret = clk_enable(sp->clk);
+	ret = clk_prepare_enable(sp->clk);
 	if (ret)
 		goto err_put_master;
 
@@ -277,7 +281,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 err_disable:
 	ath79_spi_disable(sp);
 err_clk_disable:
-	clk_disable(sp->clk);
+	clk_disable_unprepare(sp->clk);
 err_put_master:
 	spi_master_put(sp->bitbang.master);
 
@@ -290,7 +294,7 @@ static int ath79_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&sp->bitbang);
 	ath79_spi_disable(sp);
-	clk_disable(sp->clk);
+	clk_disable_unprepare(sp->clk);
 	spi_master_put(sp->bitbang.master);
 
 	return 0;
@@ -301,12 +305,18 @@ static void ath79_spi_shutdown(struct platform_device *pdev)
 	ath79_spi_remove(pdev);
 }
 
+static const struct of_device_id ath79_spi_of_match[] = {
+	{ .compatible = "qca,ar7100-spi", },
+	{ },
+};
+
 static struct platform_driver ath79_spi_driver = {
 	.probe		= ath79_spi_probe,
 	.remove		= ath79_spi_remove,
 	.shutdown	= ath79_spi_shutdown,
 	.driver		= {
 		.name	= DRV_NAME,
+		.of_match_table = ath79_spi_of_match,
 	},
 };
 module_platform_driver(ath79_spi_driver);

drivers/spi/spi-atmel.c

@@ -41,6 +41,8 @@
 #define SPI_CSR1				0x0034
 #define SPI_CSR2				0x0038
 #define SPI_CSR3				0x003c
+#define SPI_FMR					0x0040
+#define SPI_FLR					0x0044
 #define SPI_VERSION				0x00fc
 #define SPI_RPR					0x0100
 #define SPI_RCR					0x0104
@@ -62,6 +64,14 @@
 #define SPI_SWRST_SIZE				1
 #define SPI_LASTXFER_OFFSET			24
 #define SPI_LASTXFER_SIZE			1
+#define SPI_TXFCLR_OFFSET			16
+#define SPI_TXFCLR_SIZE				1
+#define SPI_RXFCLR_OFFSET			17
+#define SPI_RXFCLR_SIZE				1
+#define SPI_FIFOEN_OFFSET			30
+#define SPI_FIFOEN_SIZE				1
+#define SPI_FIFODIS_OFFSET			31
+#define SPI_FIFODIS_SIZE			1
 
 /* Bitfields in MR */
 #define SPI_MSTR_OFFSET				0
@@ -114,6 +124,22 @@
 #define SPI_TXEMPTY_SIZE			1
 #define SPI_SPIENS_OFFSET			16
 #define SPI_SPIENS_SIZE				1
+#define SPI_TXFEF_OFFSET			24
+#define SPI_TXFEF_SIZE				1
+#define SPI_TXFFF_OFFSET			25
+#define SPI_TXFFF_SIZE				1
+#define SPI_TXFTHF_OFFSET			26
+#define SPI_TXFTHF_SIZE				1
+#define SPI_RXFEF_OFFSET			27
+#define SPI_RXFEF_SIZE				1
+#define SPI_RXFFF_OFFSET			28
+#define SPI_RXFFF_SIZE				1
+#define SPI_RXFTHF_OFFSET			29
+#define SPI_RXFTHF_SIZE				1
+#define SPI_TXFPTEF_OFFSET			30
+#define SPI_TXFPTEF_SIZE			1
+#define SPI_RXFPTEF_OFFSET			31
+#define SPI_RXFPTEF_SIZE			1
 
 /* Bitfields in CSR0 */
 #define SPI_CPOL_OFFSET				0
@@ -157,6 +183,22 @@
 #define SPI_TXTDIS_OFFSET			9
 #define SPI_TXTDIS_SIZE				1
 
+/* Bitfields in FMR */
+#define SPI_TXRDYM_OFFSET			0
+#define SPI_TXRDYM_SIZE				2
+#define SPI_RXRDYM_OFFSET			4
+#define SPI_RXRDYM_SIZE				2
+#define SPI_TXFTHRES_OFFSET			16
+#define SPI_TXFTHRES_SIZE			6
+#define SPI_RXFTHRES_OFFSET			24
+#define SPI_RXFTHRES_SIZE			6
+
+/* Bitfields in FLR */
+#define SPI_TXFL_OFFSET				0
+#define SPI_TXFL_SIZE				6
+#define SPI_RXFL_OFFSET				16
+#define SPI_RXFL_SIZE				6
+
 /* Constants for BITS */
 #define SPI_BITS_8_BPT				0
 #define SPI_BITS_9_BPT				1
@@ -167,6 +209,9 @@
 #define SPI_BITS_14_BPT				6
 #define SPI_BITS_15_BPT				7
 #define SPI_BITS_16_BPT				8
+#define SPI_ONE_DATA				0
+#define SPI_TWO_DATA				1
+#define SPI_FOUR_DATA				2
 
 /* Bit manipulation macros */
 #define SPI_BIT(name) \
@@ -185,11 +230,31 @@
 	__raw_readl((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
 	__raw_writel((value), (port)->regs + SPI_##reg)
+
+#define spi_readw(port, reg) \
+	__raw_readw((port)->regs + SPI_##reg)
+#define spi_writew(port, reg, value) \
+	__raw_writew((value), (port)->regs + SPI_##reg)
+
+#define spi_readb(port, reg) \
+	__raw_readb((port)->regs + SPI_##reg)
+#define spi_writeb(port, reg, value) \
+	__raw_writeb((value), (port)->regs + SPI_##reg)
 #else
 #define spi_readl(port, reg) \
 	readl_relaxed((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
 	writel_relaxed((value), (port)->regs + SPI_##reg)
+
+#define spi_readw(port, reg) \
+	readw_relaxed((port)->regs + SPI_##reg)
+#define spi_writew(port, reg, value) \
+	writew_relaxed((value), (port)->regs + SPI_##reg)
+
+#define spi_readb(port, reg) \
+	readb_relaxed((port)->regs + SPI_##reg)
+#define spi_writeb(port, reg, value) \
+	writeb_relaxed((value), (port)->regs + SPI_##reg)
 #endif
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
  * cache operations; better heuristics consider wordsize and bitrate.
@@ -246,11 +311,14 @@ struct atmel_spi {
 
 	bool			use_dma;
 	bool			use_pdc;
+	bool			use_cs_gpios;
 	/* dmaengine data */
 	struct atmel_spi_dma	dma;
 
 	bool			keep_cs;
 	bool			cs_active;
+
+	u32			fifo_size;
 };
 
 /* Controller-specific per-slave state */
@@ -321,7 +389,8 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
 		}
 
 		mr = spi_readl(as, MR);
-		gpio_set_value(asd->npcs_pin, active);
+		if (as->use_cs_gpios)
+			gpio_set_value(asd->npcs_pin, active);
 	} else {
 		u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
 		int i;
@@ -337,7 +406,7 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
 
 		mr = spi_readl(as, MR);
 		mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
-		if (spi->chip_select != 0)
+		if (as->use_cs_gpios && spi->chip_select != 0)
 			gpio_set_value(asd->npcs_pin, active);
 		spi_writel(as, MR, mr);
 	}
@@ -366,7 +435,9 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
 			asd->npcs_pin, active ? " (low)" : "",
 			mr);
 
-	if (atmel_spi_is_v2(as) || spi->chip_select != 0)
+	if (!as->use_cs_gpios)
+		spi_writel(as, CR, SPI_BIT(LASTXFER));
+	else if (atmel_spi_is_v2(as) || spi->chip_select != 0)
 		gpio_set_value(asd->npcs_pin, !active);
 }
 
@@ -406,6 +477,20 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
 	slave_config->dst_maxburst = 1;
 	slave_config->device_fc = false;
 
+	/*
+	 * This driver uses fixed peripheral select mode (PS bit set to '0' in
+	 * the Mode Register).
+	 * So according to the datasheet, when FIFOs are available (and
+	 * enabled), the Transmit FIFO operates in Multiple Data Mode.
+	 * In this mode, up to 2 data, not 4, can be written into the Transmit
+	 * Data Register in a single access.
+	 * However, the first data has to be written into the lowest 16 bits and
+	 * the second data into the highest 16 bits of the Transmit
+	 * Data Register. For 8bit data (the most frequent case), it would
+	 * require to rework tx_buf so each data would actualy fit 16 bits.
+	 * So we'd rather write only one data at the time. Hence the transmit
+	 * path works the same whether FIFOs are available (and enabled) or not.
+	 */
 	slave_config->direction = DMA_MEM_TO_DEV;
 	if (dmaengine_slave_config(as->dma.chan_tx, slave_config)) {
 		dev_err(&as->pdev->dev,
@@ -413,6 +498,14 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
 		err = -EINVAL;
 	}
 
+	/*
+	 * This driver configures the spi controller for master mode (MSTR bit
+	 * set to '1' in the Mode Register).
+	 * So according to the datasheet, when FIFOs are available (and
+	 * enabled), the Receive FIFO operates in Single Data Mode.
+	 * So the receive path works the same whether FIFOs are available (and
+	 * enabled) or not.
+	 */
 	slave_config->direction = DMA_DEV_TO_MEM;
 	if (dmaengine_slave_config(as->dma.chan_rx, slave_config)) {
 		dev_err(&as->pdev->dev,
@@ -502,10 +595,10 @@ static void dma_callback(void *data)
 }
 
 /*
- * Next transfer using PIO.
+ * Next transfer using PIO without FIFO.
  */
-static void atmel_spi_next_xfer_pio(struct spi_master *master,
-				struct spi_transfer *xfer)
+static void atmel_spi_next_xfer_single(struct spi_master *master,
+				       struct spi_transfer *xfer)
 {
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 	unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
@@ -537,6 +630,99 @@ static void atmel_spi_next_xfer_pio(struct spi_master *master,
 	spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
 }
 
+/*
+ * Next transfer using PIO with FIFO.
+ */
+static void atmel_spi_next_xfer_fifo(struct spi_master *master,
+				     struct spi_transfer *xfer)
+{
+	struct atmel_spi *as = spi_master_get_devdata(master);
+	u32 current_remaining_data, num_data;
+	u32 offset = xfer->len - as->current_remaining_bytes;
+	const u16 *words = (const u16 *)((u8 *)xfer->tx_buf + offset);
+	const u8  *bytes = (const u8  *)((u8 *)xfer->tx_buf + offset);
+	u16 td0, td1;
+	u32 fifomr;
+
+	dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_fifo\n");
+
+	/* Compute the number of data to transfer in the current iteration */
+	current_remaining_data = ((xfer->bits_per_word > 8) ?
+				  ((u32)as->current_remaining_bytes >> 1) :
+				  (u32)as->current_remaining_bytes);
+	num_data = min(current_remaining_data, as->fifo_size);
+
+	/* Flush RX and TX FIFOs */
+	spi_writel(as, CR, SPI_BIT(RXFCLR) | SPI_BIT(TXFCLR));
+	while (spi_readl(as, FLR))
+		cpu_relax();
+
+	/* Set RX FIFO Threshold to the number of data to transfer */
+	fifomr = spi_readl(as, FMR);
+	spi_writel(as, FMR, SPI_BFINS(RXFTHRES, num_data, fifomr));
+
+	/* Clear FIFO flags in the Status Register, especially RXFTHF */
+	(void)spi_readl(as, SR);
+
+	/* Fill TX FIFO */
+	while (num_data >= 2) {
+		if (xfer->tx_buf) {
+			if (xfer->bits_per_word > 8) {
+				td0 = *words++;
+				td1 = *words++;
+			} else {
+				td0 = *bytes++;
+				td1 = *bytes++;
+			}
+		} else {
+			td0 = 0;
+			td1 = 0;
+		}
+
+		spi_writel(as, TDR, (td1 << 16) | td0);
+		num_data -= 2;
+	}
+
+	if (num_data) {
+		if (xfer->tx_buf) {
+			if (xfer->bits_per_word > 8)
+				td0 = *words++;
+			else
+				td0 = *bytes++;
+		} else {
+			td0 = 0;
+		}
+
+		spi_writew(as, TDR, td0);
+		num_data--;
+	}
+
+	dev_dbg(master->dev.parent,
+		"  start fifo xfer %p: len %u tx %p rx %p bitpw %d\n",
+		xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
+		xfer->bits_per_word);
+
+	/*
+	 * Enable RX FIFO Threshold Flag interrupt to be notified about
+	 * transfer completion.
+	 */
+	spi_writel(as, IER, SPI_BIT(RXFTHF) | SPI_BIT(OVRES));
+}
+
+/*
+ * Next transfer using PIO.
+ */
+static void atmel_spi_next_xfer_pio(struct spi_master *master,
+				    struct spi_transfer *xfer)
+{
+	struct atmel_spi *as = spi_master_get_devdata(master);
+
+	if (as->fifo_size)
+		atmel_spi_next_xfer_fifo(master, xfer);
+	else
+		atmel_spi_next_xfer_single(master, xfer);
+}
+
 /*
  * Submit next transfer for DMA.
  */
@@ -839,13 +1025,8 @@ static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as)
 	spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
 }
 
-/* Called from IRQ
- *
- * Must update "current_remaining_bytes" to keep track of data
- * to transfer.
- */
 static void
-atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
+atmel_spi_pump_single_data(struct atmel_spi *as, struct spi_transfer *xfer)
 {
 	u8		*rxp;
 	u16		*rxp16;
@@ -872,6 +1053,57 @@ atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
 	}
 }
 
+static void
+atmel_spi_pump_fifo_data(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+	u32 fifolr = spi_readl(as, FLR);
+	u32 num_bytes, num_data = SPI_BFEXT(RXFL, fifolr);
+	u32 offset = xfer->len - as->current_remaining_bytes;
+	u16 *words = (u16 *)((u8 *)xfer->rx_buf + offset);
+	u8  *bytes = (u8  *)((u8 *)xfer->rx_buf + offset);
+	u16 rd; /* RD field is the lowest 16 bits of RDR */
+
+	/* Update the number of remaining bytes to transfer */
+	num_bytes = ((xfer->bits_per_word > 8) ?
+		     (num_data << 1) :
+		     num_data);
+
+	if (as->current_remaining_bytes > num_bytes)
+		as->current_remaining_bytes -= num_bytes;
+	else
+		as->current_remaining_bytes = 0;
+
+	/* Handle odd number of bytes when data are more than 8bit width */
+	if (xfer->bits_per_word > 8)
+		as->current_remaining_bytes &= ~0x1;
+
+	/* Read data */
+	while (num_data) {
+		rd = spi_readl(as, RDR);
+		if (xfer->rx_buf) {
+			if (xfer->bits_per_word > 8)
+				*words++ = rd;
+			else
+				*bytes++ = rd;
+		}
+		num_data--;
+	}
+}
+
+/* Called from IRQ
+ *
+ * Must update "current_remaining_bytes" to keep track of data
+ * to transfer.
+ */
+static void
+atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+	if (as->fifo_size)
+		atmel_spi_pump_fifo_data(as, xfer);
+	else
+		atmel_spi_pump_single_data(as, xfer);
+}
+
 /* Interrupt
  *
  * No need for locking in this Interrupt handler: done_status is the
@@ -912,7 +1144,7 @@ atmel_spi_pio_interrupt(int irq, void *dev_id)
 
 		complete(&as->xfer_completion);
 
-	} else if (pending & SPI_BIT(RDRF)) {
+	} else if (pending & (SPI_BIT(RDRF) | SPI_BIT(RXFTHF))) {
 		atmel_spi_lock(as);
 
 		if (as->current_remaining_bytes) {
@@ -996,6 +1228,8 @@ static int atmel_spi_setup(struct spi_device *spi)
 		csr |= SPI_BIT(CPOL);
 	if (!(spi->mode & SPI_CPHA))
 		csr |= SPI_BIT(NCPHA);
+	if (!as->use_cs_gpios)
+		csr |= SPI_BIT(CSAAT);
 
 	/* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
 	 *
@@ -1009,7 +1243,9 @@ static int atmel_spi_setup(struct spi_device *spi)
 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
 	npcs_pin = (unsigned long)spi->controller_data;
 
-	if (gpio_is_valid(spi->cs_gpio))
+	if (!as->use_cs_gpios)
+		npcs_pin = spi->chip_select;
+	else if (gpio_is_valid(spi->cs_gpio))
 		npcs_pin = spi->cs_gpio;
 
 	asd = spi->controller_state;
@@ -1018,15 +1254,19 @@ static int atmel_spi_setup(struct spi_device *spi)
 		if (!asd)
 			return -ENOMEM;
 
-		ret = gpio_request(npcs_pin, dev_name(&spi->dev));
-		if (ret) {
-			kfree(asd);
-			return ret;
+		if (as->use_cs_gpios) {
+			ret = gpio_request(npcs_pin, dev_name(&spi->dev));
+			if (ret) {
+				kfree(asd);
+				return ret;
+			}
+
+			gpio_direction_output(npcs_pin,
+					      !(spi->mode & SPI_CS_HIGH));
 		}
 
 		asd->npcs_pin = npcs_pin;
 		spi->controller_state = asd;
-		gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
 	}
 
 	asd->csr = csr;
@@ -1338,6 +1578,13 @@ static int atmel_spi_probe(struct platform_device *pdev)
 
 	atmel_get_caps(as);
 
+	as->use_cs_gpios = true;
+	if (atmel_spi_is_v2(as) &&
+	    !of_get_property(pdev->dev.of_node, "cs-gpios", NULL)) {
+		as->use_cs_gpios = false;
+		master->num_chipselect = 4;
+	}
+
 	as->use_dma = false;
 	as->use_pdc = false;
 	if (as->caps.has_dma_support) {
@@ -1380,6 +1627,13 @@ static int atmel_spi_probe(struct platform_device *pdev)
 		spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
 	spi_writel(as, CR, SPI_BIT(SPIEN));
 
+	as->fifo_size = 0;
+	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
+				  &as->fifo_size)) {
+		dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size);
+		spi_writel(as, CR, SPI_BIT(FIFOEN));
+	}
+
 	/* go! */
 	dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
 			(unsigned long)regs->start, irq);

drivers/spi/spi-bcm2835.c

@@ -20,18 +20,22 @@
  * GNU General Public License for more details.
  */
 
+#include <asm/page.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
 #include <linux/spi/spi.h>
 
 /* SPI register offsets */
@@ -69,7 +73,8 @@
 #define BCM2835_SPI_CS_CS_01		0x00000001
 
 #define BCM2835_SPI_POLLING_LIMIT_US	30
-#define BCM2835_SPI_TIMEOUT_MS		30000
+#define BCM2835_SPI_POLLING_JIFFIES	2
+#define BCM2835_SPI_DMA_MIN_LENGTH	96
 #define BCM2835_SPI_MODE_BITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
 				| SPI_NO_CS | SPI_3WIRE)
 
@@ -83,6 +88,7 @@ struct bcm2835_spi {
 	u8 *rx_buf;
 	int tx_len;
 	int rx_len;
+	bool dma_pending;
 };
 
 static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
@@ -128,12 +134,15 @@ static void bcm2835_spi_reset_hw(struct spi_master *master)
 	/* Disable SPI interrupts and transfer */
 	cs &= ~(BCM2835_SPI_CS_INTR |
 		BCM2835_SPI_CS_INTD |
+		BCM2835_SPI_CS_DMAEN |
 		BCM2835_SPI_CS_TA);
 	/* and reset RX/TX FIFOS */
 	cs |= BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX;
 
 	/* and reset the SPI_HW */
 	bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+	/* as well as DLEN */
+	bcm2835_wr(bs, BCM2835_SPI_DLEN, 0);
 }
 
 static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
@@ -157,42 +166,6 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
-					 struct spi_device *spi,
-					 struct spi_transfer *tfr,
-					 u32 cs,
-					 unsigned long xfer_time_us)
-{
-	struct bcm2835_spi *bs = spi_master_get_devdata(master);
-	/* set timeout to 1 second of maximum polling */
-	unsigned long timeout = jiffies + HZ;
-
-	/* enable HW block without interrupts */
-	bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
-
-	/* loop until finished the transfer */
-	while (bs->rx_len) {
-		/* read from fifo as much as possible */
-		bcm2835_rd_fifo(bs);
-		/* fill in tx fifo as much as possible */
-		bcm2835_wr_fifo(bs);
-		/* if we still expect some data after the read,
-		 * check for a possible timeout
-		 */
-		if (bs->rx_len && time_after(jiffies, timeout)) {
-			/* Transfer complete - reset SPI HW */
-			bcm2835_spi_reset_hw(master);
-			/* and return timeout */
-			return -ETIMEDOUT;
-		}
-	}
-
-	/* Transfer complete - reset SPI HW */
-	bcm2835_spi_reset_hw(master);
-	/* and return without waiting for completion */
-	return 0;
-}
-
 static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
 					struct spi_device *spi,
 					struct spi_transfer *tfr,
@@ -229,6 +202,329 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
 	return 1;
 }
 
