Merge airlied/drm-next into drm-misc-next

It's been a while since we've backmerged drm-next. Dave just brought
back 4.15-rc8, so now's a good time to freshen things up around here.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

.mailmap

@@ -107,6 +107,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Mark Brown <broonie@sirena.org.uk>
+Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Matthieu CASTET <castet.matthieu@free.fr>

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -375,3 +375,19 @@ Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	information about CPUs heterogeneity.
 
 		cpu_capacity: capacity of cpu#.
+
+What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/spectre_v1
+		/sys/devices/system/cpu/vulnerabilities/spectre_v2
+Date:		January 2018
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Information about CPU vulnerabilities
+
+		The files are named after the code names of CPU
+		vulnerabilities. The output of those files reflects the
+		state of the CPUs in the system. Possible output values:
+
+		"Not affected"	  CPU is not affected by the vulnerability
+		"Vulnerable"	  CPU is affected and no mitigation in effect
+		"Mitigation: $M"  CPU is affected and mitigation $M is in effect

Documentation/admin-guide/kernel-parameters.rst

@@ -109,6 +109,7 @@ parameter is applicable::
 	IPV6	IPv6 support is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
+	ISOL	CPU Isolation is enabled.
 	JOY	Appropriate joystick support is enabled.
 	KGDB	Kernel debugger support is enabled.
 	KVM	Kernel Virtual Machine support is enabled.

Documentation/admin-guide/kernel-parameters.txt

@@ -328,11 +328,15 @@
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
+			For X86-32, this can also be used to specify an APIC
+			driver name.
+			Format: apic=driver_name
+			Examples: apic=bigsmp
 
 	apic_extnmi=	[APIC,X86] External NMI delivery setting
 			Format: { bsp (default) | all | none }
@@ -709,9 +713,6 @@
 			It will be ignored when crashkernel=X,high is not used
 			or memory reserved is below 4G.
 
-	crossrelease_fullstack
-			[KNL] Allow to record full stack trace in cross-release
-
 	cryptomgr.notests
                         [KNL] Disable crypto self-tests
 
@@ -1737,7 +1738,7 @@
 	isapnp=		[ISAPNP]
 			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
-	isolcpus=	[KNL,SMP] Isolate a given set of CPUs from disturbance.
+	isolcpus=	[KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance.
 			[Deprecated - use cpusets instead]
 			Format: [flag-list,]<cpu-list>
 
@@ -2622,6 +2623,11 @@
 	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
 			Equivalent to smt=1.
 
+	nospectre_v2	[X86] Disable all mitigations for the Spectre variant 2
+			(indirect branch prediction) vulnerability. System may
+			allow data leaks with this option, which is equivalent
+			to spectre_v2=off.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -2662,7 +2668,7 @@
 			Valid arguments: on, off
 			Default: on
 
-	nohz_full=	[KNL,BOOT]
+	nohz_full=	[KNL,BOOT,SMP,ISOL]
 			The argument is a cpu list, as described above.
 			In kernels built with CONFIG_NO_HZ_FULL=y, set
 			the specified list of CPUs whose tick will be stopped
@@ -3094,6 +3100,12 @@
 		pcie_scan_all	Scan all possible PCIe devices.  Otherwise we
 				only look for one device below a PCIe downstream
 				port.
+		big_root_window	Try to add a big 64bit memory window to the PCIe
+				root complex on AMD CPUs. Some GFX hardware
+				can resize a BAR to allow access to all VRAM.
+				Adding the window is slightly risky (it may
+				conflict with unreported devices), so this
+				taints the kernel.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -3282,6 +3294,21 @@
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
+	pti=		[X86_64] Control Page Table Isolation of user and
+			kernel address spaces.  Disabling this feature
+			removes hardening, but improves performance of
+			system calls and interrupts.
+
+			on   - unconditionally enable
+			off  - unconditionally disable
+			auto - kernel detects whether your CPU model is
+			       vulnerable to issues that PTI mitigates
+
+			Not specifying this option is equivalent to pti=auto.
+
+	nopti		[X86_64]
+			Equivalent to pti=off
+
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.
@@ -3931,6 +3958,29 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/laptops/sonypi.txt
 
+	spectre_v2=	[X86] Control mitigation of Spectre variant 2
+			(indirect branch speculation) vulnerability.
+
+			on   - unconditionally enable
+			off  - unconditionally disable
+			auto - kernel detects whether your CPU model is
+			       vulnerable
+
+			Selecting 'on' will, and 'auto' may, choose a
+			mitigation method at run time according to the
+			CPU, the available microcode, the setting of the
+			CONFIG_RETPOLINE configuration option, and the
+			compiler with which the kernel was built.
+
+			Specific mitigations can also be selected manually:
+
+			retpoline	  - replace indirect branches
+			retpoline,generic - google's original retpoline
+			retpoline,amd     - AMD-specific minimal thunk
+
+			Not specifying this option is equivalent to
+			spectre_v2=auto.
+
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
 	spia_pedr=

Documentation/admin-guide/thunderbolt.rst

@@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with
 a sysfs attribute called "force_power".
 
 For example the intel-wmi-thunderbolt driver exposes this attribute in:
-  /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
+  /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
 
   To force the power to on, write 1 to this attribute file.
   To disable force power, write 0 to this attribute file.

Documentation/arm64/silicon-errata.txt

@@ -75,3 +75,4 @@ stable kernels.
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
 | Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
+| Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |

Documentation/cgroup-v2.txt

@@ -898,6 +898,13 @@ controller implements weight and absolute bandwidth limit models for
 normal scheduling policy and absolute bandwidth allocation model for
 realtime scheduling policy.
 
