Merge tag 'at91-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/multiplatform

Merge "at91: multiplatform for 4.1 #1" from Nicolas Ferre:

This is the multi-platform support for AT91:
- reworked arch/arm/mach-at91/Kconfig and arch/arm/Kconfig to switch to
  multi-platform
- updated at91_dt_defconfig
- continue the cleanup of unneeded files and code chunks

* tag 'at91-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (61 commits)
  ARM: at91: drop AT91_TIMER_HZ
  ARM: at91: remove hardware.h
  ARM: at91: remove SoC headers
  ARM: at91: remove useless mach/cpu.h
  ARM: at91: remove unused headers
  ARM: at91: switch at91_dt_defconfig to multiplatform
  ARM: at91: switch to multiplatform
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -46,10 +46,12 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st"
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
 
 TC/TCLIB Timer required properties:
 - compatible: Should be "atmel,<chip>-tcb".

Documentation/devicetree/bindings/serial/atmel-usart.txt

@@ -1,9 +1,10 @@
 * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-usart"
+- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
   The compatible <chip> indicated will be the first SoC to support an
   additional mode or an USART new feature.
+  For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt
 - clock-names: tuple listing input clock names.

Documentation/devicetree/bindings/watchdog/atmel-wdt.txt

@@ -26,6 +26,11 @@ Optional properties:
 - atmel,disable : Should be present if you want to disable the watchdog.
 - atmel,idle-halt : Should be present if you want to stop the watchdog when
 	entering idle state.
+	CAUTION: This property should be used with care, it actually makes the
+	watchdog not counting when the CPU is in idle state, therefore the
+	watchdog reset time depends on mean CPU usage and will not reset at all
+	if the CPU stop working while it is in idle state, which is probably
+	not what you want.
 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
 	entering debug state.
 

arch/arm/Kconfig

@@ -356,19 +356,6 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_AT91
-	bool "Atmel AT91"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select PINCTRL
-	select PINCTRL_AT91
-	select USE_OF
-	help
-	  This enables support for systems based on Atmel
-	  AT91RM9200, AT91SAM9 and SAMA5 processors.
-
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -1514,7 +1501,7 @@ config HZ_FIXED
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
-	default AT91_TIMER_HZ if ARCH_AT91
+	default 128 if SOC_AT91RM9200
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 

arch/arm/boot/dts/at91rm9200.dtsi

@@ -356,9 +356,13 @@
 			};
 
 			st: timer@fffffd00 {
-				compatible = "atmel,at91rm9200-st";
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
 				reg = <0xfffffd00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
 			};
 
 			rtc: rtc@fffffe00 {
@@ -830,7 +834,7 @@
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91rm9200-usart";
+				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9260.dtsi

@@ -494,12 +494,12 @@
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC8 periph B */
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC10 periph B */
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -753,7 +753,7 @@
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -853,7 +853,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -976,7 +976,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -124,11 +124,12 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&usb>, <&udc_clk>, <&udpck>;
-				clock-names = "usb_clk", "udc_clk", "udpck";
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
 				status = "disabled";
 			};
 
@@ -262,7 +263,7 @@
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix";
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 
@@ -275,7 +276,7 @@
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9263.dtsi

@@ -69,7 +69,7 @@
 
 	sram1: sram@00500000 {
 		compatible = "mmio-sram";
-		reg = <0x00300000 0x4000>;
+		reg = <0x00500000 0x4000>;
 	};
 
 	ahb {
@@ -762,7 +762,7 @@
 			};
 
 			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -856,7 +856,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -905,7 +905,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -893,7 +893,7 @@
 			};
 
 			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -1116,7 +1116,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1301,7 +1300,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -757,7 +757,7 @@
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -894,7 +894,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9rl.dtsi

@@ -377,7 +377,7 @@
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -860,7 +860,7 @@
 			};
 
 			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -1066,7 +1066,7 @@
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&usb>, <&udphs_clk>;
+				clocks = <&utmi>, <&udphs_clk>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 
@@ -1130,7 +1130,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1186,7 +1185,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/sama5d3.dtsi

@@ -439,7 +439,7 @@
 			};
 
 			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
@@ -1248,7 +1248,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 
@@ -1416,7 +1415,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};

arch/arm/boot/dts/sama5d4.dtsi

@@ -66,6 +66,7 @@
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		i2c0 = &i2c0;
 		i2c2 = &i2c2;
 	};
 	cpus {
@@ -259,7 +260,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "uhpck";
 			status = "disabled";
 		};
@@ -461,8 +462,8 @@
 
 					lcdck: lcdck {
 						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
+						reg = <3>;
+						clocks = <&mck>;
 					};
 
 					smdck: smdck {
@@ -770,7 +771,7 @@
 						reg = <50>;
 					};
 
-					lcd_clk: lcd_clk {
+					lcdc_clk: lcdc_clk {
 						#clock-cells = <0>;
 						reg = <51>;
 					};
@@ -1063,7 +1064,7 @@
 			};
 
 			dbgu: serial@fc069000 {
-				compatible = "atmel,at91sam9260-usart";
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";

arch/arm/configs/at91_dt_defconfig

@@ -13,10 +13,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAM_V4_V5=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
-CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -70,6 +73,7 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_DM9000=y

arch/arm/configs/sama5_defconfig

@@ -3,8 +3,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y

arch/arm/include/debug/at91.S

@@ -18,8 +18,11 @@
 #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
 #endif
 
-/* Keep in sync with mach-at91/include/mach/hardware.h */
+#ifdef CONFIG_MMU
 #define AT91_IO_P2V(x) ((x) - 0x01000000)
+#else
+#define AT91_IO_P2V(x) (x)
+#endif
 
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */

arch/arm/mach-at91/Kconfig

@@ -1,55 +1,14 @@
-if ARCH_AT91
-
-config HAVE_AT91_UTMI
-	bool
-
-config HAVE_AT91_USB_CLK
-	bool
-
-config COMMON_CLK_AT91
-	bool
-	select COMMON_CLK
-
-config HAVE_AT91_SMD
-	bool
-
-config HAVE_AT91_H32MX
-	bool
-
-config SOC_SAMA5
-	bool
-	select ATMEL_AIC5_IRQ
+menuconfig ARCH_AT91
+	bool "Atmel SoCs"
+	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select MEMORY
-	select ATMEL_SDRAMC
-	select PHYLIB if NETDEVICES
-
-menu "Atmel AT91 System-on-Chip"
-
-choice
-
-	prompt "Core type"
-
-config SOC_SAM_V4_V5
-	bool "ARM9 AT91SAM9/AT91RM9200"
-	help
-	  Select this if you are using one of Atmel's AT91SAM9 or
-	  AT91RM9200 SoC.
-
-config SOC_SAM_V7
-	bool "Cortex A5"
-	help
-	  Select this if you are using one of Atmel's SAMA5D3 SoC.
-
-endchoice
+	select PINCTRL
+	select PINCTRL_AT91
+	select SOC_BUS
 
-comment "Atmel AT91 Processor"
-
-if SOC_SAM_V7
+if ARCH_AT91
 config SOC_SAMA5D3
-	bool "SAMA5D3 family"
+	bool "SAMA5D3 family" if ARCH_MULTI_V7
 	select SOC_SAMA5
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
@@ -60,9 +19,8 @@ config SOC_SAMA5D3
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
 
 config SOC_SAMA5D4
-	bool "SAMA5D4 family"
+	bool "SAMA5D4 family" if ARCH_MULTI_V7
 	select SOC_SAMA5
-	select CLKSRC_MMIO
 	select CACHE_L2X0
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
@@ -71,29 +29,31 @@ config SOC_SAMA5D4
 	select HAVE_AT91_H32MX
 	help
 	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
-endif
 
-if SOC_SAM_V4_V5
 config SOC_AT91RM9200
-	bool "AT91RM9200"
+	bool "AT91RM9200" if ARCH_MULTI_V4T
 	select ATMEL_AIC_IRQ
-	select COMMON_CLK_AT91
+	select ATMEL_ST
 	select CPU_ARM920T
-	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USB_CLK
+	select MIGHT_HAVE_PCI
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using Atmel's AT91RM9200 SoC.
 
 config SOC_AT91SAM9
-	bool "AT91SAM9"
+	bool "AT91SAM9" if ARCH_MULTI_V5
 	select ATMEL_AIC_IRQ
 	select ATMEL_SDRAMC
-	select COMMON_CLK_AT91
 	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
 	select MEMORY
+	select SOC_SAM_V4_V5
+	select SRAM if PM
 	help
 	  Select this if you are using one of those Atmel SoC:
 	    AT91SAM9260
@@ -112,40 +72,35 @@ config SOC_AT91SAM9
 	    AT91SAM9X25
 	    AT91SAM9X35
 	    AT91SAM9XE
-endif # SOC_SAM_V4_V5
 
-comment "AT91 Feature Selections"
+config HAVE_AT91_UTMI
+	bool
 
-config AT91_SLOW_CLOCK
-	bool "Suspend-to-RAM disables main oscillator"
-	select SRAM
-	depends on SUSPEND
-	help
-	  Select this if you want Suspend-to-RAM to save the most power
-	  possible (without powering off the CPU) by disabling the PLLs
-	  and main oscillator so that only the 32 KiHz clock is available.
+config HAVE_AT91_USB_CLK
+	bool
 
-	  When only that slow-clock is available, some peripherals lose
-	  functionality.  Many can't issue wakeup events unless faster
-	  clocks are available.  Some lose their operating state and
-	  need to be completely re-initialized.
+config COMMON_CLK_AT91
+	bool
+	select COMMON_CLK
 
-config AT91_TIMER_HZ
-       int "Kernel HZ (jiffies per second)"
-       range 32 1024
-       depends on ARCH_AT91
-       default "128" if SOC_AT91RM9200
-       default "100"
-       help
-	  On AT91rm9200 chips where you're using a system clock derived
-	  from the 32768 Hz hardware clock, this tick rate should divide
-	  it exactly: use a power-of-two value, such as 128 or 256, to
-	  reduce timing errors caused by rounding.
+config HAVE_AT91_SMD
+	bool
+
+config HAVE_AT91_H32MX
+	bool
 
-	  On AT91sam926x chips, or otherwise when using a higher precision
-	  system clock (of at least several MHz), rounding is less of a
-	  problem so it can be safer to use a decimal values like 100.
+config SOC_SAM_V4_V5
+	bool
 
-endmenu
+config SOC_SAM_V7
+	bool
+
+config SOC_SAMA5
+	bool
+	select ATMEL_AIC5_IRQ
+	select ATMEL_SDRAMC
+	select MEMORY
+	select SOC_SAM_V7
+	select SRAM if PM
 
 endif

arch/arm/mach-at91/Makefile

@@ -1,19 +1,21 @@
 #
 # Makefile for the linux kernel.
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
-obj-y		:= setup.o
+obj-y		:= soc.o
 
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
-obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+obj-$(CONFIG_PM)		+= pm_suspend.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG

arch/arm/mach-at91/at91rm9200.c

@@ -8,60 +8,42 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/clk-provider.h>
 
-#include <asm/setup.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/system_misc.h>
 
-#include <mach/at91_st.h>
-
 #include "generic.h"
+#include "soc.h"
 
-static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
-{
-	/*
-	 * Perform a hardware reset with the use of the Watchdog timer.
-	 */
-	at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-static void __init at91rm9200_dt_timer_init(void)
-{
-	of_clk_init(NULL);
-	at91rm9200_timer_init();
-}
+static const struct at91_soc rm9200_socs[] = {
+	AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
+	{ /* sentinel */ },
+};
 
 static void __init at91rm9200_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	struct soc_device *soc;
+	struct device *soc_dev = NULL;
+
+	soc = at91_soc_init(rm9200_socs);
+	if (soc != NULL)
+		soc_dev = soc_device_to_device(soc);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
 	arm_pm_idle = at91rm9200_idle;
-	arm_pm_restart = at91rm9200_restart;
 	at91rm9200_pm_init();
 }
 
-
-
 static const char *at91rm9200_dt_board_compat[] __initconst = {
 	"atmel,at91rm9200",
 	NULL
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
-	.init_time      = at91rm9200_dt_timer_init,
-	.map_io		= at91_map_io,
 	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END

arch/arm/mach-at91/at91sam9.c

@@ -7,29 +7,68 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/clk-provider.h>
 
-#include <asm/system_misc.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 
 #include "generic.h"
+#include "soc.h"
 
-static void __init at91sam9_dt_device_init(void)
+static const struct at91_soc at91sam9_socs[] = {
+	AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
+	AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
+	AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
+	AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
+	AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
+		 "at91sam9m11", "at91sam9g45"),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
+		 "at91sam9m10", "at91sam9g45"),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
+		 "at91sam9g46", "at91sam9g45"),
+	AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
+		 "at91sam9g45", "at91sam9g45"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
+		 "at91sam9g15", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
+		 "at91sam9g35", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
+		 "at91sam9x35", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
+		 "at91sam9g25", "at91sam9x5"),
+	AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
+		 "at91sam9x25", "at91sam9x5"),
+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
+		 "at91sam9cn12", "at91sam9n12"),
+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
+		 "at91sam9n12", "at91sam9n12"),
+	AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
+		 "at91sam9cn11", "at91sam9n12"),
+	AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
+	AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
+	AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
+	{ /* sentinel */ },
+};
+
+static void __init at91sam9_common_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	struct soc_device *soc;
+	struct device *soc_dev = NULL;
+
+	soc = at91_soc_init(at91sam9_socs);
+	if (soc != NULL)
+		soc_dev = soc_device_to_device(soc);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
 	arm_pm_idle = at91sam9_idle;
+}
+
+static void __init at91sam9_dt_device_init(void)
+{
+	at91sam9_common_init();
 	at91sam9260_pm_init();
 }
 
@@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= at91sam9_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
 
 static void __init at91sam9g45_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	arm_pm_idle = at91sam9_idle;
+	at91sam9_common_init();
 	at91sam9g45_pm_init();
 }
 
@@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= at91sam9g45_dt_device_init,
 	.dt_compat	= at91sam9g45_board_compat,
 MACHINE_END
 
 static void __init at91sam9x5_dt_device_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	arm_pm_idle = at91sam9_idle;
+	at91sam9_common_init();
 	at91sam9x5_pm_init();
 }
 