+/*
+ * DMA support
+ *
+ * this implementation has currently a few issues in so far as it does
+ * not work arrount limitations of the HW.
+ *
+ * the main one being that DMA transfers are limited to 16 bit
+ * (so 0 to 65535 bytes) by the SPI HW due to BCM2835_SPI_DLEN
+ *
+ * also we currently assume that the scatter-gather fragments are
+ * all multiple of 4 (except the last) - otherwise we would need
+ * to reset the FIFO before subsequent transfers...
+ * this also means that tx/rx transfers sg's need to be of equal size!
+ *
+ * there may be a few more border-cases we may need to address as well
+ * but unfortunately this would mean splitting up the scatter-gather
+ * list making it slightly unpractical...
+ */
+static void bcm2835_spi_dma_done(void *data)
+{
+	struct spi_master *master = data;
+	struct bcm2835_spi *bs = spi_master_get_devdata(master);
+
+	/* reset fifo and HW */
+	bcm2835_spi_reset_hw(master);
+
+	/* and terminate tx-dma as we do not have an irq for it
+	 * because when the rx dma will terminate and this callback
+	 * is called the tx-dma must have finished - can't get to this
+	 * situation otherwise...
+	 */
+	dmaengine_terminate_all(master->dma_tx);
+
+	/* mark as no longer pending */
+	bs->dma_pending = 0;
+
+	/* and mark as completed */;
+	complete(&master->xfer_completion);
+}
+
+static int bcm2835_spi_prepare_sg(struct spi_master *master,
+				  struct spi_transfer *tfr,
+				  bool is_tx)
+{
+	struct dma_chan *chan;
+	struct scatterlist *sgl;
+	unsigned int nents;
+	enum dma_transfer_direction dir;
+	unsigned long flags;
+
+	struct dma_async_tx_descriptor *desc;
+	dma_cookie_t cookie;
+
+	if (is_tx) {
+		dir   = DMA_MEM_TO_DEV;
+		chan  = master->dma_tx;
+		nents = tfr->tx_sg.nents;
+		sgl   = tfr->tx_sg.sgl;
+		flags = 0 /* no  tx interrupt */;
+
+	} else {
+		dir   = DMA_DEV_TO_MEM;
+		chan  = master->dma_rx;
+		nents = tfr->rx_sg.nents;
+		sgl   = tfr->rx_sg.sgl;
+		flags = DMA_PREP_INTERRUPT;
+	}
+	/* prepare the channel */
+	desc = dmaengine_prep_slave_sg(chan, sgl, nents, dir, flags);
+	if (!desc)
+		return -EINVAL;
+
+	/* set callback for rx */
+	if (!is_tx) {
+		desc->callback = bcm2835_spi_dma_done;
+		desc->callback_param = master;
+	}
+
+	/* submit it to DMA-engine */
+	cookie = dmaengine_submit(desc);
+
+	return dma_submit_error(cookie);
+}
+
+static inline int bcm2835_check_sg_length(struct sg_table *sgt)
+{
+	int i;
+	struct scatterlist *sgl;
+
+	/* check that the sg entries are word-sized (except for last) */
+	for_each_sg(sgt->sgl, sgl, (int)sgt->nents - 1, i) {
+		if (sg_dma_len(sgl) % 4)
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int bcm2835_spi_transfer_one_dma(struct spi_master *master,
+					struct spi_device *spi,
+					struct spi_transfer *tfr,
+					u32 cs)
+{
+	struct bcm2835_spi *bs = spi_master_get_devdata(master);
+	int ret;
+
+	/* check that the scatter gather segments are all a multiple of 4 */
+	if (bcm2835_check_sg_length(&tfr->tx_sg) ||
+	    bcm2835_check_sg_length(&tfr->rx_sg)) {
+		dev_warn_once(&spi->dev,
+			      "scatter gather segment length is not a multiple of 4 - falling back to interrupt mode\n");
+		return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
+	}
+
+	/* setup tx-DMA */
+	ret = bcm2835_spi_prepare_sg(master, tfr, true);
+	if (ret)
+		return ret;
+
+	/* start TX early */
+	dma_async_issue_pending(master->dma_tx);
+
+	/* mark as dma pending */
+	bs->dma_pending = 1;
+
+	/* set the DMA length */
+	bcm2835_wr(bs, BCM2835_SPI_DLEN, tfr->len);
+
+	/* start the HW */
+	bcm2835_wr(bs, BCM2835_SPI_CS,
+		   cs | BCM2835_SPI_CS_TA | BCM2835_SPI_CS_DMAEN);
+
+	/* setup rx-DMA late - to run transfers while
+	 * mapping of the rx buffers still takes place
+	 * this saves 10us or more.
+	 */
+	ret = bcm2835_spi_prepare_sg(master, tfr, false);
+	if (ret) {
+		/* need to reset on errors */
+		dmaengine_terminate_all(master->dma_tx);
+		bcm2835_spi_reset_hw(master);
+		return ret;
+	}
+
+	/* start rx dma late */
+	dma_async_issue_pending(master->dma_rx);
+
+	/* wait for wakeup in framework */
+	return 1;
+}
+
+static bool bcm2835_spi_can_dma(struct spi_master *master,
+				struct spi_device *spi,
+				struct spi_transfer *tfr)
+{
+	/* only run for gpio_cs */
+	if (!gpio_is_valid(spi->cs_gpio))
+		return false;
+
+	/* we start DMA efforts only on bigger transfers */
+	if (tfr->len < BCM2835_SPI_DMA_MIN_LENGTH)
+		return false;
+
+	/* BCM2835_SPI_DLEN has defined a max transfer size as
+	 * 16 bit, so max is 65535
+	 * we can revisit this by using an alternative transfer
+	 * method - ideally this would get done without any more
+	 * interaction...
+	 */
+	if (tfr->len > 65535) {
+		dev_warn_once(&spi->dev,
+			      "transfer size of %d too big for dma-transfer\n",
+			      tfr->len);
+		return false;
+	}
+
+	/* if we run rx/tx_buf with word aligned addresses then we are OK */
+	if ((((size_t)tfr->rx_buf & 3) == 0) &&
+	    (((size_t)tfr->tx_buf & 3) == 0))
+		return true;
+
+	/* otherwise we only allow transfers within the same page
+	 * to avoid wasting time on dma_mapping when it is not practical
+	 */
+	if (((size_t)tfr->tx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) {
+		dev_warn_once(&spi->dev,
+			      "Unaligned spi tx-transfer bridging page\n");
+		return false;
+	}
+	if (((size_t)tfr->rx_buf & PAGE_MASK) + tfr->len > PAGE_SIZE) {
+		dev_warn_once(&spi->dev,
+			      "Unaligned spi tx-transfer bridging page\n");
+		return false;
+	}
+
+	/* return OK */
+	return true;
+}
+
+static void bcm2835_dma_release(struct spi_master *master)
+{
+	if (master->dma_tx) {
+		dmaengine_terminate_all(master->dma_tx);
+		dma_release_channel(master->dma_tx);
+		master->dma_tx = NULL;
+	}
+	if (master->dma_rx) {
+		dmaengine_terminate_all(master->dma_rx);
+		dma_release_channel(master->dma_rx);
+		master->dma_rx = NULL;
+	}
+}
+
+static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
+{
+	struct dma_slave_config slave_config;
+	const __be32 *addr;
+	dma_addr_t dma_reg_base;
+	int ret;
+
+	/* base address in dma-space */
+	addr = of_get_address(master->dev.of_node, 0, NULL, NULL);
+	if (!addr) {
+		dev_err(dev, "could not get DMA-register address - not using dma mode\n");
+		goto err;
+	}
+	dma_reg_base = be32_to_cpup(addr);
+
+	/* get tx/rx dma */
+	master->dma_tx = dma_request_slave_channel(dev, "tx");
+	if (!master->dma_tx) {
+		dev_err(dev, "no tx-dma configuration found - not using dma mode\n");
+		goto err;
+	}
+	master->dma_rx = dma_request_slave_channel(dev, "rx");
+	if (!master->dma_rx) {
+		dev_err(dev, "no rx-dma configuration found - not using dma mode\n");
+		goto err_release;
+	}
+
+	/* configure DMAs */
+	slave_config.direction = DMA_MEM_TO_DEV;
+	slave_config.dst_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
+	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	ret = dmaengine_slave_config(master->dma_tx, &slave_config);
+	if (ret)
+		goto err_config;
+
+	slave_config.direction = DMA_DEV_TO_MEM;
+	slave_config.src_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
+	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	ret = dmaengine_slave_config(master->dma_rx, &slave_config);
+	if (ret)
+		goto err_config;
+
+	/* all went well, so set can_dma */
+	master->can_dma = bcm2835_spi_can_dma;
+	master->max_dma_len = 65535; /* limitation by BCM2835_SPI_DLEN */
+	/* need to do TX AND RX DMA, so we need dummy buffers */
+	master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+
+	return;
+
+err_config:
+	dev_err(dev, "issue configuring dma: %d - not using DMA mode\n",
+		ret);
+err_release:
+	bcm2835_dma_release(master);
+err:
+	return;
+}
+
+static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
+					 struct spi_device *spi,
+					 struct spi_transfer *tfr,
+					 u32 cs,
+					 unsigned long xfer_time_us)
+{
+	struct bcm2835_spi *bs = spi_master_get_devdata(master);
+	unsigned long timeout;
+
+	/* enable HW block without interrupts */
+	bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
+
+	/* fill in the fifo before timeout calculations
+	 * if we are interrupted here, then the data is
+	 * getting transferred by the HW while we are interrupted
+	 */
+	bcm2835_wr_fifo(bs);
+
+	/* set the timeout */
+	timeout = jiffies + BCM2835_SPI_POLLING_JIFFIES;
+
+	/* loop until finished the transfer */
+	while (bs->rx_len) {
+		/* fill in tx fifo with remaining data */
+		bcm2835_wr_fifo(bs);
+
+		/* read from fifo as much as possible */
+		bcm2835_rd_fifo(bs);
+
+		/* if there is still data pending to read
+		 * then check the timeout
+		 */
+		if (bs->rx_len && time_after(jiffies, timeout)) {
+			dev_dbg_ratelimited(&spi->dev,
+					    "timeout period reached: jiffies: %lu remaining tx/rx: %d/%d - falling back to interrupt mode\n",
+					    jiffies - timeout,
+					    bs->tx_len, bs->rx_len);
+			/* fall back to interrupt mode */
+			return bcm2835_spi_transfer_one_irq(master, spi,
+							    tfr, cs);
+		}
+	}
+
+	/* Transfer complete - reset SPI HW */
+	bcm2835_spi_reset_hw(master);
+	/* and return without waiting for completion */
+	return 0;
+}
+
 static int bcm2835_spi_transfer_one(struct spi_master *master,
 				    struct spi_device *spi,
 				    struct spi_transfer *tfr)
@@ -288,12 +584,26 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
 		return bcm2835_spi_transfer_one_poll(master, spi, tfr,
 						     cs, xfer_time_us);
 
+	/* run in dma mode if conditions are right */
+	if (master->can_dma && bcm2835_spi_can_dma(master, spi, tfr))
+		return bcm2835_spi_transfer_one_dma(master, spi, tfr, cs);
+
+	/* run in interrupt-mode */
 	return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
 }
 
 static void bcm2835_spi_handle_err(struct spi_master *master,
 				   struct spi_message *msg)
 {
+	struct bcm2835_spi *bs = spi_master_get_devdata(master);
+
+	/* if an error occurred and we have an active dma, then terminate */
+	if (bs->dma_pending) {
+		dmaengine_terminate_all(master->dma_tx);
+		dmaengine_terminate_all(master->dma_rx);
+		bs->dma_pending = 0;
+	}
+	/* and reset */
 	bcm2835_spi_reset_hw(master);
 }
 
@@ -463,6 +773,8 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 		goto out_clk_disable;
 	}
 
+	bcm2835_dma_init(master, &pdev->dev);
+
 	/* initialise the hardware with the default polarities */
 	bcm2835_wr(bs, BCM2835_SPI_CS,
 		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
@@ -493,6 +805,8 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(bs->clk);
 
+	bcm2835_dma_release(master);
+
 	return 0;
 }
 

drivers/spi/spi-davinci.c

@@ -265,7 +265,7 @@ static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
 
 	ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz);
 
-	if (ret < 3 || ret > 256)
+	if (ret < 1 || ret > 256)
 		return -EINVAL;
 
 	return ret - 1;

drivers/spi/spi-fsl-dspi.c

@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -47,6 +48,7 @@
 #define SPI_MCR_CLR_RXF	(1 << 10)
 
 #define SPI_TCR			0x08
+#define SPI_TCR_GET_TCNT(x)	(((x) & 0xffff0000) >> 16)
 
 #define SPI_CTAR(x)		(0x0c + (((x) & 0x3) * 4))
 #define SPI_CTAR_FMSZ(x)	(((x) & 0x0000000f) << 27)
@@ -67,9 +69,11 @@
 
 #define SPI_SR			0x2c
 #define SPI_SR_EOQF		0x10000000
+#define SPI_SR_TCFQF		0x80000000
 
 #define SPI_RSER		0x30
 #define SPI_RSER_EOQFE		0x10000000
+#define SPI_RSER_TCFQE		0x80000000
 
 #define SPI_PUSHR		0x34
 #define SPI_PUSHR_CONT		(1 << 31)
@@ -102,12 +106,35 @@
 #define SPI_CS_ASSERT		0x02
 #define SPI_CS_DROP		0x04
 
+#define SPI_TCR_TCNT_MAX	0x10000
+
 struct chip_data {
 	u32 mcr_val;
 	u32 ctar_val;
 	u16 void_write_data;
 };
 
+enum dspi_trans_mode {
+	DSPI_EOQ_MODE = 0,
+	DSPI_TCFQ_MODE,
+};
+
+struct fsl_dspi_devtype_data {
+	enum dspi_trans_mode trans_mode;
+};
+
+static const struct fsl_dspi_devtype_data vf610_data = {
+	.trans_mode = DSPI_EOQ_MODE,
+};
+
+static const struct fsl_dspi_devtype_data ls1021a_v1_data = {
+	.trans_mode = DSPI_TCFQ_MODE,
+};
+
+static const struct fsl_dspi_devtype_data ls2085a_data = {
+	.trans_mode = DSPI_TCFQ_MODE,
+};
+
 struct fsl_dspi {
 	struct spi_master	*master;
 	struct platform_device	*pdev;
@@ -128,9 +155,12 @@ struct fsl_dspi {
 	u8			cs;
 	u16			void_write_data;
 	u32			cs_change;
+	struct fsl_dspi_devtype_data *devtype_data;
 
 	wait_queue_head_t	waitq;
 	u32			waitflags;
+
+	u32			spi_tcnt;
 };
 
 static inline int is_double_byte_mode(struct fsl_dspi *dspi)
@@ -213,63 +243,60 @@ static void ns_delay_scale(char *psc, char *sc, int delay_ns,
 	}
 }
 
-static int dspi_transfer_write(struct fsl_dspi *dspi)
+static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word)
 {
-	int tx_count = 0;
-	int tx_word;
 	u16 d16;
-	u8  d8;
-	u32 dspi_pushr = 0;
-	int first = 1;
 
-	tx_word = is_double_byte_mode(dspi);
+	if (!(dspi->dataflags & TRAN_STATE_TX_VOID))
+		d16 = tx_word ? *(u16 *)dspi->tx : *(u8 *)dspi->tx;
+	else
+		d16 = dspi->void_write_data;
 
-	/* If we are in word mode, but only have a single byte to transfer
-	 * then switch to byte mode temporarily.  Will switch back at the
-	 * end of the transfer.
-	 */
-	if (tx_word && (dspi->len == 1)) {
-		dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
-		regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
-				SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
-		tx_word = 0;
-	}
+	dspi->tx += tx_word + 1;
+	dspi->len -= tx_word + 1;
 
-	while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
-		if (tx_word) {
-			if (dspi->len == 1)
-				break;
+	return	SPI_PUSHR_TXDATA(d16) |
+		SPI_PUSHR_PCS(dspi->cs) |
+		SPI_PUSHR_CTAS(dspi->cs) |
+		SPI_PUSHR_CONT;
+}
 
-			if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
-				d16 = *(u16 *)dspi->tx;
-				dspi->tx += 2;
-			} else {
-				d16 = dspi->void_write_data;
-			}
+static void dspi_data_from_popr(struct fsl_dspi *dspi, int rx_word)
+{
+	u16 d;
+	unsigned int val;
 
-			dspi_pushr = SPI_PUSHR_TXDATA(d16) |
-				SPI_PUSHR_PCS(dspi->cs) |
-				SPI_PUSHR_CTAS(dspi->cs) |
-				SPI_PUSHR_CONT;
+	regmap_read(dspi->regmap, SPI_POPR, &val);
+	d = SPI_POPR_RXDATA(val);
 
-			dspi->len -= 2;
-		} else {
-			if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) {
+	if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
+		rx_word ? (*(u16 *)dspi->rx = d) : (*(u8 *)dspi->rx = d);
 
-				d8 = *(u8 *)dspi->tx;
-				dspi->tx++;
-			} else {
-				d8 = (u8)dspi->void_write_data;
-			}
+	dspi->rx += rx_word + 1;
+}
 
-			dspi_pushr = SPI_PUSHR_TXDATA(d8) |
-				SPI_PUSHR_PCS(dspi->cs) |
-				SPI_PUSHR_CTAS(dspi->cs) |
-				SPI_PUSHR_CONT;
+static int dspi_eoq_write(struct fsl_dspi *dspi)
+{
+	int tx_count = 0;
+	int tx_word;
+	u32 dspi_pushr = 0;
+
+	tx_word = is_double_byte_mode(dspi);
 
-			dspi->len--;
+	while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
+		/* If we are in word mode, only have a single byte to transfer
+		 * switch to byte mode temporarily.  Will switch back at the
+		 * end of the transfer.
+		 */
+		if (tx_word && (dspi->len == 1)) {
+			dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
+			regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
+					SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
+			tx_word = 0;
 		}
 
+		dspi_pushr = dspi_data_to_pushr(dspi, tx_word);
+
 		if (dspi->len == 0 || tx_count == DSPI_FIFO_SIZE - 1) {
 			/* last transfer in the transfer */
 			dspi_pushr |= SPI_PUSHR_EOQ;
@@ -278,11 +305,6 @@ static int dspi_transfer_write(struct fsl_dspi *dspi)
 		} else if (tx_word && (dspi->len == 1))
 			dspi_pushr |= SPI_PUSHR_EOQ;
 
-		if (first) {
-			first = 0;
-			dspi_pushr |= SPI_PUSHR_CTCNT; /* clear counter */
-		}
-
 		regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
 
 		tx_count++;
@@ -291,40 +313,55 @@ static int dspi_transfer_write(struct fsl_dspi *dspi)
 	return tx_count * (tx_word + 1);
 }
 
-static int dspi_transfer_read(struct fsl_dspi *dspi)
+static int dspi_eoq_read(struct fsl_dspi *dspi)
 {
 	int rx_count = 0;
 	int rx_word = is_double_byte_mode(dspi);
-	u16 d;
 
 	while ((dspi->rx < dspi->rx_end)
 			&& (rx_count < DSPI_FIFO_SIZE)) {
-		if (rx_word) {
-			unsigned int val;
+		if (rx_word && (dspi->rx_end - dspi->rx) == 1)
+			rx_word = 0;
 
-			if ((dspi->rx_end - dspi->rx) == 1)
-				break;
+		dspi_data_from_popr(dspi, rx_word);
+		rx_count++;
+	}
 
-			regmap_read(dspi->regmap, SPI_POPR, &val);
-			d = SPI_POPR_RXDATA(val);
+	return rx_count;
+}
 
-			if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
-				*(u16 *)dspi->rx = d;
-			dspi->rx += 2;
+static int dspi_tcfq_write(struct fsl_dspi *dspi)
+{
+	int tx_word;
+	u32 dspi_pushr = 0;
 
-		} else {
-			unsigned int val;
+	tx_word = is_double_byte_mode(dspi);
 
-			regmap_read(dspi->regmap, SPI_POPR, &val);
-			d = SPI_POPR_RXDATA(val);
-			if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
-				*(u8 *)dspi->rx = d;
-			dspi->rx++;
-		}
-		rx_count++;
+	if (tx_word && (dspi->len == 1)) {
+		dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
+		regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
+				SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
+		tx_word = 0;
 	}
 
-	return rx_count;
+	dspi_pushr = dspi_data_to_pushr(dspi, tx_word);
+
+	if ((dspi->cs_change) && (!dspi->len))
+		dspi_pushr &= ~SPI_PUSHR_CONT;
+
+	regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
+
+	return tx_word + 1;
+}
+
+static void dspi_tcfq_read(struct fsl_dspi *dspi)
+{
+	int rx_word = is_double_byte_mode(dspi);
+
+	if (rx_word && (dspi->rx_end - dspi->rx) == 1)
+		rx_word = 0;
+
+	dspi_data_from_popr(dspi, rx_word);
 }
 
 static int dspi_transfer_one_message(struct spi_master *master,
@@ -334,6 +371,12 @@ static int dspi_transfer_one_message(struct spi_master *master,
 	struct spi_device *spi = message->spi;
 	struct spi_transfer *transfer;
 	int status = 0;
+	enum dspi_trans_mode trans_mode;
+	u32 spi_tcr;
+
+	regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
+	dspi->spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
+
 	message->actual_length = 0;
 
 	list_for_each_entry(transfer, &message->transfers, transfer_list) {
@@ -341,10 +384,10 @@ static int dspi_transfer_one_message(struct spi_master *master,
 		dspi->cur_msg = message;
 		dspi->cur_chip = spi_get_ctldata(spi);
 		dspi->cs = spi->chip_select;
+		dspi->cs_change = 0;
 		if (dspi->cur_transfer->transfer_list.next
 				== &dspi->cur_msg->transfers)
-			transfer->cs_change = 1;
-		dspi->cs_change = transfer->cs_change;
+			dspi->cs_change = 1;
 		dspi->void_write_data = dspi->cur_chip->void_write_data;
 
 		dspi->dataflags = 0;
@@ -370,8 +413,22 @@ static int dspi_transfer_one_message(struct spi_master *master,
 			regmap_write(dspi->regmap, SPI_CTAR(dspi->cs),
 					dspi->cur_chip->ctar_val);
 
-		regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
-		message->actual_length += dspi_transfer_write(dspi);
+		trans_mode = dspi->devtype_data->trans_mode;
+		switch (trans_mode) {
+		case DSPI_EOQ_MODE:
+			regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
+			dspi_eoq_write(dspi);
+			break;
+		case DSPI_TCFQ_MODE:
+			regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
+			dspi_tcfq_write(dspi);
+			break;
+		default:
+			dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
+				trans_mode);
+			status = -EINVAL;
+			goto out;
+		}
 
 		if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
 			dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
@@ -381,6 +438,7 @@ static int dspi_transfer_one_message(struct spi_master *master,
 			udelay(transfer->delay_usecs);
 	}
 
+out:
 	message->status = status;
 	spi_finalize_current_message(master);
 
@@ -460,27 +518,89 @@ static void dspi_cleanup(struct spi_device *spi)
 static irqreturn_t dspi_interrupt(int irq, void *dev_id)
 {
 	struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
-
 	struct spi_message *msg = dspi->cur_msg;
+	enum dspi_trans_mode trans_mode;
+	u32 spi_sr, spi_tcr;
+	u32 spi_tcnt, tcnt_diff;
+	int tx_word;
 
-	regmap_write(dspi->regmap, SPI_SR, SPI_SR_EOQF);
-	dspi_transfer_read(dspi);
-
-	if (!dspi->len) {
+	regmap_read(dspi->regmap, SPI_SR, &spi_sr);
+	regmap_write(dspi->regmap, SPI_SR, spi_sr);
+
+
+	if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)) {
+		tx_word = is_double_byte_mode(dspi);
+
+		regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
+		spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
+		/*
+		 * The width of SPI Transfer Counter in SPI_TCR is 16bits,
+		 * so the max couner is 65535. When the counter reach 65535,
+		 * it will wrap around, counter reset to zero.
+		 * spi_tcnt my be less than dspi->spi_tcnt, it means the
+		 * counter already wrapped around.
+		 * SPI Transfer Counter is a counter of transmitted frames.
+		 * The size of frame maybe two bytes.
+		 */
+		tcnt_diff = ((spi_tcnt + SPI_TCR_TCNT_MAX) - dspi->spi_tcnt)
+			% SPI_TCR_TCNT_MAX;
+		tcnt_diff *= (tx_word + 1);
 		if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM)
-			regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
-			SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(16));
+			tcnt_diff--;
+
+		msg->actual_length += tcnt_diff;
+
+		dspi->spi_tcnt = spi_tcnt;
+
+		trans_mode = dspi->devtype_data->trans_mode;
+		switch (trans_mode) {
+		case DSPI_EOQ_MODE:
+			dspi_eoq_read(dspi);
+			break;
+		case DSPI_TCFQ_MODE:
+			dspi_tcfq_read(dspi);
+			break;
+		default:
+			dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
+				trans_mode);
+				return IRQ_HANDLED;
+		}
 
-		dspi->waitflags = 1;
-		wake_up_interruptible(&dspi->waitq);
-	} else
-		msg->actual_length += dspi_transfer_write(dspi);
+		if (!dspi->len) {
+			if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM) {
+				regmap_update_bits(dspi->regmap,
+						   SPI_CTAR(dspi->cs),
+						   SPI_FRAME_BITS_MASK,
+						   SPI_FRAME_BITS(16));
+				dspi->dataflags &= ~TRAN_STATE_WORD_ODD_NUM;
+			}
+
+			dspi->waitflags = 1;
+			wake_up_interruptible(&dspi->waitq);
+		} else {
+			switch (trans_mode) {
+			case DSPI_EOQ_MODE:
+				dspi_eoq_write(dspi);
+				break;
+			case DSPI_TCFQ_MODE:
+				dspi_tcfq_write(dspi);
+				break;
+			default:
+				dev_err(&dspi->pdev->dev,
+					"unsupported trans_mode %u\n",
+					trans_mode);
+			}
+		}
+	}
 
 	return IRQ_HANDLED;
 }
 
 static const struct of_device_id fsl_dspi_dt_ids[] = {
-	{ .compatible = "fsl,vf610-dspi", .data = NULL, },
+	{ .compatible = "fsl,vf610-dspi", .data = (void *)&vf610_data, },
+	{ .compatible = "fsl,ls1021a-v1.0-dspi",
+		.data = (void *)&ls1021a_v1_data, },
+	{ .compatible = "fsl,ls2085a-dspi", .data = (void *)&ls2085a_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
@@ -494,6 +614,8 @@ static int dspi_suspend(struct device *dev)
 	spi_master_suspend(master);
 	clk_disable_unprepare(dspi->clk);
 
+	pinctrl_pm_select_sleep_state(dev);
+
 	return 0;
 }
 
@@ -502,6 +624,8 @@ static int dspi_resume(struct device *dev)
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct fsl_dspi *dspi = spi_master_get_devdata(master);
 
+	pinctrl_pm_select_default_state(dev);
+
 	clk_prepare_enable(dspi->clk);
 	spi_master_resume(master);
 
@@ -526,6 +650,8 @@ static int dspi_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *base;
 	int ret = 0, cs_num, bus_num;
+	const struct of_device_id *of_id =
+			of_match_device(fsl_dspi_dt_ids, &pdev->dev);
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
 	if (!master)
@@ -559,6 +685,13 @@ static int dspi_probe(struct platform_device *pdev)
 	}
 	master->bus_num = bus_num;
 
+	dspi->devtype_data = (struct fsl_dspi_devtype_data *)of_id->data;
+	if (!dspi->devtype_data) {
+		dev_err(&pdev->dev, "can't get devtype_data\n");
+		ret = -EFAULT;
+		goto out_master_put;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base)) {
@@ -566,7 +699,7 @@ static int dspi_probe(struct platform_device *pdev)
 		goto out_master_put;
 	}
 
-	dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base,
+	dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
 						&dspi_regmap_config);
 	if (IS_ERR(dspi->regmap)) {
 		dev_err(&pdev->dev, "failed to init regmap: %ld\n",

drivers/spi/spi-fsl-espi.c

@@ -561,9 +561,13 @@ void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
 
 		/* spin until TX is done */
 		ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg(
-				&reg_base->event)) & SPIE_NF) == 0, 1000, 0);
+				&reg_base->event)) & SPIE_NF), 1000, 0);
 		if (!ret) {
 			dev_err(mspi->dev, "tired waiting for SPIE_NF\n");
+
+			/* Clear the SPIE bits */
+			mpc8xxx_spi_write_reg(&reg_base->event, events);
+			complete(&mspi->done);
 			return;
 		}
 	}

drivers/spi/spi-imx.c

@@ -674,7 +674,7 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = {
 	.devtype = IMX51_ECSPI,
 };
 
-static struct platform_device_id spi_imx_devtype[] = {
+static const struct platform_device_id spi_imx_devtype[] = {
 	{
 		.name = "imx1-cspi",
 		.driver_data = (kernel_ulong_t) &imx1_cspi_devtype_data,

drivers/spi/spi-omap2-mcspi.c

@@ -35,6 +35,7 @@
 #include <linux/gcd.h>
 
 #include <linux/spi/spi.h>
+#include <linux/gpio.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -242,17 +243,27 @@ static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
 	mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0);
 }
 