+WARNING: cgroup2 doesn't yet support control of realtime processes and
+the cpu controller can only be enabled when all RT processes are in
+the root cgroup.  Be aware that system management software may already
+have placed RT processes into nonroot cgroups during the system boot
+process, and these processes may need to be moved to the root cgroup
+before the cpu controller can be enabled.
+
 
 CPU Interface Files
 ~~~~~~~~~~~~~~~~~~~

Documentation/core-api/genericirq.rst

@@ -225,9 +225,9 @@ interrupts.
 
 The following control flow is implemented (simplified excerpt)::
 
-    :c:func:`desc->irq_data.chip->irq_mask_ack`;
+    desc->irq_data.chip->irq_mask_ack();
     handle_irq_event(desc->action);
-    :c:func:`desc->irq_data.chip->irq_unmask`;
+    desc->irq_data.chip->irq_unmask();
 
 
 Default Fast EOI IRQ flow handler
@@ -239,7 +239,7 @@ which only need an EOI at the end of the handler.
 The following control flow is implemented (simplified excerpt)::
 
     handle_irq_event(desc->action);
-    :c:func:`desc->irq_data.chip->irq_eoi`;
+    desc->irq_data.chip->irq_eoi();
 
 
 Default Edge IRQ flow handler
@@ -251,15 +251,15 @@ interrupts.
 The following control flow is implemented (simplified excerpt)::
 
     if (desc->status & running) {
-        :c:func:`desc->irq_data.chip->irq_mask_ack`;
+        desc->irq_data.chip->irq_mask_ack();
         desc->status |= pending | masked;
         return;
     }
-    :c:func:`desc->irq_data.chip->irq_ack`;
+    desc->irq_data.chip->irq_ack();
     desc->status |= running;
     do {
         if (desc->status & masked)
-            :c:func:`desc->irq_data.chip->irq_unmask`;
+            desc->irq_data.chip->irq_unmask();
         desc->status &= ~pending;
         handle_irq_event(desc->action);
     } while (status & pending);
@@ -293,10 +293,10 @@ simplified version without locking.
 The following control flow is implemented (simplified excerpt)::
 
     if (desc->irq_data.chip->irq_ack)
-        :c:func:`desc->irq_data.chip->irq_ack`;
+        desc->irq_data.chip->irq_ack();
     handle_irq_event(desc->action);
     if (desc->irq_data.chip->irq_eoi)
-            :c:func:`desc->irq_data.chip->irq_eoi`;
+        desc->irq_data.chip->irq_eoi();
 
 
 EOI Edge IRQ flow handler

Documentation/devicetree/bindings/arm/ccn.txt

@@ -15,7 +15,7 @@ Required properties:
 
 Example:
 
-	ccn@0x2000000000 {
+	ccn@2000000000 {
 		compatible = "arm,ccn-504";
 		reg = <0x20 0x00000000 0 0x1000000>;
 		interrupts = <0 181 4>;

Documentation/devicetree/bindings/arm/omap/crossbar.txt

@@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
 	interrupts = <GIC_SPI request_number interrupt_level>
 
 Example:
-	device_x@0x4a023000 {
+	device_x@4a023000 {
 		/* Crossbar 8 used */
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		...

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	memory-controller@0x7000f000 {
+	memory-controller@7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

Documentation/devicetree/bindings/clock/axi-clkgen.txt

@@ -17,7 +17,7 @@ Optional properties:
 - clock-output-names : From common clock binding.
 
 Example:
-	clock@0xff000000 {
+	clock@ff000000 {
 		compatible = "adi,axi-clkgen";
 		#clock-cells = <0>;
 		reg = <0xff000000 0x1000>;

Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt

@@ -23,7 +23,7 @@ Example:
 		clocks = <&clk_osc>;
 	};
 
-	aux: aux@0x7e215004 {
+	aux: aux@7e215004 {
 		compatible = "brcm,bcm2835-aux";
 		#clock-cells = <1>;
 		reg = <0x7e215000 0x8>;

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -24,7 +24,7 @@ tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10030000 {
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4210-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -22,7 +22,7 @@ tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5410-clock.txt

@@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
 		#clock-cells = <0>;
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5410-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -23,7 +23,7 @@ tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5420-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -21,7 +21,7 @@ tree sources.
 
 Example: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5440-clock";
 		reg = <0x160000 0x10000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt

@@ -14,7 +14,7 @@ Required properties:
 
 Example:
 
-pllctrl: pll-controller@0x02310000 {
+pllctrl: pll-controller@02310000 {
 	compatible = "ti,keystone-pllctrl", "syscon";
 	reg = <0x02310000 0x200>;
 };

Documentation/devicetree/bindings/clock/zx296702-clk.txt

@@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
 for the full list of zx296702 clock IDs.
 
 
-topclk: topcrm@0x09800000 {
+topclk: topcrm@09800000 {
         compatible = "zte,zx296702-topcrm-clk";
         reg = <0x09800000 0x1000>;
         #clock-cells = <1>;
 };
 
-uart0: serial@0x09405000 {
+uart0: serial@09405000 {
         compatible = "zte,zx296702-uart";
         reg = <0x09405000 0x1000>;
         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

@@ -456,7 +456,7 @@ System ON/OFF key driver
       Definition: this is phandle to the register map node.
 
 EXAMPLE:
-	snvs-pwrkey@0x020cc000 {
+	snvs-pwrkey@020cc000 {
 		compatible = "fsl,sec-v4.0-pwrkey";
 		regmap = <&snvs>;
 		interrupts = <0 4 0x4>
@@ -545,7 +545,7 @@ FULL EXAMPLE
 			interrupts = <93 2>;
 		};
 
-		snvs-pwrkey@0x020cc000 {
+		snvs-pwrkey@020cc000 {
 			compatible = "fsl,sec-v4.0-pwrkey";
 			regmap = <&sec_mon>;
 			interrupts = <0 4 0x4>;

Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt

@@ -9,7 +9,7 @@ Required properties:
 - clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
 
 Example:
-	dfi: dfi@0xff630000 {
+	dfi: dfi@ff630000 {
 		compatible = "rockchip,rk3399-dfi";
 		reg = <0x00 0xff630000 0x00 0x4000>;
 		rockchip,pmu = <&pmugrf>;

Documentation/devicetree/bindings/display/atmel,lcdc.txt

@@ -27,7 +27,7 @@ Optional properties:
 
 Example:
 
-	fb0: fb@0x00500000 {
+	fb0: fb@00500000 {
 		compatible = "atmel,at91sam9g45-lcdc";
 		reg = <0x00500000 0x1000>;
 		interrupts = <23 3 0>;
@@ -41,7 +41,7 @@ Example:
 
 Example for fixed framebuffer memory:
 
-	fb0: fb@0x00500000 {
+	fb0: fb@00500000 {
 		compatible = "atmel,at91sam9263-lcdc";
 		reg = <0x00700000 0x1000 0x70000000 0x200000>;
 		[...]

Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt → Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt

@@ -2,7 +2,7 @@ Toppoly TD028TTEC1 Panel
 ========================
 
 Required properties:
-- compatible: "toppoly,td028ttec1"
+- compatible: "tpo,td028ttec1"
 
 Optional properties:
 - label: a symbolic name for the panel
@@ -14,7 +14,7 @@ Example
 -------
 
 lcd-panel: td028ttec1@0 {
-	compatible = "toppoly,td028ttec1";
+	compatible = "tpo,td028ttec1";
 	reg = <0>;
 	spi-max-frequency = <100000>;
 	spi-cpol;

Documentation/devicetree/bindings/display/renesas,du.txt

@@ -3,6 +3,8 @@
 Required Properties:
 
   - compatible: must be one of the following.
+    - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
+    - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
     - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
     - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -27,10 +29,10 @@ Required Properties:
   - clock-names: Name of the clocks. This property is model-dependent.
     - R8A7779 uses a single functional clock. The clock doesn't need to be
       named.
-    - R8A779[0123456] use one functional clock per channel and one clock per
-      LVDS encoder (if available). The functional clocks must be named "du.x"
-      with "x" being the channel numerical index. The LVDS clocks must be
-      named "lvds.x" with "x" being the LVDS encoder numerical index.
+    - All other DU instances use one functional clock per channel and one
+      clock per LVDS encoder (if available). The functional clocks must be
+      named "du.x" with "x" being the channel numerical index. The LVDS clocks
+      must be named "lvds.x" with "x" being the LVDS encoder numerical index.
     - In addition to the functional and encoder clocks, all DU versions also
       support externally supplied pixel clocks. Those clocks are optional.
       When supplied they must be named "dclkin.x" with "x" being the input
@@ -49,16 +51,18 @@ bindings specified in Documentation/devicetree/bindings/graph.txt.
 The following table lists for each supported model the port number
 corresponding to each DU output.
 
-		Port 0		Port1		Port2		Port3
+                      Port0          Port1          Port2          Port3
 -----------------------------------------------------------------------------
- R8A7779 (H1)	DPAD 0		DPAD 1		-		-
- R8A7790 (H2)	DPAD		LVDS 0		LVDS 1		-
- R8A7791 (M2-W)	DPAD		LVDS 0		-		-
- R8A7792 (V2H)	DPAD 0		DPAD 1		-		-
- R8A7793 (M2-N)	DPAD		LVDS 0		-		-
- R8A7794 (E2)	DPAD 0		DPAD 1		-		-
- R8A7795 (H3)	DPAD		HDMI 0		HDMI 1		LVDS
- R8A7796 (M3-W)	DPAD		HDMI		LVDS		-
+ R8A7743 (RZ/G1M)     DPAD 0         LVDS 0         -              -
+ R8A7745 (RZ/G1E)     DPAD 0         DPAD 1         -              -
+ R8A7779 (R-Car H1)   DPAD 0         DPAD 1         -              -
+ R8A7790 (R-Car H2)   DPAD 0         LVDS 0         LVDS 1         -
+ R8A7791 (R-Car M2-W) DPAD 0         LVDS 0         -              -
+ R8A7792 (R-Car V2H)  DPAD 0         DPAD 1         -              -
+ R8A7793 (R-Car M2-N) DPAD 0         LVDS 0         -              -
+ R8A7794 (R-Car E2)   DPAD 0         DPAD 1         -              -
+ R8A7795 (R-Car H3)   DPAD 0         HDMI 0         HDMI 1         LVDS 0
+ R8A7796 (R-Car M3-W) DPAD 0         HDMI 0         LVDS 0         -
 
 
 Example: R8A7795 (R-Car H3) ES2.0 DU

Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt

@@ -206,21 +206,33 @@ of the following host1x client modules:
     - "nvidia,tegra132-sor": for Tegra132
     - "nvidia,tegra210-sor": for Tegra210
     - "nvidia,tegra210-sor1": for Tegra210
+    - "nvidia,tegra186-sor": for Tegra186
+    - "nvidia,tegra186-sor1": for Tegra186
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
     See ../clocks/clock-bindings.txt for details.
   - clock-names: Must include the following entries:
     - sor: clock input for the SOR hardware
-    - source: source clock for the SOR clock
+    - out: SOR output clock
     - parent: input for the pixel clock
     - dp: reference clock for the SOR clock
     - safe: safe reference for the SOR clock during power up
+
+    For Tegra186 and later:
+    - pad: SOR pad output clock (on Tegra186 and later)
+
+    Obsolete:
+    - source: source clock for the SOR clock (obsolete, use "out" instead)
+
   - resets: Must contain an entry for each entry in reset-names.
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - sor
 
+  Required properties on Tegra186 and later:
+  - nvidia,interface: index of the SOR interface
+
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection

Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt

@@ -47,6 +47,11 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
 HDMI
 ----
 

Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt

@@ -28,6 +28,10 @@ Required properties:
 - ti,hwmods: "dss_dispc"
 - interrupts: the DISPC interrupt
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt

@@ -37,6 +37,10 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt

@@ -36,6 +36,10 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt

@@ -36,6 +36,10 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt

@@ -73,7 +73,7 @@ Hypervisor OS configuration:
 		max-read-transactions = <31>;
 		channel-reset-timeout-cycles = <0x500>;
 
-		hidma_24: dma-controller@0x5c050000 {
+		hidma_24: dma-controller@5c050000 {
 			compatible = "qcom,hidma-1.0";
 			reg = <0 0x5c050000 0x0 0x1000>,
 			      <0 0x5c0b0000 0x0 0x1000>;
@@ -85,7 +85,7 @@ Hypervisor OS configuration:
 
 Guest OS configuration:
 
-	hidma_24: dma-controller@0x5c050000 {
+	hidma_24: dma-controller@5c050000 {
 		compatible = "qcom,hidma-1.0";
 		reg = <0 0x5c050000 0x0 0x1000>,
 		      <0 0x5c0b0000 0x0 0x1000>;

Documentation/devicetree/bindings/dma/zxdma.txt

@@ -13,7 +13,7 @@ Required properties:
 Example:
 
 Controller:
-	dma: dma-controller@0x09c00000{
+	dma: dma-controller@09c00000{
 		compatible = "zte,zx296702-dma";
 		reg = <0x09c00000 0x1000>;
 		clocks = <&topclk ZX296702_DMA_ACLK>;

Documentation/devicetree/bindings/eeprom/at25.txt

@@ -1,7 +1,12 @@
 EEPROMs (SPI) compatible with Atmel at25.
 
 Required properties:
-- compatible : "atmel,at25".
+- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
+  Example "<vendor>,<type>" values:
+    "microchip,25lc040"
+    "st,m95m02"
+    "st,m95256"
+
 - reg : chip select number
 - spi-max-frequency : max spi frequency to use
 - pagesize : size of the eeprom page
@@ -13,7 +18,7 @@ Optional properties:
 - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
 - read-only : this parameter-less property disables writes to the eeprom
 
-Obsolete legacy properties are can be used in place of "size", "pagesize",
+Obsolete legacy properties can be used in place of "size", "pagesize",
 "address-width", and "read-only":
 - at25,byte-len : total eeprom size in bytes
 - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
@@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize",
 Additional compatible properties are also allowed.
 
 Example:
-	at25@0 {
-		compatible = "atmel,at25", "st,m95256";
+	eeprom@0 {
+		compatible = "st,m95256", "atmel,at25";
 		reg = <0>
 		spi-max-frequency = <5000000>;
 		spi-cpha;

Documentation/devicetree/bindings/gpio/gpio-altera.txt

@@ -30,7 +30,7 @@ Optional properties:
 
 Example:
 
-gpio_altr: gpio@0xff200000 {
+gpio_altr: gpio@ff200000 {
 	compatible = "altr,pio-1.0";
 	reg = <0xff200000 0x10>;
 	interrupts = <0 45 4>;

Documentation/devicetree/bindings/gpio/gpio-pca953x.txt

@@ -27,7 +27,7 @@ Required properties:
 	ti,tca6424
 	ti,tca9539
 	ti,tca9554
-	onsemi,pca9654
+	onnn,pca9654
 	exar,xra1202
 
 Optional properties:

Documentation/devicetree/bindings/i2c/i2c-jz4780.txt

@@ -18,7 +18,7 @@ Optional properties:
 Example
 
 / {
-	i2c4: i2c4@0x10054000 {
+	i2c4: i2c4@10054000 {
 		compatible = "ingenic,jz4780-i2c";
 		reg = <0x10054000 0x1000>;
 

Documentation/devicetree/bindings/iio/pressure/hp03.txt

@@ -10,7 +10,7 @@ Required properties:
 
 Example:
 
-hp03@0x77 {
+hp03@77 {
 	compatible = "hoperf,hp03";
 	reg = <0x77>;
 	xclr-gpio = <&portc 0 0x0>;

Documentation/devicetree/bindings/input/touchscreen/bu21013.txt

@@ -15,7 +15,7 @@ Optional properties:
 Example:
 
 	i2c@80110000 {
-		bu21013_tp@0x5c {
+		bu21013_tp@5c {
 			compatible = "rohm,bu21013_tp";
 			reg = <0x5c>;
 			touch-gpio = <&gpio2 20 0x4>;

Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt

@@ -155,7 +155,7 @@ Example:
 		      <0x0 0xe112f000 0 0x02000>,
 		      <0x0 0xe1140000 0 0x10000>,
 		      <0x0 0xe1160000 0 0x10000>;
-		v2m0: v2m@0x8000 {
+		v2m0: v2m@8000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x80000 0 0x1000>;
@@ -163,7 +163,7 @@ Example:
 
 		....
 
-		v2mN: v2m@0x9000 {
+		v2mN: v2m@9000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x90000 0 0x1000>;

Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt

@@ -71,7 +71,7 @@ Example 2:
 	 * An interrupt generating device that is wired to a Meta external
 	 * trigger block.
 	 */
-	uart1: uart@0x02004c00 {
+	uart1: uart@02004c00 {
 		// Interrupt source '5' that is level-sensitive.
 		// Note that there are only two cells as specified in the
 		// interrupt parent's '#interrupt-cells' property.

Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt

@@ -51,7 +51,7 @@ Example 1:
 	/*
 	 * TZ1090 PDC block
 	 */
-	pdc: pdc@0x02006000 {
+	pdc: pdc@02006000 {
 		// This is an interrupt controller node.
 		interrupt-controller;
 

Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt

@@ -39,7 +39,7 @@ Example:
 
 The following is an example from the SPEAr320 SoC dtsi file.
 
-shirq: interrupt-controller@0xb3000000 {
+shirq: interrupt-controller@b3000000 {
 	compatible = "st,spear320-shirq";
 	reg = <0xb3000000 0x1000>;
 	interrupts = <28 29 30 1>;

Documentation/devicetree/bindings/mailbox/altera-mailbox.txt

@@ -14,7 +14,7 @@ Optional properties:
 			depends on the interrupt controller parent.
 
 Example:
-	mbox_tx: mailbox@0x100 {
+	mbox_tx: mailbox@100 {
 		compatible = "altr,mailbox-1.0";
 		reg = <0x100 0x8>;
 		interrupt-parent = < &gic_0 >;
@@ -22,7 +22,7 @@ Example:
 		#mbox-cells = <1>;
 	};
 
-	mbox_rx: mailbox@0x200 {
+	mbox_rx: mailbox@200 {
 		compatible = "altr,mailbox-1.0";
 		reg = <0x200 0x8>;
 		interrupt-parent = < &gic_0 >;
@@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be
 used to give a name to the communication channel to be used by the client user.
 