@@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = {
 
 DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= at91sam9x5_dt_device_init,
 	.dt_compat	= at91sam9x5_board_compat,
 MACHINE_END

arch/arm/mach-at91/generic.h

@@ -18,17 +18,10 @@
 extern void __init at91_map_io(void);
 extern void __init at91_alt_map_io(void);
 
- /* Timer */
-extern void at91rm9200_timer_init(void);
-
 /* idle */
 extern void at91rm9200_idle(void);
 extern void at91sam9_idle(void);
 
-/* Matrix */
-extern void at91_ioremap_matrix(u32 base_addr);
-
-
 #ifdef CONFIG_PM
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9260_pm_init(void);

arch/arm/mach-at91/include/mach/at91_dbgu.h

@@ -1,63 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define AT91_DBGU_CR		(0x00)	/* Control Register */
-#define AT91_DBGU_MR		(0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(0x08)	/* Interrupt Enable Register */
-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(0x20)	/* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR		(0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(0x44)	/* Chip ID Extension Register */
-#define AT91_DBGU_FNR		(0x48)	/* Force NTRST Register [SAM9 only] */
-#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
-#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
-#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
-#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
-#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
-#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
-#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
-#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
-#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
-#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
-#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
-#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
-#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
-#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
-#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
-
-#endif

arch/arm/mach-at91/include/mach/at91_matrix.h

@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#ifndef __MACH_AT91_MATRIX_H__
-#define __MACH_AT91_MATRIX_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_matrix_base;
-
-#define at91_matrix_read(field) \
-	__raw_readl(at91_matrix_base + field)
-
-#define at91_matrix_write(field, value) \
-	__raw_writel(value, at91_matrix_base + field)
-
-#else
-.extern at91_matrix_base
-#endif
-
-#endif /* __MACH_AT91_MATRIX_H__ */

arch/arm/mach-at91/include/mach/at91_st.h

@@ -1,61 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_st_base;
-
-#define at91_st_read(field) \
-	__raw_readl(at91_st_base + field)
-
-#define at91_st_write(field, value) \
-	__raw_writel(value, at91_st_base + field)
-#else
-.extern at91_st_base
-#endif
-
-#define	AT91_ST_CR		0x00			/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		0x04			/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		0x08			/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		0x0c			/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		0x10			/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		0x14			/* Interrupt Enable Register */
-#define	AT91_ST_IDR		0x18			/* Interrupt Disable Register */
-#define	AT91_ST_IMR		0x1c			/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		0x20			/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		0x24			/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif

arch/arm/mach-at91/include/mach/at91rm9200.h

@@ -1,103 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91RM9200_ID_US0	6	/* USART 0 */
-#define AT91RM9200_ID_US1	7	/* USART 1 */
-#define AT91RM9200_ID_US2	8	/* USART 2 */
-#define AT91RM9200_ID_US3	9	/* USART 3 */
-#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-#define AT91RM9200_ID_UHP	23	/* USB Host port */
-#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0	0xfffa0000
-#define AT91RM9200_BASE_TC0	0xfffa0000
-#define AT91RM9200_BASE_TC1	0xfffa0040
-#define AT91RM9200_BASE_TC2	0xfffa0080
-#define AT91RM9200_BASE_TCB1	0xfffa4000
-#define AT91RM9200_BASE_TC3	0xfffa4000
-#define AT91RM9200_BASE_TC4	0xfffa4040
-#define AT91RM9200_BASE_TC5	0xfffa4080
-#define AT91RM9200_BASE_UDP	0xfffb0000
-#define AT91RM9200_BASE_MCI	0xfffb4000
-#define AT91RM9200_BASE_TWI	0xfffb8000
-#define AT91RM9200_BASE_EMAC	0xfffbc000
-#define AT91RM9200_BASE_US0	0xfffc0000
-#define AT91RM9200_BASE_US1	0xfffc4000
-#define AT91RM9200_BASE_US2	0xfffc8000
-#define AT91RM9200_BASE_US3	0xfffcc000
-#define AT91RM9200_BASE_SSC0	0xfffd0000
-#define AT91RM9200_BASE_SSC1	0xfffd4000
-#define AT91RM9200_BASE_SSC2	0xfffd8000
-#define AT91RM9200_BASE_SPI	0xfffe0000
-
-
-/*
- * System Peripherals
- */
-#define AT91RM9200_BASE_DBGU	AT91_BASE_DBGU0	/* Debug Unit */
-#define AT91RM9200_BASE_PIOA	0xfffff400	/* PIO Controller A */
-#define AT91RM9200_BASE_PIOB	0xfffff600	/* PIO Controller B */
-#define AT91RM9200_BASE_PIOC	0xfffff800	/* PIO Controller C */
-#define AT91RM9200_BASE_PIOD	0xfffffa00	/* PIO Controller D */
-#define AT91RM9200_BASE_ST	0xfffffd00	/* System Timer */
-#define AT91RM9200_BASE_RTC	0xfffffe00	/* Real-Time Clock */
-#define AT91RM9200_BASE_MC	0xffffff00	/* Memory Controllers */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
-
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9260.h

@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0	6	/* USART 0 */
-#define AT91SAM9260_ID_US1	7	/* USART 1 */
-#define AT91SAM9260_ID_US2	8	/* USART 2 */
-#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP	20	/* USB Host port */
-#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
-#define AT91SAM9260_ID_US3	23	/* USART 3 */
-#define AT91SAM9260_ID_US4	24	/* USART 4 */
-#define AT91SAM9260_ID_US5	25	/* USART 5 */
-#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0		0xfffa0000
-#define AT91SAM9260_BASE_TC0		0xfffa0000
-#define AT91SAM9260_BASE_TC1		0xfffa0040
-#define AT91SAM9260_BASE_TC2		0xfffa0080
-#define AT91SAM9260_BASE_UDP		0xfffa4000
-#define AT91SAM9260_BASE_MCI		0xfffa8000
-#define AT91SAM9260_BASE_TWI		0xfffac000
-#define AT91SAM9260_BASE_US0		0xfffb0000
-#define AT91SAM9260_BASE_US1		0xfffb4000
-#define AT91SAM9260_BASE_US2		0xfffb8000
-#define AT91SAM9260_BASE_SSC		0xfffbc000
-#define AT91SAM9260_BASE_ISI		0xfffc0000
-#define AT91SAM9260_BASE_EMAC		0xfffc4000
-#define AT91SAM9260_BASE_SPI0		0xfffc8000
-#define AT91SAM9260_BASE_SPI1		0xfffcc000
-#define AT91SAM9260_BASE_US3		0xfffd0000
-#define AT91SAM9260_BASE_US4		0xfffd4000
-#define AT91SAM9260_BASE_US5		0xfffd8000
-#define AT91SAM9260_BASE_TCB1		0xfffdc000
-#define AT91SAM9260_BASE_TC3		0xfffdc000
-#define AT91SAM9260_BASE_TC4		0xfffdc040
-#define AT91SAM9260_BASE_TC5		0xfffdc080
-#define AT91SAM9260_BASE_ADC		0xfffe0000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9260_BASE_ECC	0xffffe800
-#define AT91SAM9260_BASE_SDRAMC	0xffffea00
-#define AT91SAM9260_BASE_SMC	0xffffec00
-#define AT91SAM9260_BASE_MATRIX	0xffffee00
-#define AT91SAM9260_BASE_DBGU	AT91_BASE_DBGU0
-#define AT91SAM9260_BASE_PIOA	0xfffff400
-#define AT91SAM9260_BASE_PIOB	0xfffff600
-#define AT91SAM9260_BASE_PIOC	0xfffff800
-#define AT91SAM9260_BASE_RSTC	0xfffffd00
-#define AT91SAM9260_BASE_SHDWC	0xfffffd10
-#define AT91SAM9260_BASE_RTT	0xfffffd20
-#define AT91SAM9260_BASE_PIT	0xfffffd30
-#define AT91SAM9260_BASE_WDT	0xfffffd40
-#define AT91SAM9260_BASE_GPBR	0xfffffd50
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
-#define AT91SAM9260_SRAM_BASE	0x002FF000	/* Internal SRAM base address */
-#define AT91SAM9260_SRAM_SIZE	SZ_8K		/* Internal SRAM size (8Kb) */
-
-#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-#define AT91SAM9G20_SRAM_BASE	0x002FC000	/* Internal SRAM base address */
-#define AT91SAM9G20_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
-
-#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9260_matrix.h

@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	0x11C			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9261.h

@@ -1,99 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0	6	/* USART 0 */
-#define AT91SAM9261_ID_US1	7	/* USART 1 */
-#define AT91SAM9261_ID_US2	8	/* USART 2 */
-#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP	20	/* USB Host port */
-#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
-#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0		0xfffa0000
-#define AT91SAM9261_BASE_TC0		0xfffa0000
-#define AT91SAM9261_BASE_TC1		0xfffa0040
-#define AT91SAM9261_BASE_TC2		0xfffa0080
-#define AT91SAM9261_BASE_UDP		0xfffa4000
-#define AT91SAM9261_BASE_MCI		0xfffa8000
-#define AT91SAM9261_BASE_TWI		0xfffac000
-#define AT91SAM9261_BASE_US0		0xfffb0000
-#define AT91SAM9261_BASE_US1		0xfffb4000
-#define AT91SAM9261_BASE_US2		0xfffb8000
-#define AT91SAM9261_BASE_SSC0		0xfffbc000
-#define AT91SAM9261_BASE_SSC1		0xfffc0000
-#define AT91SAM9261_BASE_SSC2		0xfffc4000
-#define AT91SAM9261_BASE_SPI0		0xfffc8000
-#define AT91SAM9261_BASE_SPI1		0xfffcc000
-
-
-/*
- * System Peripherals
- */
-#define AT91SAM9261_BASE_SMC	0xffffec00
-#define AT91SAM9261_BASE_MATRIX	0xffffee00
-#define AT91SAM9261_BASE_SDRAMC	0xffffea00
-#define AT91SAM9261_BASE_DBGU	AT91_BASE_DBGU0
-#define AT91SAM9261_BASE_PIOA	0xfffff400
-#define AT91SAM9261_BASE_PIOB	0xfffff600
-#define AT91SAM9261_BASE_PIOC	0xfffff800
-#define AT91SAM9261_BASE_RSTC	0xfffffd00
-#define AT91SAM9261_BASE_SHDWC	0xfffffd10
-#define AT91SAM9261_BASE_RTT	0xfffffd20
-#define AT91SAM9261_BASE_PIT	0xfffffd30
-#define AT91SAM9261_BASE_WDT	0xfffffd40
-#define AT91SAM9261_BASE_GPBR	0xfffffd50
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
-
-#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
-#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
-
-#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
-#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
-
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9261_matrix.h

@@ -1,64 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	0x00			/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	0x04			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x08			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x0C			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x10			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x14			/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		0x24			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	0x30			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	0x34			/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9263.h

@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0	7	/* USART 0 */
-#define AT91SAM9263_ID_US1	8	/* USART 1 */
-#define AT91SAM9263_ID_US2	9	/* USART 2 */
-#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN	12	/* CAN */
-#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
-#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
-#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
-#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
-#define AT91SAM9263_ID_UHP	29	/* USB Host port */
-#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP		0xfff78000
-#define AT91SAM9263_BASE_TCB0		0xfff7c000
-#define AT91SAM9263_BASE_TC0		0xfff7c000
-#define AT91SAM9263_BASE_TC1		0xfff7c040
-#define AT91SAM9263_BASE_TC2		0xfff7c080
-#define AT91SAM9263_BASE_MCI0		0xfff80000
-#define AT91SAM9263_BASE_MCI1		0xfff84000
-#define AT91SAM9263_BASE_TWI		0xfff88000
-#define AT91SAM9263_BASE_US0		0xfff8c000
-#define AT91SAM9263_BASE_US1		0xfff90000
-#define AT91SAM9263_BASE_US2		0xfff94000
-#define AT91SAM9263_BASE_SSC0		0xfff98000
-#define AT91SAM9263_BASE_SSC1		0xfff9c000
-#define AT91SAM9263_BASE_AC97C		0xfffa0000
-#define AT91SAM9263_BASE_SPI0		0xfffa4000
-#define AT91SAM9263_BASE_SPI1		0xfffa8000
-#define AT91SAM9263_BASE_CAN		0xfffac000
-#define AT91SAM9263_BASE_PWMC		0xfffb8000
-#define AT91SAM9263_BASE_EMAC		0xfffbc000
-#define AT91SAM9263_BASE_ISI		0xfffc4000
-#define AT91SAM9263_BASE_2DGE		0xfffc8000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9263_BASE_ECC0	0xffffe000
-#define AT91SAM9263_BASE_SDRAMC0 0xffffe200
-#define AT91SAM9263_BASE_SMC0	0xffffe400
-#define AT91SAM9263_BASE_ECC1	0xffffe600
-#define AT91SAM9263_BASE_SDRAMC1 0xffffe800
-#define AT91SAM9263_BASE_SMC1	0xffffea00
-#define AT91SAM9263_BASE_MATRIX	0xffffec00
-#define AT91SAM9263_BASE_DBGU	AT91_BASE_DBGU1
-#define AT91SAM9263_BASE_PIOA	0xfffff200
-#define AT91SAM9263_BASE_PIOB	0xfffff400
-#define AT91SAM9263_BASE_PIOC	0xfffff600
-#define AT91SAM9263_BASE_PIOD	0xfffff800
-#define AT91SAM9263_BASE_PIOE	0xfffffa00
-#define AT91SAM9263_BASE_RSTC	0xfffffd00
-#define AT91SAM9263_BASE_SHDWC	0xfffffd10
-#define AT91SAM9263_BASE_RTT0	0xfffffd20
-#define AT91SAM9263_BASE_PIT	0xfffffd30
-#define AT91SAM9263_BASE_WDT	0xfffffd40
-#define AT91SAM9263_BASE_RTT1	0xfffffd50
-#define AT91SAM9263_BASE_GPBR	0xfffffd60
-
-#define AT91_SMC	AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
-#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
-#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
-
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9263_matrix.h

@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
- *
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-
-#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBI0CSA	0x120			/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MATRIX_EBI1CSA	0x124			/* EBI1 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9_smc.h