-static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active)
+static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 {
 	u32 l;
 
-	l = mcspi_cached_chconf0(spi);
-	if (cs_active)
-		l |= OMAP2_MCSPI_CHCONF_FORCE;
-	else
-		l &= ~OMAP2_MCSPI_CHCONF_FORCE;
+	/* The controller handles the inverted chip selects
+	 * using the OMAP2_MCSPI_CHCONF_EPOL bit so revert
+	 * the inversion from the core spi_set_cs function.
+	 */
+	if (spi->mode & SPI_CS_HIGH)
+		enable = !enable;
 
-	mcspi_write_chconf0(spi, l);
+	if (spi->controller_state) {
+		l = mcspi_cached_chconf0(spi);
+
+		if (enable)
+			l &= ~OMAP2_MCSPI_CHCONF_FORCE;
+		else
+			l |= OMAP2_MCSPI_CHCONF_FORCE;
+
+		mcspi_write_chconf0(spi, l);
+	}
 }
 
 static void omap2_mcspi_set_master_mode(struct spi_master *master)
@@ -1011,6 +1022,15 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 			return ret;
 	}
 
+	if (gpio_is_valid(spi->cs_gpio)) {
+		ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
+		if (ret) {
+			dev_err(&spi->dev, "failed to request gpio\n");
+			return ret;
+		}
+		gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+	}
+
 	ret = pm_runtime_get_sync(mcspi->dev);
 	if (ret < 0)
 		return ret;
@@ -1050,9 +1070,13 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
 			mcspi_dma->dma_tx = NULL;
 		}
 	}
+
+	if (gpio_is_valid(spi->cs_gpio))
+		gpio_free(spi->cs_gpio);
 }
 
-static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
+static int omap2_mcspi_work_one(struct omap2_mcspi *mcspi,
+		struct spi_device *spi, struct spi_transfer *t)
 {
 
 	/* We only enable one channel at a time -- the one whose message is
@@ -1062,18 +1086,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 	 * chipselect with the FORCE bit ... CS != channel enable.
 	 */
 
-	struct spi_device		*spi;
-	struct spi_transfer		*t = NULL;
 	struct spi_master		*master;
 	struct omap2_mcspi_dma		*mcspi_dma;
-	int				cs_active = 0;
 	struct omap2_mcspi_cs		*cs;
 	struct omap2_mcspi_device_config *cd;
 	int				par_override = 0;
 	int				status = 0;
 	u32				chconf;
 
-	spi = m->spi;
 	master = spi->master;
 	mcspi_dma = mcspi->dma_channels + spi->chip_select;
 	cs = spi->controller_state;
@@ -1090,103 +1110,84 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 		par_override = 1;
 
 	omap2_mcspi_set_enable(spi, 0);
-	list_for_each_entry(t, &m->transfers, transfer_list) {
-		if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
-			status = -EINVAL;
-			break;
-		}
-		if (par_override ||
-		    (t->speed_hz != spi->max_speed_hz) ||
-		    (t->bits_per_word != spi->bits_per_word)) {
-			par_override = 1;
-			status = omap2_mcspi_setup_transfer(spi, t);
-			if (status < 0)
-				break;
-			if (t->speed_hz == spi->max_speed_hz &&
-			    t->bits_per_word == spi->bits_per_word)
-				par_override = 0;
-		}
-		if (cd && cd->cs_per_word) {
-			chconf = mcspi->ctx.modulctrl;
-			chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
-			mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
-			mcspi->ctx.modulctrl =
-				mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
-		}
 
+	if (gpio_is_valid(spi->cs_gpio))
+		omap2_mcspi_set_cs(spi, spi->mode & SPI_CS_HIGH);
 
-		if (!cs_active) {
-			omap2_mcspi_force_cs(spi, 1);
-			cs_active = 1;
-		}
-
-		chconf = mcspi_cached_chconf0(spi);
-		chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
-		chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
+	if (par_override ||
+	    (t->speed_hz != spi->max_speed_hz) ||
+	    (t->bits_per_word != spi->bits_per_word)) {
+		par_override = 1;
+		status = omap2_mcspi_setup_transfer(spi, t);
+		if (status < 0)
+			goto out;
+		if (t->speed_hz == spi->max_speed_hz &&
+		    t->bits_per_word == spi->bits_per_word)
+			par_override = 0;
+	}
+	if (cd && cd->cs_per_word) {
+		chconf = mcspi->ctx.modulctrl;
+		chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
+		mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+		mcspi->ctx.modulctrl =
+			mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+	}
 
-		if (t->tx_buf == NULL)
-			chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
-		else if (t->rx_buf == NULL)
-			chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
-
-		if (cd && cd->turbo_mode && t->tx_buf == NULL) {
-			/* Turbo mode is for more than one word */
-			if (t->len > ((cs->word_len + 7) >> 3))
-				chconf |= OMAP2_MCSPI_CHCONF_TURBO;
-		}
+	chconf = mcspi_cached_chconf0(spi);
+	chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
+	chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
+
+	if (t->tx_buf == NULL)
+		chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
+	else if (t->rx_buf == NULL)
+		chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
+
+	if (cd && cd->turbo_mode && t->tx_buf == NULL) {
+		/* Turbo mode is for more than one word */
+		if (t->len > ((cs->word_len + 7) >> 3))
+			chconf |= OMAP2_MCSPI_CHCONF_TURBO;
+	}
 
-		mcspi_write_chconf0(spi, chconf);
+	mcspi_write_chconf0(spi, chconf);
 
-		if (t->len) {
-			unsigned	count;
+	if (t->len) {
+		unsigned	count;
 
-			if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
-			    (m->is_dma_mapped || t->len >= DMA_MIN_BYTES))
-				omap2_mcspi_set_fifo(spi, t, 1);
+		if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
+		    (t->len >= DMA_MIN_BYTES))
+			omap2_mcspi_set_fifo(spi, t, 1);
 
-			omap2_mcspi_set_enable(spi, 1);
+		omap2_mcspi_set_enable(spi, 1);
 
-			/* RX_ONLY mode needs dummy data in TX reg */
-			if (t->tx_buf == NULL)
-				writel_relaxed(0, cs->base
-						+ OMAP2_MCSPI_TX0);
+		/* RX_ONLY mode needs dummy data in TX reg */
+		if (t->tx_buf == NULL)
+			writel_relaxed(0, cs->base
+					+ OMAP2_MCSPI_TX0);
 
-			if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
-			    (m->is_dma_mapped || t->len >= DMA_MIN_BYTES))
-				count = omap2_mcspi_txrx_dma(spi, t);
-			else
-				count = omap2_mcspi_txrx_pio(spi, t);
-			m->actual_length += count;
+		if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
+		    (t->len >= DMA_MIN_BYTES))
+			count = omap2_mcspi_txrx_dma(spi, t);
+		else
+			count = omap2_mcspi_txrx_pio(spi, t);
 
-			if (count != t->len) {
-				status = -EIO;
-				break;
-			}
+		if (count != t->len) {
+			status = -EIO;
+			goto out;
 		}
+	}
 
-		if (t->delay_usecs)
-			udelay(t->delay_usecs);
-
-		/* ignore the "leave it on after last xfer" hint */
-		if (t->cs_change) {
-			omap2_mcspi_force_cs(spi, 0);
-			cs_active = 0;
-		}
+	omap2_mcspi_set_enable(spi, 0);
 
-		omap2_mcspi_set_enable(spi, 0);
+	if (mcspi->fifo_depth > 0)
+		omap2_mcspi_set_fifo(spi, t, 0);
 
-		if (mcspi->fifo_depth > 0)
-			omap2_mcspi_set_fifo(spi, t, 0);
-	}
+out:
 	/* Restore defaults if they were overriden */
 	if (par_override) {
 		par_override = 0;
 		status = omap2_mcspi_setup_transfer(spi, NULL);
 	}
 
-	if (cs_active)
-		omap2_mcspi_force_cs(spi, 0);
-
 	if (cd && cd->cs_per_word) {
 		chconf = mcspi->ctx.modulctrl;
 		chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
@@ -1197,78 +1198,64 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 
 	omap2_mcspi_set_enable(spi, 0);
 
+	if (gpio_is_valid(spi->cs_gpio))
+		omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
+
 	if (mcspi->fifo_depth > 0 && t)
 		omap2_mcspi_set_fifo(spi, t, 0);
 
-	m->status = status;
+	return status;
 }
 
-static int omap2_mcspi_transfer_one_message(struct spi_master *master,
-		struct spi_message *m)
+static int omap2_mcspi_transfer_one(struct spi_master *master,
+		struct spi_device *spi, struct spi_transfer *t)
 {
-	struct spi_device	*spi;
 	struct omap2_mcspi	*mcspi;
 	struct omap2_mcspi_dma	*mcspi_dma;
-	struct spi_transfer	*t;
-	int status;
+	const void	*tx_buf = t->tx_buf;
+	void		*rx_buf = t->rx_buf;
+	unsigned	len = t->len;
 
-	spi = m->spi;
 	mcspi = spi_master_get_devdata(master);
 	mcspi_dma = mcspi->dma_channels + spi->chip_select;
-	m->actual_length = 0;
-	m->status = 0;
-
-	list_for_each_entry(t, &m->transfers, transfer_list) {
-		const void	*tx_buf = t->tx_buf;
-		void		*rx_buf = t->rx_buf;
-		unsigned	len = t->len;
-
-		if ((len && !(rx_buf || tx_buf))) {
-			dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
-					t->speed_hz,
-					len,
-					tx_buf ? "tx" : "",
-					rx_buf ? "rx" : "",
-					t->bits_per_word);
-			status = -EINVAL;
-			goto out;
-		}
 
-		if (m->is_dma_mapped || len < DMA_MIN_BYTES)
-			continue;
-
-		if (mcspi_dma->dma_tx && tx_buf != NULL) {
-			t->tx_dma = dma_map_single(mcspi->dev, (void *) tx_buf,
-					len, DMA_TO_DEVICE);
-			if (dma_mapping_error(mcspi->dev, t->tx_dma)) {
-				dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
-						'T', len);
-				status = -EINVAL;
-				goto out;
-			}
+	if ((len && !(rx_buf || tx_buf))) {
+		dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
+				t->speed_hz,
+				len,
+				tx_buf ? "tx" : "",
+				rx_buf ? "rx" : "",
+				t->bits_per_word);
+		return -EINVAL;
+	}
+
+	if (len < DMA_MIN_BYTES)
+		goto skip_dma_map;
+
+	if (mcspi_dma->dma_tx && tx_buf != NULL) {
+		t->tx_dma = dma_map_single(mcspi->dev, (void *) tx_buf,
+				len, DMA_TO_DEVICE);
+		if (dma_mapping_error(mcspi->dev, t->tx_dma)) {
+			dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
+					'T', len);
+			return -EINVAL;
 		}
-		if (mcspi_dma->dma_rx && rx_buf != NULL) {
-			t->rx_dma = dma_map_single(mcspi->dev, rx_buf, t->len,
-					DMA_FROM_DEVICE);
-			if (dma_mapping_error(mcspi->dev, t->rx_dma)) {
-				dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
-						'R', len);
-				if (tx_buf != NULL)
-					dma_unmap_single(mcspi->dev, t->tx_dma,
-							len, DMA_TO_DEVICE);
-				status = -EINVAL;
-				goto out;
-			}
+	}
+	if (mcspi_dma->dma_rx && rx_buf != NULL) {
+		t->rx_dma = dma_map_single(mcspi->dev, rx_buf, t->len,
+				DMA_FROM_DEVICE);
+		if (dma_mapping_error(mcspi->dev, t->rx_dma)) {
+			dev_dbg(mcspi->dev, "dma %cX %d bytes error\n",
+					'R', len);
+			if (tx_buf != NULL)
+				dma_unmap_single(mcspi->dev, t->tx_dma,
+						len, DMA_TO_DEVICE);
+			return -EINVAL;
 		}
 	}
 
-	omap2_mcspi_work(mcspi, m);
-	/* spi_finalize_current_message() changes the status inside the
-	 * spi_message, save the status here. */
-	status = m->status;
-out:
-	spi_finalize_current_message(master);
-	return status;
+skip_dma_map:
+	return omap2_mcspi_work_one(mcspi, spi, t);
 }
 
 static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
@@ -1347,7 +1334,8 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
 	master->setup = omap2_mcspi_setup;
 	master->auto_runtime_pm = true;
-	master->transfer_one_message = omap2_mcspi_transfer_one_message;
+	master->transfer_one = omap2_mcspi_transfer_one;
+	master->set_cs = omap2_mcspi_set_cs;
 	master->cleanup = omap2_mcspi_cleanup;
 	master->dev.of_node = node;
 	master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;

drivers/spi/spi-orion.c

@@ -61,6 +61,12 @@ enum orion_spi_type {
 
 struct orion_spi_dev {
 	enum orion_spi_type	typ;
+	/*
+	 * min_divisor and max_hz should be exclusive, the only we can
+	 * have both is for managing the armada-370-spi case with old
+	 * device tree
+	 */
+	unsigned long		max_hz;
 	unsigned int		min_divisor;
 	unsigned int		max_divisor;
 	u32			prescale_mask;
@@ -385,16 +391,54 @@ static const struct orion_spi_dev orion_spi_dev_data = {
 	.prescale_mask = ORION_SPI_CLK_PRESCALE_MASK,
 };
 
-static const struct orion_spi_dev armada_spi_dev_data = {
+static const struct orion_spi_dev armada_370_spi_dev_data = {
 	.typ = ARMADA_SPI,
-	.min_divisor = 1,
+	.min_divisor = 4,
+	.max_divisor = 1920,
+	.max_hz = 50000000,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_xp_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.max_hz = 50000000,
+	.max_divisor = 1920,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+};
+
+static const struct orion_spi_dev armada_375_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.min_divisor = 15,
 	.max_divisor = 1920,
 	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
 };
 
 static const struct of_device_id orion_spi_of_match_table[] = {
-	{ .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, },
-	{ .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, },
+	{
+		.compatible = "marvell,orion-spi",
+		.data = &orion_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-370-spi",
+		.data = &armada_370_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-375-spi",
+		.data = &armada_375_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-380-spi",
+		.data = &armada_xp_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-390-spi",
+		.data = &armada_xp_spi_dev_data,
+	},
+	{
+		.compatible = "marvell,armada-xp-spi",
+		.data = &armada_xp_spi_dev_data,
+	},
+
 	{}
 };
 MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
@@ -454,7 +498,23 @@ static int orion_spi_probe(struct platform_device *pdev)
 		goto out;
 
 	tclk_hz = clk_get_rate(spi->clk);
-	master->max_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
+
+	/*
+	 * With old device tree, armada-370-spi could be used with
+	 * Armada XP, however for this SoC the maximum frequency is
+	 * 50MHz instead of tclk/4. On Armada 370, tclk cannot be
+	 * higher than 200MHz. So, in order to be able to handle both
+	 * SoCs, we can take the minimum of 50MHz and tclk/4.
+	 */
+	if (of_device_is_compatible(pdev->dev.of_node,
+					"marvell,armada-370-spi"))
+		master->max_speed_hz = min(devdata->max_hz,
+				DIV_ROUND_UP(tclk_hz, devdata->min_divisor));
+	else if (devdata->min_divisor)
+		master->max_speed_hz =
+			DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
+	else
+		master->max_speed_hz = devdata->max_hz;
 	master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);

drivers/spi/spi-pxa2xx-pci.c

@@ -62,7 +62,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.max_clk_rate = 3686400,
 	},
 	[PORT_BYT] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -70,7 +70,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &byt_rx_param,
 	},
 	[PORT_BSW0] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -78,7 +78,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &bsw0_rx_param,
 	},
 	[PORT_BSW1] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 1,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,
@@ -86,7 +86,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.rx_param = &bsw1_rx_param,
 	},
 	[PORT_BSW2] = {
-		.type = LPSS_SSP,
+		.type = LPSS_BYT_SSP,
 		.port_id = 2,
 		.num_chipselect = 1,
 		.max_clk_rate = 50000000,

drivers/spi/spi-pxa2xx-pxadma.c

@@ -1,487 +0,0 @@
-/*
- * PXA2xx SPI private DMA support.
- *
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/pxa2xx_ssp.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <mach/dma.h>
-#include "spi-pxa2xx.h"
-
-#define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
-
-bool pxa2xx_spi_dma_is_possible(size_t len)
-{
-	/* Try to map dma buffer and do a dma transfer if successful, but
-	 * only if the length is non-zero and less than MAX_DMA_LEN.
-	 *
-	 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
-	 * of PIO instead.  Care is needed above because the transfer may
-	 * have have been passed with buffers that are already dma mapped.
-	 * A zero-length transfer in PIO mode will not try to write/read
-	 * to/from the buffers
-	 *
-	 * REVISIT large transfers are exactly where we most want to be
-	 * using DMA.  If this happens much, split those transfers into
-	 * multiple DMA segments rather than forcing PIO.
-	 */
-	return len > 0 && len <= MAX_DMA_LEN;
-}
-
-int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-	struct device *dev = &msg->spi->dev;
-
-	if (!drv_data->cur_chip->enable_dma)
-		return 0;
-
-	if (msg->is_dma_mapped)
-		return  drv_data->rx_dma && drv_data->tx_dma;
-
-	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
-		return 0;
-
-	/* Modify setup if rx buffer is null */
-	if (drv_data->rx == NULL) {
-		*drv_data->null_dma_buf = 0;
-		drv_data->rx = drv_data->null_dma_buf;
-		drv_data->rx_map_len = 4;
-	} else
-		drv_data->rx_map_len = drv_data->len;
-
-
-	/* Modify setup if tx buffer is null */
-	if (drv_data->tx == NULL) {
-		*drv_data->null_dma_buf = 0;
-		drv_data->tx = drv_data->null_dma_buf;
-		drv_data->tx_map_len = 4;
-	} else
-		drv_data->tx_map_len = drv_data->len;
-
-	/* Stream map the tx buffer. Always do DMA_TO_DEVICE first
-	 * so we flush the cache *before* invalidating it, in case
-	 * the tx and rx buffers overlap.
-	 */
-	drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
-					drv_data->tx_map_len, DMA_TO_DEVICE);
-	if (dma_mapping_error(dev, drv_data->tx_dma))
-		return 0;
-
-	/* Stream map the rx buffer */
-	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
-					drv_data->rx_map_len, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dev, drv_data->rx_dma)) {
-		dma_unmap_single(dev, drv_data->tx_dma,
-					drv_data->tx_map_len, DMA_TO_DEVICE);
-		return 0;
-	}
-
-	return 1;
-}
-
-static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
-{
-	struct device *dev;
-
-	if (!drv_data->dma_mapped)
-		return;
-
-	if (!drv_data->cur_msg->is_dma_mapped) {
-		dev = &drv_data->cur_msg->spi->dev;
-		dma_unmap_single(dev, drv_data->rx_dma,
-					drv_data->rx_map_len, DMA_FROM_DEVICE);
-		dma_unmap_single(dev, drv_data->tx_dma,
-					drv_data->tx_map_len, DMA_TO_DEVICE);
-	}
-
-	drv_data->dma_mapped = 0;
-}
-
-static int wait_ssp_rx_stall(struct driver_data *drv_data)
-{
-	unsigned long limit = loops_per_jiffy << 1;
-
-	while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit)
-		cpu_relax();
-
-	return limit;
-}
-
-static int wait_dma_channel_stop(int channel)
-{
-	unsigned long limit = loops_per_jiffy << 1;
-
-	while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
-		cpu_relax();
-
-	return limit;
-}
-
-static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data,
-				      const char *msg)
-{
-	/* Stop and reset */
-	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
-	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
-	write_SSSR_CS(drv_data, drv_data->clear_sr);
-	pxa2xx_spi_write(drv_data, SSCR1,
-			 pxa2xx_spi_read(drv_data, SSCR1)
-			 & ~drv_data->dma_cr1);
-	if (!pxa25x_ssp_comp(drv_data))
-		pxa2xx_spi_write(drv_data, SSTO, 0);
-	pxa2xx_spi_flush(drv_data);
-	pxa2xx_spi_write(drv_data, SSCR0,
-			 pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
-
-	pxa2xx_spi_unmap_dma_buffers(drv_data);
-
-	dev_err(&drv_data->pdev->dev, "%s\n", msg);
-
-	drv_data->cur_msg->state = ERROR_STATE;
-	tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data)
-{
-	struct spi_message *msg = drv_data->cur_msg;
-
-	/* Clear and disable interrupts on SSP and DMA channels*/
-	pxa2xx_spi_write(drv_data, SSCR1,
-			 pxa2xx_spi_read(drv_data, SSCR1)
-			 & ~drv_data->dma_cr1);
-	write_SSSR_CS(drv_data, drv_data->clear_sr);
-	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
-	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
-
-	if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
-		dev_err(&drv_data->pdev->dev,
-			"dma_handler: dma rx channel stop failed\n");
-
-	if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
-		dev_err(&drv_data->pdev->dev,
-			"dma_transfer: ssp rx stall failed\n");
-
-	pxa2xx_spi_unmap_dma_buffers(drv_data);
-
-	/* update the buffer pointer for the amount completed in dma */
-	drv_data->rx += drv_data->len -
-			(DCMD(drv_data->rx_channel) & DCMD_LENGTH);
-
-	/* read trailing data from fifo, it does not matter how many
-	 * bytes are in the fifo just read until buffer is full
-	 * or fifo is empty, which ever occurs first */
-	drv_data->read(drv_data);
-
-	/* return count of what was actually read */
-	msg->actual_length += drv_data->len -
-				(drv_data->rx_end - drv_data->rx);
-
-	/* Transfer delays and chip select release are
-	 * handled in pump_transfers or giveback
-	 */
-
-	/* Move to next transfer */
-	msg->state = pxa2xx_spi_next_transfer(drv_data);
-
-	/* Schedule transfer tasklet */
-	tasklet_schedule(&drv_data->pump_transfers);
-}
-
-void pxa2xx_spi_dma_handler(int channel, void *data)
-{
-	struct driver_data *drv_data = data;
-	u32 irq_status = DCSR(channel) & DMA_INT_MASK;
-
-	if (irq_status & DCSR_BUSERR) {
-
-		if (channel == drv_data->tx_channel)
-			pxa2xx_spi_dma_error_stop(drv_data,
-				"dma_handler: bad bus address on tx channel");
-		else
-			pxa2xx_spi_dma_error_stop(drv_data,
-				"dma_handler: bad bus address on rx channel");
-		return;
-	}
-
-	/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
-	if ((channel == drv_data->tx_channel)
-		&& (irq_status & DCSR_ENDINTR)
-		&& (drv_data->ssp_type == PXA25x_SSP)) {
-
-		/* Wait for rx to stall */
-		if (wait_ssp_rx_stall(drv_data) == 0)
-			dev_err(&drv_data->pdev->dev,
-				"dma_handler: ssp rx stall failed\n");
-
-		/* finish this transfer, start the next */
-		pxa2xx_spi_dma_transfer_complete(drv_data);
-	}
-}
-
-irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
-{
-	u32 irq_status;
-
-	irq_status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
-	if (irq_status & SSSR_ROR) {
-		pxa2xx_spi_dma_error_stop(drv_data,
-					  "dma_transfer: fifo overrun");
-		return IRQ_HANDLED;
-	}
-
-	/* Check for false positive timeout */
-	if ((irq_status & SSSR_TINT)
-		&& (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
-		pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
-		return IRQ_HANDLED;
-	}
-
-	if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
-
-		/* Clear and disable timeout interrupt, do the rest in
-		 * dma_transfer_complete */
-		if (!pxa25x_ssp_comp(drv_data))
-			pxa2xx_spi_write(drv_data, SSTO, 0);
-
-		/* finish this transfer, start the next */
-		pxa2xx_spi_dma_transfer_complete(drv_data);
-
-		return IRQ_HANDLED;
-	}
-
-	/* Opps problem detected */
-	return IRQ_NONE;
-}
-
-int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
-{
-	u32 dma_width;
-
-	switch (drv_data->n_bytes) {
-	case 1:
-		dma_width = DCMD_WIDTH1;
-		break;
-	case 2:
-		dma_width = DCMD_WIDTH2;
-		break;
-	default:
-		dma_width = DCMD_WIDTH4;
-		break;
-	}
-
-	/* Setup rx DMA Channel */
-	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
-	DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
-	DTADR(drv_data->rx_channel) = drv_data->rx_dma;
-	if (drv_data->rx == drv_data->null_dma_buf)
-		/* No target address increment */
-		DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
-						| dma_width
-						| dma_burst
-						| drv_data->len;
-	else
-		DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
-						| DCMD_FLOWSRC
-						| dma_width
-						| dma_burst
-						| drv_data->len;
-
-	/* Setup tx DMA Channel */
-	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
-	DSADR(drv_data->tx_channel) = drv_data->tx_dma;
-	DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
-	if (drv_data->tx == drv_data->null_dma_buf)
-		/* No source address increment */
-		DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
-						| dma_width
-						| dma_burst
-						| drv_data->len;
-	else
-		DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
-						| DCMD_FLOWTRG
-						| dma_width
-						| dma_burst
-						| drv_data->len;
-
-	/* Enable dma end irqs on SSP to detect end of transfer */
-	if (drv_data->ssp_type == PXA25x_SSP)
-		DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
-
-	return 0;
-}
-
-void pxa2xx_spi_dma_start(struct driver_data *drv_data)
-{
-	DCSR(drv_data->rx_channel) |= DCSR_RUN;
-	DCSR(drv_data->tx_channel) |= DCSR_RUN;
-}
-
-int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
-{
-	struct device *dev = &drv_data->pdev->dev;
-	struct ssp_device *ssp = drv_data->ssp;
-
-	/* Get two DMA channels	(rx and tx) */
-	drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
-						DMA_PRIO_HIGH,
-						pxa2xx_spi_dma_handler,
-						drv_data);
-	if (drv_data->rx_channel < 0) {
-		dev_err(dev, "problem (%d) requesting rx channel\n",
-			drv_data->rx_channel);
-		return -ENODEV;
-	}
-	drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
-						DMA_PRIO_MEDIUM,
-						pxa2xx_spi_dma_handler,
-						drv_data);
-	if (drv_data->tx_channel < 0) {
-		dev_err(dev, "problem (%d) requesting tx channel\n",
-			drv_data->tx_channel);
-		pxa_free_dma(drv_data->rx_channel);
-		return -ENODEV;
-	}
-
-	DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
-	DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
-
-	return 0;
-}
-
-void pxa2xx_spi_dma_release(struct driver_data *drv_data)
-{
-	struct ssp_device *ssp = drv_data->ssp;
-
-	DRCMR(ssp->drcmr_rx) = 0;
-	DRCMR(ssp->drcmr_tx) = 0;
-
-	if (drv_data->tx_channel != 0)
-		pxa_free_dma(drv_data->tx_channel);
-	if (drv_data->rx_channel != 0)
-		pxa_free_dma(drv_data->rx_channel);
-}
-
-void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
-{
-	if (drv_data->rx_channel != -1)
-		DRCMR(drv_data->ssp->drcmr_rx) =
-			DRCMR_MAPVLD | drv_data->rx_channel;
-	if (drv_data->tx_channel != -1)
-		DRCMR(drv_data->ssp->drcmr_tx) =
-			DRCMR_MAPVLD | drv_data->tx_channel;
-}
-
-int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
-					   struct spi_device *spi,
-					   u8 bits_per_word, u32 *burst_code,
-					   u32 *threshold)
-{
-	struct pxa2xx_spi_chip *chip_info =
-			(struct pxa2xx_spi_chip *)spi->controller_data;
-	int bytes_per_word;
-	int burst_bytes;
-	int thresh_words;
-	int req_burst_size;
-	int retval = 0;
-
-	/* Set the threshold (in registers) to equal the same amount of data
-	 * as represented by burst size (in bytes).  The computation below
-	 * is (burst_size rounded up to nearest 8 byte, word or long word)
-	 * divided by (bytes/register); the tx threshold is the inverse of
-	 * the rx, so that there will always be enough data in the rx fifo
-	 * to satisfy a burst, and there will always be enough space in the
-	 * tx fifo to accept a burst (a tx burst will overwrite the fifo if
-	 * there is not enough space), there must always remain enough empty
-	 * space in the rx fifo for any data loaded to the tx fifo.
-	 * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
-	 * will be 8, or half the fifo;
-	 * The threshold can only be set to 2, 4 or 8, but not 16, because
-	 * to burst 16 to the tx fifo, the fifo would have to be empty;
-	 * however, the minimum fifo trigger level is 1, and the tx will
-	 * request service when the fifo is at this level, with only 15 spaces.
-	 */
-
-	/* find bytes/word */
-	if (bits_per_word <= 8)
-		bytes_per_word = 1;
-	else if (bits_per_word <= 16)
-		bytes_per_word = 2;
-	else
-		bytes_per_word = 4;
-
-	/* use struct pxa2xx_spi_chip->dma_burst_size if available */
-	if (chip_info)
-		req_burst_size = chip_info->dma_burst_size;
-	else {
-		switch (chip->dma_burst_size) {
-		default:
-			/* if the default burst size is not set,
-			 * do it now */
-			chip->dma_burst_size = DCMD_BURST8;
-		case DCMD_BURST8:
-			req_burst_size = 8;
-			break;
-		case DCMD_BURST16:
-			req_burst_size = 16;
-			break;
-		case DCMD_BURST32:
-			req_burst_size = 32;
-			break;
-		}
-	}
-	if (req_burst_size <= 8) {
-		*burst_code = DCMD_BURST8;
-		burst_bytes = 8;
-	} else if (req_burst_size <= 16) {
-		if (bytes_per_word == 1) {
-			/* don't burst more than 1/2 the fifo */
-			*burst_code = DCMD_BURST8;
-			burst_bytes = 8;
-			retval = 1;
-		} else {
-			*burst_code = DCMD_BURST16;
-			burst_bytes = 16;
-		}
-	} else {
-		if (bytes_per_word == 1) {
-			/* don't burst more than 1/2 the fifo */
-			*burst_code = DCMD_BURST8;
-			burst_bytes = 8;
-			retval = 1;
-		} else if (bytes_per_word == 2) {
-			/* don't burst more than 1/2 the fifo */
-			*burst_code = DCMD_BURST16;
-			burst_bytes = 16;
-			retval = 1;
-		} else {
-			*burst_code = DCMD_BURST32;
-			burst_bytes = 32;
-		}
-	}
-
-	thresh_words = burst_bytes / bytes_per_word;
-
-	/* thresh_words will be between 2 and 8 */
-	*threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
-			| (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
-
-	return retval;
-}

