Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas,
  megaraid_sas, ses) plus an assortment of minor updates.

  There's also an update to ufs which adds new phy drivers and finally a
  new logging infrastructure for SCSI"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits)
  scsi_logging: return void for dev_printk() functions
  scsi: print single-character strings with seq_putc
  scsi: merge consecutive seq_puts calls
  scsi: replace seq_printf with seq_puts
  aha152x: replace seq_printf with seq_puts
  advansys: replace seq_printf with seq_puts
  scsi: remove SPRINTF macro
  sg: remove an unused variable
  hpsa: Use local workqueues instead of system workqueues
  hpsa: add in P840ar controller model name
  hpsa: add in gen9 controller model names
  hpsa: detect and report failures changing controller transport modes
  hpsa: shorten the wait for the CISS doorbell mode change ack
  hpsa: refactor duplicated scan completion code into a new routine
  hpsa: move SG descriptor set-up out of hpsa_scatter_gather()
  hpsa: do not use function pointers in fast path command submission
  hpsa: print CDBs instead of kernel virtual addresses for uncommon errors
  hpsa: do not use a void pointer for scsi_cmd field of struct CommandList
  hpsa: return failed from device reset/abort handlers
  hpsa: check for ctlr lockup after command allocation in main io path
  ...

drivers/ata/libata-eh.c

@@ -2481,7 +2481,6 @@ static void ata_eh_link_report(struct ata_link *link)
 	for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
 		struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
 		struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
-		const u8 *cdb = qc->cdb;
 		char data_buf[20] = "";
 		char cdb_buf[70] = "";
 
@@ -2509,16 +2508,15 @@ static void ata_eh_link_report(struct ata_link *link)
 		}
 
 		if (ata_is_atapi(qc->tf.protocol)) {
-			if (qc->scsicmd)
-				scsi_print_command(qc->scsicmd);
-			else
-				snprintf(cdb_buf, sizeof(cdb_buf),
-				 "cdb %02x %02x %02x %02x %02x %02x %02x %02x  "
-				 "%02x %02x %02x %02x %02x %02x %02x %02x\n         ",
-				 cdb[0], cdb[1], cdb[2], cdb[3],
-				 cdb[4], cdb[5], cdb[6], cdb[7],
-				 cdb[8], cdb[9], cdb[10], cdb[11],
-				 cdb[12], cdb[13], cdb[14], cdb[15]);
+			const u8 *cdb = qc->cdb;
+			size_t cdb_len = qc->dev->cdb_len;
+
+			if (qc->scsicmd) {
+				cdb = qc->scsicmd->cmnd;
+				cdb_len = qc->scsicmd->cmd_len;
+			}
+			__scsi_format_command(cdb_buf, sizeof(cdb_buf),
+					      cdb, cdb_len);
 		} else {
 			const char *descr = ata_get_cmd_descript(cmd->command);
 			if (descr)

drivers/misc/enclosure.c

@@ -145,8 +145,11 @@ enclosure_register(struct device *dev, const char *name, int components,
 	if (err)
 		goto err;
 
-	for (i = 0; i < components; i++)
+	for (i = 0; i < components; i++) {
 		edev->component[i].number = -1;
+		edev->component[i].slot = -1;
+		edev->component[i].power_status = 1;
+	}
 
 	mutex_lock(&container_list_lock);
 	list_add_tail(&edev->node, &container_list);
@@ -273,27 +276,26 @@ enclosure_component_find_by_name(struct enclosure_device *edev,
 static const struct attribute_group *enclosure_component_groups[];
 
 /**
- * enclosure_component_register - add a particular component to an enclosure
+ * enclosure_component_alloc - prepare a new enclosure component
  * @edev:	the enclosure to add the component
  * @num:	the device number
  * @type:	the type of component being added
  * @name:	an optional name to appear in sysfs (leave NULL if none)
  *
- * Registers the component.  The name is optional for enclosures that
- * give their components a unique name.  If not, leave the field NULL
- * and a name will be assigned.
+ * The name is optional for enclosures that give their components a unique
+ * name.  If not, leave the field NULL and a name will be assigned.
  *
  * Returns a pointer to the enclosure component or an error.
  */
 struct enclosure_component *
-enclosure_component_register(struct enclosure_device *edev,
-			     unsigned int number,
-			     enum enclosure_component_type type,
-			     const char *name)
+enclosure_component_alloc(struct enclosure_device *edev,
+			  unsigned int number,
+			  enum enclosure_component_type type,
+			  const char *name)
 {
 	struct enclosure_component *ecomp;
 	struct device *cdev;
-	int err, i;
+	int i;
 	char newname[COMPONENT_NAME_SIZE];
 
 	if (number >= edev->components)
@@ -327,14 +329,30 @@ enclosure_component_register(struct enclosure_device *edev,
 	cdev->release = enclosure_component_release;
 	cdev->groups = enclosure_component_groups;
 
+	return ecomp;
+}
+EXPORT_SYMBOL_GPL(enclosure_component_alloc);
+
+/**
+ * enclosure_component_register - publishes an initialized enclosure component
+ * @ecomp:	component to add
+ *
+ * Returns 0 on successful registration, releases the component otherwise
+ */
+int enclosure_component_register(struct enclosure_component *ecomp)
+{
+	struct device *cdev;
+	int err;
+
+	cdev = &ecomp->cdev;
 	err = device_register(cdev);
 	if (err) {
 		ecomp->number = -1;
 		put_device(cdev);
-		return ERR_PTR(err);
+		return err;
 	}
 
-	return ecomp;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(enclosure_component_register);
 
@@ -417,8 +435,21 @@ static ssize_t components_show(struct device *cdev,
 }
 static DEVICE_ATTR_RO(components);
 
+static ssize_t id_show(struct device *cdev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct enclosure_device *edev = to_enclosure_device(cdev);
+
+	if (edev->cb->show_id)
+		return edev->cb->show_id(edev, buf);
+	return -EINVAL;
+}
+static DEVICE_ATTR_RO(id);
+
 static struct attribute *enclosure_class_attrs[] = {
 	&dev_attr_components.attr,
+	&dev_attr_id.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(enclosure_class);
@@ -553,6 +584,40 @@ static ssize_t set_component_locate(struct device *cdev,
 	return count;
 }
 
+static ssize_t get_component_power_status(struct device *cdev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+	struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+	if (edev->cb->get_power_status)
+		edev->cb->get_power_status(edev, ecomp);
+	return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off");
+}
+
+static ssize_t set_component_power_status(struct device *cdev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t count)
+{
+	struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+	struct enclosure_component *ecomp = to_enclosure_component(cdev);
+	int val;
+
+	if (strncmp(buf, "on", 2) == 0 &&
+	    (buf[2] == '\n' || buf[2] == '\0'))
+		val = 1;
+	else if (strncmp(buf, "off", 3) == 0 &&
+	    (buf[3] == '\n' || buf[3] == '\0'))
+		val = 0;
+	else
+		return -EINVAL;
+
+	if (edev->cb->set_power_status)
+		edev->cb->set_power_status(edev, ecomp, val);
+	return count;
+}
+
 static ssize_t get_component_type(struct device *cdev,
 				  struct device_attribute *attr, char *buf)
 {
@@ -561,6 +626,20 @@ static ssize_t get_component_type(struct device *cdev,
 	return snprintf(buf, 40, "%s\n", enclosure_type[ecomp->type]);
 }
 
+static ssize_t get_component_slot(struct device *cdev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct enclosure_component *ecomp = to_enclosure_component(cdev);
+	int slot;
+
+	/* if the enclosure does not override then use 'number' as a stand-in */
+	if (ecomp->slot >= 0)
+		slot = ecomp->slot;
+	else
+		slot = ecomp->number;
+
+	return snprintf(buf, 40, "%d\n", slot);
+}
 
 static DEVICE_ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault,
 		    set_component_fault);
@@ -570,14 +649,19 @@ static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active,
 		   set_component_active);
 static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate,
 		   set_component_locate);
+static DEVICE_ATTR(power_status, S_IRUGO | S_IWUSR, get_component_power_status,
+		   set_component_power_status);
 static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL);
+static DEVICE_ATTR(slot, S_IRUGO, get_component_slot, NULL);
 
 static struct attribute *enclosure_component_attrs[] = {
 	&dev_attr_fault.attr,
 	&dev_attr_status.attr,
 	&dev_attr_active.attr,
 	&dev_attr_locate.attr,
+	&dev_attr_power_status.attr,
 	&dev_attr_type.attr,
+	&dev_attr_slot.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(enclosure_component);

drivers/phy/Kconfig

@@ -277,4 +277,11 @@ config PHY_STIH41X_USB
 	  Enable this to support the USB transceiver that is part of
 	  STMicroelectronics STiH41x SoC series.
 
+config PHY_QCOM_UFS
+	tristate "Qualcomm UFS PHY driver"
+	depends on OF && ARCH_MSM
+	select GENERIC_PHY
+	help
+	  Support for UFS PHY on QCOM chipsets.
+
 endmenu

drivers/phy/Makefile

@@ -34,3 +34,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
 obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
+obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o
+obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o
+obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o

drivers/phy/phy-qcom-ufs-i.h

@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_I_H_
+#define UFS_QCOM_PHY_I_H_
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/phy/phy-qcom-ufs.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
+({ \
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+	might_sleep_if(timeout_us); \
+	for (;;) { \
+		(val) = readl(addr); \
+		if (cond) \
+			break; \
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
+			(val) = readl(addr); \
+			break; \
+		} \
+		if (sleep_us) \
+			usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
+#define UFS_QCOM_PHY_CAL_ENTRY(reg, val)	\
+	{				\
+		.reg_offset = reg,	\
+		.cfg_value = val,	\
+	}
+
+#define UFS_QCOM_PHY_NAME_LEN	30
+
+enum {
+	MASK_SERDES_START       = 0x1,
+	MASK_PCS_READY          = 0x1,
+};
+
+enum {
+	OFFSET_SERDES_START     = 0x0,
+};
+
+struct ufs_qcom_phy_stored_attributes {
+	u32 att;
+	u32 value;
+};
+
+
+struct ufs_qcom_phy_calibration {
+	u32 reg_offset;
+	u32 cfg_value;
+};
+
+struct ufs_qcom_phy_vreg {
+	const char *name;
+	struct regulator *reg;
+	int max_uA;
+	int min_uV;
+	int max_uV;
+	bool enabled;
+	bool is_always_on;
+};
+
+struct ufs_qcom_phy {
+	struct list_head list;
+	struct device *dev;
+	void __iomem *mmio;
+	void __iomem *dev_ref_clk_ctrl_mmio;
+	struct clk *tx_iface_clk;
+	struct clk *rx_iface_clk;
+	bool is_iface_clk_enabled;
+	struct clk *ref_clk_src;
+	struct clk *ref_clk_parent;
+	struct clk *ref_clk;
+	bool is_ref_clk_enabled;
+	bool is_dev_ref_clk_enabled;
+	struct ufs_qcom_phy_vreg vdda_pll;
+	struct ufs_qcom_phy_vreg vdda_phy;
+	struct ufs_qcom_phy_vreg vddp_ref_clk;
+	unsigned int quirks;
+
+	/*
+	* If UFS link is put into Hibern8 and if UFS PHY analog hardware is
+	* power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
+	* exit might fail even after powering on UFS PHY analog hardware.
+	* Enabling this quirk will help to solve above issue by doing
+	* custom PHY settings just before PHY analog power collapse.
+	*/
+	#define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE	BIT(0)
+
+	u8 host_ctrl_rev_major;
+	u16 host_ctrl_rev_minor;
+	u16 host_ctrl_rev_step;
+
+	char name[UFS_QCOM_PHY_NAME_LEN];
+	struct ufs_qcom_phy_calibration *cached_regs;
+	int cached_regs_table_size;
+	bool is_powered_on;
+	struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+};
+
+/**
+ * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
+ * specific implementation per phy. Each UFS phy, should implement
+ * those functions according to its spec and requirements
+ * @calibrate_phy: pointer to a function that calibrate the phy
+ * @start_serdes: pointer to a function that starts the serdes
+ * @is_physical_coding_sublayer_ready: pointer to a function that
+ * checks pcs readiness. returns 0 for success and non-zero for error.
+ * @set_tx_lane_enable: pointer to a function that enable tx lanes
+ * @power_control: pointer to a function that controls analog rail of phy
+ * and writes to QSERDES_RX_SIGDET_CNTRL attribute
+ */
+struct ufs_qcom_phy_specific_ops {
+	int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
+	void (*start_serdes)(struct ufs_qcom_phy *phy);
+	int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
+	void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
+	void (*power_control)(struct ufs_qcom_phy *phy, bool val);
+};
+
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
+int ufs_qcom_phy_power_on(struct phy *generic_phy);
+int ufs_qcom_phy_power_off(struct phy *generic_phy);
+int ufs_qcom_phy_exit(struct phy *generic_phy);
+int ufs_qcom_phy_init_clks(struct phy *generic_phy,
+			struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+			struct ufs_qcom_phy *phy_common);
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+		       struct ufs_qcom_phy *ufs_qcom_phy);
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+			struct ufs_qcom_phy *common_cfg,
+			struct phy_ops *ufs_qcom_phy_gen_ops,
+			struct ufs_qcom_phy_specific_ops *phy_spec_ops);
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+			struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
+			struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
+			bool is_rate_B);
+#endif

drivers/phy/phy-qcom-ufs-qmp-14nm.c

@@ -0,0 +1,201 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-qmp-14nm.h"
+
+#define UFS_PHY_NAME "ufs_phy_qmp_14nm"
+#define UFS_PHY_VDDA_PHY_UV	(925000)
+
+static
+int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+					bool is_rate_B)
+{
+	int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
+	int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+	int err;
+
+	err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A,
+		tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B);
+
+	if (err)
+		dev_err(ufs_qcom_phy->dev,
+			"%s: ufs_qcom_phy_calibrate() failed %d\n",
+			__func__, err);
+	return err;
+}
+
+static
+void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
+{
+	phy_common->quirks =
+		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+}
+
+static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy);
+	struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+	int err;
+
+	err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+	if (err) {
+		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+	if (err) {
+		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
+			__func__, err);
+		goto out;
+	}
+	phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
+	phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
+
+	ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common);
+
+out:
+	return err;
+}
+
+static
+void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
+{
+	writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+	/*
+	 * Before any transactions involving PHY, ensure PHY knows
+	 * that it's analog rail is powered ON (or OFF).
+	 */
+	mb();
+}
+
+static inline
+void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
+{
+	/*
+	 * 14nm PHY does not have TX_LANE_ENABLE register.
+	 * Implement this function so as not to propagate error to caller.
+	 */
+}
+
+static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy)
+{
+	u32 tmp;
+
+	tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+	tmp &= ~MASK_SERDES_START;
+	tmp |= (1 << OFFSET_SERDES_START);
+	writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+	/* Ensure register value is committed */
+	mb();
+}
+
+static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
+{
+	int err = 0;
+	u32 val;
+
+	err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
+		val, (val & MASK_PCS_READY), 10, 1000000);
+	if (err)
+		dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
+			__func__, err);
+	return err;
+}
+
+static struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
+	.init		= ufs_qcom_phy_qmp_14nm_init,
+	.exit		= ufs_qcom_phy_exit,
+	.power_on	= ufs_qcom_phy_power_on,
+	.power_off	= ufs_qcom_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
+	.calibrate_phy		= ufs_qcom_phy_qmp_14nm_phy_calibrate,
+	.start_serdes		= ufs_qcom_phy_qmp_14nm_start_serdes,
+	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
+	.set_tx_lane_enable	= ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
+	.power_control		= ufs_qcom_phy_qmp_14nm_power_control,
+};
+
+static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+	struct ufs_qcom_phy_qmp_14nm *phy;
+	int err = 0;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		dev_err(dev, "%s: failed to allocate phy\n", __func__);
+		err = -ENOMEM;
+		goto out;
+	}
+
+	generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+				&ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
+
+	if (!generic_phy) {
+		dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+			__func__);
+		err = -EIO;
+		goto out;
+	}
+
+	phy_set_drvdata(generic_phy, phy);
+
+	strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+		sizeof(phy->common_cfg.name));
+
+out:
+	return err;
+}
+
+static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy = to_phy(dev);
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+	int err = 0;
+
+	err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+	if (err)
+		dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+			__func__, err);
+
+	return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = {
+	{.compatible = "qcom,ufs-phy-qmp-14nm"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = {
+	.probe = ufs_qcom_phy_qmp_14nm_probe,
+	.remove = ufs_qcom_phy_qmp_14nm_remove,
+	.driver = {
+		.of_match_table = ufs_qcom_phy_qmp_14nm_of_match,
+		.name = "ufs_qcom_phy_qmp_14nm",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_14nm_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-qcom-ufs-qmp-14nm.h

@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_14NM_H_
+#define UFS_QCOM_PHY_QMP_14NM_H_
+
+#include "phy-qcom-ufs-i.h"
+
+/* QCOM UFS PHY control registers */
+#define COM_OFF(x)	(0x000 + x)
+#define PHY_OFF(x)	(0xC00 + x)
+#define TX_OFF(n, x)	(0x400 + (0x400 * n) + x)
+#define RX_OFF(n, x)	(0x600 + (0x400 * n) + x)
+
+/* UFS PHY QSERDES COM registers */
+#define QSERDES_COM_BG_TIMER			COM_OFF(0x0C)
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		COM_OFF(0x34)
+#define QSERDES_COM_SYS_CLK_CTRL		COM_OFF(0x3C)
+#define QSERDES_COM_LOCK_CMP1_MODE0		COM_OFF(0x4C)
+#define QSERDES_COM_LOCK_CMP2_MODE0		COM_OFF(0x50)
+#define QSERDES_COM_LOCK_CMP3_MODE0		COM_OFF(0x54)
+#define QSERDES_COM_LOCK_CMP1_MODE1		COM_OFF(0x58)
+#define QSERDES_COM_LOCK_CMP2_MODE1		COM_OFF(0x5C)
+#define QSERDES_COM_LOCK_CMP3_MODE1		COM_OFF(0x60)
+#define QSERDES_COM_CP_CTRL_MODE0		COM_OFF(0x78)
+#define QSERDES_COM_CP_CTRL_MODE1		COM_OFF(0x7C)
+#define QSERDES_COM_PLL_RCTRL_MODE0		COM_OFF(0x84)
+#define QSERDES_COM_PLL_RCTRL_MODE1		COM_OFF(0x88)
+#define QSERDES_COM_PLL_CCTRL_MODE0		COM_OFF(0x90)
+#define QSERDES_COM_PLL_CCTRL_MODE1		COM_OFF(0x94)
+#define QSERDES_COM_SYSCLK_EN_SEL		COM_OFF(0xAC)
+#define QSERDES_COM_RESETSM_CNTRL		COM_OFF(0xB4)
+#define QSERDES_COM_LOCK_CMP_EN			COM_OFF(0xC8)
+#define QSERDES_COM_LOCK_CMP_CFG		COM_OFF(0xCC)
+#define QSERDES_COM_DEC_START_MODE0		COM_OFF(0xD0)
+#define QSERDES_COM_DEC_START_MODE1		COM_OFF(0xD4)
+#define QSERDES_COM_DIV_FRAC_START1_MODE0	COM_OFF(0xDC)
+#define QSERDES_COM_DIV_FRAC_START2_MODE0	COM_OFF(0xE0)
+#define QSERDES_COM_DIV_FRAC_START3_MODE0	COM_OFF(0xE4)
+#define QSERDES_COM_DIV_FRAC_START1_MODE1	COM_OFF(0xE8)
+#define QSERDES_COM_DIV_FRAC_START2_MODE1	COM_OFF(0xEC)
+#define QSERDES_COM_DIV_FRAC_START3_MODE1	COM_OFF(0xF0)
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0	COM_OFF(0x108)
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0	COM_OFF(0x10C)
+#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1	COM_OFF(0x110)
+#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1	COM_OFF(0x114)
+#define QSERDES_COM_VCO_TUNE_CTRL		COM_OFF(0x124)
+#define QSERDES_COM_VCO_TUNE_MAP		COM_OFF(0x128)
+#define QSERDES_COM_VCO_TUNE1_MODE0		COM_OFF(0x12C)
+#define QSERDES_COM_VCO_TUNE2_MODE0		COM_OFF(0x130)
+#define QSERDES_COM_VCO_TUNE1_MODE1		COM_OFF(0x134)
+#define QSERDES_COM_VCO_TUNE2_MODE1		COM_OFF(0x138)
+#define QSERDES_COM_VCO_TUNE_TIMER1		COM_OFF(0x144)
+#define QSERDES_COM_VCO_TUNE_TIMER2		COM_OFF(0x148)
+#define QSERDES_COM_CLK_SELECT			COM_OFF(0x174)
+#define QSERDES_COM_HSCLK_SEL			COM_OFF(0x178)
+#define QSERDES_COM_CORECLK_DIV			COM_OFF(0x184)
+#define QSERDES_COM_CORE_CLK_EN			COM_OFF(0x18C)
+#define QSERDES_COM_CMN_CONFIG			COM_OFF(0x194)
+#define QSERDES_COM_SVS_MODE_CLK_SEL		COM_OFF(0x19C)
+#define QSERDES_COM_CORECLK_DIV_MODE1		COM_OFF(0x1BC)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START			PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL		PHY_OFF(0x04)
+#define UFS_PHY_PCS_READY_STATUS		PHY_OFF(0x168)
+
+/* UFS PHY TX registers */
+#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN	TX_OFF(0, 0x68)
+#define QSERDES_TX_LANE_MODE				TX_OFF(0, 0x94)
+
+/* UFS PHY RX registers */
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN	RX_OFF(0, 0x40)
+#define QSERDES_RX_RX_TERM_BW			RX_OFF(0, 0x90)
+#define QSERDES_RX_RX_EQ_GAIN1_LSB		RX_OFF(0, 0xC4)
+#define QSERDES_RX_RX_EQ_GAIN1_MSB		RX_OFF(0, 0xC8)
+#define QSERDES_RX_RX_EQ_GAIN2_LSB		RX_OFF(0, 0xCC)
+#define QSERDES_RX_RX_EQ_GAIN2_MSB		RX_OFF(0, 0xD0)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2	RX_OFF(0, 0xD8)
+#define QSERDES_RX_SIGDET_CNTRL			RX_OFF(0, 0x114)
+#define QSERDES_RX_SIGDET_LVL			RX_OFF(0, 0x118)
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL	RX_OFF(0, 0x11C)
+#define QSERDES_RX_RX_INTERFACE_MODE		RX_OFF(0, 0x12C)
+
+/*
+ * This structure represents the 14nm specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_14nm {
+	struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
+	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
+
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
+
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
+};
+
+#endif

drivers/phy/phy-qcom-ufs-qmp-20nm.c

@@ -0,0 +1,257 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-qmp-20nm.h"
+
+#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
+
+static
+int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+					bool is_rate_B)
+{
+	struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
+	int tbl_size_A, tbl_size_B;
+	u8 major = ufs_qcom_phy->host_ctrl_rev_major;
+	u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
+	u16 step = ufs_qcom_phy->host_ctrl_rev_step;
+	int err;
+
+	if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) {
+		tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0);
+		tbl_A = phy_cal_table_rate_A_1_2_0;
+	} else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) {
+		tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0);
+		tbl_A = phy_cal_table_rate_A_1_3_0;
+	} else {
+		dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n",
+			__func__);
+		err = -ENODEV;
+		goto out;
+	}
+
+	tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
+	tbl_B = phy_cal_table_rate_B;
+
+	err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
+						tbl_B, tbl_size_B, is_rate_B);
+
+	if (err)
+		dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n",
+			__func__, err);
+
+out:
+	return err;
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
+{
+	phy_common->quirks =
+		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+}
+
+static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy);
+	struct ufs_qcom_phy *phy_common = &phy->common_cfg;
+	int err = 0;
+
+	err = ufs_qcom_phy_init_clks(generic_phy, phy_common);
+	if (err) {
+		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common);
+	if (err) {
+		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
+
+out:
+	return err;
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
+{
+	bool hibern8_exit_after_pwr_collapse = phy->quirks &
+		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
+
+	if (val) {
+		writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+		/*
+		 * Before any transactions involving PHY, ensure PHY knows
+		 * that it's analog rail is powered ON.
+		 */
+		mb();
+
+		if (hibern8_exit_after_pwr_collapse) {
+			/*
+			 * Give atleast 1us delay after restoring PHY analog
+			 * power.
+			 */
+			usleep_range(1, 2);
+			writel_relaxed(0x0A, phy->mmio +
+				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+			writel_relaxed(0x08, phy->mmio +
+				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+			/*
+			 * Make sure workaround is deactivated before proceeding
+			 * with normal PHY operations.
+			 */
+			mb();
+		}
+	} else {
+		if (hibern8_exit_after_pwr_collapse) {
+			writel_relaxed(0x0A, phy->mmio +
+				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+			writel_relaxed(0x02, phy->mmio +
+				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
+			/*
+			 * Make sure that above workaround is activated before
+			 * PHY analog power collapse.
+			 */
+			mb();
+		}
+
+		writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
+		/*
+		 * ensure that PHY knows its PHY analog rail is going
+		 * to be powered down
+		 */
+		mb();
+	}
+}
+
+static
+void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
+{
+	writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
+			phy->mmio + UFS_PHY_TX_LANE_ENABLE);
+	mb();
+}
+
+static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy)
+{
+	u32 tmp;
+
+	tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
+	tmp &= ~MASK_SERDES_START;
+	tmp |= (1 << OFFSET_SERDES_START);
+	writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
+	mb();
+}
+
+static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
+{
+	int err = 0;
+	u32 val;
+
+	err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
+			val, (val & MASK_PCS_READY), 10, 1000000);
+	if (err)
+		dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
+			__func__, err);
+	return err;
+}
+
+static struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
+	.init		= ufs_qcom_phy_qmp_20nm_init,
+	.exit		= ufs_qcom_phy_exit,
+	.power_on	= ufs_qcom_phy_power_on,
+	.power_off	= ufs_qcom_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
+	.calibrate_phy		= ufs_qcom_phy_qmp_20nm_phy_calibrate,
+	.start_serdes		= ufs_qcom_phy_qmp_20nm_start_serdes,
+	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
+	.set_tx_lane_enable	= ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
+	.power_control		= ufs_qcom_phy_qmp_20nm_power_control,
+};
+
+static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+	struct ufs_qcom_phy_qmp_20nm *phy;
+	int err = 0;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		dev_err(dev, "%s: failed to allocate phy\n", __func__);
+		err = -ENOMEM;
+		goto out;
+	}
+
+	generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
+				&ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
+
+	if (!generic_phy) {
+		dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
+			__func__);
+		err = -EIO;
+		goto out;
+	}
+
+	phy_set_drvdata(generic_phy, phy);
+
+	strlcpy(phy->common_cfg.name, UFS_PHY_NAME,
+			sizeof(phy->common_cfg.name));
+
+out:
+	return err;
+}
+
+static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy = to_phy(dev);
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+	int err = 0;
+
+	err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy);
+	if (err)
+		dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n",
+			__func__, err);
+
+	return err;
+}
+
+static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
+	{.compatible = "qcom,ufs-phy-qmp-20nm"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
+
+static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
+	.probe = ufs_qcom_phy_qmp_20nm_probe,
+	.remove = ufs_qcom_phy_qmp_20nm_remove,
+	.driver = {
+		.of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
+		.name = "ufs_qcom_phy_qmp_20nm",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-qcom-ufs-qmp-20nm.h

@@ -0,0 +1,235 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_PHY_QMP_20NM_H_
+#define UFS_QCOM_PHY_QMP_20NM_H_
+
+#include "phy-qcom-ufs-i.h"
+
+/* QCOM UFS PHY control registers */
+
+#define COM_OFF(x)     (0x000 + x)
+#define PHY_OFF(x)     (0xC00 + x)
+#define TX_OFF(n, x)   (0x400 + (0x400 * n) + x)
+#define RX_OFF(n, x)   (0x600 + (0x400 * n) + x)
+
+/* UFS PHY PLL block registers */
+#define QSERDES_COM_SYS_CLK_CTRL		COM_OFF(0x0)
+#define QSERDES_COM_PLL_VCOTAIL_EN		COM_OFF(0x04)
+#define QSERDES_COM_PLL_CNTRL			COM_OFF(0x14)
+#define QSERDES_COM_PLL_IP_SETI			COM_OFF(0x24)
+#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL	COM_OFF(0x28)
+#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN		COM_OFF(0x30)
+#define QSERDES_COM_PLL_CP_SETI			COM_OFF(0x34)
+#define QSERDES_COM_PLL_IP_SETP			COM_OFF(0x38)
+#define QSERDES_COM_PLL_CP_SETP			COM_OFF(0x3C)
+#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND	COM_OFF(0x48)
+#define QSERDES_COM_RESETSM_CNTRL		COM_OFF(0x4C)
+#define QSERDES_COM_RESETSM_CNTRL2		COM_OFF(0x50)
+#define QSERDES_COM_PLLLOCK_CMP1		COM_OFF(0x90)
+#define QSERDES_COM_PLLLOCK_CMP2		COM_OFF(0x94)
+#define QSERDES_COM_PLLLOCK_CMP3		COM_OFF(0x98)
+#define QSERDES_COM_PLLLOCK_CMP_EN		COM_OFF(0x9C)
+#define QSERDES_COM_BGTC			COM_OFF(0xA0)
+#define QSERDES_COM_DEC_START1			COM_OFF(0xAC)
+#define QSERDES_COM_PLL_AMP_OS			COM_OFF(0xB0)
+#define QSERDES_COM_RES_CODE_UP_OFFSET		COM_OFF(0xD8)
+#define QSERDES_COM_RES_CODE_DN_OFFSET		COM_OFF(0xDC)
+#define QSERDES_COM_DIV_FRAC_START1		COM_OFF(0x100)
+#define QSERDES_COM_DIV_FRAC_START2		COM_OFF(0x104)
+#define QSERDES_COM_DIV_FRAC_START3		COM_OFF(0x108)
+#define QSERDES_COM_DEC_START2			COM_OFF(0x10C)
+#define QSERDES_COM_PLL_RXTXEPCLK_EN		COM_OFF(0x110)
+#define QSERDES_COM_PLL_CRCTRL			COM_OFF(0x114)
+#define QSERDES_COM_PLL_CLKEPDIV		COM_OFF(0x118)
+
+/* TX LANE n (0, 1) registers */
+#define QSERDES_TX_EMP_POST1_LVL(n)		TX_OFF(n, 0x08)
+#define QSERDES_TX_DRV_LVL(n)			TX_OFF(n, 0x0C)
+#define QSERDES_TX_LANE_MODE(n)			TX_OFF(n, 0x54)
+
+/* RX LANE n (0, 1) registers */
+#define QSERDES_RX_CDR_CONTROL1(n)		RX_OFF(n, 0x0)
+#define QSERDES_RX_CDR_CONTROL_HALF(n)		RX_OFF(n, 0x8)
+#define QSERDES_RX_RX_EQ_GAIN1_LSB(n)		RX_OFF(n, 0xA8)
+#define QSERDES_RX_RX_EQ_GAIN1_MSB(n)		RX_OFF(n, 0xAC)
+#define QSERDES_RX_RX_EQ_GAIN2_LSB(n)		RX_OFF(n, 0xB0)
+#define QSERDES_RX_RX_EQ_GAIN2_MSB(n)		RX_OFF(n, 0xB4)
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n)	RX_OFF(n, 0xBC)
+#define QSERDES_RX_CDR_CONTROL_QUARTER(n)	RX_OFF(n, 0xC)
+#define QSERDES_RX_SIGDET_CNTRL(n)		RX_OFF(n, 0x100)
+
+/* UFS PHY registers */
+#define UFS_PHY_PHY_START			PHY_OFF(0x00)
+#define UFS_PHY_POWER_DOWN_CONTROL		PHY_OFF(0x4)
+#define UFS_PHY_TX_LANE_ENABLE			PHY_OFF(0x44)
+#define UFS_PHY_PWM_G1_CLK_DIVIDER		PHY_OFF(0x08)
+#define UFS_PHY_PWM_G2_CLK_DIVIDER		PHY_OFF(0x0C)
+#define UFS_PHY_PWM_G3_CLK_DIVIDER		PHY_OFF(0x10)
+#define UFS_PHY_PWM_G4_CLK_DIVIDER		PHY_OFF(0x14)
+#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER	PHY_OFF(0x34)
+#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER	PHY_OFF(0x38)
+#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER	PHY_OFF(0x3C)
+#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER	PHY_OFF(0x40)
+#define UFS_PHY_OMC_STATUS_RDVAL		PHY_OFF(0x68)
+#define UFS_PHY_LINE_RESET_TIME			PHY_OFF(0x28)
+#define UFS_PHY_LINE_RESET_GRANULARITY		PHY_OFF(0x2C)
+#define UFS_PHY_TSYNC_RSYNC_CNTL		PHY_OFF(0x48)
+#define UFS_PHY_PLL_CNTL			PHY_OFF(0x50)
+#define UFS_PHY_TX_LARGE_AMP_DRV_LVL		PHY_OFF(0x54)
+#define UFS_PHY_TX_SMALL_AMP_DRV_LVL		PHY_OFF(0x5C)
+#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL	PHY_OFF(0x58)
+#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL	PHY_OFF(0x60)
+#define UFS_PHY_CFG_CHANGE_CNT_VAL		PHY_OFF(0x64)
+#define UFS_PHY_RX_SYNC_WAIT_TIME		PHY_OFF(0x6C)
+#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xB4)
+#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xE0)
+#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xB8)
+#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY	PHY_OFF(0xE4)
+#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY	PHY_OFF(0xBC)
+#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY	PHY_OFF(0xE8)
+#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY	PHY_OFF(0xFC)
+#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY		PHY_OFF(0x100)
+#define UFS_PHY_RX_SIGDET_CTRL3				PHY_OFF(0x14c)
+#define UFS_PHY_RMMI_ATTR_CTRL			PHY_OFF(0x160)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L1	(1 << 7)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L1	(1 << 6)
+#define UFS_PHY_RMMI_CFGWR_L1		(1 << 5)
+#define UFS_PHY_RMMI_CFGRD_L1		(1 << 4)
+#define UFS_PHY_RMMI_RX_CFGUPDT_L0	(1 << 3)
+#define UFS_PHY_RMMI_TX_CFGUPDT_L0	(1 << 2)
+#define UFS_PHY_RMMI_CFGWR_L0		(1 << 1)
+#define UFS_PHY_RMMI_CFGRD_L0		(1 << 0)
+#define UFS_PHY_RMMI_ATTRID			PHY_OFF(0x164)
+#define UFS_PHY_RMMI_ATTRWRVAL			PHY_OFF(0x168)
+#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS	PHY_OFF(0x16C)
+#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS	PHY_OFF(0x170)
+#define UFS_PHY_PCS_READY_STATUS		PHY_OFF(0x174)
+
+#define UFS_PHY_TX_LANE_ENABLE_MASK		0x3
+
+/*
+ * This structure represents the 20nm specific phy.
+ * common_cfg MUST remain the first field in this structure
+ * in case extra fields are added. This way, when calling
+ * get_ufs_qcom_phy() of generic phy, we can extract the
+ * common phy structure (struct ufs_qcom_phy) out of it
+ * regardless of the relevant specific phy.
+ */
+struct ufs_qcom_phy_qmp_20nm {
+	struct ufs_qcom_phy common_cfg;
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
+	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
+	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
+	UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
+};
+
+static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
+	UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
+};
+
+#endif

drivers/phy/phy-qcom-ufs.c

@@ -0,0 +1,745 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "phy-qcom-ufs-i.h"
+
+#define MAX_PROP_NAME              32
+#define VDDA_PHY_MIN_UV            1000000
+#define VDDA_PHY_MAX_UV            1000000
+#define VDDA_PLL_MIN_UV            1800000
+#define VDDA_PLL_MAX_UV            1800000
+#define VDDP_REF_CLK_MIN_UV        1200000
+#define VDDP_REF_CLK_MAX_UV        1200000
+
+static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *,
+				    const char *, bool);
+static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *,
+				  const char *);
+static int ufs_qcom_phy_base_init(struct platform_device *pdev,
+				  struct ufs_qcom_phy *phy_common);
+
+int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
+			   struct ufs_qcom_phy_calibration *tbl_A,
+			   int tbl_size_A,
+			   struct ufs_qcom_phy_calibration *tbl_B,
+			   int tbl_size_B, bool is_rate_B)
+{
+	int i;
+	int ret = 0;
+
+	if (!tbl_A) {
+		dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__);
+		ret = EINVAL;
+		goto out;
+	}
+
+	for (i = 0; i < tbl_size_A; i++)
+		writel_relaxed(tbl_A[i].cfg_value,
+			       ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
+
+	/*
+	 * In case we would like to work in rate B, we need
+	 * to override a registers that were configured in rate A table
+	 * with registers of rate B table.
+	 * table.
+	 */
+	if (is_rate_B) {
+		if (!tbl_B) {
+			dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL",
+				__func__);
+			ret = EINVAL;
+			goto out;
+		}
+
+		for (i = 0; i < tbl_size_B; i++)
+			writel_relaxed(tbl_B[i].cfg_value,
+				ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
+	}
+
+	/* flush buffered writes */
+	mb();
+
+out:
+	return ret;
+}
+
+struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
+				struct ufs_qcom_phy *common_cfg,
+				struct phy_ops *ufs_qcom_phy_gen_ops,
+				struct ufs_qcom_phy_specific_ops *phy_spec_ops)
+{
+	int err;
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy = NULL;
+	struct phy_provider *phy_provider;
+
+	err = ufs_qcom_phy_base_init(pdev, common_cfg);
+	if (err) {
+		dev_err(dev, "%s: phy base init failed %d\n", __func__, err);
+		goto out;
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		err = PTR_ERR(phy_provider);
+		dev_err(dev, "%s: failed to register phy %d\n", __func__, err);
+		goto out;
+	}
+
+	generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops);
+	if (IS_ERR(generic_phy)) {
+		err =  PTR_ERR(generic_phy);
+		dev_err(dev, "%s: failed to create phy %d\n", __func__, err);
+		goto out;
+	}
+
+	common_cfg->phy_spec_ops = phy_spec_ops;
+	common_cfg->dev = dev;
+
+out:
+	return generic_phy;
+}
+
+/*
+ * This assumes the embedded phy structure inside generic_phy is of type
+ * struct ufs_qcom_phy. In order to function properly it's crucial
+ * to keep the embedded struct "struct ufs_qcom_phy common_cfg"
+ * as the first inside generic_phy.
+ */
+struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
+{
+	return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
+}
+
+static
+int ufs_qcom_phy_base_init(struct platform_device *pdev,
+			   struct ufs_qcom_phy *phy_common)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int err = 0;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem");
+	if (!res) {
+		dev_err(dev, "%s: phy_mem resource not found\n", __func__);
+		err = -ENOMEM;
+		goto out;
+	}
+
+	phy_common->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR((void const *)phy_common->mmio)) {
+		err = PTR_ERR((void const *)phy_common->mmio);
+		phy_common->mmio = NULL;
+		dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	/* "dev_ref_clk_ctrl_mem" is optional resource */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "dev_ref_clk_ctrl_mem");
+	if (!res) {
+		dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n",
+			__func__);
+		goto out;
+	}
+
+	phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) {
+		err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio);
+		phy_common->dev_ref_clk_ctrl_mmio = NULL;
+		dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n",
+			__func__, err);
+	}
+
+out:
+	return err;
+}
+
+static int __ufs_qcom_phy_clk_get(struct phy *phy,
+			 const char *name, struct clk **clk_out, bool err_print)
+{
+	struct clk *clk;
+	int err = 0;
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+	struct device *dev = ufs_qcom_phy->dev;
+
+	clk = devm_clk_get(dev, name);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		if (err_print)
+			dev_err(dev, "failed to get %s err %d", name, err);
+	} else {
+		*clk_out = clk;
+	}
+
+	return err;
+}
+
+static
+int ufs_qcom_phy_clk_get(struct phy *phy,
+			 const char *name, struct clk **clk_out)
+{
+	return __ufs_qcom_phy_clk_get(phy, name, clk_out, true);
+}
+
+int
+ufs_qcom_phy_init_clks(struct phy *generic_phy,
+		       struct ufs_qcom_phy *phy_common)
+{
+	int err;
+
+	err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk",
+				   &phy_common->tx_iface_clk);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk",
+				   &phy_common->rx_iface_clk);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src",
+				   &phy_common->ref_clk_src);
+	if (err)
+		goto out;
+
+	/*
+	 * "ref_clk_parent" is optional hence don't abort init if it's not
+	 * found.
+	 */
+	__ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent",
+				   &phy_common->ref_clk_parent, false);
+
+	err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk",
+				   &phy_common->ref_clk);
+
+out:
+	return err;
+}
+
+int
+ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
+			      struct ufs_qcom_phy *phy_common)
+{
+	int err;
+
+	err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll,
+		"vdda-pll");
+	if (err)
+		goto out;
+
+	err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy,
+		"vdda-phy");
+
+	if (err)
+		goto out;
+
+	/* vddp-ref-clk-* properties are optional */
+	__ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk,
+				 "vddp-ref-clk", true);
+out:
+	return err;
+}
+
+static int __ufs_qcom_phy_init_vreg(struct phy *phy,
+		struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional)
+{
+	int err = 0;
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+	struct device *dev = ufs_qcom_phy->dev;
+
+	char prop_name[MAX_PROP_NAME];
+
+	vreg->name = kstrdup(name, GFP_KERNEL);
+	if (!vreg->name) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	vreg->reg = devm_regulator_get(dev, name);
+	if (IS_ERR(vreg->reg)) {
+		err = PTR_ERR(vreg->reg);
+		vreg->reg = NULL;
+		if (!optional)
+			dev_err(dev, "failed to get %s, %d\n", name, err);
+		goto out;
+	}
+
+	if (dev->of_node) {
+		snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name);
+		err = of_property_read_u32(dev->of_node,
+					prop_name, &vreg->max_uA);
+		if (err && err != -EINVAL) {
+			dev_err(dev, "%s: failed to read %s\n",
+					__func__, prop_name);
+			goto out;
+		} else if (err == -EINVAL || !vreg->max_uA) {
+			if (regulator_count_voltages(vreg->reg) > 0) {
+				dev_err(dev, "%s: %s is mandatory\n",
+						__func__, prop_name);
+				goto out;
+			}
+			err = 0;
+		}
+		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
+		if (of_get_property(dev->of_node, prop_name, NULL))
+			vreg->is_always_on = true;
+		else
+			vreg->is_always_on = false;
+	}
+
+	if (!strcmp(name, "vdda-pll")) {
+		vreg->max_uV = VDDA_PLL_MAX_UV;
+		vreg->min_uV = VDDA_PLL_MIN_UV;
+	} else if (!strcmp(name, "vdda-phy")) {
+		vreg->max_uV = VDDA_PHY_MAX_UV;
+		vreg->min_uV = VDDA_PHY_MIN_UV;
+	} else if (!strcmp(name, "vddp-ref-clk")) {
+		vreg->max_uV = VDDP_REF_CLK_MAX_UV;
+		vreg->min_uV = VDDP_REF_CLK_MIN_UV;
+	}
+
+out:
+	if (err)
+		kfree(vreg->name);
+	return err;
+}
+
+static int ufs_qcom_phy_init_vreg(struct phy *phy,
+			struct ufs_qcom_phy_vreg *vreg, const char *name)
+{
+	return __ufs_qcom_phy_init_vreg(phy, vreg, name, false);
+}
+
+static
+int ufs_qcom_phy_cfg_vreg(struct phy *phy,
+			  struct ufs_qcom_phy_vreg *vreg, bool on)
+{
+	int ret = 0;
+	struct regulator *reg = vreg->reg;
+	const char *name = vreg->name;
+	int min_uV;
+	int uA_load;
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+	struct device *dev = ufs_qcom_phy->dev;
+
+	BUG_ON(!vreg);
+
+	if (regulator_count_voltages(reg) > 0) {
+		min_uV = on ? vreg->min_uV : 0;
+		ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
+		if (ret) {
+			dev_err(dev, "%s: %s set voltage failed, err=%d\n",
+					__func__, name, ret);
+			goto out;
+		}
+		uA_load = on ? vreg->max_uA : 0;
+		ret = regulator_set_optimum_mode(reg, uA_load);
+		if (ret >= 0) {
+			/*
+			 * regulator_set_optimum_mode() returns new regulator
+			 * mode upon success.
+			 */
+			ret = 0;
+		} else {
+			dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
+					__func__, name, uA_load, ret);
+			goto out;
+		}
+	}
+out:
+	return ret;
+}
+
+static
+int ufs_qcom_phy_enable_vreg(struct phy *phy,
+			     struct ufs_qcom_phy_vreg *vreg)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+	struct device *dev = ufs_qcom_phy->dev;
+	int ret = 0;
+
+	if (!vreg || vreg->enabled)
+		goto out;
+
+	ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true);
+	if (ret) {
+		dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	ret = regulator_enable(vreg->reg);
+	if (ret) {
+		dev_err(dev, "%s: enable failed, err=%d\n",
+				__func__, ret);
+		goto out;
+	}
+
+	vreg->enabled = true;
+out:
+	return ret;
+}
+
+int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
+{
+	int ret = 0;
+	struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+	if (phy->is_ref_clk_enabled)
+		goto out;
+
+	/*
+	 * reference clock is propagated in a daisy-chained manner from
+	 * source to phy, so ungate them at each stage.
+	 */
+	ret = clk_prepare_enable(phy->ref_clk_src);
+	if (ret) {
+		dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+
+	/*
+	 * "ref_clk_parent" is optional clock hence make sure that clk reference
+	 * is available before trying to enable the clock.
+	 */
+	if (phy->ref_clk_parent) {
+		ret = clk_prepare_enable(phy->ref_clk_parent);
+		if (ret) {
+			dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n",
+					__func__, ret);
+			goto out_disable_src;
+		}
+	}
+
+	ret = clk_prepare_enable(phy->ref_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
+				__func__, ret);
+		goto out_disable_parent;
+	}
+
+	phy->is_ref_clk_enabled = true;
+	goto out;
+
+out_disable_parent:
+	if (phy->ref_clk_parent)
+		clk_disable_unprepare(phy->ref_clk_parent);
+out_disable_src:
+	clk_disable_unprepare(phy->ref_clk_src);
+out:
+	return ret;
+}
+
+static
+int ufs_qcom_phy_disable_vreg(struct phy *phy,
+			      struct ufs_qcom_phy_vreg *vreg)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy);
+	struct device *dev = ufs_qcom_phy->dev;
+	int ret = 0;
+
+	if (!vreg || !vreg->enabled || vreg->is_always_on)
+		goto out;
+
+	ret = regulator_disable(vreg->reg);
+
+	if (!ret) {
+		/* ignore errors on applying disable config */
+		ufs_qcom_phy_cfg_vreg(phy, vreg, false);
+		vreg->enabled = false;
+	} else {
+		dev_err(dev, "%s: %s disable failed, err=%d\n",
+				__func__, vreg->name, ret);
+	}
+out:
+	return ret;
+}
+
+void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+	if (phy->is_ref_clk_enabled) {
+		clk_disable_unprepare(phy->ref_clk);
+		/*
+		 * "ref_clk_parent" is optional clock hence make sure that clk
+		 * reference is available before trying to disable the clock.
+		 */
+		if (phy->ref_clk_parent)
+			clk_disable_unprepare(phy->ref_clk_parent);
+		clk_disable_unprepare(phy->ref_clk_src);
+		phy->is_ref_clk_enabled = false;
+	}
+}
+
+#define UFS_REF_CLK_EN	(1 << 5)
+
+static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable)
+{
+	struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+	if (phy->dev_ref_clk_ctrl_mmio &&
+	    (enable ^ phy->is_dev_ref_clk_enabled)) {
+		u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio);
+
+		if (enable)
+			temp |= UFS_REF_CLK_EN;
+		else
+			temp &= ~UFS_REF_CLK_EN;
+
+		/*
+		 * If we are here to disable this clock immediately after
+		 * entering into hibern8, we need to make sure that device
+		 * ref_clk is active atleast 1us after the hibern8 enter.
+		 */
+		if (!enable)
+			udelay(1);
+
+		writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio);
+		/* ensure that ref_clk is enabled/disabled before we return */
+		wmb();
+		/*
+		 * If we call hibern8 exit after this, we need to make sure that
+		 * device ref_clk is stable for atleast 1us before the hibern8
+		 * exit command.
+		 */
+		if (enable)
+			udelay(1);
+
+		phy->is_dev_ref_clk_enabled = enable;
+	}
+}
+
+void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
+{
+	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
+}
+
+void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
+{
+	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
+}
+
+/* Turn ON M-PHY RMMI interface clocks */
+int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+	int ret = 0;
+
+	if (phy->is_iface_clk_enabled)
+		goto out;
+
+	ret = clk_prepare_enable(phy->tx_iface_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(phy->rx_iface_clk);
+	if (ret) {
+		clk_disable_unprepare(phy->tx_iface_clk);
+		dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n",
+				__func__, ret);
+		goto out;
+	}
+	phy->is_iface_clk_enabled = true;
+
+out:
+	return ret;
+}
+
+/* Turn OFF M-PHY RMMI interface clocks */
+void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy);
+
+	if (phy->is_iface_clk_enabled) {
+		clk_disable_unprepare(phy->tx_iface_clk);
+		clk_disable_unprepare(phy->rx_iface_clk);
+		phy->is_iface_clk_enabled = false;
+	}
+}
+
+int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+	int ret = 0;
+
+	if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
+		dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n",
+			__func__);
+		ret = -ENOTSUPP;
+	} else {
+		ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy);
+	}
+
+	return ret;
+}
+
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+	int ret = 0;
+
+	if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) {
+		dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n",
+			__func__);
+		ret = -ENOTSUPP;
+	} else {
+		ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy,
+							       tx_lanes);
+	}
+
+	return ret;
+}
+
+void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
+					  u8 major, u16 minor, u16 step)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+	ufs_qcom_phy->host_ctrl_rev_major = major;
+	ufs_qcom_phy->host_ctrl_rev_minor = minor;
+	ufs_qcom_phy->host_ctrl_rev_step = step;
+}
+
+int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+	int ret = 0;
+
+	if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
+		dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n",
+			__func__);
+		ret = -ENOTSUPP;
+	} else {
+		ret = ufs_qcom_phy->phy_spec_ops->
+				calibrate_phy(ufs_qcom_phy, is_rate_B);
+		if (ret)
+			dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
+				__func__, ret);
+	}
+
+	return ret;
+}
+
+int ufs_qcom_phy_remove(struct phy *generic_phy,
+			struct ufs_qcom_phy *ufs_qcom_phy)
+{
+	phy_power_off(generic_phy);
+
+	kfree(ufs_qcom_phy->vdda_pll.name);
+	kfree(ufs_qcom_phy->vdda_phy.name);
+
+	return 0;
+}
+
+int ufs_qcom_phy_exit(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+	if (ufs_qcom_phy->is_powered_on)
+		phy_power_off(generic_phy);
+
+	return 0;
+}
+
+int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
+
+	if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
+		dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
+			__func__);
+		return -ENOTSUPP;
+	}
+
+	return ufs_qcom_phy->phy_spec_ops->
+			is_physical_coding_sublayer_ready(ufs_qcom_phy);
+}
+
+int ufs_qcom_phy_power_on(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+	struct device *dev = phy_common->dev;
+	int err;
+
+	err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy);
+	if (err) {
+		dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
+			__func__, err);
+		goto out;
+	}
+
+	phy_common->phy_spec_ops->power_control(phy_common, true);
+
+	/* vdda_pll also enables ref clock LDOs so enable it first */
+	err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll);
+	if (err) {
+		dev_err(dev, "%s enable vdda_pll failed, err=%d\n",
+			__func__, err);
+		goto out_disable_phy;
+	}
+
+	err = ufs_qcom_phy_enable_ref_clk(generic_phy);
+	if (err) {
+		dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
+			__func__, err);
+		goto out_disable_pll;
+	}
+
+	/* enable device PHY ref_clk pad rail */
+	if (phy_common->vddp_ref_clk.reg) {
+		err = ufs_qcom_phy_enable_vreg(generic_phy,
+					       &phy_common->vddp_ref_clk);
+		if (err) {
+			dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n",
+				__func__, err);
+			goto out_disable_ref_clk;
+		}
+	}
+
+	phy_common->is_powered_on = true;
+	goto out;
+
+out_disable_ref_clk:
+	ufs_qcom_phy_disable_ref_clk(generic_phy);
+out_disable_pll:
+	ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
+out_disable_phy:
+	ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
+out:
+	return err;
+}
+
+int ufs_qcom_phy_power_off(struct phy *generic_phy)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->phy_spec_ops->power_control(phy_common, false);
+
+	if (phy_common->vddp_ref_clk.reg)
+		ufs_qcom_phy_disable_vreg(generic_phy,
+					  &phy_common->vddp_ref_clk);
+	ufs_qcom_phy_disable_ref_clk(generic_phy);
+
+	ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll);
+	ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy);
+	phy_common->is_powered_on = false;
+
+	return 0;
+}

drivers/scsi/3w-9xxx.c

@@ -608,7 +608,8 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
 	}
 
 	/* Load rest of compatibility struct */
-	strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
+	strlcpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION,
+		sizeof(tw_dev->tw_compat_info.driver_version));
 	tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
 	tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
 	tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;

drivers/scsi/BusLogic.c

@@ -3485,7 +3485,7 @@ static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost)
 	seq_printf(m, "\n\
 Current Driver Queue Depth:	%d\n\
 Currently Allocated CCBs:	%d\n", adapter->drvr_qdepth, adapter->alloc_ccbs);
-	seq_printf(m, "\n\n\
+	seq_puts(m, "\n\n\
 			   DATA TRANSFER STATISTICS\n\
 \n\
 Target	Tagged Queuing	Queue Depth  Active  Attempted	Completed\n\
@@ -3500,7 +3500,7 @@ Target	Tagged Queuing	Queue Depth  Active  Attempted	Completed\n\
 		seq_printf(m,
 				  "	    %3d       %3u    %9u	%9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete);
 	}
-	seq_printf(m, "\n\
+	seq_puts(m, "\n\
 Target  Read Commands  Write Commands   Total Bytes Read    Total Bytes Written\n\
 ======  =============  ==============  ===================  ===================\n");
 	for (tgt = 0; tgt < adapter->maxdev; tgt++) {
@@ -3517,7 +3517,7 @@ Target  Read Commands  Write Commands   Total Bytes Read    Total Bytes Written\
 		else
 			seq_printf(m, "	     %9u\n", tgt_stats[tgt].byteswritten.units);
 	}
-	seq_printf(m, "\n\
+	seq_puts(m, "\n\
 Target  Command    0-1KB      1-2KB      2-4KB      4-8KB     8-16KB\n\
 ======  =======  =========  =========  =========  =========  =========\n");
 	for (tgt = 0; tgt < adapter->maxdev; tgt++) {
@@ -3533,7 +3533,7 @@ Target  Command    0-1KB      1-2KB      2-4KB      4-8KB     8-16KB\n\
 			    tgt_stats[tgt].write_sz_buckets[0],
 			    tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]);
 	}
-	seq_printf(m, "\n\
+	seq_puts(m, "\n\
 Target  Command   16-32KB    32-64KB   64-128KB   128-256KB   256KB+\n\
 ======  =======  =========  =========  =========  =========  =========\n");
 	for (tgt = 0; tgt < adapter->maxdev; tgt++) {
@@ -3549,7 +3549,7 @@ Target  Command   16-32KB    32-64KB   64-128KB   128-256KB   256KB+\n\
 			    tgt_stats[tgt].write_sz_buckets[5],
 			    tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]);
 	}
-	seq_printf(m, "\n\n\
+	seq_puts(m, "\n\n\
 			   ERROR RECOVERY STATISTICS\n\
 \n\
 	  Command Aborts      Bus Device Resets	  Host Adapter Resets\n\

drivers/scsi/Kconfig

@@ -201,12 +201,12 @@ config SCSI_ENCLOSURE
 	  certain enclosure conditions to be reported and is not required.
 