@@ -16,8 +16,6 @@
 #ifndef AT91SAM9_SMC_H
 #define AT91SAM9_SMC_H
 
-#include <mach/cpu.h>
-
 #ifndef __ASSEMBLY__
 struct sam9_smc_config {
 	/* Setup register */

arch/arm/mach-at91/include/mach/at91sam9g45.h

@@ -1,143 +0,0 @@
-/*
- * Chip-specific header file for the AT91SAM9G45 family
- *
- *  Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_H
-#define AT91SAM9G45_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
-#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
-#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
-#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
-#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
-#define AT91SAM9G45_ID_US0	7	/* USART 0 */
-#define AT91SAM9G45_ID_US1	8	/* USART 1 */
-#define AT91SAM9G45_ID_US2	9	/* USART 2 */
-#define AT91SAM9G45_ID_US3	10	/* USART 3 */
-#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
-#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
-#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
-#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
-#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
-#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
-#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
-#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
-#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
-#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
-#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
-#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
-#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
-#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
-#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
-#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
-#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
-#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9G45_BASE_UDPHS		0xfff78000
-#define AT91SAM9G45_BASE_TCB0		0xfff7c000
-#define AT91SAM9G45_BASE_TC0		0xfff7c000
-#define AT91SAM9G45_BASE_TC1		0xfff7c040
-#define AT91SAM9G45_BASE_TC2		0xfff7c080
-#define AT91SAM9G45_BASE_MCI0		0xfff80000
-#define AT91SAM9G45_BASE_TWI0		0xfff84000
-#define AT91SAM9G45_BASE_TWI1		0xfff88000
-#define AT91SAM9G45_BASE_US0		0xfff8c000
-#define AT91SAM9G45_BASE_US1		0xfff90000
-#define AT91SAM9G45_BASE_US2		0xfff94000
-#define AT91SAM9G45_BASE_US3		0xfff98000
-#define AT91SAM9G45_BASE_SSC0		0xfff9c000
-#define AT91SAM9G45_BASE_SSC1		0xfffa0000
-#define AT91SAM9G45_BASE_SPI0		0xfffa4000
-#define AT91SAM9G45_BASE_SPI1		0xfffa8000
-#define AT91SAM9G45_BASE_AC97C		0xfffac000
-#define AT91SAM9G45_BASE_TSC		0xfffb0000
-#define AT91SAM9G45_BASE_ISI		0xfffb4000
-#define AT91SAM9G45_BASE_PWMC		0xfffb8000
-#define AT91SAM9G45_BASE_EMAC		0xfffbc000
-#define AT91SAM9G45_BASE_AES		0xfffc0000
-#define AT91SAM9G45_BASE_TDES		0xfffc4000
-#define AT91SAM9G45_BASE_SHA		0xfffc8000
-#define AT91SAM9G45_BASE_TRNG		0xfffcc000
-#define AT91SAM9G45_BASE_MCI1		0xfffd0000
-#define AT91SAM9G45_BASE_TCB1		0xfffd4000
-#define AT91SAM9G45_BASE_TC3		0xfffd4000
-#define AT91SAM9G45_BASE_TC4		0xfffd4040
-#define AT91SAM9G45_BASE_TC5		0xfffd4080
-
-/*
- * System Peripherals
- */
-#define AT91SAM9G45_BASE_ECC	0xffffe200
-#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400
-#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600
-#define AT91SAM9G45_BASE_DMA	0xffffec00
-#define AT91SAM9G45_BASE_SMC	0xffffe800
-#define AT91SAM9G45_BASE_MATRIX	0xffffea00
-#define AT91SAM9G45_BASE_DBGU	AT91_BASE_DBGU1
-#define AT91SAM9G45_BASE_PIOA	0xfffff200
-#define AT91SAM9G45_BASE_PIOB	0xfffff400
-#define AT91SAM9G45_BASE_PIOC	0xfffff600
-#define AT91SAM9G45_BASE_PIOD	0xfffff800
-#define AT91SAM9G45_BASE_PIOE	0xfffffa00
-#define AT91SAM9G45_BASE_RSTC	0xfffffd00
-#define AT91SAM9G45_BASE_SHDWC	0xfffffd10
-#define AT91SAM9G45_BASE_RTT	0xfffffd20
-#define AT91SAM9G45_BASE_PIT	0xfffffd30
-#define AT91SAM9G45_BASE_WDT	0xfffffd40
-#define AT91SAM9G45_BASE_RTC	0xfffffdb0
-#define AT91SAM9G45_BASE_GPBR	0xfffffd60
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
-
-#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
-
-#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
-#define AT91SAM9G45_OHCI_BASE	0x00700000	/* USB Host controller (OHCI) */
-#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
-#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
-
-/*
- * DMA peripheral identifiers
- * for hardware handshaking interface
- */
-#define AT_DMA_ID_MCI0		 0
-#define AT_DMA_ID_SPI0_TX	 1
-#define AT_DMA_ID_SPI0_RX	 2
-#define AT_DMA_ID_SPI1_TX	 3
-#define AT_DMA_ID_SPI1_RX	 4
-#define AT_DMA_ID_SSC0_TX	 5
-#define AT_DMA_ID_SSC0_RX	 6
-#define AT_DMA_ID_SSC1_TX	 7
-#define AT_DMA_ID_SSC1_RX	 8
-#define AT_DMA_ID_AC97_TX	 9
-#define AT_DMA_ID_AC97_RX	10
-#define AT_DMA_ID_AES_TX	11
-#define AT_DMA_ID_AES_RX	12
-#define AT_DMA_ID_MCI1		13
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h

@@ -1,153 +0,0 @@
-/*
- * Matrix-centric header file for the AT91SAM9G45 family
- *
- *  Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_MATRIX_H
-#define AT91SAM9G45_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	0x24			/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	0x28			/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	0x2C			/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
-#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
-#define			AT91_MATRIX_ULBT_128		(7 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MATRIX_TCMR	0x110			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
-#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
-#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
-
-#define AT91_MATRIX_VIDEO	0x118			/* Video Mode Configuration Register */
-#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
-#define			AT91C_VDEC_SEL_OFF		(0 << 0)
-#define			AT91C_VDEC_SEL_ON		(1 << 0)
-
-#define AT91_MATRIX_EBICSA	0x128			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-
-#define AT91_MATRIX_WPMR	0x1E4			/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	0x1E8			/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9n12.h

@@ -1,65 +0,0 @@
-/*
- * SoC specific header file for the AT91SAM9N12
- *
- * Copyright (C) 2012 Atmel Corporation
- *
- * Common definitions, based on AT91SAM9N12 SoC datasheet
- *
- * Licensed under GPLv2 or later
- */
-
-#ifndef _AT91SAM9N12_H_
-#define _AT91SAM9N12_H_
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9N12_ID_PIOAB	2	/* Parallel I/O Controller A and B */
-#define AT91SAM9N12_ID_PIOCD	3	/* Parallel I/O Controller C and D */
-#define AT91SAM9N12_ID_FUSE	4	/* FUSE Controller */
-#define AT91SAM9N12_ID_USART0	5	/* USART 0 */
-#define AT91SAM9N12_ID_USART1	6	/* USART 1 */
-#define AT91SAM9N12_ID_USART2	7	/* USART 2 */
-#define AT91SAM9N12_ID_USART3	8	/* USART 3 */
-#define AT91SAM9N12_ID_TWI0	9	/* Two-Wire Interface 0 */
-#define AT91SAM9N12_ID_TWI1	10	/* Two-Wire Interface 1 */
-#define AT91SAM9N12_ID_MCI	12	/* High Speed Multimedia Card Interface */
-#define AT91SAM9N12_ID_SPI0	13	/* Serial Peripheral Interface 0 */
-#define AT91SAM9N12_ID_SPI1	14	/* Serial Peripheral Interface 1 */
-#define AT91SAM9N12_ID_UART0	15	/* UART 0 */
-#define AT91SAM9N12_ID_UART1	16	/* UART 1 */
-#define AT91SAM9N12_ID_TCB	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9N12_ID_PWM	18	/* Pulse Width Modulation Controller */
-#define AT91SAM9N12_ID_ADC	19	/* ADC Controller */
-#define AT91SAM9N12_ID_DMA	20	/* DMA Controller */
-#define AT91SAM9N12_ID_UHP	22	/* USB Host High Speed */
-#define AT91SAM9N12_ID_UDP	23	/* USB Device High Speed */
-#define AT91SAM9N12_ID_LCDC	25	/* LCD Controller */
-#define AT91SAM9N12_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9N12_ID_SSC	28	/* Synchronous Serial Controller */
-#define AT91SAM9N12_ID_TRNG	30	/* TRNG */
-#define AT91SAM9N12_ID_IRQ0	31	/* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9N12_BASE_USART0	0xf801c000
-#define AT91SAM9N12_BASE_USART1	0xf8020000
-#define AT91SAM9N12_BASE_USART2	0xf8024000
-#define AT91SAM9N12_BASE_USART3	0xf8028000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9N12_BASE_RTC	0xfffffeb0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9N12_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9N12_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
-
-#define AT91SAM9N12_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9N12_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h

@@ -1,53 +0,0 @@
-/*
- * Matrix-centric header file for the AT91SAM9N12
- *
- * Copyright (C) 2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _AT91SAM9N12_MATRIX_H_
-#define _AT91SAM9N12_MATRIX_H_
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x118)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
-#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
-#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
-#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
-#define			AT91_MATRIX_MP_OFF			(0 << 25)
-#define			AT91_MATRIX_MP_ON			(1 << 25)
-
-#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9rl.h

@@ -1,105 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0	6	/* USART 0 */
-#define AT91SAM9RL_ID_US1	7	/* USART 1 */
-#define AT91SAM9RL_ID_US2	8	/* USART 2 */
-#define AT91SAM9RL_ID_US3	9	/* USART 3 */
-#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
-#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
-#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
-#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
-#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0	0xfffa0000
-#define AT91SAM9RL_BASE_TC0	0xfffa0000
-#define AT91SAM9RL_BASE_TC1	0xfffa0040
-#define AT91SAM9RL_BASE_TC2	0xfffa0080
-#define AT91SAM9RL_BASE_MCI	0xfffa4000
-#define AT91SAM9RL_BASE_TWI0	0xfffa8000
-#define AT91SAM9RL_BASE_TWI1	0xfffac000
-#define AT91SAM9RL_BASE_US0	0xfffb0000
-#define AT91SAM9RL_BASE_US1	0xfffb4000
-#define AT91SAM9RL_BASE_US2	0xfffb8000
-#define AT91SAM9RL_BASE_US3	0xfffbc000
-#define AT91SAM9RL_BASE_SSC0	0xfffc0000
-#define AT91SAM9RL_BASE_SSC1	0xfffc4000
-#define AT91SAM9RL_BASE_PWMC	0xfffc8000
-#define AT91SAM9RL_BASE_SPI	0xfffcc000
-#define AT91SAM9RL_BASE_TSC	0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
-#define AT91SAM9RL_BASE_AC97C	0xfffd8000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91SAM9RL_BASE_DMA	0xffffe600
-#define AT91SAM9RL_BASE_ECC	0xffffe800
-#define AT91SAM9RL_BASE_SDRAMC	0xffffea00
-#define AT91SAM9RL_BASE_SMC	0xffffec00
-#define AT91SAM9RL_BASE_MATRIX	0xffffee00
-#define AT91SAM9RL_BASE_DBGU	AT91_BASE_DBGU0
-#define AT91SAM9RL_BASE_PIOA	0xfffff400
-#define AT91SAM9RL_BASE_PIOB	0xfffff600
-#define AT91SAM9RL_BASE_PIOC	0xfffff800
-#define AT91SAM9RL_BASE_PIOD	0xfffffa00
-#define AT91SAM9RL_BASE_RSTC	0xfffffd00
-#define AT91SAM9RL_BASE_SHDWC	0xfffffd10
-#define AT91SAM9RL_BASE_RTT	0xfffffd20
-#define AT91SAM9RL_BASE_PIT	0xfffffd30
-#define AT91SAM9RL_BASE_WDT	0xfffffd40
-#define AT91SAM9RL_BASE_GPBR	0xfffffd60
-#define AT91SAM9RL_BASE_RTC	0xfffffe00
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h

@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-
-#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBICSA	0x120			/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9x5.h

@@ -1,71 +0,0 @@
-/*
- * Chip-specific header file for the AT91SAM9x5 family
- *
- *  Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9x5 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_H
-#define AT91SAM9X5_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9X5_ID_PIOAB	2	/* Parallel I/O Controller A and B */
-#define AT91SAM9X5_ID_PIOCD	3	/* Parallel I/O Controller C and D */
-#define AT91SAM9X5_ID_SMD	4	/* SMD Soft Modem (SMD) */
-#define AT91SAM9X5_ID_USART0	5	/* USART 0 */
-#define AT91SAM9X5_ID_USART1	6	/* USART 1 */
-#define AT91SAM9X5_ID_USART2	7	/* USART 2 */
-#define AT91SAM9X5_ID_USART3	8	/* USART 3 */
-#define AT91SAM9X5_ID_TWI0	9	/* Two-Wire Interface 0 */
-#define AT91SAM9X5_ID_TWI1	10	/* Two-Wire Interface 1 */
-#define AT91SAM9X5_ID_TWI2	11	/* Two-Wire Interface 2 */
-#define AT91SAM9X5_ID_MCI0	12	/* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9X5_ID_SPI0	13	/* Serial Peripheral Interface 0 */
-#define AT91SAM9X5_ID_SPI1	14	/* Serial Peripheral Interface 1 */
-#define AT91SAM9X5_ID_UART0	15	/* UART 0 */
-#define AT91SAM9X5_ID_UART1	16	/* UART 1 */
-#define AT91SAM9X5_ID_TCB	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9X5_ID_PWM	18	/* Pulse Width Modulation Controller */
-#define AT91SAM9X5_ID_ADC	19	/* ADC Controller */
-#define AT91SAM9X5_ID_DMA0	20	/* DMA Controller 0 */
-#define AT91SAM9X5_ID_DMA1	21	/* DMA Controller 1 */
-#define AT91SAM9X5_ID_UHPHS	22	/* USB Host High Speed */
-#define AT91SAM9X5_ID_UDPHS	23	/* USB Device High Speed */
-#define AT91SAM9X5_ID_EMAC0	24	/* Ethernet MAC0 */
-#define AT91SAM9X5_ID_LCDC	25	/* LCD Controller */
-#define AT91SAM9X5_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9X5_ID_MCI1	26	/* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9X5_ID_EMAC1	27	/* Ethernet MAC1 */
-#define AT91SAM9X5_ID_SSC	28	/* Synchronous Serial Controller */
-#define AT91SAM9X5_ID_CAN0	29	/* CAN Controller 0 */
-#define AT91SAM9X5_ID_CAN1	30	/* CAN Controller 1 */
-#define AT91SAM9X5_ID_IRQ0	31	/* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9X5_BASE_USART0	0xf801c000
-#define AT91SAM9X5_BASE_USART1	0xf8020000
-#define AT91SAM9X5_BASE_USART2	0xf8024000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_RTC	0xfffffeb0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9X5_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
-
-#define AT91SAM9X5_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9X5_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h