drivers/spi/spi-pxa2xx.c

@@ -60,21 +60,60 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 				| QUARK_X1000_SSCR1_TFT		\
 				| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
 
-#define LPSS_RX_THRESH_DFLT	64
-#define LPSS_TX_LOTHRESH_DFLT	160
-#define LPSS_TX_HITHRESH_DFLT	224
-
-/* Offset from drv_data->lpss_base */
-#define GENERAL_REG		0x08
 #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
-#define SSP_REG			0x0c
-#define SPI_CS_CONTROL		0x18
 #define SPI_CS_CONTROL_SW_MODE	BIT(0)
 #define SPI_CS_CONTROL_CS_HIGH	BIT(1)
 
+struct lpss_config {
+	/* LPSS offset from drv_data->ioaddr */
+	unsigned offset;
+	/* Register offsets from drv_data->lpss_base or -1 */
+	int reg_general;
+	int reg_ssp;
+	int reg_cs_ctrl;
+	/* FIFO thresholds */
+	u32 rx_threshold;
+	u32 tx_threshold_lo;
+	u32 tx_threshold_hi;
+};
+
+/* Keep these sorted with enum pxa_ssp_type */
+static const struct lpss_config lpss_platforms[] = {
+	{	/* LPSS_LPT_SSP */
+		.offset = 0x800,
+		.reg_general = 0x08,
+		.reg_ssp = 0x0c,
+		.reg_cs_ctrl = 0x18,
+		.rx_threshold = 64,
+		.tx_threshold_lo = 160,
+		.tx_threshold_hi = 224,
+	},
+	{	/* LPSS_BYT_SSP */
+		.offset = 0x400,
+		.reg_general = 0x08,
+		.reg_ssp = 0x0c,
+		.reg_cs_ctrl = 0x18,
+		.rx_threshold = 64,
+		.tx_threshold_lo = 160,
+		.tx_threshold_hi = 224,
+	},
+};
+
+static inline const struct lpss_config
+*lpss_get_config(const struct driver_data *drv_data)
+{
+	return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
+}
+
 static bool is_lpss_ssp(const struct driver_data *drv_data)
 {
-	return drv_data->ssp_type == LPSS_SSP;
+	switch (drv_data->ssp_type) {
+	case LPSS_LPT_SSP:
+	case LPSS_BYT_SSP:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
@@ -192,63 +231,43 @@ static void __lpss_ssp_write_priv(struct driver_data *drv_data,
  */
 static void lpss_ssp_setup(struct driver_data *drv_data)
 {
-	unsigned offset = 0x400;
-	u32 value, orig;
-
-	/*
-	 * Perform auto-detection of the LPSS SSP private registers. They
-	 * can be either at 1k or 2k offset from the base address.
-	 */
-	orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-
-	/* Test SPI_CS_CONTROL_SW_MODE bit enabling */
-	value = orig | SPI_CS_CONTROL_SW_MODE;
-	writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	if (value != (orig | SPI_CS_CONTROL_SW_MODE)) {
-		offset = 0x800;
-		goto detection_done;
-	}
-
-	orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-
-	/* Test SPI_CS_CONTROL_SW_MODE bit disabling */
-	value = orig & ~SPI_CS_CONTROL_SW_MODE;
-	writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
-	if (value != (orig & ~SPI_CS_CONTROL_SW_MODE)) {
-		offset = 0x800;
-		goto detection_done;
-	}
+	const struct lpss_config *config;
+	u32 value;
 
-detection_done:
-	/* Now set the LPSS base */
-	drv_data->lpss_base = drv_data->ioaddr + offset;
+	config = lpss_get_config(drv_data);
+	drv_data->lpss_base = drv_data->ioaddr + config->offset;
 
 	/* Enable software chip select control */
 	value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
-	__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+	__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 
 	/* Enable multiblock DMA transfers */
 	if (drv_data->master_info->enable_dma) {
-		__lpss_ssp_write_priv(drv_data, SSP_REG, 1);
-
-		value = __lpss_ssp_read_priv(drv_data, GENERAL_REG);
-		value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
-		__lpss_ssp_write_priv(drv_data, GENERAL_REG, value);
+		__lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
+
+		if (config->reg_general >= 0) {
+			value = __lpss_ssp_read_priv(drv_data,
+						     config->reg_general);
+			value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
+			__lpss_ssp_write_priv(drv_data,
+					      config->reg_general, value);
+		}
 	}
 }
 
 static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
 {
+	const struct lpss_config *config;
 	u32 value;
 
-	value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL);
+	config = lpss_get_config(drv_data);
+
+	value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
 	if (enable)
 		value &= ~SPI_CS_CONTROL_CS_HIGH;
 	else
 		value |= SPI_CS_CONTROL_CS_HIGH;
-	__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
+	__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
 }
 
 static void cs_assert(struct driver_data *drv_data)
@@ -1075,6 +1094,7 @@ static int setup(struct spi_device *spi)
 {
 	struct pxa2xx_spi_chip *chip_info = NULL;
 	struct chip_data *chip;
+	const struct lpss_config *config;
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 	unsigned int clk_div;
 	uint tx_thres, tx_hi_thres, rx_thres;
@@ -1085,10 +1105,12 @@ static int setup(struct spi_device *spi)
 		tx_hi_thres = 0;
 		rx_thres = RX_THRESH_QUARK_X1000_DFLT;
 		break;
-	case LPSS_SSP:
-		tx_thres = LPSS_TX_LOTHRESH_DFLT;
-		tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
-		rx_thres = LPSS_RX_THRESH_DFLT;
+	case LPSS_LPT_SSP:
+	case LPSS_BYT_SSP:
+		config = lpss_get_config(drv_data);
+		tx_thres = config->tx_threshold_lo;
+		tx_hi_thres = config->tx_threshold_hi;
+		rx_thres = config->rx_threshold;
 		break;
 	default:
 		tx_thres = TX_THRESH_DFLT;
@@ -1242,6 +1264,18 @@ static void cleanup(struct spi_device *spi)
 }
 
 #ifdef CONFIG_ACPI
+
+static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
+	{ "INT33C0", LPSS_LPT_SSP },
+	{ "INT33C1", LPSS_LPT_SSP },
+	{ "INT3430", LPSS_LPT_SSP },
+	{ "INT3431", LPSS_LPT_SSP },
+	{ "80860F0E", LPSS_BYT_SSP },
+	{ "8086228E", LPSS_BYT_SSP },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
+
 static struct pxa2xx_spi_master *
 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 {
@@ -1249,12 +1283,19 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	struct acpi_device *adev;
 	struct ssp_device *ssp;
 	struct resource *res;
-	int devid;
+	const struct acpi_device_id *id;
+	int devid, type;
 
 	if (!ACPI_HANDLE(&pdev->dev) ||
 	    acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
 		return NULL;
 
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id)
+		type = (int)id->driver_data;
+	else
+		return NULL;
+
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
@@ -1272,7 +1313,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 
 	ssp->clk = devm_clk_get(&pdev->dev, NULL);
 	ssp->irq = platform_get_irq(pdev, 0);
-	ssp->type = LPSS_SSP;
+	ssp->type = type;
 	ssp->pdev = pdev;
 
 	ssp->port_id = -1;
@@ -1285,16 +1326,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 	return pdata;
 }
 
-static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
-	{ "INT33C0", 0 },
-	{ "INT33C1", 0 },
-	{ "INT3430", 0 },
-	{ "INT3431", 0 },
-	{ "80860F0E", 0 },
-	{ "8086228E", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
 #else
 static inline struct pxa2xx_spi_master *
 pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)

drivers/spi/spi-pxa2xx.h

@@ -162,11 +162,7 @@ extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
 /*
  * Select the right DMA implementation.
  */
-#if defined(CONFIG_SPI_PXA2XX_PXADMA)
-#define SPI_PXA2XX_USE_DMA	1
-#define MAX_DMA_LEN		8191
-#define DEFAULT_DMA_CR1		(SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE)
-#elif defined(CONFIG_SPI_PXA2XX_DMA)
+#if defined(CONFIG_SPI_PXA2XX_DMA)
 #define SPI_PXA2XX_USE_DMA	1
 #define MAX_DMA_LEN		SZ_64K
 #define DEFAULT_DMA_CR1		(SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)

drivers/spi/spi-rb4xx.c

@@ -0,0 +1,210 @@
+/*
+ * SPI controller driver for the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+struct rb4xx_spi {
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline u32 rb4xx_read(struct rb4xx_spi *rbspi, u32 reg)
+{
+	return __raw_readl(rbspi->base + reg);
+}
+
+static inline void rb4xx_write(struct rb4xx_spi *rbspi, u32 reg, u32 value)
+{
+	__raw_writel(value, rbspi->base + reg);
+}
+
+static inline void do_spi_clk(struct rb4xx_spi *rbspi, u32 spi_ioc, int value)
+{
+	u32 regval;
+
+	regval = spi_ioc;
+	if (value & BIT(0))
+		regval |= AR71XX_SPI_IOC_DO;
+
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+static void do_spi_byte(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+	int i;
+
+	for (i = 7; i >= 0; i--)
+		do_spi_clk(rbspi, spi_ioc, byte >> i);
+}
+
+/* The CS2 pin is used to clock in a second bit per clock cycle. */
+static inline void do_spi_clk_two(struct rb4xx_spi *rbspi, u32 spi_ioc,
+				   u8 value)
+{
+	u32 regval;
+
+	regval = spi_ioc;
+	if (value & BIT(1))
+		regval |= AR71XX_SPI_IOC_DO;
+	if (value & BIT(0))
+		regval |= AR71XX_SPI_IOC_CS2;
+
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
+	rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
+}
+
+/* Two bits at a time, msb first */
+static void do_spi_byte_two(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
+{
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 6);
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 4);
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 2);
+	do_spi_clk_two(rbspi, spi_ioc, byte >> 0);
+}
+
+static void rb4xx_set_cs(struct spi_device *spi, bool enable)
+{
+	struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
+
+	/*
+	 * Setting CS is done along with bitbanging the actual values,
+	 * since it's all on the same hardware register. However the
+	 * CPLD needs CS deselected after every command.
+	 */
+	if (enable)
+		rb4xx_write(rbspi, AR71XX_SPI_REG_IOC,
+			    AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1);
+}
+
+static int rb4xx_transfer_one(struct spi_master *master,
+			      struct spi_device *spi, struct spi_transfer *t)
+{
+	struct rb4xx_spi *rbspi = spi_master_get_devdata(master);
+	int i;
+	u32 spi_ioc;
+	u8 *rx_buf;
+	const u8 *tx_buf;
+
+	/*
+	 * Prime the SPI register with the SPI device selected. The m25p80 boot
+	 * flash and CPLD share the CS0 pin. This works because the CPLD's
+	 * command set was designed to almost not clash with that of the
+	 * boot flash.
+	 */
+	if (spi->chip_select == 2)
+		/* MMC */
+		spi_ioc = AR71XX_SPI_IOC_CS0;
+	else
+		/* Boot flash and CPLD */
+		spi_ioc = AR71XX_SPI_IOC_CS1;
+
+	tx_buf = t->tx_buf;
+	rx_buf = t->rx_buf;
+	for (i = 0; i < t->len; ++i) {
+		if (t->tx_nbits == SPI_NBITS_DUAL)
+			/* CPLD can use two-wire transfers */
+			do_spi_byte_two(rbspi, spi_ioc, tx_buf[i]);
+		else
+			do_spi_byte(rbspi, spi_ioc, tx_buf[i]);
+		if (!rx_buf)
+			continue;
+		rx_buf[i] = rb4xx_read(rbspi, AR71XX_SPI_REG_RDS);
+	}
+	spi_finalize_current_transfer(master);
+
+	return 0;
+}
+
+static int rb4xx_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct clk *ahb_clk;
+	struct rb4xx_spi *rbspi;
+	struct resource *r;
+	int err;
+	void __iomem *spi_base;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	spi_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(spi_base))
+		return PTR_ERR(spi_base);
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
+	if (!master)
+		return -ENOMEM;
+
+	ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(ahb_clk))
+		return PTR_ERR(ahb_clk);
+
+	master->bus_num = 0;
+	master->num_chipselect = 3;
+	master->mode_bits = SPI_TX_DUAL;
+	master->bits_per_word_mask = BIT(7);
+	master->flags = SPI_MASTER_MUST_TX;
+	master->transfer_one = rb4xx_transfer_one;
+	master->set_cs = rb4xx_set_cs;
+
+	err = devm_spi_register_master(&pdev->dev, master);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register SPI master\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(ahb_clk);
+	if (err)
+		return err;
+
+	rbspi = spi_master_get_devdata(master);
+	rbspi->base = spi_base;
+	rbspi->clk = ahb_clk;
+	platform_set_drvdata(pdev, rbspi);
+
+	/* Enable SPI */
+	rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+	return 0;
+}
+
+static int rb4xx_spi_remove(struct platform_device *pdev)
+{
+	struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(rbspi->clk);
+
+	return 0;
+}
+
+static struct platform_driver rb4xx_spi_drv = {
+	.probe = rb4xx_spi_probe,
+	.remove = rb4xx_spi_remove,
+	.driver = {
+		.name = "rb4xx-spi",
+	},
+};
+
+module_platform_driver(rb4xx_spi_drv);
+
+MODULE_DESCRIPTION("Mikrotik RB4xx SPI controller driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
+MODULE_LICENSE("GPL v2");

drivers/spi/spi-rspi.c

@@ -665,15 +665,12 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
 static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
 					 struct spi_transfer *xfer)
 {
-	if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
-		/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
-		int ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
-					xfer->rx_buf ? &xfer->rx_sg : NULL);
-		if (ret != -EAGAIN)
-			return 0;
-	}
+	if (!rspi->master->can_dma || !__rspi_can_dma(rspi, xfer))
+		return -EAGAIN;
 
-	return -EAGAIN;
+	/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
+	return rspi_dma_transfer(rspi, &xfer->tx_sg,
+				xfer->rx_buf ? &xfer->rx_sg : NULL);
 }
 
 static int rspi_common_transfer(struct rspi_data *rspi,
@@ -724,7 +721,7 @@ static int rspi_rz_transfer_one(struct spi_master *master,
 	return rspi_common_transfer(rspi, xfer);
 }
 
-static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx,
+static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
 					u8 *rx, unsigned int len)
 {
 	int i, n, ret;
@@ -771,12 +768,8 @@ static int qspi_transfer_out_in(struct rspi_data *rspi,
 	if (ret != -EAGAIN)
 		return ret;
 
-	ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf,
+	return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
 					    xfer->rx_buf, xfer->len);
-	if (ret < 0)
-		return ret;
-
-	return 0;
 }
 
 static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
@@ -1300,7 +1293,7 @@ error1:
 	return ret;
 }
 
-static struct platform_device_id spi_driver_ids[] = {
+static const struct platform_device_id spi_driver_ids[] = {
 	{ "rspi",	(kernel_ulong_t)&rspi_ops },
 	{ "rspi-rz",	(kernel_ulong_t)&rspi_rz_ops },
 	{ "qspi",	(kernel_ulong_t)&qspi_ops },

drivers/spi/spi-s3c64xx.c

@@ -1347,7 +1347,7 @@ static struct s3c64xx_spi_port_config exynos7_spi_port_config = {
 	.quirks		= S3C64XX_SPI_QUIRK_CS_AUTO,
 };
 
-static struct platform_device_id s3c64xx_spi_driver_ids[] = {
+static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
 	{
 		.name		= "s3c2443-spi",
 		.driver_data	= (kernel_ulong_t)&s3c2443_spi_port_config,

drivers/spi/spi-sh-msiof.c

@@ -1263,7 +1263,7 @@ static int sh_msiof_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id spi_driver_ids[] = {
+static const struct platform_device_id spi_driver_ids[] = {
 	{ "spi_sh_msiof",	(kernel_ulong_t)&sh_data },
 	{ "spi_r8a7790_msiof",	(kernel_ulong_t)&r8a779x_data },
 	{ "spi_r8a7791_msiof",	(kernel_ulong_t)&r8a779x_data },

drivers/spi/spi-sirf.c

@@ -26,28 +26,6 @@
 #include <linux/reset.h>
 
 #define DRIVER_NAME "sirfsoc_spi"
-
-#define SIRFSOC_SPI_CTRL		0x0000
-#define SIRFSOC_SPI_CMD			0x0004
-#define SIRFSOC_SPI_TX_RX_EN		0x0008
-#define SIRFSOC_SPI_INT_EN		0x000C
-#define SIRFSOC_SPI_INT_STATUS		0x0010
-#define SIRFSOC_SPI_TX_DMA_IO_CTRL	0x0100
-#define SIRFSOC_SPI_TX_DMA_IO_LEN	0x0104
-#define SIRFSOC_SPI_TXFIFO_CTRL		0x0108
-#define SIRFSOC_SPI_TXFIFO_LEVEL_CHK	0x010C
-#define SIRFSOC_SPI_TXFIFO_OP		0x0110
-#define SIRFSOC_SPI_TXFIFO_STATUS	0x0114
-#define SIRFSOC_SPI_TXFIFO_DATA		0x0118
-#define SIRFSOC_SPI_RX_DMA_IO_CTRL	0x0120
-#define SIRFSOC_SPI_RX_DMA_IO_LEN	0x0124
-#define SIRFSOC_SPI_RXFIFO_CTRL		0x0128
-#define SIRFSOC_SPI_RXFIFO_LEVEL_CHK	0x012C
-#define SIRFSOC_SPI_RXFIFO_OP		0x0130
-#define SIRFSOC_SPI_RXFIFO_STATUS	0x0134
-#define SIRFSOC_SPI_RXFIFO_DATA		0x0138
-#define SIRFSOC_SPI_DUMMY_DELAY_CTL	0x0144
-
 /* SPI CTRL register defines */
 #define SIRFSOC_SPI_SLV_MODE		BIT(16)
 #define SIRFSOC_SPI_CMD_MODE		BIT(17)
@@ -80,8 +58,6 @@
 #define SIRFSOC_SPI_TXFIFO_THD_INT_EN	BIT(9)
 #define SIRFSOC_SPI_FRM_END_INT_EN	BIT(10)
 
