Merge branch 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "Various device specific fixes.  Nothing too interesting"

* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: disable NCQ on Samsung pci-e SSDs on macbooks
  ata: sata_mv: Cleanup only the initialized ports
  sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN
  ata: enable quirk from jmicron JMB350 for JMB394
  ATA: SATA_MV: Add missing Kconfig select statememnt
  ata: pata_imx: Check the return value from clk_prepare_enable()

drivers/ata/Kconfig

@@ -247,6 +247,7 @@ config SATA_HIGHBANK
 
 config SATA_MV
 	tristate "Marvell SATA support"
+	select GENERIC_PHY
 	help
 	  This option enables support for the Marvell Serial ATA family.
 	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,

drivers/ata/ahci.c

@@ -61,6 +61,7 @@ enum board_ids {
 	/* board IDs by feature in alphabetical order */
 	board_ahci,
 	board_ahci_ign_iferr,
+	board_ahci_noncq,
 	board_ahci_nosntf,
 	board_ahci_yes_fbs,
 
@@ -121,6 +122,13 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
+	[board_ahci_noncq] = {
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 	[board_ahci_nosntf] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_SNTF),
 		.flags		= AHCI_FLAG_COMMON,
@@ -452,6 +460,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci },	/* ASM1061 */
 	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
 
+	/*
+	 * Samsung SSDs found on some macbooks.  NCQ times out.
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=60731
+	 */
+	{ PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq },
+
 	/* Enmotus */
 	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
 

drivers/ata/libata-pmp.c

@@ -447,8 +447,11 @@ static void sata_pmp_quirks(struct ata_port *ap)
 		 * otherwise.  Don't try hard to recover it.
 		 */
 		ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
-	} else if (vendor == 0x197b && devid == 0x2352) {
-		/* chip found in Thermaltake BlackX Duet, jmicron JMB350? */
+	} else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) {
+		/*
+		 * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350?
+		 * 0x0325: jmicron JMB394.
+		 */
 		ata_for_each_link(link, ap, EDGE) {
 			/* SRST breaks detection and disks get misclassified
 			 * LPM disabled to avoid potential problems

drivers/ata/pata_imx.c

@@ -119,7 +119,9 @@ static int pata_imx_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 	}
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	host = ata_host_alloc(&pdev->dev, 1);
 	if (!host) {
@@ -212,7 +214,9 @@ static int pata_imx_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct pata_imx_priv *priv = host->private_data;
 
-	clk_prepare_enable(priv->clk);
+	int ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	__raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL);
 

drivers/ata/sata_mv.c

@@ -4104,7 +4104,6 @@ static int mv_platform_probe(struct platform_device *pdev)
 	if (!hpriv->port_phys)
 		return -ENOMEM;
 	host->private_data = hpriv;
-	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
 
 	host->iomap = NULL;
@@ -4132,13 +4131,18 @@ static int mv_platform_probe(struct platform_device *pdev)
 			rc = PTR_ERR(hpriv->port_phys[port]);
 			hpriv->port_phys[port] = NULL;
 			if (rc != -EPROBE_DEFER)
-				dev_warn(&pdev->dev, "error getting phy %d",
-					rc);
+				dev_warn(&pdev->dev, "error getting phy %d", rc);
+
+			/* Cleanup only the initialized ports */
+			hpriv->n_ports = port;
 			goto err;
 		} else
 			phy_power_on(hpriv->port_phys[port]);
 	}
 
+	/* All the ports have been initialized */
+	hpriv->n_ports = n_ports;
+
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
 	 */
@@ -4176,7 +4180,7 @@ err:
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-	for (port = 0; port < n_ports; port++) {
+	for (port = 0; port < hpriv->n_ports; port++) {
 		if (!IS_ERR(hpriv->port_clks[port])) {
 			clk_disable_unprepare(hpriv->port_clks[port]);
 			clk_put(hpriv->port_clks[port]);

drivers/ata/sata_sil.c

@@ -157,6 +157,7 @@ static const struct sil_drivelist {
 	{ "ST380011ASL",	SIL_QUIRK_MOD15WRITE },
 	{ "ST3120022ASL",	SIL_QUIRK_MOD15WRITE },
 	{ "ST3160021ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "TOSHIBA MK2561GSYN",	SIL_QUIRK_MOD15WRITE },
 	{ "Maxtor 4D060H3",	SIL_QUIRK_UDMA5MAX },
 	{ }
 };