@@ -1,53 +0,0 @@
-/*
- * Matrix-centric header file for the AT91SAM9x5 family
- *
- *  Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_MATRIX_H
-#define AT91SAM9X5_MATRIX_H
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
-#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
-#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
-#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
-#define			AT91_MATRIX_MP_OFF			(0 << 25)
-#define			AT91_MATRIX_MP_ON			(1 << 25)
-
-#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif

arch/arm/mach-at91/include/mach/cpu.h

@@ -1,216 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/cpu.h
- *
- * Copyright (C) 2006 SAN People
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __MACH_CPU_H__
-#define __MACH_CPU_H__
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-#define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G10	0x019903a0
-#define ARCH_ID_AT91SAM9G20	0x019905a0
-#define ARCH_ID_AT91SAM9RL64	0x019b03a0
-#define ARCH_ID_AT91SAM9G45	0x819b05a0
-#define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
-#define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
-#define ARCH_ID_AT91SAM9X5	0x819a05a0
-#define ARCH_ID_AT91SAM9N12	0x819a07a0
-
-#define ARCH_ID_AT91SAM9XE128	0x329973a0
-#define ARCH_ID_AT91SAM9XE256	0x329a93a0
-#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
-
-#define ARCH_ID_AT91M40800	0x14080044
-#define ARCH_ID_AT91R40807	0x44080746
-#define ARCH_ID_AT91M40807	0x14080745
-#define ARCH_ID_AT91R40008	0x44000840
-
-#define ARCH_ID_SAMA5		0x8A5C07C0
-
-#define ARCH_EXID_AT91SAM9M11	0x00000001
-#define ARCH_EXID_AT91SAM9M10	0x00000002
-#define ARCH_EXID_AT91SAM9G46	0x00000003
-#define ARCH_EXID_AT91SAM9G45	0x00000004
-
-#define ARCH_EXID_AT91SAM9G15	0x00000000
-#define ARCH_EXID_AT91SAM9G35	0x00000001
-#define ARCH_EXID_AT91SAM9X35	0x00000002
-#define ARCH_EXID_AT91SAM9G25	0x00000003
-#define ARCH_EXID_AT91SAM9X25	0x00000004
-
-#define ARCH_EXID_SAMA5D3	0x00004300
-#define ARCH_EXID_SAMA5D31	0x00444300
-#define ARCH_EXID_SAMA5D33	0x00414300
-#define ARCH_EXID_SAMA5D34	0x00414301
-#define ARCH_EXID_SAMA5D35	0x00584300
-#define ARCH_EXID_SAMA5D36	0x00004301
-
-#define ARCH_EXID_SAMA5D4	0x00000007
-#define ARCH_EXID_SAMA5D41	0x00000001
-#define ARCH_EXID_SAMA5D42	0x00000002
-#define ARCH_EXID_SAMA5D43	0x00000003
-#define ARCH_EXID_SAMA5D44	0x00000004
-
-#define ARCH_FAMILY_AT91SAM9	0x01900000
-#define ARCH_FAMILY_AT91SAM9XE	0x02900000
-
-/* RM9200 type */
-#define ARCH_REVISON_9200_BGA	(0 << 0)
-#define ARCH_REVISON_9200_PQFP	(1 << 0)
-
-#ifndef __ASSEMBLY__
-enum at91_soc_type {
-	/* 920T */
-	AT91_SOC_RM9200,
-
-	/* SAM92xx */
-	AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
-
-	/* SAM9Gxx */
-	AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45,
-
-	/* SAM9RL */
-	AT91_SOC_SAM9RL,
-
-	/* SAM9X5 */
-	AT91_SOC_SAM9X5,
-
-	/* SAM9N12 */
-	AT91_SOC_SAM9N12,
-
-	/* SAMA5D3 */
-	AT91_SOC_SAMA5D3,
-
-	/* SAMA5D4 */
-	AT91_SOC_SAMA5D4,
-
-	/* Unknown type */
-	AT91_SOC_UNKNOWN,
-};
-
-enum at91_soc_subtype {
-	/* RM9200 */
-	AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
-
-	/* SAM9260 */
-	AT91_SOC_SAM9XE,
-
-	/* SAM9G45 */
-	AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11,
-
-	/* SAM9X5 */
-	AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
-	AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
-
-	/* SAMA5D3 */
-	AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
-	AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36,
-
-	/* SAMA5D4 */
-	AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43,
-	AT91_SOC_SAMA5D44,
-
-	/* No subtype for this SoC */
-	AT91_SOC_SUBTYPE_NONE,
-
-	/* Unknown subtype */
-	AT91_SOC_SUBTYPE_UNKNOWN,
-};
-
-struct at91_socinfo {
-	unsigned int type, subtype;
-	unsigned int cidr, exid;
-};
-
-extern struct at91_socinfo at91_soc_initdata;
-const char *at91_get_soc_type(struct at91_socinfo *c);
-const char *at91_get_soc_subtype(struct at91_socinfo *c);
-
-static inline int at91_soc_is_detected(void)
-{
-	return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
-}
-
-#ifdef CONFIG_SOC_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_soc_initdata.type == AT91_SOC_RM9200)
-#define cpu_is_at91rm9200_bga()	(at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
-#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
-#else
-#define cpu_is_at91rm9200()	(0)
-#define cpu_is_at91rm9200_bga()	(0)
-#define cpu_is_at91rm9200_pqfp() (0)
-#endif
-
-#ifdef CONFIG_SOC_AT91SAM9
-#define cpu_is_at91sam9xe()	(at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
-#define cpu_is_at91sam9260()	(at91_soc_initdata.type == AT91_SOC_SAM9260)
-#define cpu_is_at91sam9g20()	(at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#define cpu_is_at91sam9261()	(at91_soc_initdata.type == AT91_SOC_SAM9261)
-#define cpu_is_at91sam9g10()	(at91_soc_initdata.type == AT91_SOC_SAM9G10)
-#define cpu_is_at91sam9263()	(at91_soc_initdata.type == AT91_SOC_SAM9263)
-#define cpu_is_at91sam9rl()	(at91_soc_initdata.type == AT91_SOC_SAM9RL)
-#define cpu_is_at91sam9g45()	(at91_soc_initdata.type == AT91_SOC_SAM9G45)
-#define cpu_is_at91sam9g45es()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
-#define cpu_is_at91sam9m10()	(at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
-#define cpu_is_at91sam9g46()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G46)
-#define cpu_is_at91sam9m11()	(at91_soc_initdata.subtype == AT91_SOC_SAM9M11)
-#define cpu_is_at91sam9x5()	(at91_soc_initdata.type == AT91_SOC_SAM9X5)
-#define cpu_is_at91sam9g15()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
-#define cpu_is_at91sam9g35()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
-#define cpu_is_at91sam9x35()	(at91_soc_initdata.subtype == AT91_SOC_SAM9X35)
-#define cpu_is_at91sam9g25()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G25)
-#define cpu_is_at91sam9x25()	(at91_soc_initdata.subtype == AT91_SOC_SAM9X25)
-#define cpu_is_at91sam9n12()	(at91_soc_initdata.type == AT91_SOC_SAM9N12)
-#else
-#define cpu_is_at91sam9xe()	(0)
-#define cpu_is_at91sam9260()	(0)
-#define cpu_is_at91sam9g20()	(0)
-#define cpu_is_at91sam9261()	(0)
-#define cpu_is_at91sam9g10()	(0)
-#define cpu_is_at91sam9263()	(0)
-#define cpu_is_at91sam9rl()	(0)
-#define cpu_is_at91sam9g45()	(0)
-#define cpu_is_at91sam9g45es()	(0)
-#define cpu_is_at91sam9m10()	(0)
-#define cpu_is_at91sam9g46()	(0)
-#define cpu_is_at91sam9m11()	(0)
-#define cpu_is_at91sam9x5()	(0)
-#define cpu_is_at91sam9g15()	(0)
-#define cpu_is_at91sam9g35()	(0)
-#define cpu_is_at91sam9x35()	(0)
-#define cpu_is_at91sam9g25()	(0)
-#define cpu_is_at91sam9x25()	(0)
-#define cpu_is_at91sam9n12()	(0)
-#endif
-
-#ifdef CONFIG_SOC_SAMA5D3
-#define cpu_is_sama5d3()	(at91_soc_initdata.type == AT91_SOC_SAMA5D3)
-#else
-#define cpu_is_sama5d3()	(0)
-#endif
-
-#ifdef CONFIG_SOC_SAMA5D4
-#define cpu_is_sama5d4()	(at91_soc_initdata.type == AT91_SOC_SAMA5D4)
-#else
-#define cpu_is_sama5d4()	(0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000()	(0)
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MACH_CPU_H__ */

arch/arm/mach-at91/include/mach/hardware.h

@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* DBGU base */
-/* rm9200, 9260/9g20, 9261/9g10, 9rl */
-#define AT91_BASE_DBGU0	0xfffff200
-/* 9263, 9g45, sama5d3 */
-#define AT91_BASE_DBGU1	0xffffee00
-/* sama5d4 */
-#define AT91_BASE_DBGU2	0xfc069000
-
-#include <mach/at91rm9200.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91sam9261.h>
-#include <mach/at91sam9263.h>
-#include <mach/at91sam9rl.h>
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9x5.h>
-#include <mach/at91sam9n12.h>
-#include <mach/sama5d3.h>
-#include <mach/sama5d4.h>
-
-/*
- * On all at91 except rm9200 and x40 have the System Controller starts
- * at address 0xffffc000 and has a size of 16KiB.
- *
- * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
- * at 0xfffff000
- *
- * Removes the individual definitions of AT91_BASE_SYS and
- * replaces them with a common version at base 0xfffffc000 and size 16KiB
- * and map the same memory space
- */
-#define AT91_BASE_SYS	0xffffc000
-
-/*
- * On sama5d4 there is no system controller, we map some needed peripherals
- */
-#define AT91_ALT_BASE_SYS	0xfc069000
-
-/*
- * On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
- */
-#define AT91_AIC	0xfffff000
-#define AT91_PMC	0xfffffc00
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000.  (544Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	IOMEM(0xFF000000 - AT91_IO_SIZE)
-
-/*
- * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000
- * to 0xFB069000 .. 0xFB06F000.  (24Kb)
- */
-#define AT91_ALT_IO_PHYS_BASE	AT91_ALT_BASE_SYS
-#define AT91_ALT_IO_VIRT_BASE	IOMEM(0xFB069000)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	IOMEM(AT91_IO_PHYS_BASE)
-
-#define AT91_ALT_IO_PHYS_BASE	AT91_ALT_BASE_SYS
-#define AT91_ALT_IO_VIRT_BASE	IOMEM(AT91_ALT_BASE_SYS)
-#endif
-
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-#define AT91_ALT_IO_P2V(x)	((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_ALT_VA_BASE_SYS	AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-/*
- * FIXME: this is needed to communicate between the pinctrl driver and
- * the PM implementation in the machine. Possibly part of the PM
- * implementation should be moved down into the pinctrl driver and get
- * called as part of the generic suspend/resume path.
- */
-#ifndef __ASSEMBLY__
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#endif
-
-#endif

arch/arm/mach-at91/include/mach/io.h

@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-#define __io(a)			__typesafe_io(a)
-
-#endif