-#define SIRFSOC_SPI_INT_MASK_ALL	0x1FFF
-
 /* Interrupt status */
 #define SIRFSOC_SPI_RX_DONE		BIT(0)
 #define SIRFSOC_SPI_TX_DONE		BIT(1)
@@ -110,20 +86,66 @@
 #define SIRFSOC_SPI_FIFO_WIDTH_BYTE	(0 << 0)
 #define SIRFSOC_SPI_FIFO_WIDTH_WORD	(1 << 0)
 #define SIRFSOC_SPI_FIFO_WIDTH_DWORD	(2 << 0)
-
-/* FIFO Status */
-#define	SIRFSOC_SPI_FIFO_LEVEL_MASK	0xFF
-#define SIRFSOC_SPI_FIFO_FULL		BIT(8)
-#define SIRFSOC_SPI_FIFO_EMPTY		BIT(9)
-
-/* 256 bytes rx/tx FIFO */
-#define SIRFSOC_SPI_FIFO_SIZE		256
-#define SIRFSOC_SPI_DAT_FRM_LEN_MAX	(64 * 1024)
-
-#define SIRFSOC_SPI_FIFO_SC(x)		((x) & 0x3F)
-#define SIRFSOC_SPI_FIFO_LC(x)		(((x) & 0x3F) << 10)
-#define SIRFSOC_SPI_FIFO_HC(x)		(((x) & 0x3F) << 20)
-#define SIRFSOC_SPI_FIFO_THD(x)		(((x) & 0xFF) << 2)
+/* USP related */
+#define SIRFSOC_USP_SYNC_MODE		BIT(0)
+#define SIRFSOC_USP_SLV_MODE		BIT(1)
+#define SIRFSOC_USP_LSB			BIT(4)
+#define SIRFSOC_USP_EN			BIT(5)
+#define SIRFSOC_USP_RXD_FALLING_EDGE	BIT(6)
+#define SIRFSOC_USP_TXD_FALLING_EDGE	BIT(7)
+#define SIRFSOC_USP_CS_HIGH_VALID	BIT(9)
+#define SIRFSOC_USP_SCLK_IDLE_STAT	BIT(11)
+#define SIRFSOC_USP_TFS_IO_MODE		BIT(14)
+#define SIRFSOC_USP_TFS_IO_INPUT	BIT(19)
+
+#define SIRFSOC_USP_RXD_DELAY_LEN_MASK	0xFF
+#define SIRFSOC_USP_TXD_DELAY_LEN_MASK	0xFF
+#define SIRFSOC_USP_RXD_DELAY_OFFSET	0
+#define SIRFSOC_USP_TXD_DELAY_OFFSET	8
+#define SIRFSOC_USP_RXD_DELAY_LEN	1
+#define SIRFSOC_USP_TXD_DELAY_LEN	1
+#define SIRFSOC_USP_CLK_DIVISOR_OFFSET	21
+#define SIRFSOC_USP_CLK_DIVISOR_MASK	0x3FF
+#define SIRFSOC_USP_CLK_10_11_MASK	0x3
+#define SIRFSOC_USP_CLK_10_11_OFFSET	30
+#define SIRFSOC_USP_CLK_12_15_MASK	0xF
+#define SIRFSOC_USP_CLK_12_15_OFFSET	24
+
+#define SIRFSOC_USP_TX_DATA_OFFSET	0
+#define SIRFSOC_USP_TX_SYNC_OFFSET	8
+#define SIRFSOC_USP_TX_FRAME_OFFSET	16
+#define SIRFSOC_USP_TX_SHIFTER_OFFSET	24
+
+#define SIRFSOC_USP_TX_DATA_MASK	0xFF
+#define SIRFSOC_USP_TX_SYNC_MASK	0xFF
+#define SIRFSOC_USP_TX_FRAME_MASK	0xFF
+#define SIRFSOC_USP_TX_SHIFTER_MASK	0x1F
+
+#define SIRFSOC_USP_RX_DATA_OFFSET	0
+#define SIRFSOC_USP_RX_FRAME_OFFSET	8
+#define SIRFSOC_USP_RX_SHIFTER_OFFSET	16
+
+#define SIRFSOC_USP_RX_DATA_MASK	0xFF
+#define SIRFSOC_USP_RX_FRAME_MASK	0xFF
+#define SIRFSOC_USP_RX_SHIFTER_MASK	0x1F
+#define SIRFSOC_USP_CS_HIGH_VALUE	BIT(1)
+
+#define SIRFSOC_SPI_FIFO_SC_OFFSET	0
+#define SIRFSOC_SPI_FIFO_LC_OFFSET	10
+#define SIRFSOC_SPI_FIFO_HC_OFFSET	20
+
+#define SIRFSOC_SPI_FIFO_FULL_MASK(s)	(1 << ((s)->fifo_full_offset))
+#define SIRFSOC_SPI_FIFO_EMPTY_MASK(s)	(1 << ((s)->fifo_full_offset + 1))
+#define SIRFSOC_SPI_FIFO_THD_MASK(s)	((s)->fifo_size - 1)
+#define SIRFSOC_SPI_FIFO_THD_OFFSET	2
+#define SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(s, val)	\
+	((val) & (s)->fifo_level_chk_mask)
+
+enum sirf_spi_type {
+	SIRF_REAL_SPI,
+	SIRF_USP_SPI_P2,
+	SIRF_USP_SPI_A7,
+};
 
 /*
  * only if the rx/tx buffer and transfer size are 4-bytes aligned, we use dma
@@ -137,6 +159,95 @@
 #define SIRFSOC_MAX_CMD_BYTES	4
 #define SIRFSOC_SPI_DEFAULT_FRQ 1000000
 
+struct sirf_spi_register {
+	/*SPI and USP-SPI common*/
+	u32 tx_rx_en;
+	u32 int_en;
+	u32 int_st;
+	u32 tx_dma_io_ctrl;
+	u32 tx_dma_io_len;
+	u32 txfifo_ctrl;
+	u32 txfifo_level_chk;
+	u32 txfifo_op;
+	u32 txfifo_st;
+	u32 txfifo_data;
+	u32 rx_dma_io_ctrl;
+	u32 rx_dma_io_len;
+	u32 rxfifo_ctrl;
+	u32 rxfifo_level_chk;
+	u32 rxfifo_op;
+	u32 rxfifo_st;
+	u32 rxfifo_data;
+	/*SPI self*/
+	u32 spi_ctrl;
+	u32 spi_cmd;
+	u32 spi_dummy_delay_ctrl;
+	/*USP-SPI self*/
+	u32 usp_mode1;
+	u32 usp_mode2;
+	u32 usp_tx_frame_ctrl;
+	u32 usp_rx_frame_ctrl;
+	u32 usp_pin_io_data;
+	u32 usp_risc_dsp_mode;
+	u32 usp_async_param_reg;
+	u32 usp_irda_x_mode_div;
+	u32 usp_sm_cfg;
+	u32 usp_int_en_clr;
+};
+
+static const struct sirf_spi_register real_spi_register = {
+	.tx_rx_en		= 0x8,
+	.int_en		= 0xc,
+	.int_st		= 0x10,
+	.tx_dma_io_ctrl	= 0x100,
+	.tx_dma_io_len	= 0x104,
+	.txfifo_ctrl	= 0x108,
+	.txfifo_level_chk	= 0x10c,
+	.txfifo_op		= 0x110,
+	.txfifo_st		= 0x114,
+	.txfifo_data	= 0x118,
+	.rx_dma_io_ctrl	= 0x120,
+	.rx_dma_io_len	= 0x124,
+	.rxfifo_ctrl	= 0x128,
+	.rxfifo_level_chk	= 0x12c,
+	.rxfifo_op		= 0x130,
+	.rxfifo_st		= 0x134,
+	.rxfifo_data	= 0x138,
+	.spi_ctrl		= 0x0,
+	.spi_cmd		= 0x4,
+	.spi_dummy_delay_ctrl	= 0x144,
+};
+
+static const struct sirf_spi_register usp_spi_register = {
+	.tx_rx_en		= 0x10,
+	.int_en		= 0x14,
+	.int_st		= 0x18,
+	.tx_dma_io_ctrl	= 0x100,
+	.tx_dma_io_len	= 0x104,
+	.txfifo_ctrl	= 0x108,
+	.txfifo_level_chk	= 0x10c,
+	.txfifo_op		= 0x110,
+	.txfifo_st		= 0x114,
+	.txfifo_data	= 0x118,
+	.rx_dma_io_ctrl	= 0x120,
+	.rx_dma_io_len	= 0x124,
+	.rxfifo_ctrl	= 0x128,
+	.rxfifo_level_chk	= 0x12c,
+	.rxfifo_op		= 0x130,
+	.rxfifo_st		= 0x134,
+	.rxfifo_data	= 0x138,
+	.usp_mode1		= 0x0,
+	.usp_mode2		= 0x4,
+	.usp_tx_frame_ctrl	= 0x8,
+	.usp_rx_frame_ctrl	= 0xc,
+	.usp_pin_io_data	= 0x1c,
+	.usp_risc_dsp_mode	= 0x20,
+	.usp_async_param_reg	= 0x24,
+	.usp_irda_x_mode_div	= 0x28,
+	.usp_sm_cfg		= 0x2c,
+	.usp_int_en_clr		= 0x140,
+};
+
 struct sirfsoc_spi {
 	struct spi_bitbang bitbang;
 	struct completion rx_done;
@@ -164,7 +275,6 @@ struct sirfsoc_spi {
 	struct dma_chan *tx_chan;
 	dma_addr_t src_start;
 	dma_addr_t dst_start;
-	void *dummypage;
 	int word_width; /* in bytes */
 
 	/*
@@ -173,14 +283,39 @@ struct sirfsoc_spi {
 	 */
 	bool	tx_by_cmd;
 	bool	hw_cs;
+	enum sirf_spi_type type;
+	const struct sirf_spi_register *regs;
+	unsigned int fifo_size;
+	/* fifo empty offset is (fifo full offset + 1)*/
+	unsigned int fifo_full_offset;
+	/* fifo_level_chk_mask is (fifo_size/4 - 1) */
+	unsigned int fifo_level_chk_mask;
+	unsigned int dat_max_frm_len;
+};
+
+struct sirf_spi_comp_data {
+	const struct sirf_spi_register *regs;
+	enum sirf_spi_type type;
+	unsigned int dat_max_frm_len;
+	unsigned int fifo_size;
+	void (*hwinit)(struct sirfsoc_spi *sspi);
 };
 
+static void sirfsoc_usp_hwinit(struct sirfsoc_spi *sspi)
+{
+	/* reset USP and let USP can operate */
+	writel(readl(sspi->base + sspi->regs->usp_mode1) &
+		~SIRFSOC_USP_EN, sspi->base + sspi->regs->usp_mode1);
+	writel(readl(sspi->base + sspi->regs->usp_mode1) |
+		SIRFSOC_USP_EN, sspi->base + sspi->regs->usp_mode1);
+}
+
 static void spi_sirfsoc_rx_word_u8(struct sirfsoc_spi *sspi)
 {
 	u32 data;
 	u8 *rx = sspi->rx;
 
-	data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA);
+	data = readl(sspi->base + sspi->regs->rxfifo_data);
 
 	if (rx) {
 		*rx++ = (u8) data;
@@ -199,8 +334,7 @@ static void spi_sirfsoc_tx_word_u8(struct sirfsoc_spi *sspi)
 		data = *tx++;
 		sspi->tx = tx;
 	}
-
-	writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA);
+	writel(data, sspi->base + sspi->regs->txfifo_data);
 	sspi->left_tx_word--;
 }
 
@@ -209,7 +343,7 @@ static void spi_sirfsoc_rx_word_u16(struct sirfsoc_spi *sspi)
 	u32 data;
 	u16 *rx = sspi->rx;
 
-	data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA);
+	data = readl(sspi->base + sspi->regs->rxfifo_data);
 
 	if (rx) {
 		*rx++ = (u16) data;
@@ -229,7 +363,7 @@ static void spi_sirfsoc_tx_word_u16(struct sirfsoc_spi *sspi)
 		sspi->tx = tx;
 	}
 
-	writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA);
+	writel(data, sspi->base + sspi->regs->txfifo_data);
 	sspi->left_tx_word--;
 }
 
@@ -238,7 +372,7 @@ static void spi_sirfsoc_rx_word_u32(struct sirfsoc_spi *sspi)
 	u32 data;
 	u32 *rx = sspi->rx;
 
-	data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA);
+	data = readl(sspi->base + sspi->regs->rxfifo_data);
 
 	if (rx) {
 		*rx++ = (u32) data;
@@ -259,41 +393,59 @@ static void spi_sirfsoc_tx_word_u32(struct sirfsoc_spi *sspi)
 		sspi->tx = tx;
 	}
 
-	writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA);
+	writel(data, sspi->base + sspi->regs->txfifo_data);
 	sspi->left_tx_word--;
 }
 
 static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id)
 {
 	struct sirfsoc_spi *sspi = dev_id;
-	u32 spi_stat = readl(sspi->base + SIRFSOC_SPI_INT_STATUS);
-	if (sspi->tx_by_cmd && (spi_stat & SIRFSOC_SPI_FRM_END)) {
+	u32 spi_stat;
+
+	spi_stat = readl(sspi->base + sspi->regs->int_st);
+	if (sspi->tx_by_cmd && sspi->type == SIRF_REAL_SPI
+		&& (spi_stat & SIRFSOC_SPI_FRM_END)) {
 		complete(&sspi->tx_done);
-		writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
-		writel(SIRFSOC_SPI_INT_MASK_ALL,
-				sspi->base + SIRFSOC_SPI_INT_STATUS);
+		writel(0x0, sspi->base + sspi->regs->int_en);
+		writel(readl(sspi->base + sspi->regs->int_st),
+				sspi->base + sspi->regs->int_st);
 		return IRQ_HANDLED;
 	}
-
 	/* Error Conditions */
 	if (spi_stat & SIRFSOC_SPI_RX_OFLOW ||
 			spi_stat & SIRFSOC_SPI_TX_UFLOW) {
 		complete(&sspi->tx_done);
 		complete(&sspi->rx_done);
-		writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
-		writel(SIRFSOC_SPI_INT_MASK_ALL,
-				sspi->base + SIRFSOC_SPI_INT_STATUS);
+		switch (sspi->type) {
+		case SIRF_REAL_SPI:
+		case SIRF_USP_SPI_P2:
+			writel(0x0, sspi->base + sspi->regs->int_en);
+			break;
+		case SIRF_USP_SPI_A7:
+			writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+			break;
+		}
+		writel(readl(sspi->base + sspi->regs->int_st),
+				sspi->base + sspi->regs->int_st);
 		return IRQ_HANDLED;
 	}
 	if (spi_stat & SIRFSOC_SPI_TXFIFO_EMPTY)
 		complete(&sspi->tx_done);
-	while (!(readl(sspi->base + SIRFSOC_SPI_INT_STATUS) &
+	while (!(readl(sspi->base + sspi->regs->int_st) &
 		SIRFSOC_SPI_RX_IO_DMA))
 		cpu_relax();
 	complete(&sspi->rx_done);
-	writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN);
-	writel(SIRFSOC_SPI_INT_MASK_ALL,
-			sspi->base + SIRFSOC_SPI_INT_STATUS);
+	switch (sspi->type) {
+	case SIRF_REAL_SPI:
+	case SIRF_USP_SPI_P2:
+		writel(0x0, sspi->base + sspi->regs->int_en);
+		break;
+	case SIRF_USP_SPI_A7:
+		writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+		break;
+	}
+	writel(readl(sspi->base + sspi->regs->int_st),
+			sspi->base + sspi->regs->int_st);
 
 	return IRQ_HANDLED;
 }
@@ -313,8 +465,8 @@ static void spi_sirfsoc_cmd_transfer(struct spi_device *spi,
 	u32 cmd;
 
 	sspi = spi_master_get_devdata(spi->master);
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->txfifo_op);
+	writel(SIRFSOC_SPI_FIFO_START, sspi->base + sspi->regs->txfifo_op);
 	memcpy(&cmd, sspi->tx, t->len);
 	if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST))
 		cmd = cpu_to_be32(cmd) >>
@@ -322,11 +474,11 @@ static void spi_sirfsoc_cmd_transfer(struct spi_device *spi,
 	if (sspi->word_width == 2 && t->len == 4 &&
 			(!(spi->mode & SPI_LSB_FIRST)))
 		cmd = ((cmd & 0xffff) << 16) | (cmd >> 16);
-	writel(cmd, sspi->base + SIRFSOC_SPI_CMD);
+	writel(cmd, sspi->base + sspi->regs->spi_cmd);
 	writel(SIRFSOC_SPI_FRM_END_INT_EN,
-		sspi->base + SIRFSOC_SPI_INT_EN);
+		sspi->base + sspi->regs->int_en);
 	writel(SIRFSOC_SPI_CMD_TX_EN,
-		sspi->base + SIRFSOC_SPI_TX_RX_EN);
+		sspi->base + sspi->regs->tx_rx_en);
 	if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
 		dev_err(&spi->dev, "cmd transfer timeout\n");
 		return;
@@ -342,25 +494,56 @@ static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
 	int timeout = t->len * 10;
 
 	sspi = spi_master_get_devdata(spi->master);
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
-	writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS);
-	if (sspi->left_tx_word < SIRFSOC_SPI_DAT_FRM_LEN_MAX) {
-		writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
-			SIRFSOC_SPI_ENA_AUTO_CLR | SIRFSOC_SPI_MUL_DAT_MODE,
-			sspi->base + SIRFSOC_SPI_CTRL);
-		writel(sspi->left_tx_word - 1,
-				sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
-		writel(sspi->left_tx_word - 1,
-				sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
+	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->rxfifo_op);
+	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->txfifo_op);
+	switch (sspi->type) {
+	case SIRF_REAL_SPI:
+		writel(SIRFSOC_SPI_FIFO_START,
+			sspi->base + sspi->regs->rxfifo_op);
+		writel(SIRFSOC_SPI_FIFO_START,
+			sspi->base + sspi->regs->txfifo_op);
+		writel(0, sspi->base + sspi->regs->int_en);
+		break;
+	case SIRF_USP_SPI_P2:
+		writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+		writel(0x0, sspi->base + sspi->regs->txfifo_op);
+		writel(0, sspi->base + sspi->regs->int_en);
+		break;
+	case SIRF_USP_SPI_A7:
+		writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+		writel(0x0, sspi->base + sspi->regs->txfifo_op);
+		writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+		break;
+	}
+	writel(readl(sspi->base + sspi->regs->int_st),
+		sspi->base + sspi->regs->int_st);
+	if (sspi->left_tx_word < sspi->dat_max_frm_len) {
+		switch (sspi->type) {
+		case SIRF_REAL_SPI:
+			writel(readl(sspi->base + sspi->regs->spi_ctrl) |
+				SIRFSOC_SPI_ENA_AUTO_CLR |
+				SIRFSOC_SPI_MUL_DAT_MODE,
+				sspi->base + sspi->regs->spi_ctrl);
+			writel(sspi->left_tx_word - 1,
+				sspi->base + sspi->regs->tx_dma_io_len);
+			writel(sspi->left_tx_word - 1,
+				sspi->base + sspi->regs->rx_dma_io_len);
+			break;
+		case SIRF_USP_SPI_P2:
+		case SIRF_USP_SPI_A7:
+			/*USP simulate SPI, tx/rx_dma_io_len indicates bytes*/
+			writel(sspi->left_tx_word * sspi->word_width,
+				sspi->base + sspi->regs->tx_dma_io_len);
+			writel(sspi->left_tx_word * sspi->word_width,
+				sspi->base + sspi->regs->rx_dma_io_len);
+			break;
+		}
 	} else {
-		writel(readl(sspi->base + SIRFSOC_SPI_CTRL),
-			sspi->base + SIRFSOC_SPI_CTRL);
-		writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
-		writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
+		if (sspi->type == SIRF_REAL_SPI)
+			writel(readl(sspi->base + sspi->regs->spi_ctrl),
+				sspi->base + sspi->regs->spi_ctrl);
+		writel(0, sspi->base + sspi->regs->tx_dma_io_len);
+		writel(0, sspi->base + sspi->regs->rx_dma_io_len);
 	}
 	sspi->dst_start = dma_map_single(&spi->dev, sspi->rx, t->len,
 					(t->tx_buf != t->rx_buf) ?
@@ -385,7 +568,14 @@ static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
 	dma_async_issue_pending(sspi->tx_chan);
 	dma_async_issue_pending(sspi->rx_chan);
 	writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN,
-			sspi->base + SIRFSOC_SPI_TX_RX_EN);
+			sspi->base + sspi->regs->tx_rx_en);
+	if (sspi->type == SIRF_USP_SPI_P2 ||
+		sspi->type == SIRF_USP_SPI_A7) {
+		writel(SIRFSOC_SPI_FIFO_START,
+			sspi->base + sspi->regs->rxfifo_op);
+		writel(SIRFSOC_SPI_FIFO_START,
+			sspi->base + sspi->regs->txfifo_op);
+	}
 	if (wait_for_completion_timeout(&sspi->rx_done, timeout) == 0) {
 		dev_err(&spi->dev, "transfer timeout\n");
 		dmaengine_terminate_all(sspi->rx_chan);
@@ -398,15 +588,21 @@ static void spi_sirfsoc_dma_transfer(struct spi_device *spi,
 	 */
 	if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) {
 		dev_err(&spi->dev, "transfer timeout\n");
+		if (sspi->type == SIRF_USP_SPI_P2 ||
+			sspi->type == SIRF_USP_SPI_A7)
+			writel(0, sspi->base + sspi->regs->tx_rx_en);
 		dmaengine_terminate_all(sspi->tx_chan);
 	}
 	dma_unmap_single(&spi->dev, sspi->src_start, t->len, DMA_TO_DEVICE);
 	dma_unmap_single(&spi->dev, sspi->dst_start, t->len, DMA_FROM_DEVICE);
 	/* TX, RX FIFO stop */
-	writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	if (sspi->left_tx_word >= SIRFSOC_SPI_DAT_FRM_LEN_MAX)
-		writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN);
+	writel(0, sspi->base + sspi->regs->rxfifo_op);
+	writel(0, sspi->base + sspi->regs->txfifo_op);
+	if (sspi->left_tx_word >= sspi->dat_max_frm_len)
+		writel(0, sspi->base + sspi->regs->tx_rx_en);
+	if (sspi->type == SIRF_USP_SPI_P2 ||
+		sspi->type == SIRF_USP_SPI_A7)
+		writel(0, sspi->base + sspi->regs->tx_rx_en);
 }
 
 static void spi_sirfsoc_pio_transfer(struct spi_device *spi,
@@ -414,57 +610,105 @@ static void spi_sirfsoc_pio_transfer(struct spi_device *spi,
 {
 	struct sirfsoc_spi *sspi;
 	int timeout = t->len * 10;
+	unsigned int data_units;
 
 	sspi = spi_master_get_devdata(spi->master);
 	do {
 		writel(SIRFSOC_SPI_FIFO_RESET,
-			sspi->base + SIRFSOC_SPI_RXFIFO_OP);
+			sspi->base + sspi->regs->rxfifo_op);
 		writel(SIRFSOC_SPI_FIFO_RESET,
-			sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-		writel(SIRFSOC_SPI_FIFO_START,
-			sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-		writel(SIRFSOC_SPI_FIFO_START,
-			sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-		writel(0, sspi->base + SIRFSOC_SPI_INT_EN);
-		writel(SIRFSOC_SPI_INT_MASK_ALL,
-			sspi->base + SIRFSOC_SPI_INT_STATUS);
-		writel(readl(sspi->base + SIRFSOC_SPI_CTRL) |
-			SIRFSOC_SPI_MUL_DAT_MODE | SIRFSOC_SPI_ENA_AUTO_CLR,
-			sspi->base + SIRFSOC_SPI_CTRL);
-		writel(min(sspi->left_tx_word, (u32)(256 / sspi->word_width))
-				- 1, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN);
-		writel(min(sspi->left_rx_word, (u32)(256 / sspi->word_width))
-				- 1, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN);
-		while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS)
-			& SIRFSOC_SPI_FIFO_FULL)) && sspi->left_tx_word)
+			sspi->base + sspi->regs->txfifo_op);
+		switch (sspi->type) {
+		case SIRF_USP_SPI_P2:
+			writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+			writel(0x0, sspi->base + sspi->regs->txfifo_op);
+			writel(0, sspi->base + sspi->regs->int_en);
+			writel(readl(sspi->base + sspi->regs->int_st),
+				sspi->base + sspi->regs->int_st);
+			writel(min((sspi->left_tx_word * sspi->word_width),
+				sspi->fifo_size),
+				sspi->base + sspi->regs->tx_dma_io_len);
+			writel(min((sspi->left_rx_word * sspi->word_width),
+				sspi->fifo_size),
+				sspi->base + sspi->regs->rx_dma_io_len);
+			break;
+		case SIRF_USP_SPI_A7:
+			writel(0x0, sspi->base + sspi->regs->rxfifo_op);
+			writel(0x0, sspi->base + sspi->regs->txfifo_op);
+			writel(~0UL, sspi->base + sspi->regs->usp_int_en_clr);
+			writel(readl(sspi->base + sspi->regs->int_st),
+				sspi->base + sspi->regs->int_st);
+			writel(min((sspi->left_tx_word * sspi->word_width),
+				sspi->fifo_size),
+				sspi->base + sspi->regs->tx_dma_io_len);
+			writel(min((sspi->left_rx_word * sspi->word_width),
+				sspi->fifo_size),
+				sspi->base + sspi->regs->rx_dma_io_len);
+			break;
+		case SIRF_REAL_SPI:
+			writel(SIRFSOC_SPI_FIFO_START,
+				sspi->base + sspi->regs->rxfifo_op);
+			writel(SIRFSOC_SPI_FIFO_START,
+				sspi->base + sspi->regs->txfifo_op);
+			writel(0, sspi->base + sspi->regs->int_en);
+			writel(readl(sspi->base + sspi->regs->int_st),
+				sspi->base + sspi->regs->int_st);
+			writel(readl(sspi->base + sspi->regs->spi_ctrl) |
+				SIRFSOC_SPI_MUL_DAT_MODE |
+				SIRFSOC_SPI_ENA_AUTO_CLR,
+				sspi->base + sspi->regs->spi_ctrl);
+			data_units = sspi->fifo_size / sspi->word_width;
+			writel(min(sspi->left_tx_word, data_units) - 1,
+				sspi->base + sspi->regs->tx_dma_io_len);
+			writel(min(sspi->left_rx_word, data_units) - 1,
+				sspi->base + sspi->regs->rx_dma_io_len);
+			break;
+		}
+		while (!((readl(sspi->base + sspi->regs->txfifo_st)
+			& SIRFSOC_SPI_FIFO_FULL_MASK(sspi))) &&
+			sspi->left_tx_word)
 			sspi->tx_word(sspi);
 		writel(SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN |
 			SIRFSOC_SPI_TX_UFLOW_INT_EN |
 			SIRFSOC_SPI_RX_OFLOW_INT_EN |
 			SIRFSOC_SPI_RX_IO_DMA_INT_EN,
-			sspi->base + SIRFSOC_SPI_INT_EN);
+			sspi->base + sspi->regs->int_en);
 		writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN,
-			sspi->base + SIRFSOC_SPI_TX_RX_EN);
+			sspi->base + sspi->regs->tx_rx_en);
+		if (sspi->type == SIRF_USP_SPI_P2 ||
+			sspi->type == SIRF_USP_SPI_A7) {
+			writel(SIRFSOC_SPI_FIFO_START,
+				sspi->base + sspi->regs->rxfifo_op);
+			writel(SIRFSOC_SPI_FIFO_START,
+				sspi->base + sspi->regs->txfifo_op);
+		}
 		if (!wait_for_completion_timeout(&sspi->tx_done, timeout) ||
 			!wait_for_completion_timeout(&sspi->rx_done, timeout)) {
 			dev_err(&spi->dev, "transfer timeout\n");
+			if (sspi->type == SIRF_USP_SPI_P2 ||
+				sspi->type == SIRF_USP_SPI_A7)
+				writel(0, sspi->base + sspi->regs->tx_rx_en);
 			break;
 		}
-		while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS)
-			& SIRFSOC_SPI_FIFO_EMPTY)) && sspi->left_rx_word)
+		while (!((readl(sspi->base + sspi->regs->rxfifo_st)
+			& SIRFSOC_SPI_FIFO_EMPTY_MASK(sspi))) &&
+			sspi->left_rx_word)
 			sspi->rx_word(sspi);
-		writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-		writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
+		if (sspi->type == SIRF_USP_SPI_P2 ||
+			sspi->type == SIRF_USP_SPI_A7)
+			writel(0, sspi->base + sspi->regs->tx_rx_en);
+		writel(0, sspi->base + sspi->regs->rxfifo_op);
+		writel(0, sspi->base + sspi->regs->txfifo_op);
 	} while (sspi->left_tx_word != 0 || sspi->left_rx_word != 0);
 }
 
 static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
 {
 	struct sirfsoc_spi *sspi;
-	sspi = spi_master_get_devdata(spi->master);
 