 config SCSI_CONSTANTS
-	bool "Verbose SCSI error reporting (kernel size +=12K)"
+	bool "Verbose SCSI error reporting (kernel size +=75K)"
 	depends on SCSI
 	help
 	  The error messages regarding your SCSI hardware will be easier to
 	  understand if you say Y here; it will enlarge your kernel by about
-	  12 KB. If in doubt, say Y.
+	  75 KB. If in doubt, say Y.
 
 config SCSI_LOGGING
 	bool "SCSI logging facility"

drivers/scsi/Makefile

@@ -159,15 +159,15 @@ obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
 
 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o
-
-scsi_mod-y			+= scsi.o hosts.o scsi_ioctl.o constants.o \
+scsi_mod-y			+= scsi.o hosts.o scsi_ioctl.o \
 				   scsicam.o scsi_error.o scsi_lib.o
+scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o
 scsi_mod-$(CONFIG_SCSI_DMA)	+= scsi_lib_dma.o
 scsi_mod-y			+= scsi_scan.o scsi_sysfs.o scsi_devinfo.o
 scsi_mod-$(CONFIG_SCSI_NETLINK)	+= scsi_netlink.o
 scsi_mod-$(CONFIG_SYSCTL)	+= scsi_sysctl.o
 scsi_mod-$(CONFIG_SCSI_PROC_FS)	+= scsi_proc.o
-scsi_mod-y			+= scsi_trace.o
+scsi_mod-y			+= scsi_trace.o scsi_logging.o
 scsi_mod-$(CONFIG_PM)		+= scsi_pm.o
 
 hv_storvsc-y			:= storvsc_drv.o

drivers/scsi/NCR5380.c

@@ -716,8 +716,6 @@ static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
 }
 #endif
 
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ## args)
 static
 void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
 static
@@ -734,19 +732,19 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
 	hostdata = (struct NCR5380_hostdata *) instance->hostdata;
 
 #ifdef PSEUDO_DMA
-	SPRINTF("Highwater I/O busy spin counts: write %d, read %d\n",
+	seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
 	        hostdata->spin_max_w, hostdata->spin_max_r);
 #endif
 	spin_lock_irq(instance->host_lock);
 	if (!hostdata->connected)
-		SPRINTF("scsi%d: no currently connected command\n", instance->host_no);
+		seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no);
 	else
 		lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
-	SPRINTF("scsi%d: issue_queue\n", instance->host_no);
+	seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
 	for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
 		lprint_Scsi_Cmnd(ptr, m);
 
-	SPRINTF("scsi%d: disconnected_queue\n", instance->host_no);
+	seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
 	for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
 		lprint_Scsi_Cmnd(ptr, m);
 	spin_unlock_irq(instance->host_lock);
@@ -755,8 +753,8 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
 
 static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
 {
-	SPRINTF("scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
-	SPRINTF("        command = ");
+	seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
+	seq_puts(m, "        command = ");
 	lprint_command(cmd->cmnd, m);
 }
 
@@ -765,13 +763,13 @@ static void lprint_command(unsigned char *command, struct seq_file *m)
 	int i, s;
 	lprint_opcode(command[0], m);
 	for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
-		SPRINTF("%02x ", command[i]);
-	SPRINTF("\n");
+		seq_printf(m, "%02x ", command[i]);
+	seq_putc(m, '\n');
 }
 
 static void lprint_opcode(int opcode, struct seq_file *m)
 {
-	SPRINTF("%2d (0x%02x)", opcode, opcode);
+	seq_printf(m, "%2d (0x%02x)", opcode, opcode);
 }
 
 

drivers/scsi/advansys.c

@@ -2880,7 +2880,7 @@ static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost)
 		chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id;
 	}
 
-	seq_printf(m, "Target IDs Detected:");
+	seq_puts(m, "Target IDs Detected:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i))
 			seq_printf(m, " %X,", i);
@@ -2896,18 +2896,16 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
 	struct asc_board *boardp = shost_priv(shost);
 	ushort major, minor, letter;
 
-	seq_printf(m, "\nROM BIOS Version: ");
+	seq_puts(m, "\nROM BIOS Version: ");
 
 	/*
 	 * If the BIOS saved a valid signature, then fill in
 	 * the BIOS code segment base address.
 	 */
 	if (boardp->bios_signature != 0x55AA) {
-		seq_printf(m, "Disabled or Pre-3.1\n");
-		seq_printf(m,
-			  "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n");
-		seq_printf(m,
-			  "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n");
+		seq_puts(m, "Disabled or Pre-3.1\n"
+			"BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n"
+			"can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n");
 	} else {
 		major = (boardp->bios_version >> 12) & 0xF;
 		minor = (boardp->bios_version >> 8) & 0xF;
@@ -2923,10 +2921,8 @@ static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost)
 		 */
 		if (major < 3 || (major <= 3 && minor < 1) ||
 		    (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) {
-			seq_printf(m,
-				   "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n");
-			seq_printf(m,
-				   "ftp://ftp.connectcom.net/pub\n");
+			seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n"
+				"ftp://ftp.connectcom.net/pub\n");
 		}
 	}
 }
@@ -3056,11 +3052,10 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	    == ASC_TRUE)
 		seq_printf(m, " Serial Number: %s\n", serialstr);
 	else if (ep->adapter_info[5] == 0xBB)
-		seq_printf(m,
-			   " Default Settings Used for EEPROM-less Adapter.\n");
+		seq_puts(m,
+			 " Default Settings Used for EEPROM-less Adapter.\n");
 	else
-		seq_printf(m,
-			   " Serial Number Signature Not Present.\n");
+		seq_puts(m, " Serial Number Signature Not Present.\n");
 
 	seq_printf(m,
 		   " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n",
@@ -3070,34 +3065,30 @@ static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	seq_printf(m,
 		   " cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam);
 
-	seq_printf(m, " Target ID:           ");
+	seq_puts(m, " Target ID:           ");
 	for (i = 0; i <= ASC_MAX_TID; i++)
 		seq_printf(m, " %d", i);
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Disconnects:         ");
+	seq_puts(m, "\n Disconnects:         ");
 	for (i = 0; i <= ASC_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Command Queuing:     ");
+	seq_puts(m, "\n Command Queuing:     ");
 	for (i = 0; i <= ASC_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Start Motor:         ");
+	seq_puts(m, "\n Start Motor:         ");
 	for (i = 0; i <= ASC_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Synchronous Transfer:");
+	seq_puts(m, "\n Synchronous Transfer:");
 	for (i = 0; i <= ASC_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 #ifdef CONFIG_ISA
 	if (asc_dvc_varp->bus_type & ASC_IS_ISA) {
@@ -3151,7 +3142,7 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE)
 		seq_printf(m, " Serial Number: %s\n", serialstr);
 	else
-		seq_printf(m, " Serial Number Signature Not Present.\n");
+		seq_puts(m, " Serial Number Signature Not Present.\n");
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550)
 		seq_printf(m,
@@ -3209,10 +3200,10 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 			   ep_38C1600->termination_lvd, termstr,
 			   ep_38C1600->bios_ctrl);
 
-	seq_printf(m, " Target ID:           ");
+	seq_puts(m, " Target ID:           ");
 	for (i = 0; i <= ADV_MAX_TID; i++)
 		seq_printf(m, " %X", i);
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
 		word = ep_3550->disc_enable;
@@ -3221,11 +3212,11 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	} else {
 		word = ep_38C1600->disc_enable;
 	}
-	seq_printf(m, " Disconnects:         ");
+	seq_puts(m, " Disconnects:         ");
 	for (i = 0; i <= ADV_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
 		word = ep_3550->tagqng_able;
@@ -3234,11 +3225,11 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	} else {
 		word = ep_38C1600->tagqng_able;
 	}
-	seq_printf(m, " Command Queuing:     ");
+	seq_puts(m, " Command Queuing:     ");
 	for (i = 0; i <= ADV_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
 		word = ep_3550->start_motor;
@@ -3247,28 +3238,28 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	} else {
 		word = ep_38C1600->start_motor;
 	}
-	seq_printf(m, " Start Motor:         ");
+	seq_puts(m, " Start Motor:         ");
 	for (i = 0; i <= ADV_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
-		seq_printf(m, " Synchronous Transfer:");
+		seq_puts(m, " Synchronous Transfer:");
 		for (i = 0; i <= ADV_MAX_TID; i++)
 			seq_printf(m, " %c",
 				   (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ?
 				   'Y' : 'N');
-		seq_printf(m, "\n");
+		seq_putc(m, '\n');
 	}
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
-		seq_printf(m, " Ultra Transfer:      ");
+		seq_puts(m, " Ultra Transfer:      ");
 		for (i = 0; i <= ADV_MAX_TID; i++)
 			seq_printf(m, " %c",
 				   (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i))
 				   ? 'Y' : 'N');
-		seq_printf(m, "\n");
+		seq_putc(m, '\n');
 	}
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) {
@@ -3278,16 +3269,15 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 	} else {
 		word = ep_38C1600->wdtr_able;
 	}
-	seq_printf(m, " Wide Transfer:       ");
+	seq_puts(m, " Wide Transfer:       ");
 	for (i = 0; i <= ADV_MAX_TID; i++)
 		seq_printf(m, " %c",
 			   (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 ||
 	    adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) {
-		seq_printf(m,
-			   " Synchronous Transfer Speed (Mhz):\n  ");
+		seq_puts(m, " Synchronous Transfer Speed (Mhz):\n  ");
 		for (i = 0; i <= ADV_MAX_TID; i++) {
 			char *speed_str;
 
@@ -3325,10 +3315,10 @@ static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost
 			}
 			seq_printf(m, "%X:%s ", i, speed_str);
 			if (i == 7)
-				seq_printf(m, "\n  ");
+				seq_puts(m, "\n  ");
 			sdtr_speed >>= 4;
 		}
-		seq_printf(m, "\n");
+		seq_putc(m, '\n');
 	}
 }
 
@@ -3403,7 +3393,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 	seq_printf(m,
 		   " Total Command Pending: %d\n", v->cur_total_qng);
 
-	seq_printf(m, " Command Queuing:");
+	seq_puts(m, " Command Queuing:");
 	for (i = 0; i <= ASC_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3413,10 +3403,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 			   i,
 			   (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
 	}
-	seq_printf(m, "\n");
 
 	/* Current number of commands waiting for a device. */
-	seq_printf(m, " Command Queue Pending:");
+	seq_puts(m, "\n Command Queue Pending:");
 	for (i = 0; i <= ASC_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3424,10 +3413,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		}
 		seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]);
 	}
-	seq_printf(m, "\n");
 
 	/* Current limit on number of commands that can be sent to a device. */
-	seq_printf(m, " Command Queue Limit:");
+	seq_puts(m, "\n Command Queue Limit:");
 	for (i = 0; i <= ASC_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3435,10 +3423,9 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		}
 		seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]);
 	}
-	seq_printf(m, "\n");
 
 	/* Indicate whether the device has returned queue full status. */
-	seq_printf(m, " Command Queue Full:");
+	seq_puts(m, "\n Command Queue Full:");
 	for (i = 0; i <= ASC_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3450,9 +3437,8 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		else
 			seq_printf(m, " %X:N", i);
 	}
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Synchronous Transfer:");
+	seq_puts(m, "\n Synchronous Transfer:");
 	for (i = 0; i <= ASC_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3462,7 +3448,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 			   i,
 			   (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	for (i = 0; i <= ASC_MAX_TID; i++) {
 		uchar syn_period_ix;
@@ -3476,7 +3462,7 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		seq_printf(m, "  %X:", i);
 
 		if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) {
-			seq_printf(m, " Asynchronous");
+			seq_puts(m, " Asynchronous");
 		} else {
 			syn_period_ix =
 			    (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index -
@@ -3494,16 +3480,15 @@ static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		}
 
 		if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
-			seq_printf(m, "*\n");
+			seq_puts(m, "*\n");
 			renegotiate = 1;
 		} else {
-			seq_printf(m, "\n");
+			seq_putc(m, '\n');
 		}
 	}
 
 	if (renegotiate) {
-		seq_printf(m,
-			   " * = Re-negotiation pending before next command.\n");
+		seq_puts(m, " * = Re-negotiation pending before next command.\n");
 	}
 }
 
@@ -3548,7 +3533,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		   c->mcode_date, c->mcode_version);
 
 	AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able);
-	seq_printf(m, " Queuing Enabled:");
+	seq_puts(m, " Queuing Enabled:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3559,9 +3544,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 			   i,
 			   (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
 	}
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Queue Limit:");
+	seq_puts(m, "\n Queue Limit:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3573,9 +3557,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 
 		seq_printf(m, " %X:%d", i, lrambyte);
 	}
-	seq_printf(m, "\n");
 
-	seq_printf(m, " Command Pending:");
+	seq_puts(m, "\n Command Pending:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3587,10 +3570,10 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 
 		seq_printf(m, " %X:%d", i, lrambyte);
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able);
-	seq_printf(m, " Wide Enabled:");
+	seq_puts(m, " Wide Enabled:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3601,10 +3584,10 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 			   i,
 			   (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done);
-	seq_printf(m, " Transfer Bit Width:");
+	seq_puts(m, " Transfer Bit Width:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3620,14 +3603,14 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 
 		if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) &&
 		    (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
-			seq_printf(m, "*");
+			seq_putc(m, '*');
 			renegotiate = 1;
 		}
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able);
-	seq_printf(m, " Synchronous Enabled:");
+	seq_puts(m, " Synchronous Enabled:");
 	for (i = 0; i <= ADV_MAX_TID; i++) {
 		if ((chip_scsi_id == i) ||
 		    ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) {
@@ -3638,7 +3621,7 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 			   i,
 			   (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done);
 	for (i = 0; i <= ADV_MAX_TID; i++) {
@@ -3657,14 +3640,14 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		seq_printf(m, "  %X:", i);
 
 		if ((lramword & 0x1F) == 0) {	/* Check for REQ/ACK Offset 0. */
-			seq_printf(m, " Asynchronous");
+			seq_puts(m, " Asynchronous");
 		} else {
-			seq_printf(m, " Transfer Period Factor: ");
+			seq_puts(m, " Transfer Period Factor: ");
 
 			if ((lramword & 0x1F00) == 0x1100) {	/* 80 Mhz */
-				seq_printf(m, "9 (80.0 Mhz),");
+				seq_puts(m, "9 (80.0 Mhz),");
 			} else if ((lramword & 0x1F00) == 0x1000) {	/* 40 Mhz */
-				seq_printf(m, "10 (40.0 Mhz),");
+				seq_puts(m, "10 (40.0 Mhz),");
 			} else {	/* 20 Mhz or below. */
 
 				period = (((lramword >> 8) * 25) + 50) / 4;
@@ -3684,16 +3667,15 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		}
 
 		if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) {
-			seq_printf(m, "*\n");
+			seq_puts(m, "*\n");
 			renegotiate = 1;
 		} else {
-			seq_printf(m, "\n");
+			seq_putc(m, '\n');
 		}
 	}
 
 	if (renegotiate) {
-		seq_printf(m,
-			   " * = Re-negotiation pending before next command.\n");
+		seq_puts(m, " * = Re-negotiation pending before next command.\n");
 	}
 }
 

drivers/scsi/aha152x.c

@@ -2490,299 +2490,296 @@ static void show_queues(struct Scsi_Host *shpnt)
 	disp_enintr(shpnt);
 }
 
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
 static void get_command(struct seq_file *m, Scsi_Cmnd * ptr)
 {
 	int i;
 
-	SPRINTF("%p: target=%d; lun=%d; cmnd=( ",
+	seq_printf(m, "%p: target=%d; lun=%d; cmnd=( ",
 		ptr, ptr->device->id, (u8)ptr->device->lun);
 
 	for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
-		SPRINTF("0x%02x ", ptr->cmnd[i]);
+		seq_printf(m, "0x%02x ", ptr->cmnd[i]);
 
-	SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |",
+	seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |",
 		scsi_get_resid(ptr), ptr->SCp.this_residual,
 		ptr->SCp.buffers_residual);
 
 	if (ptr->SCp.phase & not_issued)
-		SPRINTF("not issued|");
+		seq_puts(m, "not issued|");
 	if (ptr->SCp.phase & selecting)
-		SPRINTF("selecting|");
+		seq_puts(m, "selecting|");
 	if (ptr->SCp.phase & disconnected)
-		SPRINTF("disconnected|");
+		seq_puts(m, "disconnected|");
 	if (ptr->SCp.phase & aborted)
-		SPRINTF("aborted|");
+		seq_puts(m, "aborted|");
 	if (ptr->SCp.phase & identified)
-		SPRINTF("identified|");
+		seq_puts(m, "identified|");
 	if (ptr->SCp.phase & completed)
-		SPRINTF("completed|");
+		seq_puts(m, "completed|");
 	if (ptr->SCp.phase & spiordy)
-		SPRINTF("spiordy|");
+		seq_puts(m, "spiordy|");
 	if (ptr->SCp.phase & syncneg)
-		SPRINTF("syncneg|");
-	SPRINTF("; next=0x%p\n", SCNEXT(ptr));
+		seq_puts(m, "syncneg|");
+	seq_printf(m, "; next=0x%p\n", SCNEXT(ptr));
 }
 
 static void get_ports(struct seq_file *m, struct Scsi_Host *shpnt)
 {
 	int s;
 
-	SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
+	seq_printf(m, "\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
 
 	s = GETPORT(SCSISEQ);
-	SPRINTF("SCSISEQ( ");
+	seq_puts(m, "SCSISEQ( ");
 	if (s & TEMODEO)
-		SPRINTF("TARGET MODE ");
+		seq_puts(m, "TARGET MODE ");
 	if (s & ENSELO)
-		SPRINTF("SELO ");
+		seq_puts(m, "SELO ");
 	if (s & ENSELI)
-		SPRINTF("SELI ");
+		seq_puts(m, "SELI ");
 	if (s & ENRESELI)
-		SPRINTF("RESELI ");
+		seq_puts(m, "RESELI ");
 	if (s & ENAUTOATNO)
-		SPRINTF("AUTOATNO ");
+		seq_puts(m, "AUTOATNO ");
 	if (s & ENAUTOATNI)
-		SPRINTF("AUTOATNI ");
+		seq_puts(m, "AUTOATNI ");
 	if (s & ENAUTOATNP)
-		SPRINTF("AUTOATNP ");
+		seq_puts(m, "AUTOATNP ");
 	if (s & SCSIRSTO)
-		SPRINTF("SCSIRSTO ");
-	SPRINTF(");");
+		seq_puts(m, "SCSIRSTO ");
+	seq_puts(m, ");");
 
-	SPRINTF(" SCSISIG(");
+	seq_puts(m, " SCSISIG(");
 	s = GETPORT(SCSISIG);
 	switch (s & P_MASK) {
 	case P_DATAO:
-		SPRINTF("DATA OUT");
+		seq_puts(m, "DATA OUT");
 		break;
 	case P_DATAI:
-		SPRINTF("DATA IN");
+		seq_puts(m, "DATA IN");
 		break;
 	case P_CMD:
-		SPRINTF("COMMAND");
+		seq_puts(m, "COMMAND");
 		break;
 	case P_STATUS:
-		SPRINTF("STATUS");
+		seq_puts(m, "STATUS");
 		break;
 	case P_MSGO:
-		SPRINTF("MESSAGE OUT");
+		seq_puts(m, "MESSAGE OUT");
 		break;
 	case P_MSGI:
-		SPRINTF("MESSAGE IN");
+		seq_puts(m, "MESSAGE IN");
 		break;
 	default:
-		SPRINTF("*invalid*");
+		seq_puts(m, "*invalid*");
 		break;
 	}
 
-	SPRINTF("); ");
+	seq_puts(m, "); ");
 
-	SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
+	seq_printf(m, "INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
 
-	SPRINTF("SSTAT( ");
+	seq_puts(m, "SSTAT( ");
 	s = GETPORT(SSTAT0);
 	if (s & TARGET)
-		SPRINTF("TARGET ");
+		seq_puts(m, "TARGET ");
 	if (s & SELDO)
-		SPRINTF("SELDO ");
+		seq_puts(m, "SELDO ");
 	if (s & SELDI)
-		SPRINTF("SELDI ");
+		seq_puts(m, "SELDI ");
 	if (s & SELINGO)
-		SPRINTF("SELINGO ");
+		seq_puts(m, "SELINGO ");
 	if (s & SWRAP)
-		SPRINTF("SWRAP ");
+		seq_puts(m, "SWRAP ");
 	if (s & SDONE)
-		SPRINTF("SDONE ");
+		seq_puts(m, "SDONE ");
 	if (s & SPIORDY)
-		SPRINTF("SPIORDY ");
+		seq_puts(m, "SPIORDY ");
 	if (s & DMADONE)
-		SPRINTF("DMADONE ");
+		seq_puts(m, "DMADONE ");
 
 	s = GETPORT(SSTAT1);
 	if (s & SELTO)
-		SPRINTF("SELTO ");
+		seq_puts(m, "SELTO ");
 	if (s & ATNTARG)
-		SPRINTF("ATNTARG ");
+		seq_puts(m, "ATNTARG ");
 	if (s & SCSIRSTI)
-		SPRINTF("SCSIRSTI ");
+		seq_puts(m, "SCSIRSTI ");
 	if (s & PHASEMIS)
-		SPRINTF("PHASEMIS ");
+		seq_puts(m, "PHASEMIS ");
 	if (s & BUSFREE)
-		SPRINTF("BUSFREE ");
+		seq_puts(m, "BUSFREE ");
 	if (s & SCSIPERR)
-		SPRINTF("SCSIPERR ");
+		seq_puts(m, "SCSIPERR ");
 	if (s & PHASECHG)
-		SPRINTF("PHASECHG ");
+		seq_puts(m, "PHASECHG ");
 	if (s & REQINIT)
-		SPRINTF("REQINIT ");
-	SPRINTF("); ");
+		seq_puts(m, "REQINIT ");
+	seq_puts(m, "); ");
 
 
-	SPRINTF("SSTAT( ");
+	seq_puts(m, "SSTAT( ");
 
 	s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
 
 	if (s & TARGET)
-		SPRINTF("TARGET ");
+		seq_puts(m, "TARGET ");
 	if (s & SELDO)
-		SPRINTF("SELDO ");
+		seq_puts(m, "SELDO ");
 	if (s & SELDI)
-		SPRINTF("SELDI ");
+		seq_puts(m, "SELDI ");
 	if (s & SELINGO)
-		SPRINTF("SELINGO ");
+		seq_puts(m, "SELINGO ");
 	if (s & SWRAP)
-		SPRINTF("SWRAP ");
+		seq_puts(m, "SWRAP ");
 	if (s & SDONE)
-		SPRINTF("SDONE ");
+		seq_puts(m, "SDONE ");
 	if (s & SPIORDY)
-		SPRINTF("SPIORDY ");
+		seq_puts(m, "SPIORDY ");
 	if (s & DMADONE)
-		SPRINTF("DMADONE ");
+		seq_puts(m, "DMADONE ");
 
 	s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
 
 	if (s & SELTO)
-		SPRINTF("SELTO ");
+		seq_puts(m, "SELTO ");
 	if (s & ATNTARG)
-		SPRINTF("ATNTARG ");
+		seq_puts(m, "ATNTARG ");
 	if (s & SCSIRSTI)
-		SPRINTF("SCSIRSTI ");
+		seq_puts(m, "SCSIRSTI ");
 	if (s & PHASEMIS)
-		SPRINTF("PHASEMIS ");
+		seq_puts(m, "PHASEMIS ");
 	if (s & BUSFREE)
-		SPRINTF("BUSFREE ");
+		seq_puts(m, "BUSFREE ");
 	if (s & SCSIPERR)
-		SPRINTF("SCSIPERR ");
+		seq_puts(m, "SCSIPERR ");
 	if (s & PHASECHG)
-		SPRINTF("PHASECHG ");
+		seq_puts(m, "PHASECHG ");
 	if (s & REQINIT)
-		SPRINTF("REQINIT ");
-	SPRINTF("); ");
+		seq_puts(m, "REQINIT ");
+	seq_puts(m, "); ");
 
-	SPRINTF("SXFRCTL0( ");
+	seq_puts(m, "SXFRCTL0( ");
 
 	s = GETPORT(SXFRCTL0);
 	if (s & SCSIEN)
-		SPRINTF("SCSIEN ");
+		seq_puts(m, "SCSIEN ");
 	if (s & DMAEN)
-		SPRINTF("DMAEN ");
+		seq_puts(m, "DMAEN ");
 	if (s & CH1)
-		SPRINTF("CH1 ");
+		seq_puts(m, "CH1 ");
 	if (s & CLRSTCNT)
-		SPRINTF("CLRSTCNT ");
+		seq_puts(m, "CLRSTCNT ");
 	if (s & SPIOEN)
-		SPRINTF("SPIOEN ");
+		seq_puts(m, "SPIOEN ");
 	if (s & CLRCH1)
-		SPRINTF("CLRCH1 ");
-	SPRINTF("); ");
+		seq_puts(m, "CLRCH1 ");
+	seq_puts(m, "); ");
 
-	SPRINTF("SIGNAL( ");
+	seq_puts(m, "SIGNAL( ");
 
 	s = GETPORT(SCSISIG);
 	if (s & SIG_ATNI)
-		SPRINTF("ATNI ");
+		seq_puts(m, "ATNI ");
 	if (s & SIG_SELI)
-		SPRINTF("SELI ");
+		seq_puts(m, "SELI ");
 	if (s & SIG_BSYI)
-		SPRINTF("BSYI ");
+		seq_puts(m, "BSYI ");
 	if (s & SIG_REQI)
-		SPRINTF("REQI ");
+		seq_puts(m, "REQI ");
 	if (s & SIG_ACKI)
-		SPRINTF("ACKI ");
-	SPRINTF("); ");
+		seq_puts(m, "ACKI ");
+	seq_puts(m, "); ");
 
-	SPRINTF("SELID(%02x), ", GETPORT(SELID));
+	seq_printf(m, "SELID(%02x), ", GETPORT(SELID));
 
-	SPRINTF("STCNT(%d), ", GETSTCNT());
+	seq_printf(m, "STCNT(%d), ", GETSTCNT());
 
-	SPRINTF("SSTAT2( ");
+	seq_puts(m, "SSTAT2( ");
 
 	s = GETPORT(SSTAT2);
 	if (s & SOFFSET)
-		SPRINTF("SOFFSET ");
+		seq_puts(m, "SOFFSET ");
 	if (s & SEMPTY)
-		SPRINTF("SEMPTY ");
+		seq_puts(m, "SEMPTY ");
 	if (s & SFULL)
-		SPRINTF("SFULL ");
-	SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT));
+		seq_puts(m, "SFULL ");
+	seq_printf(m, "); SFCNT (%d); ", s & (SFULL | SFCNT));
 
 	s = GETPORT(SSTAT3);
-	SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
+	seq_printf(m, "SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
 
-	SPRINTF("SSTAT4( ");
+	seq_puts(m, "SSTAT4( ");
 	s = GETPORT(SSTAT4);
 	if (s & SYNCERR)
-		SPRINTF("SYNCERR ");
+		seq_puts(m, "SYNCERR ");
 	if (s & FWERR)
-		SPRINTF("FWERR ");
+		seq_puts(m, "FWERR ");
 	if (s & FRERR)
-		SPRINTF("FRERR ");
-	SPRINTF("); ");
+		seq_puts(m, "FRERR ");
+	seq_puts(m, "); ");
 
-	SPRINTF("DMACNTRL0( ");
+	seq_puts(m, "DMACNTRL0( ");
 	s = GETPORT(DMACNTRL0);
-	SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT");
-	SPRINTF("%s ", s & DMA ? "DMA" : "PIO");
-	SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ");
+	seq_printf(m, "%s ", s & _8BIT ? "8BIT" : "16BIT");
+	seq_printf(m, "%s ", s & DMA ? "DMA" : "PIO");
+	seq_printf(m, "%s ", s & WRITE_READ ? "WRITE" : "READ");
 	if (s & ENDMA)
-		SPRINTF("ENDMA ");
+		seq_puts(m, "ENDMA ");
 	if (s & INTEN)
-		SPRINTF("INTEN ");
+		seq_puts(m, "INTEN ");
 	if (s & RSTFIFO)
-		SPRINTF("RSTFIFO ");
+		seq_puts(m, "RSTFIFO ");
 	if (s & SWINT)
-		SPRINTF("SWINT ");
-	SPRINTF("); ");
+		seq_puts(m, "SWINT ");
+	seq_puts(m, "); ");
 
-	SPRINTF("DMASTAT( ");
+	seq_puts(m, "DMASTAT( ");
 	s = GETPORT(DMASTAT);
 	if (s & ATDONE)
-		SPRINTF("ATDONE ");
+		seq_puts(m, "ATDONE ");
 	if (s & WORDRDY)
-		SPRINTF("WORDRDY ");
+		seq_puts(m, "WORDRDY ");
 	if (s & DFIFOFULL)
-		SPRINTF("DFIFOFULL ");
+		seq_puts(m, "DFIFOFULL ");
 	if (s & DFIFOEMP)
-		SPRINTF("DFIFOEMP ");
-	SPRINTF(")\n");
+		seq_puts(m, "DFIFOEMP ");
+	seq_puts(m, ")\n");
 
-	SPRINTF("enabled interrupts( ");
+	seq_puts(m, "enabled interrupts( ");
 
 	s = GETPORT(SIMODE0);
 	if (s & ENSELDO)
-		SPRINTF("ENSELDO ");
+		seq_puts(m, "ENSELDO ");
 	if (s & ENSELDI)
-		SPRINTF("ENSELDI ");
+		seq_puts(m, "ENSELDI ");
 	if (s & ENSELINGO)
-		SPRINTF("ENSELINGO ");
+		seq_puts(m, "ENSELINGO ");
 	if (s & ENSWRAP)
-		SPRINTF("ENSWRAP ");
+		seq_puts(m, "ENSWRAP ");
 	if (s & ENSDONE)
-		SPRINTF("ENSDONE ");
+		seq_puts(m, "ENSDONE ");
 	if (s & ENSPIORDY)
-		SPRINTF("ENSPIORDY ");
+		seq_puts(m, "ENSPIORDY ");
 	if (s & ENDMADONE)
-		SPRINTF("ENDMADONE ");
+		seq_puts(m, "ENDMADONE ");
 
 	s = GETPORT(SIMODE1);
 	if (s & ENSELTIMO)
-		SPRINTF("ENSELTIMO ");
+		seq_puts(m, "ENSELTIMO ");
 	if (s & ENATNTARG)
-		SPRINTF("ENATNTARG ");
+		seq_puts(m, "ENATNTARG ");
 	if (s & ENPHASEMIS)
-		SPRINTF("ENPHASEMIS ");
+		seq_puts(m, "ENPHASEMIS ");
 	if (s & ENBUSFREE)
-		SPRINTF("ENBUSFREE ");
+		seq_puts(m, "ENBUSFREE ");
 	if (s & ENSCSIPERR)
-		SPRINTF("ENSCSIPERR ");
+		seq_puts(m, "ENSCSIPERR ");
 	if (s & ENPHASECHG)
-		SPRINTF("ENPHASECHG ");
+		seq_puts(m, "ENPHASECHG ");
 	if (s & ENREQINIT)
-		SPRINTF("ENREQINIT ");
-	SPRINTF(")\n");
+		seq_puts(m, "ENREQINIT ");
+	seq_puts(m, ")\n");
 }
 
 static int aha152x_set_info(struct Scsi_Host *shpnt, char *buffer, int length)
@@ -2825,56 +2822,56 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
 	Scsi_Cmnd *ptr;
 	unsigned long flags;
 
-	SPRINTF(AHA152X_REVID "\n");
+	seq_puts(m, AHA152X_REVID "\n");
 
-	SPRINTF("ioports 0x%04lx to 0x%04lx\n",
+	seq_printf(m, "ioports 0x%04lx to 0x%04lx\n",
 		shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
-	SPRINTF("interrupt 0x%02x\n", shpnt->irq);
-	SPRINTF("disconnection/reconnection %s\n",
+	seq_printf(m, "interrupt 0x%02x\n", shpnt->irq);
+	seq_printf(m, "disconnection/reconnection %s\n",
 		RECONNECT ? "enabled" : "disabled");
-	SPRINTF("parity checking %s\n",
+	seq_printf(m, "parity checking %s\n",
 		PARITY ? "enabled" : "disabled");
-	SPRINTF("synchronous transfers %s\n",
+	seq_printf(m, "synchronous transfers %s\n",
 		SYNCHRONOUS ? "enabled" : "disabled");
-	SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands);
+	seq_printf(m, "%d commands currently queued\n", HOSTDATA(shpnt)->commands);
 
 	if(SYNCHRONOUS) {
-		SPRINTF("synchronously operating targets (tick=50 ns):\n");
+		seq_puts(m, "synchronously operating targets (tick=50 ns):\n");
 		for (i = 0; i < 8; i++)
 			if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
-				SPRINTF("target %d: period %dT/%dns; req/ack offset %d\n",
+				seq_printf(m, "target %d: period %dT/%dns; req/ack offset %d\n",
 					i,
 					(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2),
 					(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
 				    HOSTDATA(shpnt)->syncrate[i] & 0x0f);
 	}
-	SPRINTF("\nqueue status:\n");
+	seq_puts(m, "\nqueue status:\n");
 	DO_LOCK(flags);
 	if (ISSUE_SC) {
-		SPRINTF("not yet issued commands:\n");
+		seq_puts(m, "not yet issued commands:\n");
 		for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
 			get_command(m, ptr);
 	} else
-		SPRINTF("no not yet issued commands\n");
+		seq_puts(m, "no not yet issued commands\n");
 	DO_UNLOCK(flags);
 
 	if (CURRENT_SC) {
-		SPRINTF("current command:\n");
+		seq_puts(m, "current command:\n");
 		get_command(m, CURRENT_SC);
 	} else
-		SPRINTF("no current command\n");
+		seq_puts(m, "no current command\n");
 
 	if (DISCONNECTED_SC) {
-		SPRINTF("disconnected commands:\n");
+		seq_puts(m, "disconnected commands:\n");
 		for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
 			get_command(m, ptr);
 	} else
-		SPRINTF("no disconnected commands\n");
+		seq_puts(m, "no disconnected commands\n");
 
 	get_ports(m, shpnt);
 
 #if defined(AHA152X_STAT)
-	SPRINTF("statistics:\n"
+	seq_printf(m, "statistics:\n"
 		"total commands:               %d\n"
 		"disconnections:               %d\n"
 		"busfree with check condition: %d\n"
@@ -2894,7 +2891,7 @@ static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
 		HOSTDATA(shpnt)->busfree_without_done_command,
 		HOSTDATA(shpnt)->busfree_without_any_action);
 	for(i=0; i<maxstate; i++) {
-		SPRINTF("%-10s %-12d %-12d %-12ld\n",
+		seq_printf(m, "%-10s %-12d %-12d %-12ld\n",
 			states[i].name,
 			HOSTDATA(shpnt)->count_trans[i],
 			HOSTDATA(shpnt)->count[i],

drivers/scsi/aic7xxx/aic79xx_proc.c

@@ -97,7 +97,7 @@ ahd_format_transinfo(struct seq_file *m, struct ahd_transinfo *tinfo)
 	u_int mb;
 
 	if (tinfo->period == AHD_PERIOD_UNKNOWN) {
-		seq_printf(m, "Renegotiation Pending\n");
+		seq_puts(m, "Renegotiation Pending\n");
 		return;
 	}
         speed = 3300;
@@ -119,40 +119,38 @@ ahd_format_transinfo(struct seq_file *m, struct ahd_transinfo *tinfo)
 		printed_options = 0;
 		seq_printf(m, " (%d.%03dMHz", freq / 1000, freq % 1000);
 		if ((tinfo->ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
-			seq_printf(m, " RDSTRM");
+			seq_puts(m, " RDSTRM");
 			printed_options++;
 		}
 		if ((tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
-			seq_printf(m, "%s", printed_options ? "|DT" : " DT");
+			seq_puts(m, printed_options ? "|DT" : " DT");
 			printed_options++;
 		}
 		if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
-			seq_printf(m, "%s", printed_options ? "|IU" : " IU");
+			seq_puts(m, printed_options ? "|IU" : " IU");
 			printed_options++;
 		}
 		if ((tinfo->ppr_options & MSG_EXT_PPR_RTI) != 0) {
-			seq_printf(m, "%s",
-				  printed_options ? "|RTI" : " RTI");
+			seq_puts(m, printed_options ? "|RTI" : " RTI");
 			printed_options++;
 		}
 		if ((tinfo->ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
-			seq_printf(m, "%s",
-				  printed_options ? "|QAS" : " QAS");
+			seq_puts(m, printed_options ? "|QAS" : " QAS");
 			printed_options++;
 		}
 	}
 
 	if (tinfo->width > 0) {
 		if (freq != 0) {
-			seq_printf(m, ", ");
+			seq_puts(m, ", ");
 		} else {
-			seq_printf(m, " (");
+			seq_puts(m, " (");
 		}
 		seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
 	} else if (freq != 0) {
-		seq_printf(m, ")");
+		seq_putc(m, ')');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 }
 
 static void
@@ -167,15 +165,15 @@ ahd_dump_target_state(struct ahd_softc *ahd, struct seq_file *m,
 	tinfo = ahd_fetch_transinfo(ahd, channel, our_id,
 				    target_id, &tstate);
 	seq_printf(m, "Target %d Negotiation Settings\n", target_id);
-	seq_printf(m, "\tUser: ");
+	seq_puts(m, "\tUser: ");
 	ahd_format_transinfo(m, &tinfo->user);
 	starget = ahd->platform_data->starget[target_id];
 	if (starget == NULL)
 		return;
 
-	seq_printf(m, "\tGoal: ");
+	seq_puts(m, "\tGoal: ");
 	ahd_format_transinfo(m, &tinfo->goal);
-	seq_printf(m, "\tCurr: ");
+	seq_puts(m, "\tCurr: ");
 	ahd_format_transinfo(m, &tinfo->curr);
 
 	for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
@@ -291,19 +289,19 @@ ahd_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
 	max_targ = 16;
 
 	if (ahd->seep_config == NULL)
-		seq_printf(m, "No Serial EEPROM\n");
+		seq_puts(m, "No Serial EEPROM\n");
 	else {
-		seq_printf(m, "Serial EEPROM:\n");
+		seq_puts(m, "Serial EEPROM:\n");
 		for (i = 0; i < sizeof(*ahd->seep_config)/2; i++) {
 			if (((i % 8) == 0) && (i != 0)) {
-				seq_printf(m, "\n");
+				seq_putc(m, '\n');
 			}
 			seq_printf(m, "0x%.4x ",
 				  ((uint16_t*)ahd->seep_config)[i]);
 		}
-		seq_printf(m, "\n");
+		seq_putc(m, '\n');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	if ((ahd->features & AHD_WIDE) == 0)
 		max_targ = 8;

drivers/scsi/aic7xxx/aic7xxx_proc.c

@@ -119,15 +119,15 @@ ahc_format_transinfo(struct seq_file *m, struct ahc_transinfo *tinfo)
 
 	if (tinfo->width > 0) {
 		if (freq != 0) {
-			seq_printf(m, ", ");
+			seq_puts(m, ", ");
 		} else {
-			seq_printf(m, " (");
+			seq_puts(m, " (");
 		}
 		seq_printf(m, "%dbit)", 8 * (0x01 << tinfo->width));
 	} else if (freq != 0) {
-		seq_printf(m, ")");
+		seq_putc(m, ')');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 }
 
 static void
@@ -145,15 +145,15 @@ ahc_dump_target_state(struct ahc_softc *ahc, struct seq_file *m,
 	if ((ahc->features & AHC_TWIN) != 0)
 		seq_printf(m, "Channel %c ", channel);
 	seq_printf(m, "Target %d Negotiation Settings\n", target_id);
-	seq_printf(m, "\tUser: ");
+	seq_puts(m, "\tUser: ");
 	ahc_format_transinfo(m, &tinfo->user);
 	starget = ahc->platform_data->starget[target_offset];
 	if (!starget)
 		return;
 
-	seq_printf(m, "\tGoal: ");
+	seq_puts(m, "\tGoal: ");
 	ahc_format_transinfo(m, &tinfo->goal);
-	seq_printf(m, "\tCurr: ");
+	seq_puts(m, "\tCurr: ");
 	ahc_format_transinfo(m, &tinfo->curr);
 
 	for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
@@ -303,19 +303,19 @@ ahc_linux_show_info(struct seq_file *m, struct Scsi_Host *shost)
 
 
 	if (ahc->seep_config == NULL)
-		seq_printf(m, "No Serial EEPROM\n");
+		seq_puts(m, "No Serial EEPROM\n");
 	else {
-		seq_printf(m, "Serial EEPROM:\n");
+		seq_puts(m, "Serial EEPROM:\n");
 		for (i = 0; i < sizeof(*ahc->seep_config)/2; i++) {
 			if (((i % 8) == 0) && (i != 0)) {
-				seq_printf(m, "\n");
+				seq_putc(m, '\n');
 			}
 			seq_printf(m, "0x%.4x ",
 				  ((uint16_t*)ahc->seep_config)[i]);
 		}
-		seq_printf(m, "\n");
+		seq_putc(m, '\n');
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	max_targ = 16;
 	if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)

drivers/scsi/arm/fas216.c

@@ -2990,7 +2990,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
 	struct fas216_device *dev;
 	struct scsi_device *scd;
 
-	seq_printf(m, "Device/Lun TaggedQ       Parity   Sync\n");
+	seq_puts(m, "Device/Lun TaggedQ       Parity   Sync\n");
 
 	shost_for_each_device(scd, info->host) {
 		dev = &info->device[scd->id];
@@ -3000,7 +3000,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
 				     scd->simple_tags ? "en" : "dis",
 				     scd->current_tag);
 		else
-			seq_printf(m, "unsupported   ");
+			seq_puts(m, "unsupported   ");
 
 		seq_printf(m, "%3sabled ", dev->parity_enabled ? "en" : "dis");
 
@@ -3008,7 +3008,7 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
 			seq_printf(m, "offset %d, %d ns\n",
 				     dev->sof, dev->period * 4);
 		else
-			seq_printf(m, "async\n");
+			seq_puts(m, "async\n");
 	}
 }
 

drivers/scsi/atari_NCR5380.c

@@ -711,12 +711,12 @@ static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
 	unsigned char *command;
 	seq_printf(m, "scsi%d: destination target %d, lun %llu\n",
 		H_NO(cmd), cmd->device->id, cmd->device->lun);
-	seq_printf(m, "        command = ");
+	seq_puts(m, "        command = ");
 	command = cmd->cmnd;
 	seq_printf(m, "%2d (0x%02x)", command[0], command[0]);
 	for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
 		seq_printf(m, " %02x", command[i]);
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 }
 
 static int __maybe_unused NCR5380_show_info(struct seq_file *m,

drivers/scsi/atp870u.c

@@ -3101,9 +3101,8 @@ static const char *atp870u_info(struct Scsi_Host *notused)
 
 static int atp870u_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
 {
-	seq_printf(m, "ACARD AEC-671X Driver Version: 2.6+ac\n");
-	seq_printf(m, "\n");
-	seq_printf(m, "Adapter Configuration:\n");
+	seq_puts(m, "ACARD AEC-671X Driver Version: 2.6+ac\n\n"
+		"Adapter Configuration:\n");
 	seq_printf(m, "               Base IO: %#.4lx\n", HBAptr->io_port);
 	seq_printf(m, "                   IRQ: %d\n", HBAptr->irq);
 	return 0;

drivers/scsi/ch.c

@@ -194,16 +194,10 @@ ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len,
 
  retry:
 	errno = 0;
-	if (debug) {
-		DPRINTK("command: ");
-		__scsi_print_command(cmd, cmd_len);
-	}
-
 	result = scsi_execute_req(ch->device, cmd, direction, buffer,
 				  buflength, &sshdr, timeout * HZ,
 				  MAX_RETRIES, NULL);
 
-	DPRINTK("result: 0x%x\n",result);
 	if (driver_byte(result) & DRIVER_SENSE) {
 		if (debug)
 			scsi_print_sense_hdr(ch->device, ch->name, &sshdr);

drivers/scsi/constants.c

@@ -18,14 +18,10 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dbg.h>
 
-
-
 /* Commands with service actions that change the command name */
 #define THIRD_PARTY_COPY_OUT 0x83
 #define THIRD_PARTY_COPY_IN 0x84
 
-#define VENDOR_SPECIFIC_CDB 0xc0
-
 struct sa_name_list {
 	int opcode;
 	const struct value_name_pair *arr;
@@ -37,7 +33,6 @@ struct value_name_pair {
 	const char * name;
 };
 
-#ifdef CONFIG_SCSI_CONSTANTS
 static const char * cdb_byte0_names[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
@@ -261,28 +256,8 @@ static struct sa_name_list sa_names_arr[] = {
 	{0, NULL, 0},
 };
 
-#else /* ifndef CONFIG_SCSI_CONSTANTS */
-static const char *cdb_byte0_names[0];
-
-static struct sa_name_list sa_names_arr[] = {
-	{VARIABLE_LENGTH_CMD, NULL, 0},
-	{MAINTENANCE_IN, NULL, 0},
-	{MAINTENANCE_OUT, NULL, 0},
-	{PERSISTENT_RESERVE_IN, NULL, 0},
-	{PERSISTENT_RESERVE_OUT, NULL, 0},
-	{SERVICE_ACTION_IN_12, NULL, 0},
-	{SERVICE_ACTION_OUT_12, NULL, 0},
-	{SERVICE_ACTION_BIDIRECTIONAL, NULL, 0},
-	{SERVICE_ACTION_IN_16, NULL, 0},
-	{SERVICE_ACTION_OUT_16, NULL, 0},
-	{THIRD_PARTY_COPY_IN, NULL, 0},
-	{THIRD_PARTY_COPY_OUT, NULL, 0},
-	{0, NULL, 0},
-};
-#endif /* CONFIG_SCSI_CONSTANTS */
-
-static bool scsi_opcode_sa_name(int opcode, int service_action,
-				const char **cdb_name, const char **sa_name)
+bool scsi_opcode_sa_name(int opcode, int service_action,
+			 const char **cdb_name, const char **sa_name)
 {
 	struct sa_name_list *sa_name_ptr;
 	const struct value_name_pair *arr = NULL;
@@ -315,76 +290,6 @@ static bool scsi_opcode_sa_name(int opcode, int service_action,
 	return true;
 }
 
-static void print_opcode_name(const unsigned char *cdbp, size_t cdb_len)
-{
-	int sa, cdb0;
-	const char *cdb_name = NULL, *sa_name = NULL;
-
-	cdb0 = cdbp[0];
-	if (cdb0 == VARIABLE_LENGTH_CMD) {
-		if (cdb_len < 10) {
-			printk("short variable length command, len=%zu",
-			       cdb_len);
-			return;
-		}
-		sa = (cdbp[8] << 8) + cdbp[9];
-	} else
-		sa = cdbp[1] & 0x1f;
-
-	if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) {
-		if (cdb_name)
-			printk("%s", cdb_name);
-		else if (cdb0 >= VENDOR_SPECIFIC_CDB)
-			printk("cdb[0]=0x%x (vendor)", cdb0);
-		else if (cdb0 >= 0x60 && cdb0 < 0x7e)
-			printk("cdb[0]=0x%x (reserved)", cdb0);
-		else
-			printk("cdb[0]=0x%x", cdb0);
-	} else {
-		if (sa_name)
-			printk("%s", sa_name);
-		else if (cdb_name)
-			printk("%s, sa=0x%x", cdb_name, sa);
-		else
-			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
-	}
-}
-
-void __scsi_print_command(const unsigned char *cdb, size_t cdb_len)
-{
-	int k, len;
-
-	print_opcode_name(cdb, cdb_len);
-	len = scsi_command_size(cdb);
-	if (cdb_len < len)
-		len = cdb_len;
-	/* print out all bytes in cdb */
-	for (k = 0; k < len; ++k)
-		printk(" %02x", cdb[k]);
-	printk("\n");
-}
-EXPORT_SYMBOL(__scsi_print_command);
-
-void scsi_print_command(struct scsi_cmnd *cmd)
-{
-	int k;
-
-	if (cmd->cmnd == NULL)
-		return;
-
-	scmd_printk(KERN_INFO, cmd, "CDB: ");
-	print_opcode_name(cmd->cmnd, cmd->cmd_len);
-
-	/* print out all bytes in cdb */
-	printk(":");
-	for (k = 0; k < cmd->cmd_len; ++k)
-		printk(" %02x", cmd->cmnd[k]);
-	printk("\n");
-}
-EXPORT_SYMBOL(scsi_print_command);
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
 struct error_info {
 	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
 	const char * text;
@@ -392,7 +297,7 @@ struct error_info {
 
 /*
  * The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
  */
 
 static const struct error_info additional[] =
@@ -421,6 +326,7 @@ static const struct error_info additional[] =
 	{0x001E, "Conflicting SA creation request"},
 	{0x001F, "Logical unit transitioning to another power condition"},
 	{0x0020, "Extended copy information available"},
+	{0x0021, "Atomic command aborted due to ACA"},
 
 	{0x0100, "No index/sector signal"},
 
@@ -446,6 +352,7 @@ static const struct error_info additional[] =
 	{0x040C, "Logical unit not accessible, target port in unavailable "
 	 "state"},
 	{0x040D, "Logical unit not ready, structure check required"},
+	{0x040E, "Logical unit not ready, security session in progress"},
 	{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
 	{0x0411, "Logical unit not ready, notify (enable spinup) required"},
 	{0x0412, "Logical unit not ready, offline"},
@@ -462,6 +369,11 @@ static const struct error_info additional[] =
 	{0x041C, "Logical unit not ready, additional power use not yet "
 	 "granted"},
 	{0x041D, "Logical unit not ready, configuration in progress"},
+	{0x041E, "Logical unit not ready, microcode activation required"},
+	{0x041F, "Logical unit not ready, microcode download required"},
+	{0x0420, "Logical unit not ready, logical unit reset required"},
+	{0x0421, "Logical unit not ready, hard reset required"},
+	{0x0422, "Logical unit not ready, power cycle required"},
 
 	{0x0500, "Logical unit does not respond to selection"},
 
@@ -480,6 +392,7 @@ static const struct error_info additional[] =
 	{0x0902, "Focus servo failure"},
 	{0x0903, "Spindle servo failure"},
 	{0x0904, "Head select fault"},
+	{0x0905, "Vibration induced tracking error"},
 
 	{0x0A00, "Error log overflow"},
 
@@ -510,6 +423,7 @@ static const struct error_info additional[] =
 	{0x0C0D, "Write error - not enough unsolicited data"},
 	{0x0C0E, "Multiple write errors"},
 	{0x0C0F, "Defects in error window"},
+	{0x0C10, "Incomplete multiple atomic write operations"},
 
 	{0x0D00, "Error detected by third party temporary initiator"},
 	{0x0D01, "Third party device failure"},
@@ -635,6 +549,10 @@ static const struct error_info additional[] =
 	{0x2101, "Invalid element address"},
 	{0x2102, "Invalid address for write"},
 	{0x2103, "Invalid write crossing layer jump"},
+	{0x2104, "Unaligned write command"},
+	{0x2105, "Write boundary violation"},
+	{0x2106, "Attempt to read invalid data"},
+	{0x2107, "Read boundary violation"},
 
 	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
 
@@ -691,6 +609,7 @@ static const struct error_info additional[] =
 	{0x2705, "Permanent write protect"},
 	{0x2706, "Conditional write protect"},
 	{0x2707, "Space allocation failed write protect"},
+	{0x2708, "Zone is read only"},
 
 	{0x2800, "Not ready to ready change, medium may have changed"},
 	{0x2801, "Import or export element accessed"},
@@ -743,10 +662,15 @@ static const struct error_info additional[] =
 	{0x2C0A, "Partition or collection contains user objects"},
 	{0x2C0B, "Not reserved"},
 	{0x2C0C, "Orwrite generation does not match"},
+	{0x2C0D, "Reset write pointer not allowed"},
+	{0x2C0E, "Zone is offline"},
 
 	{0x2D00, "Overwrite error on update in place"},
 
 	{0x2E00, "Insufficient time for operation"},
+	{0x2E01, "Command timeout before processing"},
+	{0x2E02, "Command timeout during processing"},
+	{0x2E03, "Command timeout during processing due to error recovery"},
 
 	{0x2F00, "Commands cleared by another initiator"},
 	{0x2F01, "Commands cleared by power loss notification"},
@@ -868,6 +792,7 @@ static const struct error_info additional[] =
 	{0x3F13, "iSCSI IP address removed"},
 	{0x3F14, "iSCSI IP address changed"},
 	{0x3F15, "Inspect referrals sense descriptors"},
+	{0x3F16, "Microcode has been changed without reset"},
 /*
  *	{0x40NN, "Ram failure"},
  *	{0x40NN, "Diagnostic failure on component nn"},
@@ -946,6 +871,11 @@ static const struct error_info additional[] =
 	{0x5306, "Volume identifier missing"},
 	{0x5307, "Duplicate volume identifier"},
 	{0x5308, "Element status unknown"},
+	{0x5309, "Data transfer device error - load failed"},
+	{0x530a, "Data transfer device error - unload failed"},
+	{0x530b, "Data transfer device error - unload missing"},
+	{0x530c, "Data transfer device error - eject failed"},
+	{0x530d, "Data transfer device error - library communication failed"},
 
 	{0x5400, "Scsi to host system interface failure"},
 
@@ -963,6 +893,7 @@ static const struct error_info additional[] =
 	{0x550B, "Insufficient power for operation"},
 	{0x550C, "Insufficient resources to create rod"},
 	{0x550D, "Insufficient resources to create rod token"},
+	{0x550E, "Insufficient zone resources"},
 
 	{0x5700, "Unable to recover table-of-contents"},
 
@@ -1247,15 +1178,12 @@ static const char * const snstext[] = {
 	"Completed",	    /* F: command completed sense data reported,
 				  may occur for successful command */
 };
-#endif
 