arch/arm/mach-at91/include/mach/sama5d3.h

@@ -1,86 +0,0 @@
-/*
- * Chip-specific header file for the SAMA5D3 family
- *
- *  Copyright (C) 2013 Atmel,
- *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Common definitions.
- * Based on SAMA5D3 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef SAMA5D3_H
-#define SAMA5D3_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		 0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		 1	/* System Peripherals */
-#define SAMA5D3_ID_DBGU		 2	/* debug Unit (usually no special interrupt line) */
-#define AT91_ID_PIT		 3	/* PIT */
-#define SAMA5D3_ID_WDT		 4	/* Watchdog Timer Interrupt */
-#define SAMA5D3_ID_HSMC		 5	/* Static Memory Controller */
-#define SAMA5D3_ID_PIOA		 6	/* PIOA */
-#define SAMA5D3_ID_PIOB		 7	/* PIOB */
-#define SAMA5D3_ID_PIOC		 8	/* PIOC */
-#define SAMA5D3_ID_PIOD		 9	/* PIOD */
-#define SAMA5D3_ID_PIOE		10	/* PIOE */
-#define SAMA5D3_ID_SMD		11	/* SMD Soft Modem */
-#define SAMA5D3_ID_USART0	12	/* USART0 */
-#define SAMA5D3_ID_USART1	13	/* USART1 */
-#define SAMA5D3_ID_USART2	14	/* USART2 */
-#define SAMA5D3_ID_USART3	15	/* USART3 */
-#define SAMA5D3_ID_UART0	16	/* UART 0 */
-#define SAMA5D3_ID_UART1	17	/* UART 1 */
-#define SAMA5D3_ID_TWI0		18	/* Two-Wire Interface 0 */
-#define SAMA5D3_ID_TWI1		19	/* Two-Wire Interface 1 */
-#define SAMA5D3_ID_TWI2		20	/* Two-Wire Interface 2 */
-#define SAMA5D3_ID_HSMCI0	21	/* MCI */
-#define SAMA5D3_ID_HSMCI1	22	/* MCI */
-#define SAMA5D3_ID_HSMCI2	23	/* MCI */
-#define SAMA5D3_ID_SPI0		24	/* Serial Peripheral Interface 0 */
-#define SAMA5D3_ID_SPI1		25	/* Serial Peripheral Interface 1 */
-#define SAMA5D3_ID_TC0		26	/* Timer Counter 0 */
-#define SAMA5D3_ID_TC1		27	/* Timer Counter 2 */
-#define SAMA5D3_ID_PWM		28	/* Pulse Width Modulation Controller */
-#define SAMA5D3_ID_ADC		29	/* Touch Screen ADC Controller */
-#define SAMA5D3_ID_DMA0		30	/* DMA Controller 0 */
-#define SAMA5D3_ID_DMA1		31	/* DMA Controller 1 */
-#define SAMA5D3_ID_UHPHS	32	/* USB Host High Speed */
-#define SAMA5D3_ID_UDPHS	33	/* USB Device High Speed */
-#define SAMA5D3_ID_GMAC		34	/* Gigabit Ethernet MAC */
-#define SAMA5D3_ID_EMAC		35	/* Ethernet MAC */
-#define SAMA5D3_ID_LCDC		36	/* LCD Controller */
-#define SAMA5D3_ID_ISI		37	/* Image Sensor Interface */
-#define SAMA5D3_ID_SSC0		38	/* Synchronous Serial Controller 0 */
-#define SAMA5D3_ID_SSC1		39	/* Synchronous Serial Controller 1 */
-#define SAMA5D3_ID_CAN0		40	/* CAN Controller 0 */
-#define SAMA5D3_ID_CAN1		41	/* CAN Controller 1 */
-#define SAMA5D3_ID_SHA		42	/* Secure Hash Algorithm */
-#define SAMA5D3_ID_AES		43	/* Advanced Encryption Standard */
-#define SAMA5D3_ID_TDES		44	/* Triple Data Encryption Standard */
-#define SAMA5D3_ID_TRNG		45	/* True Random Generator Number */
-#define SAMA5D3_ID_IRQ0		47	/* Advanced Interrupt Controller (IRQ0) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define SAMA5D3_BASE_USART0	0xf001c000
-#define SAMA5D3_BASE_USART1	0xf0020000
-#define SAMA5D3_BASE_USART2	0xf8020000
-#define SAMA5D3_BASE_USART3	0xf8024000
-
-/*
- * System Peripherals
- */
-#define SAMA5D3_BASE_RTC	0xfffffeb0
-
-/*
- * Internal Memory
- */
-#define SAMA5D3_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define SAMA5D3_SRAM_SIZE	(128 * SZ_1K)	/* Internal SRAM size (128Kb) */
-
-#endif

arch/arm/mach-at91/include/mach/sama5d4.h

@@ -1,33 +0,0 @@
-/*
- * Chip-specific header file for the SAMA5D4 family
- *
- *  Copyright (C) 2013 Atmel Corporation,
- *                     Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Common definitions.
- * Based on SAMA5D4 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef SAMA5D4_H
-#define SAMA5D4_H
-
-/*
- * User Peripheral physical base addresses.
- */
-#define SAMA5D4_BASE_USART3	0xfc00c000 /* (USART3 non-secure) Base Address */
-#define SAMA5D4_BASE_PMC	0xf0018000 /* (PMC) Base Address */
-#define SAMA5D4_BASE_MPDDRC	0xf0010000 /* (MPDDRC) Base Address */
-#define SAMA5D4_BASE_PIOD	0xfc068000 /* (PIOD) Base Address */
-
-/* Some other peripherals */
-#define SAMA5D4_BASE_SYS2	SAMA5D4_BASE_PIOD
-
-/*
- * Internal Memory.
- */
-#define SAMA5D4_NS_SRAM_BASE     0x00210000      /* Internal SRAM base address Non-Secure */
-#define SAMA5D4_NS_SRAM_SIZE     (64 * SZ_1K)   /* Internal SRAM size Non-Secure part (64Kb) */
-
-#endif

arch/arm/mach-at91/include/mach/uncompress.h

@@ -1,218 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/uncompress.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <linux/atmel_serial.h>
-#include <mach/hardware.h>
-
-#include <mach/at91_dbgu.h>
-#include <mach/cpu.h>
-
-void __iomem *at91_uart;
-
-static const u32 uarts_rm9200[] = {
-	AT91_BASE_DBGU0,
-	AT91RM9200_BASE_US0,
-	AT91RM9200_BASE_US1,
-	AT91RM9200_BASE_US2,
-	AT91RM9200_BASE_US3,
-	0,
-};
-
-static const u32 uarts_sam9260[] = {
-	AT91_BASE_DBGU0,
-	AT91SAM9260_BASE_US0,
-	AT91SAM9260_BASE_US1,
-	AT91SAM9260_BASE_US2,
-	AT91SAM9260_BASE_US3,
-	AT91SAM9260_BASE_US4,
-	AT91SAM9260_BASE_US5,
-	0,
-};
-
-static const u32 uarts_sam9261[] = {
-	AT91_BASE_DBGU0,
-	AT91SAM9261_BASE_US0,
-	AT91SAM9261_BASE_US1,
-	AT91SAM9261_BASE_US2,
-	0,
-};
-
-static const u32 uarts_sam9263[] = {
-	AT91_BASE_DBGU1,
-	AT91SAM9263_BASE_US0,
-	AT91SAM9263_BASE_US1,
-	AT91SAM9263_BASE_US2,
-	0,
-};
-
-static const u32 uarts_sam9g45[] = {
-	AT91_BASE_DBGU1,
-	AT91SAM9G45_BASE_US0,
-	AT91SAM9G45_BASE_US1,
-	AT91SAM9G45_BASE_US2,
-	AT91SAM9G45_BASE_US3,
-	0,
-};
-
-static const u32 uarts_sam9rl[] = {
-	AT91_BASE_DBGU0,
-	AT91SAM9RL_BASE_US0,
-	AT91SAM9RL_BASE_US1,
-	AT91SAM9RL_BASE_US2,
-	AT91SAM9RL_BASE_US3,
-	0,
-};
-
-static const u32 uarts_sam9x5[] = {
-	AT91_BASE_DBGU0,
-	AT91SAM9X5_BASE_USART0,
-	AT91SAM9X5_BASE_USART1,
-	AT91SAM9X5_BASE_USART2,
-	0,
-};
-
-static const u32 uarts_sama5d3[] = {
-	AT91_BASE_DBGU1,
-	SAMA5D3_BASE_USART0,
-	SAMA5D3_BASE_USART1,
-	SAMA5D3_BASE_USART2,
-	SAMA5D3_BASE_USART3,
-	0,
-};
-
-static const u32 uarts_sama5d4[] = {
-	AT91_BASE_DBGU2,
-	SAMA5D4_BASE_USART3,
-	0,
-};
-
-static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
-{
-	u32 cidr, socid;
-
-	cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
-	socid = cidr & ~AT91_CIDR_VERSION;
-
-	switch (socid) {
-	case ARCH_ID_AT91RM9200:
-		return uarts_rm9200;
-
-	case ARCH_ID_AT91SAM9G20:
-	case ARCH_ID_AT91SAM9260:
-		return uarts_sam9260;
-
-	case ARCH_ID_AT91SAM9261:
-		return uarts_sam9261;
-
-	case ARCH_ID_AT91SAM9263:
-		return uarts_sam9263;
-
-	case ARCH_ID_AT91SAM9G45:
-		return uarts_sam9g45;
-
-	case ARCH_ID_AT91SAM9RL64:
-		return uarts_sam9rl;
-
-	case ARCH_ID_AT91SAM9N12:
-	case ARCH_ID_AT91SAM9X5:
-		return uarts_sam9x5;
-
-	case ARCH_ID_SAMA5:
-		cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID);
-		if (cidr & ARCH_EXID_SAMA5D3)
-			return uarts_sama5d3;
-		else if (cidr & ARCH_EXID_SAMA5D4)
-			return uarts_sama5d4;
-
-		break;
-	}
-
-	/* at91sam9g10 */
-	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
-		return uarts_sam9261;
-	}
-	/* at91sam9xe */
-	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
-		return uarts_sam9260;
-	}
-
-	return NULL;
-}
-
-static inline void arch_decomp_setup(void)
-{
-	int i = 0;
-	const u32* usarts;
-
-	usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
-	if (!usarts)
-		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
-	if (!usarts)
-		usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2);
-	if (!usarts) {
-		at91_uart = NULL;
-		return;
-	}
-
-	do {
-		/* physical address */
-		at91_uart = (void __iomem *)usarts[i];
-
-		if (__raw_readl(at91_uart + ATMEL_US_BRGR))
-			return;
-		i++;
-	} while (usarts[i]);
-
-	at91_uart = NULL;
-}
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	if (!at91_uart)
-		return;
-
-	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
-		barrier();
-	__raw_writel(c, at91_uart + ATMEL_US_THR);
-}
-
-static inline void flush(void)
-{
-	if (!at91_uart)
-		return;
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
-		barrier();
-}
-
-#endif

arch/arm/mach-at91/pm.c

@@ -29,19 +29,26 @@
 #include <linux/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-#include <mach/hardware.h>
+#include <asm/fncpy.h>
+#include <asm/cacheflush.h>
 
 #include "generic.h"
 #include "pm.h"
 
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+
 static struct {
 	unsigned long uhp_udp_mask;
 	int memctrl;
 } at91_pm_data;
 
-static void (*at91_pm_standby)(void);
 void __iomem *at91_ramc_base[2];
 
 static int at91_pm_valid_state(suspend_state_t state)
@@ -119,76 +126,67 @@ int at91_suspend_entering_slow_clock(void)
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
-
-static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
 			  void __iomem *ramc1, int memctrl);
 
-#ifdef CONFIG_AT91_SLOW_CLOCK
-extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
-extern u32 at91_slow_clock_sz;
-#endif
+extern u32 at91_pm_suspend_in_sram_sz;
+
+static void at91_pm_suspend(suspend_state_t state)
+{
+	unsigned int pm_data = at91_pm_data.memctrl;
+
+	pm_data |= (state == PM_SUSPEND_MEM) ?
+				AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+
+	flush_cache_all();
+	outer_disable();
+
+	at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
+				at91_ramc_base[1], pm_data);
+
+	outer_resume();
+}
 
 static int at91_pm_enter(suspend_state_t state)
 {
 	at91_pinctrl_gpio_suspend();
 
 	switch (state) {
+	/*
+	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+	 * drivers must suspend more deeply, the master clock switches
+	 * to the clk32k and turns off the main oscillator
+	 */
+	case PM_SUSPEND_MEM:
 		/*
-		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
-		 * drivers must suspend more deeply:  only the master clock
-		 * controller may be using the main oscillator.
+		 * Ensure that clocks are in a valid state.
 		 */
-		case PM_SUSPEND_MEM:
-			/*
-			 * Ensure that clocks are in a valid state.
-			 */
-			if (!at91_pm_verify_clocks())
-				goto error;
-
-			/*
-			 * Enter slow clock mode by switching over to clk32k and
-			 * turning off the main oscillator; reverse on wakeup.
-			 */
-			if (slow_clock) {
-#ifdef CONFIG_AT91_SLOW_CLOCK
-				/* copy slow_clock handler to SRAM, and call it */
-				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-#endif
-				slow_clock(at91_pmc_base, at91_ramc_base[0],
-					   at91_ramc_base[1],
-					   at91_pm_data.memctrl);
-				break;
-			} else {
-				pr_info("AT91: PM - no slow clock mode enabled ...\n");
-				/* FALLTHROUGH leaving master clock alone */
-			}
+		if (!at91_pm_verify_clocks())
+			goto error;
 
-		/*
-		 * STANDBY mode has *all* drivers suspended; ignores irqs not
-		 * marked as 'wakeup' event sources; and reduces DRAM power.
-		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
-		 * nothing fancy done with main or cpu clocks.
-		 */
-		case PM_SUSPEND_STANDBY:
-			/*
-			 * NOTE: the Wait-for-Interrupt instruction needs to be
-			 * in icache so no SDRAM accesses are needed until the
-			 * wakeup IRQ occurs and self-refresh is terminated.
-			 * For ARM 926 based chips, this requirement is weaker
-			 * as at91sam9 can access a RAM in self-refresh mode.
-			 */
-			if (at91_pm_standby)
-				at91_pm_standby();
-			break;
+		at91_pm_suspend(state);
 
-		case PM_SUSPEND_ON:
-			cpu_do_idle();
-			break;
+		break;
 
-		default:
-			pr_debug("AT91: PM - bogus suspend state %d\n", state);
-			goto error;
+	/*
+	 * STANDBY mode has *all* drivers suspended; ignores irqs not
+	 * marked as 'wakeup' event sources; and reduces DRAM power.
+	 * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
+	 * nothing fancy done with main or cpu clocks.
+	 */
+	case PM_SUSPEND_STANDBY:
+		at91_pm_suspend(state);
+		break;
+
+	case PM_SUSPEND_ON:
+		cpu_do_idle();
+		break;
+
+	default:
+		pr_debug("AT91: PM - bogus suspend state %d\n", state);
+		goto error;
 	}
 
 error:
@@ -218,12 +216,10 @@ static struct platform_device at91_cpuidle_device = {
 	.name = "cpuidle-at91",
 };
 
-void at91_pm_set_standby(void (*at91_standby)(void))
+static void at91_pm_set_standby(void (*at91_standby)(void))
 {
-	if (at91_standby) {
+	if (at91_standby)
 		at91_cpuidle_device.dev.platform_data = at91_standby;
-		at91_pm_standby = at91_standby;
-	}
 }
 
 static const struct of_device_id ramc_ids[] __initconst = {
@@ -263,60 +259,63 @@ static __init void at91_dt_ramc(void)
 	at91_pm_set_standby(standby);
 }
 
-#ifdef CONFIG_AT91_SLOW_CLOCK
 static void __init at91_pm_sram_init(void)
 {
 	struct gen_pool *sram_pool;
 	phys_addr_t sram_pbase;
 	unsigned long sram_base;
 	struct device_node *node;
-	struct platform_device *pdev;
+	struct platform_device *pdev = NULL;
 
-	node = of_find_compatible_node(NULL, NULL, "mmio-sram");
-	if (!node) {
-		pr_warn("%s: failed to find sram node!\n", __func__);
-		return;
+	for_each_compatible_node(node, NULL, "mmio-sram") {
+		pdev = of_find_device_by_node(node);
+		if (pdev) {
+			of_node_put(node);
+			break;
+		}
 	}
 
