IB/hfi1: Get the hfi1_devdata structure as early as possible

Currently several things occur before the hfi1_devdata structure is
allocated.  This leads to an inconsistent logging ability and makes
it more difficult to restructure some code paths.

Allocate (and do a minimal init) the structure as soon as possible.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hfi1/chip.c

@@ -67,8 +67,6 @@
 #include "debugfs.h"
 #include "fault.h"
 
-#define NUM_IB_PORTS 1
-
 uint kdeth_qp;
 module_param_named(kdeth_qp, kdeth_qp, uint, S_IRUGO);
 MODULE_PARM_DESC(kdeth_qp, "Set the KDETH queue pair prefix");
@@ -14914,20 +14912,16 @@ err_exit:
 }
 
 /**
- * Allocate and initialize the device structure for the hfi.
+ * hfi1_init_dd() - Initialize most of the dd structure.
  * @dev: the pci_dev for hfi1_ib device
  * @ent: pci_device_id struct for this dev
  *
- * Also allocates, initializes, and returns the devdata struct for this
- * device instance
- *
  * This is global, and is called directly at init to set up the
  * chip-specific function pointers for later use.
  */
-struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
+int hfi1_init_dd(struct hfi1_devdata *dd)
 {
-	struct hfi1_devdata *dd;
+	struct pci_dev *pdev = dd->pcidev;
 	struct hfi1_pportdata *ppd;
 	u64 reg;
 	int i, ret;
@@ -14938,13 +14932,8 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
 		"Functional simulator"
 	};
 	struct pci_dev *parent = pdev->bus->self;
-	u32 sdma_engines;
+	u32 sdma_engines = chip_sdma_engines(dd);
 
-	dd = hfi1_alloc_devdata(pdev, NUM_IB_PORTS *
-				sizeof(struct hfi1_pportdata));
-	if (IS_ERR(dd))
-		goto bail;
-	sdma_engines = chip_sdma_engines(dd);
 	ppd = dd->pport;
 	for (i = 0; i < dd->num_pports; i++, ppd++) {
 		int vl;
@@ -15246,9 +15235,8 @@ bail_cleanup:
 	hfi1_pcie_ddcleanup(dd);
 bail_free:
 	hfi1_free_devdata(dd);
-	dd = ERR_PTR(ret);
 bail:
-	return dd;
+	return ret;
 }
 
 static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate,

drivers/infiniband/hw/hfi1/hfi.h

@@ -1887,10 +1887,8 @@ struct cc_state *get_cc_state_protected(struct hfi1_pportdata *ppd)
 #define HFI1_CTXT_WAITING_URG 4
 
 /* free up any allocated data at closes */
-struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
-				  const struct pci_device_id *ent);
+int hfi1_init_dd(struct hfi1_devdata *dd);
 void hfi1_free_devdata(struct hfi1_devdata *dd);
-struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra);
 
 /* LED beaconing functions */
 void hfi1_start_led_override(struct hfi1_pportdata *ppd, unsigned int timeon,
@@ -1974,7 +1972,7 @@ void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *dd);
 /* Hook for sysfs read of QSFP */
 int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len);
 
-int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent);
+int hfi1_pcie_init(struct hfi1_devdata *dd);
 void hfi1_clean_up_interrupts(struct hfi1_devdata *dd);
 void hfi1_pcie_cleanup(struct pci_dev *pdev);
 int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev);
@@ -2125,19 +2123,6 @@ static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd)
 	return base_sdma_integrity;
 }
 
-/*
- * hfi1_early_err is used (only!) to print early errors before devdata is
- * allocated, or when dd->pcidev may not be valid, and at the tail end of
- * cleanup when devdata may have been freed, etc.  hfi1_dev_porterr is
- * the same as dd_dev_err, but is used when the message really needs
- * the IB port# to be definitive as to what's happening..
- */
-#define hfi1_early_err(dev, fmt, ...) \
-	dev_err(dev, fmt, ##__VA_ARGS__)
-
-#define hfi1_early_info(dev, fmt, ...) \
-	dev_info(dev, fmt, ##__VA_ARGS__)
-
 #define dd_dev_emerg(dd, fmt, ...) \
 	dev_emerg(&(dd)->pcidev->dev, "%s: " fmt, \
 		  rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)

drivers/infiniband/hw/hfi1/init.c

@@ -83,6 +83,8 @@
 #define HFI1_MIN_EAGER_BUFFER_SIZE (4 * 1024) /* 4KB */
 #define HFI1_MAX_EAGER_BUFFER_SIZE (256 * 1024) /* 256KB */
 