 /* Get sense key string or NULL if not available */
 const char *
 scsi_sense_key_string(unsigned char key) {
-#ifdef CONFIG_SCSI_CONSTANTS
 	if (key <= 0xE)
 		return snstext[key];
-#endif
 	return NULL;
 }
 EXPORT_SYMBOL(scsi_sense_key_string);
@@ -1267,7 +1195,6 @@ EXPORT_SYMBOL(scsi_sense_key_string);
 const char *
 scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
 {
-#ifdef CONFIG_SCSI_CONSTANTS
 	int i;
 	unsigned short code = ((asc << 8) | ascq);
 
@@ -1283,122 +1210,10 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
 			return additional2[i].str;
 		}
 	}
-#else
-	*fmt = NULL;
-#endif
 	return NULL;
 }
 EXPORT_SYMBOL(scsi_extd_sense_format);
 
-void
-scsi_show_extd_sense(const struct scsi_device *sdev, const char *name,
-		     unsigned char asc, unsigned char ascq)
-{
-	const char *extd_sense_fmt = NULL;
-	const char *extd_sense_str = scsi_extd_sense_format(asc, ascq,
-							    &extd_sense_fmt);
-
-	if (extd_sense_str) {
-		if (extd_sense_fmt)
-			sdev_prefix_printk(KERN_INFO, sdev, name,
-					   "Add. Sense: %s (%s%x)",
-					   extd_sense_str, extd_sense_fmt,
-					   ascq);
-		else
-			sdev_prefix_printk(KERN_INFO, sdev, name,
-					   "Add. Sense: %s", extd_sense_str);
-
-	} else {
-		sdev_prefix_printk(KERN_INFO, sdev, name,
-				   "%sASC=0x%x %sASCQ=0x%x\n",
-				   asc >= 0x80 ? "<<vendor>> " : "", asc,
-				   ascq >= 0x80 ? "<<vendor>> " : "", ascq);
-	}
-}
-EXPORT_SYMBOL(scsi_show_extd_sense);
-
-void
-scsi_show_sense_hdr(const struct scsi_device *sdev, const char *name,
-		    const struct scsi_sense_hdr *sshdr)
-{
-	const char *sense_txt;
-
-	sense_txt = scsi_sense_key_string(sshdr->sense_key);
-	if (sense_txt)
-		sdev_prefix_printk(KERN_INFO, sdev, name,
-				   "Sense Key : %s [%s]%s\n", sense_txt,
-				   scsi_sense_is_deferred(sshdr) ?
-				   "deferred" : "current",
-				   sshdr->response_code >= 0x72 ?
-				   " [descriptor]" : "");
-	else
-		sdev_prefix_printk(KERN_INFO, sdev, name,
-				   "Sense Key : 0x%x [%s]%s", sshdr->sense_key,
-				   scsi_sense_is_deferred(sshdr) ?
-				   "deferred" : "current",
-				   sshdr->response_code >= 0x72 ?
-				   " [descriptor]" : "");
-}
-EXPORT_SYMBOL(scsi_show_sense_hdr);
-
-/*
- * Print normalized SCSI sense header with a prefix.
- */
-void
-scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name,
-		     const struct scsi_sense_hdr *sshdr)
-{
-	scsi_show_sense_hdr(sdev, name, sshdr);
-	scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq);
-}
-EXPORT_SYMBOL(scsi_print_sense_hdr);
-
-static void
-scsi_dump_sense_buffer(const unsigned char *sense_buffer, int sense_len)
-{
-	int k, num;
-
-	num = (sense_len < 32) ? sense_len : 32;
-	printk("Unrecognized sense data (in hex):");
-	for (k = 0; k < num; ++k) {
-		if (0 == (k % 16)) {
-			printk("\n");
-			printk(KERN_INFO "        ");
-		}
-		printk("%02x ", sense_buffer[k]);
-	}
-	printk("\n");
-	return;
-}
-
-/* Normalize and print sense buffer with name prefix */
-void __scsi_print_sense(const struct scsi_device *sdev, const char *name,
-			const unsigned char *sense_buffer, int sense_len)
-{
-	struct scsi_sense_hdr sshdr;
-
-	if (!scsi_normalize_sense(sense_buffer, sense_len, &sshdr)) {
-		scsi_dump_sense_buffer(sense_buffer, sense_len);
-		return;
-	}
-	scsi_show_sense_hdr(sdev, name, &sshdr);
-	scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq);
-}
-EXPORT_SYMBOL(__scsi_print_sense);
-
-/* Normalize and print sense buffer in SCSI command */
-void scsi_print_sense(const struct scsi_cmnd *cmd)
-{
-	struct gendisk *disk = cmd->request->rq_disk;
-	const char *disk_name = disk ? disk->disk_name : NULL;
-
-	__scsi_print_sense(cmd->device, disk_name, cmd->sense_buffer,
-			   SCSI_SENSE_BUFFERSIZE);
-}
-EXPORT_SYMBOL(scsi_print_sense);
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
 static const char * const hostbyte_table[]={
 "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
 "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
@@ -1410,17 +1225,13 @@ static const char * const driverbyte_table[]={
 "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT",  "DRIVER_MEDIA", "DRIVER_ERROR",
 "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
 
-#endif
-
 const char *scsi_hostbyte_string(int result)
 {
 	const char *hb_string = NULL;
-#ifdef CONFIG_SCSI_CONSTANTS
 	int hb = host_byte(result);
 
 	if (hb < ARRAY_SIZE(hostbyte_table))
 		hb_string = hostbyte_table[hb];
-#endif
 	return hb_string;
 }
 EXPORT_SYMBOL(scsi_hostbyte_string);
@@ -1428,17 +1239,14 @@ EXPORT_SYMBOL(scsi_hostbyte_string);
 const char *scsi_driverbyte_string(int result)
 {
 	const char *db_string = NULL;
-#ifdef CONFIG_SCSI_CONSTANTS
 	int db = driver_byte(result);
 
 	if (db < ARRAY_SIZE(driverbyte_table))
 		db_string = driverbyte_table[db];
-#endif
 	return db_string;
 }
 EXPORT_SYMBOL(scsi_driverbyte_string);
 
-#ifdef CONFIG_SCSI_CONSTANTS
 #define scsi_mlreturn_name(result)	{ result, #result }
 static const struct value_name_pair scsi_mlreturn_arr[] = {
 	scsi_mlreturn_name(NEEDS_RETRY),
@@ -1451,11 +1259,9 @@ static const struct value_name_pair scsi_mlreturn_arr[] = {
 	scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED),
 	scsi_mlreturn_name(FAST_IO_FAIL)
 };
-#endif
 
 const char *scsi_mlreturn_string(int result)
 {
-#ifdef CONFIG_SCSI_CONSTANTS
 	const struct value_name_pair *arr = scsi_mlreturn_arr;
 	int k;
 
@@ -1463,29 +1269,6 @@ const char *scsi_mlreturn_string(int result)
 		if (result == arr->value)
 			return arr->name;
 	}
-#endif
 	return NULL;
 }
 EXPORT_SYMBOL(scsi_mlreturn_string);
-
-void scsi_print_result(struct scsi_cmnd *cmd, const char *msg, int disposition)
-{
-	const char *mlret_string = scsi_mlreturn_string(disposition);
-	const char *hb_string = scsi_hostbyte_string(cmd->result);
-	const char *db_string = scsi_driverbyte_string(cmd->result);
-
-	if (hb_string || db_string)
-		scmd_printk(KERN_INFO, cmd,
-			    "%s%s Result: hostbyte=%s driverbyte=%s",
-			    msg ? msg : "",
-			    mlret_string ? mlret_string : "UNKNOWN",
-			    hb_string ? hb_string : "invalid",
-			    db_string ? db_string : "invalid");
-	else
-		scmd_printk(KERN_INFO, cmd,
-			    "%s%s Result: hostbyte=0x%02x driverbyte=0x%02x",
-			    msg ? msg : "",
-			    mlret_string ? mlret_string : "UNKNOWN",
-			    host_byte(cmd->result), driver_byte(cmd->result));
-}
-EXPORT_SYMBOL(scsi_print_result);

drivers/scsi/dc395x.c

@@ -4610,13 +4610,10 @@ static void adapter_uninit(struct AdapterCtlBlk *acb)
 }
 
 
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m,##args)
-
 #undef YESNO
 #define YESNO(YN) \
- if (YN) SPRINTF(" Yes ");\
- else SPRINTF(" No  ")
+ if (YN) seq_printf(m, " Yes ");\
+ else seq_printf(m, " No  ")
 
 static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
@@ -4626,47 +4623,45 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
 	unsigned long flags;
 	int dev;
 
-	SPRINTF(DC395X_BANNER " PCI SCSI Host Adapter\n");
-	SPRINTF(" Driver Version " DC395X_VERSION "\n");
+	seq_puts(m, DC395X_BANNER " PCI SCSI Host Adapter\n"
+		" Driver Version " DC395X_VERSION "\n");
 
 	DC395x_LOCK_IO(acb->scsi_host, flags);
 
-	SPRINTF("SCSI Host Nr %i, ", host->host_no);
-	SPRINTF("DC395U/UW/F DC315/U %s\n",
+	seq_printf(m, "SCSI Host Nr %i, ", host->host_no);
+	seq_printf(m, "DC395U/UW/F DC315/U %s\n",
 		(acb->config & HCC_WIDE_CARD) ? "Wide" : "");
-	SPRINTF("io_port_base 0x%04lx, ", acb->io_port_base);
-	SPRINTF("irq_level 0x%04x, ", acb->irq_level);
-	SPRINTF(" SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
+	seq_printf(m, "io_port_base 0x%04lx, ", acb->io_port_base);
+	seq_printf(m, "irq_level 0x%04x, ", acb->irq_level);
+	seq_printf(m, " SelTimeout %ims\n", (1638 * acb->sel_timeout) / 1000);
 
-	SPRINTF("MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
-	SPRINTF("AdapterID %i\n", host->this_id);
+	seq_printf(m, "MaxID %i, MaxLUN %llu, ", host->max_id, host->max_lun);
+	seq_printf(m, "AdapterID %i\n", host->this_id);
 
-	SPRINTF("tag_max_num %i", acb->tag_max_num);
-	/*SPRINTF(", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
-	SPRINTF(", FilterCfg 0x%02x",
+	seq_printf(m, "tag_max_num %i", acb->tag_max_num);
+	/*seq_printf(m, ", DMA_Status %i\n", DC395x_read8(acb, TRM_S1040_DMA_STATUS)); */
+	seq_printf(m, ", FilterCfg 0x%02x",
 		DC395x_read8(acb, TRM_S1040_SCSI_CONFIG1));
-	SPRINTF(", DelayReset %is\n", acb->eeprom.delay_time);
-	/*SPRINTF("\n"); */
+	seq_printf(m, ", DelayReset %is\n", acb->eeprom.delay_time);
+	/*seq_printf(m, "\n"); */
 
-	SPRINTF("Nr of DCBs: %i\n", list_size(&acb->dcb_list));
-	SPRINTF
-	    ("Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+	seq_printf(m, "Nr of DCBs: %i\n", list_size(&acb->dcb_list));
+	seq_printf(m, "Map of attached LUNs: %02x %02x %02x %02x %02x %02x %02x %02x\n",
 	     acb->dcb_map[0], acb->dcb_map[1], acb->dcb_map[2],
 	     acb->dcb_map[3], acb->dcb_map[4], acb->dcb_map[5],
 	     acb->dcb_map[6], acb->dcb_map[7]);
-	SPRINTF
-	    ("                      %02x %02x %02x %02x %02x %02x %02x %02x\n",
+	seq_printf(m, "                      %02x %02x %02x %02x %02x %02x %02x %02x\n",
 	     acb->dcb_map[8], acb->dcb_map[9], acb->dcb_map[10],
 	     acb->dcb_map[11], acb->dcb_map[12], acb->dcb_map[13],
 	     acb->dcb_map[14], acb->dcb_map[15]);
 
-	SPRINTF
-	    ("Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
+	seq_puts(m,
+		 "Un ID LUN Prty Sync Wide DsCn SndS TagQ nego_period SyncFreq SyncOffs MaxCmd\n");
 
 	dev = 0;
 	list_for_each_entry(dcb, &acb->dcb_list, list) {
 		int nego_period;
-		SPRINTF("%02i %02i  %02i ", dev, dcb->target_id,
+		seq_printf(m, "%02i %02i  %02i ", dev, dcb->target_id,
 			dcb->target_lun);
 		YESNO(dcb->dev_mode & NTC_DO_PARITY_CHK);
 		YESNO(dcb->sync_offset);
@@ -4676,53 +4671,53 @@ static int dc395x_show_info(struct seq_file *m, struct Scsi_Host *host)
 		YESNO(dcb->sync_mode & EN_TAG_QUEUEING);
 		nego_period = clock_period[dcb->sync_period & 0x07] << 2;
 		if (dcb->sync_offset)
-			SPRINTF("  %03i ns ", nego_period);
+			seq_printf(m, "  %03i ns ", nego_period);
 		else
-			SPRINTF(" (%03i ns)", (dcb->min_nego_period << 2));
+			seq_printf(m, " (%03i ns)", (dcb->min_nego_period << 2));
 
 		if (dcb->sync_offset & 0x0f) {
 			spd = 1000 / (nego_period);
 			spd1 = 1000 % (nego_period);
 			spd1 = (spd1 * 10 + nego_period / 2) / (nego_period);
-			SPRINTF("   %2i.%1i M     %02i ", spd, spd1,
+			seq_printf(m, "   %2i.%1i M     %02i ", spd, spd1,
 				(dcb->sync_offset & 0x0f));
 		} else
-			SPRINTF("                 ");
+			seq_puts(m, "                 ");
 
 		/* Add more info ... */
-		SPRINTF("     %02i\n", dcb->max_command);
+		seq_printf(m, "     %02i\n", dcb->max_command);
 		dev++;
 	}
 
 	if (timer_pending(&acb->waiting_timer))
-		SPRINTF("Waiting queue timer running\n");
+		seq_puts(m, "Waiting queue timer running\n");
 	else
-		SPRINTF("\n");
+		seq_putc(m, '\n');
 
 	list_for_each_entry(dcb, &acb->dcb_list, list) {
 		struct ScsiReqBlk *srb;
 		if (!list_empty(&dcb->srb_waiting_list))
-			SPRINTF("DCB (%02i-%i): Waiting: %i:",
+			seq_printf(m, "DCB (%02i-%i): Waiting: %i:",
 				dcb->target_id, dcb->target_lun,
 				list_size(&dcb->srb_waiting_list));
                 list_for_each_entry(srb, &dcb->srb_waiting_list, list)
-			SPRINTF(" %p", srb->cmd);
+			seq_printf(m, " %p", srb->cmd);
 		if (!list_empty(&dcb->srb_going_list))
-			SPRINTF("\nDCB (%02i-%i): Going  : %i:",
+			seq_printf(m, "\nDCB (%02i-%i): Going  : %i:",
 				dcb->target_id, dcb->target_lun,
 				list_size(&dcb->srb_going_list));
 		list_for_each_entry(srb, &dcb->srb_going_list, list)
-			SPRINTF(" %p", srb->cmd);
+			seq_printf(m, " %p", srb->cmd);
 		if (!list_empty(&dcb->srb_waiting_list) || !list_empty(&dcb->srb_going_list))
-			SPRINTF("\n");
+			seq_putc(m, '\n');
 	}
 
 	if (debug_enabled(DBG_1)) {
-		SPRINTF("DCB list for ACB %p:\n", acb);
+		seq_printf(m, "DCB list for ACB %p:\n", acb);
 		list_for_each_entry(dcb, &acb->dcb_list, list) {
-			SPRINTF("%p -> ", dcb);
+			seq_printf(m, "%p -> ", dcb);
 		}
-		SPRINTF("END\n");
+		seq_puts(m, "END\n");
 	}
 
 	DC395x_UNLOCK_IO(acb->scsi_host, flags);

drivers/scsi/dpt_i2o.c

@@ -568,7 +568,7 @@ static int adpt_show_info(struct seq_file *m, struct Scsi_Host *host)
 	seq_printf(m, "\tpost fifo size  = %d\n\treply fifo size = %d\n\tsg table size   = %d\n\n",
 			host->can_queue, (int) pHba->reply_fifo_size , host->sg_tablesize);
 
-	seq_printf(m, "Devices:\n");
+	seq_puts(m, "Devices:\n");
 	for(chan = 0; chan < MAX_CHANNEL; chan++) {
 		for(id = 0; id < MAX_ID; id++) {
 			d = pHba->channel[chan].device[id];

drivers/scsi/eata_pio.c

@@ -102,7 +102,7 @@ static int eata_pio_show_info(struct seq_file *m, struct Scsi_Host *shost)
 		   shost->host_no, SD(shost)->name);
 	seq_printf(m, "Firmware revision: v%s\n",
 		   SD(shost)->revision);
-	seq_printf(m, "IO: PIO\n");
+	seq_puts(m, "IO: PIO\n");
 	seq_printf(m, "Base IO : %#.4x\n", (u32) shost->base);
 	seq_printf(m, "Host Bus: %s\n",
 		   (SD(shost)->bustype == 'P')?"PCI ":

drivers/scsi/esas2r/esas2r_main.c

@@ -749,7 +749,7 @@ int esas2r_show_info(struct seq_file *m, struct Scsi_Host *sh)
 	if (dev_count == 0)
 		seq_puts(m, "none\n");
 
-	seq_puts(m, "\n");
+	seq_putc(m, '\n');
 	return 0;
 
 }

drivers/scsi/esp_scsi.c

@@ -2396,8 +2396,6 @@ int scsi_esp_register(struct esp *esp, struct device *dev)
 
 	if (!esp->num_tags)
 		esp->num_tags = ESP_DEFAULT_TAGS;
-	else if (esp->num_tags >= ESP_MAX_TAG)
-		esp->num_tags = ESP_MAX_TAG - 1;
 	esp->host->transportt = esp_transport_template;
 	esp->host->max_lun = ESP_MAX_LUN;
 	esp->host->cmd_per_lun = 2;

drivers/scsi/gdth_proc.c

@@ -173,7 +173,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
     /* request is i.e. "cat /proc/scsi/gdth/0" */ 
     /* format: %-15s\t%-10s\t%-15s\t%s */
     /* driver parameters */
-    seq_printf(m, "Driver Parameters:\n");
+    seq_puts(m, "Driver Parameters:\n");
     if (reserve_list[0] == 0xff)
         strcpy(hrec, "--");
     else {
@@ -192,7 +192,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
                    max_ids, hdr_channel);
 
     /* controller information */
-    seq_printf(m,"\nDisk Array Controller Information:\n");
+    seq_puts(m, "\nDisk Array Controller Information:\n");
     seq_printf(m,
                    " Number:       \t%d         \tName:          \t%s\n",
                    ha->hanum, ha->binfo.type_string);
@@ -219,7 +219,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
 
 #ifdef GDTH_DMA_STATISTICS
     /* controller statistics */
-    seq_printf(m,"\nController Statistics:\n");
+    seq_puts(m, "\nController Statistics:\n");
     seq_printf(m,
                    " 32-bit DMA buffer:\t%lu\t64-bit DMA buffer:\t%lu\n",
                    ha->dma32_cnt, ha->dma64_cnt);
@@ -227,7 +227,7 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
 
     if (ha->more_proc) {
         /* more information: 2. about physical devices */
-        seq_printf(m, "\nPhysical Devices:");
+        seq_puts(m, "\nPhysical Devices:");
         flag = FALSE;
             
         buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr);
@@ -326,10 +326,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
         gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
 
         if (!flag)
-            seq_printf(m, "\n --\n");
+            seq_puts(m, "\n --\n");
 
         /* 3. about logical drives */
-        seq_printf(m,"\nLogical Drives:");
+        seq_puts(m, "\nLogical Drives:");
         flag = FALSE;
 
         buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr);
@@ -411,10 +411,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
         gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
         
         if (!flag)
-            seq_printf(m, "\n --\n");
+            seq_puts(m, "\n --\n");
 
         /* 4. about array drives */
-        seq_printf(m,"\nArray Drives:");
+        seq_puts(m, "\nArray Drives:");
         flag = FALSE;
 
         buf = gdth_ioctl_alloc(ha, GDTH_SCRATCH, FALSE, &paddr);
@@ -471,10 +471,10 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
         gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
         
         if (!flag)
-            seq_printf(m, "\n --\n");
+            seq_puts(m, "\n --\n");
 
         /* 5. about host drives */
-        seq_printf(m,"\nHost Drives:");
+        seq_puts(m, "\nHost Drives:");
         flag = FALSE;
 
         buf = gdth_ioctl_alloc(ha, sizeof(gdth_hget_str), FALSE, &paddr);
@@ -527,11 +527,11 @@ int gdth_show_info(struct seq_file *m, struct Scsi_Host *host)
         }
         
         if (!flag)
-            seq_printf(m, "\n --\n");
+            seq_puts(m, "\n --\n");
     }
 
     /* controller events */
-    seq_printf(m,"\nController Events:\n");
+    seq_puts(m, "\nController Events:\n");
 
     for (id = -1;;) {
         id = gdth_read_event(ha, id, estr);

drivers/scsi/hpsa.c

@@ -50,6 +50,7 @@
 #include <linux/jiffies.h>
 #include <linux/percpu-defs.h>
 #include <linux/percpu.h>
+#include <asm/unaligned.h>
 #include <asm/div64.h>
 #include "hpsa_cmd.h"
 #include "hpsa.h"
@@ -59,8 +60,11 @@
 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
 #define HPSA "hpsa"
 
-/* How long to wait (in milliseconds) for board to go into simple mode */
-#define MAX_CONFIG_WAIT 30000
+/* How long to wait for CISS doorbell communication */
+#define CLEAR_EVENT_WAIT_INTERVAL 20	/* ms for each msleep() call */
+#define MODE_CHANGE_WAIT_INTERVAL 10	/* ms for each msleep() call */
+#define MAX_CLEAR_EVENT_WAIT 30000	/* times 20 ms = 600 s */
+#define MAX_MODE_CHANGE_WAIT 2000	/* times 10 ms = 20 s */
 #define MAX_IOCTL_CONFIG_WAIT 1000
 
 /*define how many times we will try a command because of bus resets */
@@ -164,24 +168,24 @@ static struct board_type products[] = {
 	{0x1926103C, "Smart Array P731m", &SA5_access},
 	{0x1928103C, "Smart Array P230i", &SA5_access},
 	{0x1929103C, "Smart Array P530", &SA5_access},
-	{0x21BD103C, "Smart Array", &SA5_access},
-	{0x21BE103C, "Smart Array", &SA5_access},
-	{0x21BF103C, "Smart Array", &SA5_access},
-	{0x21C0103C, "Smart Array", &SA5_access},
-	{0x21C1103C, "Smart Array", &SA5_access},
-	{0x21C2103C, "Smart Array", &SA5_access},
-	{0x21C3103C, "Smart Array", &SA5_access},
+	{0x21BD103C, "Smart Array P244br", &SA5_access},
+	{0x21BE103C, "Smart Array P741m", &SA5_access},
+	{0x21BF103C, "Smart HBA H240ar", &SA5_access},
+	{0x21C0103C, "Smart Array P440ar", &SA5_access},
+	{0x21C1103C, "Smart Array P840ar", &SA5_access},
+	{0x21C2103C, "Smart Array P440", &SA5_access},
+	{0x21C3103C, "Smart Array P441", &SA5_access},
 	{0x21C4103C, "Smart Array", &SA5_access},
-	{0x21C5103C, "Smart Array", &SA5_access},
-	{0x21C6103C, "Smart Array", &SA5_access},
-	{0x21C7103C, "Smart Array", &SA5_access},
-	{0x21C8103C, "Smart Array", &SA5_access},
+	{0x21C5103C, "Smart Array P841", &SA5_access},
+	{0x21C6103C, "Smart HBA H244br", &SA5_access},
+	{0x21C7103C, "Smart HBA H240", &SA5_access},
+	{0x21C8103C, "Smart HBA H241", &SA5_access},
 	{0x21C9103C, "Smart Array", &SA5_access},
-	{0x21CA103C, "Smart Array", &SA5_access},
-	{0x21CB103C, "Smart Array", &SA5_access},
+	{0x21CA103C, "Smart Array P246br", &SA5_access},
+	{0x21CB103C, "Smart Array P840", &SA5_access},
 	{0x21CC103C, "Smart Array", &SA5_access},
 	{0x21CD103C, "Smart Array", &SA5_access},
-	{0x21CE103C, "Smart Array", &SA5_access},
+	{0x21CE103C, "Smart HBA", &SA5_access},
 	{0x00761590, "HP Storage P1224 Array Controller", &SA5_access},
 	{0x00871590, "HP Storage P1224e Array Controller", &SA5_access},
 	{0x007D1590, "HP Storage P1228 Array Controller", &SA5_access},
@@ -195,8 +199,6 @@ static int number_of_controllers;
 static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
 static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
 static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
-static void lock_and_start_io(struct ctlr_info *h);
-static void start_io(struct ctlr_info *h, unsigned long *flags);
 
 #ifdef CONFIG_COMPAT
 static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd,
@@ -204,18 +206,18 @@ static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd,
 #endif
 
 static void cmd_free(struct ctlr_info *h, struct CommandList *c);
-static void cmd_special_free(struct ctlr_info *h, struct CommandList *c);
 static struct CommandList *cmd_alloc(struct ctlr_info *h);
-static struct CommandList *cmd_special_alloc(struct ctlr_info *h);
 static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
 	int cmd_type);
+static void hpsa_free_cmd_pool(struct ctlr_info *h);
 #define VPD_PAGE (1 << 8)
 
 static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static void hpsa_scan_start(struct Scsi_Host *);
 static int hpsa_scan_finished(struct Scsi_Host *sh,
 	unsigned long elapsed_time);
+static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
 
 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
 static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd);
@@ -229,7 +231,7 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
 	struct CommandList *c);
 /* performant mode helper functions */
 static void calc_bucket_map(int *bucket, int num_buckets,
-	int nsgs, int min_blocks, int *bucket_map);
+	int nsgs, int min_blocks, u32 *bucket_map);
 static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
 static inline u32 next_command(struct ctlr_info *h, u8 q);
 static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
@@ -241,14 +243,15 @@ static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
 static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr,
 				     int wait_for_ready);
 static inline void finish_cmd(struct CommandList *c);
-static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h);
+static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h);
 #define BOARD_NOT_READY 0
 #define BOARD_READY 1
 static void hpsa_drain_accel_commands(struct ctlr_info *h);
 static void hpsa_flush_cache(struct ctlr_info *h);
 static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
 	struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
-	u8 *scsi3addr);
+	u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk);
+static void hpsa_command_resubmit_worker(struct work_struct *work);
 
 static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
 {
@@ -505,8 +508,8 @@ static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
 	return (scsi3addr[3] & 0xC0) == 0x40;
 }
 
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
-	"1(ADM)", "UNKNOWN"
+static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
+	"1(+0)ADM", "UNKNOWN"
 };
 #define HPSA_RAID_0	0
 #define HPSA_RAID_4	1
@@ -671,7 +674,7 @@ static struct scsi_host_template hpsa_driver_template = {
 	.queuecommand		= hpsa_scsi_queue_command,
 	.scan_start		= hpsa_scan_start,
 	.scan_finished		= hpsa_scan_finished,
-	.change_queue_depth	= scsi_change_queue_depth,
+	.change_queue_depth	= hpsa_change_queue_depth,
 	.this_id		= -1,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_abort_handler	= hpsa_eh_abort_handler,
@@ -688,13 +691,6 @@ static struct scsi_host_template hpsa_driver_template = {
 	.no_write_same = 1,
 };
 
-
-/* Enqueuing and dequeuing functions for cmdlists. */
-static inline void addQ(struct list_head *list, struct CommandList *c)
-{
-	list_add_tail(&c->list, list);
-}
-
 static inline u32 next_command(struct ctlr_info *h, u8 q)
 {
 	u32 a;
@@ -828,31 +824,21 @@ static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
 static void enqueue_cmd_and_start_io(struct ctlr_info *h,
 	struct CommandList *c)
 {
-	unsigned long flags;
-
+	dial_down_lockup_detection_during_fw_flash(h, c);
+	atomic_inc(&h->commands_outstanding);
 	switch (c->cmd_type) {
 	case CMD_IOACCEL1:
 		set_ioaccel1_performant_mode(h, c);
+		writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 		break;
 	case CMD_IOACCEL2:
 		set_ioaccel2_performant_mode(h, c);
+		writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
 		break;
 	default:
 		set_performant_mode(h, c);
+		h->access.submit_command(h, c);
 	}
-	dial_down_lockup_detection_during_fw_flash(h, c);
-	spin_lock_irqsave(&h->lock, flags);
-	addQ(&h->reqQ, c);
-	h->Qdepth++;
-	start_io(h, &flags);
-	spin_unlock_irqrestore(&h->lock, flags);
-}
-
-static inline void removeQ(struct CommandList *c)
-{
-	if (WARN_ON(list_empty(&c->list)))
-		return;
-	list_del_init(&c->list);
 }
 
 static inline int is_hba_lunid(unsigned char scsi3addr[])
@@ -919,7 +905,7 @@ static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
 
 	/* If this device a non-zero lun of a multi-lun device
 	 * byte 4 of the 8-byte LUN addr will contain the logical
-	 * unit no, zero otherise.
+	 * unit no, zero otherwise.
 	 */
 	if (device->scsi3addr[4] == 0) {
 		/* This is not a non-zero lun of a multi-lun device */
@@ -984,12 +970,24 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
 	/* Raid level changed. */
 	h->dev[entry]->raid_level = new_entry->raid_level;
 
-	/* Raid offload parameters changed. */
+	/* Raid offload parameters changed.  Careful about the ordering. */
+	if (new_entry->offload_config && new_entry->offload_enabled) {
+		/*
+		 * if drive is newly offload_enabled, we want to copy the
+		 * raid map data first.  If previously offload_enabled and
+		 * offload_config were set, raid map data had better be
+		 * the same as it was before.  if raid map data is changed
+		 * then it had better be the case that
+		 * h->dev[entry]->offload_enabled is currently 0.
+		 */
+		h->dev[entry]->raid_map = new_entry->raid_map;
+		h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+		wmb(); /* ensure raid map updated prior to ->offload_enabled */
+	}
 	h->dev[entry]->offload_config = new_entry->offload_config;
-	h->dev[entry]->offload_enabled = new_entry->offload_enabled;
-	h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
 	h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
-	h->dev[entry]->raid_map = new_entry->raid_map;
+	h->dev[entry]->offload_enabled = new_entry->offload_enabled;
+	h->dev[entry]->queue_depth = new_entry->queue_depth;
 
 	dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d updated.\n",
 		scsi_device_type(new_entry->devtype), hostno, new_entry->bus,
@@ -1115,6 +1113,8 @@ static inline int device_updated(struct hpsa_scsi_dev_t *dev1,
 		return 1;
 	if (dev1->offload_enabled != dev2->offload_enabled)
 		return 1;
+	if (dev1->queue_depth != dev2->queue_depth)
+		return 1;
 	return 0;
 }
 
@@ -1260,6 +1260,85 @@ static void hpsa_show_volume_status(struct ctlr_info *h,
 	}
 }
 
+/*
+ * Figure the list of physical drive pointers for a logical drive with
+ * raid offload configured.
+ */
+static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
+				struct hpsa_scsi_dev_t *dev[], int ndevices,
+				struct hpsa_scsi_dev_t *logical_drive)
+{
+	struct raid_map_data *map = &logical_drive->raid_map;
+	struct raid_map_disk_data *dd = &map->data[0];
+	int i, j;
+	int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
+				le16_to_cpu(map->metadata_disks_per_row);
+	int nraid_map_entries = le16_to_cpu(map->row_cnt) *
+				le16_to_cpu(map->layout_map_count) *
+				total_disks_per_row;
+	int nphys_disk = le16_to_cpu(map->layout_map_count) *
+				total_disks_per_row;
+	int qdepth;
+
+	if (nraid_map_entries > RAID_MAP_MAX_ENTRIES)
+		nraid_map_entries = RAID_MAP_MAX_ENTRIES;
+
+	qdepth = 0;
+	for (i = 0; i < nraid_map_entries; i++) {
+		logical_drive->phys_disk[i] = NULL;
+		if (!logical_drive->offload_config)
+			continue;
+		for (j = 0; j < ndevices; j++) {
+			if (dev[j]->devtype != TYPE_DISK)
+				continue;
+			if (is_logical_dev_addr_mode(dev[j]->scsi3addr))
+				continue;
+			if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
+				continue;
+
+			logical_drive->phys_disk[i] = dev[j];
+			if (i < nphys_disk)
+				qdepth = min(h->nr_cmds, qdepth +
+				    logical_drive->phys_disk[i]->queue_depth);
+			break;
+		}
+
+		/*
+		 * This can happen if a physical drive is removed and
+		 * the logical drive is degraded.  In that case, the RAID
+		 * map data will refer to a physical disk which isn't actually
+		 * present.  And in that case offload_enabled should already
+		 * be 0, but we'll turn it off here just in case
+		 */
+		if (!logical_drive->phys_disk[i]) {
+			logical_drive->offload_enabled = 0;
+			logical_drive->queue_depth = h->nr_cmds;
+		}
+	}
+	if (nraid_map_entries)
+		/*
+		 * This is correct for reads, too high for full stripe writes,
+		 * way too high for partial stripe writes
+		 */
+		logical_drive->queue_depth = qdepth;
+	else
+		logical_drive->queue_depth = h->nr_cmds;
+}
+
+static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
+				struct hpsa_scsi_dev_t *dev[], int ndevices)
+{
+	int i;
+
+	for (i = 0; i < ndevices; i++) {
+		if (dev[i]->devtype != TYPE_DISK)
+			continue;
+		if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
+			continue;
+		hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
+	}
+}
+
 static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
 	struct hpsa_scsi_dev_t *sd[], int nsds)
 {
@@ -1444,8 +1523,12 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
 	spin_lock_irqsave(&h->devlock, flags);
 	sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
 		sdev_id(sdev), sdev->lun);
-	if (sd != NULL)
+	if (sd != NULL) {
 		sdev->hostdata = sd;
+		if (sd->queue_depth)
+			scsi_change_queue_depth(sdev, sd->queue_depth);
+		atomic_set(&sd->ioaccel_cmds_out, 0);
+	}
 	spin_unlock_irqrestore(&h->devlock, flags);
 	return 0;
 }
@@ -1478,13 +1561,17 @@ static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h)
 
 	h->cmd_sg_list = kzalloc(sizeof(*h->cmd_sg_list) * h->nr_cmds,
 				GFP_KERNEL);
-	if (!h->cmd_sg_list)
+	if (!h->cmd_sg_list) {
+		dev_err(&h->pdev->dev, "Failed to allocate SG list\n");
 		return -ENOMEM;
+	}
 	for (i = 0; i < h->nr_cmds; i++) {
 		h->cmd_sg_list[i] = kmalloc(sizeof(*h->cmd_sg_list[i]) *
 						h->chainsize, GFP_KERNEL);
-		if (!h->cmd_sg_list[i])
+		if (!h->cmd_sg_list[i]) {
+			dev_err(&h->pdev->dev, "Failed to allocate cmd SG\n");
 			goto clean;
+		}
 	}
 	return 0;
 
@@ -1504,7 +1591,7 @@ static int hpsa_map_sg_chain_block(struct ctlr_info *h,
 	chain_block = h->cmd_sg_list[c->cmdindex];
 	chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN);
 	chain_len = sizeof(*chain_sg) *
-		(c->Header.SGTotal - h->max_cmd_sg_entries);
+		(le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries);
 	chain_sg->Len = cpu_to_le32(chain_len);
 	temp64 = pci_map_single(h->pdev, chain_block, chain_len,
 				PCI_DMA_TODEVICE);
@@ -1635,7 +1722,6 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 		struct hpsa_scsi_dev_t *dev)
 {
 	struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
-	int raid_retry = 0;
 
 	/* check for good status */
 	if (likely(c2->error_data.serv_response == 0 &&
@@ -1652,26 +1738,22 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 	if (is_logical_dev_addr_mode(dev->scsi3addr) &&
 		c2->error_data.serv_response ==
 			IOACCEL2_SERV_RESPONSE_FAILURE) {
-		dev->offload_enabled = 0;
-		h->drv_req_rescan = 1;	/* schedule controller for a rescan */
-		cmd->result = DID_SOFT_ERROR << 16;
-		cmd_free(h, c);
-		cmd->scsi_done(cmd);
-		return;
-	}
-	raid_retry = handle_ioaccel_mode2_error(h, c, cmd, c2);
-	/* If error found, disable Smart Path, schedule a rescan,
-	 * and force a retry on the standard path.
-	 */
-	if (raid_retry) {
-		dev_warn(&h->pdev->dev, "%s: Retrying on standard path.\n",
-			"HP SSD Smart Path");
-		dev->offload_enabled = 0; /* Disable Smart Path */
-		h->drv_req_rescan = 1;	  /* schedule controller rescan */
-		cmd->result = DID_SOFT_ERROR << 16;
+		if (c2->error_data.status ==
+			IOACCEL2_STATUS_SR_IOACCEL_DISABLED)
+			dev->offload_enabled = 0;
+		goto retry_cmd;
 	}
+
+	if (handle_ioaccel_mode2_error(h, c, cmd, c2))
+		goto retry_cmd;
+
 	cmd_free(h, c);
 	cmd->scsi_done(cmd);
+	return;
+
+retry_cmd:
+	INIT_WORK(&c->work, hpsa_command_resubmit_worker);
+	queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
 }
 
 static void complete_scsi_command(struct CommandList *cp)
@@ -1687,18 +1769,21 @@ static void complete_scsi_command(struct CommandList *cp)
 	unsigned long sense_data_size;
 
 	ei = cp->err_info;
-	cmd = (struct scsi_cmnd *) cp->scsi_cmd;
+	cmd = cp->scsi_cmd;
 	h = cp->h;
 	dev = cmd->device->hostdata;
 
 	scsi_dma_unmap(cmd); /* undo the DMA mappings */
 	if ((cp->cmd_type == CMD_SCSI) &&
-		(cp->Header.SGTotal > h->max_cmd_sg_entries))
+		(le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries))
 		hpsa_unmap_sg_chain_block(h, cp);
 
 	cmd->result = (DID_OK << 16); 		/* host byte */
 	cmd->result |= (COMMAND_COMPLETE << 8);	/* msg byte */
 
+	if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1)
+		atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
+
 	if (cp->cmd_type == CMD_IOACCEL2)
 		return process_ioaccel2_completion(h, cp, cmd, dev);
 
@@ -1706,6 +1791,8 @@ static void complete_scsi_command(struct CommandList *cp)
 
 	scsi_set_resid(cmd, ei->ResidualCnt);
 	if (ei->CommandStatus == 0) {
+		if (cp->cmd_type == CMD_IOACCEL1)
+			atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
 		cmd_free(h, cp);
 		cmd->scsi_done(cmd);
 		return;
@@ -1726,8 +1813,10 @@ static void complete_scsi_command(struct CommandList *cp)
 	 */
 	if (cp->cmd_type == CMD_IOACCEL1) {
 		struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex];
-		cp->Header.SGList = cp->Header.SGTotal = scsi_sg_count(cmd);
-		cp->Request.CDBLen = c->io_flags & IOACCEL1_IOFLAGS_CDBLEN_MASK;
+		cp->Header.SGList = scsi_sg_count(cmd);
+		cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList);
+		cp->Request.CDBLen = le16_to_cpu(c->io_flags) &
+			IOACCEL1_IOFLAGS_CDBLEN_MASK;
 		cp->Header.tag = c->tag;
 		memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8);
 		memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen);
@@ -1739,9 +1828,9 @@ static void complete_scsi_command(struct CommandList *cp)
 		if (is_logical_dev_addr_mode(dev->scsi3addr)) {
 			if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
 				dev->offload_enabled = 0;
-			cmd->result = DID_SOFT_ERROR << 16;
-			cmd_free(h, cp);
-			cmd->scsi_done(cmd);
+			INIT_WORK(&cp->work, hpsa_command_resubmit_worker);
+			queue_work_on(raw_smp_processor_id(),
+					h->resubmit_wq, &cp->work);
 			return;
 		}
 	}
@@ -1798,9 +1887,8 @@ static void complete_scsi_command(struct CommandList *cp)
 	case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
 		break;
 	case CMD_DATA_OVERRUN:
-		dev_warn(&h->pdev->dev, "cp %p has"
-			" completed with data overrun "
-			"reported\n", cp);
+		dev_warn(&h->pdev->dev,
+			"CDB %16phN data overrun\n", cp->Request.CDB);
 		break;
 	case CMD_INVALID: {
 		/* print_bytes(cp, sizeof(*cp), 1, 0);
@@ -1816,34 +1904,38 @@ static void complete_scsi_command(struct CommandList *cp)
 		break;
 	case CMD_PROTOCOL_ERR:
 		cmd->result = DID_ERROR << 16;
-		dev_warn(&h->pdev->dev, "cp %p has "
-			"protocol error\n", cp);
+		dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n",
+				cp->Request.CDB);
 		break;
 	case CMD_HARDWARE_ERR:
 		cmd->result = DID_ERROR << 16;
-		dev_warn(&h->pdev->dev, "cp %p had  hardware error\n", cp);
+		dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n",
+			cp->Request.CDB);
 		break;
 	case CMD_CONNECTION_LOST:
 		cmd->result = DID_ERROR << 16;
-		dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp);
+		dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n",
+			cp->Request.CDB);
 		break;
 	case CMD_ABORTED:
 		cmd->result = DID_ABORT << 16;
-		dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n",
-				cp, ei->ScsiStatus);
+		dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n",
+				cp->Request.CDB, ei->ScsiStatus);
 		break;
 	case CMD_ABORT_FAILED:
 		cmd->result = DID_ERROR << 16;
-		dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp);
+		dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n",
+			cp->Request.CDB);
 		break;
 	case CMD_UNSOLICITED_ABORT:
 		cmd->result = DID_SOFT_ERROR << 16; /* retry the command */
-		dev_warn(&h->pdev->dev, "cp %p aborted due to an unsolicited "
-			"abort\n", cp);
+		dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n",
+			cp->Request.CDB);
 		break;
 	case CMD_TIMEOUT:
 		cmd->result = DID_TIME_OUT << 16;
-		dev_warn(&h->pdev->dev, "cp %p timedout\n", cp);
+		dev_warn(&h->pdev->dev, "CDB %16phN timed out\n",
+			cp->Request.CDB);
 		break;
 	case CMD_UNABORTABLE:
 		cmd->result = DID_ERROR << 16;
@@ -2048,10 +2140,10 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
 	struct CommandList *c;
 	struct ErrorInfo *ei;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 
-	if (c == NULL) {			/* trouble... */
-		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+	if (c == NULL) {
+		dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		return -ENOMEM;
 	}
 
@@ -2067,7 +2159,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
 		rc = -1;
 	}
 out:
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 	return rc;
 }
 
@@ -2079,10 +2171,9 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
 	struct CommandList *c;
 	struct ErrorInfo *ei;
 
-	c = cmd_special_alloc(h);
-
+	c = cmd_alloc(h);
 	if (c == NULL) {			/* trouble... */
-		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		return -ENOMEM;
 	}
 
@@ -2098,7 +2189,7 @@ static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
 		rc = -1;
 	}
 out:
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 	return rc;
 	}
 
@@ -2109,10 +2200,10 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
 	struct CommandList *c;
 	struct ErrorInfo *ei;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 
 	if (c == NULL) {			/* trouble... */
-		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		return -ENOMEM;
 	}
 
@@ -2128,7 +2219,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
 		hpsa_scsi_interpret_error(h, c);
 		rc = -1;
 	}
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 	return rc;
 }
 
@@ -2191,15 +2282,13 @@ static void hpsa_debug_map_buff(struct ctlr_info *h, int rc,
 			le16_to_cpu(map_buff->row_cnt));
 	dev_info(&h->pdev->dev, "layout_map_count = %u\n",
 			le16_to_cpu(map_buff->layout_map_count));
-	dev_info(&h->pdev->dev, "flags = %u\n",
+	dev_info(&h->pdev->dev, "flags = 0x%x\n",
 			le16_to_cpu(map_buff->flags));
-	if (map_buff->flags & RAID_MAP_FLAG_ENCRYPT_ON)
-		dev_info(&h->pdev->dev, "encrypytion = ON\n");
-	else
-		dev_info(&h->pdev->dev, "encrypytion = OFF\n");
+	dev_info(&h->pdev->dev, "encrypytion = %s\n",
+			le16_to_cpu(map_buff->flags) &
+			RAID_MAP_FLAG_ENCRYPT_ON ?  "ON" : "OFF");
 	dev_info(&h->pdev->dev, "dekindex = %u\n",
 			le16_to_cpu(map_buff->dekindex));
-
 	map_cnt = le16_to_cpu(map_buff->layout_map_count);
 	for (map = 0; map < map_cnt; map++) {
 		dev_info(&h->pdev->dev, "Map%u:\n", map);
@@ -2238,26 +2327,26 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
 	struct CommandList *c;
 	struct ErrorInfo *ei;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (c == NULL) {
-		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		return -ENOMEM;
 	}
 	if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map,
 			sizeof(this_device->raid_map), 0,
 			scsi3addr, TYPE_CMD)) {
 		dev_warn(&h->pdev->dev, "Out of memory in hpsa_get_raid_map()\n");
-		cmd_special_free(h, c);
+		cmd_free(h, c);
 		return -ENOMEM;
 	}
 	hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
 	ei = c->err_info;
 	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
 		hpsa_scsi_interpret_error(h, c);
-		cmd_special_free(h, c);
+		cmd_free(h, c);
 		return -1;
 	}
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 
 	/* @todo in the future, dynamically allocate RAID map memory */
 	if (le32_to_cpu(this_device->raid_map.structure_size) >
@@ -2269,6 +2358,34 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
 	return rc;
 }
 
+static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
+		unsigned char scsi3addr[], u16 bmic_device_index,
+		struct bmic_identify_physical_device *buf, size_t bufsize)
+{
+	int rc = IO_OK;
+	struct CommandList *c;
+	struct ErrorInfo *ei;
+
+	c = cmd_alloc(h);
+	rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize,
+		0, RAID_CTLR_LUNID, TYPE_CMD);
+	if (rc)
+		goto out;
+
+	c->Request.CDB[2] = bmic_device_index & 0xff;
+	c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
+
+	hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+	ei = c->err_info;
+	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+		hpsa_scsi_interpret_error(h, c);
+		rc = -1;
+	}
+out:
+	cmd_free(h, c);
+	return rc;
+}
+
 static int hpsa_vpd_page_supported(struct ctlr_info *h,
 	unsigned char scsi3addr[], u8 page)
 {
@@ -2369,7 +2486,7 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
 }
 
 static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
-		struct ReportLUNdata *buf, int bufsize,
+		void *buf, int bufsize,
 		int extended_response)
 {
 	int rc = IO_OK;
@@ -2377,9 +2494,9 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
 	unsigned char scsi3addr[8];
 	struct ErrorInfo *ei;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (c == NULL) {			/* trouble... */
-		dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		return -1;
 	}
 	/* address the controller */
@@ -2398,24 +2515,26 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
 		hpsa_scsi_interpret_error(h, c);
 		rc = -1;
 	} else {
-		if (buf->extended_response_flag != extended_response) {
+		struct ReportLUNdata *rld = buf;
+
+		if (rld->extended_response_flag != extended_response) {
 			dev_err(&h->pdev->dev,
 				"report luns requested format %u, got %u\n",
 				extended_response,
-				buf->extended_response_flag);
+				rld->extended_response_flag);
 			rc = -1;
 		}
 	}
 out:
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 	return rc;
 }
 
 static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
-		struct ReportLUNdata *buf,
-		int bufsize, int extended_response)
+		struct ReportExtendedLUNdata *buf, int bufsize)
 {
-	return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response);
+	return hpsa_scsi_do_report_luns(h, 0, buf, bufsize,
+						HPSA_REPORT_PHYS_EXTENDED);
 }
 
 static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h,
@@ -2590,6 +2709,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 		this_device->offload_config = 0;
 		this_device->offload_enabled = 0;
 		this_device->volume_offline = 0;
+		this_device->queue_depth = h->nr_cmds;
 	}
 
 	if (is_OBDR_device) {
@@ -2732,7 +2852,6 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
 {
 	struct ReportExtendedLUNdata *physicals = NULL;
 	int responsesize = 24;	/* size of physical extended response */
-	int extended = 2;	/* flag forces reporting 'other dev info'. */
 	int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize;
 	u32 nphysicals = 0;	/* number of reported physical devs */
 	int found = 0;		/* found match (1) or not (0) */
@@ -2741,8 +2860,8 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
 	struct scsi_cmnd *scmd;	/* scsi command within request being aborted */
 	struct hpsa_scsi_dev_t *d; /* device of request being aborted */
 	struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */
-	u32 it_nexus;		/* 4 byte device handle for the ioaccel2 cmd */
-	u32 scsi_nexus;		/* 4 byte device handle for the ioaccel2 cmd */
+	__le32 it_nexus;	/* 4 byte device handle for the ioaccel2 cmd */
+	__le32 scsi_nexus;	/* 4 byte device handle for the ioaccel2 cmd */
 
 	if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2)
 		return 0; /* no match */
@@ -2761,8 +2880,8 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
 		return 0; /* no match */
 
 	it_nexus = cpu_to_le32(d->ioaccel_handle);
-	scsi_nexus = cpu_to_le32(c2a->scsi_nexus);
-	find = c2a->scsi_nexus;
+	scsi_nexus = c2a->scsi_nexus;
+	find = le32_to_cpu(c2a->scsi_nexus);
 
 	if (h->raid_offload_debug > 0)
 		dev_info(&h->pdev->dev,
@@ -2779,8 +2898,7 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
 	physicals = kzalloc(reportsize, GFP_KERNEL);
 	if (physicals == NULL)
 		return 0;
-	if (hpsa_scsi_do_report_phys_luns(h, (struct ReportLUNdata *) physicals,
-		reportsize, extended)) {
+	if (hpsa_scsi_do_report_phys_luns(h, physicals, reportsize)) {
 		dev_err(&h->pdev->dev,
 			"Can't lookup %s device handle: report physical LUNs failed.\n",
 			"HP SSD Smart Path");
@@ -2821,34 +2939,20 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
  * Returns 0 on success, -1 otherwise.
  */
 static int hpsa_gather_lun_info(struct ctlr_info *h,
-	int reportphyslunsize, int reportloglunsize,
-	struct ReportLUNdata *physdev, u32 *nphysicals, int *physical_mode,
+	struct ReportExtendedLUNdata *physdev, u32 *nphysicals,
 	struct ReportLUNdata *logdev, u32 *nlogicals)
 {
-	int physical_entry_size = 8;
-
-	*physical_mode = 0;
-
-	/* For I/O accelerator mode we need to read physical device handles */
-	if (h->transMethod & CFGTBL_Trans_io_accel1 ||
-		h->transMethod & CFGTBL_Trans_io_accel2) {
-		*physical_mode = HPSA_REPORT_PHYS_EXTENDED;
-		physical_entry_size = 24;
-	}
-	if (hpsa_scsi_do_report_phys_luns(h, physdev, reportphyslunsize,
-							*physical_mode)) {
+	if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
 		dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
 		return -1;
 	}
-	*nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) /
-							physical_entry_size;
+	*nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24;
 	if (*nphysicals > HPSA_MAX_PHYS_LUN) {
-		dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded."
-			"  %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
-			*nphysicals - HPSA_MAX_PHYS_LUN);
+		dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n",
+			HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN);
 		*nphysicals = HPSA_MAX_PHYS_LUN;
 	}
-	if (hpsa_scsi_do_report_log_luns(h, logdev, reportloglunsize)) {
+	if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) {
 		dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
 		return -1;
 	}
@@ -2921,6 +3025,33 @@ static int hpsa_hba_mode_enabled(struct ctlr_info *h)
 	return hba_mode_enabled;
 }
 
+/* get physical drive ioaccel handle and queue depth */
+static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
+		struct hpsa_scsi_dev_t *dev,
+		u8 *lunaddrbytes,
+		struct bmic_identify_physical_device *id_phys)
+{
+	int rc;
+	struct ext_report_lun_entry *rle =
+		(struct ext_report_lun_entry *) lunaddrbytes;
+
+	dev->ioaccel_handle = rle->ioaccel_handle;
+	memset(id_phys, 0, sizeof(*id_phys));
+	rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
+			GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
+			sizeof(*id_phys));
+	if (!rc)
+		/* Reserve space for FW operations */
+#define DRIVE_CMDS_RESERVED_FOR_FW 2
+#define DRIVE_QUEUE_DEPTH 7
+		dev->queue_depth =
+			le16_to_cpu(id_phys->current_queue_depth_limit) -
+				DRIVE_CMDS_RESERVED_FOR_FW;
+	else
+		dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
+	atomic_set(&dev->ioaccel_cmds_out, 0);
+}
+
 static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 {
 	/* the idea here is we could get notified
@@ -2935,9 +3066,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	 */
 	struct ReportExtendedLUNdata *physdev_list = NULL;
 	struct ReportLUNdata *logdev_list = NULL;
+	struct bmic_identify_physical_device *id_phys = NULL;
 	u32 nphysicals = 0;
 	u32 nlogicals = 0;
-	int physical_mode = 0;
 	u32 ndev_allocated = 0;
 	struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
 	int ncurrent = 0;
@@ -2950,8 +3081,10 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL);
 	logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
 	tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
+	id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
 
-	if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
+	if (!currentsd || !physdev_list || !logdev_list ||
+		!tmpdevice || !id_phys) {
 		dev_err(&h->pdev->dev, "out of memory\n");
 		goto out;
 	}
@@ -2968,10 +3101,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 
 	h->hba_mode_enabled = rescan_hba_mode;
 
-	if (hpsa_gather_lun_info(h,
-			sizeof(*physdev_list), sizeof(*logdev_list),
-			(struct ReportLUNdata *) physdev_list, &nphysicals,
-			&physical_mode, logdev_list, &nlogicals))
+	if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
+			logdev_list, &nlogicals))
 		goto out;
 
 	/* We might see up to the maximum number of logical and physical disks
@@ -3068,10 +3199,11 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 				ncurrent++;
 				break;
 			}
-			if (physical_mode == HPSA_REPORT_PHYS_EXTENDED) {
-				memcpy(&this_device->ioaccel_handle,
-					&lunaddrbytes[20],
-					sizeof(this_device->ioaccel_handle));
+			if (h->transMethod & CFGTBL_Trans_io_accel1 ||
+				h->transMethod & CFGTBL_Trans_io_accel2) {
+				hpsa_get_ioaccel_drive_info(h, this_device,
+							lunaddrbytes, id_phys);
+				atomic_set(&this_device->ioaccel_cmds_out, 0);
 				ncurrent++;
 			}
 			break;
@@ -3095,6 +3227,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 		if (ncurrent >= HPSA_MAX_DEVICES)
 			break;
 	}
+	hpsa_update_log_drive_phys_drive_ptrs(h, currentsd, ncurrent);
 	adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
 out:
 	kfree(tmpdevice);
@@ -3103,9 +3236,22 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	kfree(currentsd);
 	kfree(physdev_list);
 	kfree(logdev_list);
+	kfree(id_phys);
+}
+
+static void hpsa_set_sg_descriptor(struct SGDescriptor *desc,
+				   struct scatterlist *sg)
+{
+	u64 addr64 = (u64) sg_dma_address(sg);
+	unsigned int len = sg_dma_len(sg);
+
+	desc->Addr = cpu_to_le64(addr64);
+	desc->Len = cpu_to_le32(len);
+	desc->Ext = 0;
 }
 