-	pdev = of_find_device_by_node(node);
 	if (!pdev) {
 		pr_warn("%s: failed to find sram device!\n", __func__);
-		goto put_node;
+		return;
 	}
 
 	sram_pool = dev_get_gen_pool(&pdev->dev);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		goto put_node;
+		return;
 	}
 
-	sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
+	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
-		pr_warn("%s: unable to alloc ocram!\n", __func__);
-		goto put_node;
+		pr_warn("%s: unable to alloc sram!\n", __func__);
+		return;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
-	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
+	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
+					at91_pm_suspend_in_sram_sz, false);
+	if (!at91_suspend_sram_fn) {
+		pr_warn("SRAM: Could not map\n");
+		return;
+	}
 
-put_node:
-	of_node_put(node);
+	/* Copy the pm suspend handler to SRAM */
+	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
+			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 }
-#endif
-
 
 static void __init at91_pm_init(void)
 {
-#ifdef CONFIG_AT91_SLOW_CLOCK
 	at91_pm_sram_init();
-#endif
-
-	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
 
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
-	suspend_set_ops(&at91_pm_ops);
+	if (at91_suspend_sram_fn)
+		suspend_set_ops(&at91_pm_ops);
+	else
+		pr_info("AT91: PM not supported, due to no SRAM allocated\n");
 }
 
 void __init at91rm9200_pm_init(void)

arch/arm/mach-at91/pm.h

@@ -15,11 +15,13 @@
 
 #include <mach/at91_ramc.h>
 
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
+#define	AT91_PM_MEMTYPE_MASK	0x0f
+
+#define	AT91_PM_MODE_OFFSET	4
+#define	AT91_PM_MODE_MASK	0x01
+#define	AT91_PM_MODE(x)		(((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
+
+#define	AT91_PM_SLOW_CLOCK	0x01
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -31,6 +33,7 @@ static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
  * still in self-refresh is "not recommended", but seems to work.
  */
 
+#ifndef __ASSEMBLY__
 static inline void at91rm9200_standby(void)
 {
 	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
@@ -44,7 +47,7 @@ static inline void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
 		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
 		  "r" (lpr));
 }
@@ -112,3 +115,4 @@ static inline void at91sam9_sdram_standby(void)
 }
 
 #endif
+#endif

arch/arm/mach-at91/pm_slowclock.S

@@ -1,323 +0,0 @@
-/*
- * arch/arm/mach-at91/pm_slow_clock.S
- *
- *  Copyright (C) 2006 Savin Zlobec
- *
- * AT91SAM9 support:
- *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/linkage.h>
-#include <linux/clk/at91_pmc.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-
-/*
- * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
- * clock during suspend by adjusting its prescalar and divisor.
- * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
- *       are errata regarding adjusting the prescalar and divisor.
- */
-#undef SLOWDOWN_MASTER_CLOCK
-
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
-pmc	.req	r0
-sdramc	.req	r1
-ramc1	.req	r2
-memctrl	.req	r3
-tmp1	.req	r4
-tmp2	.req	r5
-
-/*
- * Wait until master clock is ready (after switching master clock source)
- */
-	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MCKRDY
-	beq	1b
-2:
-	.endm
-
-/*
- * Wait until master oscillator has stabilized.
- */
-	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MOSCS
-	beq	1b
-2:
-	.endm
-
-/*
- * Wait until PLLA has locked.
- */
-	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKA
-	beq	1b
-2:
-	.endm
-
-/*
- * Wait until PLLB has locked.
- */
-	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKB
-	beq	1b
-2:
-	.endm
-
-	.text
-
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
- *			void __iomem *ramc1, int memctrl)
- */
-ENTRY(at91_slow_clock)
-	/* Save registers on stack */
-	stmfd	sp!, {r4 - r12, lr}
-
-	/*
-	 * Register usage:
-	 *  R0 = Base address of AT91_PMC
-	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R2 = Base address of second RAM Controller or 0 if not present
-	 *  R3 = Memory controller
-	 *  R4 = temporary register
-	 *  R5 = temporary register
-	 */
-
-	/* Drain write buffer */
-	mov	tmp1, #0
-	mcr	p15, 0, tmp1, c7, c10, 4
-
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	bne	ddr_sr_enable
-
-	/*
-	 * at91rm9200 Memory controller
-	 */
-	/* Put SDRAM in self-refresh mode */
-	mov	tmp1, #1
-	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
-	b	sdr_sr_done
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-ddr_sr_enable:
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_sr_enable
-
-	/* prepare for DDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	str	tmp1, .saved_sam9_lpr
-	bic	tmp1, #AT91_DDRSDRC_LPCB
-	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* figure out if we use the second ram controller */
-	cmp	ramc1, #0
-	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	strne	tmp2, .saved_sam9_lpr1
-	bicne	tmp2, #AT91_DDRSDRC_LPCB
-	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* Enable DDRAM self-refresh mode */
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
-	b	sdr_sr_done
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_sr_enable:
-	/* Enable SDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-	str	tmp1, .saved_sam9_lpr
-
-	bic	tmp1, #AT91_SDRAMC_LPCB
-	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-sdr_sr_done:
-	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
-	str	tmp1, .saved_mckr
-
-	/*
-	 * Set the Master clock source to slow clock
-	 */
-	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * Set the Master Clock PRES and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	mov	tmp1, #0
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
-	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
-	str	tmp1, .saved_pllar
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
-	str	tmp1, .saved_pllbr
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	/* Wait for interrupt */
-	mcr	p15, 0, tmp1, c7, c0, 4
-
-	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	wait_moscrdy
-
-	/* Restore PLLB setting */
-	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	1f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	2f
-1:
-	wait_pllblock
-2:
-
-	/* Restore PLLA setting */
-	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	3f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	4f
-3:
-	wait_pllalock
-4:
-
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * First set PRES if it was not 0,
-	 * than set CSS and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	ldr	tmp1, .saved_mckr
-	tst	tmp1, #AT91_PMC_PRES
-	beq	2f
-	and	tmp1, tmp1, #AT91_PMC_PRES
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
-	/*
-	 * Restore master clock setting
-	 */
-2:	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-	/*
-	 * at91rm9200 Memory controller
-	 * Do nothing - self-refresh is automatically disabled.
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	beq	ram_restored
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_en_restore
-	/* Restore LPR on AT91 with DDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
-	/* if we use the second ram controller */
-	cmp	ramc1, #0
-	ldrne	tmp2, .saved_sam9_lpr1
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
-	b	ram_restored
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_en_restore:
-	/* Restore LPR on AT91 with SDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-ram_restored:
-	/* Restore registers, and return */
-	ldmfd	sp!, {r4 - r12, pc}
-
-
-.saved_mckr:
-	.word 0
-
-.saved_pllar:
-	.word 0
-
-.saved_pllbr:
-	.word 0
-
-.saved_sam9_lpr:
-	.word 0
-
-.saved_sam9_lpr1:
-	.word 0
-
-ENTRY(at91_slow_clock_sz)
-	.word .-at91_slow_clock

arch/arm/mach-at91/pm_suspend.S

@@ -0,0 +1,337 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
+#include <mach/at91_ramc.h>
+#include "pm.h"
+
+#define	SRAMC_SELF_FRESH_ACTIVE		0x01
+#define	SRAMC_SELF_FRESH_EXIT		0x00
+
+pmc	.req	r0
+tmp1	.req	r4
+tmp2	.req	r5
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MCKRDY
+	beq	1b
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCS
+	beq	1b
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+	.endm
+
+/*
+ * Put the processor to enter the idle state
+ */
+	.macro at91_cpu_idle
+
+#if defined(CONFIG_CPU_V7)
+	mov	tmp1, #AT91_PMC_PCK
+	str	tmp1, [pmc, #AT91_PMC_SCDR]
+
+	dsb
+
+	wfi		@ Wait For Interrupt
+#else
+	mcr	p15, 0, tmp1, c7, c0, 4
+#endif
+
+	.endm
+
+	.text
+
+	.arm
+
+/*
+ * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
+ *			void __iomem *ramc1, int memctrl)
+ * @input param:
+ * 	@r0: base address of AT91_PMC
+ *  	@r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+ *	@r2: base address of second SDRAM Controller or 0 if not present
+ *	@r3: pm information
+ */
+ENTRY(at91_pm_suspend_in_sram)
+	/* Save registers on stack */
+	stmfd	sp!, {r4 - r12, lr}
+
+	/* Drain write buffer */
+	mov	tmp1, #0
+	mcr	p15, 0, tmp1, c7, c10, 4
+
+	str	r0, .pmc_base
+	str	r1, .sramc_base
+	str	r2, .sramc1_base
+
+	and	r0, r3, #AT91_PM_MEMTYPE_MASK
+	str	r0, .memtype
+
+	lsr	r0, r3, #AT91_PM_MODE_OFFSET
+	and	r0, r0, #AT91_PM_MODE_MASK
+	str	r0, .pm_mode
+
+	/* Active the self-refresh mode */
+	mov	r0, #SRAMC_SELF_FRESH_ACTIVE
+	bl	at91_sramc_self_refresh
+
+	ldr	r0, .pm_mode
+	tst	r0, #AT91_PM_SLOW_CLOCK
+	beq	skip_disable_main_clock
+
+	ldr	pmc, .pmc_base
+
+	/* Save Master clock setting */
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Turn off the main oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+skip_disable_main_clock:
+	ldr	pmc, .pmc_base
+
+	/* Wait for interrupt */
+	at91_cpu_idle
+
+	ldr	r0, .pm_mode
+	tst	r0, #AT91_PM_SLOW_CLOCK
+	beq	skip_enable_main_clock
+
+	ldr	pmc, .pmc_base
+
+	/* Turn on the main oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	/* Restore PLLA setting */
+	ldr	tmp1, .saved_pllar
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
+	bne	3f
+	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
+	beq	4f
+3:
+	wait_pllalock
+4:
+
+	/*
+	 * Restore master clock setting
+	 */
+	ldr	tmp1, .saved_mckr
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+skip_enable_main_clock:
+	/* Exit the self-refresh mode */
+	mov	r0, #SRAMC_SELF_FRESH_EXIT
+	bl	at91_sramc_self_refresh
+
+	/* Restore registers, and return */
+	ldmfd	sp!, {r4 - r12, pc}
+ENDPROC(at91_pm_suspend_in_sram)
+
+/*
+ * void at91_sramc_self_refresh(unsigned int is_active)
+ *
+ * @input param:
+ *	@r0: 1 - active self-refresh mode
+ *	     0 - exit self-refresh mode
+ * register usage:
+ * 	@r1: memory type
+ *	@r2: base address of the sram controller
+ */
+
+ENTRY(at91_sramc_self_refresh)
+	ldr	r1, .memtype
+	ldr	r2, .sramc_base
+
+	cmp	r1, #AT91_MEMCTRL_MC
+	bne	ddrc_sf
+
+	/*
+	 * at91rm9200 Memory controller
+	 */
+
+	 /*
+	  * For exiting the self-refresh mode, do nothing,
+	  * automatically exit the self-refresh mode.
+	  */
+	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
+	beq	exit_sramc_sf
+
+	/* Active SDRAM self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91RM9200_SDRAMC_SRR]
+	b	exit_sramc_sf
+
+ddrc_sf:
+	cmp	r1, #AT91_MEMCTRL_DDRSDR
+	bne	sdramc_sf
+
+	/*
+	 * DDR Memory controller
+	 */
+	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
+	beq	ddrc_exit_sf
+
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
+	str	r3, .saved_sam9_mdr
+	bic	r3, r3, #~AT91_DDRSDRC_MD
+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
+	biceq	r3, r3, #AT91_DDRSDRC_MD
+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
+
+	/* Active DDRC self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, r3, #AT91_DDRSDRC_LPCB
+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* If using the 2nd ddr controller */
+	ldr	r2, .sramc1_base
+	cmp	r2, #0
+	beq	no_2nd_ddrc
+
+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
+	str	r3, .saved_sam9_mdr1
+	bic	r3, r3, #~AT91_DDRSDRC_MD
+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
+	biceq	r3, r3, #AT91_DDRSDRC_MD
+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
+
+	/* Active DDRC self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr1
+	bic	r3, r3, #AT91_DDRSDRC_LPCB
+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+no_2nd_ddrc:
+	b	exit_sramc_sf
+
+ddrc_exit_sf:
+	/* Restore MDR in case of LPDDR1 */
+	ldr	r3, .saved_sam9_mdr
+	str	r3, [r2, #AT91_DDRSDRC_MDR]
+	/* Restore LPR on AT91 with DDRAM */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* If using the 2nd ddr controller */
+	ldr	r2, .sramc1_base
+	cmp	r2, #0
+	ldrne	r3, .saved_sam9_mdr1
+	strne	r3, [r2, #AT91_DDRSDRC_MDR]
+	ldrne	r3, .saved_sam9_lpr1
+	strne	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	b	exit_sramc_sf
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdramc_sf:
+	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
+	beq	sdramc_exit_sf
+
+	/* Active SDRAMC self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, r3, #AT91_SDRAMC_LPCB
+	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+sdramc_exit_sf:
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+exit_sramc_sf:
+	mov	pc, lr
+ENDPROC(at91_sramc_self_refresh)
+
+.pmc_base:
+	.word 0
+.sramc_base:
+	.word 0
+.sramc1_base:
+	.word 0
+.memtype:
+	.word 0
+.pm_mode:
+	.word 0
+.saved_mckr:
+	.word 0
+.saved_pllar:
+	.word 0
+.saved_sam9_lpr:
+	.word 0
+.saved_sam9_lpr1:
+	.word 0
+.saved_sam9_mdr:
+	.word 0
+.saved_sam9_mdr1:
+	.word 0
+
+ENTRY(at91_pm_suspend_in_sram_sz)
+	.word .-at91_pm_suspend_in_sram

arch/arm/mach-at91/sama5.c

@@ -7,48 +7,48 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/micrel_phy.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/clk-provider.h>
-#include <linux/phy.h>
 
-#include <mach/hardware.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 
 #include "generic.h"
+#include "soc.h"
 