 Example:
-	mclient0: mclient0@0x400 {
+	mclient0: mclient0@400 {
 		compatible = "client-1.0";
 		reg = <0x400 0x10>;
 		mbox-names = "mbox-tx", "mbox-rx";

Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt

@@ -15,7 +15,7 @@ Optional properties:
 - brcm,use-bcm-hdr:  present if a BCM header precedes each frame.
 
 Example:
-	pdc0: iproc-pdc0@0x612c0000 {
+	pdc0: iproc-pdc0@612c0000 {
 		compatible = "brcm,iproc-pdc-mbox";
 		reg = <0 0x612c0000 0 0x445>;  /* PDC FS0 regs */
 		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/media/exynos5-gsc.txt

@@ -17,7 +17,7 @@ Optional properties:
 
 Example:
 
-gsc_0:  gsc@0x13e00000 {
+gsc_0:  gsc@13e00000 {
 	compatible = "samsung,exynos5250-gsc";
 	reg = <0x13e00000 0x1000>;
 	interrupts = <0 85 0>;

Documentation/devicetree/bindings/media/mediatek-vcodec.txt

@@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 {
                   "vdec_bus_clk_src";
   };
 
-  vcodec_enc: vcodec@0x18002000 {
+  vcodec_enc: vcodec@18002000 {
     compatible = "mediatek,mt8173-vcodec-enc";
     reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
           <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/

Documentation/devicetree/bindings/media/rcar_vin.txt

@@ -44,7 +44,7 @@ Device node example
 	       vin0 = &vin0;
 	};
 
-        vin0: vin@0xe6ef0000 {
+        vin0: vin@e6ef0000 {
                 compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
                 clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
                 reg = <0 0xe6ef0000 0 0x1000>;

Documentation/devicetree/bindings/media/samsung-fimc.txt

@@ -138,7 +138,7 @@ Example:
 		};
 
 		/* MIPI CSI-2 bus IF sensor */
-		s5c73m3: sensor@0x1a {
+		s5c73m3: sensor@1a {
 			compatible = "samsung,s5c73m3";
 			reg = <0x1a>;
 			vddio-supply = <...>;

Documentation/devicetree/bindings/media/sh_mobile_ceu.txt

@@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
 
 Example:
 
-ceu0: ceu@0xfe910000 {
+ceu0: ceu@fe910000 {
 	compatible = "renesas,sh-mobile-ceu";
 	reg = <0xfe910000 0xa0>;
 	interrupt-parent = <&intcs>;

Documentation/devicetree/bindings/media/video-interfaces.txt

@@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
 'port' node which may indicate that at any time only one of the following data
 pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 
-	ceu0: ceu@0xfe910000 {
+	ceu0: ceu@fe910000 {
 		compatible = "renesas,sh-mobile-ceu";
 		reg = <0xfe910000 0xa0>;
 		interrupts = <0x880>;
@@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 		};
 	};
 
-	i2c0: i2c@0xfff20000 {
+	i2c0: i2c@fff20000 {
 		...
-		ov772x_1: camera@0x21 {
+		ov772x_1: camera@21 {
 			compatible = "ovti,ov772x";
 			reg = <0x21>;
 			vddio-supply = <&regulator1>;
@@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 			};
 		};
 
-		imx074: camera@0x1a {
+		imx074: camera@1a {
 			compatible = "sony,imx074";
 			reg = <0x1a>;
 			vddio-supply = <&regulator1>;
@@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 		};
 	};
 
-	csi2: csi2@0xffc90000 {
+	csi2: csi2@ffc90000 {
 		compatible = "renesas,sh-mobile-csi2";
 		reg = <0xffc90000 0x1000>;
 		interrupts = <0x17a0>;

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -46,7 +46,7 @@ Optional properties:
 
 Example:
 
-emif1: emif@0x4c000000 {
+emif1: emif@4c000000 {
 	compatible	= "ti,emif-4d";
 	ti,hwmods	= "emif2";
 	phy-type	= <1>;

Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt

@@ -13,7 +13,7 @@ Required properties:
 
 Example:
 
-devctrl: device-state-control@0x02620000 {
+devctrl: device-state-control@02620000 {
 	compatible = "ti,keystone-devctrl", "syscon";
 	reg = <0x02620000 0x1000>;
 };

Documentation/devicetree/bindings/misc/brcm,kona-smc.txt

@@ -9,7 +9,7 @@ Required properties:
 - reg : Location and size of bounce buffer
 
 Example:
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; //1 KiB in SRAM
 	};

Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt

@@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties.
 
 Example:
 
-sdio2: sdio@0x3f1a0000 {
+sdio2: sdio@3f1a0000 {
 	compatible = "brcm,kona-sdhci";
 	reg = <0x3f1a0000 0x10000>;
 	clocks = <&sdio3_clk>;

Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt

@@ -24,7 +24,7 @@ Optional properties:
 
 Example:
 
-sdhci0: sdhci@0x18041000 {
+sdhci0: sdhci@18041000 {
 	compatible = "brcm,sdhci-iproc-cygnus";
 	reg = <0x18041000 0x100>;
 	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt

@@ -55,7 +55,7 @@ Examples:
 
 [hwmod populated DMA resources]
 
-	mmc1: mmc@0x4809c000 {
+	mmc1: mmc@4809c000 {
 		compatible = "ti,omap4-hsmmc";
 		reg = <0x4809c000 0x400>;
 		ti,hwmods = "mmc1";
@@ -67,7 +67,7 @@ Examples:
 
 [generic DMA request binding]
 
-	mmc1: mmc@0x4809c000 {
+	mmc1: mmc@4809c000 {
 		compatible = "ti,omap4-hsmmc";
 		reg = <0x4809c000 0x400>;
 		ti,hwmods = "mmc1";

Documentation/devicetree/bindings/mtd/gpmc-nor.txt

@@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 {
 			label = "bootloader-nor";
 			reg = <0 0x40000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "params-nor";
 			reg = <0x40000 0x40000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "kernel-nor";
 			reg = <0x80000 0x200000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "filesystem-nor";
 			reg = <0x240000 0x7d80000>;
 		};

Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

@@ -13,7 +13,6 @@ Required properties:
                  at25df321a
                  at25df641
                  at26df081a
-                 en25s64
                  mr25h128
                  mr25h256
