mmc: rtsx: fix tuning fail on gen3 PCI-Express

On gen3 PCI-Express we should send command one by one.
If sending many commands in one packet will lead to a failure.

Signed-off-by: rui_feng <rui_feng@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/rtsx_pci_sdmmc.c

@@ -618,29 +618,22 @@ static int sd_change_phase(struct realtek_pci_sdmmc *host,
 		u8 sample_point, bool rx)
 {
 	struct rtsx_pcr *pcr = host->pcr;
-	int err;
 
 	dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n",
 			__func__, rx ? "RX" : "TX", sample_point);
 
-	rtsx_pci_init_cmd(pcr);
-
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
+	rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
 	if (rx)
-		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-				SD_VPRX_CTL, 0x1F, sample_point);
+		rtsx_pci_write_register(pcr, SD_VPRX_CTL,
+			PHASE_SELECT_MASK, sample_point);
 	else
-		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-				SD_VPTX_CTL, 0x1F, sample_point);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
-			PHASE_NOT_RESET, PHASE_NOT_RESET);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, 0);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
-
-	err = rtsx_pci_send_cmd(pcr, 100);
-	if (err < 0)
-		return err;
+		rtsx_pci_write_register(pcr, SD_VPTX_CTL,
+			PHASE_SELECT_MASK, sample_point);
+	rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
+	rtsx_pci_write_register(pcr, SD_VPCLK0_CTL, PHASE_NOT_RESET,
+				PHASE_NOT_RESET);
+	rtsx_pci_write_register(pcr, CLK_CTL, CHANGE_CLK, 0);
+	rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
 
 	return 0;
 }
@@ -708,10 +701,12 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
 {
 	int err;
 	struct mmc_command cmd = {};
+	struct rtsx_pcr *pcr = host->pcr;
 
-	err = sd_change_phase(host, sample_point, true);
-	if (err < 0)
-		return err;
+	sd_change_phase(host, sample_point, true);
+
+	rtsx_pci_write_register(pcr, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN,
+		SD_RSP_80CLK_TIMEOUT_EN);
 
 	cmd.opcode = opcode;
 	err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100);
@@ -719,9 +714,12 @@ static int sd_tuning_rx_cmd(struct realtek_pci_sdmmc *host,
 		/* Wait till SD DATA IDLE */
 		sd_wait_data_idle(host);
 		sd_clear_error(host);
+		rtsx_pci_write_register(pcr, SD_CFG3,
+			SD_RSP_80CLK_TIMEOUT_EN, 0);
 		return err;
 	}
 
+	rtsx_pci_write_register(pcr, SD_CFG3, SD_RSP_80CLK_TIMEOUT_EN, 0);
 	return 0;
 }
 

include/linux/mfd/rtsx_pci.h

@@ -334,6 +334,7 @@
 #define DCM_DRP_RD_DATA_H		0xFC29
 #define SD_VPCLK0_CTL			0xFC2A
 #define SD_VPCLK1_CTL			0xFC2B
+#define   PHASE_SELECT_MASK		0x1F
 #define SD_DCMPS0_CTL			0xFC2C
 #define SD_DCMPS1_CTL			0xFC2D
 #define SD_VPTX_CTL			SD_VPCLK0_CTL