-static int ksz8081_phy_fixup(struct phy_device *phy)
-{
-	int value;
-
-	value = phy_read(phy, 0x16);
-	value &= ~0x20;
-	phy_write(phy, 0x16, value);
-
-	return 0;
-}
+static const struct at91_soc sama5_socs[] = {
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
+		 "sama5d31", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
+		 "sama5d33", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
+		 "sama5d34", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
+		 "sama5d35", "sama5d3"),
+	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
+		 "sama5d36", "sama5d3"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
+		 "sama5d41", "sama5d4"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
+		 "sama5d42", "sama5d4"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
+		 "sama5d43", "sama5d4"),
+	AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
+		 "sama5d44", "sama5d4"),
+	{ /* sentinel */ },
+};
 
 static void __init sama5_dt_device_init(void)
 {
-	if (of_machine_is_compatible("atmel,sama5d4ek") &&
-	   IS_ENABLED(CONFIG_PHYLIB)) {
-		phy_register_fixup_for_id("fc028000.etherne:00",
-						ksz8081_phy_fixup);
-	}
+	struct soc_device *soc;
+	struct device *soc_dev = NULL;
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	soc = at91_soc_init(sama5_socs);
+	if (soc != NULL)
+		soc_dev = soc_device_to_device(soc);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 	at91sam9x5_pm_init();
 }
 
@@ -59,44 +59,10 @@ static const char *sama5_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
 	/* Maintainer: Atmel */
-	.map_io		= at91_map_io,
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
 
-static struct map_desc at91_io_desc[] __initdata = {
-	{
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
-	.length         = SZ_512,
-	.type           = MT_DEVICE,
-	},
-	{
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_PMC),
-	.length         = SZ_512,
-	.type           = MT_DEVICE,
-	},
-	{ /* On sama5d4, we use USART3 as serial console */
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_USART3),
-	.length         = SZ_256,
-	.type           = MT_DEVICE,
-	},
-	{ /* A bunch of peripheral with fine grained IO space */
-	.virtual        = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
-	.pfn            = __phys_to_pfn(SAMA5D4_BASE_SYS2),
-	.length         = SZ_2K,
-	.type           = MT_DEVICE,
-	},
-};
-
-static void __init sama5_alt_map_io(void)
-{
-	at91_alt_map_io();
-	iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
-}
-
 static const char *sama5_alt_dt_board_compat[] __initconst = {
 	"atmel,sama5d4",
 	NULL
@@ -104,7 +70,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
 	/* Maintainer: Atmel */
-	.map_io		= sama5_alt_map_io,
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_alt_dt_board_compat,
 	.l2c_aux_mask	= ~0UL,

arch/arm/mach-at91/setup.c

@@ -1,330 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#define pr_fmt(fmt)	"AT91: " fmt
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-#include <mach/at91_dbgu.h>
-
-#include "generic.h"
-#include "pm.h"
-
-struct at91_socinfo at91_soc_initdata;
-EXPORT_SYMBOL(at91_soc_initdata);
-
-static struct map_desc at91_io_desc __initdata __maybe_unused = {
-	.virtual	= (unsigned long)AT91_VA_BASE_SYS,
-	.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-	.length		= SZ_16K,
-	.type		= MT_DEVICE,
-};
-
-static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
-	.virtual	= (unsigned long)AT91_ALT_VA_BASE_SYS,
-	.pfn		= __phys_to_pfn(AT91_ALT_BASE_SYS),
-	.length		= 24 * SZ_1K,
-	.type		= MT_DEVICE,
-};
-
-static void __init soc_detect(u32 dbgu_base)
-{
-	u32 cidr, socid;
-
-	cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
-	socid = cidr & ~AT91_CIDR_VERSION;
-
-	switch (socid) {
-	case ARCH_ID_AT91RM9200:
-		at91_soc_initdata.type = AT91_SOC_RM9200;
-		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
-			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-		break;
-
-	case ARCH_ID_AT91SAM9260:
-		at91_soc_initdata.type = AT91_SOC_SAM9260;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9261:
-		at91_soc_initdata.type = AT91_SOC_SAM9261;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9263:
-		at91_soc_initdata.type = AT91_SOC_SAM9263;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9G20:
-		at91_soc_initdata.type = AT91_SOC_SAM9G20;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9G45:
-		at91_soc_initdata.type = AT91_SOC_SAM9G45;
-		if (cidr == ARCH_ID_AT91SAM9G45ES)
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
-		break;
-
-	case ARCH_ID_AT91SAM9RL64:
-		at91_soc_initdata.type = AT91_SOC_SAM9RL;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-		break;
-
-	case ARCH_ID_AT91SAM9X5:
-		at91_soc_initdata.type = AT91_SOC_SAM9X5;
-		break;
-
-	case ARCH_ID_AT91SAM9N12:
-		at91_soc_initdata.type = AT91_SOC_SAM9N12;
-		break;
-
-	case ARCH_ID_SAMA5:
-		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
-			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
-		}
-		break;
-	}
-
-	/* at91sam9g10 */
-	if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
-		at91_soc_initdata.type = AT91_SOC_SAM9G10;
-		at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-	}
-	/* at91sam9xe */
-	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
-		at91_soc_initdata.type = AT91_SOC_SAM9260;
-		at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
-	}
-
-	if (!at91_soc_is_detected())
-		return;
-
-	at91_soc_initdata.cidr = cidr;
-
-	/* sub version of soc */
-	if (!at91_soc_initdata.exid)
-		at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
-	if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_AT91SAM9M10:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
-			break;
-		case ARCH_EXID_AT91SAM9G46:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
-			break;
-		case ARCH_EXID_AT91SAM9M11:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
-			break;
-		}
-	}
-
-	if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_AT91SAM9G15:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
-			break;
-		case ARCH_EXID_AT91SAM9G35:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
-			break;
-		case ARCH_EXID_AT91SAM9X35:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
-			break;
-		case ARCH_EXID_AT91SAM9G25:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
-			break;
-		case ARCH_EXID_AT91SAM9X25:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
-			break;
-		}
-	}
-
-	if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_SAMA5D31:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
-			break;
-		case ARCH_EXID_SAMA5D33:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
-			break;
-		case ARCH_EXID_SAMA5D34:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
-			break;
-		case ARCH_EXID_SAMA5D35:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
-			break;
-		case ARCH_EXID_SAMA5D36:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
-			break;
-		}
-	}
-}
-
-static void __init alt_soc_detect(u32 dbgu_base)
-{
-	u32 cidr, socid;
-
-	/* SoC ID */
-	cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
-	socid = cidr & ~AT91_CIDR_VERSION;
-
-	switch (socid) {
-	case ARCH_ID_SAMA5:
-		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-		if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
-			at91_soc_initdata.type = AT91_SOC_SAMA5D3;
-		} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
-			at91_soc_initdata.type = AT91_SOC_SAMA5D4;
-		}
-		break;
-	}
-
-	if (!at91_soc_is_detected())
-		return;
-
-	at91_soc_initdata.cidr = cidr;
-
-	/* sub version of soc */
-	if (!at91_soc_initdata.exid)
-		at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
-	if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_SAMA5D41:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
-			break;
-		case ARCH_EXID_SAMA5D42:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
-			break;
-		case ARCH_EXID_SAMA5D43:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
-			break;
-		case ARCH_EXID_SAMA5D44:
-			at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
-			break;
-		}
-	}
-}
-
-static const char *soc_name[] = {
-	[AT91_SOC_RM9200]	= "at91rm9200",
-	[AT91_SOC_SAM9260]	= "at91sam9260",
-	[AT91_SOC_SAM9261]	= "at91sam9261",
-	[AT91_SOC_SAM9263]	= "at91sam9263",
-	[AT91_SOC_SAM9G10]	= "at91sam9g10",
-	[AT91_SOC_SAM9G20]	= "at91sam9g20",
-	[AT91_SOC_SAM9G45]	= "at91sam9g45",
-	[AT91_SOC_SAM9RL]	= "at91sam9rl",
-	[AT91_SOC_SAM9X5]	= "at91sam9x5",
-	[AT91_SOC_SAM9N12]	= "at91sam9n12",
-	[AT91_SOC_SAMA5D3]	= "sama5d3",
-	[AT91_SOC_SAMA5D4]	= "sama5d4",
-	[AT91_SOC_UNKNOWN]	= "Unknown",
-};
-
-const char *at91_get_soc_type(struct at91_socinfo *c)
-{
-	return soc_name[c->type];
-}
-EXPORT_SYMBOL(at91_get_soc_type);
-
-static const char *soc_subtype_name[] = {
-	[AT91_SOC_RM9200_BGA]	= "at91rm9200 BGA",
-	[AT91_SOC_RM9200_PQFP]	= "at91rm9200 PQFP",
-	[AT91_SOC_SAM9XE]	= "at91sam9xe",
-	[AT91_SOC_SAM9G45ES]	= "at91sam9g45es",
-	[AT91_SOC_SAM9M10]	= "at91sam9m10",
-	[AT91_SOC_SAM9G46]	= "at91sam9g46",
-	[AT91_SOC_SAM9M11]	= "at91sam9m11",
-	[AT91_SOC_SAM9G15]	= "at91sam9g15",
-	[AT91_SOC_SAM9G35]	= "at91sam9g35",
-	[AT91_SOC_SAM9X35]	= "at91sam9x35",
-	[AT91_SOC_SAM9G25]	= "at91sam9g25",
-	[AT91_SOC_SAM9X25]	= "at91sam9x25",
-	[AT91_SOC_SAMA5D31]	= "sama5d31",
-	[AT91_SOC_SAMA5D33]	= "sama5d33",
-	[AT91_SOC_SAMA5D34]	= "sama5d34",
-	[AT91_SOC_SAMA5D35]	= "sama5d35",
-	[AT91_SOC_SAMA5D36]	= "sama5d36",
-	[AT91_SOC_SAMA5D41]	= "sama5d41",
-	[AT91_SOC_SAMA5D42]	= "sama5d42",
-	[AT91_SOC_SAMA5D43]	= "sama5d43",
-	[AT91_SOC_SAMA5D44]	= "sama5d44",
-	[AT91_SOC_SUBTYPE_NONE]	= "None",
-	[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
-};
-
-const char *at91_get_soc_subtype(struct at91_socinfo *c)
-{
-	return soc_subtype_name[c->subtype];
-}
-EXPORT_SYMBOL(at91_get_soc_subtype);
-
-void __init at91_map_io(void)
-{
-	/* Map peripherals */
-	iotable_init(&at91_io_desc, 1);
-
-	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
-	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
-
-	soc_detect(AT91_BASE_DBGU0);
-	if (!at91_soc_is_detected())
-		soc_detect(AT91_BASE_DBGU1);
-
-	if (!at91_soc_is_detected())
-		panic(pr_fmt("Impossible to detect the SOC type"));
-
-	pr_info("Detected soc type: %s\n",
-		at91_get_soc_type(&at91_soc_initdata));
-	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
-		pr_info("Detected soc subtype: %s\n",
-			at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __init at91_alt_map_io(void)
-{
-	/* Map peripherals */
-	iotable_init(&at91_alt_io_desc, 1);
-
-	at91_soc_initdata.type = AT91_SOC_UNKNOWN;
-	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
-
-	alt_soc_detect(AT91_BASE_DBGU2);
-	if (!at91_soc_is_detected())
-		panic("AT91: Impossible to detect the SOC type");
-
-	pr_info("AT91: Detected soc type: %s\n",
-		at91_get_soc_type(&at91_soc_initdata));
-	if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
-		pr_info("AT91: Detected soc subtype: %s\n",
-			at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __iomem *at91_matrix_base;
-EXPORT_SYMBOL_GPL(at91_matrix_base);
-
-void __init at91_ioremap_matrix(u32 base_addr)
-{
-	at91_matrix_base = ioremap(base_addr, 512);
-	if (!at91_matrix_base)
-		panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
-}

arch/arm/mach-at91/soc.c

@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#define pr_fmt(fmt)	"AT91: " fmt
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include "soc.h"
+
+#define AT91_DBGU_CIDR			0x40
+#define AT91_DBGU_CIDR_VERSION(x)	((x) & 0x1f)
+#define AT91_DBGU_CIDR_EXT		BIT(31)
+#define AT91_DBGU_CIDR_MATCH_MASK	0x7fffffe0
+#define AT91_DBGU_EXID			0x44
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	const struct at91_soc *soc;
+	struct soc_device *soc_dev;
+	struct device_node *np;
+	void __iomem *regs;
+	u32 cidr, exid;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL,
+					     "atmel,at91sam9260-dbgu");
+
+	if (!np) {
+		pr_warn("Could not find DBGU node");
+		return NULL;
+	}
+
+	regs = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!regs) {
+		pr_warn("Could not map DBGU iomem range");
+		return NULL;
+	}
+
+	cidr = readl(regs + AT91_DBGU_CIDR);
+	exid = readl(regs + AT91_DBGU_EXID);
+
+	iounmap(regs);
+
+	for (soc = socs; soc->name; soc++) {
+		if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+			continue;
+
+		if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+			break;
+	}
+
+	if (!soc->name) {
+		pr_warn("Could not find matching SoC description\n");
+		return NULL;
+	}
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return NULL;
+
+	soc_dev_attr->family = soc->family;
+	soc_dev_attr->soc_id = soc->name;
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
+					   AT91_DBGU_CIDR_VERSION(cidr));
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr);
+		pr_warn("Could not register SoC device\n");
+		return NULL;
+	}
+
+	if (soc->family)
+		pr_info("Detected SoC family: %s\n", soc->family);
+	pr_info("Detected SoC: %s, revision %X\n", soc->name,
+		AT91_DBGU_CIDR_VERSION(cidr));
+
+	return soc_dev;
+}