-/* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
+/*
+ * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
  * dma mapping  and fills in the scatter gather entries of the
  * hpsa command, cp.
  */
@@ -3113,9 +3259,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 		struct CommandList *cp,
 		struct scsi_cmnd *cmd)
 {
-	unsigned int len;
 	struct scatterlist *sg;
-	u64 addr64;
 	int use_sg, i, sg_index, chained;
 	struct SGDescriptor *curr_sg;
 
@@ -3138,13 +3282,11 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 			curr_sg = h->cmd_sg_list[cp->cmdindex];
 			sg_index = 0;
 		}
-		addr64 = (u64) sg_dma_address(sg);
-		len  = sg_dma_len(sg);
-		curr_sg->Addr = cpu_to_le64(addr64);
-		curr_sg->Len = cpu_to_le32(len);
-		curr_sg->Ext = cpu_to_le32(0);
+		hpsa_set_sg_descriptor(curr_sg, sg);
 		curr_sg++;
 	}
+
+	/* Back the pointer up to the last entry and mark it as "last". */
 	(--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);
 
 	if (use_sg + chained > h->maxSG)
@@ -3163,7 +3305,7 @@ static int hpsa_scatter_gather(struct ctlr_info *h,
 sglist_finished:
 
 	cp->Header.SGList = (u8) use_sg;   /* no. SGs contig in this cmd */
-	cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in this cmd list */
+	cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */
 	return 0;
 }
 
@@ -3217,7 +3359,7 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len)
 
 static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
 	struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
-	u8 *scsi3addr)
+	u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
 {
 	struct scsi_cmnd *cmd = c->scsi_cmd;
 	struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
@@ -3230,13 +3372,17 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
 	u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE;
 
 	/* TODO: implement chaining support */
-	if (scsi_sg_count(cmd) > h->ioaccel_maxsg)
+	if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
 		return IO_ACCEL_INELIGIBLE;
+	}
 
 	BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX);
 
-	if (fixup_ioaccel_cdb(cdb, &cdb_len))
+	if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
 		return IO_ACCEL_INELIGIBLE;
+	}
 
 	c->cmd_type = CMD_IOACCEL1;
 
@@ -3246,8 +3392,10 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
 	BUG_ON(c->busaddr & 0x0000007F);
 
 	use_sg = scsi_dma_map(cmd);
-	if (use_sg < 0)
+	if (use_sg < 0) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
 		return use_sg;
+	}
 
 	if (use_sg) {
 		curr_sg = cp->SG;
@@ -3284,11 +3432,11 @@ static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
 
 	c->Header.SGList = use_sg;
 	/* Fill out the command structure to submit */
-	cp->dev_handle = ioaccel_handle & 0xFFFF;
-	cp->transfer_len = total_len;
-	cp->io_flags = IOACCEL1_IOFLAGS_IO_REQ |
-			(cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK);
-	cp->control = control;
+	cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF);
+	cp->transfer_len = cpu_to_le32(total_len);
+	cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ |
+			(cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK));
+	cp->control = cpu_to_le32(control);
 	memcpy(cp->CDB, cdb, cdb_len);
 	memcpy(cp->CISS_LUN, scsi3addr, 8);
 	/* Tag was already set at init time. */
@@ -3306,8 +3454,10 @@ static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h,
 	struct scsi_cmnd *cmd = c->scsi_cmd;
 	struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
 
+	c->phys_disk = dev;
+
 	return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle,
-		cmd->cmnd, cmd->cmd_len, dev->scsi3addr);
+		cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev);
 }
 
 /*
@@ -3321,10 +3471,8 @@ static void set_encrypt_ioaccel2(struct ctlr_info *h,
 	struct raid_map_data *map = &dev->raid_map;
 	u64 first_block;
 
-	BUG_ON(!(dev->offload_config && dev->offload_enabled));
-
 	/* Are we doing encryption on this device */
-	if (!(map->flags & RAID_MAP_FLAG_ENCRYPT_ON))
+	if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON))
 		return;
 	/* Set the data encryption key index. */
 	cp->dekindex = map->dekindex;
@@ -3340,101 +3488,38 @@ static void set_encrypt_ioaccel2(struct ctlr_info *h,
 	/* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */
 	case WRITE_6:
 	case READ_6:
-		if (map->volume_blk_size == 512) {
-			cp->tweak_lower =
-				(((u32) cmd->cmnd[2]) << 8) |
-					cmd->cmnd[3];
-			cp->tweak_upper = 0;
-		} else {
-			first_block =
-				(((u64) cmd->cmnd[2]) << 8) |
-					cmd->cmnd[3];
-			first_block = (first_block * map->volume_blk_size)/512;
-			cp->tweak_lower = (u32)first_block;
-			cp->tweak_upper = (u32)(first_block >> 32);
-		}
+		first_block = get_unaligned_be16(&cmd->cmnd[2]);
 		break;
 	case WRITE_10:
 	case READ_10:
-		if (map->volume_blk_size == 512) {
-			cp->tweak_lower =
-				(((u32) cmd->cmnd[2]) << 24) |
-				(((u32) cmd->cmnd[3]) << 16) |
-				(((u32) cmd->cmnd[4]) << 8) |
-					cmd->cmnd[5];
-			cp->tweak_upper = 0;
-		} else {
-			first_block =
-				(((u64) cmd->cmnd[2]) << 24) |
-				(((u64) cmd->cmnd[3]) << 16) |
-				(((u64) cmd->cmnd[4]) << 8) |
-					cmd->cmnd[5];
-			first_block = (first_block * map->volume_blk_size)/512;
-			cp->tweak_lower = (u32)first_block;
-			cp->tweak_upper = (u32)(first_block >> 32);
-		}
-		break;
 	/* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */
 	case WRITE_12:
 	case READ_12:
-		if (map->volume_blk_size == 512) {
-			cp->tweak_lower =
-				(((u32) cmd->cmnd[2]) << 24) |
-				(((u32) cmd->cmnd[3]) << 16) |
-				(((u32) cmd->cmnd[4]) << 8) |
-					cmd->cmnd[5];
-			cp->tweak_upper = 0;
-		} else {
-			first_block =
-				(((u64) cmd->cmnd[2]) << 24) |
-				(((u64) cmd->cmnd[3]) << 16) |
-				(((u64) cmd->cmnd[4]) << 8) |
-					cmd->cmnd[5];
-			first_block = (first_block * map->volume_blk_size)/512;
-			cp->tweak_lower = (u32)first_block;
-			cp->tweak_upper = (u32)(first_block >> 32);
-		}
+		first_block = get_unaligned_be32(&cmd->cmnd[2]);
 		break;
 	case WRITE_16:
 	case READ_16:
-		if (map->volume_blk_size == 512) {
-			cp->tweak_lower =
-				(((u32) cmd->cmnd[6]) << 24) |
-				(((u32) cmd->cmnd[7]) << 16) |
-				(((u32) cmd->cmnd[8]) << 8) |
-					cmd->cmnd[9];
-			cp->tweak_upper =
-				(((u32) cmd->cmnd[2]) << 24) |
-				(((u32) cmd->cmnd[3]) << 16) |
-				(((u32) cmd->cmnd[4]) << 8) |
-					cmd->cmnd[5];
-		} else {
-			first_block =
-				(((u64) cmd->cmnd[2]) << 56) |
-				(((u64) cmd->cmnd[3]) << 48) |
-				(((u64) cmd->cmnd[4]) << 40) |
-				(((u64) cmd->cmnd[5]) << 32) |
-				(((u64) cmd->cmnd[6]) << 24) |
-				(((u64) cmd->cmnd[7]) << 16) |
-				(((u64) cmd->cmnd[8]) << 8) |
-					cmd->cmnd[9];
-			first_block = (first_block * map->volume_blk_size)/512;
-			cp->tweak_lower = (u32)first_block;
-			cp->tweak_upper = (u32)(first_block >> 32);
-		}
+		first_block = get_unaligned_be64(&cmd->cmnd[2]);
 		break;
 	default:
 		dev_err(&h->pdev->dev,
-			"ERROR: %s: IOACCEL request CDB size not supported for encryption\n",
-			__func__);
+			"ERROR: %s: size (0x%x) not supported for encryption\n",
+			__func__, cmd->cmnd[0]);
 		BUG();
 		break;
 	}
+
+	if (le32_to_cpu(map->volume_blk_size) != 512)
+		first_block = first_block *
+				le32_to_cpu(map->volume_blk_size)/512;
+
+	cp->tweak_lower = cpu_to_le32(first_block);
+	cp->tweak_upper = cpu_to_le32(first_block >> 32);
 }
 
 static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 	struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
-	u8 *scsi3addr)
+	u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
 {
 	struct scsi_cmnd *cmd = c->scsi_cmd;
 	struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
@@ -3445,11 +3530,16 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 	u32 len;
 	u32 total_len = 0;
 
-	if (scsi_sg_count(cmd) > h->ioaccel_maxsg)
+	if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
 		return IO_ACCEL_INELIGIBLE;
+	}
 
-	if (fixup_ioaccel_cdb(cdb, &cdb_len))
+	if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
 		return IO_ACCEL_INELIGIBLE;
+	}
+
 	c->cmd_type = CMD_IOACCEL2;
 	/* Adjust the DMA address to point to the accelerated command buffer */
 	c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
@@ -3460,8 +3550,10 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 	cp->IU_type = IOACCEL2_IU_TYPE;
 
 	use_sg = scsi_dma_map(cmd);
-	if (use_sg < 0)
+	if (use_sg < 0) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
 		return use_sg;
+	}
 
 	if (use_sg) {
 		BUG_ON(use_sg > IOACCEL2_MAXSGENTRIES);
@@ -3506,9 +3598,8 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
 	/* Set encryption parameters, if necessary */
 	set_encrypt_ioaccel2(h, c, cp);
 
-	cp->scsi_nexus = ioaccel_handle;
-	cp->Tag = (c->cmdindex << DIRECT_LOOKUP_SHIFT) |
-				DIRECT_LOOKUP_BIT;
+	cp->scsi_nexus = cpu_to_le32(ioaccel_handle);
+	cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT);
 	memcpy(cp->cdb, cdb, sizeof(cp->cdb));
 
 	/* fill in sg elements */
@@ -3528,14 +3619,22 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
  */
 static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
 	struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
-	u8 *scsi3addr)
+	u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
 {
+	/* Try to honor the device's queue depth */
+	if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) >
+					phys_disk->queue_depth) {
+		atomic_dec(&phys_disk->ioaccel_cmds_out);
+		return IO_ACCEL_INELIGIBLE;
+	}
 	if (h->transMethod & CFGTBL_Trans_io_accel1)
 		return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle,
-						cdb, cdb_len, scsi3addr);
+						cdb, cdb_len, scsi3addr,
+						phys_disk);
 	else
 		return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle,
-						cdb, cdb_len, scsi3addr);
+						cdb, cdb_len, scsi3addr,
+						phys_disk);
 }
 
 static void raid_map_helper(struct raid_map_data *map,
@@ -3543,21 +3642,22 @@ static void raid_map_helper(struct raid_map_data *map,
 {
 	if (offload_to_mirror == 0)  {
 		/* use physical disk in the first mirrored group. */
-		*map_index %= map->data_disks_per_row;
+		*map_index %= le16_to_cpu(map->data_disks_per_row);
 		return;
 	}
 	do {
 		/* determine mirror group that *map_index indicates */
-		*current_group = *map_index / map->data_disks_per_row;
+		*current_group = *map_index /
+			le16_to_cpu(map->data_disks_per_row);
 		if (offload_to_mirror == *current_group)
 			continue;
-		if (*current_group < (map->layout_map_count - 1)) {
+		if (*current_group < le16_to_cpu(map->layout_map_count) - 1) {
 			/* select map index from next group */
-			*map_index += map->data_disks_per_row;
+			*map_index += le16_to_cpu(map->data_disks_per_row);
 			(*current_group)++;
 		} else {
 			/* select map index from first group */
-			*map_index %= map->data_disks_per_row;
+			*map_index %= le16_to_cpu(map->data_disks_per_row);
 			*current_group = 0;
 		}
 	} while (offload_to_mirror != *current_group);
@@ -3595,13 +3695,12 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 	u32 disk_block_cnt;
 	u8 cdb[16];
 	u8 cdb_len;
+	u16 strip_size;
 #if BITS_PER_LONG == 32
 	u64 tmpdiv;
 #endif
 	int offload_to_mirror;
 
-	BUG_ON(!(dev->offload_config && dev->offload_enabled));
-
 	/* check for valid opcode, get LBA and block count */
 	switch (cmd->cmnd[0]) {
 	case WRITE_6:
@@ -3668,11 +3767,14 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		return IO_ACCEL_INELIGIBLE;
 
 	/* check for invalid block or wraparound */
-	if (last_block >= map->volume_blk_cnt || last_block < first_block)
+	if (last_block >= le64_to_cpu(map->volume_blk_cnt) ||
+		last_block < first_block)
 		return IO_ACCEL_INELIGIBLE;
 
 	/* calculate stripe information for the request */
-	blocks_per_row = map->data_disks_per_row * map->strip_size;
+	blocks_per_row = le16_to_cpu(map->data_disks_per_row) *
+				le16_to_cpu(map->strip_size);
+	strip_size = le16_to_cpu(map->strip_size);
 #if BITS_PER_LONG == 32
 	tmpdiv = first_block;
 	(void) do_div(tmpdiv, blocks_per_row);
@@ -3683,18 +3785,18 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 	first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
 	last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
 	tmpdiv = first_row_offset;
-	(void) do_div(tmpdiv,  map->strip_size);
+	(void) do_div(tmpdiv, strip_size);
 	first_column = tmpdiv;
 	tmpdiv = last_row_offset;
-	(void) do_div(tmpdiv, map->strip_size);
+	(void) do_div(tmpdiv, strip_size);
 	last_column = tmpdiv;
 #else
 	first_row = first_block / blocks_per_row;
 	last_row = last_block / blocks_per_row;
 	first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
 	last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
-	first_column = first_row_offset / map->strip_size;
-	last_column = last_row_offset / map->strip_size;
+	first_column = first_row_offset / strip_size;
+	last_column = last_row_offset / strip_size;
 #endif
 
 	/* if this isn't a single row/column then give to the controller */
@@ -3702,10 +3804,10 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		return IO_ACCEL_INELIGIBLE;
 
 	/* proceeding with driver mapping */
-	total_disks_per_row = map->data_disks_per_row +
-				map->metadata_disks_per_row;
+	total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
+				le16_to_cpu(map->metadata_disks_per_row);
 	map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
-				map->row_cnt;
+				le16_to_cpu(map->row_cnt);
 	map_index = (map_row * total_disks_per_row) + first_column;
 
 	switch (dev->raid_level) {
@@ -3716,23 +3818,24 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		 * (2-drive R1 and R10 with even # of drives.)
 		 * Appropriate for SSDs, not optimal for HDDs
 		 */
-		BUG_ON(map->layout_map_count != 2);
+		BUG_ON(le16_to_cpu(map->layout_map_count) != 2);
 		if (dev->offload_to_mirror)
-			map_index += map->data_disks_per_row;
+			map_index += le16_to_cpu(map->data_disks_per_row);
 		dev->offload_to_mirror = !dev->offload_to_mirror;
 		break;
 	case HPSA_RAID_ADM:
 		/* Handles N-way mirrors  (R1-ADM)
 		 * and R10 with # of drives divisible by 3.)
 		 */
-		BUG_ON(map->layout_map_count != 3);
+		BUG_ON(le16_to_cpu(map->layout_map_count) != 3);
 
 		offload_to_mirror = dev->offload_to_mirror;
 		raid_map_helper(map, offload_to_mirror,
 				&map_index, &current_group);
 		/* set mirror group to use next time */
 		offload_to_mirror =
-			(offload_to_mirror >= map->layout_map_count - 1)
+			(offload_to_mirror >=
+			le16_to_cpu(map->layout_map_count) - 1)
 			? 0 : offload_to_mirror + 1;
 		dev->offload_to_mirror = offload_to_mirror;
 		/* Avoid direct use of dev->offload_to_mirror within this
@@ -3742,14 +3845,16 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		break;
 	case HPSA_RAID_5:
 	case HPSA_RAID_6:
-		if (map->layout_map_count <= 1)
+		if (le16_to_cpu(map->layout_map_count) <= 1)
 			break;
 
 		/* Verify first and last block are in same RAID group */
 		r5or6_blocks_per_row =
-			map->strip_size * map->data_disks_per_row;
+			le16_to_cpu(map->strip_size) *
+			le16_to_cpu(map->data_disks_per_row);
 		BUG_ON(r5or6_blocks_per_row == 0);
-		stripesize = r5or6_blocks_per_row * map->layout_map_count;
+		stripesize = r5or6_blocks_per_row *
+			le16_to_cpu(map->layout_map_count);
 #if BITS_PER_LONG == 32
 		tmpdiv = first_block;
 		first_group = do_div(tmpdiv, stripesize);
@@ -3812,28 +3917,35 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 						r5or6_blocks_per_row);
 
 		first_column = r5or6_first_column =
-			r5or6_first_row_offset / map->strip_size;
+			r5or6_first_row_offset / le16_to_cpu(map->strip_size);
 		r5or6_last_column =
-			r5or6_last_row_offset / map->strip_size;
+			r5or6_last_row_offset / le16_to_cpu(map->strip_size);
 #endif
 		if (r5or6_first_column != r5or6_last_column)
 			return IO_ACCEL_INELIGIBLE;
 
 		/* Request is eligible */
 		map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
-			map->row_cnt;
+			le16_to_cpu(map->row_cnt);
 
 		map_index = (first_group *
-			(map->row_cnt * total_disks_per_row)) +
+			(le16_to_cpu(map->row_cnt) * total_disks_per_row)) +
 			(map_row * total_disks_per_row) + first_column;
 		break;
 	default:
 		return IO_ACCEL_INELIGIBLE;
 	}
 
+	if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES))
+		return IO_ACCEL_INELIGIBLE;
+
+	c->phys_disk = dev->phys_disk[map_index];
+
 	disk_handle = dd[map_index].ioaccel_handle;
-	disk_block = map->disk_starting_blk + (first_row * map->strip_size) +
-			(first_row_offset - (first_column * map->strip_size));
+	disk_block = le64_to_cpu(map->disk_starting_blk) +
+			first_row * le16_to_cpu(map->strip_size) +
+			(first_row_offset - first_column *
+			le16_to_cpu(map->strip_size));
 	disk_block_cnt = block_cnt;
 
 	/* handle differing logical/physical block sizes */
@@ -3876,78 +3988,21 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
 		cdb_len = 10;
 	}
 	return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len,
-						dev->scsi3addr);
+						dev->scsi3addr,
+						dev->phys_disk[map_index]);
 }
 
-/*
- * Running in struct Scsi_Host->host_lock less mode using LLD internal
- * struct ctlr_info *h->lock w/ spin_lock_irqsave() protection.
- */
-static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
+/* Submit commands down the "normal" RAID stack path */
+static int hpsa_ciss_submit(struct ctlr_info *h,
+	struct CommandList *c, struct scsi_cmnd *cmd,
+	unsigned char scsi3addr[])
 {
-	struct ctlr_info *h;
-	struct hpsa_scsi_dev_t *dev;
-	unsigned char scsi3addr[8];
-	struct CommandList *c;
-	int rc = 0;
-
-	/* Get the ptr to our adapter structure out of cmd->host. */
-	h = sdev_to_hba(cmd->device);
-	dev = cmd->device->hostdata;
-	if (!dev) {
-		cmd->result = DID_NO_CONNECT << 16;
-		cmd->scsi_done(cmd);
-		return 0;
-	}
-	memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
-
-	if (unlikely(lockup_detected(h))) {
-		cmd->result = DID_ERROR << 16;
-		cmd->scsi_done(cmd);
-		return 0;
-	}
-	c = cmd_alloc(h);
-	if (c == NULL) {			/* trouble... */
-		dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
-		return SCSI_MLQUEUE_HOST_BUSY;
-	}
-
-	/* Fill in the command list header */
-	/* save c in case we have to abort it  */
 	cmd->host_scribble = (unsigned char *) c;
-
 	c->cmd_type = CMD_SCSI;
 	c->scsi_cmd = cmd;
-
-	/* Call alternate submit routine for I/O accelerated commands.
-	 * Retries always go down the normal I/O path.
-	 */
-	if (likely(cmd->retries == 0 &&
-		cmd->request->cmd_type == REQ_TYPE_FS &&
-		h->acciopath_status)) {
-		if (dev->offload_enabled) {
-			rc = hpsa_scsi_ioaccel_raid_map(h, c);
-			if (rc == 0)
-				return 0; /* Sent on ioaccel path */
-			if (rc < 0) {   /* scsi_dma_map failed. */
-				cmd_free(h, c);
-				return SCSI_MLQUEUE_HOST_BUSY;
-			}
-		} else if (dev->ioaccel_handle) {
-			rc = hpsa_scsi_ioaccel_direct_map(h, c);
-			if (rc == 0)
-				return 0; /* Sent on direct map path */
-			if (rc < 0) {   /* scsi_dma_map failed. */
-				cmd_free(h, c);
-				return SCSI_MLQUEUE_HOST_BUSY;
-			}
-		}
-	}
-
 	c->Header.ReplyQueue = 0;  /* unused in simple mode */
 	memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
-	c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT) |
-					DIRECT_LOOKUP_BIT);
+	c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT));
 
 	/* Fill in the request block... */
 
@@ -4003,66 +4058,167 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	return 0;
 }
 
-static int do_not_scan_if_controller_locked_up(struct ctlr_info *h)
-{
-	unsigned long flags;
-
-	/*
-	 * Don't let rescans be initiated on a controller known
-	 * to be locked up.  If the controller locks up *during*
-	 * a rescan, that thread is probably hosed, but at least
-	 * we can prevent new rescan threads from piling up on a
-	 * locked up controller.
-	 */
-	if (unlikely(lockup_detected(h))) {
-		spin_lock_irqsave(&h->scan_lock, flags);
-		h->scan_finished = 1;
-		wake_up_all(&h->scan_wait_queue);
-		spin_unlock_irqrestore(&h->scan_lock, flags);
-		return 1;
-	}
-	return 0;
-}
-
-static void hpsa_scan_start(struct Scsi_Host *sh)
+static void hpsa_command_resubmit_worker(struct work_struct *work)
 {
-	struct ctlr_info *h = shost_to_hba(sh);
-	unsigned long flags;
+	struct scsi_cmnd *cmd;
+	struct hpsa_scsi_dev_t *dev;
+	struct CommandList *c =
+			container_of(work, struct CommandList, work);
 
-	if (do_not_scan_if_controller_locked_up(h))
+	cmd = c->scsi_cmd;
+	dev = cmd->device->hostdata;
+	if (!dev) {
+		cmd->result = DID_NO_CONNECT << 16;
+		cmd->scsi_done(cmd);
 		return;
-
-	/* wait until any scan already in progress is finished. */
-	while (1) {
-		spin_lock_irqsave(&h->scan_lock, flags);
-		if (h->scan_finished)
-			break;
-		spin_unlock_irqrestore(&h->scan_lock, flags);
-		wait_event(h->scan_wait_queue, h->scan_finished);
-		/* Note: We don't need to worry about a race between this
-		 * thread and driver unload because the midlayer will
-		 * have incremented the reference count, so unload won't
-		 * happen if we're in here.
+	}
+	if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) {
+		/*
+		 * If we get here, it means dma mapping failed. Try
+		 * again via scsi mid layer, which will then get
+		 * SCSI_MLQUEUE_HOST_BUSY.
 		 */
+		cmd->result = DID_IMM_RETRY << 16;
+		cmd->scsi_done(cmd);
 	}
-	h->scan_finished = 0; /* mark scan as in progress */
-	spin_unlock_irqrestore(&h->scan_lock, flags);
-
-	if (do_not_scan_if_controller_locked_up(h))
-		return;
-
-	hpsa_update_scsi_devices(h, h->scsi_host->host_no);
-
-	spin_lock_irqsave(&h->scan_lock, flags);
-	h->scan_finished = 1; /* mark scan as finished. */
-	wake_up_all(&h->scan_wait_queue);
-	spin_unlock_irqrestore(&h->scan_lock, flags);
 }
 
-static int hpsa_scan_finished(struct Scsi_Host *sh,
-	unsigned long elapsed_time)
+/* Running in struct Scsi_Host->host_lock less mode */
+static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 {
-	struct ctlr_info *h = shost_to_hba(sh);
+	struct ctlr_info *h;
+	struct hpsa_scsi_dev_t *dev;
+	unsigned char scsi3addr[8];
+	struct CommandList *c;
+	int rc = 0;
+
+	/* Get the ptr to our adapter structure out of cmd->host. */
+	h = sdev_to_hba(cmd->device);
+	dev = cmd->device->hostdata;
+	if (!dev) {
+		cmd->result = DID_NO_CONNECT << 16;
+		cmd->scsi_done(cmd);
+		return 0;
+	}
+	memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
+
+	if (unlikely(lockup_detected(h))) {
+		cmd->result = DID_ERROR << 16;
+		cmd->scsi_done(cmd);
+		return 0;
+	}
+	c = cmd_alloc(h);
+	if (c == NULL) {			/* trouble... */
+		dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n");
+		return SCSI_MLQUEUE_HOST_BUSY;
+	}
+	if (unlikely(lockup_detected(h))) {
+		cmd->result = DID_ERROR << 16;
+		cmd_free(h, c);
+		cmd->scsi_done(cmd);
+		return 0;
+	}
+
+	/*
+	 * Call alternate submit routine for I/O accelerated commands.
+	 * Retries always go down the normal I/O path.
+	 */
+	if (likely(cmd->retries == 0 &&
+		cmd->request->cmd_type == REQ_TYPE_FS &&
+		h->acciopath_status)) {
+
+		cmd->host_scribble = (unsigned char *) c;
+		c->cmd_type = CMD_SCSI;
+		c->scsi_cmd = cmd;
+
+		if (dev->offload_enabled) {
+			rc = hpsa_scsi_ioaccel_raid_map(h, c);
+			if (rc == 0)
+				return 0; /* Sent on ioaccel path */
+			if (rc < 0) {   /* scsi_dma_map failed. */
+				cmd_free(h, c);
+				return SCSI_MLQUEUE_HOST_BUSY;
+			}
+		} else if (dev->ioaccel_handle) {
+			rc = hpsa_scsi_ioaccel_direct_map(h, c);
+			if (rc == 0)
+				return 0; /* Sent on direct map path */
+			if (rc < 0) {   /* scsi_dma_map failed. */
+				cmd_free(h, c);
+				return SCSI_MLQUEUE_HOST_BUSY;
+			}
+		}
+	}
+	return hpsa_ciss_submit(h, c, cmd, scsi3addr);
+}
+
+static void hpsa_scan_complete(struct ctlr_info *h)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&h->scan_lock, flags);
+	h->scan_finished = 1;
+	wake_up_all(&h->scan_wait_queue);
+	spin_unlock_irqrestore(&h->scan_lock, flags);
+}
+
+static void hpsa_scan_start(struct Scsi_Host *sh)
+{
+	struct ctlr_info *h = shost_to_hba(sh);
+	unsigned long flags;
+
+	/*
+	 * Don't let rescans be initiated on a controller known to be locked
+	 * up.  If the controller locks up *during* a rescan, that thread is
+	 * probably hosed, but at least we can prevent new rescan threads from
+	 * piling up on a locked up controller.
+	 */
+	if (unlikely(lockup_detected(h)))
+		return hpsa_scan_complete(h);
+
+	/* wait until any scan already in progress is finished. */
+	while (1) {
+		spin_lock_irqsave(&h->scan_lock, flags);
+		if (h->scan_finished)
+			break;
+		spin_unlock_irqrestore(&h->scan_lock, flags);
+		wait_event(h->scan_wait_queue, h->scan_finished);
+		/* Note: We don't need to worry about a race between this
+		 * thread and driver unload because the midlayer will
+		 * have incremented the reference count, so unload won't
+		 * happen if we're in here.
+		 */
+	}
+	h->scan_finished = 0; /* mark scan as in progress */
+	spin_unlock_irqrestore(&h->scan_lock, flags);
+
+	if (unlikely(lockup_detected(h)))
+		return hpsa_scan_complete(h);
+
+	hpsa_update_scsi_devices(h, h->scsi_host->host_no);
+
+	hpsa_scan_complete(h);
+}
+
+static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+	struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata;
+
+	if (!logical_drive)
+		return -ENODEV;
+
+	if (qdepth < 1)
+		qdepth = 1;
+	else if (qdepth > logical_drive->queue_depth)
+		qdepth = logical_drive->queue_depth;
+
+	return scsi_change_queue_depth(sdev, qdepth);
+}
+
+static int hpsa_scan_finished(struct Scsi_Host *sh,
+	unsigned long elapsed_time)
+{
+	struct ctlr_info *h = shost_to_hba(sh);
 	unsigned long flags;
 	int finished;
 
@@ -4096,11 +4252,11 @@ static int hpsa_register_scsi(struct ctlr_info *h)
 	sh->max_cmd_len = MAX_COMMAND_SIZE;
 	sh->max_lun = HPSA_MAX_LUN;
 	sh->max_id = HPSA_MAX_LUN;
-	sh->can_queue = h->nr_cmds;
-	if (h->hba_mode_enabled)
-		sh->cmd_per_lun = 7;
-	else
-		sh->cmd_per_lun = h->nr_cmds;
+	sh->can_queue = h->nr_cmds -
+			HPSA_CMDS_RESERVED_FOR_ABORTS -
+			HPSA_CMDS_RESERVED_FOR_DRIVER -
+			HPSA_MAX_CONCURRENT_PASSTHRUS;
+	sh->cmd_per_lun = sh->can_queue;
 	sh->sg_tablesize = h->maxsgentries;
 	h->scsi_host = sh;
 	sh->hostdata[0] = (unsigned long) h;
@@ -4131,7 +4287,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
 	int waittime = 1; /* seconds */
 	struct CommandList *c;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (!c) {
 		dev_warn(&h->pdev->dev, "out of memory in "
 			"wait_for_device_to_become_ready.\n");
@@ -4177,7 +4333,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
 	else
 		dev_warn(&h->pdev->dev, "device is ready.\n");
 
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 	return rc;
 }
 
@@ -4194,6 +4350,10 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 	h = sdev_to_hba(scsicmd->device);
 	if (h == NULL) /* paranoia */
 		return FAILED;
+
+	if (lockup_detected(h))
+		return FAILED;
+
 	dev = scsicmd->device->hostdata;
 	if (!dev) {
 		dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: "
@@ -4227,13 +4387,15 @@ static void swizzle_abort_tag(u8 *tag)
 }
 
 static void hpsa_get_tag(struct ctlr_info *h,
-	struct CommandList *c, u32 *taglower, u32 *tagupper)
+	struct CommandList *c, __le32 *taglower, __le32 *tagupper)
 {
+	u64 tag;
 	if (c->cmd_type == CMD_IOACCEL1) {
 		struct io_accel1_cmd *cm1 = (struct io_accel1_cmd *)
 			&h->ioaccel_cmd_pool[c->cmdindex];
-		*tagupper = (u32) (cm1->tag >> 32);
-		*taglower = (u32) (cm1->tag & 0x0ffffffffULL);
+		tag = le64_to_cpu(cm1->tag);
+		*tagupper = cpu_to_le32(tag >> 32);
+		*taglower = cpu_to_le32(tag);
 		return;
 	}
 	if (c->cmd_type == CMD_IOACCEL2) {
@@ -4244,8 +4406,9 @@ static void hpsa_get_tag(struct ctlr_info *h,
 		*taglower = cm2->Tag;
 		return;
 	}
-	*tagupper = (u32) (c->Header.tag >> 32);
-	*taglower = (u32) (c->Header.tag & 0x0ffffffffULL);
+	tag = le64_to_cpu(c->Header.tag);
+	*tagupper = cpu_to_le32(tag >> 32);
+	*taglower = cpu_to_le32(tag);
 }
 
 static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
@@ -4254,11 +4417,11 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
 	int rc = IO_OK;
 	struct CommandList *c;
 	struct ErrorInfo *ei;
-	u32 tagupper, taglower;
+	__le32 tagupper, taglower;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (c == NULL) {	/* trouble... */
-		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		return -ENOMEM;
 	}
 
@@ -4287,62 +4450,12 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
 		rc = -1;
 		break;
 	}
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 	dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n",
 		__func__, tagupper, taglower);
 	return rc;
 }
 
-/*
- * hpsa_find_cmd_in_queue
- *
- * Used to determine whether a command (find) is still present
- * in queue_head.   Optionally excludes the last element of queue_head.
- *
- * This is used to avoid unnecessary aborts.  Commands in h->reqQ have
- * not yet been submitted, and so can be aborted by the driver without
- * sending an abort to the hardware.
- *
- * Returns pointer to command if found in queue, NULL otherwise.
- */
-static struct CommandList *hpsa_find_cmd_in_queue(struct ctlr_info *h,
-			struct scsi_cmnd *find, struct list_head *queue_head)
-{
-	unsigned long flags;
-	struct CommandList *c = NULL;	/* ptr into cmpQ */
-
-	if (!find)
-		return NULL;
-	spin_lock_irqsave(&h->lock, flags);
-	list_for_each_entry(c, queue_head, list) {
-		if (c->scsi_cmd == NULL) /* e.g.: passthru ioctl */
-			continue;
-		if (c->scsi_cmd == find) {
-			spin_unlock_irqrestore(&h->lock, flags);
-			return c;
-		}
-	}
-	spin_unlock_irqrestore(&h->lock, flags);
-	return NULL;
-}
-
-static struct CommandList *hpsa_find_cmd_in_queue_by_tag(struct ctlr_info *h,
-					u8 *tag, struct list_head *queue_head)
-{
-	unsigned long flags;
-	struct CommandList *c;
-
-	spin_lock_irqsave(&h->lock, flags);
-	list_for_each_entry(c, queue_head, list) {
-		if (memcmp(&c->Header.tag, tag, 8) != 0)
-			continue;
-		spin_unlock_irqrestore(&h->lock, flags);
-		return c;
-	}
-	spin_unlock_irqrestore(&h->lock, flags);
-	return NULL;
-}
-
 /* ioaccel2 path firmware cannot handle abort task requests.
  * Change abort requests to physical target reset, and send to the
  * address of the physical disk used for the ioaccel 2 command.
@@ -4360,7 +4473,7 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
 	unsigned char *psa = &phys_scsi3addr[0];
 
 	/* Get a pointer to the hpsa logical device. */
-	scmd = (struct scsi_cmnd *) abort->scsi_cmd;
+	scmd = abort->scsi_cmd;
 	dev = (struct hpsa_scsi_dev_t *)(scmd->device->hostdata);
 	if (dev == NULL) {
 		dev_warn(&h->pdev->dev,
@@ -4429,10 +4542,6 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
 static int hpsa_send_abort_both_ways(struct ctlr_info *h,
 	unsigned char *scsi3addr, struct CommandList *abort)
 {
-	u8 swizzled_tag[8];
-	struct CommandList *c;
-	int rc = 0, rc2 = 0;
-
 	/* ioccelerator mode 2 commands should be aborted via the
 	 * accelerated path, since RAID path is unaware of these commands,
 	 * but underlying firmware can't handle abort TMF.
@@ -4441,27 +4550,8 @@ static int hpsa_send_abort_both_ways(struct ctlr_info *h,
 	if (abort->cmd_type == CMD_IOACCEL2)
 		return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort);
 
-	/* we do not expect to find the swizzled tag in our queue, but
-	 * check anyway just to be sure the assumptions which make this
-	 * the case haven't become wrong.
-	 */
-	memcpy(swizzled_tag, &abort->Request.CDB[4], 8);
-	swizzle_abort_tag(swizzled_tag);
-	c = hpsa_find_cmd_in_queue_by_tag(h, swizzled_tag, &h->cmpQ);
-	if (c != NULL) {
-		dev_warn(&h->pdev->dev, "Unexpectedly found byte-swapped tag in completion queue.\n");
-		return hpsa_send_abort(h, scsi3addr, abort, 0);
-	}
-	rc = hpsa_send_abort(h, scsi3addr, abort, 0);
-
-	/* if the command is still in our queue, we can't conclude that it was
-	 * aborted (it might have just completed normally) but in any case
-	 * we don't need to try to abort it another way.
-	 */
-	c = hpsa_find_cmd_in_queue(h, abort->scsi_cmd, &h->cmpQ);
-	if (c)
-		rc2 = hpsa_send_abort(h, scsi3addr, abort, 1);
-	return rc && rc2;
+	return hpsa_send_abort(h, scsi3addr, abort, 0) &&
+			hpsa_send_abort(h, scsi3addr, abort, 1);
 }
 
 /* Send an abort for the specified command.
@@ -4475,11 +4565,11 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 	struct ctlr_info *h;
 	struct hpsa_scsi_dev_t *dev;
 	struct CommandList *abort; /* pointer to command to be aborted */
-	struct CommandList *found;
 	struct scsi_cmnd *as;	/* ptr to scsi cmd inside aborted command. */
 	char msg[256];		/* For debug messaging. */
 	int ml = 0;
-	u32 tagupper, taglower;
+	__le32 tagupper, taglower;
+	int refcount;
 
 	/* Find the controller of the command to be aborted */
 	h = sdev_to_hba(sc->device);
@@ -4487,6 +4577,9 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 			"ABORT REQUEST FAILED, Controller lookup failed.\n"))
 		return FAILED;
 
+	if (lockup_detected(h))
+		return FAILED;
+
 	/* Check that controller supports some kind of task abort */
 	if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) &&
 		!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags))
@@ -4508,41 +4601,23 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 	/* Get SCSI command to be aborted */
 	abort = (struct CommandList *) sc->host_scribble;
 	if (abort == NULL) {
-		dev_err(&h->pdev->dev, "%s FAILED, Command to abort is NULL.\n",
-				msg);
-		return FAILED;
+		/* This can happen if the command already completed. */
+		return SUCCESS;
+	}
+	refcount = atomic_inc_return(&abort->refcount);
+	if (refcount == 1) { /* Command is done already. */
+		cmd_free(h, abort);
+		return SUCCESS;
 	}
 	hpsa_get_tag(h, abort, &taglower, &tagupper);
 	ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
-	as  = (struct scsi_cmnd *) abort->scsi_cmd;
+	as  = abort->scsi_cmd;
 	if (as != NULL)
 		ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ",
 			as->cmnd[0], as->serial_number);
 	dev_dbg(&h->pdev->dev, "%s\n", msg);
 	dev_warn(&h->pdev->dev, "Abort request on C%d:B%d:T%d:L%d\n",
 		h->scsi_host->host_no, dev->bus, dev->target, dev->lun);
-
-	/* Search reqQ to See if command is queued but not submitted,
-	 * if so, complete the command with aborted status and remove
-	 * it from the reqQ.
-	 */
-	found = hpsa_find_cmd_in_queue(h, sc, &h->reqQ);
-	if (found) {
-		found->err_info->CommandStatus = CMD_ABORTED;
-		finish_cmd(found);
-		dev_info(&h->pdev->dev, "%s Request SUCCEEDED (driver queue).\n",
-				msg);
-		return SUCCESS;
-	}
-
-	/* not in reqQ, if also not in cmpQ, must have already completed */
-	found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ);
-	if (!found)  {
-		dev_dbg(&h->pdev->dev, "%s Request SUCCEEDED (not known to driver).\n",
-				msg);
-		return SUCCESS;
-	}
-
 	/*
 	 * Command is in flight, or possibly already completed
 	 * by the firmware (but not to the scsi mid layer) but we can't
@@ -4554,6 +4629,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 		dev_warn(&h->pdev->dev, "FAILED abort on device C%d:B%d:T%d:L%d\n",
 			h->scsi_host->host_no,
 			dev->bus, dev->target, dev->lun);
+		cmd_free(h, abort);
 		return FAILED;
 	}
 	dev_info(&h->pdev->dev, "%s REQUEST SUCCEEDED.\n", msg);
@@ -4565,32 +4641,38 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
 	 */
 #define ABORT_COMPLETE_WAIT_SECS 30
 	for (i = 0; i < ABORT_COMPLETE_WAIT_SECS * 10; i++) {
-		found = hpsa_find_cmd_in_queue(h, sc, &h->cmpQ);
-		if (!found)
+		refcount = atomic_read(&abort->refcount);
+		if (refcount < 2) {
+			cmd_free(h, abort);
 			return SUCCESS;
-		msleep(100);
+		} else {
+			msleep(100);
+		}
 	}
 	dev_warn(&h->pdev->dev, "%s FAILED. Aborted command has not completed after %d seconds.\n",
 		msg, ABORT_COMPLETE_WAIT_SECS);
+	cmd_free(h, abort);
 	return FAILED;
 }
 
-
 /*
  * For operations that cannot sleep, a command block is allocated at init,
  * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
  * which ones are free or in use.  Lock must be held when calling this.
  * cmd_free() is the complement.
  */
+
 static struct CommandList *cmd_alloc(struct ctlr_info *h)
 {
 	struct CommandList *c;
 	int i;
 	union u64bit temp64;
 	dma_addr_t cmd_dma_handle, err_dma_handle;
-	int loopcount;
+	int refcount;
+	unsigned long offset;
 
-	/* There is some *extremely* small but non-zero chance that that
+	/*
+	 * There is some *extremely* small but non-zero chance that that
 	 * multiple threads could get in here, and one thread could
 	 * be scanning through the list of bits looking for a free
 	 * one, but the free ones are always behind him, and other
@@ -4601,24 +4683,30 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
 	 * infrequently as to be indistinguishable from never.
 	 */
 
-	loopcount = 0;
-	do {
-		i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
-		if (i == h->nr_cmds)
-			i = 0;
-		loopcount++;
-	} while (test_and_set_bit(i & (BITS_PER_LONG - 1),
-		  h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0 &&
-		loopcount < 10);
-
-	/* Thread got starved?  We do not expect this to ever happen. */
-	if (loopcount >= 10)
-		return NULL;
-
-	c = h->cmd_pool + i;
-	memset(c, 0, sizeof(*c));
-	cmd_dma_handle = h->cmd_pool_dhandle
-	    + i * sizeof(*c);
+	offset = h->last_allocation; /* benignly racy */
+	for (;;) {
+		i = find_next_zero_bit(h->cmd_pool_bits, h->nr_cmds, offset);
+		if (unlikely(i == h->nr_cmds)) {
+			offset = 0;
+			continue;
+		}
+		c = h->cmd_pool + i;
+		refcount = atomic_inc_return(&c->refcount);
+		if (unlikely(refcount > 1)) {
+			cmd_free(h, c); /* already in use */
+			offset = (i + 1) % h->nr_cmds;
+			continue;
+		}
+		set_bit(i & (BITS_PER_LONG - 1),
+			h->cmd_pool_bits + (i / BITS_PER_LONG));
+		break; /* it's ours now. */
+	}
+	h->last_allocation = i; /* benignly racy */
+
+	/* Zero out all of commandlist except the last field, refcount */
+	memset(c, 0, offsetof(struct CommandList, refcount));
+	c->Header.tag = cpu_to_le64((u64) (i << DIRECT_LOOKUP_SHIFT));
+	cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(*c);
 	c->err_info = h->errinfo_pool + i;
 	memset(c->err_info, 0, sizeof(*c->err_info));
 	err_dma_handle = h->errinfo_pool_dhandle
@@ -4626,45 +4714,10 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
 
 	c->cmdindex = i;
 
-	INIT_LIST_HEAD(&c->list);
 	c->busaddr = (u32) cmd_dma_handle;
 	temp64.val = (u64) err_dma_handle;
-	c->ErrDesc.Addr = cpu_to_le64(err_dma_handle);
-	c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info));
-
-	c->h = h;
-	return c;
-}
-
-/* For operations that can wait for kmalloc to possibly sleep,
- * this routine can be called. Lock need not be held to call
- * cmd_special_alloc. cmd_special_free() is the complement.
- */
-static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
-{
-	struct CommandList *c;
-	dma_addr_t cmd_dma_handle, err_dma_handle;
-
-	c = pci_zalloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle);
-	if (c == NULL)
-		return NULL;
-
-	c->cmd_type = CMD_SCSI;
-	c->cmdindex = -1;
-
-	c->err_info = pci_zalloc_consistent(h->pdev, sizeof(*c->err_info),
-					    &err_dma_handle);
-
-	if (c->err_info == NULL) {
-		pci_free_consistent(h->pdev,
-			sizeof(*c), c, cmd_dma_handle);
-		return NULL;
-	}
-
-	INIT_LIST_HEAD(&c->list);
-	c->busaddr = (u32) cmd_dma_handle;
-	c->ErrDesc.Addr = cpu_to_le64(err_dma_handle);
-	c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info));
+	c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
+	c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
 
 	c->h = h;
 	return c;
@@ -4672,20 +4725,13 @@ static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
 
 static void cmd_free(struct ctlr_info *h, struct CommandList *c)
 {
-	int i;
-
-	i = c - h->cmd_pool;
-	clear_bit(i & (BITS_PER_LONG - 1),
-		  h->cmd_pool_bits + (i / BITS_PER_LONG));
-}
+	if (atomic_dec_and_test(&c->refcount)) {
+		int i;
 
-static void cmd_special_free(struct ctlr_info *h, struct CommandList *c)
-{
-	pci_free_consistent(h->pdev, sizeof(*c->err_info),
-			    c->err_info,
-			    (dma_addr_t) le64_to_cpu(c->ErrDesc.Addr));
-	pci_free_consistent(h->pdev, sizeof(*c),
-			    c, (dma_addr_t) (c->busaddr & DIRECT_LOOKUP_MASK));
+		i = c - h->cmd_pool;
+		clear_bit(i & (BITS_PER_LONG - 1),
+			  h->cmd_pool_bits + (i / BITS_PER_LONG));
+	}
 }
 
 #ifdef CONFIG_COMPAT
@@ -4866,7 +4912,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 			memset(buff, 0, iocommand.buf_size);
 		}
 	}
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (c == NULL) {
 		rc = -ENOMEM;
 		goto out_kfree;
@@ -4883,8 +4929,6 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		c->Header.SGTotal = cpu_to_le16(0);
 	}
 	memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN));
-	/* use the kernel address the cmd block for tag */
-	c->Header.tag = c->busaddr;
 
 	/* Fill in Request block */
 	memcpy(&c->Request, &iocommand.Request,
@@ -4925,7 +4969,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		}
 	}
 out:
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 out_kfree:
 	kfree(buff);
 	return rc;
@@ -4940,7 +4984,6 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 	u64 temp64;
 	BYTE sg_used = 0;
 	int status = 0;
-	int i;
 	u32 left;
 	u32 sz;
 	BYTE __user *data_ptr;
@@ -5004,7 +5047,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		data_ptr += sz;
 		sg_used++;
 	}
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (c == NULL) {
 		status = -ENOMEM;
 		goto cleanup1;
@@ -5014,7 +5057,6 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 	c->Header.SGList = (u8) sg_used;
 	c->Header.SGTotal = cpu_to_le16(sg_used);
 	memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
-	c->Header.tag = c->busaddr;
 	memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
 	if (ioc->buf_size > 0) {
 		int i;
@@ -5047,6 +5089,8 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		goto cleanup0;
 	}
 	if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) {
+		int i;
+
 		/* Copy the data out of the buffer we created */
 		BYTE __user *ptr = ioc->buf;
 		for (i = 0; i < sg_used; i++) {
@@ -5059,9 +5103,11 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 	}
 	status = 0;
 cleanup0:
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 cleanup1:
 	if (buff) {
+		int i;
+
 		for (i = 0; i < sg_used; i++)
 			kfree(buff[i]);
 		kfree(buff);
@@ -5079,35 +5125,6 @@ static void check_ioctl_unit_attention(struct ctlr_info *h,
 		(void) check_for_unit_attention(h, c);
 }
 
-static int increment_passthru_count(struct ctlr_info *h)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&h->passthru_count_lock, flags);
-	if (h->passthru_count >= HPSA_MAX_CONCURRENT_PASSTHRUS) {
-		spin_unlock_irqrestore(&h->passthru_count_lock, flags);
-		return -1;
-	}
-	h->passthru_count++;
-	spin_unlock_irqrestore(&h->passthru_count_lock, flags);
-	return 0;
-}
-
-static void decrement_passthru_count(struct ctlr_info *h)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&h->passthru_count_lock, flags);
-	if (h->passthru_count <= 0) {
-		spin_unlock_irqrestore(&h->passthru_count_lock, flags);
-		/* not expecting to get here. */
-		dev_warn(&h->pdev->dev, "Bug detected, passthru_count seems to be incorrect.\n");
-		return;
-	}
-	h->passthru_count--;
-	spin_unlock_irqrestore(&h->passthru_count_lock, flags);
-}
-
 /*
  * ioctl
  */
@@ -5130,16 +5147,16 @@ static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
 	case CCISS_GETDRIVVER:
 		return hpsa_getdrivver_ioctl(h, argp);
 	case CCISS_PASSTHRU:
-		if (increment_passthru_count(h))
+		if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
 			return -EAGAIN;
 		rc = hpsa_passthru_ioctl(h, argp);
-		decrement_passthru_count(h);
+		atomic_inc(&h->passthru_cmds_avail);
 		return rc;
 	case CCISS_BIG_PASSTHRU:
-		if (increment_passthru_count(h))
+		if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
 			return -EAGAIN;
 		rc = hpsa_big_passthru_ioctl(h, argp);
-		decrement_passthru_count(h);
+		atomic_inc(&h->passthru_cmds_avail);
 		return rc;
 	default:
 		return -ENOTTY;
@@ -5173,7 +5190,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 {
 	int pci_dir = XFER_NONE;
 	struct CommandList *a; /* for commands to be aborted */
-	u32 tupper, tlower;
 
 	c->cmd_type = CMD_IOCTL_PEND;
 	c->Header.ReplyQueue = 0;
@@ -5184,7 +5200,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 		c->Header.SGList = 0;
 		c->Header.SGTotal = cpu_to_le16(0);
 	}
-	c->Header.tag = c->busaddr;
 	memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
 
 	if (cmd_type == TYPE_CMD) {
@@ -5256,6 +5271,16 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[7] = (size >> 16) & 0xFF;
 			c->Request.CDB[8] = (size >> 8) & 0xFF;
 			break;
+		case BMIC_IDENTIFY_PHYSICAL_DEVICE:
+			c->Request.CDBLen = 10;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = BMIC_READ;
+			c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE;
+			c->Request.CDB[7] = (size >> 16) & 0xFF;
+			c->Request.CDB[8] = (size >> 8) & 0XFF;
+			break;
 		default:
 			dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
 			BUG();
@@ -5281,10 +5306,9 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			break;
 		case  HPSA_ABORT_MSG:
 			a = buff;       /* point to command to be aborted */
-			dev_dbg(&h->pdev->dev, "Abort Tag:0x%016llx using request Tag:0x%016llx",
+			dev_dbg(&h->pdev->dev,
+				"Abort Tag:0x%016llx request Tag:0x%016llx",
 				a->Header.tag, c->Header.tag);
-			tlower = (u32) (a->Header.tag >> 32);
-			tupper = (u32) (a->Header.tag & 0x0ffffffffULL);
 			c->Request.CDBLen = 16;
 			c->Request.type_attr_dir =
 					TYPE_ATTR_DIR(cmd_type,
@@ -5295,14 +5319,8 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[2] = 0x00; /* reserved */
 			c->Request.CDB[3] = 0x00; /* reserved */
 			/* Tag to abort goes in CDB[4]-CDB[11] */
-			c->Request.CDB[4] = tlower & 0xFF;
-			c->Request.CDB[5] = (tlower >> 8) & 0xFF;
-			c->Request.CDB[6] = (tlower >> 16) & 0xFF;
-			c->Request.CDB[7] = (tlower >> 24) & 0xFF;
-			c->Request.CDB[8] = tupper & 0xFF;
-			c->Request.CDB[9] = (tupper >> 8) & 0xFF;
-			c->Request.CDB[10] = (tupper >> 16) & 0xFF;
-			c->Request.CDB[11] = (tupper >> 24) & 0xFF;
+			memcpy(&c->Request.CDB[4], &a->Header.tag,
+				sizeof(a->Header.tag));
 			c->Request.CDB[12] = 0x00; /* reserved */
 			c->Request.CDB[13] = 0x00; /* reserved */
 			c->Request.CDB[14] = 0x00; /* reserved */
@@ -5349,47 +5367,6 @@ static void __iomem *remap_pci_mem(ulong base, ulong size)
 	return page_remapped ? (page_remapped + page_offs) : NULL;
 }
 
-/* Takes cmds off the submission queue and sends them to the hardware,
- * then puts them on the queue of cmds waiting for completion.
- * Assumes h->lock is held
- */
-static void start_io(struct ctlr_info *h, unsigned long *flags)
-{
-	struct CommandList *c;
-
-	while (!list_empty(&h->reqQ)) {
-		c = list_entry(h->reqQ.next, struct CommandList, list);
-		/* can't do anything if fifo is full */
-		if ((h->access.fifo_full(h))) {
-			h->fifo_recently_full = 1;
-			dev_warn(&h->pdev->dev, "fifo full\n");
-			break;
-		}
-		h->fifo_recently_full = 0;
-
-		/* Get the first entry from the Request Q */
-		removeQ(c);
-		h->Qdepth--;
-
-		/* Put job onto the completed Q */
-		addQ(&h->cmpQ, c);
-		atomic_inc(&h->commands_outstanding);
-		spin_unlock_irqrestore(&h->lock, *flags);
-		/* Tell the controller execute command */
-		h->access.submit_command(h, c);
-		spin_lock_irqsave(&h->lock, *flags);
-	}
-}
-
-static void lock_and_start_io(struct ctlr_info *h)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&h->lock, flags);
-	start_io(h, &flags);
-	spin_unlock_irqrestore(&h->lock, flags);
-}
-
 static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q)
 {
 	return h->access.command_completed(h, q);
@@ -5418,53 +5395,12 @@ static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
 
 static inline void finish_cmd(struct CommandList *c)
 {
-	unsigned long flags;
-	int io_may_be_stalled = 0;
-	struct ctlr_info *h = c->h;
-	int count;
-
-	spin_lock_irqsave(&h->lock, flags);
-	removeQ(c);
-
-	/*
-	 * Check for possibly stalled i/o.
-	 *
-	 * If a fifo_full condition is encountered, requests will back up
-	 * in h->reqQ.  This queue is only emptied out by start_io which is
-	 * only called when a new i/o request comes in.  If no i/o's are
-	 * forthcoming, the i/o's in h->reqQ can get stuck.  So we call
-	 * start_io from here if we detect such a danger.
-	 *
-	 * Normally, we shouldn't hit this case, but pounding on the
-	 * CCISS_PASSTHRU ioctl can provoke it.  Only call start_io if
-	 * commands_outstanding is low.  We want to avoid calling
-	 * start_io from in here as much as possible, and esp. don't
-	 * want to get in a cycle where we call start_io every time
-	 * through here.
-	 */
-	count = atomic_read(&h->commands_outstanding);
-	spin_unlock_irqrestore(&h->lock, flags);
-	if (unlikely(h->fifo_recently_full) && count < 5)
-		io_may_be_stalled = 1;
-
 	dial_up_lockup_detection_on_fw_flash_complete(c->h, c);
 	if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
 			|| c->cmd_type == CMD_IOACCEL2))
 		complete_scsi_command(c);
 	else if (c->cmd_type == CMD_IOCTL_PEND)
 		complete(c->waiting);
-	if (unlikely(io_may_be_stalled))
-		lock_and_start_io(h);
-}
-
-static inline u32 hpsa_tag_contains_index(u32 tag)
-{
-	return tag & DIRECT_LOOKUP_BIT;
-}
-
-static inline u32 hpsa_tag_to_index(u32 tag)
-{
-	return tag >> DIRECT_LOOKUP_SHIFT;
 }
 