-	sspi->tx = t->tx_buf ? t->tx_buf : sspi->dummypage;
-	sspi->rx = t->rx_buf ? t->rx_buf : sspi->dummypage;
+	sspi = spi_master_get_devdata(spi->master);
+	sspi->tx = t->tx_buf;
+	sspi->rx = t->rx_buf;
 	sspi->left_tx_word = sspi->left_rx_word = t->len / sspi->word_width;
 	reinit_completion(&sspi->rx_done);
 	reinit_completion(&sspi->tx_done);
@@ -473,7 +717,7 @@ static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t)
 	 * null, just fill command data into command register and wait for its
 	 * completion.
 	 */
-	if (sspi->tx_by_cmd)
+	if (sspi->type == SIRF_REAL_SPI && sspi->tx_by_cmd)
 		spi_sirfsoc_cmd_transfer(spi, t);
 	else if (IS_DMA_VALID(t))
 		spi_sirfsoc_dma_transfer(spi, t);
@@ -488,22 +732,49 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value)
 	struct sirfsoc_spi *sspi = spi_master_get_devdata(spi->master);
 
 	if (sspi->hw_cs) {
-		u32 regval = readl(sspi->base + SIRFSOC_SPI_CTRL);
-		switch (value) {
-		case BITBANG_CS_ACTIVE:
-			if (spi->mode & SPI_CS_HIGH)
-				regval |= SIRFSOC_SPI_CS_IO_OUT;
-			else
-				regval &= ~SIRFSOC_SPI_CS_IO_OUT;
+		u32 regval;
+
+		switch (sspi->type) {
+		case SIRF_REAL_SPI:
+			regval = readl(sspi->base + sspi->regs->spi_ctrl);
+			switch (value) {
+			case BITBANG_CS_ACTIVE:
+				if (spi->mode & SPI_CS_HIGH)
+					regval |= SIRFSOC_SPI_CS_IO_OUT;
+				else
+					regval &= ~SIRFSOC_SPI_CS_IO_OUT;
+				break;
+			case BITBANG_CS_INACTIVE:
+				if (spi->mode & SPI_CS_HIGH)
+					regval &= ~SIRFSOC_SPI_CS_IO_OUT;
+				else
+					regval |= SIRFSOC_SPI_CS_IO_OUT;
+				break;
+			}
+			writel(regval, sspi->base + sspi->regs->spi_ctrl);
 			break;
-		case BITBANG_CS_INACTIVE:
-			if (spi->mode & SPI_CS_HIGH)
-				regval &= ~SIRFSOC_SPI_CS_IO_OUT;
-			else
-				regval |= SIRFSOC_SPI_CS_IO_OUT;
+		case SIRF_USP_SPI_P2:
+		case SIRF_USP_SPI_A7:
+			regval = readl(sspi->base +
+					sspi->regs->usp_pin_io_data);
+			switch (value) {
+			case BITBANG_CS_ACTIVE:
+				if (spi->mode & SPI_CS_HIGH)
+					regval |= SIRFSOC_USP_CS_HIGH_VALUE;
+				else
+					regval &= ~(SIRFSOC_USP_CS_HIGH_VALUE);
+				break;
+			case BITBANG_CS_INACTIVE:
+				if (spi->mode & SPI_CS_HIGH)
+					regval &= ~(SIRFSOC_USP_CS_HIGH_VALUE);
+				else
+					regval |= SIRFSOC_USP_CS_HIGH_VALUE;
+				break;
+			}
+			writel(regval,
+				sspi->base + sspi->regs->usp_pin_io_data);
 			break;
 		}
-		writel(regval, sspi->base + SIRFSOC_SPI_CTRL);
 	} else {
 		switch (value) {
 		case BITBANG_CS_ACTIVE:
@@ -518,27 +789,102 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value)
 	}
 }
 
+static int spi_sirfsoc_config_mode(struct spi_device *spi)
+{
+	struct sirfsoc_spi *sspi;
+	u32 regval, usp_mode1;
+
+	sspi = spi_master_get_devdata(spi->master);
+	regval = readl(sspi->base + sspi->regs->spi_ctrl);
+	usp_mode1 = readl(sspi->base + sspi->regs->usp_mode1);
+	if (!(spi->mode & SPI_CS_HIGH)) {
+		regval |= SIRFSOC_SPI_CS_IDLE_STAT;
+		usp_mode1 &= ~SIRFSOC_USP_CS_HIGH_VALID;
+	} else {
+		regval &= ~SIRFSOC_SPI_CS_IDLE_STAT;
+		usp_mode1 |= SIRFSOC_USP_CS_HIGH_VALID;
+	}
+	if (!(spi->mode & SPI_LSB_FIRST)) {
+		regval |= SIRFSOC_SPI_TRAN_MSB;
+		usp_mode1 &= ~SIRFSOC_USP_LSB;
+	} else {
+		regval &= ~SIRFSOC_SPI_TRAN_MSB;
+		usp_mode1 |= SIRFSOC_USP_LSB;
+	}
+	if (spi->mode & SPI_CPOL) {
+		regval |= SIRFSOC_SPI_CLK_IDLE_STAT;
+		usp_mode1 |= SIRFSOC_USP_SCLK_IDLE_STAT;
+	} else {
+		regval &= ~SIRFSOC_SPI_CLK_IDLE_STAT;
+		usp_mode1 &= ~SIRFSOC_USP_SCLK_IDLE_STAT;
+	}
+	/*
+	 * Data should be driven at least 1/2 cycle before the fetch edge
+	 * to make sure that data gets stable at the fetch edge.
+	 */
+	if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) ||
+	    (!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA))) {
+		regval &= ~SIRFSOC_SPI_DRV_POS_EDGE;
+		usp_mode1 |= (SIRFSOC_USP_TXD_FALLING_EDGE |
+				SIRFSOC_USP_RXD_FALLING_EDGE);
+	} else {
+		regval |= SIRFSOC_SPI_DRV_POS_EDGE;
+		usp_mode1 &= ~(SIRFSOC_USP_RXD_FALLING_EDGE |
+				SIRFSOC_USP_TXD_FALLING_EDGE);
+	}
+	writel((SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size - 2) <<
+		SIRFSOC_SPI_FIFO_SC_OFFSET) |
+		(SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size / 2) <<
+		SIRFSOC_SPI_FIFO_LC_OFFSET) |
+		(SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, 2) <<
+		SIRFSOC_SPI_FIFO_HC_OFFSET),
+		sspi->base + sspi->regs->txfifo_level_chk);
+	writel((SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, 2) <<
+		SIRFSOC_SPI_FIFO_SC_OFFSET) |
+		(SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size / 2) <<
+		SIRFSOC_SPI_FIFO_LC_OFFSET) |
+		(SIRFSOC_SPI_FIFO_LEVEL_CHK_MASK(sspi, sspi->fifo_size - 2) <<
+		SIRFSOC_SPI_FIFO_HC_OFFSET),
+		sspi->base + sspi->regs->rxfifo_level_chk);
+	/*
+	 * it should never set to hardware cs mode because in hardware cs mode,
+	 * cs signal can't controlled by driver.
+	 */
+	switch (sspi->type) {
+	case SIRF_REAL_SPI:
+		regval |= SIRFSOC_SPI_CS_IO_MODE;
+		writel(regval, sspi->base + sspi->regs->spi_ctrl);
+		break;
+	case SIRF_USP_SPI_P2:
+	case SIRF_USP_SPI_A7:
+		usp_mode1 |= SIRFSOC_USP_SYNC_MODE;
+		usp_mode1 |= SIRFSOC_USP_TFS_IO_MODE;
+		usp_mode1 &= ~SIRFSOC_USP_TFS_IO_INPUT;
+		writel(usp_mode1, sspi->base + sspi->regs->usp_mode1);
+		break;
+	}
+
+	return 0;
+}
+
 static int
 spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 {
 	struct sirfsoc_spi *sspi;
 	u8 bits_per_word = 0;
 	int hz = 0;
-	u32 regval;
-	u32 txfifo_ctrl, rxfifo_ctrl;
-	u32 fifo_size = SIRFSOC_SPI_FIFO_SIZE / 4;
+	u32 regval, txfifo_ctrl, rxfifo_ctrl, tx_frm_ctl, rx_frm_ctl, usp_mode2;
 
 	sspi = spi_master_get_devdata(spi->master);
 
 	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
 	hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz;
 
-	regval = (sspi->ctrl_freq / (2 * hz)) - 1;
+	usp_mode2 = regval = (sspi->ctrl_freq / (2 * hz)) - 1;
 	if (regval > 0xFFFF || regval < 0) {
 		dev_err(&spi->dev, "Speed %d not supported\n", hz);
 		return -EINVAL;
 	}
-
 	switch (bits_per_word) {
 	case 8:
 		regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_8;
@@ -559,94 +905,177 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 		sspi->tx_word = spi_sirfsoc_tx_word_u32;
 		break;
 	default:
-		BUG();
+		dev_err(&spi->dev, "bpw %d not supported\n", bits_per_word);
+		return -EINVAL;
 	}
-
 	sspi->word_width = DIV_ROUND_UP(bits_per_word, 8);
-	txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
-					   (sspi->word_width >> 1);
-	rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
-					   (sspi->word_width >> 1);
-
-	if (!(spi->mode & SPI_CS_HIGH))
-		regval |= SIRFSOC_SPI_CS_IDLE_STAT;
-	if (!(spi->mode & SPI_LSB_FIRST))
-		regval |= SIRFSOC_SPI_TRAN_MSB;
-	if (spi->mode & SPI_CPOL)
-		regval |= SIRFSOC_SPI_CLK_IDLE_STAT;
-
-	/*
-	 * Data should be driven at least 1/2 cycle before the fetch edge
-	 * to make sure that data gets stable at the fetch edge.
-	 */
-	if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) ||
-	    (!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA)))
-		regval &= ~SIRFSOC_SPI_DRV_POS_EDGE;
-	else
-		regval |= SIRFSOC_SPI_DRV_POS_EDGE;
-
-	writel(SIRFSOC_SPI_FIFO_SC(fifo_size - 2) |
-			SIRFSOC_SPI_FIFO_LC(fifo_size / 2) |
-			SIRFSOC_SPI_FIFO_HC(2),
-		sspi->base + SIRFSOC_SPI_TXFIFO_LEVEL_CHK);
-	writel(SIRFSOC_SPI_FIFO_SC(2) |
-			SIRFSOC_SPI_FIFO_LC(fifo_size / 2) |
-			SIRFSOC_SPI_FIFO_HC(fifo_size - 2),
-		sspi->base + SIRFSOC_SPI_RXFIFO_LEVEL_CHK);
-	writel(txfifo_ctrl, sspi->base + SIRFSOC_SPI_TXFIFO_CTRL);
-	writel(rxfifo_ctrl, sspi->base + SIRFSOC_SPI_RXFIFO_CTRL);
-
-	if (t && t->tx_buf && !t->rx_buf && (t->len <= SIRFSOC_MAX_CMD_BYTES)) {
-		regval |= (SIRFSOC_SPI_CMD_BYTE_NUM((t->len - 1)) |
-				SIRFSOC_SPI_CMD_MODE);
-		sspi->tx_by_cmd = true;
-	} else {
-		regval &= ~SIRFSOC_SPI_CMD_MODE;
-		sspi->tx_by_cmd = false;
+	txfifo_ctrl = (((sspi->fifo_size / 2) &
+			SIRFSOC_SPI_FIFO_THD_MASK(sspi))
+			<< SIRFSOC_SPI_FIFO_THD_OFFSET) |
+			(sspi->word_width >> 1);
+	rxfifo_ctrl = (((sspi->fifo_size / 2) &
+			SIRFSOC_SPI_FIFO_THD_MASK(sspi))
+			<< SIRFSOC_SPI_FIFO_THD_OFFSET) |
+			(sspi->word_width >> 1);
+	writel(txfifo_ctrl, sspi->base + sspi->regs->txfifo_ctrl);
+	writel(rxfifo_ctrl, sspi->base + sspi->regs->rxfifo_ctrl);
+	if (sspi->type == SIRF_USP_SPI_P2 ||
+		sspi->type == SIRF_USP_SPI_A7) {
+		tx_frm_ctl = 0;
+		tx_frm_ctl |= ((bits_per_word - 1) & SIRFSOC_USP_TX_DATA_MASK)
+				<< SIRFSOC_USP_TX_DATA_OFFSET;
+		tx_frm_ctl |= ((bits_per_word + 1 + SIRFSOC_USP_TXD_DELAY_LEN
+				- 1) & SIRFSOC_USP_TX_SYNC_MASK) <<
+				SIRFSOC_USP_TX_SYNC_OFFSET;
+		tx_frm_ctl |= ((bits_per_word + 1 + SIRFSOC_USP_TXD_DELAY_LEN
+				+ 2 - 1) & SIRFSOC_USP_TX_FRAME_MASK) <<
+				SIRFSOC_USP_TX_FRAME_OFFSET;
+		tx_frm_ctl |= ((bits_per_word - 1) &
+				SIRFSOC_USP_TX_SHIFTER_MASK) <<
+				SIRFSOC_USP_TX_SHIFTER_OFFSET;
+		rx_frm_ctl = 0;
+		rx_frm_ctl |= ((bits_per_word - 1) & SIRFSOC_USP_RX_DATA_MASK)
+				<< SIRFSOC_USP_RX_DATA_OFFSET;
+		rx_frm_ctl |= ((bits_per_word + 1 + SIRFSOC_USP_RXD_DELAY_LEN
+				+ 2 - 1) & SIRFSOC_USP_RX_FRAME_MASK) <<
+				SIRFSOC_USP_RX_FRAME_OFFSET;
+		rx_frm_ctl |= ((bits_per_word - 1)
+				& SIRFSOC_USP_RX_SHIFTER_MASK) <<
+				SIRFSOC_USP_RX_SHIFTER_OFFSET;
+		writel(tx_frm_ctl | (((usp_mode2 >> 10) &
+			SIRFSOC_USP_CLK_10_11_MASK) <<
+			SIRFSOC_USP_CLK_10_11_OFFSET),
+			sspi->base + sspi->regs->usp_tx_frame_ctrl);
+		writel(rx_frm_ctl | (((usp_mode2 >> 12) &
+			SIRFSOC_USP_CLK_12_15_MASK) <<
+			SIRFSOC_USP_CLK_12_15_OFFSET),
+			sspi->base + sspi->regs->usp_rx_frame_ctrl);
+		writel(readl(sspi->base + sspi->regs->usp_mode2) |
+			((usp_mode2 & SIRFSOC_USP_CLK_DIVISOR_MASK) <<
+			SIRFSOC_USP_CLK_DIVISOR_OFFSET) |
+			(SIRFSOC_USP_RXD_DELAY_LEN <<
+			 SIRFSOC_USP_RXD_DELAY_OFFSET) |
+			(SIRFSOC_USP_TXD_DELAY_LEN <<
+			 SIRFSOC_USP_TXD_DELAY_OFFSET),
+			sspi->base + sspi->regs->usp_mode2);
+	}
+	if (sspi->type == SIRF_REAL_SPI)
+		writel(regval, sspi->base + sspi->regs->spi_ctrl);
+	spi_sirfsoc_config_mode(spi);
+	if (sspi->type == SIRF_REAL_SPI) {
+		if (t && t->tx_buf && !t->rx_buf &&
+			(t->len <= SIRFSOC_MAX_CMD_BYTES)) {
+			sspi->tx_by_cmd = true;
+			writel(readl(sspi->base + sspi->regs->spi_ctrl) |
+				(SIRFSOC_SPI_CMD_BYTE_NUM((t->len - 1)) |
+				SIRFSOC_SPI_CMD_MODE),
+				sspi->base + sspi->regs->spi_ctrl);
+		} else {
+			sspi->tx_by_cmd = false;
+			writel(readl(sspi->base + sspi->regs->spi_ctrl) &
+				~SIRFSOC_SPI_CMD_MODE,
+				sspi->base + sspi->regs->spi_ctrl);
+		}
 	}
-	/*
-	 * it should never set to hardware cs mode because in hardware cs mode,
-	 * cs signal can't controlled by driver.
-	 */
-	regval |= SIRFSOC_SPI_CS_IO_MODE;
-	writel(regval, sspi->base + SIRFSOC_SPI_CTRL);
-
 	if (IS_DMA_VALID(t)) {
 		/* Enable DMA mode for RX, TX */
-		writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
+		writel(0, sspi->base + sspi->regs->tx_dma_io_ctrl);
 		writel(SIRFSOC_SPI_RX_DMA_FLUSH,
-			sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
+			sspi->base + sspi->regs->rx_dma_io_ctrl);
 	} else {
 		/* Enable IO mode for RX, TX */
 		writel(SIRFSOC_SPI_IO_MODE_SEL,
-			sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL);
+			sspi->base + sspi->regs->tx_dma_io_ctrl);
 		writel(SIRFSOC_SPI_IO_MODE_SEL,
-			sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL);
+			sspi->base + sspi->regs->rx_dma_io_ctrl);
 	}
-
 	return 0;
 }
 
 static int spi_sirfsoc_setup(struct spi_device *spi)
 {
 	struct sirfsoc_spi *sspi;
+	int ret = 0;
 
 	sspi = spi_master_get_devdata(spi->master);
-
 	if (spi->cs_gpio == -ENOENT)
 		sspi->hw_cs = true;
-	else
+	else {
 		sspi->hw_cs = false;
-	return spi_sirfsoc_setup_transfer(spi, NULL);
+		if (!spi_get_ctldata(spi)) {
+			void *cs = kmalloc(sizeof(int), GFP_KERNEL);
+			if (!cs) {
+				ret = -ENOMEM;
+				goto exit;
+			}
+			ret = gpio_is_valid(spi->cs_gpio);
+			if (!ret) {
+				dev_err(&spi->dev, "no valid gpio\n");
+				ret = -ENOENT;
+				goto exit;
+			}
+			ret = gpio_request(spi->cs_gpio, DRIVER_NAME);
+			if (ret) {
+				dev_err(&spi->dev, "failed to request gpio\n");
+				goto exit;
+			}
+			spi_set_ctldata(spi, cs);
+		}
+	}
+	spi_sirfsoc_config_mode(spi);
+	spi_sirfsoc_chipselect(spi, BITBANG_CS_INACTIVE);
+exit:
+	return ret;
+}
+
+static void spi_sirfsoc_cleanup(struct spi_device *spi)
+{
+	if (spi_get_ctldata(spi)) {
+		gpio_free(spi->cs_gpio);
+		kfree(spi_get_ctldata(spi));
+	}
 }
 
+static const struct sirf_spi_comp_data sirf_real_spi = {
+	.regs = &real_spi_register,
+	.type = SIRF_REAL_SPI,
+	.dat_max_frm_len = 64 * 1024,
+	.fifo_size = 256,
+};
+
+static const struct sirf_spi_comp_data sirf_usp_spi_p2 = {
+	.regs = &usp_spi_register,
+	.type = SIRF_USP_SPI_P2,
+	.dat_max_frm_len = 1024 * 1024,
+	.fifo_size = 128,
+	.hwinit = sirfsoc_usp_hwinit,
+};
+
+static const struct sirf_spi_comp_data sirf_usp_spi_a7 = {
+	.regs = &usp_spi_register,
+	.type = SIRF_USP_SPI_A7,
+	.dat_max_frm_len = 1024 * 1024,
+	.fifo_size = 512,
+	.hwinit = sirfsoc_usp_hwinit,
+};
+
+static const struct of_device_id spi_sirfsoc_of_match[] = {
+	{ .compatible = "sirf,prima2-spi", .data = &sirf_real_spi},
+	{ .compatible = "sirf,prima2-usp-spi", .data = &sirf_usp_spi_p2},
+	{ .compatible = "sirf,atlas7-usp-spi", .data = &sirf_usp_spi_a7},
+	{}
+};
+MODULE_DEVICE_TABLE(of, spi_sirfsoc_of_match);
+
 static int spi_sirfsoc_probe(struct platform_device *pdev)
 {
 	struct sirfsoc_spi *sspi;
 	struct spi_master *master;
 	struct resource *mem_res;
+	struct sirf_spi_comp_data *spi_comp_data;
 	int irq;
-	int i, ret;
+	int ret;
+	const struct of_device_id *match;
 
 	ret = device_reset(&pdev->dev);
 	if (ret) {
@@ -659,16 +1088,22 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Unable to allocate SPI master\n");
 		return -ENOMEM;
 	}
+	match = of_match_node(spi_sirfsoc_of_match, pdev->dev.of_node);
 	platform_set_drvdata(pdev, master);
 	sspi = spi_master_get_devdata(master);
-
+	sspi->fifo_full_offset = ilog2(sspi->fifo_size);
+	spi_comp_data = (struct sirf_spi_comp_data *)match->data;
+	sspi->regs = spi_comp_data->regs;
+	sspi->type = spi_comp_data->type;
+	sspi->fifo_level_chk_mask = (sspi->fifo_size / 4) - 1;
+	sspi->dat_max_frm_len = spi_comp_data->dat_max_frm_len;
+	sspi->fifo_size = spi_comp_data->fifo_size;
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	sspi->base = devm_ioremap_resource(&pdev->dev, mem_res);
 	if (IS_ERR(sspi->base)) {
 		ret = PTR_ERR(sspi->base);
 		goto free_master;
 	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = -ENXIO;
@@ -684,11 +1119,13 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
 	sspi->bitbang.setup_transfer = spi_sirfsoc_setup_transfer;
 	sspi->bitbang.txrx_bufs = spi_sirfsoc_transfer;
 	sspi->bitbang.master->setup = spi_sirfsoc_setup;
+	sspi->bitbang.master->cleanup = spi_sirfsoc_cleanup;
 	master->bus_num = pdev->id;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH;
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(12) |
 					SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
 	master->max_speed_hz = SIRFSOC_SPI_DEFAULT_FRQ;
+	master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
 	sspi->bitbang.master->dev.of_node = pdev->dev.of_node;
 
 	/* request DMA channels */
@@ -711,47 +1148,19 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
 		goto free_tx_dma;
 	}
 	clk_prepare_enable(sspi->clk);
+	if (spi_comp_data->hwinit)
+		spi_comp_data->hwinit(sspi);
 	sspi->ctrl_freq = clk_get_rate(sspi->clk);
 
 	init_completion(&sspi->rx_done);
 	init_completion(&sspi->tx_done);
 