arch/arm/mach-at91/soc.h

@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2015 Atmel
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#ifndef __AT91_SOC_H
+#define __AT91_SOC_H
+
+#include <linux/sys_soc.h>
+
+struct at91_soc {
+	u32 cidr_match;
+	u32 exid_match;
+	const char *name;
+	const char *family;
+};
+
+#define AT91_SOC(__cidr, __exid, __name, __family)		\
+	{							\
+		.cidr_match = (__cidr),				\
+		.exid_match = (__exid),				\
+		.name = (__name),				\
+		.family = (__family),				\
+	}
+
+struct soc_device * __init
+at91_soc_init(const struct at91_soc *socs);
+
+#define AT91RM9200_CIDR_MATCH		0x09290780
+
+#define AT91SAM9260_CIDR_MATCH		0x019803a0
+#define AT91SAM9261_CIDR_MATCH		0x019703a0
+#define AT91SAM9263_CIDR_MATCH		0x019607a0
+#define AT91SAM9G20_CIDR_MATCH		0x019905a0
+#define AT91SAM9RL64_CIDR_MATCH		0x019b03a0
+#define AT91SAM9G45_CIDR_MATCH		0x019b05a0
+#define AT91SAM9X5_CIDR_MATCH		0x019a05a0
+#define AT91SAM9N12_CIDR_MATCH		0x019a07a0
+
+#define AT91SAM9M11_EXID_MATCH		0x00000001
+#define AT91SAM9M10_EXID_MATCH		0x00000002
+#define AT91SAM9G46_EXID_MATCH		0x00000003
+#define AT91SAM9G45_EXID_MATCH		0x00000004
+
+#define AT91SAM9G15_EXID_MATCH		0x00000000
+#define AT91SAM9G35_EXID_MATCH		0x00000001
+#define AT91SAM9X35_EXID_MATCH		0x00000002
+#define AT91SAM9G25_EXID_MATCH		0x00000003
+#define AT91SAM9X25_EXID_MATCH		0x00000004
+
+#define AT91SAM9CN12_EXID_MATCH		0x00000005
+#define AT91SAM9N12_EXID_MATCH		0x00000006
+#define AT91SAM9CN11_EXID_MATCH		0x00000009
+
+#define AT91SAM9XE128_CIDR_MATCH	0x329973a0
+#define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
+#define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
+
+#define SAMA5D3_CIDR_MATCH		0x0a5c07c0
+#define SAMA5D31_EXID_MATCH		0x00444300
+#define SAMA5D33_EXID_MATCH		0x00414300
+#define SAMA5D34_EXID_MATCH		0x00414301
+#define SAMA5D35_EXID_MATCH		0x00584300
+#define SAMA5D36_EXID_MATCH		0x00004301
+
+#define SAMA5D4_CIDR_MATCH		0x0a5c07c0
+#define SAMA5D41_EXID_MATCH		0x00000001
+#define SAMA5D42_EXID_MATCH		0x00000002
+#define SAMA5D43_EXID_MATCH		0x00000003
+#define SAMA5D44_EXID_MATCH		0x00000004
+
+#endif /* __AT91_SOC_H */

drivers/clocksource/Kconfig

@@ -143,6 +143,10 @@ config ATMEL_PIT
 	select CLKSRC_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
+config ATMEL_ST
+	bool
+	select CLKSRC_OF
+
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help

drivers/clocksource/Makefile

@@ -1,5 +1,6 @@
 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
+obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o

arch/arm/mach-at91/at91rm9200_time.c → drivers/clocksource/timer-atmel-st.c

@@ -24,19 +24,17 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/export.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/at91_st.h>
-#include <mach/hardware.h>
+#include <linux/regmap.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
 static struct clock_event_device clkevt;
+static struct regmap *regmap_st;
 
+#define AT91_SLOW_CLOCK		32768
 #define RM9200_TIMER_LATCH	((AT91_SLOW_CLOCK + HZ/2) / HZ)
 
 /*
@@ -46,11 +44,11 @@ static struct clock_event_device clkevt;
  */
 static inline unsigned long read_CRTR(void)
 {
-	unsigned long x1, x2;
+	unsigned int x1, x2;
 
-	x1 = at91_st_read(AT91_ST_CRTR);
+	regmap_read(regmap_st, AT91_ST_CRTR, &x1);
 	do {
-		x2 = at91_st_read(AT91_ST_CRTR);
+		regmap_read(regmap_st, AT91_ST_CRTR, &x2);
 		if (x1 == x2)
 			break;
 		x1 = x2;
@@ -63,7 +61,10 @@ static inline unsigned long read_CRTR(void)
  */
 static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
-	u32	sr = at91_st_read(AT91_ST_SR) & irqmask;
+	u32 sr;
+
+	regmap_read(regmap_st, AT91_ST_SR, &sr);
+	sr &= irqmask;
 
 	/*
 	 * irqs should be disabled here, but as the irq is shared they are only
@@ -92,13 +93,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct irqaction at91rm9200_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91rm9200_timer_interrupt,
-	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
-};
-
 static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
@@ -115,23 +109,25 @@ static struct clocksource clk32k = {
 static void
 clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
+	unsigned int val;
+
 	/* Disable and flush pending timer interrupts */
-	at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
+	regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
 
 	last_crtr = read_CRTR();
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* PIT for periodic irqs; fixed rate of 1/HZ */
 		irqmask = AT91_ST_PITS;
-		at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
+		regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* ALM for oneshot irqs, set by next_event()
 		 * before 32 seconds have passed
 		 */
 		irqmask = AT91_ST_ALMS;
-		at91_st_write(AT91_ST_RTAR, last_crtr);
+		regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -139,7 +135,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 		irqmask = 0;
 		break;
 	}
-	at91_st_write(AT91_ST_IER, irqmask);
+	regmap_write(regmap_st, AT91_ST_IER, irqmask);
 }
 
 static int
@@ -147,6 +143,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
 	u32		alm;
 	int		status = 0;
+	unsigned int	val;
 
 	BUG_ON(delta < 2);
 
@@ -162,12 +159,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	alm = read_CRTR();
 
 	/* Cancel any pending alarm; flush any pending IRQ */
-	at91_st_write(AT91_ST_RTAR, alm);
-	at91_st_read(AT91_ST_SR);
+	regmap_write(regmap_st, AT91_ST_RTAR, alm);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
 
 	/* Schedule alarm by writing RTAR. */
 	alm += delta;
-	at91_st_write(AT91_ST_RTAR, alm);
+	regmap_write(regmap_st, AT91_ST_RTAR, alm);
 
 	return status;
 }
@@ -180,66 +177,40 @@ static struct clock_event_device clkevt = {
 	.set_mode	= clkevt32k_mode,
 };
 
-void __iomem *at91_st_base;
-EXPORT_SYMBOL_GPL(at91_st_base);
-
-static const struct of_device_id at91rm9200_st_timer_ids[] = {
-	{ .compatible = "atmel,at91rm9200-st" },
-	{ /* sentinel */ }
-};
-
-static int __init of_at91rm9200_st_init(void)
-{
-	struct device_node *np;
-	int ret;
-
-	np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
-	if (!np)
-		goto err;
-
-	at91_st_base = of_iomap(np, 0);
-	if (!at91_st_base)
-		goto node_err;
-
-	/* Get the interrupts property */
-	ret = irq_of_parse_and_map(np, 0);
-	if (!ret)
-		goto ioremap_err;
-	at91rm9200_timer_irq.irq = ret;
-
-	of_node_put(np);
-
-	return 0;
-
-ioremap_err:
-	iounmap(at91_st_base);
-node_err:
-	of_node_put(np);
-err:
-	return -EINVAL;
-}
-
 /*
  * ST (system timer) module supports both clockevents and clocksource.
  */
-void __init at91rm9200_timer_init(void)
+static void __init atmel_st_timer_init(struct device_node *node)
 {
-	/* For device tree enabled device: initialize here */
-	of_at91rm9200_st_init();
+	unsigned int val;
+	int irq, ret;
+
+	regmap_st = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap_st))
+		panic(pr_fmt("Unable to get regmap\n"));
 
 	/* Disable all timer interrupts, and clear any pending ones */
-	at91_st_write(AT91_ST_IDR,
+	regmap_write(regmap_st, AT91_ST_IDR,
 		AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
+
+	/* Get the interrupts property */
+	irq  = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		panic(pr_fmt("Unable to get IRQ from DT\n"));
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
+	ret = request_irq(irq, at91rm9200_timer_interrupt,
+			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+			  "at91_tick", regmap_st);
+	if (ret)
+		panic(pr_fmt("Unable to setup IRQ\n"));
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting
 	 * its prescaler from the 1 Hz default.
 	 */
-	at91_st_write(AT91_ST_RTMR, 1);
+	regmap_write(regmap_st, AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
 	clkevt.cpumask = cpumask_of(0);
@@ -249,3 +220,5 @@ void __init at91rm9200_timer_init(void)
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
+CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
+		       atmel_st_timer_init);

drivers/pcmcia/Kconfig

@@ -278,6 +278,7 @@ config BFIN_CFPCMCIA
 
 config AT91_CF
 	tristate "AT91 CompactFlash Controller"
+	depends on PCI
 	depends on PCMCIA && ARCH_AT91
 	depends on !ARCH_MULTIPLATFORM
 	help

drivers/pcmcia/at91_cf.c

@@ -317,13 +317,14 @@ static int at91_cf_probe(struct platform_device *pdev)
 	} else
 		cf->socket.pci_irq = nr_irqs + 1;
 
-	/* pcmcia layer only remaps "real" memory not iospace */
-	cf->socket.io_offset = (unsigned long) devm_ioremap(&pdev->dev,
-					cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
-	if (!cf->socket.io_offset) {
-		status = -ENXIO;
+	/*
+	 * pcmcia layer only remaps "real" memory not iospace
+	 * io_offset is set to 0x10000 to avoid the check in static_find_io().
+	 * */
+	cf->socket.io_offset = 0x10000;
+	status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS);
+	if (status)
 		goto fail0a;
-	}
 
 	/* reserve chip-select regions */
 	if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) {

drivers/watchdog/Kconfig

@@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
 
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
-	depends on SOC_AT91RM9200
+	depends on SOC_AT91RM9200 && MFD_SYSCON
 	help
 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 	  system when the timeout is reached.

drivers/watchdog/at91rm9200_wdt.c

@@ -12,27 +12,32 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
 
 static int wdt_time = WDT_DEFAULT_TIME;
 static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
 
 module_param(wdt_time, int, 0);
 MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@@ -50,12 +55,33 @@ static unsigned long at91wdt_busy;
 
 /* ......................................................................... */
 
+static int at91rm9200_restart(struct notifier_block *this,
+					unsigned long mode, void *cmd)
+{
+	/*
+	 * Perform a hardware reset with the use of the Watchdog timer.
+	 */
+	regmap_write(regmap_st, AT91_ST_WDMR,
+		     AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
+
+	mdelay(2000);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block at91rm9200_restart_nb = {
+	.notifier_call = at91rm9200_restart,
+	.priority = 192,
+};
+
 /*
  * Disable the watchdog.
  */
 static inline void at91_wdt_stop(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
 }
 
 /*
@@ -63,9 +89,9 @@ static inline void at91_wdt_stop(void)
  */
 static inline void at91_wdt_start(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
 				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
@@ -73,7 +99,7 @@ static inline void at91_wdt_start(void)
  */
 static inline void at91_wdt_reload(void)
 {
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /* ......................................................................... */
@@ -203,16 +229,32 @@ static struct miscdevice at91wdt_miscdev = {
 
 static int at91wdt_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct device *parent;
 	int res;
 
 	if (at91wdt_miscdev.parent)
 		return -EBUSY;
 	at91wdt_miscdev.parent = &pdev->dev;
 
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap_st = syscon_node_to_regmap(parent->of_node);
+	if (!regmap_st)
+		return -ENODEV;
+
 	res = misc_register(&at91wdt_miscdev);
 	if (res)
 		return res;
 
+	res = register_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to register restart handler\n");
+
 	pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n",
 		wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
@@ -220,8 +262,13 @@ static int at91wdt_probe(struct platform_device *pdev)
 
 static int at91wdt_remove(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	int res;
 
+	res = unregister_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to unregister restart handler\n");
+
 	res = misc_deregister(&at91wdt_miscdev);
 	if (!res)
 		at91wdt_miscdev.parent = NULL;
@@ -267,7 +314,7 @@ static struct platform_driver at91wdt_driver = {
 	.suspend	= at91wdt_suspend,
 	.resume		= at91wdt_resume,
 	.driver		= {
-		.name	= "at91_wdt",
+		.name	= "atmel_st_watchdog",
 		.of_match_table = at91_wdt_dt_ids,
 	},
 };
@@ -296,4 +343,4 @@ module_exit(at91_wdt_exit);
 MODULE_AUTHOR("Andrew Victor");
 MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_wdt");
+MODULE_ALIAS("platform:atmel_st_watchdog");

include/linux/mfd/syscon/atmel-st.h

@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H
+#define _LINUX_MFD_SYSCON_ATMEL_ST_H
+
+#include <linux/bitops.h>
+
+#define AT91_ST_CR	0x00	/* Control Register */
+#define		AT91_ST_WDRST	BIT(0)	/* Watchdog Timer Restart */
+
+#define AT91_ST_PIMR	0x04	/* Period Interval Mode Register */
+#define		AT91_ST_PIV	0xffff	/* Period Interval Value */
+
+#define AT91_ST_WDMR	0x08	/* Watchdog Mode Register */
+#define		AT91_ST_WDV	0xffff	/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN	BIT(16)	/* Reset Enable */
+#define		AT91_ST_EXTEN	BIT(17)	/* External Signal Assertion Enable */
+
+#define AT91_ST_RTMR	0x0c	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES	0xffff	/* Real-time Prescalar Value */
+
+#define AT91_ST_SR	0x10	/* Status Register */
+#define		AT91_ST_PITS	BIT(0)	/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF	BIT(1)	/* Watchdog Overflow */
+#define		AT91_ST_RTTINC	BIT(2)	/* Real-time Timer Increment */
+#define		AT91_ST_ALMS	BIT(3)	/* Alarm Status */
+
+#define AT91_ST_IER	0x14	/* Interrupt Enable Register */
+#define AT91_ST_IDR	0x18	/* Interrupt Disable Register */
+#define AT91_ST_IMR	0x1c	/* Interrupt Mask Register */
+
+#define AT91_ST_RTAR	0x20	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV	0xfffff	/* Alarm Value */
+
+#define AT91_ST_CRTR	0x24	/* Current Real-time Register */
+#define		AT91_ST_CRTV	0xfffff	/* Current Real-Time Value */
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_ST_H */

include/soc/at91/at91sam9_ddrsdr.h

@@ -92,7 +92,7 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define		AT91_DDRSDRC_MD		(7 << 0)	/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3