ASoC: AMD: Fix Capture DMA channel names

On capture, audio data is first copied from I2S to ACP memory, and then
to SYSRAM.  For each step the channel number increases, so the names in
the driver were wrong.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/amd/acp-pcm-dma.c

@@ -697,31 +697,31 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream);
-		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
+		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
 		valid_irq = true;
-		acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16,
+		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
 		acp_reg_write((intr_flag &
-			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
+			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
+	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		acp_reg_write((intr_flag &
-			      BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16,
+			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
@@ -899,8 +899,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 		switch (rtd->i2s_instance) {
 		case I2S_BT_INSTANCE:
 			rtd->pte_offset = ACP_ST_BT_CAPTURE_PTE_OFFSET;
-			rtd->ch1 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
-			rtd->ch2 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+			rtd->ch1 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM;
+			rtd->ch2 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM;
 			rtd->sram_bank = ACP_SRAM_BANK_4_ADDRESS;
 			rtd->destination = FROM_BLUETOOTH;
 			rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10;
@@ -914,8 +914,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream,
 		case I2S_SP_INSTANCE:
 		default:
 			rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET;
-			rtd->ch1 = ACP_TO_SYSRAM_CH_NUM;
-			rtd->ch2 = I2S_TO_ACP_DMA_CH_NUM;
+			rtd->ch1 = I2S_TO_ACP_DMA_CH_NUM;
+			rtd->ch2 = ACP_TO_SYSRAM_CH_NUM;
 			switch (adata->asic_type) {
 			case CHIP_STONEY:
 				rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET;

sound/soc/amd/acp.h

@@ -74,16 +74,16 @@
 #define ACP_TO_I2S_DMA_CH_NUM 13
 
 /* Capture DMA channels */
-#define ACP_TO_SYSRAM_CH_NUM 14
-#define I2S_TO_ACP_DMA_CH_NUM 15
+#define I2S_TO_ACP_DMA_CH_NUM 14
+#define ACP_TO_SYSRAM_CH_NUM 15
 
 /* Playback DMA Channels for I2S BT instance */
 #define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM  8
 #define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9
 
 /* Capture DMA Channels for I2S BT Instance */
-#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 10
-#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 11
+#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10
+#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11
 
 #define NUM_DSCRS_PER_CHANNEL 2