thermal: exynos: remove TMU_SUPPORT_ADDRESS_MULTIPLE flag

Replace TMU_SUPPORT_ADDRESS_MULTIPLE flag check in exynos_map_dt_data()
by an explicit check for a SoC type (only Exynos5420 with TRIMINFO
quirk and Exynos5440 have TMU_SUPPORT_ADDRESS_MULTIPLE flag set in
their struct exynos_tmu_init_data instances).

Please note that this requires moving SoC type assignment and verification
from exynos_tmu_probe() to exynos_map_dt_data() so it happens earlier
(which is a good thing in itself).

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

drivers/thermal/samsung/exynos_tmu.c

@@ -473,7 +473,6 @@ static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
 static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
 {
 	struct exynos_tmu_data *data = drv_data;
-	struct exynos_tmu_platform_data *pdata = data->pdata;
 	int ret = -EINVAL;
 
 	if (data->soc == SOC_ARCH_EXYNOS4210)
@@ -696,12 +695,47 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		dev_err(&pdev->dev, "No platform init data supplied.\n");
 		return -ENODEV;
 	}
+
 	data->pdata = pdata;
+	data->soc = pdata->type;
+
+	switch (data->soc) {
+	case SOC_ARCH_EXYNOS4210:
+		data->tmu_initialize = exynos4210_tmu_initialize;
+		data->tmu_control = exynos4210_tmu_control;
+		data->tmu_read = exynos4210_tmu_read;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		break;
+	case SOC_ARCH_EXYNOS3250:
+	case SOC_ARCH_EXYNOS4412:
+	case SOC_ARCH_EXYNOS5250:
+	case SOC_ARCH_EXYNOS5260:
+	case SOC_ARCH_EXYNOS5420:
+	case SOC_ARCH_EXYNOS5420_TRIMINFO:
+		data->tmu_initialize = exynos4412_tmu_initialize;
+		data->tmu_control = exynos4210_tmu_control;
+		data->tmu_read = exynos4412_tmu_read;
+		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		break;
+	case SOC_ARCH_EXYNOS5440:
+		data->tmu_initialize = exynos5440_tmu_initialize;
+		data->tmu_control = exynos5440_tmu_control;
+		data->tmu_read = exynos5440_tmu_read;
+		data->tmu_set_emulation = exynos5440_tmu_set_emulation;
+		data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
+		break;
+	default:
+		dev_err(&pdev->dev, "Platform not supported\n");
+		return -EINVAL;
+	}
+
 	/*
 	 * Check if the TMU shares some registers and then try to map the
 	 * memory of common registers.
 	 */
-	if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE))
+	if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
+	    data->soc != SOC_ARCH_EXYNOS5440)
 		return 0;
 
 	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
@@ -768,40 +802,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		goto err_clk_sec;
 	}
 
-	data->soc = pdata->type;
-
-	switch (data->soc) {
-	case SOC_ARCH_EXYNOS4210:
-		data->tmu_initialize = exynos4210_tmu_initialize;
-		data->tmu_control = exynos4210_tmu_control;
-		data->tmu_read = exynos4210_tmu_read;
-		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
-		break;
-	case SOC_ARCH_EXYNOS3250:
-	case SOC_ARCH_EXYNOS4412:
-	case SOC_ARCH_EXYNOS5250:
-	case SOC_ARCH_EXYNOS5260:
-	case SOC_ARCH_EXYNOS5420:
-	case SOC_ARCH_EXYNOS5420_TRIMINFO:
-		data->tmu_initialize = exynos4412_tmu_initialize;
-		data->tmu_control = exynos4210_tmu_control;
-		data->tmu_read = exynos4412_tmu_read;
-		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
-		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
-		break;
-	case SOC_ARCH_EXYNOS5440:
-		data->tmu_initialize = exynos5440_tmu_initialize;
-		data->tmu_control = exynos5440_tmu_control;
-		data->tmu_read = exynos5440_tmu_read;
-		data->tmu_set_emulation = exynos5440_tmu_set_emulation;
-		data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
-		break;
-	default:
-		ret = -EINVAL;
-		dev_err(&pdev->dev, "Platform not supported\n");
-		goto err_clk;
-	}
-
 	ret = exynos_tmu_initialize(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize TMU\n");

drivers/thermal/samsung/exynos_tmu.h

@@ -49,12 +49,9 @@ enum soc_type {
  * EXYNOS TMU supported features.
  * TMU_SUPPORT_MULTI_INST - This features denotes that the soc
  *			has many instances of TMU.
- * TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
- *			sensors shares some common registers.
  * TMU_SUPPORT - macro to compare the above features with the supplied.
  */
 #define TMU_SUPPORT_MULTI_INST			BIT(0)
-#define TMU_SUPPORT_ADDRESS_MULTIPLE		BIT(1)
 
 #define TMU_SUPPORTS(a, b)	(a->features & TMU_SUPPORT_ ## b)
 

drivers/thermal/samsung/exynos_tmu_data.c

@@ -275,8 +275,7 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
 
 #define EXYNOS5420_TMU_DATA_SHARED \
 	__EXYNOS5420_TMU_DATA \
-	.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
-	.features = TMU_SUPPORT_ADDRESS_MULTIPLE
+	.type = SOC_ARCH_EXYNOS5420_TRIMINFO
 
 struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
 	.tmu_data = {
@@ -310,7 +309,7 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
 	.second_point_trim = 70, \
 	.default_temp_offset = 25, \
 	.type = SOC_ARCH_EXYNOS5440, \
-	.features = (TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_ADDRESS_MULTIPLE),
+	.features = TMU_SUPPORT_MULTI_INST,
 
 struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
 	.tmu_data = {