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	/* We are not using dummy delay between command and data */
-	writel(0, sspi->base + SIRFSOC_SPI_DUMMY_DELAY_CTL);
-
-	sspi->dummypage = kmalloc(2 * PAGE_SIZE, GFP_KERNEL);
-	if (!sspi->dummypage) {
-		ret = -ENOMEM;
-		goto free_clk;
-	}
-
 	ret = spi_bitbang_start(&sspi->bitbang);
 	if (ret)
-		goto free_dummypage;
-	for (i = 0; master->cs_gpios && i < master->num_chipselect; i++) {
-		if (master->cs_gpios[i] == -ENOENT)
-			continue;
-		if (!gpio_is_valid(master->cs_gpios[i])) {
-			dev_err(&pdev->dev, "no valid gpio\n");
-			ret = -EINVAL;
-			goto free_dummypage;
-		}
-		ret = devm_gpio_request(&pdev->dev,
-				master->cs_gpios[i], DRIVER_NAME);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to request gpio\n");
-			goto free_dummypage;
-		}
-	}
+		goto free_clk;
 	dev_info(&pdev->dev, "registerred, bus number = %d\n", master->bus_num);
 
 	return 0;
-free_dummypage:
-	kfree(sspi->dummypage);
 free_clk:
 	clk_disable_unprepare(sspi->clk);
 	clk_put(sspi->clk);
@@ -772,9 +1181,7 @@ static int  spi_sirfsoc_remove(struct platform_device *pdev)
 
 	master = platform_get_drvdata(pdev);
 	sspi = spi_master_get_devdata(master);
-
 	spi_bitbang_stop(&sspi->bitbang);
-	kfree(sspi->dummypage);
 	clk_disable_unprepare(sspi->clk);
 	clk_put(sspi->clk);
 	dma_release_channel(sspi->rx_chan);
@@ -804,24 +1211,17 @@ static int spi_sirfsoc_resume(struct device *dev)
 	struct sirfsoc_spi *sspi = spi_master_get_devdata(master);
 
 	clk_enable(sspi->clk);
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP);
-	writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP);
-
-	return spi_master_resume(master);
+	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->txfifo_op);
+	writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + sspi->regs->rxfifo_op);
+	writel(SIRFSOC_SPI_FIFO_START, sspi->base + sspi->regs->txfifo_op);
+	writel(SIRFSOC_SPI_FIFO_START, sspi->base + sspi->regs->rxfifo_op);
+	return 0;
 }
 #endif
 
 static SIMPLE_DEV_PM_OPS(spi_sirfsoc_pm_ops, spi_sirfsoc_suspend,
 			 spi_sirfsoc_resume);
 
-static const struct of_device_id spi_sirfsoc_of_match[] = {
-	{ .compatible = "sirf,prima2-spi", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, spi_sirfsoc_of_match);
-
 static struct platform_driver spi_sirfsoc_driver = {
 	.driver = {
 		.name = DRIVER_NAME,
@@ -835,4 +1235,5 @@ module_platform_driver(spi_sirfsoc_driver);
 MODULE_DESCRIPTION("SiRF SoC SPI master driver");
 MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>");
 MODULE_AUTHOR("Barry Song <Baohua.Song@csr.com>");
+MODULE_AUTHOR("Qipan Li <Qipan.Li@csr.com>");
 MODULE_LICENSE("GPL v2");

drivers/spi/spi-zynqmp-gqspi.c

@@ -0,0 +1,1122 @@
+/*
+ * Xilinx Zynq UltraScale+ MPSoC Quad-SPI (QSPI) controller driver
+ * (master mode only)
+ *
+ * Copyright (C) 2009 - 2015 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+/* Generic QSPI register offsets */
+#define GQSPI_CONFIG_OFST		0x00000100
+#define GQSPI_ISR_OFST			0x00000104
+#define GQSPI_IDR_OFST			0x0000010C
+#define GQSPI_IER_OFST			0x00000108
+#define GQSPI_IMASK_OFST		0x00000110
+#define GQSPI_EN_OFST			0x00000114
+#define GQSPI_TXD_OFST			0x0000011C
+#define GQSPI_RXD_OFST			0x00000120
+#define GQSPI_TX_THRESHOLD_OFST		0x00000128
+#define GQSPI_RX_THRESHOLD_OFST		0x0000012C
+#define GQSPI_LPBK_DLY_ADJ_OFST		0x00000138
+#define GQSPI_GEN_FIFO_OFST		0x00000140
+#define GQSPI_SEL_OFST			0x00000144
+#define GQSPI_GF_THRESHOLD_OFST		0x00000150
+#define GQSPI_FIFO_CTRL_OFST		0x0000014C
+#define GQSPI_QSPIDMA_DST_CTRL_OFST	0x0000080C
+#define GQSPI_QSPIDMA_DST_SIZE_OFST	0x00000804
+#define GQSPI_QSPIDMA_DST_STS_OFST	0x00000808
+#define GQSPI_QSPIDMA_DST_I_STS_OFST	0x00000814
+#define GQSPI_QSPIDMA_DST_I_EN_OFST	0x00000818
+#define GQSPI_QSPIDMA_DST_I_DIS_OFST	0x0000081C
+#define GQSPI_QSPIDMA_DST_I_MASK_OFST	0x00000820
+#define GQSPI_QSPIDMA_DST_ADDR_OFST	0x00000800
+#define GQSPI_QSPIDMA_DST_ADDR_MSB_OFST 0x00000828
+
+/* GQSPI register bit masks */
+#define GQSPI_SEL_MASK				0x00000001
+#define GQSPI_EN_MASK				0x00000001
+#define GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK	0x00000020
+#define GQSPI_ISR_WR_TO_CLR_MASK		0x00000002
+#define GQSPI_IDR_ALL_MASK			0x00000FBE
+#define GQSPI_CFG_MODE_EN_MASK			0xC0000000
+#define GQSPI_CFG_GEN_FIFO_START_MODE_MASK	0x20000000
+#define GQSPI_CFG_ENDIAN_MASK			0x04000000
+#define GQSPI_CFG_EN_POLL_TO_MASK		0x00100000
+#define GQSPI_CFG_WP_HOLD_MASK			0x00080000
+#define GQSPI_CFG_BAUD_RATE_DIV_MASK		0x00000038
+#define GQSPI_CFG_CLK_PHA_MASK			0x00000004
+#define GQSPI_CFG_CLK_POL_MASK			0x00000002
+#define GQSPI_CFG_START_GEN_FIFO_MASK		0x10000000
+#define GQSPI_GENFIFO_IMM_DATA_MASK		0x000000FF
+#define GQSPI_GENFIFO_DATA_XFER			0x00000100
+#define GQSPI_GENFIFO_EXP			0x00000200
+#define GQSPI_GENFIFO_MODE_SPI			0x00000400
+#define GQSPI_GENFIFO_MODE_DUALSPI		0x00000800
+#define GQSPI_GENFIFO_MODE_QUADSPI		0x00000C00
+#define GQSPI_GENFIFO_MODE_MASK			0x00000C00
+#define GQSPI_GENFIFO_CS_LOWER			0x00001000
+#define GQSPI_GENFIFO_CS_UPPER			0x00002000
+#define GQSPI_GENFIFO_BUS_LOWER			0x00004000
+#define GQSPI_GENFIFO_BUS_UPPER			0x00008000
+#define GQSPI_GENFIFO_BUS_BOTH			0x0000C000
+#define GQSPI_GENFIFO_BUS_MASK			0x0000C000
+#define GQSPI_GENFIFO_TX			0x00010000
+#define GQSPI_GENFIFO_RX			0x00020000
+#define GQSPI_GENFIFO_STRIPE			0x00040000
+#define GQSPI_GENFIFO_POLL			0x00080000
+#define GQSPI_GENFIFO_EXP_START			0x00000100
+#define GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK	0x00000004
+#define GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK	0x00000002
+#define GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK	0x00000001
+#define GQSPI_ISR_RXEMPTY_MASK			0x00000800
+#define GQSPI_ISR_GENFIFOFULL_MASK		0x00000400
+#define GQSPI_ISR_GENFIFONOT_FULL_MASK		0x00000200
+#define GQSPI_ISR_TXEMPTY_MASK			0x00000100
+#define GQSPI_ISR_GENFIFOEMPTY_MASK		0x00000080
+#define GQSPI_ISR_RXFULL_MASK			0x00000020
+#define GQSPI_ISR_RXNEMPTY_MASK			0x00000010
+#define GQSPI_ISR_TXFULL_MASK			0x00000008
+#define GQSPI_ISR_TXNOT_FULL_MASK		0x00000004
+#define GQSPI_ISR_POLL_TIME_EXPIRE_MASK		0x00000002
+#define GQSPI_IER_TXNOT_FULL_MASK		0x00000004
+#define GQSPI_IER_RXEMPTY_MASK			0x00000800
+#define GQSPI_IER_POLL_TIME_EXPIRE_MASK		0x00000002
+#define GQSPI_IER_RXNEMPTY_MASK			0x00000010
+#define GQSPI_IER_GENFIFOEMPTY_MASK		0x00000080
+#define GQSPI_IER_TXEMPTY_MASK			0x00000100
+#define GQSPI_QSPIDMA_DST_INTR_ALL_MASK		0x000000FE
+#define GQSPI_QSPIDMA_DST_STS_WTC		0x0000E000
+#define GQSPI_CFG_MODE_EN_DMA_MASK		0x80000000
+#define GQSPI_ISR_IDR_MASK			0x00000994
+#define GQSPI_QSPIDMA_DST_I_EN_DONE_MASK	0x00000002
+#define GQSPI_QSPIDMA_DST_I_STS_DONE_MASK	0x00000002
+#define GQSPI_IRQ_MASK				0x00000980
+
+#define GQSPI_CFG_BAUD_RATE_DIV_SHIFT		3
+#define GQSPI_GENFIFO_CS_SETUP			0x4
+#define GQSPI_GENFIFO_CS_HOLD			0x3
+#define GQSPI_TXD_DEPTH				64
+#define GQSPI_RX_FIFO_THRESHOLD			32
+#define GQSPI_RX_FIFO_FILL	(GQSPI_RX_FIFO_THRESHOLD * 4)
+#define GQSPI_TX_FIFO_THRESHOLD_RESET_VAL	32
+#define GQSPI_TX_FIFO_FILL	(GQSPI_TXD_DEPTH -\
+				GQSPI_TX_FIFO_THRESHOLD_RESET_VAL)
+#define GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL	0X10
+#define GQSPI_QSPIDMA_DST_CTRL_RESET_VAL	0x803FFA00
+#define GQSPI_SELECT_FLASH_CS_LOWER		0x1
+#define GQSPI_SELECT_FLASH_CS_UPPER		0x2
+#define GQSPI_SELECT_FLASH_CS_BOTH		0x3
+#define GQSPI_SELECT_FLASH_BUS_LOWER		0x1
+#define GQSPI_SELECT_FLASH_BUS_UPPER		0x2
+#define GQSPI_SELECT_FLASH_BUS_BOTH		0x3
+#define GQSPI_BAUD_DIV_MAX	7	/* Baud rate divisor maximum */
+#define GQSPI_BAUD_DIV_SHIFT	2	/* Baud rate divisor shift */
+#define GQSPI_SELECT_MODE_SPI		0x1
+#define GQSPI_SELECT_MODE_DUALSPI	0x2
+#define GQSPI_SELECT_MODE_QUADSPI	0x4
+#define GQSPI_DMA_UNALIGN		0x3
+#define GQSPI_DEFAULT_NUM_CS	1	/* Default number of chip selects */
+
+enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
+
+/**
+ * struct zynqmp_qspi - Defines qspi driver instance
+ * @regs:		Virtual address of the QSPI controller registers
+ * @refclk:		Pointer to the peripheral clock
+ * @pclk:		Pointer to the APB clock
+ * @irq:		IRQ number
+ * @dev:		Pointer to struct device
+ * @txbuf:		Pointer to the TX buffer
+ * @rxbuf:		Pointer to the RX buffer
+ * @bytes_to_transfer:	Number of bytes left to transfer
+ * @bytes_to_receive:	Number of bytes left to receive
+ * @genfifocs:		Used for chip select
+ * @genfifobus:		Used to select the upper or lower bus
+ * @dma_rx_bytes:	Remaining bytes to receive by DMA mode
+ * @dma_addr:		DMA address after mapping the kernel buffer
+ * @genfifoentry:	Used for storing the genfifoentry instruction.
+ * @mode:		Defines the mode in which QSPI is operating
+ */
+struct zynqmp_qspi {
+	void __iomem *regs;
+	struct clk *refclk;
+	struct clk *pclk;
+	int irq;
+	struct device *dev;
+	const void *txbuf;
+	void *rxbuf;
+	int bytes_to_transfer;
+	int bytes_to_receive;
+	u32 genfifocs;
+	u32 genfifobus;
+	u32 dma_rx_bytes;
+	dma_addr_t dma_addr;
+	u32 genfifoentry;
+	enum mode_type mode;
+};
+
+/**
+ * zynqmp_gqspi_read:	For GQSPI controller read operation
+ * @xqspi:	Pointer to the zynqmp_qspi structure
+ * @offset:	Offset from where to read
+ */
+static u32 zynqmp_gqspi_read(struct zynqmp_qspi *xqspi, u32 offset)
+{
+	return readl_relaxed(xqspi->regs + offset);
+}
+
+/**
+ * zynqmp_gqspi_write:	For GQSPI controller write operation
+ * @xqspi:	Pointer to the zynqmp_qspi structure
+ * @offset:	Offset where to write
+ * @val:	Value to be written
+ */
+static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset,
+				      u32 val)
+{
+	writel_relaxed(val, (xqspi->regs + offset));
+}
+
+/**
+ * zynqmp_gqspi_selectslave:	For selection of slave device
+ * @instanceptr:	Pointer to the zynqmp_qspi structure
+ * @flashcs:	For chip select
+ * @flashbus:	To check which bus is selected- upper or lower
+ */
+static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr,
+				     u8 slavecs, u8 slavebus)
+{
+	/*
+	 * Bus and CS lines selected here will be updated in the instance and
+	 * used for subsequent GENFIFO entries during transfer.
+	 */
+
+	/* Choose slave select line */
+	switch (slavecs) {
+	case GQSPI_SELECT_FLASH_CS_BOTH:
+		instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER |
+			GQSPI_GENFIFO_CS_UPPER;
+	case GQSPI_SELECT_FLASH_CS_UPPER:
+		instanceptr->genfifocs = GQSPI_GENFIFO_CS_UPPER;
+		break;
+	case GQSPI_SELECT_FLASH_CS_LOWER:
+		instanceptr->genfifocs = GQSPI_GENFIFO_CS_LOWER;
+		break;
+	default:
+		dev_warn(instanceptr->dev, "Invalid slave select\n");
+	}
+
+	/* Choose the bus */
+	switch (slavebus) {
+	case GQSPI_SELECT_FLASH_BUS_BOTH:
+		instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER |
+			GQSPI_GENFIFO_BUS_UPPER;
+		break;
+	case GQSPI_SELECT_FLASH_BUS_UPPER:
+		instanceptr->genfifobus = GQSPI_GENFIFO_BUS_UPPER;
+		break;
+	case GQSPI_SELECT_FLASH_BUS_LOWER:
+		instanceptr->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
+		break;
+	default:
+		dev_warn(instanceptr->dev, "Invalid slave bus\n");
+	}
+}
+
+/**
+ * zynqmp_qspi_init_hw:	Initialize the hardware
+ * @xqspi:	Pointer to the zynqmp_qspi structure
+ *
+ * The default settings of the QSPI controller's configurable parameters on
+ * reset are
+ *	- Master mode
+ *	- TX threshold set to 1
+ *	- RX threshold set to 1
+ *	- Flash memory interface mode enabled
+ * This function performs the following actions
+ *	- Disable and clear all the interrupts
+ *	- Enable manual slave select
+ *	- Enable manual start
+ *	- Deselect all the chip select lines
+ *	- Set the little endian mode of TX FIFO and
+ *	- Enable the QSPI controller
+ */
+static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi)
+{
+	u32 config_reg;
+
+	/* Select the GQSPI mode */
+	zynqmp_gqspi_write(xqspi, GQSPI_SEL_OFST, GQSPI_SEL_MASK);
+	/* Clear and disable interrupts */
+	zynqmp_gqspi_write(xqspi, GQSPI_ISR_OFST,
+			   zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST) |
+			   GQSPI_ISR_WR_TO_CLR_MASK);
+	/* Clear the DMA STS */
+	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST,
+			   zynqmp_gqspi_read(xqspi,
+					     GQSPI_QSPIDMA_DST_I_STS_OFST));
+	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_STS_OFST,
+			   zynqmp_gqspi_read(xqspi,
+					     GQSPI_QSPIDMA_DST_STS_OFST) |
+					     GQSPI_QSPIDMA_DST_STS_WTC);
+	zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_IDR_ALL_MASK);
+	zynqmp_gqspi_write(xqspi,
+			   GQSPI_QSPIDMA_DST_I_DIS_OFST,
+			   GQSPI_QSPIDMA_DST_INTR_ALL_MASK);
+	/* Disable the GQSPI */
+	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+	config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+	config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+	/* Manual start */
+	config_reg |= GQSPI_CFG_GEN_FIFO_START_MODE_MASK;
+	/* Little endian by default */
+	config_reg &= ~GQSPI_CFG_ENDIAN_MASK;
+	/* Disable poll time out */
+	config_reg &= ~GQSPI_CFG_EN_POLL_TO_MASK;
+	/* Set hold bit */
+	config_reg |= GQSPI_CFG_WP_HOLD_MASK;
+	/* Clear pre-scalar by default */
+	config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK;
+	/* CPHA 0 */
+	config_reg &= ~GQSPI_CFG_CLK_PHA_MASK;
+	/* CPOL 0 */
+	config_reg &= ~GQSPI_CFG_CLK_POL_MASK;
+	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+
+	/* Clear the TX and RX FIFO */
+	zynqmp_gqspi_write(xqspi, GQSPI_FIFO_CTRL_OFST,
+			   GQSPI_FIFO_CTRL_RST_RX_FIFO_MASK |
+			   GQSPI_FIFO_CTRL_RST_TX_FIFO_MASK |
+			   GQSPI_FIFO_CTRL_RST_GEN_FIFO_MASK);
+	/* Set by default to allow for high frequencies */
+	zynqmp_gqspi_write(xqspi, GQSPI_LPBK_DLY_ADJ_OFST,
+			   zynqmp_gqspi_read(xqspi, GQSPI_LPBK_DLY_ADJ_OFST) |
+			   GQSPI_LPBK_DLY_ADJ_USE_LPBK_MASK);
+	/* Reset thresholds */
+	zynqmp_gqspi_write(xqspi, GQSPI_TX_THRESHOLD_OFST,
+			   GQSPI_TX_FIFO_THRESHOLD_RESET_VAL);
+	zynqmp_gqspi_write(xqspi, GQSPI_RX_THRESHOLD_OFST,
+			   GQSPI_RX_FIFO_THRESHOLD);
+	zynqmp_gqspi_write(xqspi, GQSPI_GF_THRESHOLD_OFST,
+			   GQSPI_GEN_FIFO_THRESHOLD_RESET_VAL);
+	zynqmp_gqspi_selectslave(xqspi,
+				 GQSPI_SELECT_FLASH_CS_LOWER,
+				 GQSPI_SELECT_FLASH_BUS_LOWER);
+	/* Initialize DMA */
+	zynqmp_gqspi_write(xqspi,
+			GQSPI_QSPIDMA_DST_CTRL_OFST,
+			GQSPI_QSPIDMA_DST_CTRL_RESET_VAL);
+
+	/* Enable the GQSPI */
+	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
+}
+
+/**
+ * zynqmp_qspi_copy_read_data:	Copy data to RX buffer
+ * @xqspi:	Pointer to the zynqmp_qspi structure
+ * @data:	The variable where data is stored
+ * @size:	Number of bytes to be copied from data to RX buffer
+ */
+static void zynqmp_qspi_copy_read_data(struct zynqmp_qspi *xqspi,
+				       ulong data, u8 size)
+{
+	memcpy(xqspi->rxbuf, &data, size);
+	xqspi->rxbuf += size;
+	xqspi->bytes_to_receive -= size;
+}
+
+/**
+ * zynqmp_prepare_transfer_hardware:	Prepares hardware for transfer.
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ *
+ * This function enables SPI master controller.
+ *
+ * Return:	0 on success; error value otherwise
+ */
+static int zynqmp_prepare_transfer_hardware(struct spi_master *master)
+{
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = clk_enable(xqspi->refclk);
+	if (ret)
+		goto clk_err;
+
+	ret = clk_enable(xqspi->pclk);
+	if (ret)
+		goto clk_err;
+
+	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
+	return 0;
+clk_err:
+	return ret;
+}
+
+/**
+ * zynqmp_unprepare_transfer_hardware:	Relaxes hardware after transfer
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ *
+ * This function disables the SPI master controller.
+ *
+ * Return:	Always 0
+ */
+static int zynqmp_unprepare_transfer_hardware(struct spi_master *master)
+{
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+
+	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+	clk_disable(xqspi->refclk);
+	clk_disable(xqspi->pclk);
+	return 0;
+}
+
+/**
+ * zynqmp_qspi_chipselect:	Select or deselect the chip select line
+ * @qspi:	Pointer to the spi_device structure
+ * @is_high:	Select(0) or deselect (1) the chip select line
+ */
+static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
+{
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
+	ulong timeout;
+	u32 genfifoentry = 0x0, statusreg;
+
+	genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
+	genfifoentry |= xqspi->genfifobus;
+
+	if (!is_high) {
+		genfifoentry |= xqspi->genfifocs;
+		genfifoentry |= GQSPI_GENFIFO_CS_SETUP;
+	} else {
+		genfifoentry |= GQSPI_GENFIFO_CS_HOLD;
+	}
+
+	zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+
+	/* Dummy generic FIFO entry */
+	zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+
+	/* Manually start the generic FIFO command */
+	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+			zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+			GQSPI_CFG_START_GEN_FIFO_MASK);
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+
+	/* Wait until the generic FIFO command is empty */
+	do {
+		statusreg = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
+
+		if ((statusreg & GQSPI_ISR_GENFIFOEMPTY_MASK) &&
+			(statusreg & GQSPI_ISR_TXEMPTY_MASK))
+			break;
+		else
+			cpu_relax();
+	} while (!time_after_eq(jiffies, timeout));
+
+	if (time_after_eq(jiffies, timeout))
+		dev_err(xqspi->dev, "Chip select timed out\n");
+}
+
+/**
+ * zynqmp_qspi_setup_transfer:	Configure QSPI controller for specified
+ *				transfer
+ * @qspi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer setup parameters
+ *
+ * Sets the operational mode of QSPI controller for the next QSPI transfer and
+ * sets the requested clock frequency.
+ *
+ * Return:	Always 0
+ *
+ * Note:
+ *	If the requested frequency is not an exact match with what can be
+ *	obtained using the pre-scalar value, the driver sets the clock
+ *	frequency which is lower than the requested frequency (maximum lower)
+ *	for the transfer.
+ *
+ *	If the requested frequency is higher or lower than that is supported
+ *	by the QSPI controller the driver will set the highest or lowest
+ *	frequency supported by controller.
+ */
+static int zynqmp_qspi_setup_transfer(struct spi_device *qspi,
+				      struct spi_transfer *transfer)
+{
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(qspi->master);
+	ulong clk_rate;
+	u32 config_reg, req_hz, baud_rate_val = 0;
+
+	if (transfer)
+		req_hz = transfer->speed_hz;
+	else
+		req_hz = qspi->max_speed_hz;
+
+	/* Set the clock frequency */
+	/* If req_hz == 0, default to lowest speed */
+	clk_rate = clk_get_rate(xqspi->refclk);
+
+	while ((baud_rate_val < GQSPI_BAUD_DIV_MAX) &&
+	       (clk_rate /
+		(GQSPI_BAUD_DIV_SHIFT << baud_rate_val)) > req_hz)
+		baud_rate_val++;
+
+	config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+
+	/* Set the QSPI clock phase and clock polarity */
+	config_reg &= (~GQSPI_CFG_CLK_PHA_MASK) & (~GQSPI_CFG_CLK_POL_MASK);
+
+	if (qspi->mode & SPI_CPHA)
+		config_reg |= GQSPI_CFG_CLK_PHA_MASK;
+	if (qspi->mode & SPI_CPOL)
+		config_reg |= GQSPI_CFG_CLK_POL_MASK;
+
+	config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK;
+	config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT);
+	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+	return 0;
+}
+
+/**
+ * zynqmp_qspi_setup:	Configure the QSPI controller
+ * @qspi:	Pointer to the spi_device structure
+ *
+ * Sets the operational mode of QSPI controller for the next QSPI transfer,
+ * baud rate and divisor value to setup the requested qspi clock.
+ *
+ * Return:	0 on success; error value otherwise.
+ */
+static int zynqmp_qspi_setup(struct spi_device *qspi)
+{
+	if (qspi->master->busy)
+		return -EBUSY;
+	return 0;
+}
+
+/**
+ * zynqmp_qspi_filltxfifo:	Fills the TX FIFO as long as there is room in
+ *				the FIFO or the bytes required to be
+ *				transmitted.
+ * @xqspi:	Pointer to the zynqmp_qspi structure
+ * @size:	Number of bytes to be copied from TX buffer to TX FIFO
+ */
+static void zynqmp_qspi_filltxfifo(struct zynqmp_qspi *xqspi, int size)
+{
+	u32 count = 0, intermediate;
+
+	while ((xqspi->bytes_to_transfer > 0) && (count < size)) {
+		memcpy(&intermediate, xqspi->txbuf, 4);
+		zynqmp_gqspi_write(xqspi, GQSPI_TXD_OFST, intermediate);
+
+		if (xqspi->bytes_to_transfer >= 4) {
+			xqspi->txbuf += 4;
+			xqspi->bytes_to_transfer -= 4;
+		} else {
+			xqspi->txbuf += xqspi->bytes_to_transfer;
+			xqspi->bytes_to_transfer = 0;
+		}
+		count++;
+	}
+}
+
+/**
+ * zynqmp_qspi_readrxfifo:	Fills the RX FIFO as long as there is room in
+ *				the FIFO.
+ * @xqspi:	Pointer to the zynqmp_qspi structure
+ * @size:	Number of bytes to be copied from RX buffer to RX FIFO
+ */
+static void zynqmp_qspi_readrxfifo(struct zynqmp_qspi *xqspi, u32 size)
+{
+	ulong data;
+	int count = 0;
+
+	while ((count < size) && (xqspi->bytes_to_receive > 0)) {
+		if (xqspi->bytes_to_receive >= 4) {
+			(*(u32 *) xqspi->rxbuf) =
+			zynqmp_gqspi_read(xqspi, GQSPI_RXD_OFST);
+			xqspi->rxbuf += 4;
+			xqspi->bytes_to_receive -= 4;
+			count += 4;
+		} else {
+			data = zynqmp_gqspi_read(xqspi, GQSPI_RXD_OFST);
+			count += xqspi->bytes_to_receive;
+			zynqmp_qspi_copy_read_data(xqspi, data,
+						   xqspi->bytes_to_receive);
+			xqspi->bytes_to_receive = 0;
+		}
+	}
+}
+
+/**
+ * zynqmp_process_dma_irq:	Handler for DMA done interrupt of QSPI
+ *				controller
+ * @xqspi:	zynqmp_qspi instance pointer
+ *
+ * This function handles DMA interrupt only.
+ */
+static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi)
+{
+	u32 config_reg, genfifoentry;
+
+	dma_unmap_single(xqspi->dev, xqspi->dma_addr,
+				xqspi->dma_rx_bytes, DMA_FROM_DEVICE);
+	xqspi->rxbuf += xqspi->dma_rx_bytes;
+	xqspi->bytes_to_receive -= xqspi->dma_rx_bytes;
+	xqspi->dma_rx_bytes = 0;
+
+	/* Disabling the DMA interrupts */
+	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_DIS_OFST,
+					GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
+
+	if (xqspi->bytes_to_receive > 0) {
+		/* Switch to IO mode,for remaining bytes to receive */
+		config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+		config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+		zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+
+		/* Initiate the transfer of remaining bytes */
+		genfifoentry = xqspi->genfifoentry;
+		genfifoentry |= xqspi->bytes_to_receive;
+		zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+
+		/* Dummy generic FIFO entry */
+		zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+
+		/* Manual start */
+		zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+			(zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+			GQSPI_CFG_START_GEN_FIFO_MASK));
+
+		/* Enable the RX interrupts for IO mode */
+		zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+				GQSPI_IER_GENFIFOEMPTY_MASK |
+				GQSPI_IER_RXNEMPTY_MASK |
+				GQSPI_IER_RXEMPTY_MASK);
+	}
+}
+
+/**
+ * zynqmp_qspi_irq:	Interrupt service routine of the QSPI controller
+ * @irq:	IRQ number
+ * @dev_id:	Pointer to the xqspi structure
+ *
+ * This function handles TX empty only.
+ * On TX empty interrupt this function reads the received data from RX FIFO
+ * and fills the TX FIFO if there is any data remaining to be transferred.
+ *
+ * Return:	IRQ_HANDLED when interrupt is handled
+ *		IRQ_NONE otherwise.
+ */
+static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+	int ret = IRQ_NONE;
+	u32 status, mask, dma_status = 0;
+
+	status = zynqmp_gqspi_read(xqspi, GQSPI_ISR_OFST);
+	zynqmp_gqspi_write(xqspi, GQSPI_ISR_OFST, status);
+	mask = (status & ~(zynqmp_gqspi_read(xqspi, GQSPI_IMASK_OFST)));
+
+	/* Read and clear DMA status */
+	if (xqspi->mode == GQSPI_MODE_DMA) {
+		dma_status =
+			zynqmp_gqspi_read(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST);
+		zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_I_STS_OFST,
+								dma_status);
+	}
+
+	if (mask & GQSPI_ISR_TXNOT_FULL_MASK) {
+		zynqmp_qspi_filltxfifo(xqspi, GQSPI_TX_FIFO_FILL);
+		ret = IRQ_HANDLED;
+	}
+
+	if (dma_status & GQSPI_QSPIDMA_DST_I_STS_DONE_MASK) {
+		zynqmp_process_dma_irq(xqspi);
+		ret = IRQ_HANDLED;
+	} else if (!(mask & GQSPI_IER_RXEMPTY_MASK) &&
+			(mask & GQSPI_IER_GENFIFOEMPTY_MASK)) {
+		zynqmp_qspi_readrxfifo(xqspi, GQSPI_RX_FIFO_FILL);
+		ret = IRQ_HANDLED;
+	}
+
+	if ((xqspi->bytes_to_receive == 0) && (xqspi->bytes_to_transfer == 0)
+			&& ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {
+		zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);
+		spi_finalize_current_transfer(master);
+		ret = IRQ_HANDLED;
+	}
+	return ret;
+}
+
+/**
+ * zynqmp_qspi_selectspimode:	Selects SPI mode - x1 or x2 or x4.
+ * @xqspi:	xqspi is a pointer to the GQSPI instance
+ * @spimode:	spimode - SPI or DUAL or QUAD.
+ * Return:	Mask to set desired SPI mode in GENFIFO entry.
+ */
+static inline u32 zynqmp_qspi_selectspimode(struct zynqmp_qspi *xqspi,
+						u8 spimode)
+{
+	u32 mask = 0;
+
+	switch (spimode) {
+	case GQSPI_SELECT_MODE_DUALSPI:
+		mask = GQSPI_GENFIFO_MODE_DUALSPI;
+		break;
+	case GQSPI_SELECT_MODE_QUADSPI:
+		mask = GQSPI_GENFIFO_MODE_QUADSPI;
+		break;
+	case GQSPI_SELECT_MODE_SPI:
+		mask = GQSPI_GENFIFO_MODE_SPI;
+		break;
+	default:
+		dev_warn(xqspi->dev, "Invalid SPI mode\n");
+	}
+
+	return mask;
+}
+
+/**
+ * zynq_qspi_setuprxdma:	This function sets up the RX DMA operation
+ * @xqspi:	xqspi is a pointer to the GQSPI instance.
+ */
+static void zynq_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
+{
+	u32 rx_bytes, rx_rem, config_reg;
+	dma_addr_t addr;
+	u64 dma_align =  (u64)(uintptr_t)xqspi->rxbuf;
+
+	if ((xqspi->bytes_to_receive < 8) ||
+		((dma_align & GQSPI_DMA_UNALIGN) != 0x0)) {
+		/* Setting to IO mode */
+		config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+		config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+		zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+		xqspi->mode = GQSPI_MODE_IO;
+		xqspi->dma_rx_bytes = 0;
+		return;
+	}
+
+	rx_rem = xqspi->bytes_to_receive % 4;
+	rx_bytes = (xqspi->bytes_to_receive - rx_rem);
+
+	addr = dma_map_single(xqspi->dev, (void *)xqspi->rxbuf,
+						rx_bytes, DMA_FROM_DEVICE);
+	if (dma_mapping_error(xqspi->dev, addr))
+		dev_err(xqspi->dev, "ERR:rxdma:memory not mapped\n");
+
+	xqspi->dma_rx_bytes = rx_bytes;
+	xqspi->dma_addr = addr;
+	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_ADDR_OFST,
+				(u32)(addr & 0xffffffff));
+	addr = ((addr >> 16) >> 16);
+	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_ADDR_MSB_OFST,
+				((u32)addr) & 0xfff);
+
+	/* Enabling the DMA mode */
+	config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);
+	config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+	config_reg |= GQSPI_CFG_MODE_EN_DMA_MASK;
+	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
+
+	/* Switch to DMA mode */
+	xqspi->mode = GQSPI_MODE_DMA;
+
+	/* Write the number of bytes to transfer */
+	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_SIZE_OFST, rx_bytes);
+}
+
+/**
+ * zynqmp_qspi_txrxsetup:	This function checks the TX/RX buffers in
+ *				the transfer and sets up the GENFIFO entries,
+ *				TX FIFO as required.
+ * @xqspi:	xqspi is a pointer to the GQSPI instance.
+ * @transfer:	It is a pointer to the structure containing transfer data.
+ * @genfifoentry:	genfifoentry is pointer to the variable in which
+ *			GENFIFO	mask is returned to calling function
+ */
+static void zynqmp_qspi_txrxsetup(struct zynqmp_qspi *xqspi,
+				  struct spi_transfer *transfer,
+				  u32 *genfifoentry)
+{
+	u32 config_reg;
+
+	/* Transmit */
+	if ((xqspi->txbuf != NULL) && (xqspi->rxbuf == NULL)) {
+		/* Setup data to be TXed */
+		*genfifoentry &= ~GQSPI_GENFIFO_RX;
+		*genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+		*genfifoentry |= GQSPI_GENFIFO_TX;
+		*genfifoentry |=
+			zynqmp_qspi_selectspimode(xqspi, transfer->tx_nbits);
+		xqspi->bytes_to_transfer = transfer->len;
+		if (xqspi->mode == GQSPI_MODE_DMA) {
+			config_reg = zynqmp_gqspi_read(xqspi,
+							GQSPI_CONFIG_OFST);
+			config_reg &= ~GQSPI_CFG_MODE_EN_MASK;
+			zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+								config_reg);
+			xqspi->mode = GQSPI_MODE_IO;
+		}
+		zynqmp_qspi_filltxfifo(xqspi, GQSPI_TXD_DEPTH);
+		/* Discard RX data */
+		xqspi->bytes_to_receive = 0;
+	} else if ((xqspi->txbuf == NULL) && (xqspi->rxbuf != NULL)) {
+		/* Receive */
+
+		/* TX auto fill */
+		*genfifoentry &= ~GQSPI_GENFIFO_TX;
+		/* Setup RX */
+		*genfifoentry |= GQSPI_GENFIFO_DATA_XFER;
+		*genfifoentry |= GQSPI_GENFIFO_RX;
+		*genfifoentry |=
+			zynqmp_qspi_selectspimode(xqspi, transfer->rx_nbits);
+		xqspi->bytes_to_transfer = 0;
+		xqspi->bytes_to_receive = transfer->len;
+		zynq_qspi_setuprxdma(xqspi);
+	}
+}
+
+/**
+ * zynqmp_qspi_start_transfer:	Initiates the QSPI transfer
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ * @qspi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provide information
+ *		about next transfer parameters
+ *
+ * This function fills the TX FIFO, starts the QSPI transfer, and waits for the
+ * transfer to be completed.
+ *
+ * Return:	Number of bytes transferred in the last transfer
+ */
+static int zynqmp_qspi_start_transfer(struct spi_master *master,
+				      struct spi_device *qspi,
+				      struct spi_transfer *transfer)
+{
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+	u32 genfifoentry = 0x0, transfer_len;
+
+	xqspi->txbuf = transfer->tx_buf;
+	xqspi->rxbuf = transfer->rx_buf;
+
+	zynqmp_qspi_setup_transfer(qspi, transfer);
+
+	genfifoentry |= xqspi->genfifocs;
+	genfifoentry |= xqspi->genfifobus;
+
+	zynqmp_qspi_txrxsetup(xqspi, transfer, &genfifoentry);
+
+	if (xqspi->mode == GQSPI_MODE_DMA)
+		transfer_len = xqspi->dma_rx_bytes;
+	else
+		transfer_len = transfer->len;
+
+	xqspi->genfifoentry = genfifoentry;
+	if ((transfer_len) < GQSPI_GENFIFO_IMM_DATA_MASK) {
+		genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
+		genfifoentry |= transfer_len;
+		zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
+	} else {
+		int tempcount = transfer_len;
+		u32 exponent = 8;	/* 2^8 = 256 */
+		u8 imm_data = tempcount & 0xFF;
+
+		tempcount &= ~(tempcount & 0xFF);
+		/* Immediate entry */
+		if (tempcount != 0) {
+			/* Exponent entries */
+			genfifoentry |= GQSPI_GENFIFO_EXP;
+			while (tempcount != 0) {
+				if (tempcount & GQSPI_GENFIFO_EXP_START) {
+					genfifoentry &=
+					    ~GQSPI_GENFIFO_IMM_DATA_MASK;
+					genfifoentry |= exponent;
+					zynqmp_gqspi_write(xqspi,
+							   GQSPI_GEN_FIFO_OFST,
+							   genfifoentry);
+				}
+				tempcount = tempcount >> 1;
+				exponent++;
+			}
+		}
+		if (imm_data != 0) {
+			genfifoentry &= ~GQSPI_GENFIFO_EXP;
+			genfifoentry &= ~GQSPI_GENFIFO_IMM_DATA_MASK;
+			genfifoentry |= (u8) (imm_data & 0xFF);
+			zynqmp_gqspi_write(xqspi,
+					   GQSPI_GEN_FIFO_OFST, genfifoentry);
+		}
+	}
+
+	if ((xqspi->mode == GQSPI_MODE_IO) &&
+			(xqspi->rxbuf != NULL)) {
+		/* Dummy generic FIFO entry */
+		zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
+	}
+
+	/* Since we are using manual mode */
+	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
+			   zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
+			   GQSPI_CFG_START_GEN_FIFO_MASK);
+
+	if (xqspi->txbuf != NULL)
+		/* Enable interrupts for TX */
+		zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+				   GQSPI_IER_TXEMPTY_MASK |
+					GQSPI_IER_GENFIFOEMPTY_MASK |
+					GQSPI_IER_TXNOT_FULL_MASK);
+
+	if (xqspi->rxbuf != NULL) {
+		/* Enable interrupts for RX */
+		if (xqspi->mode == GQSPI_MODE_DMA) {
+			/* Enable DMA interrupts */
+			zynqmp_gqspi_write(xqspi,
+					GQSPI_QSPIDMA_DST_I_EN_OFST,
+					GQSPI_QSPIDMA_DST_I_EN_DONE_MASK);
+		} else {
+			zynqmp_gqspi_write(xqspi, GQSPI_IER_OFST,
+					GQSPI_IER_GENFIFOEMPTY_MASK |
+					GQSPI_IER_RXNEMPTY_MASK |
+					GQSPI_IER_RXEMPTY_MASK);
+		}
+	}
+
+	return transfer->len;
+}
+
+/**
+ * zynqmp_qspi_suspend:	Suspend method for the QSPI driver
+ * @_dev:	Address of the platform_device structure
+ *
+ * This function stops the QSPI driver queue and disables the QSPI controller
+ *
+ * Return:	Always 0
+ */
+static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+						    struct platform_device,
+						    dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+
+	spi_master_suspend(master);
+
+	zynqmp_unprepare_transfer_hardware(master);
+
+	return 0;
+}
+
+/**
+ * zynqmp_qspi_resume:	Resume method for the QSPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * The function starts the QSPI driver queue and initializes the QSPI
+ * controller
+ *
+ * Return:	0 on success; error value otherwise
+ */
+static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+						    struct platform_device,
+						    dev);
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+	int ret = 0;
+
+	ret = clk_enable(xqspi->pclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable APB clock.\n");
+		return ret;
+	}
+
+	ret = clk_enable(xqspi->refclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable device clock.\n");
+		clk_disable(xqspi->pclk);
+		return ret;
+	}
+
+	spi_master_resume(master);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(zynqmp_qspi_dev_pm_ops, zynqmp_qspi_suspend,
+			 zynqmp_qspi_resume);
+
+/**
+ * zynqmp_qspi_probe:	Probe method for the QSPI driver
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * This function initializes the driver data structures and the hardware.
+ *
+ * Return:	0 on success; error value otherwise
+ */
+static int zynqmp_qspi_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct spi_master *master;
+	struct zynqmp_qspi *xqspi;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
+	if (!master)
+		return -ENOMEM;
+
+	xqspi = spi_master_get_devdata(master);
+	master->dev.of_node = pdev->dev.of_node;
+	platform_set_drvdata(pdev, master);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	xqspi->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(xqspi->regs)) {
+		ret = PTR_ERR(xqspi->regs);
+		goto remove_master;
+	}
+
+	xqspi->dev = dev;
+	xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(xqspi->pclk)) {
+		dev_err(dev, "pclk clock not found.\n");
+		ret = PTR_ERR(xqspi->pclk);
+		goto remove_master;
+	}
+
+	ret = clk_prepare_enable(xqspi->pclk);
+	if (ret) {
+		dev_err(dev, "Unable to enable APB clock.\n");
+		goto remove_master;
+	}
+
+	xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
+	if (IS_ERR(xqspi->refclk)) {
+		dev_err(dev, "ref_clk clock not found.\n");
+		ret = PTR_ERR(xqspi->refclk);
+		goto clk_dis_pclk;
+	}
+
+	ret = clk_prepare_enable(xqspi->refclk);
+	if (ret) {
+		dev_err(dev, "Unable to enable device clock.\n");
+		goto clk_dis_pclk;
+	}
+
+	/* QSPI controller initializations */
+	zynqmp_qspi_init_hw(xqspi);
+
+	xqspi->irq = platform_get_irq(pdev, 0);
+	if (xqspi->irq <= 0) {
+		ret = -ENXIO;
+		dev_err(dev, "irq resource not found\n");
+		goto clk_dis_all;
+	}
+	ret = devm_request_irq(&pdev->dev, xqspi->irq, zynqmp_qspi_irq,
+			       0, pdev->name, master);
+	if (ret != 0) {
+		ret = -ENXIO;
+		dev_err(dev, "request_irq failed\n");
+		goto clk_dis_all;
+	}
+
+	master->num_chipselect = GQSPI_DEFAULT_NUM_CS;
+
+	master->setup = zynqmp_qspi_setup;
+	master->set_cs = zynqmp_qspi_chipselect;
+	master->transfer_one = zynqmp_qspi_start_transfer;
+	master->prepare_transfer_hardware = zynqmp_prepare_transfer_hardware;
+	master->unprepare_transfer_hardware =
+					zynqmp_unprepare_transfer_hardware;
+	master->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
+			    SPI_TX_DUAL | SPI_TX_QUAD;
+
+	if (master->dev.parent == NULL)
+		master->dev.parent = &master->dev;
+
+	ret = spi_register_master(master);
+	if (ret)
+		goto clk_dis_all;
+
+	return 0;
+
+clk_dis_all:
+	clk_disable_unprepare(xqspi->refclk);
+clk_dis_pclk:
+	clk_disable_unprepare(xqspi->pclk);
+remove_master:
+	spi_master_put(master);
+
+	return ret;
+}
+
+/**
+ * zynqmp_qspi_remove:	Remove method for the QSPI driver
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees all resources allocated to
+ * the device.
+ *
+ * Return:	0 Always
+ */
+static int zynqmp_qspi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
+
+	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
+	clk_disable_unprepare(xqspi->refclk);
+	clk_disable_unprepare(xqspi->pclk);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+static const struct of_device_id zynqmp_qspi_of_match[] = {
+	{ .compatible = "xlnx,zynqmp-qspi-1.0", },
+	{ /* End of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, zynqmp_qspi_of_match);
+
+static struct platform_driver zynqmp_qspi_driver = {
+	.probe = zynqmp_qspi_probe,
+	.remove = zynqmp_qspi_remove,
+	.driver = {
+		.name = "zynqmp-qspi",
+		.of_match_table = zynqmp_qspi_of_match,
+		.pm = &zynqmp_qspi_dev_pm_ops,
+	},
+};
+
+module_platform_driver(zynqmp_qspi_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx Zynqmp QSPI driver");
+MODULE_LICENSE("GPL");