 
@@ -5484,34 +5420,13 @@ static inline void process_indexed_cmd(struct ctlr_info *h,
 	u32 tag_index;
 	struct CommandList *c;
 
-	tag_index = hpsa_tag_to_index(raw_tag);
+	tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT;
 	if (!bad_tag(h, tag_index, raw_tag)) {
 		c = h->cmd_pool + tag_index;
 		finish_cmd(c);
 	}
 }
 
-/* process completion of a non-indexed command */
-static inline void process_nonindexed_cmd(struct ctlr_info *h,
-	u32 raw_tag)
-{
-	u32 tag;
-	struct CommandList *c = NULL;
-	unsigned long flags;
-
-	tag = hpsa_tag_discard_error_bits(h, raw_tag);
-	spin_lock_irqsave(&h->lock, flags);
-	list_for_each_entry(c, &h->cmpQ, list) {
-		if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
-			spin_unlock_irqrestore(&h->lock, flags);
-			finish_cmd(c);
-			return;
-		}
-	}
-	spin_unlock_irqrestore(&h->lock, flags);
-	bad_tag(h, h->nr_cmds + 1, raw_tag);
-}
-
 /* Some controllers, like p400, will give us one interrupt
  * after a soft reset, even if we turned interrupts off.
  * Only need to check for this in the hpsa_xxx_discard_completions
@@ -5589,10 +5504,7 @@ static irqreturn_t do_hpsa_intr_intx(int irq, void *queue)
 	while (interrupt_pending(h)) {
 		raw_tag = get_next_completion(h, q);
 		while (raw_tag != FIFO_EMPTY) {
-			if (likely(hpsa_tag_contains_index(raw_tag)))
-				process_indexed_cmd(h, raw_tag);
-			else
-				process_nonindexed_cmd(h, raw_tag);
+			process_indexed_cmd(h, raw_tag);
 			raw_tag = next_command(h, q);
 		}
 	}
@@ -5608,10 +5520,7 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *queue)
 	h->last_intr_timestamp = get_jiffies_64();
 	raw_tag = get_next_completion(h, q);
 	while (raw_tag != FIFO_EMPTY) {
-		if (likely(hpsa_tag_contains_index(raw_tag)))
-			process_indexed_cmd(h, raw_tag);
-		else
-			process_nonindexed_cmd(h, raw_tag);
+		process_indexed_cmd(h, raw_tag);
 		raw_tag = next_command(h, q);
 	}
 	return IRQ_HANDLED;
@@ -5633,7 +5542,8 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 	static const size_t cmd_sz = sizeof(*cmd) +
 					sizeof(cmd->ErrorDescriptor);
 	dma_addr_t paddr64;
-	uint32_t paddr32, tag;
+	__le32 paddr32;
+	u32 tag;
 	void __iomem *vaddr;
 	int i, err;
 
@@ -5648,7 +5558,7 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 	if (err) {
 		iounmap(vaddr);
-		return -ENOMEM;
+		return err;
 	}
 
 	cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
@@ -5661,12 +5571,12 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 	 * although there's no guarantee, we assume that the address is at
 	 * least 4-byte aligned (most likely, it's page-aligned).
 	 */
-	paddr32 = paddr64;
+	paddr32 = cpu_to_le32(paddr64);
 
 	cmd->CommandHeader.ReplyQueue = 0;
 	cmd->CommandHeader.SGList = 0;
 	cmd->CommandHeader.SGTotal = cpu_to_le16(0);
-	cmd->CommandHeader.tag = paddr32;
+	cmd->CommandHeader.tag = cpu_to_le64(paddr64);
 	memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
 
 	cmd->Request.CDBLen = 16;
@@ -5677,14 +5587,14 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 	cmd->Request.CDB[1] = type;
 	memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
 	cmd->ErrorDescriptor.Addr =
-			cpu_to_le64((paddr32 + sizeof(*cmd)));
+			cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd)));
 	cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo));
 
-	writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+	writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET);
 
 	for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
 		tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
-		if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr32)
+		if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64)
 			break;
 		msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
 	}
@@ -5718,8 +5628,6 @@ static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 static int hpsa_controller_hard_reset(struct pci_dev *pdev,
 	void __iomem *vaddr, u32 use_doorbell)
 {
-	u16 pmcsr;
-	int pos;
 
 	if (use_doorbell) {
 		/* For everything after the P600, the PCI power state method
@@ -5745,26 +5653,21 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev,
 		 * this causes a secondary PCI reset which will reset the
 		 * controller." */
 
-		pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
-		if (pos == 0) {
-			dev_err(&pdev->dev,
-				"hpsa_reset_controller: "
-				"PCI PM not supported\n");
-			return -ENODEV;
-		}
+		int rc = 0;
+
 		dev_info(&pdev->dev, "using PCI PM to reset controller\n");
+
 		/* enter the D3hot power management state */
-		pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
-		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
-		pmcsr |= PCI_D3hot;
-		pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+		rc = pci_set_power_state(pdev, PCI_D3hot);
+		if (rc)
+			return rc;
 
 		msleep(500);
 
 		/* enter the D0 power management state */
-		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
-		pmcsr |= PCI_D0;
-		pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+		rc = pci_set_power_state(pdev, PCI_D0);
+		if (rc)
+			return rc;
 
 		/*
 		 * The P600 requires a small delay when changing states.
@@ -5858,8 +5761,12 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	 */
 
 	rc = hpsa_lookup_board_id(pdev, &board_id);
-	if (rc < 0 || !ctlr_is_resettable(board_id)) {
-		dev_warn(&pdev->dev, "Not resetting device.\n");
+	if (rc < 0) {
+		dev_warn(&pdev->dev, "Board ID not found\n");
+		return rc;
+	}
+	if (!ctlr_is_resettable(board_id)) {
+		dev_warn(&pdev->dev, "Controller not resettable\n");
 		return -ENODEV;
 	}
 
@@ -5892,7 +5799,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	}
 	rc = write_driver_ver_to_cfgtable(cfgtable);
 	if (rc)
-		goto unmap_vaddr;
+		goto unmap_cfgtable;
 
 	/* If reset via doorbell register is supported, use that.
 	 * There are two such methods.  Favor the newest method.
@@ -5904,8 +5811,8 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	} else {
 		use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
 		if (use_doorbell) {
-			dev_warn(&pdev->dev, "Soft reset not supported. "
-				"Firmware update is required.\n");
+			dev_warn(&pdev->dev,
+				"Soft reset not supported. Firmware update is required.\n");
 			rc = -ENOTSUPP; /* try soft reset */
 			goto unmap_cfgtable;
 		}
@@ -5925,8 +5832,7 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
 	if (rc) {
 		dev_warn(&pdev->dev,
-			"failed waiting for board to become ready "
-			"after hard reset\n");
+			"Failed waiting for board to become ready after hard reset\n");
 		goto unmap_cfgtable;
 	}
 
@@ -5977,7 +5883,7 @@ static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb)
 	       readl(&(tb->HostWrite.CoalIntDelay)));
 	dev_info(dev, "   Coalesce Interrupt Count = 0x%x\n",
 	       readl(&(tb->HostWrite.CoalIntCount)));
-	dev_info(dev, "   Max outstanding commands = 0x%d\n",
+	dev_info(dev, "   Max outstanding commands = %d\n",
 	       readl(&(tb->CmdsOutMax)));
 	dev_info(dev, "   Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
 	for (i = 0; i < 16; i++)
@@ -6025,7 +5931,7 @@ static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
 }
 
 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
- * controllers that are capable. If not, we use IO-APIC mode.
+ * controllers that are capable. If not, we use legacy INTx mode.
  */
 
 static void hpsa_interrupt_mode(struct ctlr_info *h)
@@ -6044,7 +5950,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
 	    (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
 		goto default_int_mode;
 	if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
-		dev_info(&h->pdev->dev, "MSIX\n");
+		dev_info(&h->pdev->dev, "MSI-X capable controller\n");
 		h->msix_vector = MAX_REPLY_QUEUES;
 		if (h->msix_vector > num_online_cpus())
 			h->msix_vector = num_online_cpus();
@@ -6065,7 +5971,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
 	}
 single_msi_mode:
 	if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
-		dev_info(&h->pdev->dev, "MSI\n");
+		dev_info(&h->pdev->dev, "MSI capable controller\n");
 		if (!pci_enable_msi(h->pdev))
 			h->msi_vector = 1;
 		else
@@ -6172,8 +6078,10 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
 		return rc;
 	h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
 		       cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
-	if (!h->cfgtable)
+	if (!h->cfgtable) {
+		dev_err(&h->pdev->dev, "Failed mapping cfgtable\n");
 		return -ENOMEM;
+	}
 	rc = write_driver_ver_to_cfgtable(h->cfgtable);
 	if (rc)
 		return rc;
@@ -6204,6 +6112,15 @@ static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
 	}
 }
 
+/* If the controller reports that the total max sg entries is greater than 512,
+ * then we know that chained SG blocks work.  (Original smart arrays did not
+ * support chained SG blocks and would return zero for max sg entries.)
+ */
+static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h)
+{
+	return h->maxsgentries > 512;
+}
+
 /* Interrogate the hardware for some limits:
  * max commands, max SG elements without chaining, and with chaining,
  * SG chain block size, etc.
@@ -6211,21 +6128,23 @@ static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
 static void hpsa_find_board_params(struct ctlr_info *h)
 {
 	hpsa_get_max_perf_mode_cmds(h);
-	h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+	h->nr_cmds = h->max_commands;
 	h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
 	h->fw_support = readl(&(h->cfgtable->misc_fw_support));
-	/*
-	 * Limit in-command s/g elements to 32 save dma'able memory.
-	 * Howvever spec says if 0, use 31
-	 */
-	h->max_cmd_sg_entries = 31;
-	if (h->maxsgentries > 512) {
+	if (hpsa_supports_chained_sg_blocks(h)) {
+		/* Limit in-command s/g elements to 32 save dma'able memory. */
 		h->max_cmd_sg_entries = 32;
 		h->chainsize = h->maxsgentries - h->max_cmd_sg_entries;
 		h->maxsgentries--; /* save one for chain pointer */
 	} else {
-		h->chainsize = 0;
+		/*
+		 * Original smart arrays supported at most 31 s/g entries
+		 * embedded inline in the command (trying to use more
+		 * would lock up the controller)
+		 */
+		h->max_cmd_sg_entries = 31;
 		h->maxsgentries = 31; /* default to traditional values */
+		h->chainsize = 0;
 	}
 
 	/* Find out what task management functions are supported and cache */
@@ -6239,7 +6158,7 @@ static void hpsa_find_board_params(struct ctlr_info *h)
 static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
 {
 	if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
-		dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
+		dev_err(&h->pdev->dev, "not a valid CISS config table\n");
 		return false;
 	}
 	return true;
@@ -6272,24 +6191,27 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
 	writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
 }
 
-static void hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h)
+static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h)
 {
 	int i;
 	u32 doorbell_value;
 	unsigned long flags;
 	/* wait until the clear_event_notify bit 6 is cleared by controller. */
-	for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+	for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) {
 		spin_lock_irqsave(&h->lock, flags);
 		doorbell_value = readl(h->vaddr + SA5_DOORBELL);
 		spin_unlock_irqrestore(&h->lock, flags);
 		if (!(doorbell_value & DOORBELL_CLEAR_EVENTS))
-			break;
+			goto done;
 		/* delay and try again */
-		msleep(20);
+		msleep(CLEAR_EVENT_WAIT_INTERVAL);
 	}
+	return -ENODEV;
+done:
+	return 0;
 }
 
-static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
+static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
 {
 	int i;
 	u32 doorbell_value;
@@ -6299,17 +6221,21 @@ static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
 	 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
 	 * as we enter this code.)
 	 */
-	for (i = 0; i < MAX_CONFIG_WAIT; i++) {
+	for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) {
 		spin_lock_irqsave(&h->lock, flags);
 		doorbell_value = readl(h->vaddr + SA5_DOORBELL);
 		spin_unlock_irqrestore(&h->lock, flags);
 		if (!(doorbell_value & CFGTBL_ChangeReq))
-			break;
+			goto done;
 		/* delay and try again */
-		usleep_range(10000, 20000);
+		msleep(MODE_CHANGE_WAIT_INTERVAL);
 	}
+	return -ENODEV;
+done:
+	return 0;
 }
 
+/* return -ENODEV or other reason on error, 0 on success */
 static int hpsa_enter_simple_mode(struct ctlr_info *h)
 {
 	u32 trans_support;
@@ -6324,14 +6250,15 @@ static int hpsa_enter_simple_mode(struct ctlr_info *h)
 	writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
 	writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi);
 	writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
-	hpsa_wait_for_mode_change_ack(h);
+	if (hpsa_wait_for_mode_change_ack(h))
+		goto error;
 	print_cfg_table(&h->pdev->dev, h->cfgtable);
 	if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple))
 		goto error;
 	h->transMethod = CFGTBL_Trans_Simple;
 	return 0;
 error:
-	dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
+	dev_err(&h->pdev->dev, "failed to enter simple mode\n");
 	return -ENODEV;
 }
 
@@ -6341,7 +6268,7 @@ static int hpsa_pci_init(struct ctlr_info *h)
 
 	prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id);
 	if (prod_index < 0)
-		return -ENODEV;
+		return prod_index;
 	h->product_name = products[prod_index].product_name;
 	h->access = *(products[prod_index].access);
 
@@ -6422,6 +6349,7 @@ static void hpsa_hba_inquiry(struct ctlr_info *h)
 static int hpsa_init_reset_devices(struct pci_dev *pdev)
 {
 	int rc, i;
+	void __iomem *vaddr;
 
 	if (!reset_devices)
 		return 0;
@@ -6445,6 +6373,14 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 
 	pci_set_master(pdev);
 
+	vaddr = pci_ioremap_bar(pdev, 0);
+	if (vaddr == NULL) {
+		rc = -ENOMEM;
+		goto out_disable;
+	}
+	writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	iounmap(vaddr);
+
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
@@ -6453,14 +6389,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * "performant mode".  Or, it might be 640x, which can't reset
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
-	if (rc) {
-		if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
-			rc = -ENODEV;
+	if (rc)
 		goto out_disable;
-	}
 
 	/* Now try to get the controller to respond to a no-op */
-	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
+	dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n");
 	for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
 		if (hpsa_noop(pdev) == 0)
 			break;
@@ -6490,9 +6423,12 @@ static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
 	    || (h->cmd_pool == NULL)
 	    || (h->errinfo_pool == NULL)) {
 		dev_err(&h->pdev->dev, "out of memory in %s", __func__);
-		return -ENOMEM;
+		goto clean_up;
 	}
 	return 0;
+clean_up:
+	hpsa_free_cmd_pool(h);
+	return -ENOMEM;
 }
 
 static void hpsa_free_cmd_pool(struct ctlr_info *h)
@@ -6519,16 +6455,38 @@ static void hpsa_free_cmd_pool(struct ctlr_info *h)
 
 static void hpsa_irq_affinity_hints(struct ctlr_info *h)
 {
-	int i, cpu, rc;
+	int i, cpu;
 
 	cpu = cpumask_first(cpu_online_mask);
 	for (i = 0; i < h->msix_vector; i++) {
-		rc = irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu));
+		irq_set_affinity_hint(h->intr[i], get_cpu_mask(cpu));
 		cpu = cpumask_next(cpu, cpu_online_mask);
 	}
 }
 
-static int hpsa_request_irq(struct ctlr_info *h,
+/* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */
+static void hpsa_free_irqs(struct ctlr_info *h)
+{
+	int i;
+
+	if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) {
+		/* Single reply queue, only one irq to free */
+		i = h->intr_mode;
+		irq_set_affinity_hint(h->intr[i], NULL);
+		free_irq(h->intr[i], &h->q[i]);
+		return;
+	}
+
+	for (i = 0; i < h->msix_vector; i++) {
+		irq_set_affinity_hint(h->intr[i], NULL);
+		free_irq(h->intr[i], &h->q[i]);
+	}
+	for (; i < MAX_REPLY_QUEUES; i++)
+		h->q[i] = 0;
+}
+
+/* returns 0 on success; cleans up and returns -Enn on error */
+static int hpsa_request_irqs(struct ctlr_info *h,
 	irqreturn_t (*msixhandler)(int, void *),
 	irqreturn_t (*intxhandler)(int, void *))
 {
@@ -6543,10 +6501,25 @@ static int hpsa_request_irq(struct ctlr_info *h,
 
 	if (h->intr_mode == PERF_MODE_INT && h->msix_vector > 0) {
 		/* If performant mode and MSI-X, use multiple reply queues */
-		for (i = 0; i < h->msix_vector; i++)
+		for (i = 0; i < h->msix_vector; i++) {
 			rc = request_irq(h->intr[i], msixhandler,
 					0, h->devname,
 					&h->q[i]);
+			if (rc) {
+				int j;
+
+				dev_err(&h->pdev->dev,
+					"failed to get irq %d for %s\n",
+				       h->intr[i], h->devname);
+				for (j = 0; j < i; j++) {
+					free_irq(h->intr[j], &h->q[j]);
+					h->q[j] = 0;
+				}
+				for (; j < MAX_REPLY_QUEUES; j++)
+					h->q[j] = 0;
+				return rc;
+			}
+		}
 		hpsa_irq_affinity_hints(h);
 	} else {
 		/* Use single reply pool */
@@ -6592,27 +6565,9 @@ static int hpsa_kdump_soft_reset(struct ctlr_info *h)
 	return 0;
 }
 
-static void free_irqs(struct ctlr_info *h)
-{
-	int i;
-
-	if (!h->msix_vector || h->intr_mode != PERF_MODE_INT) {
-		/* Single reply queue, only one irq to free */
-		i = h->intr_mode;
-		irq_set_affinity_hint(h->intr[i], NULL);
-		free_irq(h->intr[i], &h->q[i]);
-		return;
-	}
-
-	for (i = 0; i < h->msix_vector; i++) {
-		irq_set_affinity_hint(h->intr[i], NULL);
-		free_irq(h->intr[i], &h->q[i]);
-	}
-}
-
 static void hpsa_free_irqs_and_disable_msix(struct ctlr_info *h)
 {
-	free_irqs(h);
+	hpsa_free_irqs(h);
 #ifdef CONFIG_PCI_MSI
 	if (h->msix_vector) {
 		if (h->pdev->msix_enabled)
@@ -6658,16 +6613,20 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 }
 
 /* Called when controller lockup detected. */
-static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list)
+static void fail_all_outstanding_cmds(struct ctlr_info *h)
 {
-	struct CommandList *c = NULL;
+	int i, refcount;
+	struct CommandList *c;
 
-	assert_spin_locked(&h->lock);
-	/* Mark all outstanding commands as failed and complete them. */
-	while (!list_empty(list)) {
-		c = list_entry(list->next, struct CommandList, list);
-		c->err_info->CommandStatus = CMD_HARDWARE_ERR;
-		finish_cmd(c);
+	flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */
+	for (i = 0; i < h->nr_cmds; i++) {
+		c = h->cmd_pool + i;
+		refcount = atomic_inc_return(&c->refcount);
+		if (refcount > 1) {
+			c->err_info->CommandStatus = CMD_HARDWARE_ERR;
+			finish_cmd(c);
+		}
+		cmd_free(h, c);
 	}
 }
 
@@ -6704,10 +6663,7 @@ static void controller_lockup_detected(struct ctlr_info *h)
 	dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n",
 			lockup_detected);
 	pci_disable_device(h->pdev);
-	spin_lock_irqsave(&h->lock, flags);
-	fail_all_cmds_on_list(h, &h->cmpQ);
-	fail_all_cmds_on_list(h, &h->reqQ);
-	spin_unlock_irqrestore(&h->lock, flags);
+	fail_all_outstanding_cmds(h);
 }
 
 static void detect_controller_lockup(struct ctlr_info *h)
@@ -6750,8 +6706,8 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
 	int i;
 	char *event_type;
 
-	/* Clear the driver-requested rescan flag */
-	h->drv_req_rescan = 0;
+	if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
+		return;
 
 	/* Ask the controller to clear the events we're handling. */
 	if ((h->transMethod & (CFGTBL_Trans_io_accel1
@@ -6798,9 +6754,6 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
  */
 static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
 {
-	if (h->drv_req_rescan)
-		return 1;
-
 	if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
 		return 0;
 
@@ -6834,34 +6787,60 @@ static int hpsa_offline_devices_ready(struct ctlr_info *h)
 	return 0;
 }
 
-
-static void hpsa_monitor_ctlr_worker(struct work_struct *work)
+static void hpsa_rescan_ctlr_worker(struct work_struct *work)
 {
 	unsigned long flags;
 	struct ctlr_info *h = container_of(to_delayed_work(work),
-					struct ctlr_info, monitor_ctlr_work);
-	detect_controller_lockup(h);
-	if (lockup_detected(h))
+					struct ctlr_info, rescan_ctlr_work);
+
+
+	if (h->remove_in_progress)
 		return;
 
 	if (hpsa_ctlr_needs_rescan(h) || hpsa_offline_devices_ready(h)) {
 		scsi_host_get(h->scsi_host);
-		h->drv_req_rescan = 0;
 		hpsa_ack_ctlr_events(h);
 		hpsa_scan_start(h->scsi_host);
 		scsi_host_put(h->scsi_host);
 	}
-
 	spin_lock_irqsave(&h->lock, flags);
-	if (h->remove_in_progress) {
-		spin_unlock_irqrestore(&h->lock, flags);
+	if (!h->remove_in_progress)
+		queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
+				h->heartbeat_sample_interval);
+	spin_unlock_irqrestore(&h->lock, flags);
+}
+
+static void hpsa_monitor_ctlr_worker(struct work_struct *work)
+{
+	unsigned long flags;
+	struct ctlr_info *h = container_of(to_delayed_work(work),
+					struct ctlr_info, monitor_ctlr_work);
+
+	detect_controller_lockup(h);
+	if (lockup_detected(h))
 		return;
-	}
-	schedule_delayed_work(&h->monitor_ctlr_work,
+
+	spin_lock_irqsave(&h->lock, flags);
+	if (!h->remove_in_progress)
+		schedule_delayed_work(&h->monitor_ctlr_work,
 				h->heartbeat_sample_interval);
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
+static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
+						char *name)
+{
+	struct workqueue_struct *wq = NULL;
+	char wq_name[20];
+
+	snprintf(wq_name, sizeof(wq_name), "%s_%d_hpsa", name, h->ctlr);
+	wq = alloc_ordered_workqueue(wq_name, 0);
+	if (!wq)
+		dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name);
+
+	return wq;
+}
+
 static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int dac, rc;
@@ -6898,13 +6877,23 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	h->pdev = pdev;
 	h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
-	INIT_LIST_HEAD(&h->cmpQ);
-	INIT_LIST_HEAD(&h->reqQ);
 	INIT_LIST_HEAD(&h->offline_device_list);
 	spin_lock_init(&h->lock);
 	spin_lock_init(&h->offline_device_lock);
 	spin_lock_init(&h->scan_lock);
-	spin_lock_init(&h->passthru_count_lock);
+	atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
+
+	h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
+	if (!h->rescan_ctlr_wq) {
+		rc = -ENOMEM;
+		goto clean1;
+	}
+
+	h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
+	if (!h->resubmit_wq) {
+		rc = -ENOMEM;
+		goto clean1;
+	}
 
 	/* Allocate and clear per-cpu variable lockup_detected */
 	h->lockup_detected = alloc_percpu(u32);
@@ -6939,13 +6928,14 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* make sure the board interrupts are off */
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
 
-	if (hpsa_request_irq(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
+	if (hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx))
 		goto clean2;
 	dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
 	       h->devname, pdev->device,
 	       h->intr[h->intr_mode], dac ? "" : " not");
-	if (hpsa_allocate_cmd_pool(h))
-		goto clean4;
+	rc = hpsa_allocate_cmd_pool(h);
+	if (rc)
+		goto clean2_and_free_irqs;
 	if (hpsa_allocate_sg_chain_blocks(h))
 		goto clean4;
 	init_waitqueue_head(&h->scan_wait_queue);
@@ -6974,12 +6964,12 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		spin_lock_irqsave(&h->lock, flags);
 		h->access.set_intr_mask(h, HPSA_INTR_OFF);
 		spin_unlock_irqrestore(&h->lock, flags);
-		free_irqs(h);
-		rc = hpsa_request_irq(h, hpsa_msix_discard_completions,
+		hpsa_free_irqs(h);
+		rc = hpsa_request_irqs(h, hpsa_msix_discard_completions,
 					hpsa_intx_discard_completions);
 		if (rc) {
-			dev_warn(&h->pdev->dev, "Failed to request_irq after "
-				"soft reset.\n");
+			dev_warn(&h->pdev->dev,
+				"Failed to request_irq after soft reset.\n");
 			goto clean4;
 		}
 
@@ -7016,7 +7006,6 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/* Enable Accelerated IO path at driver layer */
 		h->acciopath_status = 1;
 
-	h->drv_req_rescan = 0;
 
 	/* Turn the interrupts on so we can service requests */
 	h->access.set_intr_mask(h, HPSA_INTR_ON);
@@ -7029,14 +7018,22 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
 	schedule_delayed_work(&h->monitor_ctlr_work,
 				h->heartbeat_sample_interval);
+	INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
+	queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
+				h->heartbeat_sample_interval);
 	return 0;
 
 clean4:
 	hpsa_free_sg_chain_blocks(h);
 	hpsa_free_cmd_pool(h);
-	free_irqs(h);
+clean2_and_free_irqs:
+	hpsa_free_irqs(h);
 clean2:
 clean1:
+	if (h->resubmit_wq)
+		destroy_workqueue(h->resubmit_wq);
+	if (h->rescan_ctlr_wq)
+		destroy_workqueue(h->rescan_ctlr_wq);
 	if (h->lockup_detected)
 		free_percpu(h->lockup_detected);
 	kfree(h);
@@ -7055,9 +7052,9 @@ static void hpsa_flush_cache(struct ctlr_info *h)
 	if (!flush_buf)
 		return;
 
-	c = cmd_special_alloc(h);
+	c = cmd_alloc(h);
 	if (!c) {
-		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		dev_warn(&h->pdev->dev, "cmd_alloc returned NULL!\n");
 		goto out_of_memory;
 	}
 	if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
@@ -7069,7 +7066,7 @@ static void hpsa_flush_cache(struct ctlr_info *h)
 out:
 		dev_warn(&h->pdev->dev,
 			"error flushing cache on controller\n");
-	cmd_special_free(h, c);
+	cmd_free(h, c);
 out_of_memory:
 	kfree(flush_buf);
 }
@@ -7110,9 +7107,11 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	/* Get rid of any controller monitoring work items */
 	spin_lock_irqsave(&h->lock, flags);
 	h->remove_in_progress = 1;
-	cancel_delayed_work(&h->monitor_ctlr_work);
 	spin_unlock_irqrestore(&h->lock, flags);
-
+	cancel_delayed_work_sync(&h->monitor_ctlr_work);
+	cancel_delayed_work_sync(&h->rescan_ctlr_work);
+	destroy_workqueue(h->rescan_ctlr_wq);
+	destroy_workqueue(h->resubmit_wq);
 	hpsa_unregister_scsi(h);	/* unhook from SCSI subsystem */
 	hpsa_shutdown(pdev);
 	iounmap(h->vaddr);
@@ -7172,7 +7171,7 @@ static struct pci_driver hpsa_pci_driver = {
  * bits of the command address.
  */
 static void  calc_bucket_map(int bucket[], int num_buckets,
-	int nsgs, int min_blocks, int *bucket_map)
+	int nsgs, int min_blocks, u32 *bucket_map)
 {
 	int i, j, b, size;
 
@@ -7193,7 +7192,8 @@ static void  calc_bucket_map(int bucket[], int num_buckets,
 	}
 }
 
-static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
+/* return -ENODEV or other reason on error, 0 on success */
+static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 {
 	int i;
 	unsigned long register_value;
@@ -7285,12 +7285,16 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 		}
 	}
 	writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
-	hpsa_wait_for_mode_change_ack(h);
+	if (hpsa_wait_for_mode_change_ack(h)) {
+		dev_err(&h->pdev->dev,
+			"performant mode problem - doorbell timeout\n");
+		return -ENODEV;
+	}
 	register_value = readl(&(h->cfgtable->TransportActive));
 	if (!(register_value & CFGTBL_Trans_Performant)) {
-		dev_warn(&h->pdev->dev, "unable to get board into"
-					" performant mode\n");
-		return;
+		dev_err(&h->pdev->dev,
+			"performant mode problem - transport not active\n");
+		return -ENODEV;
 	}
 	/* Change the access methods to the performant access methods */
 	h->access = access;
@@ -7298,7 +7302,7 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 
 	if (!((trans_support & CFGTBL_Trans_io_accel1) ||
 		(trans_support & CFGTBL_Trans_io_accel2)))
-		return;
+		return 0;
 
 	if (trans_support & CFGTBL_Trans_io_accel1) {
 		/* Set up I/O accelerator mode */
@@ -7328,12 +7332,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 					(i * sizeof(struct ErrorInfo)));
 			cp->err_info_len = sizeof(struct ErrorInfo);
 			cp->sgl_offset = IOACCEL1_SGLOFFSET;
-			cp->host_context_flags = IOACCEL1_HCFLAGS_CISS_FORMAT;
+			cp->host_context_flags =
+				cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT);
 			cp->timeout_sec = 0;
 			cp->ReplyQueue = 0;
 			cp->tag =
-				cpu_to_le64((i << DIRECT_LOOKUP_SHIFT) |
-						DIRECT_LOOKUP_BIT);
+				cpu_to_le64((i << DIRECT_LOOKUP_SHIFT));
 			cp->host_addr =
 				cpu_to_le64(h->ioaccel_cmd_pool_dhandle +
 					(i * sizeof(struct io_accel1_cmd)));
@@ -7362,7 +7366,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
 			writel(bft2[i], &h->ioaccel2_bft2_regs[i]);
 	}
 	writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
-	hpsa_wait_for_mode_change_ack(h);
+	if (hpsa_wait_for_mode_change_ack(h)) {
+		dev_err(&h->pdev->dev,
+			"performant mode problem - enabling ioaccel mode\n");
+		return -ENODEV;
+	}
+	return 0;
 }
 
 static int hpsa_alloc_ioaccel_cmd_and_bft(struct ctlr_info *h)
@@ -7508,17 +7517,18 @@ static int is_accelerated_cmd(struct CommandList *c)
 static void hpsa_drain_accel_commands(struct ctlr_info *h)
 {
 	struct CommandList *c = NULL;
-	unsigned long flags;
-	int accel_cmds_out;
+	int i, accel_cmds_out;
+	int refcount;
 
-	do { /* wait for all outstanding commands to drain out */
+	do { /* wait for all outstanding ioaccel commands to drain out */
 		accel_cmds_out = 0;
-		spin_lock_irqsave(&h->lock, flags);
-		list_for_each_entry(c, &h->cmpQ, list)
-			accel_cmds_out += is_accelerated_cmd(c);
-		list_for_each_entry(c, &h->reqQ, list)
-			accel_cmds_out += is_accelerated_cmd(c);
-		spin_unlock_irqrestore(&h->lock, flags);
+		for (i = 0; i < h->nr_cmds; i++) {
+			c = h->cmd_pool + i;
+			refcount = atomic_inc_return(&c->refcount);
+			if (refcount > 1) /* Command is allocated */
+				accel_cmds_out += is_accelerated_cmd(c);
+			cmd_free(h, c);
+		}
 		if (accel_cmds_out <= 0)
 			break;
 		msleep(100);

drivers/scsi/hpsa.h

@@ -32,7 +32,6 @@ struct access_method {
 	void (*submit_command)(struct ctlr_info *h,
 		struct CommandList *c);
 	void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
-	unsigned long (*fifo_full)(struct ctlr_info *h);
 	bool (*intr_pending)(struct ctlr_info *h);
 	unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
 };
@@ -47,6 +46,11 @@ struct hpsa_scsi_dev_t {
 	unsigned char model[16];        /* bytes 16-31 of inquiry data */
 	unsigned char raid_level;	/* from inquiry page 0xC1 */
 	unsigned char volume_offline;	/* discovered via TUR or VPD */
+	u16 queue_depth;		/* max queue_depth for this device */
+	atomic_t ioaccel_cmds_out;	/* Only used for physical devices
+					 * counts commands sent to physical
+					 * device via "ioaccel" path.
+					 */
 	u32 ioaccel_handle;
 	int offload_config;		/* I/O accel RAID offload configured */
 	int offload_enabled;		/* I/O accel RAID offload enabled */
@@ -55,6 +59,15 @@ struct hpsa_scsi_dev_t {
 					 */
 	struct raid_map_data raid_map;	/* I/O accelerator RAID map */
 
+	/*
+	 * Pointers from logical drive map indices to the phys drives that
+	 * make those logical drives.  Note, multiple logical drives may
+	 * share physical drives.  You can have for instance 5 physical
+	 * drives with 3 logical drives each using those same 5 physical
+	 * disks. We need these pointers for counting i/o's out to physical
+	 * devices in order to honor physical device queue depth limits.
+	 */
+	struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
 };
 
 struct reply_queue_buffer {
@@ -115,9 +128,12 @@ struct ctlr_info {
 	void __iomem *vaddr;
 	unsigned long paddr;
 	int 	nr_cmds; /* Number of commands allowed on this controller */
+#define HPSA_CMDS_RESERVED_FOR_ABORTS 2
+#define HPSA_CMDS_RESERVED_FOR_DRIVER 1
 	struct CfgTable __iomem *cfgtable;
 	int	interrupts_enabled;
 	int 	max_commands;
+	int last_allocation;
 	atomic_t commands_outstanding;
 #	define PERF_MODE_INT	0
 #	define DOORBELL_INT	1
@@ -131,8 +147,6 @@ struct ctlr_info {
 	char hba_mode_enabled;
 
 	/* queue and queue Info */
-	struct list_head reqQ;
-	struct list_head cmpQ;
 	unsigned int Qdepth;
 	unsigned int maxSG;
 	spinlock_t lock;
@@ -168,9 +182,8 @@ struct ctlr_info {
 	unsigned long transMethod;
 
 	/* cap concurrent passthrus at some reasonable maximum */
-#define HPSA_MAX_CONCURRENT_PASSTHRUS (20)
-	spinlock_t passthru_count_lock; /* protects passthru_count */
-	int passthru_count;
+#define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
+	atomic_t passthru_cmds_avail;
 
 	/*
 	 * Performant mode completion buffers
@@ -194,8 +207,8 @@ struct ctlr_info {
 	atomic_t firmware_flash_in_progress;
 	u32 __percpu *lockup_detected;
 	struct delayed_work monitor_ctlr_work;
+	struct delayed_work rescan_ctlr_work;
 	int remove_in_progress;
-	u32 fifo_recently_full;
 	/* Address of h->q[x] is passed to intr handler to know which queue */
 	u8 q[MAX_REPLY_QUEUES];
 	u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
@@ -237,8 +250,9 @@ struct ctlr_info {
 	spinlock_t offline_device_lock;
 	struct list_head offline_device_list;
 	int	acciopath_status;
-	int	drv_req_rescan;	/* flag for driver to request rescan event */
 	int	raid_offload_debug;
+	struct workqueue_struct *resubmit_wq;
+	struct workqueue_struct *rescan_ctlr_wq;
 };
 
 struct offline_device_entry {
@@ -297,6 +311,8 @@ struct offline_device_entry {
  */
 #define SA5_DOORBELL	0x20
 #define SA5_REQUEST_PORT_OFFSET	0x40
+#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0
+#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4
 #define SA5_REPLY_INTR_MASK_OFFSET	0x34
 #define SA5_REPLY_PORT_OFFSET		0x44
 #define SA5_INTR_STATUS		0x30
@@ -353,10 +369,7 @@ static void SA5_submit_command_no_read(struct ctlr_info *h,
 static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
 	struct CommandList *c)
 {
-	if (c->cmd_type == CMD_IOACCEL2)
-		writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
-	else
-		writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
+	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 }
 
 /*
@@ -398,19 +411,19 @@ static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
 	unsigned long register_value = FIFO_EMPTY;
 
 	/* msi auto clears the interrupt pending bit. */
-	if (!(h->msi_vector || h->msix_vector)) {
+	if (unlikely(!(h->msi_vector || h->msix_vector))) {
 		/* flush the controller write of the reply queue by reading
 		 * outbound doorbell status register.
 		 */
-		register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+		(void) readl(h->vaddr + SA5_OUTDB_STATUS);
 		writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
 		/* Do a read in order to flush the write to the controller
 		 * (as per spec.)
 		 */
-		register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+		(void) readl(h->vaddr + SA5_OUTDB_STATUS);
 	}
 
-	if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
+	if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) {
 		register_value = rq->head[rq->current_entry];
 		rq->current_entry++;
 		atomic_dec(&h->commands_outstanding);
@@ -425,14 +438,6 @@ static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
 	return register_value;
 }
 
-/*
- *  Returns true if fifo is full.
- *
- */
-static unsigned long SA5_fifo_full(struct ctlr_info *h)
-{
-	return atomic_read(&h->commands_outstanding) >= h->max_commands;
-}
 /*
  *   returns value read from hardware.
  *     returns FIFO_EMPTY if there is nothing to read
@@ -473,9 +478,6 @@ static bool SA5_performant_intr_pending(struct ctlr_info *h)
 	if (!register_value)
 		return false;
 
-	if (h->msi_vector || h->msix_vector)
-		return true;
-
 	/* Read outbound doorbell to flush */
 	register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 	return register_value & SA5_OUTDB_STATUS_PERF_BIT;
@@ -525,7 +527,6 @@ static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
 static struct access_method SA5_access = {
 	SA5_submit_command,
 	SA5_intr_mask,
-	SA5_fifo_full,
 	SA5_intr_pending,
 	SA5_completed,
 };
@@ -533,7 +534,6 @@ static struct access_method SA5_access = {
 static struct access_method SA5_ioaccel_mode1_access = {
 	SA5_submit_command,
 	SA5_performant_intr_mask,
-	SA5_fifo_full,
 	SA5_ioaccel_mode1_intr_pending,
 	SA5_ioaccel_mode1_completed,
 };
@@ -541,7 +541,6 @@ static struct access_method SA5_ioaccel_mode1_access = {
 static struct access_method SA5_ioaccel_mode2_access = {
 	SA5_submit_command_ioaccel2,
 	SA5_performant_intr_mask,
-	SA5_fifo_full,
 	SA5_performant_intr_pending,
 	SA5_performant_completed,
 };
@@ -549,7 +548,6 @@ static struct access_method SA5_ioaccel_mode2_access = {
 static struct access_method SA5_performant_access = {
 	SA5_submit_command,
 	SA5_performant_intr_mask,
-	SA5_fifo_full,
 	SA5_performant_intr_pending,
 	SA5_performant_completed,
 };
@@ -557,7 +555,6 @@ static struct access_method SA5_performant_access = {
 static struct access_method SA5_performant_access_no_read = {
 	SA5_submit_command_no_read,
 	SA5_performant_intr_mask,
-	SA5_fifo_full,
 	SA5_performant_intr_pending,
 	SA5_performant_completed,
 };

drivers/scsi/hpsa_cmd.h

@@ -206,27 +206,27 @@ struct raid_map_disk_data {
 };
 
 struct raid_map_data {
-	u32   structure_size;		/* Size of entire structure in bytes */
-	u32   volume_blk_size;		/* bytes / block in the volume */
-	u64   volume_blk_cnt;		/* logical blocks on the volume */
+	__le32   structure_size;	/* Size of entire structure in bytes */
+	__le32   volume_blk_size;	/* bytes / block in the volume */
+	__le64   volume_blk_cnt;	/* logical blocks on the volume */
 	u8    phys_blk_shift;		/* Shift factor to convert between
 					 * units of logical blocks and physical
 					 * disk blocks */
 	u8    parity_rotation_shift;	/* Shift factor to convert between units
 					 * of logical stripes and physical
 					 * stripes */
-	u16   strip_size;		/* blocks used on each disk / stripe */
-	u64   disk_starting_blk;	/* First disk block used in volume */
-	u64   disk_blk_cnt;		/* disk blocks used by volume / disk */
-	u16   data_disks_per_row;	/* data disk entries / row in the map */
-	u16   metadata_disks_per_row;	/* mirror/parity disk entries / row
+	__le16   strip_size;		/* blocks used on each disk / stripe */
+	__le64   disk_starting_blk;	/* First disk block used in volume */
+	__le64   disk_blk_cnt;		/* disk blocks used by volume / disk */
+	__le16   data_disks_per_row;	/* data disk entries / row in the map */
+	__le16   metadata_disks_per_row;/* mirror/parity disk entries / row
 					 * in the map */
-	u16   row_cnt;			/* rows in each layout map */
-	u16   layout_map_count;		/* layout maps (1 map per mirror/parity
+	__le16   row_cnt;		/* rows in each layout map */
+	__le16   layout_map_count;	/* layout maps (1 map per mirror/parity
 					 * group) */
-	u16   flags;			/* Bit 0 set if encryption enabled */
+	__le16   flags;			/* Bit 0 set if encryption enabled */
 #define RAID_MAP_FLAG_ENCRYPT_ON  0x01
-	u16   dekindex;			/* Data encryption key index. */
+	__le16   dekindex;		/* Data encryption key index. */
 	u8    reserved[16];
 	struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
 };
@@ -240,6 +240,10 @@ struct ReportLUNdata {
 
 struct ext_report_lun_entry {
 	u8 lunid[8];
+#define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F)
+#define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6])
+#define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \
+			GET_BMIC_LEVEL_TWO_TARGET((lunid)))
 	u8 wwid[8];
 	u8 device_type;
 	u8 device_flags;
@@ -268,6 +272,7 @@ struct SenseSubsystem_info {
 #define HPSA_CACHE_FLUSH 0x01	/* C2 was already being used by HPSA */
 #define BMIC_FLASH_FIRMWARE 0xF7
 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
+#define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
 
 /* Command List Structure */
 union SCSI3Addr {
@@ -313,8 +318,8 @@ union LUNAddr {
 struct CommandListHeader {
 	u8              ReplyQueue;
 	u8              SGList;
-	u16             SGTotal;
-	u64		tag;
+	__le16          SGTotal;
+	__le64		tag;
 	union LUNAddr     LUN;
 };
 
@@ -338,14 +343,14 @@ struct RequestBlock {
 };
 
 struct ErrDescriptor {
-	u64 Addr;
-	u32  Len;
+	__le64 Addr;
+	__le32 Len;
 };
 
 struct SGDescriptor {
-	u64 Addr;
-	u32  Len;
-	u32  Ext;
+	__le64 Addr;
+	__le32 Len;
+	__le32 Ext;
 };
 
 union MoreErrInfo {
@@ -375,22 +380,19 @@ struct ErrorInfo {
 #define CMD_IOACCEL1	0x04
 #define CMD_IOACCEL2	0x05
 
-#define DIRECT_LOOKUP_SHIFT 5
-#define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_SHIFT 4
 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
 
 #define HPSA_ERROR_BIT          0x02
 struct ctlr_info; /* defined in hpsa.h */
-/* The size of this structure needs to be divisible by 32
- * on all architectures because low 5 bits of the addresses
+/* The size of this structure needs to be divisible by 128
+ * on all architectures.  The low 4 bits of the addresses
  * are used as follows:
  *
  * bit 0: to device, used to indicate "performant mode" command
  *        from device, indidcates error status.
  * bit 1-3: to device, indicates block fetch table entry for
  *          reducing DMA in fetching commands from host memory.
- * bit 4: used to indicate whether tag is "direct lookup" (index),
- *        or a bus address.
  */
 
 #define COMMANDLIST_ALIGNMENT 128
@@ -405,9 +407,21 @@ struct CommandList {
 	struct ctlr_info	   *h;
 	int			   cmd_type;
 	long			   cmdindex;
-	struct list_head list;
 	struct completion *waiting;
-	void   *scsi_cmd;
+	struct scsi_cmnd *scsi_cmd;
+	struct work_struct work;
+
+	/*
+	 * For commands using either of the two "ioaccel" paths to
+	 * bypass the RAID stack and go directly to the physical disk
+	 * phys_disk is a pointer to the hpsa_scsi_dev_t to which the
+	 * i/o is destined.  We need to store that here because the command
+	 * may potentially encounter TASK SET FULL and need to be resubmitted
+	 * For "normal" i/o's not using the "ioaccel" paths, phys_disk is
+	 * not used.
+	 */
+	struct hpsa_scsi_dev_t *phys_disk;
+	atomic_t refcount; /* Must be last to avoid memset in cmd_alloc */
 } __aligned(COMMANDLIST_ALIGNMENT);
 
 /* Max S/G elements in I/O accelerator command */
@@ -420,7 +434,7 @@ struct CommandList {
  */
 #define IOACCEL1_COMMANDLIST_ALIGNMENT 128
 struct io_accel1_cmd {
-	u16 dev_handle;			/* 0x00 - 0x01 */
+	__le16 dev_handle;		/* 0x00 - 0x01 */
 	u8  reserved1;			/* 0x02 */
 	u8  function;			/* 0x03 */
 	u8  reserved2[8];		/* 0x04 - 0x0B */
@@ -430,20 +444,20 @@ struct io_accel1_cmd {
 	u8  reserved4;			/* 0x13 */
 	u8  sgl_offset;			/* 0x14 */
 	u8  reserved5[7];		/* 0x15 - 0x1B */
-	u32 transfer_len;		/* 0x1C - 0x1F */
+	__le32 transfer_len;		/* 0x1C - 0x1F */
 	u8  reserved6[4];		/* 0x20 - 0x23 */
-	u16 io_flags;			/* 0x24 - 0x25 */
+	__le16 io_flags;		/* 0x24 - 0x25 */
 	u8  reserved7[14];		/* 0x26 - 0x33 */
 	u8  LUN[8];			/* 0x34 - 0x3B */
-	u32 control;			/* 0x3C - 0x3F */
+	__le32 control;			/* 0x3C - 0x3F */
 	u8  CDB[16];			/* 0x40 - 0x4F */
 	u8  reserved8[16];		/* 0x50 - 0x5F */
-	u16 host_context_flags;		/* 0x60 - 0x61 */
-	u16 timeout_sec;		/* 0x62 - 0x63 */
+	__le16 host_context_flags;	/* 0x60 - 0x61 */
+	__le16 timeout_sec;		/* 0x62 - 0x63 */
 	u8  ReplyQueue;			/* 0x64 */
 	u8  reserved9[3];		/* 0x65 - 0x67 */
-	u64 tag;			/* 0x68 - 0x6F */
-	u64 host_addr;			/* 0x70 - 0x77 */
+	__le64 tag;			/* 0x68 - 0x6F */
+	__le64 host_addr;		/* 0x70 - 0x77 */
 	u8  CISS_LUN[8];		/* 0x78 - 0x7F */
 	struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
 } __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
@@ -470,8 +484,8 @@ struct io_accel1_cmd {
 #define IOACCEL1_BUSADDR_CMDTYPE        0x00000060
 
 struct ioaccel2_sg_element {
-	u64 address;
-	u32 length;
+	__le64 address;
+	__le32 length;
 	u8 reserved[3];
 	u8 chain_indicator;
 #define IOACCEL2_CHAIN 0x80
@@ -526,20 +540,20 @@ struct io_accel2_cmd {
 					     /*     0=off, 1=on */
 	u8  reply_queue;		/* Reply Queue ID */
 	u8  reserved1;			/* Reserved */
-	u32 scsi_nexus;			/* Device Handle */
-	u32 Tag;			/* cciss tag, lower 4 bytes only */
-	u32 tweak_lower;		/* Encryption tweak, lower 4 bytes */
+	__le32 scsi_nexus;		/* Device Handle */
+	__le32 Tag;			/* cciss tag, lower 4 bytes only */
+	__le32 tweak_lower;		/* Encryption tweak, lower 4 bytes */
 	u8  cdb[16];			/* SCSI Command Descriptor Block */
 	u8  cciss_lun[8];		/* 8 byte SCSI address */
-	u32 data_len;			/* Total bytes to transfer */
+	__le32 data_len;		/* Total bytes to transfer */
 	u8  cmd_priority_task_attr;	/* priority and task attrs */
 #define IOACCEL2_PRIORITY_MASK 0x78
 #define IOACCEL2_ATTR_MASK 0x07
 	u8  sg_count;			/* Number of sg elements */
-	u16 dekindex;			/* Data encryption key index */
-	u64 err_ptr;			/* Error Pointer */
-	u32 err_len;			/* Error Length*/
-	u32 tweak_upper;		/* Encryption tweak, upper 4 bytes */
+	__le16 dekindex;		/* Data encryption key index */
+	__le64 err_ptr;			/* Error Pointer */
+	__le32 err_len;			/* Error Length*/
+	__le32 tweak_upper;		/* Encryption tweak, upper 4 bytes */
 	struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
 	struct io_accel2_scsi_response error_data;
 } __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
@@ -563,18 +577,18 @@ struct hpsa_tmf_struct {
 	u8 reserved1;		/* byte 3 Reserved */
 	u32 it_nexus;		/* SCSI I-T Nexus */
 	u8 lun_id[8];		/* LUN ID for TMF request */
-	u64 tag;		/* cciss tag associated w/ request */
-	u64 abort_tag;		/* cciss tag of SCSI cmd or task to abort */
-	u64 error_ptr;		/* Error Pointer */
-	u32 error_len;		/* Error Length */
+	__le64 tag;		/* cciss tag associated w/ request */
+	__le64 abort_tag;	/* cciss tag of SCSI cmd or TMF to abort */
+	__le64 error_ptr;		/* Error Pointer */
+	__le32 error_len;		/* Error Length */
 };
 
 /* Configuration Table Structure */
 struct HostWrite {
-	u32 TransportRequest;
-	u32 command_pool_addr_hi;
-	u32 CoalIntDelay;
-	u32 CoalIntCount;
+	__le32		TransportRequest;
+	__le32		command_pool_addr_hi;
+	__le32		CoalIntDelay;
+	__le32		CoalIntCount;
 };
 
 #define SIMPLE_MODE     0x02
@@ -585,54 +599,54 @@ struct HostWrite {
 #define DRIVER_SUPPORT_UA_ENABLE        0x00000001
 
 struct CfgTable {
-	u8            Signature[4];
-	u32		SpecValence;
-	u32           TransportSupport;
-	u32           TransportActive;
-	struct 		HostWrite HostWrite;
-	u32           CmdsOutMax;
-	u32           BusTypes;
-	u32           TransMethodOffset;
-	u8            ServerName[16];
-	u32           HeartBeat;
-	u32           driver_support;
-#define			ENABLE_SCSI_PREFETCH 0x100
-#define			ENABLE_UNIT_ATTN 0x01
-	u32	 	MaxScatterGatherElements;
-	u32		MaxLogicalUnits;
-	u32		MaxPhysicalDevices;
-	u32		MaxPhysicalDrivesPerLogicalUnit;
-	u32		MaxPerformantModeCommands;
-	u32		MaxBlockFetch;
-	u32		PowerConservationSupport;
-	u32		PowerConservationEnable;
-	u32		TMFSupportFlags;
+	u8		Signature[4];
+	__le32		SpecValence;
+	__le32		TransportSupport;
+	__le32		TransportActive;
+	struct HostWrite HostWrite;
+	__le32		CmdsOutMax;
+	__le32		BusTypes;
+	__le32		TransMethodOffset;
+	u8		ServerName[16];
+	__le32		HeartBeat;
+	__le32		driver_support;
+#define			ENABLE_SCSI_PREFETCH		0x100
+#define			ENABLE_UNIT_ATTN		0x01
+	__le32		MaxScatterGatherElements;
+	__le32		MaxLogicalUnits;
+	__le32		MaxPhysicalDevices;
+	__le32		MaxPhysicalDrivesPerLogicalUnit;
+	__le32		MaxPerformantModeCommands;
+	__le32		MaxBlockFetch;
+	__le32		PowerConservationSupport;
+	__le32		PowerConservationEnable;
+	__le32		TMFSupportFlags;
 	u8		TMFTagMask[8];
 	u8		reserved[0x78 - 0x70];
-	u32		misc_fw_support; /* offset 0x78 */
-#define			MISC_FW_DOORBELL_RESET (0x02)
-#define			MISC_FW_DOORBELL_RESET2 (0x010)
-#define			MISC_FW_RAID_OFFLOAD_BASIC (0x020)
-#define			MISC_FW_EVENT_NOTIFY (0x080)
+	__le32		misc_fw_support;		/* offset 0x78 */
+#define			MISC_FW_DOORBELL_RESET		0x02
+#define			MISC_FW_DOORBELL_RESET2		0x010
+#define			MISC_FW_RAID_OFFLOAD_BASIC	0x020
+#define			MISC_FW_EVENT_NOTIFY		0x080
 	u8		driver_version[32];
-	u32             max_cached_write_size;
-	u8              driver_scratchpad[16];
-	u32             max_error_info_length;
-	u32		io_accel_max_embedded_sg_count;
-	u32		io_accel_request_size_offset;
-	u32		event_notify;
-#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
-#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
-	u32		clear_event_notify;
+	__le32		max_cached_write_size;
+	u8		driver_scratchpad[16];
+	__le32		max_error_info_length;
+	__le32		io_accel_max_embedded_sg_count;
+	__le32		io_accel_request_size_offset;
+	__le32		event_notify;
+#define		HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
+#define		HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
+	__le32		clear_event_notify;
 };
 
 #define NUM_BLOCKFETCH_ENTRIES 8
 struct TransTable_struct {
-	u32            BlockFetch[NUM_BLOCKFETCH_ENTRIES];
-	u32            RepQSize;
-	u32            RepQCount;
-	u32            RepQCtrAddrLow32;
-	u32            RepQCtrAddrHigh32;
+	__le32		BlockFetch[NUM_BLOCKFETCH_ENTRIES];
+	__le32		RepQSize;
+	__le32		RepQCount;
+	__le32		RepQCtrAddrLow32;
+	__le32		RepQCtrAddrHigh32;
 #define MAX_REPLY_QUEUES 64
 	struct vals32  RepQAddr[MAX_REPLY_QUEUES];
 };
@@ -644,5 +658,137 @@ struct hpsa_pci_info {
 	u32		board_id;
 };
 