+#define NUM_IB_PORTS 1
+
 /*
  * Number of user receive contexts we are configured to use (to allow for more
  * pio buffers per ctxt, etc.)  Zero means use one user context per CPU.
@@ -654,9 +656,8 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
 	ppd->part_enforce |= HFI1_PART_ENFORCE_IN;
 
 	if (loopback) {
-		hfi1_early_err(&pdev->dev,
-			       "Faking data partition 0x8001 in idx %u\n",
-			       !default_pkey_idx);
+		dd_dev_err(dd, "Faking data partition 0x8001 in idx %u\n",
+			   !default_pkey_idx);
 		ppd->pkeys[!default_pkey_idx] = 0x8001;
 	}
 
@@ -702,9 +703,7 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
 	return;
 
 bail:
-
-	hfi1_early_err(&pdev->dev,
-		       "Congestion Control Agent disabled for port %d\n", port);
+	dd_dev_err(dd, "Congestion Control Agent disabled for port %d\n", port);
 }
 
 /*
@@ -1246,15 +1245,19 @@ void hfi1_free_devdata(struct hfi1_devdata *dd)
 	kobject_put(&dd->kobj);
 }
 
-/*
- * Allocate our primary per-unit data structure.  Must be done via verbs
- * allocator, because the verbs cleanup process both does cleanup and
- * free of the data structure.
+/**
+ * hfi1_alloc_devdata - Allocate our primary per-unit data structure.
+ * @pdev: Valid PCI device
+ * @extra: How many bytes to alloc past the default
+ *
+ * Must be done via verbs allocator, because the verbs cleanup process
+ * both does cleanup and free of the data structure.
  * "extra" is for chip-specific data.
  *
  * Use the idr mechanism to get a unit number for this unit.
  */
-struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra)
+static struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev,
+					       size_t extra)
 {
 	unsigned long flags;
 	struct hfi1_devdata *dd;
@@ -1287,8 +1290,8 @@ struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra)
 	idr_preload_end();
 
 	if (ret < 0) {
-		hfi1_early_err(&pdev->dev,
-			       "Could not allocate unit ID: error %d\n", -ret);
+		dev_err(&pdev->dev,
+			"Could not allocate unit ID: error %d\n", -ret);
 		goto bail;
 	}
 	rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s_%d", class_name(), dd->unit);
@@ -1604,23 +1607,23 @@ static void postinit_cleanup(struct hfi1_devdata *dd)
 	hfi1_free_devdata(dd);
 }
 
-static int init_validate_rcvhdrcnt(struct device *dev, uint thecnt)
+static int init_validate_rcvhdrcnt(struct hfi1_devdata *dd, uint thecnt)
 {
 	if (thecnt <= HFI1_MIN_HDRQ_EGRBUF_CNT) {
-		hfi1_early_err(dev, "Receive header queue count too small\n");
+		dd_dev_err(dd, "Receive header queue count too small\n");
 		return -EINVAL;
 	}
 
 	if (thecnt > HFI1_MAX_HDRQ_EGRBUF_CNT) {
-		hfi1_early_err(dev,
-			       "Receive header queue count cannot be greater than %u\n",
-			       HFI1_MAX_HDRQ_EGRBUF_CNT);
+		dd_dev_err(dd,
+			   "Receive header queue count cannot be greater than %u\n",
+			   HFI1_MAX_HDRQ_EGRBUF_CNT);
 		return -EINVAL;
 	}
 
 	if (thecnt % HDRQ_INCREMENT) {
-		hfi1_early_err(dev, "Receive header queue count %d must be divisible by %lu\n",
-			       thecnt, HDRQ_INCREMENT);
+		dd_dev_err(dd, "Receive header queue count %d must be divisible by %lu\n",
+			   thecnt, HDRQ_INCREMENT);
 		return -EINVAL;
 	}
 
@@ -1639,22 +1642,29 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* Validate dev ids */
 	if (!(ent->device == PCI_DEVICE_ID_INTEL0 ||
 	      ent->device == PCI_DEVICE_ID_INTEL1)) {
-		hfi1_early_err(&pdev->dev,
-			       "Failing on unknown Intel deviceid 0x%x\n",
-			       ent->device);
+		dev_err(&pdev->dev, "Failing on unknown Intel deviceid 0x%x\n",
+			ent->device);
 		ret = -ENODEV;
 		goto bail;
 	}
 
+	/* Allocate the dd so we can get to work */
+	dd = hfi1_alloc_devdata(pdev, NUM_IB_PORTS *
+				sizeof(struct hfi1_pportdata));
+	if (IS_ERR(dd)) {
+		ret = PTR_ERR(dd);
+		goto bail;
+	}
+
 	/* Validate some global module parameters */
-	ret = init_validate_rcvhdrcnt(&pdev->dev, rcvhdrcnt);
+	ret = init_validate_rcvhdrcnt(dd, rcvhdrcnt);
 	if (ret)
 		goto bail;
 