drivers/spi/spi.c

@@ -571,7 +571,7 @@ static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
 	return 0;
 }
 
-static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
+static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
 {
 	struct spi_transfer *xfer;
 	struct device *tx_dev, *rx_dev;
@@ -583,15 +583,6 @@ static int spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
 	rx_dev = master->dma_rx->device->dev;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-		/*
-		 * Restore the original value of tx_buf or rx_buf if they are
-		 * NULL.
-		 */
-		if (xfer->tx_buf == master->dummy_tx)
-			xfer->tx_buf = NULL;
-		if (xfer->rx_buf == master->dummy_rx)
-			xfer->rx_buf = NULL;
-
 		if (!master->can_dma(master, msg->spi, xfer))
 			continue;
 
@@ -608,13 +599,32 @@ static inline int __spi_map_msg(struct spi_master *master,
 	return 0;
 }
 
-static inline int spi_unmap_msg(struct spi_master *master,
-				struct spi_message *msg)
+static inline int __spi_unmap_msg(struct spi_master *master,
+				  struct spi_message *msg)
 {
 	return 0;
 }
 #endif /* !CONFIG_HAS_DMA */
 
+static inline int spi_unmap_msg(struct spi_master *master,
+				struct spi_message *msg)
+{
+	struct spi_transfer *xfer;
+
+	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+		/*
+		 * Restore the original value of tx_buf or rx_buf if they are
+		 * NULL.
+		 */
+		if (xfer->tx_buf == master->dummy_tx)
+			xfer->tx_buf = NULL;
+		if (xfer->rx_buf == master->dummy_rx)
+			xfer->rx_buf = NULL;
+	}
+
+	return __spi_unmap_msg(master, msg);
+}
+
 static int spi_map_msg(struct spi_master *master, struct spi_message *msg)
 {
 	struct spi_transfer *xfer;
@@ -988,9 +998,6 @@ void spi_finalize_current_message(struct spi_master *master)
 
 	spin_lock_irqsave(&master->queue_lock, flags);
 	mesg = master->cur_msg;
-	master->cur_msg = NULL;
-
-	queue_kthread_work(&master->kworker, &master->pump_messages);
 	spin_unlock_irqrestore(&master->queue_lock, flags);
 
 	spi_unmap_msg(master, mesg);
@@ -1003,9 +1010,13 @@ void spi_finalize_current_message(struct spi_master *master)
 		}
 	}
 
-	trace_spi_message_done(mesg);
-
+	spin_lock_irqsave(&master->queue_lock, flags);
+	master->cur_msg = NULL;
 	master->cur_msg_prepared = false;
+	queue_kthread_work(&master->kworker, &master->pump_messages);
+	spin_unlock_irqrestore(&master->queue_lock, flags);
+
+	trace_spi_message_done(mesg);
 
 	mesg->state = NULL;
 	if (mesg->complete)

drivers/spi/spidev.c

@@ -95,37 +95,25 @@ MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message");
 
 /*-------------------------------------------------------------------------*/
 
-/*
- * We can't use the standard synchronous wrappers for file I/O; we
- * need to protect against async removal of the underlying spi_device.
- */
-static void spidev_complete(void *arg)
-{
-	complete(arg);
-}
-
 static ssize_t
 spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 {
 	DECLARE_COMPLETION_ONSTACK(done);
 	int status;
-
-	message->complete = spidev_complete;
-	message->context = &done;
+	struct spi_device *spi;
 
 	spin_lock_irq(&spidev->spi_lock);
-	if (spidev->spi == NULL)
+	spi = spidev->spi;
+	spin_unlock_irq(&spidev->spi_lock);
+
+	if (spi == NULL)
 		status = -ESHUTDOWN;
 	else
-		status = spi_async(spidev->spi, message);
-	spin_unlock_irq(&spidev->spi_lock);
+		status = spi_sync(spi, message);
+
+	if (status == 0)
+		status = message->actual_length;
 
-	if (status == 0) {
-		wait_for_completion(&done);
-		status = message->status;
-		if (status == 0)
-			status = message->actual_length;
-	}
 	return status;
 }
 
@@ -647,7 +635,6 @@ err_find_dev:
 static int spidev_release(struct inode *inode, struct file *filp)
 {
 	struct spidev_data	*spidev;
-	int			status = 0;
 
 	mutex_lock(&device_list_lock);
 	spidev = filp->private_data;
@@ -676,7 +663,7 @@ static int spidev_release(struct inode *inode, struct file *filp)
 	}
 	mutex_unlock(&device_list_lock);
 
-	return status;
+	return 0;
 }
 
 static const struct file_operations spidev_fops = {

include/linux/pxa2xx_ssp.h

@@ -194,8 +194,9 @@ enum pxa_ssp_type {
 	PXA168_SSP,
 	PXA910_SSP,
 	CE4100_SSP,
-	LPSS_SSP,
 	QUARK_X1000_SSP,
+	LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
+	LPSS_BYT_SSP,
 };
 
 struct ssp_device {