                  mr25h10
@@ -33,7 +32,6 @@ Required properties:
                  s25fl008k
                  s25fl064k
                  sst25vf040b
-                 sst25wf040b
                  m25p40
                  m25p80
                  m25p16

Documentation/devicetree/bindings/mtd/mtk-nand.txt

@@ -131,7 +131,7 @@ Example:
 				read-only;
 				reg = <0x00000000 0x00400000>;
 			};
-			android@0x00400000 {
+			android@00400000 {
 				label = "android";
 				reg = <0x00400000 0x12c00000>;
 			};

Documentation/devicetree/bindings/net/altera_tse.txt

@@ -52,7 +52,7 @@ Optional properties:
 
 Example:
 
-	tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
+	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
 		compatible = "altr,tse-msgdma-1.0";
 		reg =	<0x00000001 0x00000000 0x00000400>,
 			<0x00000001 0x00000460 0x00000020>,
@@ -90,7 +90,7 @@ Example:
 		};
 	};
 
-	tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
+	tse_sub_1_eth_tse_0: ethernet@1,00001000 {
 		compatible = "altr,tse-msgdma-1.0";
 		reg = 	<0x00000001 0x00001000 0x00000400>,
 			<0x00000001 0x00001460 0x00000020>,

Documentation/devicetree/bindings/net/mdio.txt

@@ -18,7 +18,7 @@ Example :
 This example shows these optional properties, plus other properties
 required for the TI Davinci MDIO driver.
 
-	davinci_mdio: ethernet@0x5c030000 {
+	davinci_mdio: ethernet@5c030000 {
 		compatible = "ti,davinci_mdio";
 		reg = <0x5c030000 0x1000>;
 		#address-cells = <1>;

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

@@ -28,7 +28,7 @@ Required properties:
 
 Example:
 
-gmii_to_sgmii_converter: phy@0x100000240 {
+gmii_to_sgmii_converter: phy@100000240 {
 	compatible = "altr,gmii-to-sgmii-2.0";
 	reg = <0x00000001 0x00000240 0x00000008>,
 		<0x00000001 0x00000200 0x00000040>;

Documentation/devicetree/bindings/nios2/nios2.txt

@@ -36,7 +36,7 @@ Optional properties:
 
 Example:
 
-cpu@0x0 {
+cpu@0 {
 	device_type = "cpu";
 	compatible = "altr,nios2-1.0";
 	reg = <0>;

Documentation/devicetree/bindings/pci/altera-pcie.txt

@@ -25,7 +25,7 @@ Optional properties:
 - bus-range:	PCI bus numbers covered
 
 Example
-	pcie_0: pcie@0xc00000000 {
+	pcie_0: pcie@c00000000 {
 		compatible = "altr,pcie-root-port-1.0";
 		reg = <0xc0000000 0x20000000>,
 			<0xff220000 0x00004000>;

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie:
 
 Example:
 
-	pcie@0x01000000 {
+	pcie@01000000 {
 		compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 		reg = <0x01ffc000 0x04000>,
 		      <0x01f00000 0x80000>;

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt

@@ -21,7 +21,7 @@ Optional properties:
 - dma-coherent: Present if DMA operations are coherent.
 
 Hip05 Example (note that Hip06 is the same except compatible):
-	pcie@0xb0080000 {
+	pcie@b0080000 {
 		compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
 		reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
 		reg-names = "rc_dbi", "config";

Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt

@@ -45,7 +45,7 @@ Optional properties:
 - usb3_vbus-supply : regulator phandle for controller usb3 vbus
 
 Example:
-	usbphy: phy@0x01c13400 {
+	usbphy: phy@01c13400 {
 		#phy-cells = <1>;
 		compatible = "allwinner,sun4i-a10-usb-phy";
 		/* phy base regs, phy1 pmu reg, phy2 pmu reg */

Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt

@@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 For example:
 
-	pinmux: pinmux@0x0301d0c8 {
+	pinmux: pinmux@0301d0c8 {
 		compatible = "brcm,cygnus-pinmux";
 		reg = <0x0301d0c8 0x1b0>;
 

Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt

@@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following:
 
 For a specific board, if it wants to use sd1,
 it can add the following to its board-specific .dts file.
-sd1: sd@0x12340000 {
+sd1: sd@12340000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_pmx0>;
 }
 
 or
 
-sd1: sd@0x12340000 {
+sd1: sd@12340000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_pmx1>;
 }

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following:
 
 For a specific board, if it wants to use uart2 without hardware flow control,
 it can add the following to its board-specific .dts file.
-uart2: uart@0xb0070000 {
+uart2: uart@b0070000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_noflow_pins_a>;
 }

Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt

@@ -136,7 +136,7 @@ Example for rk3188:
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@0x2000a000 {
+		gpio0: gpio0@2000a000 {
 			compatible = "rockchip,rk3188-gpio-bank0";
 			reg = <0x2000a000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -149,7 +149,7 @@ Example for rk3188:
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@0x2003c000 {
+		gpio1: gpio1@2003c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003c000 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/regulator/regulator.txt

@@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2),
 		...
 	};
 
-	mmc: mmc@0x0 {
+	mmc: mmc@0 {
 		...
 		...
 		vmmc-supply = <&twl_reg1>;

Documentation/devicetree/bindings/serial/efm32-uart.txt

@@ -12,7 +12,7 @@ Optional properties:
 
 Example:
 
-uart@0x4000c400 {
+uart@4000c400 {
 	compatible = "energymicro,efm32-uart";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15>;

Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt

@@ -14,7 +14,7 @@ Required properties:
 
 
 Example:
-	ps20: ps2@0x01c2a000 {
+	ps20: ps2@01c2a000 {
 		compatible = "allwinner,sun4i-a10-ps2";
 		reg = <0x01c2a000 0x400>;
 		interrupts = <0 62 4>;

Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt

@@ -220,7 +220,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000>,
 			      <0x2a0f000 0x100>,
 			      <0x2a0c000 0x3c8>,

Documentation/devicetree/bindings/sound/adi,axi-i2s.txt

@@ -21,7 +21,7 @@ please check:
 
 Example:
 
-	i2s: i2s@0x77600000 {
+	i2s: i2s@77600000 {
 		compatible = "adi,axi-i2s-1.00.a";
 		reg = <0x77600000 0x1000>;
 		clocks = <&clk 15>, <&audio_clock>;

Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt

@@ -20,7 +20,7 @@ please check:
 
 Example:
 
-	spdif: spdif@0x77400000 {
+	spdif: spdif@77400000 {
 		compatible = "adi,axi-spdif-tx-1.00.a";
 		reg = <0x77600000 0x1000>;
 		clocks = <&clk 15>, <&audio_clock>;

Documentation/devicetree/bindings/sound/ak4613.txt

@@ -20,7 +20,7 @@ Optional properties:
 Example:
 
 &i2c {
-	ak4613: ak4613@0x10 {
+	ak4613: ak4613@10 {
 		compatible = "asahi-kasei,ak4613";
 		reg = <0x10>;
 	};

Documentation/devicetree/bindings/sound/ak4642.txt

@@ -17,7 +17,7 @@ Optional properties:
 Example 1:
 
 &i2c {
-	ak4648: ak4648@0x12 {
+	ak4648: ak4648@12 {
 		compatible = "asahi-kasei,ak4642";
 		reg = <0x12>;
 	};

Documentation/devicetree/bindings/sound/da7218.txt

@@ -73,7 +73,7 @@ Example:
 		compatible = "dlg,da7218";
 		reg = <0x1a>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		wakeup-source;
 
 		VDD-supply = <&reg_audio>;

Documentation/devicetree/bindings/sound/da7219.txt

@@ -77,7 +77,7 @@ Example:
 		reg = <0x1a>;
 
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 
 		VDD-supply = <&reg_audio>;
 		VDDMIC-supply = <&reg_audio>;

Documentation/devicetree/bindings/sound/max98371.txt

@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 &i2c {
-	max98371: max98371@0x31 {
+	max98371: max98371@31 {
 		compatible = "maxim,max98371";
 		reg = <0x31>;
 	};

Documentation/devicetree/bindings/sound/max9867.txt

@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 &i2c {
-	max9867: max9867@0x18 {
+	max9867: max9867@18 {
 		compatible = "maxim,max9867";
 		reg = <0x18>;
 	};

Documentation/devicetree/bindings/sound/renesas,fsi.txt

@@ -20,7 +20,7 @@ Required properties:
 
 Example:
 
-sh_fsi2: sh_fsi2@0xec230000 {
+sh_fsi2: sh_fsi2@ec230000 {
 	compatible = "renesas,sh_fsi2";
 	reg = <0xec230000 0x400>;
 	interrupts = <0 146 0x4>;

Documentation/devicetree/bindings/sound/rockchip-spdif.txt

@@ -33,7 +33,7 @@ Required properties on RK3288:
 
 Example for the rk3188 SPDIF controller:
 
-spdif: spdif@0x1011e000 {
+spdif: spdif@1011e000 {
 	compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
 	reg = <0x1011e000 0x2000>;
 	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt

@@ -51,7 +51,7 @@ Optional properties:
 
 Example:
 
-	sti_uni_player1: sti-uni-player@0x8D81000 {
+	sti_uni_player1: sti-uni-player@8D81000 {
 		compatible = "st,stih407-uni-player-hdmi";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -63,7 +63,7 @@ Example:
 		st,tdm-mode = <1>;
 	};
 
-	sti_uni_player2: sti-uni-player@0x8D82000 {
+	sti_uni_player2: sti-uni-player@8D82000 {
 		compatible = "st,stih407-uni-player-pcm-out";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -74,7 +74,7 @@ Example:
 		dma-names = "tx";
 	};
 
-	sti_uni_player3: sti-uni-player@0x8D85000 {
+	sti_uni_player3: sti-uni-player@8D85000 {
 		compatible = "st,stih407-uni-player-spdif";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -85,7 +85,7 @@ Example:
 		dma-names = "tx";
 	};
 
-	sti_uni_reader1: sti-uni-reader@0x8D84000 {
+	sti_uni_reader1: sti-uni-reader@8D84000 {
 		compatible = "st,stih407-uni-reader-hdmi";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;

Documentation/devicetree/bindings/spi/efm32-spi.txt

@@ -19,7 +19,7 @@ Recommended properties :
 
 Example:
 
-spi1: spi@0x4000c400 { /* USART1 */
+spi1: spi@4000c400 { /* USART1 */
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "energymicro,efm32-spi";

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

@@ -12,24 +12,30 @@ Required properties:
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- cs-gpios : Specifies the gpio pins to be used for chipselects.
 - clocks : Clock specifiers for both ipg and per clocks.
 - clock-names : Clock names should include both "ipg" and "per"
 See the clock consumer binding,
 	Documentation/devicetree/bindings/clock/clock-bindings.txt
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-		Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
 
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
+Recommended properties:
+- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt.  While the native chip
+select lines can be used, they appear to always generate a pulse between each
+word of a transfer.  Most use cases will require GPIO based chip selects to
+generate a valid transaction.
 
 Optional properties:
+- num-cs :  Number of total chip selects, see spi-bus.txt.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: DMA request names, if present, should include "tx" and "rx".
 - fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
 controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
 the SPI_READY mode-flag needs to be set too.
 Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
 
+Obsolete properties:
+- fsl,spi-num-chipselects : Contains the number of the chipselect
+
 Example:
 
 ecspi@70010000 {

Documentation/devicetree/bindings/thermal/thermal.txt

@@ -239,7 +239,7 @@ cpus {
 	 * A simple fan controller which supports 10 speeds of operation
 	 * (represented as 0-9).
 	 */
-	fan0: fan@0x48 {
+	fan0: fan@48 {
 		...
 		cooling-min-level = <0>;
 		cooling-max-level = <9>;