 	/* use the encoding function as a sanitization check */
 	if (!encode_rcv_header_entry_size(hfi1_hdrq_entsize)) {
-		hfi1_early_err(&pdev->dev, "Invalid HdrQ Entry size %u\n",
-			       hfi1_hdrq_entsize);
+		dd_dev_err(dd, "Invalid HdrQ Entry size %u\n",
+			   hfi1_hdrq_entsize);
 		ret = -EINVAL;
 		goto bail;
 	}
@@ -1676,10 +1686,10 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			clamp_val(eager_buffer_size,
 				  MIN_EAGER_BUFFER * 8,
 				  MAX_EAGER_BUFFER_TOTAL);
-		hfi1_early_info(&pdev->dev, "Eager buffer size %u\n",
-				eager_buffer_size);
+		dd_dev_info(dd, "Eager buffer size %u\n",
+			    eager_buffer_size);
 	} else {
-		hfi1_early_err(&pdev->dev, "Invalid Eager buffer size of 0\n");
+		dd_dev_err(dd, "Invalid Eager buffer size of 0\n");
 		ret = -EINVAL;
 		goto bail;
 	}
@@ -1687,7 +1697,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* restrict value of hfi1_rcvarr_split */
 	hfi1_rcvarr_split = clamp_val(hfi1_rcvarr_split, 0, 100);
 
-	ret = hfi1_pcie_init(pdev, ent);
+	ret = hfi1_pcie_init(dd);
 	if (ret)
 		goto bail;
 
@@ -1695,12 +1705,9 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * Do device-specific initialization, function table setup, dd
 	 * allocation, etc.
 	 */
-	dd = hfi1_init_dd(pdev, ent);
-
-	if (IS_ERR(dd)) {
-		ret = PTR_ERR(dd);
+	ret = hfi1_init_dd(dd);
+	if (ret)
 		goto clean_bail; /* error already printed */
-	}
 
 	ret = create_workqueues(dd);
 	if (ret)

drivers/infiniband/hw/hfi1/pcie.c

@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2015 - 2017 Intel Corporation.
+ * Copyright(c) 2015 - 2018 Intel Corporation.
  *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
@@ -62,13 +62,11 @@
 
 /*
  * Do all the common PCIe setup and initialization.
- * devdata is not yet allocated, and is not allocated until after this
- * routine returns success.  Therefore dd_dev_err() can't be used for error
- * printing.
  */
-int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+int hfi1_pcie_init(struct hfi1_devdata *dd)
 {
 	int ret;
+	struct pci_dev *pdev = dd->pcidev;
 
 	ret = pci_enable_device(pdev);
 	if (ret) {
@@ -84,15 +82,13 @@ int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		 * about that, it appears.  If the original BAR was retained
 		 * in the kernel data structures, this may be OK.
 		 */
-		hfi1_early_err(&pdev->dev, "pci enable failed: error %d\n",
-			       -ret);
-		goto done;
+		dd_dev_err(dd, "pci enable failed: error %d\n", -ret);
+		return ret;
 	}
 
 	ret = pci_request_regions(pdev, DRIVER_NAME);
 	if (ret) {
-		hfi1_early_err(&pdev->dev,
-			       "pci_request_regions fails: err %d\n", -ret);
+		dd_dev_err(dd, "pci_request_regions fails: err %d\n", -ret);
 		goto bail;
 	}
 
@@ -105,8 +101,7 @@ int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		 */
 		ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (ret) {
-			hfi1_early_err(&pdev->dev,
-				       "Unable to set DMA mask: %d\n", ret);
+			dd_dev_err(dd, "Unable to set DMA mask: %d\n", ret);
 			goto bail;
 		}
 		ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
@@ -114,18 +109,16 @@ int hfi1_pcie_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 	}
 	if (ret) {
-		hfi1_early_err(&pdev->dev,
-			       "Unable to set DMA consistent mask: %d\n", ret);
+		dd_dev_err(dd, "Unable to set DMA consistent mask: %d\n", ret);
 		goto bail;
 	}
 
 	pci_set_master(pdev);
 	(void)pci_enable_pcie_error_reporting(pdev);
-	goto done;
+	return 0;
 
 bail:
 	hfi1_pcie_cleanup(pdev);
-done:
 	return ret;
 }
 
@@ -201,7 +194,7 @@ int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev)
 		dd_dev_err(dd, "WC mapping of send buffers failed\n");
 		goto nomem;
 	}
-	dd_dev_info(dd, "WC piobase: %p\n for %x", dd->piobase, TXE_PIO_SIZE);
+	dd_dev_info(dd, "WC piobase: %p for %x\n", dd->piobase, TXE_PIO_SIZE);
 
 	dd->physaddr = addr;        /* used for io_remap, etc. */