+struct bmic_identify_physical_device {
+	u8    scsi_bus;          /* SCSI Bus number on controller */
+	u8    scsi_id;           /* SCSI ID on this bus */
+	__le16 block_size;	     /* sector size in bytes */
+	__le32 total_blocks;	     /* number for sectors on drive */
+	__le32 reserved_blocks;   /* controller reserved (RIS) */
+	u8    model[40];         /* Physical Drive Model */
+	u8    serial_number[40]; /* Drive Serial Number */
+	u8    firmware_revision[8]; /* drive firmware revision */
+	u8    scsi_inquiry_bits; /* inquiry byte 7 bits */
+	u8    compaq_drive_stamp; /* 0 means drive not stamped */
+	u8    last_failure_reason;
+#define BMIC_LAST_FAILURE_TOO_SMALL_IN_LOAD_CONFIG		0x01
+#define BMIC_LAST_FAILURE_ERROR_ERASING_RIS			0x02
+#define BMIC_LAST_FAILURE_ERROR_SAVING_RIS			0x03
+#define BMIC_LAST_FAILURE_FAIL_DRIVE_COMMAND			0x04
+#define BMIC_LAST_FAILURE_MARK_BAD_FAILED			0x05
+#define BMIC_LAST_FAILURE_MARK_BAD_FAILED_IN_FINISH_REMAP	0x06
+#define BMIC_LAST_FAILURE_TIMEOUT				0x07
+#define BMIC_LAST_FAILURE_AUTOSENSE_FAILED			0x08
+#define BMIC_LAST_FAILURE_MEDIUM_ERROR_1			0x09
+#define BMIC_LAST_FAILURE_MEDIUM_ERROR_2			0x0a
+#define BMIC_LAST_FAILURE_NOT_READY_BAD_SENSE			0x0b
+#define BMIC_LAST_FAILURE_NOT_READY				0x0c
+#define BMIC_LAST_FAILURE_HARDWARE_ERROR			0x0d
+#define BMIC_LAST_FAILURE_ABORTED_COMMAND			0x0e
+#define BMIC_LAST_FAILURE_WRITE_PROTECTED			0x0f
+#define BMIC_LAST_FAILURE_SPIN_UP_FAILURE_IN_RECOVER		0x10
+#define BMIC_LAST_FAILURE_REBUILD_WRITE_ERROR			0x11
+#define BMIC_LAST_FAILURE_TOO_SMALL_IN_HOT_PLUG			0x12
+#define BMIC_LAST_FAILURE_BUS_RESET_RECOVERY_ABORTED		0x13
+#define BMIC_LAST_FAILURE_REMOVED_IN_HOT_PLUG			0x14
+#define BMIC_LAST_FAILURE_INIT_REQUEST_SENSE_FAILED		0x15
+#define BMIC_LAST_FAILURE_INIT_START_UNIT_FAILED		0x16
+#define BMIC_LAST_FAILURE_INQUIRY_FAILED			0x17
+#define BMIC_LAST_FAILURE_NON_DISK_DEVICE			0x18
+#define BMIC_LAST_FAILURE_READ_CAPACITY_FAILED			0x19
+#define BMIC_LAST_FAILURE_INVALID_BLOCK_SIZE			0x1a
+#define BMIC_LAST_FAILURE_HOT_PLUG_REQUEST_SENSE_FAILED		0x1b
+#define BMIC_LAST_FAILURE_HOT_PLUG_START_UNIT_FAILED		0x1c
+#define BMIC_LAST_FAILURE_WRITE_ERROR_AFTER_REMAP		0x1d
+#define BMIC_LAST_FAILURE_INIT_RESET_RECOVERY_ABORTED		0x1e
+#define BMIC_LAST_FAILURE_DEFERRED_WRITE_ERROR			0x1f
+#define BMIC_LAST_FAILURE_MISSING_IN_SAVE_RIS			0x20
+#define BMIC_LAST_FAILURE_WRONG_REPLACE				0x21
+#define BMIC_LAST_FAILURE_GDP_VPD_INQUIRY_FAILED		0x22
+#define BMIC_LAST_FAILURE_GDP_MODE_SENSE_FAILED			0x23
+#define BMIC_LAST_FAILURE_DRIVE_NOT_IN_48BIT_MODE		0x24
+#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_HOT_PLUG		0x25
+#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_LOAD_CFG		0x26
+#define BMIC_LAST_FAILURE_PROTOCOL_ADAPTER_FAILED		0x27
+#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_EMPTY			0x28
+#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_OCCUPIED		0x29
+#define BMIC_LAST_FAILURE_FAULTY_ID_INVALID_BAY			0x2a
+#define BMIC_LAST_FAILURE_WRITE_RETRIES_FAILED			0x2b
+
+#define BMIC_LAST_FAILURE_SMART_ERROR_REPORTED			0x37
+#define BMIC_LAST_FAILURE_PHY_RESET_FAILED			0x38
+#define BMIC_LAST_FAILURE_ONLY_ONE_CTLR_CAN_SEE_DRIVE		0x40
+#define BMIC_LAST_FAILURE_KC_VOLUME_FAILED			0x41
+#define BMIC_LAST_FAILURE_UNEXPECTED_REPLACEMENT		0x42
+#define BMIC_LAST_FAILURE_OFFLINE_ERASE				0x80
+#define BMIC_LAST_FAILURE_OFFLINE_TOO_SMALL			0x81
+#define BMIC_LAST_FAILURE_OFFLINE_DRIVE_TYPE_MIX		0x82
+#define BMIC_LAST_FAILURE_OFFLINE_ERASE_COMPLETE		0x83
+
+	u8     flags;
+	u8     more_flags;
+	u8     scsi_lun;          /* SCSI LUN for phys drive */
+	u8     yet_more_flags;
+	u8     even_more_flags;
+	__le32 spi_speed_rules;/* SPI Speed data:Ultra disable diagnose */
+	u8     phys_connector[2];         /* connector number on controller */
+	u8     phys_box_on_bus;  /* phys enclosure this drive resides */
+	u8     phys_bay_in_box;  /* phys drv bay this drive resides */
+	__le32 rpm;              /* Drive rotational speed in rpm */
+	u8     device_type;       /* type of drive */
+	u8     sata_version;     /* only valid when drive_type is SATA */
+	__le64 big_total_block_count;
+	__le64 ris_starting_lba;
+	__le32 ris_size;
+	u8     wwid[20];
+	u8     controller_phy_map[32];
+	__le16 phy_count;
+	u8     phy_connected_dev_type[256];
+	u8     phy_to_drive_bay_num[256];
+	__le16 phy_to_attached_dev_index[256];
+	u8     box_index;
+	u8     reserved;
+	__le16 extra_physical_drive_flags;
+#define BMIC_PHYS_DRIVE_SUPPORTS_GAS_GAUGE(idphydrv) \
+	(idphydrv->extra_physical_drive_flags & (1 << 10))
+	u8     negotiated_link_rate[256];
+	u8     phy_to_phy_map[256];
+	u8     redundant_path_present_map;
+	u8     redundant_path_failure_map;
+	u8     active_path_number;
+	__le16 alternate_paths_phys_connector[8];
+	u8     alternate_paths_phys_box_on_port[8];
+	u8     multi_lun_device_lun_count;
+	u8     minimum_good_fw_revision[8];
+	u8     unique_inquiry_bytes[20];
+	u8     current_temperature_degreesC;
+	u8     temperature_threshold_degreesC;
+	u8     max_temperature_degreesC;
+	u8     logical_blocks_per_phys_block_exp; /* phyblocksize = 512*2^exp */
+	__le16 current_queue_depth_limit;
+	u8     switch_name[10];
+	__le16 switch_port;
+	u8     alternate_paths_switch_name[40];
+	u8     alternate_paths_switch_port[8];
+	__le16 power_on_hours; /* valid only if gas gauge supported */
+	__le16 percent_endurance_used; /* valid only if gas gauge supported. */
+#define BMIC_PHYS_DRIVE_SSD_WEAROUT(idphydrv) \
+	((idphydrv->percent_endurance_used & 0x80) || \
+	 (idphydrv->percent_endurance_used > 10000))
+	u8     drive_authentication;
+#define BMIC_PHYS_DRIVE_AUTHENTICATED(idphydrv) \
+	(idphydrv->drive_authentication == 0x80)
+	u8     smart_carrier_authentication;
+#define BMIC_SMART_CARRIER_AUTHENTICATION_SUPPORTED(idphydrv) \
+	(idphydrv->smart_carrier_authentication != 0x0)
+#define BMIC_SMART_CARRIER_AUTHENTICATED(idphydrv) \
+	(idphydrv->smart_carrier_authentication == 0x01)
+	u8     smart_carrier_app_fw_version;
+	u8     smart_carrier_bootloader_fw_version;
+	u8     encryption_key_name[64];
+	__le32 misc_drive_flags;
+	__le16 dek_index;
+	u8     padding[112];
+};
+
 #pragma pack()
 #endif /* HPSA_CMD_H */

drivers/scsi/in2000.c

@@ -2226,36 +2226,36 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance)
 
 	if (hd->proc & PR_INFO) {
 		seq_printf(m, "\ndip_switch=%02x: irq=%d io=%02x floppy=%s sync/DOS5=%s", (hd->dip_switch & 0x7f), instance->irq, hd->io_base, (hd->dip_switch & 0x40) ? "Yes" : "No", (hd->dip_switch & 0x20) ? "Yes" : "No");
-		seq_printf(m, "\nsync_xfer[] =       ");
+		seq_puts(m, "\nsync_xfer[] =       ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%02x", hd->sync_xfer[x]);
-		seq_printf(m, "\nsync_stat[] =       ");
+		seq_puts(m, "\nsync_stat[] =       ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%02x", hd->sync_stat[x]);
 	}
 #ifdef PROC_STATISTICS
 	if (hd->proc & PR_STATISTICS) {
-		seq_printf(m, "\ncommands issued:    ");
+		seq_puts(m, "\ncommands issued:    ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%ld", hd->cmd_cnt[x]);
-		seq_printf(m, "\ndisconnects allowed:");
+		seq_puts(m, "\ndisconnects allowed:");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]);
-		seq_printf(m, "\ndisconnects done:   ");
+		seq_puts(m, "\ndisconnects done:   ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%ld", hd->disc_done_cnt[x]);
 		seq_printf(m, "\ninterrupts:      \t%ld", hd->int_cnt);
 	}
 #endif
 	if (hd->proc & PR_CONNECTED) {
-		seq_printf(m, "\nconnected:     ");
+		seq_puts(m, "\nconnected:     ");
 		if (hd->connected) {
 			cmd = (Scsi_Cmnd *) hd->connected;
 			seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
 		}
 	}
 	if (hd->proc & PR_INPUTQ) {
-		seq_printf(m, "\ninput_Q:       ");
+		seq_puts(m, "\ninput_Q:       ");
 		cmd = (Scsi_Cmnd *) hd->input_Q;
 		while (cmd) {
 			seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
@@ -2263,7 +2263,7 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance)
 		}
 	}
 	if (hd->proc & PR_DISCQ) {
-		seq_printf(m, "\ndisconnected_Q:");
+		seq_puts(m, "\ndisconnected_Q:");
 		cmd = (Scsi_Cmnd *) hd->disconnected_Q;
 		while (cmd) {
 			seq_printf(m, " %d:%llu(%02x)", cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
@@ -2273,7 +2273,7 @@ static int in2000_show_info(struct seq_file *m, struct Scsi_Host *instance)
 	if (hd->proc & PR_TEST) {
 		;		/* insert your own custom function here */
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 	spin_unlock_irqrestore(instance->host_lock, flags);
 #endif				/* PROC_INTERFACE */
 	return 0;

drivers/scsi/ips.c

@@ -2038,15 +2038,14 @@ ips_host_info(ips_ha_t *ha, struct seq_file *m)
 {
 	METHOD_TRACE("ips_host_info", 1);
 
-	seq_printf(m, "\nIBM ServeRAID General Information:\n\n");
+	seq_puts(m, "\nIBM ServeRAID General Information:\n\n");
 
 	if ((le32_to_cpu(ha->nvram->signature) == IPS_NVRAM_P5_SIG) &&
 	    (le16_to_cpu(ha->nvram->adapter_type) != 0))
 		seq_printf(m, "\tController Type                   : %s\n",
 			  ips_adapter_name[ha->ad_type - 1]);
 	else
-		seq_printf(m,
-			  "\tController Type                   : Unknown\n");
+		seq_puts(m, "\tController Type                   : Unknown\n");
 
 	if (ha->io_addr)
 		seq_printf(m,
@@ -2138,7 +2137,7 @@ ips_host_info(ips_ha_t *ha, struct seq_file *m)
 	seq_printf(m, "\tCurrent Active PT Commands        : %d\n",
 		  ha->num_ioctl);
 
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 
 	return 0;
 }

drivers/scsi/lpfc/lpfc_els.c

@@ -2225,6 +2225,15 @@ lpfc_adisc_done(struct lpfc_vport *vport)
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
 	    !(vport->fc_flag & FC_RSCN_MODE) &&
 	    (phba->sli_rev < LPFC_SLI_REV4)) {
+		/* The ADISCs are complete.  Doesn't matter if they
+		 * succeeded or failed because the ADISC completion
+		 * routine guarantees to call the state machine and
+		 * the RPI is either unregistered (failed ADISC response)
+		 * or the RPI is still valid and the node is marked
+		 * mapped for a target.  The exchanges should be in the
+		 * correct state. This code is specific to SLI3.
+		 */
+		lpfc_issue_clear_la(phba, vport);
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}

drivers/scsi/megaraid.c

@@ -2240,7 +2240,7 @@ proc_show_battery(struct seq_file *m, void *v)
 		goto free_pdev;
 
 	if( mega_adapinq(adapter, dma_handle) != 0 ) {
-		seq_printf(m, "Adapter inquiry failed.\n");
+		seq_puts(m, "Adapter inquiry failed.\n");
 		printk(KERN_WARNING "megaraid: inquiry failed.\n");
 		goto free_inquiry;
 	}

drivers/scsi/megaraid/megaraid_sas.h

@@ -35,7 +35,7 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"06.805.06.01-rc1"
+#define MEGASAS_VERSION				"06.806.08.00-rc1"
 
 /*
  * Device IDs
@@ -969,7 +969,20 @@ struct megasas_ctrl_info {
 
 	struct {
 #if defined(__BIG_ENDIAN_BITFIELD)
-		u32     reserved:25;
+		u32     reserved:12;
+		u32     discardCacheDuringLDDelete:1;
+		u32     supportSecurityonJBOD:1;
+		u32     supportCacheBypassModes:1;
+		u32     supportDisableSESMonitoring:1;
+		u32     supportForceFlash:1;
+		u32     supportNVDRAM:1;
+		u32     supportDrvActivityLEDSetting:1;
+		u32     supportAllowedOpsforDrvRemoval:1;
+		u32     supportHOQRebuild:1;
+		u32     supportForceTo512e:1;
+		u32     supportNVCacheErase:1;
+		u32     supportDebugQueue:1;
+		u32     supportSwZone:1;
 		u32     supportCrashDump:1;
 		u32     supportMaxExtLDs:1;
 		u32     supportT10RebuildAssist:1;
@@ -981,9 +994,22 @@ struct megasas_ctrl_info {
 		u32     supportThermalPollInterval:1;
 		u32     supportDisableImmediateIO:1;
 		u32     supportT10RebuildAssist:1;
-		u32     supportMaxExtLDs:1;
-		u32     supportCrashDump:1;
-		u32     reserved:25;
+		u32	supportMaxExtLDs:1;
+		u32	supportCrashDump:1;
+		u32     supportSwZone:1;
+		u32     supportDebugQueue:1;
+		u32     supportNVCacheErase:1;
+		u32     supportForceTo512e:1;
+		u32     supportHOQRebuild:1;
+		u32     supportAllowedOpsforDrvRemoval:1;
+		u32     supportDrvActivityLEDSetting:1;
+		u32     supportNVDRAM:1;
+		u32     supportForceFlash:1;
+		u32     supportDisableSESMonitoring:1;
+		u32     supportCacheBypassModes:1;
+		u32     supportSecurityonJBOD:1;
+		u32     discardCacheDuringLDDelete:1;
+		u32     reserved:12;
 #endif
 	} adapterOperations3;
 
@@ -1022,6 +1048,13 @@ enum MR_MFI_MPT_PTHR_FLAGS {
 	MFI_MPT_ATTACHED = 2,
 };
 
+enum MR_SCSI_CMD_TYPE {
+	READ_WRITE_LDIO = 0,
+	NON_READ_WRITE_LDIO = 1,
+	READ_WRITE_SYSPDIO = 2,
+	NON_READ_WRITE_SYSPDIO = 3,
+};
+
 /* Frame Type */
 #define IO_FRAME				0
 #define PTHRU_FRAME				1
@@ -1049,6 +1082,8 @@ enum MR_MFI_MPT_PTHR_FLAGS {
  */
 #define MEGASAS_INT_CMDS			32
 #define MEGASAS_SKINNY_INT_CMDS			5
+#define MEGASAS_FUSION_INTERNAL_CMDS		5
+#define MEGASAS_FUSION_IOCTL_CMDS		3
 
 #define MEGASAS_MAX_MSIX_QUEUES			128
 /*
@@ -1194,19 +1229,23 @@ union megasas_sgl_frame {
 typedef union _MFI_CAPABILITIES {
 	struct {
 #if   defined(__BIG_ENDIAN_BITFIELD)
-		u32     reserved:27;
+		u32     reserved:25;
+		u32     security_protocol_cmds_fw:1;
+		u32     support_core_affinity:1;
 		u32     support_ndrive_r1_lb:1;
 		u32	support_max_255lds:1;
-		u32	reserved1:1;
+		u32	support_fastpath_wb:1;
 		u32     support_additional_msix:1;
 		u32     support_fp_remote_lun:1;
 #else
 		u32     support_fp_remote_lun:1;
 		u32     support_additional_msix:1;
-		u32	reserved1:1;
+		u32	support_fastpath_wb:1;
 		u32	support_max_255lds:1;
 		u32     support_ndrive_r1_lb:1;
-		u32     reserved:27;
+		u32     support_core_affinity:1;
+		u32     security_protocol_cmds_fw:1;
+		u32     reserved:25;
 #endif
 	} mfi_capabilities;
 	u32     reg;
@@ -1638,20 +1677,20 @@ struct megasas_instance {
 	u32 crash_dump_fw_support;
 	u32 crash_dump_drv_support;
 	u32 crash_dump_app_support;
+	u32 secure_jbod_support;
 	spinlock_t crashdump_lock;
 
 	struct megasas_register_set __iomem *reg_set;
 	u32 *reply_post_host_index_addr[MR_MAX_MSIX_REG_ARRAY];
 	struct megasas_pd_list          pd_list[MEGASAS_MAX_PD];
 	struct megasas_pd_list          local_pd_list[MEGASAS_MAX_PD];
-	u8     ld_ids[MEGASAS_MAX_LD_IDS];
+	u8 ld_ids[MEGASAS_MAX_LD_IDS];
 	s8 init_id;
 
 	u16 max_num_sge;
 	u16 max_fw_cmds;
-	/* For Fusion its num IOCTL cmds, for others MFI based its
-	   max_fw_cmds */
 	u16 max_mfi_cmds;
+	u16 max_scsi_cmds;
 	u32 max_sectors_per_req;
 	struct megasas_aen_event *ev;
 
@@ -1727,7 +1766,7 @@ struct megasas_instance {
 	u8 requestorId;
 	char PlasmaFW111;
 	char mpio;
-	int throttlequeuedepth;
+	u16 throttlequeuedepth;
 	u8 mask_interrupts;
 	u8 is_imr;
 };
@@ -1946,5 +1985,6 @@ void __megasas_return_cmd(struct megasas_instance *instance,
 
 void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance,
 	struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion);
+int megasas_cmd_type(struct scsi_cmnd *cmd);
 
 #endif				/*LSI_MEGARAID_SAS_H */

drivers/scsi/megaraid/megaraid_sas_base.c

@@ -78,7 +78,7 @@ static int allow_vf_ioctls;
 module_param(allow_vf_ioctls, int, S_IRUGO);
 MODULE_PARM_DESC(allow_vf_ioctls, "Allow ioctls in SR-IOV VF mode. Default: 0");
 
-static int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
+static unsigned int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
 module_param(throttlequeuedepth, int, S_IRUGO);
 MODULE_PARM_DESC(throttlequeuedepth,
 	"Adapter queue depth when throttled due to I/O timeout. Default: 16");
@@ -1417,16 +1417,15 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 }
 
 /**
- * megasas_is_ldio -		Checks if the cmd is for logical drive
+ * megasas_cmd_type -		Checks if the cmd is for logical drive/sysPD
+ *				and whether it's RW or non RW
  * @scmd:			SCSI command
  *
- * Called by megasas_queue_command to find out if the command to be queued
- * is a logical drive command
  */
-inline int megasas_is_ldio(struct scsi_cmnd *cmd)
+inline int megasas_cmd_type(struct scsi_cmnd *cmd)
 {
-	if (!MEGASAS_IS_LOGICAL(cmd))
-		return 0;
+	int ret;
+
 	switch (cmd->cmnd[0]) {
 	case READ_10:
 	case WRITE_10:
@@ -1436,10 +1435,14 @@ inline int megasas_is_ldio(struct scsi_cmnd *cmd)
 	case WRITE_6:
 	case READ_16:
 	case WRITE_16:
-		return 1;
+		ret = (MEGASAS_IS_LOGICAL(cmd)) ?
+			READ_WRITE_LDIO : READ_WRITE_SYSPDIO;
+		break;
 	default:
-		return 0;
+		ret = (MEGASAS_IS_LOGICAL(cmd)) ?
+			NON_READ_WRITE_LDIO : NON_READ_WRITE_SYSPDIO;
 	}
+	return ret;
 }
 
  /**
@@ -1471,7 +1474,7 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
 		if(!cmd->scmd)
 			continue;
 		printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
-		if (megasas_is_ldio(cmd->scmd)){
+		if (megasas_cmd_type(cmd->scmd) == READ_WRITE_LDIO) {
 			ldio = (struct megasas_io_frame *)cmd->frame;
 			mfi_sgl = &ldio->sgl;
 			sgcount = ldio->sge_count;
@@ -1531,7 +1534,7 @@ megasas_build_and_issue_cmd(struct megasas_instance *instance,
 	/*
 	 * Logical drive command
 	 */
-	if (megasas_is_ldio(scmd))
+	if (megasas_cmd_type(scmd) == READ_WRITE_LDIO)
 		frame_count = megasas_build_ldio(instance, scmd, cmd);
 	else
 		frame_count = megasas_build_dcdb(instance, scmd, cmd);
@@ -1689,22 +1692,66 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
 	return 0;
 }
 
+/*
+* megasas_complete_outstanding_ioctls - Complete outstanding ioctls after a
+*                                       kill adapter
+* @instance:				Adapter soft state
+*
+*/
+void megasas_complete_outstanding_ioctls(struct megasas_instance *instance)
+{
+	int i;
+	struct megasas_cmd *cmd_mfi;
+	struct megasas_cmd_fusion *cmd_fusion;
+	struct fusion_context *fusion = instance->ctrl_context;
+
+	/* Find all outstanding ioctls */
+	if (fusion) {
+		for (i = 0; i < instance->max_fw_cmds; i++) {
+			cmd_fusion = fusion->cmd_list[i];
+			if (cmd_fusion->sync_cmd_idx != (u32)ULONG_MAX) {
+				cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
+				if (cmd_mfi->sync_cmd &&
+					cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT)
+					megasas_complete_cmd(instance,
+							     cmd_mfi, DID_OK);
+			}
+		}
+	} else {
+		for (i = 0; i < instance->max_fw_cmds; i++) {
+			cmd_mfi = instance->cmd_list[i];
+			if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd !=
+				MFI_CMD_ABORT)
+				megasas_complete_cmd(instance, cmd_mfi, DID_OK);
+		}
+	}
+}
+
+
 void megaraid_sas_kill_hba(struct megasas_instance *instance)
 {
+	/* Set critical error to block I/O & ioctls in case caller didn't */
+	instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+	/* Wait 1 second to ensure IO or ioctls in build have posted */
+	msleep(1000);
 	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
-		writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_PLASMA) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY)) {
+		writel(MFI_STOP_ADP,
+			&instance->reg_set->doorbell);
 		/* Flush */
 		readl(&instance->reg_set->doorbell);
 		if (instance->mpio && instance->requestorId)
 			memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);
 	} else {
-		writel(MFI_STOP_ADP, &instance->reg_set->inbound_doorbell);
+		writel(MFI_STOP_ADP,
+			&instance->reg_set->inbound_doorbell);
 	}
+	/* Complete outstanding ioctls when adapter is killed */
+	megasas_complete_outstanding_ioctls(instance);
 }
 
  /**
@@ -1717,6 +1764,7 @@ void
 megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
 {
 	unsigned long flags;
+
 	if (instance->flag & MEGASAS_FW_BUSY
 	    && time_after(jiffies, instance->last_time + 5 * HZ)
 	    && atomic_read(&instance->fw_outstanding) <
@@ -1724,13 +1772,8 @@ megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
 
 		spin_lock_irqsave(instance->host->host_lock, flags);
 		instance->flag &= ~MEGASAS_FW_BUSY;
-		if (instance->is_imr) {
-			instance->host->can_queue =
-				instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
-		} else
-			instance->host->can_queue =
-				instance->max_fw_cmds - MEGASAS_INT_CMDS;
 
+		instance->host->can_queue = instance->max_scsi_cmds;
 		spin_unlock_irqrestore(instance->host->host_lock, flags);
 	}
 }
@@ -3028,10 +3071,9 @@ megasas_issue_pending_cmds_again(struct megasas_instance *instance)
 					"was tried multiple times during reset."
 					"Shutting down the HBA\n",
 					cmd, cmd->scmd, cmd->sync_cmd);
+				instance->instancet->disable_intr(instance);
+				atomic_set(&instance->fw_reset_no_pci_access, 1);
 				megaraid_sas_kill_hba(instance);
-
-				instance->adprecovery =
-						MEGASAS_HW_CRITICAL_ERROR;
 				return;
 			}
 		}
@@ -3165,8 +3207,8 @@ process_fw_state_change_wq(struct work_struct *work)
 		if (megasas_transition_to_ready(instance, 1)) {
 			printk(KERN_NOTICE "megaraid_sas:adapter not ready\n");
 
+			atomic_set(&instance->fw_reset_no_pci_access, 1);
 			megaraid_sas_kill_hba(instance);
-			instance->adprecovery	= MEGASAS_HW_CRITICAL_ERROR;
 			return ;
 		}
 
@@ -3547,7 +3589,6 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
 	int i;
 	u32 max_cmd;
 	u32 sge_sz;
-	u32 sgl_sz;
 	u32 total_sz;
 	u32 frame_count;
 	struct megasas_cmd *cmd;
@@ -3566,24 +3607,23 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
 	}
 
 	/*
-	 * Calculated the number of 64byte frames required for SGL
-	 */
-	sgl_sz = sge_sz * instance->max_num_sge;
-	frame_count = (sgl_sz + MEGAMFI_FRAME_SIZE - 1) / MEGAMFI_FRAME_SIZE;
-	frame_count = 15;
-
-	/*
-	 * We need one extra frame for the MFI command
+	 * For MFI controllers.
+	 * max_num_sge = 60
+	 * max_sge_sz  = 16 byte (sizeof megasas_sge_skinny)
+	 * Total 960 byte (15 MFI frame of 64 byte)
+	 *
+	 * Fusion adapter require only 3 extra frame.
+	 * max_num_sge = 16 (defined as MAX_IOCTL_SGE)
+	 * max_sge_sz  = 12 byte (sizeof  megasas_sge64)
+	 * Total 192 byte (3 MFI frame of 64 byte)
 	 */
-	frame_count++;
-
+	frame_count = instance->ctrl_context ? (3 + 1) : (15 + 1);
 	total_sz = MEGAMFI_FRAME_SIZE * frame_count;
 	/*
 	 * Use DMA pool facility provided by PCI layer
 	 */
 	instance->frame_dma_pool = pci_pool_create("megasas frame pool",
-						   instance->pdev, total_sz, 64,
-						   0);
+					instance->pdev, total_sz, 256, 0);
 
 	if (!instance->frame_dma_pool) {
 		printk(KERN_DEBUG "megasas: failed to setup frame pool\n");
@@ -4631,28 +4671,48 @@ static int megasas_init_fw(struct megasas_instance *instance)
 				instance->crash_dump_h);
 		instance->crash_dump_buf = NULL;
 	}
+
+	instance->secure_jbod_support =
+		ctrl_info->adapterOperations3.supportSecurityonJBOD;
+	if (instance->secure_jbod_support)
+		dev_info(&instance->pdev->dev, "Firmware supports Secure JBOD\n");
 	instance->max_sectors_per_req = instance->max_num_sge *
 						PAGE_SIZE / 512;
 	if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
 		instance->max_sectors_per_req = tmp_sectors;
 
-	/* Check for valid throttlequeuedepth module parameter */
-	if (instance->is_imr) {
-		if (throttlequeuedepth > (instance->max_fw_cmds -
-					  MEGASAS_SKINNY_INT_CMDS))
-			instance->throttlequeuedepth =
-				MEGASAS_THROTTLE_QUEUE_DEPTH;
-		else
-			instance->throttlequeuedepth = throttlequeuedepth;
+	/*
+	 * 1. For fusion adapters, 3 commands for IOCTL and 5 commands
+	 *    for driver's internal DCMDs.
+	 * 2. For MFI skinny adapters, 5 commands for IOCTL + driver's
+	 *    internal DCMDs.
+	 * 3. For rest of MFI adapters, 27 commands reserved for IOCTLs
+	 *    and 5 commands for drivers's internal DCMD.
+	 */
+	if (instance->ctrl_context) {
+		instance->max_scsi_cmds = instance->max_fw_cmds -
+					(MEGASAS_FUSION_INTERNAL_CMDS +
+					MEGASAS_FUSION_IOCTL_CMDS);
+		sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS);
+	} else if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+		instance->max_scsi_cmds = instance->max_fw_cmds -
+						MEGASAS_SKINNY_INT_CMDS;
+		sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
 	} else {
-		if (throttlequeuedepth > (instance->max_fw_cmds -
-					  MEGASAS_INT_CMDS))
-			instance->throttlequeuedepth =
-				MEGASAS_THROTTLE_QUEUE_DEPTH;
-		else
-			instance->throttlequeuedepth = throttlequeuedepth;
+		instance->max_scsi_cmds = instance->max_fw_cmds -
+						MEGASAS_INT_CMDS;
+		sema_init(&instance->ioctl_sem, (MEGASAS_INT_CMDS - 5));
 	}
 
+	/* Check for valid throttlequeuedepth module parameter */
+	if (throttlequeuedepth &&
+			throttlequeuedepth <= instance->max_scsi_cmds)
+		instance->throttlequeuedepth = throttlequeuedepth;
+	else
+		instance->throttlequeuedepth =
+				MEGASAS_THROTTLE_QUEUE_DEPTH;
+
         /*
 	* Setup tasklet for cmd completion
 	*/
@@ -4947,12 +5007,7 @@ static int megasas_io_attach(struct megasas_instance *instance)
 	 */
 	host->irq = instance->pdev->irq;
 	host->unique_id = instance->unique_id;
-	if (instance->is_imr) {
-		host->can_queue =
-			instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
-	} else
-		host->can_queue =
-			instance->max_fw_cmds - MEGASAS_INT_CMDS;
+	host->can_queue = instance->max_scsi_cmds;
 	host->this_id = instance->init_id;
 	host->sg_tablesize = instance->max_num_sge;
 
@@ -5130,8 +5185,6 @@ static int megasas_probe_one(struct pci_dev *pdev,
 			((1 << PAGE_SHIFT) << instance->ctrl_context_pages));
 		INIT_LIST_HEAD(&fusion->cmd_pool);
 		spin_lock_init(&fusion->mpt_pool_lock);
-		memset(fusion->load_balance_info, 0,
-			sizeof(struct LD_LOAD_BALANCE_INFO) * MAX_LOGICAL_DRIVES_EXT);
 	}
 	break;
 	default: /* For all other supported controllers */
@@ -5215,12 +5268,10 @@ static int megasas_probe_one(struct pci_dev *pdev,
 	instance->init_id = MEGASAS_DEFAULT_INIT_ID;
 	instance->ctrl_info = NULL;
 
+
 	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY))
 		instance->flag_ieee = 1;
-		sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
-	} else
-		sema_init(&instance->ioctl_sem, (MEGASAS_INT_CMDS - 5));
 
 	megasas_dbg_lvl = 0;
 	instance->flag = 0;
@@ -6215,9 +6266,6 @@ static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
 		goto out_kfree_ioc;
 	}
 
-	/*
-	 * We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds
-	 */
 	if (down_interruptible(&instance->ioctl_sem)) {
 		error = -ERESTARTSYS;
 		goto out_kfree_ioc;

drivers/scsi/megaraid/megaraid_sas_fp.c

@@ -172,6 +172,7 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
 	struct MR_FW_RAID_MAP_ALL     *fw_map_old    = NULL;
 	struct MR_FW_RAID_MAP         *pFwRaidMap    = NULL;
 	int i;
+	u16 ld_count;
 
 
 	struct MR_DRV_RAID_MAP_ALL *drv_map =
@@ -191,9 +192,10 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
 		fw_map_old = (struct MR_FW_RAID_MAP_ALL *)
 			fusion->ld_map[(instance->map_id & 1)];
 		pFwRaidMap = &fw_map_old->raidMap;
+		ld_count = (u16)le32_to_cpu(pFwRaidMap->ldCount);
 
 #if VD_EXT_DEBUG
-		for (i = 0; i < le16_to_cpu(pFwRaidMap->ldCount); i++) {
+		for (i = 0; i < ld_count; i++) {
 			dev_dbg(&instance->pdev->dev, "(%d) :Index 0x%x "
 				"Target Id 0x%x Seq Num 0x%x Size 0/%llx\n",
 				instance->unique_id, i,
@@ -205,12 +207,15 @@ void MR_PopulateDrvRaidMap(struct megasas_instance *instance)
 
 		memset(drv_map, 0, fusion->drv_map_sz);
 		pDrvRaidMap->totalSize = pFwRaidMap->totalSize;
-		pDrvRaidMap->ldCount = (__le16)pFwRaidMap->ldCount;
+		pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count);
 		pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec;
 		for (i = 0; i < MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS; i++)
 			pDrvRaidMap->ldTgtIdToLd[i] =
 				(u8)pFwRaidMap->ldTgtIdToLd[i];
-		for (i = 0; i < le16_to_cpu(pDrvRaidMap->ldCount); i++) {
+		for (i = (MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS);
+			i < MAX_LOGICAL_DRIVES_EXT; i++)
+			pDrvRaidMap->ldTgtIdToLd[i] = 0xff;
+		for (i = 0; i < ld_count; i++) {
 			pDrvRaidMap->ldSpanMap[i] = pFwRaidMap->ldSpanMap[i];
 #if VD_EXT_DEBUG
 			dev_dbg(&instance->pdev->dev,
@@ -252,7 +257,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance)
 	struct LD_LOAD_BALANCE_INFO *lbInfo;
 	PLD_SPAN_INFO ldSpanInfo;
 	struct MR_LD_RAID         *raid;
-	int ldCount, num_lds;
+	u16 ldCount, num_lds;
 	u16 ld;
 	u32 expected_size;
 
@@ -356,7 +361,7 @@ static int getSpanInfo(struct MR_DRV_RAID_MAP_ALL *map,
 
 	for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) {
 		ld = MR_TargetIdToLdGet(ldCount, map);
-			if (ld >= MAX_LOGICAL_DRIVES_EXT)
+			if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
 				continue;
 		raid = MR_LdRaidGet(ld, map);
 		dev_dbg(&instance->pdev->dev, "LD %x: span_depth=%x\n",
@@ -1157,7 +1162,7 @@ void mr_update_span_set(struct MR_DRV_RAID_MAP_ALL *map,
 
 	for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) {
 		ld = MR_TargetIdToLdGet(ldCount, map);
-		if (ld >= MAX_LOGICAL_DRIVES_EXT)
+		if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
 			continue;
 		raid = MR_LdRaidGet(ld, map);
 		for (element = 0; element < MAX_QUAD_DEPTH; element++) {

drivers/scsi/megaraid/megaraid_sas_fusion.c

@@ -63,7 +63,6 @@ extern struct megasas_cmd *megasas_get_cmd(struct megasas_instance
 extern void
 megasas_complete_cmd(struct megasas_instance *instance,
 		     struct megasas_cmd *cmd, u8 alt_status);
-int megasas_is_ldio(struct scsi_cmnd *cmd);
 int
 wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,
 	      int seconds);
@@ -103,6 +102,8 @@ megasas_enable_intr_fusion(struct megasas_instance *instance)
 {
 	struct megasas_register_set __iomem *regs;
 	regs = instance->reg_set;
+
+	instance->mask_interrupts = 0;
 	/* For Thunderbolt/Invader also clear intr on enable */
 	writel(~0, &regs->outbound_intr_status);
 	readl(&regs->outbound_intr_status);
@@ -111,7 +112,6 @@ megasas_enable_intr_fusion(struct megasas_instance *instance)
 
 	/* Dummy readl to force pci flush */
 	readl(&regs->outbound_intr_mask);
-	instance->mask_interrupts = 0;
 }
 
 /**
@@ -196,6 +196,7 @@ inline void megasas_return_cmd_fusion(struct megasas_instance *instance,
 
 	cmd->scmd = NULL;
 	cmd->sync_cmd_idx = (u32)ULONG_MAX;
+	memset(cmd->io_request, 0, sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
 	list_add(&cmd->list, (&fusion->cmd_pool)->next);
 
 	spin_unlock_irqrestore(&fusion->mpt_pool_lock, flags);
@@ -689,6 +690,8 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 		= 1;
 	init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb
 		= 1;
+	init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw
+		= 1;
 	/* Convert capability to LE32 */
 	cpu_to_le32s((u32 *)&init_frame->driver_operations.mfi_capabilities);
 
@@ -698,12 +701,11 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 		cpu_to_le32(lower_32_bits(ioc_init_handle));
 	init_frame->data_xfer_len = cpu_to_le32(sizeof(struct MPI2_IOC_INIT_REQUEST));
 
-	req_desc.Words = 0;
+	req_desc.u.low = cpu_to_le32(lower_32_bits(cmd->frame_phys_addr));
+	req_desc.u.high = cpu_to_le32(upper_32_bits(cmd->frame_phys_addr));
 	req_desc.MFAIo.RequestFlags =
 		(MEGASAS_REQ_DESCRIPT_FLAGS_MFA <<
-		 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
-	cpu_to_le32s((u32 *)&req_desc.MFAIo);
-	req_desc.Words |= cpu_to_le64(cmd->frame_phys_addr);
+		MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
 
 	/*
 	 * disable the intr before firing the init frame
@@ -1017,8 +1019,12 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
 	 * does not exceed max cmds that the FW can support
 	 */
 	instance->max_fw_cmds = instance->max_fw_cmds-1;
-	/* Only internal cmds (DCMD) need to have MFI frames */
-	instance->max_mfi_cmds = MEGASAS_INT_CMDS;
+
+	/*
+	 * Only Driver's internal DCMDs and IOCTL DCMDs needs to have MFI frames
+	 */
+	instance->max_mfi_cmds =
+		MEGASAS_FUSION_INTERNAL_CMDS + MEGASAS_FUSION_IOCTL_CMDS;
 
 	max_cmd = instance->max_fw_cmds;
 
@@ -1285,6 +1291,7 @@ megasas_make_sgl_fusion(struct megasas_instance *instance,
 
 			sgl_ptr =
 			  (struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
+			memset(sgl_ptr, 0, MEGASAS_MAX_SZ_CHAIN_FRAME);
 		}
 	}
 
@@ -1658,6 +1665,8 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
 	u32 device_id;
 	struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
 	u16 pd_index = 0;
+	u16 os_timeout_value;
+	u16 timeout_limit;
 	struct MR_DRV_RAID_MAP_ALL *local_map_ptr;
 	struct fusion_context *fusion = instance->ctrl_context;
 	u8                          span, physArm;
@@ -1674,52 +1683,66 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
 
 	io_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
 
-
-	/* Check if this is a system PD I/O */
 	if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS &&
 	    instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
-		io_request->Function = 0;
 		if (fusion->fast_path_io)
 			io_request->DevHandle =
 			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
-		io_request->RaidContext.timeoutValue =
-			local_map_ptr->raidMap.fpPdIoTimeoutSec;
-		io_request->RaidContext.regLockFlags = 0;
-		io_request->RaidContext.regLockRowLBA = 0;
-		io_request->RaidContext.regLockLength = 0;
 		io_request->RaidContext.RAIDFlags =
-			MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD <<
-			MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
-		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-			(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
-			io_request->IoFlags |= cpu_to_le16(
-				MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
-		cmd->request_desc->SCSIIO.RequestFlags =
-			(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
-			 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
-		cmd->request_desc->SCSIIO.DevHandle =
-			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+			MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD
+			<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
+		cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle;
 		cmd->request_desc->SCSIIO.MSIxIndex =
 			instance->msix_vectors ? smp_processor_id() % instance->msix_vectors : 0;
-		/*
-		 * If the command is for the tape device, set the
-		 * FP timeout to the os layer timeout value.
-		 */
-		if (scmd->device->type == TYPE_TAPE) {
-			if ((scmd->request->timeout / HZ) > 0xFFFF)
-				io_request->RaidContext.timeoutValue =
-					0xFFFF;
-			else
-				io_request->RaidContext.timeoutValue =
-					scmd->request->timeout / HZ;
+		os_timeout_value = scmd->request->timeout / HZ;
+
+		if (instance->secure_jbod_support &&
+			(megasas_cmd_type(scmd) == NON_READ_WRITE_SYSPDIO)) {
+			/* system pd firmware path */
+			io_request->Function  =
+				MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+			cmd->request_desc->SCSIIO.RequestFlags =
+				(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
+				MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+			io_request->RaidContext.timeoutValue =
+				cpu_to_le16(os_timeout_value);
+		} else {
+			/* system pd Fast Path */
+			io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+			io_request->RaidContext.regLockFlags = 0;
+			io_request->RaidContext.regLockRowLBA = 0;
+			io_request->RaidContext.regLockLength = 0;
+			timeout_limit = (scmd->device->type == TYPE_DISK) ?
+					255 : 0xFFFF;
+			io_request->RaidContext.timeoutValue =
+				cpu_to_le16((os_timeout_value > timeout_limit) ?
+				timeout_limit : os_timeout_value);
+		if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
+			(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+			io_request->IoFlags |=
+			cpu_to_le16(MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH);
+
+			cmd->request_desc->SCSIIO.RequestFlags =
+				(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
+				MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
 		}
 	} else {
 		if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS)
 			goto NonFastPath;
 
+		/*
+		 * For older firmware, Driver should not access ldTgtIdToLd
+		 * beyond index 127 and for Extended VD firmware, ldTgtIdToLd
+		 * should not go beyond 255.
+		 */
+
+		if ((!fusion->fast_path_io) ||
+			(device_id >= instance->fw_supported_vd_count))
+			goto NonFastPath;
+
 		ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
-		if ((ld >= instance->fw_supported_vd_count) ||
-			(!fusion->fast_path_io))
+
+		if (ld >= instance->fw_supported_vd_count)
 			goto NonFastPath;
 
 		raid = MR_LdRaidGet(ld, local_map_ptr);
@@ -1811,7 +1834,7 @@ megasas_build_io_fusion(struct megasas_instance *instance,
 	 */
 	io_request->IoFlags = cpu_to_le16(scp->cmd_len);
 
-	if (megasas_is_ldio(scp))
+	if (megasas_cmd_type(scp) == READ_WRITE_LDIO)
 		megasas_build_ldio_fusion(instance, scp, cmd);
 	else
 		megasas_build_dcdb_fusion(instance, scp, cmd);
@@ -2612,7 +2635,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
 				instance->host->host_no);
 			megaraid_sas_kill_hba(instance);
 			instance->skip_heartbeat_timer_del = 1;
-			instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
 			retval = FAILED;
 			goto out;
 		}
@@ -2808,8 +2830,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
 				dev_info(&instance->pdev->dev,
 					"Failed from %s %d\n",
 					__func__, __LINE__);
-				instance->adprecovery =
-					MEGASAS_HW_CRITICAL_ERROR;
 				megaraid_sas_kill_hba(instance);
 				retval = FAILED;
 			}
@@ -2858,7 +2878,6 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int iotimeout)
 		       "adapter scsi%d.\n", instance->host->host_no);
 		megaraid_sas_kill_hba(instance);
 		instance->skip_heartbeat_timer_del = 1;
-		instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
 		retval = FAILED;
 	} else {
 		/* For VF: Restart HB timer if we didn't OCR */

drivers/scsi/megaraid/megaraid_sas_fusion.h

@@ -306,14 +306,9 @@ struct MPI2_RAID_SCSI_IO_REQUEST {
  * MPT RAID MFA IO Descriptor.
  */
 struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR {
-#if   defined(__BIG_ENDIAN_BITFIELD)
-	u32     MessageAddress1:24; /* bits 31:8*/
-	u32     RequestFlags:8;
-#else
 	u32     RequestFlags:8;
-	u32     MessageAddress1:24; /* bits 31:8*/
-#endif
-	u32     MessageAddress2;      /* bits 61:32 */
+	u32     MessageAddress1:24;
+	u32     MessageAddress2;
 };
 
 /* Default Request Descriptor */

drivers/scsi/mpt2sas/mpi/mpi2.h

@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.32
+ *  mpi2.h Version:  02.00.35
  *
  *  Version History
  *  ---------------
@@ -83,6 +83,9 @@
  *  04-09-13  02.00.30  Bumped MPI2_HEADER_VERSION_UNIT.
  *  04-17-13  02.00.31  Bumped MPI2_HEADER_VERSION_UNIT.
  *  08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  01-08-14  02.00.34  Bumped MPI2_HEADER_VERSION_UNIT.
+ *  06-13-14  02.00.35  Bumped MPI2_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -108,7 +111,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x20)
+#define MPI2_HEADER_VERSION_UNIT            (0x23)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)

drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h

@@ -6,7 +6,7 @@
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.26
+ *    mpi2_cnfg.h Version:  02.00.29
  *
  *  Version History
  *  ---------------
@@ -157,6 +157,20 @@
  *  04-09-13  02.00.25  Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
  *			Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
  *			match the specification.
+ *  12-05-13  02.00.27  Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
+ *			MPI2_CONFIG_PAGE_MAN_7.
+ *			Added EnclosureLevel and ConnectorName fields to
+ *			MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *			Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
+ *			MPI2_CONFIG_PAGE_SAS_DEV_0.
+ *			Added EnclosureLevel field to
+ *			MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *			Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
+ *			MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ *  01-08-14  02.00.28  Added more defines for the BiosOptions field of
+ *			MPI2_CONFIG_PAGE_BIOS_1.
+ *  06-13-14  02.00.29  Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
+ *			more defines for the BiosOptions field.
  *  --------------------------------------------------------------------------
  */
 
@@ -706,6 +720,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7
 #define MPI2_MANUFACTURING7_PAGEVERSION                 (0x01)
 
 /* defines for the Flags field */
+#define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL         (0x00000008)
 #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER       (0x00000002)
 #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO                (0x00000001)
 
@@ -1224,7 +1239,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1
 	MPI2_CONFIG_PAGE_HEADER Header;                     /* 0x00 */
 	U32                     BiosOptions;                /* 0x04 */
 	U32                     IOCSettings;                /* 0x08 */
-	U32                     Reserved1;                  /* 0x0C */
+	U8			SSUTimeout;		    /* 0x0C */
+	U8			Reserved1;		    /* 0x0D */
+	U16			Reserved2;		    /* 0x0E */
 	U32                     DeviceSettings;             /* 0x10 */
 	U16                     NumberOfDevices;            /* 0x14 */
 	U16                     UEFIVersion;                /* 0x16 */
@@ -1235,9 +1252,24 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1
 } MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1,
   Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t;
 
-#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x05)
+#define MPI2_BIOSPAGE1_PAGEVERSION                      (0x07)
 
 /* values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK			(0x00003800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL			(0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE			(0x00000800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID			(0x00001000)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS			(0x00001800)
+#define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY			(0x00002000)
+
+#define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS                 (0x00000400)
+
+#define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD       (0x00000300)
+#define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD   (0x00000000)
+#define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD       (0x00000100)
+#define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD    (0x00000200)
+#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD    (0x00000300)
+
 #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID                  (0x000000F0)
 #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID                   (0x00000000)
 
@@ -2420,13 +2452,13 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
     U8                                  PortGroups;             /* 0x2C */
     U8                                  DmaGroup;               /* 0x2D */
     U8                                  ControlGroup;           /* 0x2E */
-    U8                                  Reserved1;              /* 0x2F */
-    U32                                 Reserved2;              /* 0x30 */
+	U8				 EnclosureLevel;	 /* 0x2F */
+	U8				 ConnectorName[4];	 /* 0x30 */
     U32                                 Reserved3;              /* 0x34 */
 } MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
   Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t;
 
-#define MPI2_SASDEVICE0_PAGEVERSION         (0x08)
+#define MPI2_SASDEVICE0_PAGEVERSION         (0x09)
 
 /* values for SAS Device Page 0 AccessStatus field */
 #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS                  (0x00)
@@ -2464,6 +2496,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED           (0x0020)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED           (0x0010)
 #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH         (0x0008)
+#define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID             (0x0002)
 #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT               (0x0001)
 
 
@@ -2732,7 +2765,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
     U16                                 EnclosureHandle;            /* 0x16 */
     U16                                 NumSlots;                   /* 0x18 */
     U16                                 StartSlot;                  /* 0x1A */
-    U16                                 Reserved2;                  /* 0x1C */
+	U8				 Reserved2;		     /* 0x1C */
+	U8				 EnclosureLevel;	     /* 0x1D */
     U16                                 SEPDevHandle;               /* 0x1E */
     U32                                 Reserved3;                  /* 0x20 */
     U32                                 Reserved4;                  /* 0x24 */
@@ -2740,9 +2774,10 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0
   MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
   Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t;
 
-#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x03)
+#define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
 
 /* values for SAS Enclosure Page 0 Flags field */
+#define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES           (0x0001)

drivers/scsi/mpt2sas/mpi/mpi2_ioc.h

@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  October 11, 2006
  *
- *  mpi2_ioc.h Version:  02.00.23
+ *  mpi2_ioc.h Version:  02.00.24
  *
  *  Version History
  *  ---------------
@@ -126,6 +126,7 @@
  *                      Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
  *                      Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
  *                      Added Encrypted Hash Extended Image.
+ *  12-05-13  02.00.24  Added MPI25_HASH_IMAGE_TYPE_BIOS.
  *  --------------------------------------------------------------------------
  */
 
@@ -1589,6 +1590,7 @@ Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t;
 /* values for HashImageType */
 #define MPI25_HASH_IMAGE_TYPE_UNUSED            (0x00)
 #define MPI25_HASH_IMAGE_TYPE_FIRMWARE          (0x01)
+#define MPI25_HASH_IMAGE_TYPE_BIOS              (0x02)
 
 /* values for HashAlgorithm */
 #define MPI25_HASH_ALGORITHM_UNUSED             (0x00)

drivers/scsi/mpt2sas/mpi/mpi2_tool.h

@@ -6,7 +6,7 @@
  *          Title:  MPI diagnostic tool structures and definitions
  *  Creation Date:  March 26, 2007
  *
- *    mpi2_tool.h Version:  02.00.11
+ *    mpi2_tool.h Version:  02.00.12
  *
  *  Version History
  *  ---------------
@@ -29,7 +29,8 @@
  *                      MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
  *  07-26-12  02.00.10  Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
  *			it uses MPI Chain SGE as well as MPI Simple SGE.
- * 08-19-13  02.00.11  Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ *  08-19-13  02.00.11  Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
+ *  01-08-14  02.00.12  Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC.
  *  --------------------------------------------------------------------------
  */
 
@@ -101,6 +102,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
 #define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES      (0x20000000)
 #define MPI2_TOOLBOX_CLEAN_FW_CURRENT               (0x10000000)
 #define MPI2_TOOLBOX_CLEAN_FW_BACKUP                (0x08000000)
+#define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC   (0x04000000)
 #define MPI2_TOOLBOX_CLEAN_MEGARAID                 (0x02000000)
 #define MPI2_TOOLBOX_CLEAN_INITIALIZATION           (0x01000000)
 #define MPI2_TOOLBOX_CLEAN_FLASH                    (0x00000004)

drivers/scsi/mpt2sas/mpt2sas_base.c

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -639,6 +640,9 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
 		if (!ioc->hide_ir_msg)
 			desc = "Log Entry Added";
 		break;
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		desc = "Temperature Threshold";
+		break;
 	}
 
 	if (!desc)
@@ -1296,6 +1300,8 @@ _base_free_irq(struct MPT2SAS_ADAPTER *ioc)
 
 	list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
 		list_del(&reply_q->list);
+		irq_set_affinity_hint(reply_q->vector, NULL);
+		free_cpumask_var(reply_q->affinity_hint);
 		synchronize_irq(reply_q->vector);
 		free_irq(reply_q->vector, reply_q);
 		kfree(reply_q);
@@ -1325,6 +1331,11 @@ _base_request_irq(struct MPT2SAS_ADAPTER *ioc, u8 index, u32 vector)
 	reply_q->ioc = ioc;
 	reply_q->msix_index = index;
 	reply_q->vector = vector;
+
+	if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+		return -ENOMEM;
+	cpumask_clear(reply_q->affinity_hint);
+
 	atomic_set(&reply_q->busy, 0);
 	if (ioc->msix_enable)
 		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
@@ -1359,6 +1370,7 @@ static void
 _base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
 {
 	unsigned int cpu, nr_cpus, nr_msix, index = 0;
+	struct adapter_reply_queue *reply_q;
 
 	if (!_base_is_controller_msix_enabled(ioc))
 		return;
@@ -1373,20 +1385,30 @@ _base_assign_reply_queues(struct MPT2SAS_ADAPTER *ioc)
 
 	cpu = cpumask_first(cpu_online_mask);
 
-	do {
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
 		unsigned int i, group = nr_cpus / nr_msix;
 
+		if (cpu >= nr_cpus)
+			break;
+
 		if (index < nr_cpus % nr_msix)
 			group++;
 
 		for (i = 0 ; i < group ; i++) {
 			ioc->cpu_msix_table[cpu] = index;
+			cpumask_or(reply_q->affinity_hint,
+				   reply_q->affinity_hint, get_cpu_mask(cpu));
 			cpu = cpumask_next(cpu, cpu_online_mask);
 		}
 