@@ -252,7 +252,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0x0000ED00 {
+	bandgap0: bandgap@0000ED00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -330,7 +330,7 @@ ocp {
 	/*
 	 * A simple IC with several bandgap temperature sensors.
 	 */
-	bandgap0: bandgap@0x0000ED00 {
+	bandgap0: bandgap@0000ED00 {
 		...
 		#thermal-sensor-cells = <1>;
 	};
@@ -447,7 +447,7 @@ one thermal zone.
 	/*
 	 * A simple IC with a single temperature sensor.
 	 */
-	adc: sensor@0x49 {
+	adc: sensor@49 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -458,7 +458,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0x0000ED00 {
+	bandgap0: bandgap@0000ED00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -516,7 +516,7 @@ with many sensors and many cooling devices.
 	/*
 	 * An IC with several temperature sensor.
 	 */
-	adc_dummy: sensor@0x50 {
+	adc_dummy: sensor@50 {
 		...
 		#thermal-sensor-cells = <1>; /* sensor internal ID */
 	};

Documentation/devicetree/bindings/ufs/ufs-qcom.txt

@@ -32,7 +32,7 @@ Optional properties:
 
 Example:
 
-	ufsphy1: ufsphy@0xfc597000 {
+	ufsphy1: ufsphy@fc597000 {
 		compatible = "qcom,ufs-phy-qmp-20nm";
 		reg = <0xfc597000 0x800>;
 		reg-names = "phy_mem";
@@ -53,7 +53,7 @@ Example:
 			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
 	};
 
-	ufshc@0xfc598000 {
+	ufshc@fc598000 {
 		...
 		phys = <&ufsphy1>;
 		phy-names = "ufsphy";

Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt

@@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply
 regulators or clocks are always on.
 
 Example:
-	ufshc@0xfc598000 {
+	ufshc@fc598000 {
 		compatible = "jedec,ufs-1.1";
 		reg = <0xfc598000 0x800>;
 		interrupts = <0 28 0>;

Documentation/devicetree/bindings/usb/am33xx-usb.txt

@@ -95,6 +95,7 @@ usb: usb@47400000 {
 		reg = <0x47401300 0x100>;
 		reg-names = "phy";
 		ti,ctrl_mod = <&ctrl_mod>;
+		#phy-cells = <0>;
 	};
 
 	usb0: usb@47401000 {
@@ -141,6 +142,7 @@ usb: usb@47400000 {
 		reg = <0x47401b00 0x100>;
 		reg-names = "phy";
 		ti,ctrl_mod = <&ctrl_mod>;
+		#phy-cells = <0>;
 	};
 
 	usb1: usb@47401800 {

Documentation/devicetree/bindings/usb/ehci-st.txt

@@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
 
-	ehci1: usb@0xfe203e00 {
+	ehci1: usb@fe203e00 {
 		compatible = "st,st-ehci-300x";
 		reg = <0xfe203e00 0x100>;
 		interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;

Documentation/devicetree/bindings/usb/ohci-st.txt

@@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
 
-	ohci0: usb@0xfe1ffc00 {
+	ohci0: usb@fe1ffc00 {
 		compatible = "st,st-ohci-300x";
 		reg = <0xfe1ffc00 0x100>;
 		interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;

Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt

@@ -6,7 +6,7 @@ reg: Register address and length for watchdog registers
 
 Example:
 
-watchdog: jz4740-watchdog@0x10002000 {
+watchdog: jz4740-watchdog@10002000 {
 	compatible = "ingenic,jz4740-watchdog";
 	reg = <0x10002000 0x100>;
 };

Documentation/driver-api/dmaengine/client.rst

@@ -185,7 +185,7 @@ The details of these operations are:
       void dma_async_issue_pending(struct dma_chan *chan);
 
 Further APIs:
-------------
+-------------
 
 1. Terminate APIs
 

Documentation/driver-api/pci.rst

@@ -25,9 +25,6 @@ PCI Support Library
 .. kernel-doc:: drivers/pci/irq.c
    :export:
 
-.. kernel-doc:: drivers/pci/htirq.c
-   :export:
-
 .. kernel-doc:: drivers/pci/probe.c
    :export:
 

Documentation/filesystems/nilfs2.txt

@@ -25,8 +25,8 @@ available from the following download page.  At least "mkfs.nilfs2",
 cleaner or garbage collector) are required.  Details on the tools are
 described in the man pages included in the package.
 
-Project web page:    http://nilfs.sourceforge.net/
-Download page:       http://nilfs.sourceforge.net/en/download.html
+Project web page:    https://nilfs.sourceforge.io/
+Download page:       https://nilfs.sourceforge.io/en/download.html
 List info:           http://vger.kernel.org/vger-lists.html#linux-nilfs
 
 Caveats

Documentation/filesystems/overlayfs.txt

@@ -156,6 +156,40 @@ handle it in two different ways:
    root of the overlay.  Finally the directory is moved to the new
    location.
 
+There are several ways to tune the "redirect_dir" feature.
+
+Kernel config options:
+
+- OVERLAY_FS_REDIRECT_DIR:
+    If this is enabled, then redirect_dir is turned on by  default.
+- OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW:
+    If this is enabled, then redirects are always followed by default. Enabling
+    this results in a less secure configuration.  Enable this option only when
+    worried about backward compatibility with kernels that have the redirect_dir
+    feature and follow redirects even if turned off.
+
+Module options (can also be changed through /sys/module/overlay/parameters/*):
+
+- "redirect_dir=BOOL":
+    See OVERLAY_FS_REDIRECT_DIR kernel config option above.
+- "redirect_always_follow=BOOL":
+    See OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW kernel config option above.
+- "redirect_max=NUM":
+    The maximum number of bytes in an absolute redirect (default is 256).
+
+Mount options:
+
+- "redirect_dir=on":
+    Redirects are enabled.
+- "redirect_dir=follow":
+    Redirects are not created, but followed.
+- "redirect_dir=off":
+    Redirects are not created and only followed if "redirect_always_follow"
+    feature is enabled in the kernel/module config.
+- "redirect_dir=nofollow":
+    Redirects are not created and not followed (equivalent to "redirect_dir=off"
+    if "redirect_always_follow" feature is not enabled).
+
 Non-directories
 ---------------