+		if (irq_set_affinity_hint(reply_q->vector,
+					   reply_q->affinity_hint))
+			dinitprintk(ioc, pr_info(MPT2SAS_FMT
+			    "error setting affinity hint for irq vector %d\n",
+			    ioc->name, reply_q->vector));
 		index++;
-
-	} while (cpu < nr_cpus);
+	}
 }
 
 /**
@@ -2338,6 +2360,7 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
 	mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
 	mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
 	mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
 	_base_display_ioc_capabilities(ioc);
 
 	/*
@@ -2355,6 +2378,8 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
 	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
 	mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
 
+	if (ioc->iounit_pg8.NumSensors)
+		ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
 }
 
 /**
@@ -2486,9 +2511,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 
 	/* command line tunables  for max sgl entries */
 	if (max_sgl_entries != -1) {
-		ioc->shost->sg_tablesize = (max_sgl_entries <
-		    MPT2SAS_SG_DEPTH) ? max_sgl_entries :
-		    MPT2SAS_SG_DEPTH;
+		ioc->shost->sg_tablesize =  min_t(unsigned short,
+			     max_sgl_entries, SCSI_MAX_SG_CHAIN_SEGMENTS);
+		if (ioc->shost->sg_tablesize > MPT2SAS_SG_DEPTH)
+			printk(MPT2SAS_WARN_FMT
+			 "sg_tablesize(%u) is bigger than kernel defined"
+			 " SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
+			  ioc->shost->sg_tablesize, MPT2SAS_SG_DEPTH);
 	} else {
 		ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
 	}
@@ -3236,7 +3265,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
 	u16 smid;
 	u32 ioc_state;
 	unsigned long timeleft;
-	u8 issue_reset;
+	bool issue_reset = false;
 	int rc;
 	void *request;
 	u16 wait_state_count;
@@ -3300,7 +3329,7 @@ mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2SasIoUnitControlRequest_t)/4);
 		if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
+			issue_reset = true;
 		goto issue_host_reset;
 	}
 	if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
@@ -3341,7 +3370,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
 	u16 smid;
 	u32 ioc_state;
 	unsigned long timeleft;
-	u8 issue_reset;
+	bool issue_reset = false;
 	int rc;
 	void *request;
 	u16 wait_state_count;
@@ -3398,7 +3427,7 @@ mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2SepRequest_t)/4);
 		if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
+			issue_reset = true;
 		goto issue_host_reset;
 	}
 	if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
@@ -4594,6 +4623,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
 	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
 	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+	_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
 	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
 	if (r)
 		goto out_free_resources;

drivers/scsi/mpt2sas/mpt2sas_base.h

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.h
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -67,10 +68,10 @@
 
 /* driver versioning info */
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
-#define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
+#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"18.100.00.00"
-#define MPT2SAS_MAJOR_VERSION		18
+#define MPT2SAS_DRIVER_VERSION		"20.100.00.00"
+#define MPT2SAS_MAJOR_VERSION		20
 #define MPT2SAS_MINOR_VERSION		100
 #define MPT2SAS_BUILD_VERSION		00
 #define MPT2SAS_RELEASE_VERSION		00
@@ -586,6 +587,7 @@ struct adapter_reply_queue {
 	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
 	char			name[MPT_NAME_LENGTH];
 	atomic_t		busy;
+	cpumask_var_t		affinity_hint;
 	struct list_head	list;
 };
 
@@ -725,6 +727,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
  * @ioc_pg8: static ioc page 8
  * @iounit_pg0: static iounit page 0
  * @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
  * @sas_hba: sas host object
  * @sas_expander_list: expander object list
  * @sas_node_lock:
@@ -795,6 +798,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
  * @reply_post_host_index: head index in the pool where FW completes IO
  * @delayed_tr_list: target reset link list
  * @delayed_tr_volume_list: volume target reset link list
+ * @@temp_sensors_count: flag to carry the number of temperature sensors
  */
 struct MPT2SAS_ADAPTER {
 	struct list_head list;
@@ -892,6 +896,7 @@ struct MPT2SAS_ADAPTER {
 	Mpi2IOCPage8_t ioc_pg8;
 	Mpi2IOUnitPage0_t iounit_pg0;
 	Mpi2IOUnitPage1_t iounit_pg1;
+	Mpi2IOUnitPage8_t iounit_pg8;
 
 	struct _boot_device req_boot_device;
 	struct _boot_device req_alt_boot_device;
@@ -992,6 +997,7 @@ struct MPT2SAS_ADAPTER {
 
 	struct list_head delayed_tr_list;
 	struct list_head delayed_tr_volume_list;
+	u8		temp_sensors_count;
 
 	/* diag buffer support */
 	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -1120,6 +1126,8 @@ int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
     *mpi_reply, Mpi2IOUnitPage1_t *config_page);
 int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
     *mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
 int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
 	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
 int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t

drivers/scsi/mpt2sas/mpt2sas_config.c

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -718,6 +719,42 @@ mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
 	return r;
 }
 
+/**
+ * mpt2sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 8;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+	mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
 /**
  * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8
  * @ioc: per adapter object

drivers/scsi/mpt2sas/mpt2sas_ctl.c

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt2sas/mpt2sas_ctl.h

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt2sas/mpt2sas_debug.h

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt2sas/mpt2sas_scsih.c

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -2729,9 +2730,18 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
 	    ioc->name, scmd);
 	scsi_print_command(scmd);
 
+	if (ioc->is_driver_loading) {
+		printk(MPT2SAS_INFO_FMT "Blocking the host reset\n",
+							  ioc->name);
+		r = FAILED;
+		goto out;
+	}
+
 	retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 	    FORCE_BIG_HAMMER);
 	r = (retval < 0) ? FAILED : SUCCESS;
+
+ out:
 	printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
 	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
 
@@ -3646,6 +3656,31 @@ _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
 		    le16_to_cpu(event_data->VolDevHandle));
 }
 
+/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT2SAS_ADAPTER *ioc,
+	Mpi2EventDataTemperature_t *event_data)
+{
+	if (ioc->temp_sensors_count >= event_data->SensorNum) {
+		printk(MPT2SAS_ERR_FMT "Temperature Threshold flags %s%s%s%s"
+		  " exceeded for Sensor: %d !!!\n", ioc->name,
+		  ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
+		  event_data->SensorNum);
+		printk(MPT2SAS_ERR_FMT "Current Temp In Celsius: %d\n",
+			ioc->name, event_data->CurrentTemperature);
+	}
+}
+
 /**
  * _scsih_flush_running_cmds - completing outstanding commands.
  * @ioc: per adapter object
@@ -4509,6 +4544,10 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 			scmd->result = DID_TRANSPORT_DISRUPTED << 16;
 			goto out;
 		}
+		if (log_info == 0x32010081) {
+			scmd->result = DID_RESET << 16;
+			break;
+		}
 		scmd->result = DID_SOFT_ERROR << 16;
 		break;
 	case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
@@ -7557,6 +7596,12 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
 	case MPI2_EVENT_IR_PHYSICAL_DISK:
 		break;
 
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		_scsih_temp_threshold_events(ioc,
+			(Mpi2EventDataTemperature_t *)
+			mpi_reply->EventData);
+		break;
+
 	default: /* ignore the rest */
 		return;
 	}

drivers/scsi/mpt2sas/mpt2sas_transport.c

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
  * Copyright (C) 2007-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 20013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt3sas/mpt3sas_base.c

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -619,6 +620,9 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
 	case MPI2_EVENT_LOG_ENTRY_ADDED:
 		desc = "Log Entry Added";
 		break;
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		desc = "Temperature Threshold";
+		break;
 	}
 
 	if (!desc)
@@ -1580,6 +1584,8 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc)
 
 	list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
 		list_del(&reply_q->list);
+		irq_set_affinity_hint(reply_q->vector, NULL);
+		free_cpumask_var(reply_q->affinity_hint);
 		synchronize_irq(reply_q->vector);
 		free_irq(reply_q->vector, reply_q);
 		kfree(reply_q);
@@ -1609,6 +1615,11 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
 	reply_q->ioc = ioc;
 	reply_q->msix_index = index;
 	reply_q->vector = vector;
+
+	if (!alloc_cpumask_var(&reply_q->affinity_hint, GFP_KERNEL))
+		return -ENOMEM;
+	cpumask_clear(reply_q->affinity_hint);
+
 	atomic_set(&reply_q->busy, 0);
 	if (ioc->msix_enable)
 		snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
@@ -1643,6 +1654,7 @@ static void
 _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
 {
 	unsigned int cpu, nr_cpus, nr_msix, index = 0;
+	struct adapter_reply_queue *reply_q;
 
 	if (!_base_is_controller_msix_enabled(ioc))
 		return;
@@ -1657,20 +1669,30 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
 
 	cpu = cpumask_first(cpu_online_mask);
 
-	do {
+	list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
+
 		unsigned int i, group = nr_cpus / nr_msix;
 
+		if (cpu >= nr_cpus)
+			break;
+
 		if (index < nr_cpus % nr_msix)
 			group++;
 
 		for (i = 0 ; i < group ; i++) {
 			ioc->cpu_msix_table[cpu] = index;
+			cpumask_or(reply_q->affinity_hint,
+				   reply_q->affinity_hint, get_cpu_mask(cpu));
 			cpu = cpumask_next(cpu, cpu_online_mask);
 		}
 
+		if (irq_set_affinity_hint(reply_q->vector,
+					   reply_q->affinity_hint))
+			dinitprintk(ioc, pr_info(MPT3SAS_FMT
+			    "error setting affinity hint for irq vector %d\n",
+			    ioc->name, reply_q->vector));
 		index++;
-
-	} while (cpu < nr_cpus);
+	}
 }
 
 /**
@@ -2500,6 +2522,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 	mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
 	mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
 	mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+	mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
 	_base_display_ioc_capabilities(ioc);
 
 	/*
@@ -2516,6 +2539,9 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 		    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
 	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
 	mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+
+	if (ioc->iounit_pg8.NumSensors)
+		ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
 }
 
 /**
@@ -2659,8 +2685,14 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc,  int sleep_flag)
 
 	if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
 		sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
-	else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS)
-		sg_tablesize = MPT3SAS_MAX_PHYS_SEGMENTS;
+	else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
+		sg_tablesize = min_t(unsigned short, sg_tablesize,
+				      SCSI_MAX_SG_CHAIN_SEGMENTS);
+		pr_warn(MPT3SAS_FMT
+		 "sg_tablesize(%u) is bigger than kernel"
+		 " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
+		 sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
+	}
 	ioc->shost->sg_tablesize = sg_tablesize;
 
 	ioc->hi_priority_depth = facts->HighPriorityCredit;
@@ -3419,7 +3451,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 	u16 smid;
 	u32 ioc_state;
 	unsigned long timeleft;
-	u8 issue_reset;
+	bool issue_reset = false;
 	int rc;
 	void *request;
 	u16 wait_state_count;
@@ -3483,7 +3515,7 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2SasIoUnitControlRequest_t)/4);
 		if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
-			issue_reset = 1;
+			issue_reset = true;
 		goto issue_host_reset;
 	}
 	if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
@@ -3523,7 +3555,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 	u16 smid;
 	u32 ioc_state;
 	unsigned long timeleft;
-	u8 issue_reset;
+	bool issue_reset = false;
 	int rc;
 	void *request;
 	u16 wait_state_count;
@@ -3581,7 +3613,7 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2SepRequest_t)/4);
 		if (!(ioc->base_cmds.status & MPT3_CMD_RESET))
-			issue_reset = 1;
+			issue_reset = false;
 		goto issue_host_reset;
 	}
 	if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID)
@@ -4720,6 +4752,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
 	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
 	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+	_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
 
 	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
 	if (r)

drivers/scsi/mpt3sas/mpt3sas_base.h

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -68,7 +69,7 @@
 
 /* driver versioning info */
 #define MPT3SAS_DRIVER_NAME		"mpt3sas"
-#define MPT3SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
+#define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
 #define MPT3SAS_DRIVER_VERSION		"04.100.00.00"
 #define MPT3SAS_MAJOR_VERSION		4
@@ -506,6 +507,7 @@ struct adapter_reply_queue {
 	Mpi2ReplyDescriptorsUnion_t *reply_post_free;
 	char			name[MPT_NAME_LENGTH];
 	atomic_t		busy;
+	cpumask_var_t		affinity_hint;
 	struct list_head	list;
 };
 
@@ -659,6 +661,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @ioc_pg8: static ioc page 8
  * @iounit_pg0: static iounit page 0
  * @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
  * @sas_hba: sas host object
  * @sas_expander_list: expander object list
  * @sas_node_lock:
@@ -728,6 +731,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
  * @reply_post_host_index: head index in the pool where FW completes IO
  * @delayed_tr_list: target reset link list
  * @delayed_tr_volume_list: volume target reset link list
+ * @@temp_sensors_count: flag to carry the number of temperature sensors
  */
 struct MPT3SAS_ADAPTER {
 	struct list_head list;
@@ -834,6 +838,7 @@ struct MPT3SAS_ADAPTER {
 	Mpi2IOCPage8_t ioc_pg8;
 	Mpi2IOUnitPage0_t iounit_pg0;
 	Mpi2IOUnitPage1_t iounit_pg1;
+	Mpi2IOUnitPage8_t iounit_pg8;
 
 	struct _boot_device req_boot_device;
 	struct _boot_device req_alt_boot_device;
@@ -934,6 +939,7 @@ struct MPT3SAS_ADAPTER {
 
 	struct list_head delayed_tr_list;
 	struct list_head delayed_tr_volume_list;
+	u8		temp_sensors_count;
 
 	/* diag buffer support */
 	u8		*diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -1082,6 +1088,8 @@ int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
 int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+	*mpi_reply, Mpi2IOUnitPage8_t *config_page);
 int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
 	u16 sz);

drivers/scsi/mpt3sas/mpt3sas_config.c

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -870,6 +871,42 @@ mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
 	return r;
 }
 
+/**
+ * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+	mpi_request.Header.PageNumber = 8;
+	mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
 /**
  * mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
  * @ioc: per adapter object

drivers/scsi/mpt3sas/mpt3sas_ctl.c

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt3sas/mpt3sas_ctl.h

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt3sas/mpt3sas_debug.h

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_debug.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt3sas/mpt3sas_scsih.c

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -2392,9 +2393,17 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
 	    ioc->name, scmd);
 	scsi_print_command(scmd);
 
+	if (ioc->is_driver_loading) {
+		pr_info(MPT3SAS_FMT "Blocking the host reset\n",
+		    ioc->name);
+		r = FAILED;
+		goto out;
+	}
+
 	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 	    FORCE_BIG_HAMMER);
 	r = (retval < 0) ? FAILED : SUCCESS;
+out:
 	pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
 	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
 
@@ -3341,6 +3350,31 @@ _scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
 		    le16_to_cpu(event_data->VolDevHandle));
 }
 
+/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2EventDataTemperature_t *event_data)
+{
+	if (ioc->temp_sensors_count >= event_data->SensorNum) {
+		pr_err(MPT3SAS_FMT "Temperature Threshold flags %s%s%s%s"
+		  " exceeded for Sensor: %d !!!\n", ioc->name,
+		  ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
+		  ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
+		  event_data->SensorNum);
+		pr_err(MPT3SAS_FMT "Current Temp In Celsius: %d\n",
+			ioc->name, event_data->CurrentTemperature);
+	}
+}
+
 /**
  * _scsih_flush_running_cmds - completing outstanding commands.
  * @ioc: per adapter object
@@ -7194,6 +7228,12 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 	case MPI2_EVENT_IR_PHYSICAL_DISK:
 		break;
 
+	case MPI2_EVENT_TEMP_THRESHOLD:
+		_scsih_temp_threshold_events(ioc,
+			(Mpi2EventDataTemperature_t *)
+			mpi_reply->EventData);
+		break;
+
 	default: /* ignore the rest */
 		return 1;
 	}

drivers/scsi/mpt3sas/mpt3sas_transport.c

@@ -3,7 +3,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_transport.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c

@@ -4,7 +4,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h

@@ -5,7 +5,8 @@
  *
  * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.h
  * Copyright (C) 2012-2014  LSI Corporation
- *  (mailto:DL-MPTFusionLinux@lsi.com)
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

drivers/scsi/nsp32.c

@@ -1441,8 +1441,6 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
 
 static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
@@ -1458,64 +1456,63 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
 	data = (nsp32_hw_data *)host->hostdata;
 	base = host->io_port;
 
-	SPRINTF("NinjaSCSI-32 status\n\n");
-	SPRINTF("Driver version:        %s, $Revision: 1.33 $\n", nsp32_release_version);
-	SPRINTF("SCSI host No.:         %d\n",		hostno);
-	SPRINTF("IRQ:                   %d\n",		host->irq);
-	SPRINTF("IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
-	SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n",	host->base, host->base + data->MmioLength - 1);
-	SPRINTF("sg_tablesize:          %d\n",		host->sg_tablesize);
-	SPRINTF("Chip revision:         0x%x\n",       	(nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
+	seq_puts(m, "NinjaSCSI-32 status\n\n");
+	seq_printf(m, "Driver version:        %s, $Revision: 1.33 $\n", nsp32_release_version);
+	seq_printf(m, "SCSI host No.:         %d\n",		hostno);
+	seq_printf(m, "IRQ:                   %d\n",		host->irq);
+	seq_printf(m, "IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+	seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n",	host->base, host->base + data->MmioLength - 1);
+	seq_printf(m, "sg_tablesize:          %d\n",		host->sg_tablesize);
+	seq_printf(m, "Chip revision:         0x%x\n",		(nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
 
 	mode_reg = nsp32_index_read1(base, CHIP_MODE);
 	model    = data->pci_devid->driver_data;
 
 #ifdef CONFIG_PM
-	SPRINTF("Power Management:      %s\n",          (mode_reg & OPTF) ? "yes" : "no");
+	seq_printf(m, "Power Management:      %s\n",          (mode_reg & OPTF) ? "yes" : "no");
 #endif
-	SPRINTF("OEM:                   %ld, %s\n",     (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
+	seq_printf(m, "OEM:                   %ld, %s\n",     (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
 
 	spin_lock_irqsave(&(data->Lock), flags);
-	SPRINTF("CurrentSC:             0x%p\n\n",      data->CurrentSC);
+	seq_printf(m, "CurrentSC:             0x%p\n\n",      data->CurrentSC);
 	spin_unlock_irqrestore(&(data->Lock), flags);
 
 
-	SPRINTF("SDTR status\n");
+	seq_puts(m, "SDTR status\n");
 	for (id = 0; id < ARRAY_SIZE(data->target); id++) {
 
-                SPRINTF("id %d: ", id);
+		seq_printf(m, "id %d: ", id);
 
 		if (id == host->this_id) {
-			SPRINTF("----- NinjaSCSI-32 host adapter\n");
+			seq_puts(m, "----- NinjaSCSI-32 host adapter\n");
 			continue;
 		}
 
 		if (data->target[id].sync_flag == SDTR_DONE) {
 			if (data->target[id].period == 0            &&
 			    data->target[id].offset == ASYNC_OFFSET ) {
-				SPRINTF("async");
+				seq_puts(m, "async");
 			} else {
-				SPRINTF(" sync");
+				seq_puts(m, " sync");
 			}
 		} else {
-			SPRINTF(" none");
+			seq_puts(m, " none");
 		}
 
 		if (data->target[id].period != 0) {
 
 			speed = 1000000 / (data->target[id].period * 4);
 
-			SPRINTF(" transfer %d.%dMB/s, offset %d",
+			seq_printf(m, " transfer %d.%dMB/s, offset %d",
 				speed / 1000,
 				speed % 1000,
 				data->target[id].offset
 				);
 		}
-		SPRINTF("\n");
+		seq_putc(m, '\n');
 	}
 	return 0;
 }
-#undef SPRINTF
 
 
 

drivers/scsi/pcmcia/nsp_cs.c

@@ -1364,9 +1364,6 @@ static const char *nsp_info(struct Scsi_Host *shpnt)
 	return data->nspinfo;
 }
 
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
 static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
 {
 	int id;
@@ -1378,75 +1375,74 @@ static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
 	hostno = host->host_no;
 	data = (nsp_hw_data *)host->hostdata;
 
-	SPRINTF("NinjaSCSI status\n\n");
-	SPRINTF("Driver version:        $Revision: 1.23 $\n");
-	SPRINTF("SCSI host No.:         %d\n",          hostno);
-	SPRINTF("IRQ:                   %d\n",          host->irq);
-	SPRINTF("IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
-	SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
-	SPRINTF("sg_tablesize:          %d\n",          host->sg_tablesize);
+	seq_puts(m, "NinjaSCSI status\n\n"
+		"Driver version:        $Revision: 1.23 $\n");
+	seq_printf(m, "SCSI host No.:         %d\n",          hostno);
+	seq_printf(m, "IRQ:                   %d\n",          host->irq);
+	seq_printf(m, "IO:                    0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+	seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
+	seq_printf(m, "sg_tablesize:          %d\n",          host->sg_tablesize);
 
-	SPRINTF("burst transfer mode:   ");
+	seq_puts(m, "burst transfer mode:   ");
 	switch (nsp_burst_mode) {
 	case BURST_IO8:
-		SPRINTF("io8");
+		seq_puts(m, "io8");
 		break;
 	case BURST_IO32:
-		SPRINTF("io32");
+		seq_puts(m, "io32");
 		break;
 	case BURST_MEM32:
-		SPRINTF("mem32");
+		seq_puts(m, "mem32");
 		break;
 	default:
-		SPRINTF("???");
+		seq_puts(m, "???");
 		break;
 	}
-	SPRINTF("\n");
+	seq_putc(m, '\n');
 
 
 	spin_lock_irqsave(&(data->Lock), flags);
-	SPRINTF("CurrentSC:             0x%p\n\n",      data->CurrentSC);
+	seq_printf(m, "CurrentSC:             0x%p\n\n",      data->CurrentSC);
 	spin_unlock_irqrestore(&(data->Lock), flags);
 
-	SPRINTF("SDTR status\n");
+	seq_puts(m, "SDTR status\n");
 	for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
 
-		SPRINTF("id %d: ", id);
+		seq_printf(m, "id %d: ", id);
 
 		if (id == host->this_id) {
-			SPRINTF("----- NinjaSCSI-3 host adapter\n");
+			seq_puts(m, "----- NinjaSCSI-3 host adapter\n");
 			continue;
 		}
 
 		switch(data->Sync[id].SyncNegotiation) {
 		case SYNC_OK:
-			SPRINTF(" sync");
+			seq_puts(m, " sync");
 			break;
 		case SYNC_NG:
-			SPRINTF("async");
+			seq_puts(m, "async");
 			break;
 		case SYNC_NOT_YET:
-			SPRINTF(" none");
+			seq_puts(m, " none");
 			break;
 		default:
-			SPRINTF("?????");
+			seq_puts(m, "?????");
 			break;
 		}
 
 		if (data->Sync[id].SyncPeriod != 0) {
 			speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
 
-			SPRINTF(" transfer %d.%dMB/s, offset %d",
+			seq_printf(m, " transfer %d.%dMB/s, offset %d",
 				speed / 1000,
 				speed % 1000,
 				data->Sync[id].SyncOffset
 				);
 		}
-		SPRINTF("\n");
+		seq_putc(m, '\n');
 	}
 	return 0;
 }
-#undef SPRINTF
 
 /*---------------------------------------------------------------*/
 /* error handler                                                 */

drivers/scsi/qla2xxx/qla_dfs.c

@@ -23,10 +23,10 @@ qla2x00_dfs_fce_show(struct seq_file *s, void *unused)
 
 	mutex_lock(&ha->fce_mutex);
 
-	seq_printf(s, "FCE Trace Buffer\n");
+	seq_puts(s, "FCE Trace Buffer\n");
 	seq_printf(s, "In Pointer = %llx\n\n", (unsigned long long)ha->fce_wr);
 	seq_printf(s, "Base = %llx\n\n", (unsigned long long) ha->fce_dma);
-	seq_printf(s, "FCE Enable Registers\n");
+	seq_puts(s, "FCE Enable Registers\n");
 	seq_printf(s, "%08x %08x %08x %08x %08x %08x\n",
 	    ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4],
 	    ha->fce_mb[5], ha->fce_mb[6]);
@@ -38,11 +38,11 @@ qla2x00_dfs_fce_show(struct seq_file *s, void *unused)
 			seq_printf(s, "\n%llx: ",
 			    (unsigned long long)((cnt * 4) + fce_start));
 		else
-			seq_printf(s, " ");
+			seq_putc(s, ' ');
 		seq_printf(s, "%08x", *fce++);
 	}
 
-	seq_printf(s, "\nEnd\n");
+	seq_puts(s, "\nEnd\n");
 
 	mutex_unlock(&ha->fce_mutex);
 

drivers/scsi/scsi.c

@@ -531,7 +531,7 @@ void scsi_log_send(struct scsi_cmnd *cmd)
 	 *
 	 * 3: same as 2
 	 *
-	 * 4: same as 3 plus dump extra junk
+	 * 4: same as 3
 	 */
 	if (unlikely(scsi_logging_level)) {
 		level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
@@ -540,13 +540,6 @@ void scsi_log_send(struct scsi_cmnd *cmd)
 			scmd_printk(KERN_INFO, cmd,
 				    "Send: scmd 0x%p\n", cmd);
 			scsi_print_command(cmd);
-			if (level > 3) {
-				printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
-				       " queuecommand 0x%p\n",
-					scsi_sglist(cmd), scsi_bufflen(cmd),
-					cmd->device->host->hostt->queuecommand);
-
-			}
 		}
 	}
 }
@@ -572,7 +565,7 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 				       SCSI_LOG_MLCOMPLETE_BITS);
 		if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
 		    (level > 1)) {
-			scsi_print_result(cmd, "Done: ", disposition);
+			scsi_print_result(cmd, "Done", disposition);
 			scsi_print_command(cmd);
 			if (status_byte(cmd->result) & CHECK_CONDITION)
 				scsi_print_sense(cmd);

drivers/scsi/scsi_debug.c

@@ -80,6 +80,8 @@ static const char *scsi_debug_version_date = "20141022";
 #define INVALID_FIELD_IN_PARAM_LIST 0x26
 #define UA_RESET_ASC 0x29
 #define UA_CHANGED_ASC 0x2a
+#define TARGET_CHANGED_ASC 0x3f
+#define LUNS_CHANGED_ASCQ 0x0e
 #define INSUFF_RES_ASC 0x55
 #define INSUFF_RES_ASCQ 0x3
 #define POWER_ON_RESET_ASCQ 0x0
@@ -91,6 +93,8 @@ static const char *scsi_debug_version_date = "20141022";
 #define THRESHOLD_EXCEEDED 0x5d
 #define LOW_POWER_COND_ON 0x5e
 #define MISCOMPARE_VERIFY_ASC 0x1d
+#define MICROCODE_CHANGED_ASCQ 0x1	/* with TARGET_CHANGED_ASC */
+#define MICROCODE_CHANGED_WO_RESET_ASCQ 0x16
 
 /* Additional Sense Code Qualifier (ASCQ) */
 #define ACK_NAK_TO 0x3
@@ -180,7 +184,10 @@ static const char *scsi_debug_version_date = "20141022";
 #define SDEBUG_UA_BUS_RESET 1
 #define SDEBUG_UA_MODE_CHANGED 2
 #define SDEBUG_UA_CAPACITY_CHANGED 3
-#define SDEBUG_NUM_UAS 4
+#define SDEBUG_UA_LUNS_CHANGED 4
+#define SDEBUG_UA_MICROCODE_CHANGED 5	/* simulate firmware change */
+#define SDEBUG_UA_MICROCODE_CHANGED_WO_RESET 6
+#define SDEBUG_NUM_UAS 7
 
 /* for check_readiness() */
 #define UAS_ONLY 1	/* check for UAs only */
@@ -326,6 +333,7 @@ static int resp_write_same_10(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *);
 static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_write_buffer(struct scsi_cmnd *, struct sdebug_dev_info *);
 
 struct opcode_info_t {
 	u8 num_attached;	/* 0 if this is it (i.e. a leaf); use 0xff
@@ -480,8 +488,9 @@ static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
 	{0, 0x53, 0, F_D_IN | F_D_OUT | FF_DIRECT_IO, resp_xdwriteread_10,
 	    NULL, {10,  0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7,
 		   0, 0, 0, 0, 0, 0} },
-	{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* WRITE_BUFFER */
-	    {0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+	{0, 0x3b, 0, F_D_OUT_MAYBE, resp_write_buffer, NULL,
+	    {10,  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0,
+	     0, 0, 0, 0} },			/* WRITE_BUFFER */
 	{1, 0x41, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_10,
 	    write_same_iarr, {10,  0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff,
 			      0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
@@ -782,6 +791,22 @@ static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
 	/* return -ENOTTY; // correct return but upsets fdisk */
 }
 
+static void clear_luns_changed_on_target(struct sdebug_dev_info *devip)
+{
+	struct sdebug_host_info *sdhp;
+	struct sdebug_dev_info *dp;
+
+	spin_lock(&sdebug_host_list_lock);
+	list_for_each_entry(sdhp, &sdebug_host_list, host_list) {
+		list_for_each_entry(dp, &sdhp->dev_info_list, dev_list) {
+			if ((devip->sdbg_host == dp->sdbg_host) &&
+			    (devip->target == dp->target))
+				clear_bit(SDEBUG_UA_LUNS_CHANGED, dp->uas_bm);
+		}
+	}
+	spin_unlock(&sdebug_host_list_lock);
+}
+
 static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
 			   struct sdebug_dev_info * devip)
 {
@@ -817,6 +842,36 @@ static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
 			if (debug)
 				cp = "capacity data changed";
 			break;
+		case SDEBUG_UA_MICROCODE_CHANGED:
+			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+				 TARGET_CHANGED_ASC, MICROCODE_CHANGED_ASCQ);
+			if (debug)
+				cp = "microcode has been changed";
+			break;
+		case SDEBUG_UA_MICROCODE_CHANGED_WO_RESET:
+			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+					TARGET_CHANGED_ASC,
+					MICROCODE_CHANGED_WO_RESET_ASCQ);
+			if (debug)
+				cp = "microcode has been changed without reset";
+			break;
+		case SDEBUG_UA_LUNS_CHANGED:
+			/*
+			 * SPC-3 behavior is to report a UNIT ATTENTION with
+			 * ASC/ASCQ REPORTED LUNS DATA HAS CHANGED on every LUN
+			 * on the target, until a REPORT LUNS command is
+			 * received.  SPC-4 behavior is to report it only once.
+			 * NOTE:  scsi_debug_scsi_level does not use the same
+			 * values as struct scsi_device->scsi_level.
+			 */
+			if (scsi_debug_scsi_level >= 6)	/* SPC-4 and above */
+				clear_luns_changed_on_target(devip);
+			mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+					TARGET_CHANGED_ASC,
+					LUNS_CHANGED_ASCQ);
+			if (debug)
+				cp = "reported luns data has changed";
+			break;
 		default:
 			pr_warn("%s: unexpected unit attention code=%d\n",
 				__func__, k);
@@ -3033,6 +3088,55 @@ resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 	return resp_write_same(scp, lba, num, ei_lba, unmap, ndob);
 }
 
+/* Note the mode field is in the same position as the (lower) service action
+ * field. For the Report supported operation codes command, SPC-4 suggests
+ * each mode of this command should be reported separately; for future. */
+static int
+resp_write_buffer(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+	u8 *cmd = scp->cmnd;
+	struct scsi_device *sdp = scp->device;
+	struct sdebug_dev_info *dp;
+	u8 mode;
+
+	mode = cmd[1] & 0x1f;
+	switch (mode) {
+	case 0x4:	/* download microcode (MC) and activate (ACT) */
+		/* set UAs on this device only */
+		set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm);
+		set_bit(SDEBUG_UA_MICROCODE_CHANGED, devip->uas_bm);
+		break;
+	case 0x5:	/* download MC, save and ACT */
+		set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET, devip->uas_bm);
+		break;
+	case 0x6:	/* download MC with offsets and ACT */
+		/* set UAs on most devices (LUs) in this target */
+		list_for_each_entry(dp,
+				    &devip->sdbg_host->dev_info_list,
+				    dev_list)
+			if (dp->target == sdp->id) {
+				set_bit(SDEBUG_UA_BUS_RESET, dp->uas_bm);
+				if (devip != dp)
+					set_bit(SDEBUG_UA_MICROCODE_CHANGED,
+						dp->uas_bm);
+			}
+		break;
+	case 0x7:	/* download MC with offsets, save, and ACT */
+		/* set UA on all devices (LUs) in this target */
+		list_for_each_entry(dp,
+				    &devip->sdbg_host->dev_info_list,
+				    dev_list)
+			if (dp->target == sdp->id)
+				set_bit(SDEBUG_UA_MICROCODE_CHANGED_WO_RESET,
+					dp->uas_bm);
+		break;
+	default:
+		/* do nothing for this command for other mode values */
+		break;
+	}
+	return 0;
+}
+
 static int
 resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
 {
@@ -3229,6 +3333,7 @@ static int resp_report_luns(struct scsi_cmnd * scp,
 	unsigned char arr[SDEBUG_RLUN_ARR_SZ];
 	unsigned char * max_addr;
 
+	clear_luns_changed_on_target(devip);
 	alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
 	shortish = (alloc_len < 4);
 	if (shortish || (select_report > 2)) {
@@ -4369,10 +4474,27 @@ static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
 			      size_t count)
 {
         int n;
+	bool changed;
 
 	if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+		changed = (scsi_debug_max_luns != n);
 		scsi_debug_max_luns = n;
 		sdebug_max_tgts_luns();
+		if (changed && (scsi_debug_scsi_level >= 5)) {	/* >= SPC-3 */
+			struct sdebug_host_info *sdhp;
+			struct sdebug_dev_info *dp;
+
+			spin_lock(&sdebug_host_list_lock);
+			list_for_each_entry(sdhp, &sdebug_host_list,
+					    host_list) {
+				list_for_each_entry(dp, &sdhp->dev_info_list,
+						    dev_list) {
+					set_bit(SDEBUG_UA_LUNS_CHANGED,
+						dp->uas_bm);
+				}
+			}
+			spin_unlock(&sdebug_host_list_lock);
+		}
 		return count;
 	}
 	return -EINVAL;

drivers/scsi/scsi_error.c

@@ -124,41 +124,37 @@ scmd_eh_abort_handler(struct work_struct *work)
 	if (scsi_host_eh_past_deadline(sdev->host)) {
 		SCSI_LOG_ERROR_RECOVERY(3,
 			scmd_printk(KERN_INFO, scmd,
-				    "scmd %p eh timeout, not aborting\n",
-				    scmd));
+				    "eh timeout, not aborting\n"));
 	} else {
 		SCSI_LOG_ERROR_RECOVERY(3,
 			scmd_printk(KERN_INFO, scmd,
-				    "aborting command %p\n", scmd));
+				    "aborting command\n"));
 		rtn = scsi_try_to_abort_cmd(sdev->host->hostt, scmd);
 		if (rtn == SUCCESS) {
 			set_host_byte(scmd, DID_TIME_OUT);
 			if (scsi_host_eh_past_deadline(sdev->host)) {
 				SCSI_LOG_ERROR_RECOVERY(3,
 					scmd_printk(KERN_INFO, scmd,
-						    "scmd %p eh timeout, "
-						    "not retrying aborted "
-						    "command\n", scmd));
+						    "eh timeout, not retrying "
+						    "aborted command\n"));
 			} else if (!scsi_noretry_cmd(scmd) &&
 			    (++scmd->retries <= scmd->allowed)) {
 				SCSI_LOG_ERROR_RECOVERY(3,
 					scmd_printk(KERN_WARNING, scmd,
-						    "scmd %p retry "
-						    "aborted command\n", scmd));
+						    "retry aborted command\n"));
 				scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
 				return;
 			} else {
 				SCSI_LOG_ERROR_RECOVERY(3,
 					scmd_printk(KERN_WARNING, scmd,
-						    "scmd %p finish "
-						    "aborted command\n", scmd));
+						    "finish aborted command\n"));
 				scsi_finish_command(scmd);
 				return;
 			}
 		} else {
 			SCSI_LOG_ERROR_RECOVERY(3,
 				scmd_printk(KERN_INFO, scmd,
-					    "scmd %p abort %s\n", scmd,
+					    "cmd abort %s\n",
 					    (rtn == FAST_IO_FAIL) ?
 					    "not send" : "failed"));
 		}
@@ -167,8 +163,7 @@ scmd_eh_abort_handler(struct work_struct *work)
 	if (!scsi_eh_scmd_add(scmd, 0)) {
 		SCSI_LOG_ERROR_RECOVERY(3,
 			scmd_printk(KERN_WARNING, scmd,
-				    "scmd %p terminate "
-				    "aborted command\n", scmd));
+				    "terminate aborted command\n"));
 		set_host_byte(scmd, DID_TIME_OUT);
 		scsi_finish_command(scmd);
 	}
@@ -194,7 +189,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
 		scmd->eh_eflags &= ~SCSI_EH_ABORT_SCHEDULED;
 		SCSI_LOG_ERROR_RECOVERY(3,
 			scmd_printk(KERN_INFO, scmd,
-				    "scmd %p previous abort failed\n", scmd));
+				    "previous abort failed\n"));
 		BUG_ON(delayed_work_pending(&scmd->abort_work));
 		return FAILED;
 	}
@@ -208,8 +203,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
 		spin_unlock_irqrestore(shost->host_lock, flags);
 		SCSI_LOG_ERROR_RECOVERY(3,
 			scmd_printk(KERN_INFO, scmd,
-				    "scmd %p not aborting, host in recovery\n",
-				    scmd));
+				    "not aborting, host in recovery\n"));
 		return FAILED;
 	}
 
@@ -219,8 +213,7 @@ scsi_abort_command(struct scsi_cmnd *scmd)
 
 	scmd->eh_eflags |= SCSI_EH_ABORT_SCHEDULED;
 	SCSI_LOG_ERROR_RECOVERY(3,
-		scmd_printk(KERN_INFO, scmd,
-			    "scmd %p abort scheduled\n", scmd));
+		scmd_printk(KERN_INFO, scmd, "abort scheduled\n"));
 	queue_delayed_work(shost->tmf_work_q, &scmd->abort_work, HZ / 100);
 	return SUCCESS;
 }
@@ -737,8 +730,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
 	struct completion *eh_action;
 
 	SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
-			"%s scmd: %p result: %x\n",
-			__func__, scmd, scmd->result));
+			"%s result: %x\n", __func__, scmd->result));
 
 	eh_action = scmd->device->host->eh_action;
 	if (eh_action)
@@ -868,6 +860,7 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
 
 /**
  * scsi_try_to_abort_cmd - Ask host to abort a SCSI command
+ * @hostt:	SCSI driver host template
  * @scmd:	SCSI cmd used to send a target reset
  *
  * Return value:
@@ -1052,8 +1045,8 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 	scsi_log_completion(scmd, rtn);
 
 	SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
-			"%s: scmd: %p, timeleft: %ld\n",
-			__func__, scmd, timeleft));
+			"%s timeleft: %ld\n",
+			__func__, timeleft));
 
 	/*
 	 * If there is time left scsi_eh_done got called, and we will examine
@@ -1192,8 +1185,7 @@ int scsi_eh_get_sense(struct list_head *work_q,
 			continue;
 
 		SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
-			"sense requested for %p result %x\n",
-			scmd, scmd->result));
+			"sense requested, result %x\n", scmd->result));
 		SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
 
 		rtn = scsi_decide_disposition(scmd);
@@ -1235,7 +1227,7 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd)
 				scmd->device->eh_timeout, 0);
 
 	SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
-		"%s: scmd %p rtn %x\n", __func__, scmd, rtn));
+		"%s return: %x\n", __func__, rtn));
 
 	switch (rtn) {
 	case NEEDS_RETRY:
@@ -2092,8 +2084,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q)
 		    (++scmd->retries <= scmd->allowed)) {
 			SCSI_LOG_ERROR_RECOVERY(3,
 				scmd_printk(KERN_INFO, scmd,
-					     "%s: flush retry cmd: %p\n",
-					     current->comm, scmd));
+					     "%s: flush retry cmd\n",
+					     current->comm));
 				scsi_queue_insert(scmd, SCSI_MLQUEUE_EH_RETRY);
 		} else {
 			/*
@@ -2105,8 +2097,8 @@ void scsi_eh_flush_done_q(struct list_head *done_q)
 				scmd->result |= (DRIVER_TIMEOUT << 24);
 			SCSI_LOG_ERROR_RECOVERY(3,
 				scmd_printk(KERN_INFO, scmd,
-					     "%s: flush finish cmd: %p\n",
-					     current->comm, scmd));
+					     "%s: flush finish cmd\n",
+					     current->comm));
 			scsi_finish_command(scmd);
 		}
 	}

drivers/scsi/scsi_logging.c

@@ -0,0 +1,485 @@
+/*
+ * scsi_logging.c
+ *
+ * Copyright (C) 2014 SUSE Linux Products GmbH
+ * Copyright (C) 2014 Hannes Reinecke <hare@suse.de>
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/atomic.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
+
+#define SCSI_LOG_SPOOLSIZE 4096
+
+#if (SCSI_LOG_SPOOLSIZE / SCSI_LOG_BUFSIZE) > BITS_PER_LONG
+#warning SCSI logging bitmask too large
+#endif
+
+struct scsi_log_buf {
+	char buffer[SCSI_LOG_SPOOLSIZE];
+	unsigned long map;
+};
+
+static DEFINE_PER_CPU(struct scsi_log_buf, scsi_format_log);
+
+static char *scsi_log_reserve_buffer(size_t *len)
+{
+	struct scsi_log_buf *buf;
+	unsigned long map_bits = sizeof(buf->buffer) / SCSI_LOG_BUFSIZE;
+	unsigned long idx = 0;
+
+	preempt_disable();
+	buf = this_cpu_ptr(&scsi_format_log);
+	idx = find_first_zero_bit(&buf->map, map_bits);
+	if (likely(idx < map_bits)) {
+		while (test_and_set_bit(idx, &buf->map)) {
+			idx = find_next_zero_bit(&buf->map, map_bits, idx);
+			if (idx >= map_bits)
+				break;
+		}
+	}
+	if (WARN_ON(idx >= map_bits)) {
+		preempt_enable();
+		return NULL;
+	}
+	*len = SCSI_LOG_BUFSIZE;
+	return buf->buffer + idx * SCSI_LOG_BUFSIZE;
+}
+
+static void scsi_log_release_buffer(char *bufptr)
+{
+	struct scsi_log_buf *buf;
+	unsigned long idx;
+	int ret;
+
+	buf = this_cpu_ptr(&scsi_format_log);
+	if (bufptr >= buf->buffer &&
+	    bufptr < buf->buffer + SCSI_LOG_SPOOLSIZE) {
+		idx = (bufptr - buf->buffer) / SCSI_LOG_BUFSIZE;
+		ret = test_and_clear_bit(idx, &buf->map);
+		WARN_ON(!ret);
+	}
+	preempt_enable();
+}
+
+static inline const char *scmd_name(const struct scsi_cmnd *scmd)
+{
+	return scmd->request->rq_disk ?
+		scmd->request->rq_disk->disk_name : NULL;
+}
+
+static size_t sdev_format_header(char *logbuf, size_t logbuf_len,
+				 const char *name, int tag)
+{
+	size_t off = 0;
+
+	if (name)
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "[%s] ", name);
+
+	if (WARN_ON(off >= logbuf_len))
+		return off;
+
+	if (tag >= 0)
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "tag#%d ", tag);
+	return off;
+}
+
+void sdev_prefix_printk(const char *level, const struct scsi_device *sdev,
+			const char *name, const char *fmt, ...)
+{
+	va_list args;
+	char *logbuf;
+	size_t off = 0, logbuf_len;
+
+	if (!sdev)
+		return;
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+
+	if (name)
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "[%s] ", name);
+	if (!WARN_ON(off >= logbuf_len)) {
+		va_start(args, fmt);
+		off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args);
+		va_end(args);
+	}
+	dev_printk(level, &sdev->sdev_gendev, "%s", logbuf);
+	scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(sdev_prefix_printk);
+
+void scmd_printk(const char *level, const struct scsi_cmnd *scmd,
+		const char *fmt, ...)
+{
+	va_list args;
+	char *logbuf;
+	size_t off = 0, logbuf_len;
+
+	if (!scmd || !scmd->cmnd)
+		return;
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+	off = sdev_format_header(logbuf, logbuf_len, scmd_name(scmd),
+				 scmd->request->tag);
+	if (off < logbuf_len) {
+		va_start(args, fmt);
+		off += vscnprintf(logbuf + off, logbuf_len - off, fmt, args);
+		va_end(args);
+	}
+	dev_printk(level, &scmd->device->sdev_gendev, "%s", logbuf);
+	scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(scmd_printk);
+
+static size_t scsi_format_opcode_name(char *buffer, size_t buf_len,
+				      const unsigned char *cdbp)
+{
+	int sa, cdb0;
+	const char *cdb_name = NULL, *sa_name = NULL;
+	size_t off;
+
+	cdb0 = cdbp[0];
+	if (cdb0 == VARIABLE_LENGTH_CMD) {
+		int len = scsi_varlen_cdb_length(cdbp);
+
+		if (len < 10) {
+			off = scnprintf(buffer, buf_len,
+					"short variable length command, len=%d",
+					len);
+			return off;
+		}
+		sa = (cdbp[8] << 8) + cdbp[9];
+	} else
+		sa = cdbp[1] & 0x1f;
+
+	if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) {
+		if (cdb_name)
+			off = scnprintf(buffer, buf_len, "%s", cdb_name);
+		else {
+			off = scnprintf(buffer, buf_len, "opcode=0x%x", cdb0);
+			if (WARN_ON(off >= buf_len))
+				return off;
+			if (cdb0 >= VENDOR_SPECIFIC_CDB)
+				off += scnprintf(buffer + off, buf_len - off,
+						 " (vendor)");
+			else if (cdb0 >= 0x60 && cdb0 < 0x7e)
+				off += scnprintf(buffer + off, buf_len - off,
+						 " (reserved)");
+		}
+	} else {
+		if (sa_name)
+			off = scnprintf(buffer, buf_len, "%s", sa_name);
+		else if (cdb_name)
+			off = scnprintf(buffer, buf_len, "%s, sa=0x%x",
+					cdb_name, sa);
+		else
+			off = scnprintf(buffer, buf_len,
+					"opcode=0x%x, sa=0x%x", cdb0, sa);
+	}
+	WARN_ON(off >= buf_len);
+	return off;
+}
+
+size_t __scsi_format_command(char *logbuf, size_t logbuf_len,
+			     const unsigned char *cdb, size_t cdb_len)
+{
+	int len, k;
+	size_t off;
+
+	off = scsi_format_opcode_name(logbuf, logbuf_len, cdb);
+	if (off >= logbuf_len)
+		return off;
+	len = scsi_command_size(cdb);
+	if (cdb_len < len)
+		len = cdb_len;
+	/* print out all bytes in cdb */
+	for (k = 0; k < len; ++k) {
+		if (off > logbuf_len - 3)
+			break;
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 " %02x", cdb[k]);
+	}
+	return off;
+}
+EXPORT_SYMBOL(__scsi_format_command);
+
+void scsi_print_command(struct scsi_cmnd *cmd)
+{
+	int k;
+	char *logbuf;
+	size_t off, logbuf_len;
+
+	if (!cmd->cmnd)
+		return;
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+
+	off = sdev_format_header(logbuf, logbuf_len,
+				 scmd_name(cmd), cmd->request->tag);
+	if (off >= logbuf_len)
+		goto out_printk;
+	off += scnprintf(logbuf + off, logbuf_len - off, "CDB: ");
+	if (WARN_ON(off >= logbuf_len))
+		goto out_printk;
+
+	off += scsi_format_opcode_name(logbuf + off, logbuf_len - off,
+				       cmd->cmnd);
+	if (off >= logbuf_len)
+		goto out_printk;
+
+	/* print out all bytes in cdb */
+	if (cmd->cmd_len > 16) {
+		/* Print opcode in one line and use separate lines for CDB */
+		off += scnprintf(logbuf + off, logbuf_len - off, "\n");
+		dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
+		scsi_log_release_buffer(logbuf);
+		for (k = 0; k < cmd->cmd_len; k += 16) {
+			size_t linelen = min(cmd->cmd_len - k, 16);
+
+			logbuf = scsi_log_reserve_buffer(&logbuf_len);
+			if (!logbuf)
+				break;
+			off = sdev_format_header(logbuf, logbuf_len,
+						 scmd_name(cmd),
+						 cmd->request->tag);
+			if (!WARN_ON(off > logbuf_len - 58)) {
+				off += scnprintf(logbuf + off, logbuf_len - off,
+						 "CDB[%02x]: ", k);
+				hex_dump_to_buffer(&cmd->cmnd[k], linelen,
+						   16, 1, logbuf + off,
+						   logbuf_len - off, false);
+			}
+			dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s",
+				   logbuf);
+			scsi_log_release_buffer(logbuf);
+		}
+		return;
+	}
+	if (!WARN_ON(off > logbuf_len - 49)) {
+		off += scnprintf(logbuf + off, logbuf_len - off, " ");
+		hex_dump_to_buffer(cmd->cmnd, cmd->cmd_len, 16, 1,
+				   logbuf + off, logbuf_len - off,
+				   false);
+	}
+out_printk:
+	dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
+	scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(scsi_print_command);
+
+static size_t
+scsi_format_extd_sense(char *buffer, size_t buf_len,
+		       unsigned char asc, unsigned char ascq)
+{
+	size_t off = 0;
+	const char *extd_sense_fmt = NULL;
+	const char *extd_sense_str = scsi_extd_sense_format(asc, ascq,
+							    &extd_sense_fmt);
+
+	if (extd_sense_str) {
+		off = scnprintf(buffer, buf_len, "Add. Sense: %s",
+				extd_sense_str);
+		if (extd_sense_fmt)
+			off += scnprintf(buffer + off, buf_len - off,
+					 "(%s%x)", extd_sense_fmt, ascq);
+	} else {
+		if (asc >= 0x80)
+			off = scnprintf(buffer, buf_len, "<<vendor>>");
+		off += scnprintf(buffer + off, buf_len - off,
+				 "ASC=0x%x ", asc);
+		if (ascq >= 0x80)
+			off += scnprintf(buffer + off, buf_len - off,
+					 "<<vendor>>");
+		off += scnprintf(buffer + off, buf_len - off,
+				 "ASCQ=0x%x ", ascq);
+	}
+	return off;
+}
+
+static size_t
+scsi_format_sense_hdr(char *buffer, size_t buf_len,
+		      const struct scsi_sense_hdr *sshdr)
+{
+	const char *sense_txt;
+	size_t off;
+
+	off = scnprintf(buffer, buf_len, "Sense Key : ");
+	sense_txt = scsi_sense_key_string(sshdr->sense_key);
+	if (sense_txt)
+		off += scnprintf(buffer + off, buf_len - off,
+				 "%s ", sense_txt);
+	else
+		off += scnprintf(buffer + off, buf_len - off,
+				 "0x%x ", sshdr->sense_key);
+	off += scnprintf(buffer + off, buf_len - off,
+		scsi_sense_is_deferred(sshdr) ? "[deferred] " : "[current] ");
+
+	if (sshdr->response_code >= 0x72)
+		off += scnprintf(buffer + off, buf_len - off, "[descriptor] ");
+	return off;
+}
+
+static void
+scsi_log_dump_sense(const struct scsi_device *sdev, const char *name, int tag,
+		    const unsigned char *sense_buffer, int sense_len)
+{
+	char *logbuf;
+	size_t logbuf_len;
+	int i;
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+
+	for (i = 0; i < sense_len; i += 16) {
+		int len = min(sense_len - i, 16);
+		size_t off;
+
+		off = sdev_format_header(logbuf, logbuf_len,
+					 name, tag);
+		hex_dump_to_buffer(&sense_buffer[i], len, 16, 1,
+				   logbuf + off, logbuf_len - off,
+				   false);
+		dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf);
+	}
+	scsi_log_release_buffer(logbuf);
+}
+
+static void
+scsi_log_print_sense_hdr(const struct scsi_device *sdev, const char *name,
+			 int tag, const struct scsi_sense_hdr *sshdr)
+{
+	char *logbuf;
+	size_t off, logbuf_len;
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+	off = sdev_format_header(logbuf, logbuf_len, name, tag);
+	off += scsi_format_sense_hdr(logbuf + off, logbuf_len - off, sshdr);
+	dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf);
+	scsi_log_release_buffer(logbuf);
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+	off = sdev_format_header(logbuf, logbuf_len, name, tag);
+	off += scsi_format_extd_sense(logbuf + off, logbuf_len - off,
+				      sshdr->asc, sshdr->ascq);
+	dev_printk(KERN_INFO, &sdev->sdev_gendev, "%s", logbuf);
+	scsi_log_release_buffer(logbuf);
+}
+
+static void
+scsi_log_print_sense(const struct scsi_device *sdev, const char *name, int tag,
+		     const unsigned char *sense_buffer, int sense_len)
+{
+	struct scsi_sense_hdr sshdr;
+
+	if (scsi_normalize_sense(sense_buffer, sense_len, &sshdr))
+		scsi_log_print_sense_hdr(sdev, name, tag, &sshdr);
+	else
+		scsi_log_dump_sense(sdev, name, tag, sense_buffer, sense_len);
+}
+
+/*
+ * Print normalized SCSI sense header with a prefix.
+ */
+void
+scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name,
+		     const struct scsi_sense_hdr *sshdr)
+{
+	scsi_log_print_sense_hdr(sdev, name, -1, sshdr);
+}
+EXPORT_SYMBOL(scsi_print_sense_hdr);
+
+/* Normalize and print sense buffer with name prefix */
+void __scsi_print_sense(const struct scsi_device *sdev, const char *name,
+			const unsigned char *sense_buffer, int sense_len)
+{
+	scsi_log_print_sense(sdev, name, -1, sense_buffer, sense_len);
+}
+EXPORT_SYMBOL(__scsi_print_sense);
+
+/* Normalize and print sense buffer in SCSI command */
+void scsi_print_sense(const struct scsi_cmnd *cmd)
+{
+	scsi_log_print_sense(cmd->device, scmd_name(cmd), cmd->request->tag,
+			     cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+}
+EXPORT_SYMBOL(scsi_print_sense);
+
+void scsi_print_result(const struct scsi_cmnd *cmd, const char *msg,
+		       int disposition)
+{
+	char *logbuf;
+	size_t off, logbuf_len;
+	const char *mlret_string = scsi_mlreturn_string(disposition);
+	const char *hb_string = scsi_hostbyte_string(cmd->result);
+	const char *db_string = scsi_driverbyte_string(cmd->result);
+
+	logbuf = scsi_log_reserve_buffer(&logbuf_len);
+	if (!logbuf)
+		return;
+
+	off = sdev_format_header(logbuf, logbuf_len,
+				 scmd_name(cmd), cmd->request->tag);
+
+	if (off >= logbuf_len)
+		goto out_printk;
+
+	if (msg) {
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "%s: ", msg);
+		if (WARN_ON(off >= logbuf_len))
+			goto out_printk;
+	}
+	if (mlret_string)
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "%s ", mlret_string);
+	else
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "UNKNOWN(0x%02x) ", disposition);
+	if (WARN_ON(off >= logbuf_len))
+		goto out_printk;
+
+	off += scnprintf(logbuf + off, logbuf_len - off, "Result: ");
+	if (WARN_ON(off >= logbuf_len))
+		goto out_printk;
+
+	if (hb_string)
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "hostbyte=%s ", hb_string);
+	else
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "hostbyte=0x%02x ", host_byte(cmd->result));
+	if (WARN_ON(off >= logbuf_len))
+		goto out_printk;
+
+	if (db_string)
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "driverbyte=%s", db_string);
+	else
+		off += scnprintf(logbuf + off, logbuf_len - off,
+				 "driverbyte=0x%02x", driver_byte(cmd->result));
+out_printk:
+	dev_printk(KERN_INFO, &cmd->device->sdev_gendev, "%s", logbuf);
+	scsi_log_release_buffer(logbuf);
+}
+EXPORT_SYMBOL(scsi_print_result);

drivers/scsi/scsi_proc.c

@@ -189,36 +189,36 @@ static int proc_print_scsidevice(struct device *dev, void *data)
 		sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
 	for (i = 0; i < 8; i++) {
 		if (sdev->vendor[i] >= 0x20)
-			seq_printf(s, "%c", sdev->vendor[i]);
+			seq_putc(s, sdev->vendor[i]);
 		else
-			seq_printf(s, " ");
+			seq_putc(s, ' ');
 	}
 
-	seq_printf(s, " Model: ");
+	seq_puts(s, " Model: ");
 	for (i = 0; i < 16; i++) {
 		if (sdev->model[i] >= 0x20)
-			seq_printf(s, "%c", sdev->model[i]);
+			seq_putc(s, sdev->model[i]);
 		else
-			seq_printf(s, " ");
+			seq_putc(s, ' ');
 	}
 
-	seq_printf(s, " Rev: ");
+	seq_puts(s, " Rev: ");
 	for (i = 0; i < 4; i++) {
 		if (sdev->rev[i] >= 0x20)
-			seq_printf(s, "%c", sdev->rev[i]);
+			seq_putc(s, sdev->rev[i]);
 		else
-			seq_printf(s, " ");
+			seq_putc(s, ' ');
 	}
 
-	seq_printf(s, "\n");
+	seq_putc(s, '\n');
 
 	seq_printf(s, "  Type:   %s ", scsi_device_type(sdev->type));
 	seq_printf(s, "               ANSI  SCSI revision: %02x",
 			sdev->scsi_level - (sdev->scsi_level > 1));
 	if (sdev->scsi_level == 2)
-		seq_printf(s, " CCS\n");
+		seq_puts(s, " CCS\n");
 	else
-		seq_printf(s, "\n");
+		seq_putc(s, '\n');
 
 out:
 	return 0;

drivers/scsi/scsi_scan.c

@@ -34,6 +34,7 @@
 #include <linux/spinlock.h>
 #include <linux/async.h>
 #include <linux/slab.h>
+#include <asm/unaligned.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -98,20 +99,6 @@ char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT;
 module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO);
 MODULE_PARM_DESC(scan, "sync, async or none");
 
-/*
- * max_scsi_report_luns: the maximum number of LUNS that will be
- * returned from the REPORT LUNS command. 8 times this value must
- * be allocated. In theory this could be up to an 8 byte value, but
- * in practice, the maximum number of LUNs suppored by any device
- * is about 16k.
- */
-static unsigned int max_scsi_report_luns = 511;
-
-module_param_named(max_report_luns, max_scsi_report_luns, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(max_report_luns,
-		 "REPORT LUNS maximum number of LUNS received (should be"
-		 " between 1 and 16384)");
-
 static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
 
 module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
@@ -1367,7 +1354,6 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	unsigned int retries;
 	int result;
 	struct scsi_lun *lunp, *lun_data;
-	u8 *data;
 	struct scsi_sense_hdr sshdr;
 	struct scsi_device *sdev;
 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
@@ -1407,16 +1393,12 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 
 	/*
 	 * Allocate enough to hold the header (the same size as one scsi_lun)
-	 * plus the max number of luns we are requesting.
-	 *
-	 * Reallocating and trying again (with the exact amount we need)
-	 * would be nice, but then we need to somehow limit the size
-	 * allocated based on the available memory and the limits of
-	 * kmalloc - we don't want a kmalloc() failure of a huge value to
-	 * prevent us from finding any LUNs on this target.
+	 * plus the number of luns we are requesting.  511 was the default
+	 * value of the now removed max_report_luns parameter.
 	 */
-	length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun);
-	lun_data = kmalloc(length, GFP_ATOMIC |
+	length = (511 + 1) * sizeof(struct scsi_lun);
+retry:
+	lun_data = kmalloc(length, GFP_KERNEL |
 			   (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
 	if (!lun_data) {
 		printk(ALLOC_FAILURE_MSG, __func__);
@@ -1433,10 +1415,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	/*
 	 * bytes 6 - 9: length of the command.
 	 */
-	scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff;
-	scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff;
-	scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff;
-	scsi_cmd[9] = (unsigned char) length & 0xff;
+	put_unaligned_be32(length, &scsi_cmd[6]);
 
 	scsi_cmd[10] = 0;	/* reserved */
 	scsi_cmd[11] = 0;	/* control */
@@ -1484,19 +1463,16 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	/*
 	 * Get the length from the first four bytes of lun_data.
 	 */
-	data = (u8 *) lun_data->scsi_lun;
-	length = ((data[0] << 24) | (data[1] << 16) |
-		  (data[2] << 8) | (data[3] << 0));
+	if (get_unaligned_be32(lun_data->scsi_lun) +
+	    sizeof(struct scsi_lun) > length) {
+		length = get_unaligned_be32(lun_data->scsi_lun) +
+			 sizeof(struct scsi_lun);
+		kfree(lun_data);
+		goto retry;
+	}
+	length = get_unaligned_be32(lun_data->scsi_lun);
 
 	num_luns = (length / sizeof(struct scsi_lun));
-	if (num_luns > max_scsi_report_luns) {
-		sdev_printk(KERN_WARNING, sdev,
-			    "Only %d (max_scsi_report_luns)"
-			    " of %d luns reported, try increasing"
-			    " max_scsi_report_luns.\n",
-			    max_scsi_report_luns, num_luns);
-		num_luns = max_scsi_report_luns;
-	}
 
 	SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
 		"scsi scan: REPORT LUN scan\n"));

drivers/scsi/scsi_trace.c

@@ -143,7 +143,7 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len)
 		cmd = "WRITE_SAME";
 		break;
 	default:
-		trace_seq_printf(p, "UNKNOWN");
+		trace_seq_puts(p, "UNKNOWN");
 		goto out;
 	}
 
@@ -204,7 +204,7 @@ scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len)
 		cmd = "GET_LBA_STATUS";
 		break;
 	default:
-		trace_seq_printf(p, "UNKNOWN");
+		trace_seq_puts(p, "UNKNOWN");
 		goto out;
 	}
 
@@ -249,7 +249,7 @@ scsi_trace_misc(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
 
-	trace_seq_printf(p, "-");
+	trace_seq_putc(p, '-');
 	trace_seq_putc(p, 0);
 
 	return ret;

drivers/scsi/sd.c

@@ -3320,11 +3320,8 @@ module_exit(exit_sd);
 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
 			       struct scsi_sense_hdr *sshdr)
 {
-	scsi_show_sense_hdr(sdkp->device,
-			    sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
-	scsi_show_extd_sense(sdkp->device,
-			     sdkp->disk ? sdkp->disk->disk_name : NULL,
-			     sshdr->asc, sshdr->ascq);
+	scsi_print_sense_hdr(sdkp->device,
+			     sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
 }
 
 static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,

drivers/scsi/ses.c

@@ -47,7 +47,6 @@ struct ses_device {
 
 struct ses_component {
 	u64 addr;
-	unsigned char *desc;
 };
 
 static int ses_probe(struct device *dev)
@@ -68,6 +67,20 @@ static int ses_probe(struct device *dev)
 #define SES_TIMEOUT (30 * HZ)
 #define SES_RETRIES 3
 
+static void init_device_slot_control(unsigned char *dest_desc,
+				     struct enclosure_component *ecomp,
+				     unsigned char *status)
+{
+	memcpy(dest_desc, status, 4);
+	dest_desc[0] = 0;
+	/* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
+	if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
+		dest_desc[1] = 0;
+	dest_desc[2] &= 0xde;
+	dest_desc[3] &= 0x3c;
+}
+
+
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
@@ -179,14 +192,22 @@ static int ses_set_fault(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp,
 			 enum enclosure_component_setting val)
 {
-	unsigned char desc[4] = {0 };
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
 
 	switch (val) {
 	case ENCLOSURE_SETTING_DISABLED:
-		/* zero is disabled */
+		desc[3] &= 0xdf;
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[3] = 0x20;
+		desc[3] |= 0x20;
 		break;
 	default:
 		/* SES doesn't do the SGPIO blink settings */
@@ -220,14 +241,22 @@ static int ses_set_locate(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp,
 			  enum enclosure_component_setting val)
 {
-	unsigned char desc[4] = {0 };
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
 
 	switch (val) {
 	case ENCLOSURE_SETTING_DISABLED:
-		/* zero is disabled */
+		desc[2] &= 0xfd;
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[2] = 0x02;
+		desc[2] |= 0x02;
 		break;
 	default:
 		/* SES doesn't do the SGPIO blink settings */
@@ -240,15 +269,23 @@ static int ses_set_active(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp,
 			  enum enclosure_component_setting val)
 {
-	unsigned char desc[4] = {0 };
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
 
 	switch (val) {
 	case ENCLOSURE_SETTING_DISABLED:
-		/* zero is disabled */
+		desc[2] &= 0x7f;
 		ecomp->active = 0;
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[2] = 0x80;
+		desc[2] |= 0x80;
 		ecomp->active = 1;
 		break;
 	default:
@@ -258,13 +295,63 @@ static int ses_set_active(struct enclosure_device *edev,
 	return ses_set_page2_descriptor(edev, ecomp, desc);
 }
 
+static int ses_show_id(struct enclosure_device *edev, char *buf)
+{
+	struct ses_device *ses_dev = edev->scratch;
+	unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4);
+
+	return sprintf(buf, "%#llx\n", id);
+}
+
+static void ses_get_power_status(struct enclosure_device *edev,
+				 struct enclosure_component *ecomp)
+{
+	unsigned char *desc;
+
+	desc = ses_get_page2_descriptor(edev, ecomp);
+	if (desc)
+		ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
+}
+
+static int ses_set_power_status(struct enclosure_device *edev,
+				struct enclosure_component *ecomp,
+				int val)
+{
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
+
+	switch (val) {
+	/* power = 1 is device_off = 0 and vice versa */
+	case 0:
+		desc[3] |= 0x10;
+		break;
+	case 1:
+		desc[3] &= 0xef;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ecomp->power_status = val;
+	return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
 static struct enclosure_component_callbacks ses_enclosure_callbacks = {
 	.get_fault		= ses_get_fault,
 	.set_fault		= ses_set_fault,
 	.get_status		= ses_get_status,
 	.get_locate		= ses_get_locate,
 	.set_locate		= ses_set_locate,
+	.get_power_status	= ses_get_power_status,
+	.set_power_status	= ses_set_power_status,
 	.set_active		= ses_set_active,
+	.show_id		= ses_show_id,
 };
 
 struct ses_host_edev {
@@ -298,19 +385,26 @@ static void ses_process_descriptor(struct enclosure_component *ecomp,
 	int invalid = desc[0] & 0x80;
 	enum scsi_protocol proto = desc[0] & 0x0f;
 	u64 addr = 0;
+	int slot = -1;
 	struct ses_component *scomp = ecomp->scratch;
 	unsigned char *d;
 
-	scomp->desc = desc;
-
 	if (invalid)
 		return;
 
 	switch (proto) {
+	case SCSI_PROTOCOL_FCP:
+		if (eip) {
+			d = desc + 4;
+			slot = d[3];
+		}
+		break;
 	case SCSI_PROTOCOL_SAS:
-		if (eip)
+		if (eip) {
+			d = desc + 4;
+			slot = d[3];
 			d = desc + 8;
-		else
+		} else
 			d = desc + 4;
 		/* only take the phy0 addr */
 		addr = (u64)d[12] << 56 |
@@ -326,6 +420,7 @@ static void ses_process_descriptor(struct enclosure_component *ecomp,
 		/* FIXME: Need to add more protocols than just SAS */
 		break;
 	}
+	ecomp->slot = slot;
 	scomp->addr = addr;
 }
 
@@ -349,7 +444,8 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
 		if (scomp->addr != efd->addr)
 			continue;
 
-		enclosure_add_device(edev, i, efd->dev);
+		if (enclosure_add_device(edev, i, efd->dev) == 0)
+			kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE);
 		return 1;
 	}
 	return 0;
@@ -423,16 +519,24 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 			    type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) {
 
 				if (create)
-					ecomp =	enclosure_component_register(edev,
-									     components++,
-									     type_ptr[0],
-									     name);
+					ecomp =	enclosure_component_alloc(
+						edev,
+						components++,
+						type_ptr[0],
+						name);
 				else
 					ecomp = &edev->component[components++];
 
-				if (!IS_ERR(ecomp) && addl_desc_ptr)
-					ses_process_descriptor(ecomp,
-							       addl_desc_ptr);
+				if (!IS_ERR(ecomp)) {
+					ses_get_power_status(edev, ecomp);
+					if (addl_desc_ptr)
+						ses_process_descriptor(
+							ecomp,
+							addl_desc_ptr);
+					if (create)
+						enclosure_component_register(
+							ecomp);
+				}
 			}
 			if (desc_ptr)
 				desc_ptr += len;

drivers/scsi/sg.c

@@ -763,7 +763,7 @@ static int
 sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		unsigned char *cmnd, int timeout, int blocking)
 {
-	int k, data_dir, at_head;
+	int k, at_head;
 	Sg_device *sdp = sfp->parentdp;
 	sg_io_hdr_t *hp = &srp->header;
 
@@ -793,21 +793,6 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		return -ENODEV;
 	}
 
-	switch (hp->dxfer_direction) {
-	case SG_DXFER_TO_FROM_DEV:
-	case SG_DXFER_FROM_DEV:
-		data_dir = DMA_FROM_DEVICE;
-		break;
-	case SG_DXFER_TO_DEV:
-		data_dir = DMA_TO_DEVICE;
-		break;
-	case SG_DXFER_UNKNOWN:
-		data_dir = DMA_BIDIRECTIONAL;
-		break;
-	default:
-		data_dir = DMA_NONE;
-		break;
-	}
 	hp->duration = jiffies_to_msecs(jiffies);
 	if (hp->interface_id != '\0' &&	/* v3 (or later) interface */
 	    (SG_FLAG_Q_AT_TAIL & hp->flags))

drivers/scsi/sr_ioctl.c

@@ -245,9 +245,6 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 				sr_printk(KERN_INFO, cd,
 					  "CDROM not ready.  Make sure there "
 					  "is a disc in the drive.\n");
-#ifdef DEBUG
-			scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
-#endif
 			err = -ENOMEDIUM;
 			break;
 		case ILLEGAL_REQUEST:
@@ -256,16 +253,8 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 			    sshdr.ascq == 0x00)
 				/* sense: Invalid command operation code */
 				err = -EDRIVE_CANT_DO_THIS;
-#ifdef DEBUG
-			__scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE);
-			scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
-#endif
 			break;
 		default:
-			sr_printk(KERN_ERR, cd,
-				  "CDROM (ioctl) error, command: ");
-			__scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE);
-			scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
 			err = -EIO;
 		}
 	}

drivers/scsi/storvsc_drv.c

@@ -32,7 +32,6 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/hyperv.h>
-#include <linux/mempool.h>
 #include <linux/blkdev.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -309,14 +308,6 @@ enum storvsc_request_type {
  * This is the end of Protocol specific defines.
  */
 
-
-/*
- * We setup a mempool to allocate request structures for this driver
- * on a per-lun basis. The following define specifies the number of
- * elements in the pool.
- */
-
-#define STORVSC_MIN_BUF_NR				64
 static int storvsc_ringbuffer_size = (20 * PAGE_SIZE);
 
 module_param(storvsc_ringbuffer_size, int, S_IRUGO);
@@ -346,7 +337,6 @@ static void storvsc_on_channel_callback(void *context);
 #define STORVSC_IDE_MAX_CHANNELS			1
 
 struct storvsc_cmd_request {
-	struct list_head entry;
 	struct scsi_cmnd *cmd;
 
 	unsigned int bounce_sgl_count;
@@ -357,7 +347,6 @@ struct storvsc_cmd_request {
 	/* Synchronize the request/response if needed */
 	struct completion wait_event;
 
-	unsigned char *sense_buffer;
 	struct hv_multipage_buffer data_buffer;
 	struct vstor_packet vstor_packet;
 };
@@ -389,11 +378,6 @@ struct storvsc_device {
 	struct storvsc_cmd_request reset_request;
 };
 
-struct stor_mem_pools {
-	struct kmem_cache *request_pool;
-	mempool_t *request_mempool;
-};
-
 struct hv_host_device {
 	struct hv_device *dev;
 	unsigned int port;
@@ -426,21 +410,42 @@ static void storvsc_device_scan(struct work_struct *work)
 	kfree(wrk);
 }
 
-static void storvsc_bus_scan(struct work_struct *work)
+static void storvsc_host_scan(struct work_struct *work)
 {
 	struct storvsc_scan_work *wrk;
-	int id, order_id;
+	struct Scsi_Host *host;
+	struct scsi_device *sdev;
+	unsigned long flags;
 
 	wrk = container_of(work, struct storvsc_scan_work, work);
-	for (id = 0; id < wrk->host->max_id; ++id) {
-		if (wrk->host->reverse_ordering)
-			order_id = wrk->host->max_id - id - 1;
-		else
-			order_id = id;
-
-		scsi_scan_target(&wrk->host->shost_gendev, 0,
-				order_id, SCAN_WILD_CARD, 1);
+	host = wrk->host;
+
+	/*
+	 * Before scanning the host, first check to see if any of the
+	 * currrently known devices have been hot removed. We issue a
+	 * "unit ready" command against all currently known devices.
+	 * This I/O will result in an error for devices that have been
+	 * removed. As part of handling the I/O error, we remove the device.
+	 *
+	 * When a LUN is added or removed, the host sends us a signal to
+	 * scan the host. Thus we are forced to discover the LUNs that
+	 * may have been removed this way.
+	 */
+	mutex_lock(&host->scan_mutex);
+	spin_lock_irqsave(host->host_lock, flags);
+	list_for_each_entry(sdev, &host->__devices, siblings) {
+		spin_unlock_irqrestore(host->host_lock, flags);
+		scsi_test_unit_ready(sdev, 1, 1, NULL);
+		spin_lock_irqsave(host->host_lock, flags);
+		continue;
 	}
+	spin_unlock_irqrestore(host->host_lock, flags);
+	mutex_unlock(&host->scan_mutex);
+	/*
+	 * Now scan the host to discover LUNs that may have been added.
+	 */
+	scsi_scan_host(host);
+
 	kfree(wrk);
 }
 
@@ -1070,10 +1075,8 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 {
 	struct scsi_cmnd *scmnd = cmd_request->cmd;
 	struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
-	void (*scsi_done_fn)(struct scsi_cmnd *);
 	struct scsi_sense_hdr sense_hdr;
 	struct vmscsi_request *vm_srb;
-	struct stor_mem_pools *memp = scmnd->device->hostdata;
 	struct Scsi_Host *host;
 	struct storvsc_device *stor_dev;
 	struct hv_device *dev = host_dev->dev;
@@ -1109,14 +1112,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 		cmd_request->data_buffer.len -
 		vm_srb->data_transfer_length);
 
-	scsi_done_fn = scmnd->scsi_done;
-
-	scmnd->host_scribble = NULL;
-	scmnd->scsi_done = NULL;
-
-	scsi_done_fn(scmnd);
-
-	mempool_free(cmd_request, memp->request_mempool);
+	scmnd->scsi_done(scmnd);
 }
 
 static void storvsc_on_io_completion(struct hv_device *device,
@@ -1160,7 +1156,7 @@ static void storvsc_on_io_completion(struct hv_device *device,
 			SRB_STATUS_AUTOSENSE_VALID) {
 			/* autosense data available */
 
-			memcpy(request->sense_buffer,
+			memcpy(request->cmd->sense_buffer,
 			       vstor_packet->vm_srb.sense_data,
 			       vstor_packet->vm_srb.sense_info_length);
 
@@ -1198,7 +1194,7 @@ static void storvsc_on_receive(struct hv_device *device,
 		if (!work)
 			return;
 
-		INIT_WORK(&work->work, storvsc_bus_scan);
+		INIT_WORK(&work->work, storvsc_host_scan);
 		work->host = stor_device->host;
 		schedule_work(&work->work);
 		break;
@@ -1378,55 +1374,6 @@ static int storvsc_do_io(struct hv_device *device,
 	return ret;
 }
 
-static int storvsc_device_alloc(struct scsi_device *sdevice)
-{
-	struct stor_mem_pools *memp;
-	int number = STORVSC_MIN_BUF_NR;
-
-	memp = kzalloc(sizeof(struct stor_mem_pools), GFP_KERNEL);
-	if (!memp)
-		return -ENOMEM;
-
-	memp->request_pool =
-		kmem_cache_create(dev_name(&sdevice->sdev_dev),
-				sizeof(struct storvsc_cmd_request), 0,
-				SLAB_HWCACHE_ALIGN, NULL);
-
-	if (!memp->request_pool)
-		goto err0;
-
-	memp->request_mempool = mempool_create(number, mempool_alloc_slab,
-						mempool_free_slab,
-						memp->request_pool);
-
-	if (!memp->request_mempool)
-		goto err1;
-
-	sdevice->hostdata = memp;
-
-	return 0;
-
-err1:
-	kmem_cache_destroy(memp->request_pool);
-
-err0:
-	kfree(memp);
-	return -ENOMEM;
-}
-
-static void storvsc_device_destroy(struct scsi_device *sdevice)
-{
-	struct stor_mem_pools *memp = sdevice->hostdata;
-
-	if (!memp)
-		return;
-
-	mempool_destroy(memp->request_mempool);
-	kmem_cache_destroy(memp->request_pool);
-	kfree(memp);
-	sdevice->hostdata = NULL;
-}
-
 static int storvsc_device_configure(struct scsi_device *sdevice)
 {
 	scsi_change_queue_depth(sdevice, STORVSC_MAX_IO_REQUESTS);
@@ -1447,6 +1394,19 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
 	 */
 	sdevice->sdev_bflags |= msft_blist_flags;
 
+	/*
+	 * If the host is WIN8 or WIN8 R2, claim conformance to SPC-3
+	 * if the device is a MSFT virtual device.
+	 */
+	if (!strncmp(sdevice->vendor, "Msft", 4)) {
+		switch (vmbus_proto_version) {
+		case VERSION_WIN8:
+		case VERSION_WIN8_1:
+			sdevice->scsi_level = SCSI_SPC_3;
+			break;
+		}
+	}
+
 	return 0;
 }
 
@@ -1561,13 +1521,11 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 	int ret;
 	struct hv_host_device *host_dev = shost_priv(host);
 	struct hv_device *dev = host_dev->dev;
-	struct storvsc_cmd_request *cmd_request;
-	unsigned int request_size = 0;
+	struct storvsc_cmd_request *cmd_request = scsi_cmd_priv(scmnd);
 	int i;
 	struct scatterlist *sgl;
 	unsigned int sg_count = 0;
 	struct vmscsi_request *vm_srb;
-	struct stor_mem_pools *memp = scmnd->device->hostdata;
 
 	if (vmstor_current_major <= VMSTOR_WIN8_MAJOR) {
 		/*
@@ -1584,25 +1542,9 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 		}
 	}
 
-	request_size = sizeof(struct storvsc_cmd_request);
-
-	cmd_request = mempool_alloc(memp->request_mempool,
-				       GFP_ATOMIC);
-
-	/*
-	 * We might be invoked in an interrupt context; hence
-	 * mempool_alloc() can fail.
-	 */
-	if (!cmd_request)
-		return SCSI_MLQUEUE_DEVICE_BUSY;
-
-	memset(cmd_request, 0, sizeof(struct storvsc_cmd_request));
-
 	/* Setup the cmd request */
 	cmd_request->cmd = scmnd;
 
-	scmnd->host_scribble = (unsigned char *)cmd_request;
-
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
 	vm_srb->win8_extension.time_out_value = 60;
 
@@ -1637,9 +1579,6 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 
 	memcpy(vm_srb->cdb, scmnd->cmnd, vm_srb->cdb_length);
 
-	cmd_request->sense_buffer = scmnd->sense_buffer;
-
-
 	cmd_request->data_buffer.len = scsi_bufflen(scmnd);
 	if (scsi_sg_count(scmnd)) {
 		sgl = (struct scatterlist *)scsi_sglist(scmnd);
@@ -1651,10 +1590,8 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 				create_bounce_buffer(sgl, scsi_sg_count(scmnd),
 						     scsi_bufflen(scmnd),
 						     vm_srb->data_in);
-			if (!cmd_request->bounce_sgl) {
-				ret = SCSI_MLQUEUE_HOST_BUSY;
-				goto queue_error;
-			}
+			if (!cmd_request->bounce_sgl)
+				return SCSI_MLQUEUE_HOST_BUSY;
 
 			cmd_request->bounce_sgl_count =
 				ALIGN(scsi_bufflen(scmnd), PAGE_SIZE) >>
@@ -1692,27 +1629,21 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
 			destroy_bounce_buffer(cmd_request->bounce_sgl,
 					cmd_request->bounce_sgl_count);
 
-		ret = SCSI_MLQUEUE_DEVICE_BUSY;
-		goto queue_error;
+		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
 	return 0;
-
-queue_error:
-	mempool_free(cmd_request, memp->request_mempool);
-	scmnd->host_scribble = NULL;
-	return ret;
 }
 
 static struct scsi_host_template scsi_driver = {
 	.module	=		THIS_MODULE,
 	.name =			"storvsc_host_t",
+	.cmd_size =             sizeof(struct storvsc_cmd_request),
 	.bios_param =		storvsc_get_chs,
 	.queuecommand =		storvsc_queuecommand,
 	.eh_host_reset_handler =	storvsc_host_reset_handler,
+	.proc_name =		"storvsc_host",
 	.eh_timed_out =		storvsc_eh_timed_out,
-	.slave_alloc =		storvsc_device_alloc,
-	.slave_destroy =	storvsc_device_destroy,
 	.slave_configure =	storvsc_device_configure,
 	.cmd_per_lun =		255,
 	.can_queue =		STORVSC_MAX_IO_REQUESTS*STORVSC_MAX_TARGETS,
@@ -1760,6 +1691,9 @@ static int storvsc_probe(struct hv_device *device,
 	bool dev_is_ide = ((dev_id->driver_data == IDE_GUID) ? true : false);
 	int target = 0;
 	struct storvsc_device *stor_device;
+	int max_luns_per_target;
+	int max_targets;
+	int max_channels;
 
 	/*
 	 * Based on the windows host we are running on,
@@ -1773,12 +1707,18 @@ static int storvsc_probe(struct hv_device *device,
 		vmscsi_size_delta = sizeof(struct vmscsi_win8_extension);
 		vmstor_current_major = VMSTOR_WIN7_MAJOR;
 		vmstor_current_minor = VMSTOR_WIN7_MINOR;
+		max_luns_per_target = STORVSC_IDE_MAX_LUNS_PER_TARGET;
+		max_targets = STORVSC_IDE_MAX_TARGETS;
+		max_channels = STORVSC_IDE_MAX_CHANNELS;
 		break;
 	default:
 		sense_buffer_size = POST_WIN7_STORVSC_SENSE_BUFFER_SIZE;
 		vmscsi_size_delta = 0;
 		vmstor_current_major = VMSTOR_WIN8_MAJOR;
 		vmstor_current_minor = VMSTOR_WIN8_MINOR;
+		max_luns_per_target = STORVSC_MAX_LUNS_PER_TARGET;
+		max_targets = STORVSC_MAX_TARGETS;
+		max_channels = STORVSC_MAX_CHANNELS;
 		break;
 	}
 
@@ -1826,9 +1766,9 @@ static int storvsc_probe(struct hv_device *device,
 		break;
 
 	case SCSI_GUID:
-		host->max_lun = STORVSC_MAX_LUNS_PER_TARGET;
-		host->max_id = STORVSC_MAX_TARGETS;
-		host->max_channel = STORVSC_MAX_CHANNELS - 1;
+		host->max_lun = max_luns_per_target;
+		host->max_id = max_targets;
+		host->max_channel = max_channels - 1;
 		break;
 
 	default:

drivers/scsi/ufs/Kconfig

@@ -70,3 +70,16 @@ config SCSI_UFSHCD_PLATFORM
 	If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
+
+config SCSI_UFS_QCOM
+	bool "QCOM specific hooks to UFS controller platform driver"
+	depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM
+	select PHY_QCOM_UFS
+	help
+	  This selects the QCOM specific additions to UFSHCD platform driver.
+	  UFS host on QCOM needs some vendor specific configuration before
+	  accessing the hardware which includes PHY configuration and vendor
+	  specific registers.
+
+	  Select this if you have UFS controller on QCOM chipset.
+	  If unsure, say N.

drivers/scsi/ufs/Makefile

@@ -1,4 +1,5 @@
 # UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o

drivers/scsi/ufs/ufs-qcom.c

@@ -0,0 +1,1004 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+#include <linux/phy/phy-qcom-ufs.h>
+#include "ufshcd.h"
+#include "unipro.h"
+#include "ufs-qcom.h"
+#include "ufshci.h"
+
+static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result);
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+		const char *speed_mode);
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
+
+static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
+{
+	int err = 0;
+
+	err = ufshcd_dme_get(hba,
+			UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes);
+	if (err)
+		dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n",
+				__func__, err);
+
+	return err;
+}
+
+static int ufs_qcom_host_clk_get(struct device *dev,
+		const char *name, struct clk **clk_out)
+{
+	struct clk *clk;
+	int err = 0;
+
+	clk = devm_clk_get(dev, name);
+	if (IS_ERR(clk)) {
+		err = PTR_ERR(clk);
+		dev_err(dev, "%s: failed to get %s err %d",
+				__func__, name, err);
+	} else {
+		*clk_out = clk;
+	}
+
+	return err;
+}
+
+static int ufs_qcom_host_clk_enable(struct device *dev,
+		const char *name, struct clk *clk)
+{
+	int err = 0;
+
+	err = clk_prepare_enable(clk);
+	if (err)
+		dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err);
+
+	return err;
+}
+
+static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
+{
+	if (!host->is_lane_clks_enabled)
+		return;
+
+	clk_disable_unprepare(host->tx_l1_sync_clk);
+	clk_disable_unprepare(host->tx_l0_sync_clk);
+	clk_disable_unprepare(host->rx_l1_sync_clk);
+	clk_disable_unprepare(host->rx_l0_sync_clk);
+
+	host->is_lane_clks_enabled = false;
+}
+
+static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
+{
+	int err = 0;
+	struct device *dev = host->hba->dev;
+
+	if (host->is_lane_clks_enabled)
+		return 0;
+
+	err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk",
+		host->rx_l0_sync_clk);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk",
+		host->tx_l0_sync_clk);
+	if (err)
+		goto disable_rx_l0;
+
+	err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
+		host->rx_l1_sync_clk);
+	if (err)
+		goto disable_tx_l0;
+
+	err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
+		host->tx_l1_sync_clk);
+	if (err)
+		goto disable_rx_l1;
+
+	host->is_lane_clks_enabled = true;
+	goto out;
+
+disable_rx_l1:
+	clk_disable_unprepare(host->rx_l1_sync_clk);
+disable_tx_l0:
+	clk_disable_unprepare(host->tx_l0_sync_clk);
+disable_rx_l0:
+	clk_disable_unprepare(host->rx_l0_sync_clk);
+out:
+	return err;
+}
+
+static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
+{
+	int err = 0;
+	struct device *dev = host->hba->dev;
+
+	err = ufs_qcom_host_clk_get(dev,
+			"rx_lane0_sync_clk", &host->rx_l0_sync_clk);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_host_clk_get(dev,
+			"tx_lane0_sync_clk", &host->tx_l0_sync_clk);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
+		&host->rx_l1_sync_clk);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
+		&host->tx_l1_sync_clk);
+out:
+	return err;
+}
+
+static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	struct phy *phy = host->generic_phy;
+	u32 tx_lanes;
+	int err = 0;
+
+	err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
+	if (err)
+		goto out;
+
+	err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
+	if (err)
+		dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
+			__func__);
+
+out:
+	return err;
+}
+
+static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
+{
+	int err;
+	u32 tx_fsm_val = 0;
+	unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+	do {
+		err = ufshcd_dme_get(hba,
+			UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+		if (err || tx_fsm_val == TX_FSM_HIBERN8)
+			break;
+
+		/* sleep for max. 200us */
+		usleep_range(100, 200);
+	} while (time_before(jiffies, timeout));
+
+	/*
+	 * we might have scheduled out for long during polling so
+	 * check the state again.
+	 */
+	if (time_after(jiffies, timeout))
+		err = ufshcd_dme_get(hba,
+				UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+
+	if (err) {
+		dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+				__func__, err);
+	} else if (tx_fsm_val != TX_FSM_HIBERN8) {
+		err = tx_fsm_val;
+		dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
+				__func__, err);
+	}
+
+	return err;
+}
+
+static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	struct phy *phy = host->generic_phy;
+	int ret = 0;
+	u8 major;
+	u16 minor, step;
+	bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
+							? true : false;
+
+	/* Assert PHY reset and apply PHY calibration values */
+	ufs_qcom_assert_reset(hba);
+	/* provide 1ms delay to let the reset pulse propagate */
+	usleep_range(1000, 1100);
+
+	ufs_qcom_get_controller_revision(hba, &major, &minor, &step);
+	ufs_qcom_phy_save_controller_version(phy, major, minor, step);
+	ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
+	if (ret) {
+		dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	/* De-assert PHY reset and start serdes */
+	ufs_qcom_deassert_reset(hba);
+
+	/*
+	 * after reset deassertion, phy will need all ref clocks,
+	 * voltage, current to settle down before starting serdes.
+	 */
+	usleep_range(1000, 1100);
+	ret = ufs_qcom_phy_start_serdes(phy);
+	if (ret) {
+		dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	ret = ufs_qcom_phy_is_pcs_ready(phy);
+	if (ret)
+		dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
+			__func__, ret);
+
+out:
+	return ret;
+}
+
+/*
+ * The UTP controller has a number of internal clock gating cells (CGCs).
+ * Internal hardware sub-modules within the UTP controller control the CGCs.
+ * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved
+ * in a specific operation, UTP controller CGCs are by default disabled and
+ * this function enables them (after every UFS link startup) to save some power
+ * leakage.
+ */
+static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
+{
+	ufshcd_writel(hba,
+		ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL,
+		REG_UFS_CFG2);
+
+	/* Ensure that HW clock gating is enabled before next operations */
+	mb();
+}
+
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	int err = 0;
+
+	switch (status) {
+	case PRE_CHANGE:
+		ufs_qcom_power_up_sequence(hba);
+		/*
+		 * The PHY PLL output is the source of tx/rx lane symbol
+		 * clocks, hence, enable the lane clocks only after PHY
+		 * is initialized.
+		 */
+		err = ufs_qcom_enable_lane_clks(host);
+		break;
+	case POST_CHANGE:
+		/* check if UFS PHY moved from DISABLED to HIBERN8 */
+		err = ufs_qcom_check_hibern8(hba);
+		ufs_qcom_enable_hw_clk_gating(hba);
+
+		break;
+	default:
+		dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
+		err = -EINVAL;
+		break;
+	}
+	return err;
+}
+
+/**
+ * Returns non-zero for success (which rate of core_clk) and 0
+ * in case of a failure
+ */
+static unsigned long
+ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
+{
+	struct ufs_clk_info *clki;
+	u32 core_clk_period_in_ns;
+	u32 tx_clk_cycles_per_us = 0;
+	unsigned long core_clk_rate = 0;
+	u32 core_clk_cycles_per_us = 0;
+
+	static u32 pwm_fr_table[][2] = {
+		{UFS_PWM_G1, 0x1},
+		{UFS_PWM_G2, 0x1},
+		{UFS_PWM_G3, 0x1},
+		{UFS_PWM_G4, 0x1},
+	};
+
+	static u32 hs_fr_table_rA[][2] = {
+		{UFS_HS_G1, 0x1F},
+		{UFS_HS_G2, 0x3e},
+	};
+
+	static u32 hs_fr_table_rB[][2] = {
+		{UFS_HS_G1, 0x24},
+		{UFS_HS_G2, 0x49},
+	};
+
+	if (gear == 0) {
+		dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
+		goto out_error;
+	}
+
+	list_for_each_entry(clki, &hba->clk_list_head, list) {
+		if (!strcmp(clki->name, "core_clk"))
+			core_clk_rate = clk_get_rate(clki->clk);
+	}
+
+	/* If frequency is smaller than 1MHz, set to 1MHz */
+	if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
+		core_clk_rate = DEFAULT_CLK_RATE_HZ;
+
+	core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
+	ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+
+	core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
+	core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
+	core_clk_period_in_ns &= MASK_CLK_NS_REG;
+
+	switch (hs) {
+	case FASTAUTO_MODE:
+	case FAST_MODE:
+		if (rate == PA_HS_MODE_A) {
+			if (gear > ARRAY_SIZE(hs_fr_table_rA)) {
+				dev_err(hba->dev,
+					"%s: index %d exceeds table size %zu\n",
+					__func__, gear,
+					ARRAY_SIZE(hs_fr_table_rA));
+				goto out_error;
+			}
+			tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1];
+		} else if (rate == PA_HS_MODE_B) {
+			if (gear > ARRAY_SIZE(hs_fr_table_rB)) {
+				dev_err(hba->dev,
+					"%s: index %d exceeds table size %zu\n",
+					__func__, gear,
+					ARRAY_SIZE(hs_fr_table_rB));
+				goto out_error;
+			}
+			tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1];
+		} else {
+			dev_err(hba->dev, "%s: invalid rate = %d\n",
+				__func__, rate);
+			goto out_error;
+		}
+		break;
+	case SLOWAUTO_MODE:
+	case SLOW_MODE:
+		if (gear > ARRAY_SIZE(pwm_fr_table)) {
+			dev_err(hba->dev,
+					"%s: index %d exceeds table size %zu\n",
+					__func__, gear,
+					ARRAY_SIZE(pwm_fr_table));
+			goto out_error;
+		}
+		tx_clk_cycles_per_us = pwm_fr_table[gear-1][1];
+		break;
+	case UNCHANGED:
+	default:
+		dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs);
+		goto out_error;
+	}
+
+	/* this register 2 fields shall be written at once */
+	ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+						REG_UFS_TX_SYMBOL_CLK_NS_US);
+	goto out;
+
+out_error:
+	core_clk_rate = 0;
+out:
+	return core_clk_rate;
+}
+
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
+{
+	unsigned long core_clk_rate = 0;
+	u32 core_clk_cycles_per_100ms;
+
+	switch (status) {
+	case PRE_CHANGE:
+		core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1,
+						    SLOWAUTO_MODE, 0);
+		if (!core_clk_rate) {
+			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+				__func__);
+			return -EINVAL;
+		}
+		core_clk_cycles_per_100ms =
+			(core_clk_rate / MSEC_PER_SEC) * 100;
+		ufshcd_writel(hba, core_clk_cycles_per_100ms,
+					REG_UFS_PA_LINK_STARTUP_TIMER);
+		break;
+	case POST_CHANGE:
+		ufs_qcom_link_startup_post_change(hba);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	struct phy *phy = host->generic_phy;
+	int ret = 0;
+
+	if (ufs_qcom_is_link_off(hba)) {
+		/*
+		 * Disable the tx/rx lane symbol clocks before PHY is
+		 * powered down as the PLL source should be disabled
+		 * after downstream clocks are disabled.
+		 */
+		ufs_qcom_disable_lane_clks(host);
+		phy_power_off(phy);
+
+		/* Assert PHY soft reset */
+		ufs_qcom_assert_reset(hba);
+		goto out;
+	}
+
+	/*
+	 * If UniPro link is not active, PHY ref_clk, main PHY analog power
+	 * rail and low noise analog power rail for PLL can be switched off.
+	 */
+	if (!ufs_qcom_is_link_active(hba))
+		phy_power_off(phy);
+
+out:
+	return ret;
+}
+
+static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	struct phy *phy = host->generic_phy;
+	int err;
+
+	err = phy_power_on(phy);
+	if (err) {
+		dev_err(hba->dev, "%s: failed enabling regs, err = %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	hba->is_sys_suspended = false;
+
+out:
+	return err;
+}
+
+struct ufs_qcom_dev_params {
+	u32 pwm_rx_gear;	/* pwm rx gear to work in */
+	u32 pwm_tx_gear;	/* pwm tx gear to work in */
+	u32 hs_rx_gear;		/* hs rx gear to work in */
+	u32 hs_tx_gear;		/* hs tx gear to work in */
+	u32 rx_lanes;		/* number of rx lanes */
+	u32 tx_lanes;		/* number of tx lanes */
+	u32 rx_pwr_pwm;		/* rx pwm working pwr */
+	u32 tx_pwr_pwm;		/* tx pwm working pwr */
+	u32 rx_pwr_hs;		/* rx hs working pwr */
+	u32 tx_pwr_hs;		/* tx hs working pwr */
+	u32 hs_rate;		/* rate A/B to work in HS */
+	u32 desired_working_mode;
+};
+
+static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
+				      struct ufs_pa_layer_attr *dev_max,
+				      struct ufs_pa_layer_attr *agreed_pwr)
+{
+	int min_qcom_gear;
+	int min_dev_gear;
+	bool is_dev_sup_hs = false;
+	bool is_qcom_max_hs = false;
+
+	if (dev_max->pwr_rx == FAST_MODE)
+		is_dev_sup_hs = true;
+
+	if (qcom_param->desired_working_mode == FAST) {
+		is_qcom_max_hs = true;
+		min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear,
+				      qcom_param->hs_tx_gear);
+	} else {
+		min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear,
+				      qcom_param->pwm_tx_gear);
+	}
+
+	/*
+	 * device doesn't support HS but qcom_param->desired_working_mode is
+	 * HS, thus device and qcom_param don't agree
+	 */
+	if (!is_dev_sup_hs && is_qcom_max_hs) {
+		pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n",
+			__func__);
+		return -ENOTSUPP;
+	} else if (is_dev_sup_hs && is_qcom_max_hs) {
+		/*
+		 * since device supports HS, it supports FAST_MODE.
+		 * since qcom_param->desired_working_mode is also HS
+		 * then final decision (FAST/FASTAUTO) is done according
+		 * to qcom_params as it is the restricting factor
+		 */
+		agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+						qcom_param->rx_pwr_hs;
+	} else {
+		/*
+		 * here qcom_param->desired_working_mode is PWM.
+		 * it doesn't matter whether device supports HS or PWM,
+		 * in both cases qcom_param->desired_working_mode will
+		 * determine the mode
+		 */
+		 agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+						qcom_param->rx_pwr_pwm;
+	}
+
+	/*
+	 * we would like tx to work in the minimum number of lanes
+	 * between device capability and vendor preferences.
+	 * the same decision will be made for rx
+	 */
+	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
+						qcom_param->tx_lanes);
+	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
+						qcom_param->rx_lanes);
+
+	/* device maximum gear is the minimum between device rx and tx gears */
+	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+	/*
+	 * if both device capabilities and vendor pre-defined preferences are
+	 * both HS or both PWM then set the minimum gear to be the chosen
+	 * working gear.
+	 * if one is PWM and one is HS then the one that is PWM get to decide
+	 * what is the gear, as it is the one that also decided previously what
+	 * pwr the device will be configured to.
+	 */
+	if ((is_dev_sup_hs && is_qcom_max_hs) ||
+	    (!is_dev_sup_hs && !is_qcom_max_hs))
+		agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+			min_t(u32, min_dev_gear, min_qcom_gear);
+	else if (!is_dev_sup_hs)
+		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear;
+	else
+		agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear;
+
+	agreed_pwr->hs_rate = qcom_param->hs_rate;
+	return 0;
+}
+
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+	int vote;
+	int err = 0;
+	char mode[BUS_VECTOR_NAME_LEN];
+
+	ufs_qcom_get_speed_mode(&host->dev_req_params, mode);
+
+	vote = ufs_qcom_get_bus_vote(host, mode);
+	if (vote >= 0)
+		err = ufs_qcom_set_bus_vote(host, vote);
+	else
+		err = vote;
+
+	if (err)
+		dev_err(host->hba->dev, "%s: failed %d\n", __func__, err);
+	else
+		host->bus_vote.saved_vote = vote;
+	return err;
+}
+
+static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
+				bool status,
+				struct ufs_pa_layer_attr *dev_max_params,
+				struct ufs_pa_layer_attr *dev_req_params)
+{
+	u32 val;
+	struct ufs_qcom_host *host = hba->priv;
+	struct phy *phy = host->generic_phy;
+	struct ufs_qcom_dev_params ufs_qcom_cap;
+	int ret = 0;
+	int res = 0;
+
+	if (!dev_req_params) {
+		pr_err("%s: incoming dev_req_params is NULL\n", __func__);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	switch (status) {
+	case PRE_CHANGE:
+		ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX;
+		ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX;
+		ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX;
+		ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX;
+		ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX;
+		ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX;
+		ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM;
+		ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM;
+		ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS;
+		ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS;
+		ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
+		ufs_qcom_cap.desired_working_mode =
+					UFS_QCOM_LIMIT_DESIRED_MODE;
+
+		ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
+						 dev_max_params,
+						 dev_req_params);
+		if (ret) {
+			pr_err("%s: failed to determine capabilities\n",
+					__func__);
+			goto out;
+		}
+
+		break;
+	case POST_CHANGE:
+		if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+					dev_req_params->pwr_rx,
+					dev_req_params->hs_rate)) {
+			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+				__func__);
+			/*
+			 * we return error code at the end of the routine,
+			 * but continue to configure UFS_PHY_TX_LANE_ENABLE
+			 * and bus voting as usual
+			 */
+			ret = -EINVAL;
+		}
+
+		val = ~(MAX_U32 << dev_req_params->lane_tx);
+		res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
+		if (res) {
+			dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
+				__func__, res);
+			ret = res;
+		}
+
+		/* cache the power mode parameters to use internally */
+		memcpy(&host->dev_req_params,
+				dev_req_params, sizeof(*dev_req_params));
+		ufs_qcom_update_bus_bw_vote(host);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+out:
+	return ret;
+}
+
+/**
+ * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks
+ * @hba: host controller instance
+ *
+ * QCOM UFS host controller might have some non standard behaviours (quirks)
+ * than what is specified by UFSHCI specification. Advertise all such
+ * quirks to standard UFS host controller driver so standard takes them into
+ * account.
+ */
+static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
+{
+	u8 major;
+	u16 minor, step;
+
+	ufs_qcom_get_controller_revision(hba, &major, &minor, &step);
+
+	/*
+	 * TBD
+	 * here we should be advertising controller quirks according to
+	 * controller version.
+	 */
+}
+
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+		const char *speed_mode)
+{
+	struct device *dev = host->hba->dev;
+	struct device_node *np = dev->of_node;
+	int err;
+	const char *key = "qcom,bus-vector-names";
+
+	if (!speed_mode) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
+		err = of_property_match_string(np, key, "MAX");
+	else
+		err = of_property_match_string(np, key, speed_mode);
+
+out:
+	if (err < 0)
+		dev_err(dev, "%s: Invalid %s mode %d\n",
+				__func__, speed_mode, err);
+	return err;
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+	int err = 0;
+
+	if (vote != host->bus_vote.curr_vote)
+		host->bus_vote.curr_vote = vote;
+
+	return err;
+}
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
+{
+	int gear = max_t(u32, p->gear_rx, p->gear_tx);
+	int lanes = max_t(u32, p->lane_rx, p->lane_tx);
+	int pwr;
+
+	/* default to PWM Gear 1, Lane 1 if power mode is not initialized */
+	if (!gear)
+		gear = 1;
+
+	if (!lanes)
+		lanes = 1;
+
+	if (!p->pwr_rx && !p->pwr_tx) {
+		pwr = SLOWAUTO_MODE;
+		snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
+	} else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
+		 p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
+		pwr = FAST_MODE;
+		snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
+			 p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
+	} else {
+		pwr = SLOW_MODE;
+		snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
+			 "PWM", gear, lanes);
+	}
+}
+
+static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	int err = 0;
+	int vote = 0;
+
+	/*
+	 * In case ufs_qcom_init() is not yet done, simply ignore.
+	 * This ufs_qcom_setup_clocks() shall be called from
+	 * ufs_qcom_init() after init is done.
+	 */
+	if (!host)
+		return 0;
+
+	if (on) {
+		err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
+		if (err)
+			goto out;
+
+		err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
+		if (err) {
+			dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n",
+				__func__, err);
+			ufs_qcom_phy_disable_iface_clk(host->generic_phy);
+			goto out;
+		}
+		/* enable the device ref clock */
+		ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy);
+		vote = host->bus_vote.saved_vote;
+		if (vote == host->bus_vote.min_bw_vote)
+			ufs_qcom_update_bus_bw_vote(host);
+	} else {
+		/* M-PHY RMMI interface clocks can be turned off */
+		ufs_qcom_phy_disable_iface_clk(host->generic_phy);
+		if (!ufs_qcom_is_link_active(hba)) {
+			/* turn off UFS local PHY ref_clk */
+			ufs_qcom_phy_disable_ref_clk(host->generic_phy);
+			/* disable device ref_clk */
+			ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy);
+		}
+		vote = host->bus_vote.min_bw_vote;
+	}
+
+	err = ufs_qcom_set_bus_vote(host, vote);
+	if (err)
+		dev_err(hba->dev, "%s: set bus vote failed %d\n",
+				__func__, err);
+
+out:
+	return err;
+}
+
+static ssize_t
+show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	struct ufs_qcom_host *host = hba->priv;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n",
+			host->bus_vote.is_max_bw_needed);
+}
+
+static ssize_t
+store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	struct ufs_qcom_host *host = hba->priv;
+	uint32_t value;
+
+	if (!kstrtou32(buf, 0, &value)) {
+		host->bus_vote.is_max_bw_needed = !!value;
+		ufs_qcom_update_bus_bw_vote(host);
+	}
+
+	return count;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+	int err;
+	struct device *dev = host->hba->dev;
+	struct device_node *np = dev->of_node;
+
+	err = of_property_count_strings(np, "qcom,bus-vector-names");
+	if (err < 0 ) {
+		dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
+				__func__, err);
+		goto out;
+	}
+
+	/* cache the vote index for minimum and maximum bandwidth */
+	host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
+	host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
+
+	host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
+	host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
+	sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
+	host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
+	host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
+	err = device_create_file(dev, &host->bus_vote.max_bus_bw);
+out:
+	return err;
+}
+
+#define	ANDROID_BOOT_DEV_MAX	30
+static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
+static int get_android_boot_dev(char *str)
+{
+	strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX);
+	return 1;
+}
+__setup("androidboot.bootdevice=", get_android_boot_dev);
+
+/**
+ * ufs_qcom_init - bind phy with controller
+ * @hba: host controller instance
+ *
+ * Binds PHY with controller and powers up PHY enabling clocks
+ * and regulators.
+ *
+ * Returns -EPROBE_DEFER if binding fails, returns negative error
+ * on phy power up failure and returns zero on success.
+ */
+static int ufs_qcom_init(struct ufs_hba *hba)
+{
+	int err;
+	struct device *dev = hba->dev;
+	struct ufs_qcom_host *host;
+
+	if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
+		return -ENODEV;
+
+	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+	if (!host) {
+		err = -ENOMEM;
+		dev_err(dev, "%s: no memory for qcom ufs host\n", __func__);
+		goto out;
+	}
+
+	host->hba = hba;
+	hba->priv = (void *)host;
+
+	host->generic_phy = devm_phy_get(dev, "ufsphy");
+
+	if (IS_ERR(host->generic_phy)) {
+		err = PTR_ERR(host->generic_phy);
+		dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
+		goto out;
+	}
+
+	err = ufs_qcom_bus_register(host);
+	if (err)
+		goto out_host_free;
+
+	phy_init(host->generic_phy);
+	err = phy_power_on(host->generic_phy);
+	if (err)
+		goto out_unregister_bus;
+
+	err = ufs_qcom_init_lane_clks(host);
+	if (err)
+		goto out_disable_phy;
+
+	ufs_qcom_advertise_quirks(hba);
+
+	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING;
+	hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+
+	ufs_qcom_setup_clocks(hba, true);
+
+	if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
+		ufs_qcom_hosts[hba->dev->id] = host;
+
+	goto out;
+
+out_disable_phy:
+	phy_power_off(host->generic_phy);
+out_unregister_bus:
+	phy_exit(host->generic_phy);
+out_host_free:
+	devm_kfree(dev, host);
+	hba->priv = NULL;
+out:
+	return err;
+}
+
+static void ufs_qcom_exit(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = hba->priv;
+
+	ufs_qcom_disable_lane_clks(host);
+	phy_power_off(host->generic_phy);
+}
+
+static
+void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
+{
+	struct ufs_qcom_host *host = hba->priv;
+	struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+
+	if (!dev_req_params)
+		return;
+
+	ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+				dev_req_params->pwr_rx,
+				dev_req_params->hs_rate);
+}
+
+/**
+ * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
+ *
+ * The variant operations configure the necessary controller and PHY
+ * handshake during initialization.
+ */
+static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+	.name                   = "qcom",
+	.init                   = ufs_qcom_init,
+	.exit                   = ufs_qcom_exit,
+	.clk_scale_notify	= ufs_qcom_clk_scale_notify,
+	.setup_clocks           = ufs_qcom_setup_clocks,
+	.hce_enable_notify      = ufs_qcom_hce_enable_notify,
+	.link_startup_notify    = ufs_qcom_link_startup_notify,
+	.pwr_change_notify	= ufs_qcom_pwr_change_notify,
+	.suspend		= ufs_qcom_suspend,
+	.resume			= ufs_qcom_resume,
+};
+EXPORT_SYMBOL(ufs_hba_qcom_vops);

drivers/scsi/ufs/ufs-qcom.h

@@ -0,0 +1,170 @@
+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_H_
+#define UFS_QCOM_H_
+
+#define MAX_UFS_QCOM_HOSTS	1
+#define MAX_U32                 (~(u32)0)
+#define MPHY_TX_FSM_STATE       0x41
+#define TX_FSM_HIBERN8          0x1
+#define HBRN8_POLL_TOUT_MS      100
+#define DEFAULT_CLK_RATE_HZ     1000000
+#define BUS_VECTOR_NAME_LEN     32
+
+#define UFS_HW_VER_MAJOR_SHFT	(28)
+#define UFS_HW_VER_MAJOR_MASK	(0x000F << UFS_HW_VER_MAJOR_SHFT)
+#define UFS_HW_VER_MINOR_SHFT	(16)
+#define UFS_HW_VER_MINOR_MASK	(0x0FFF << UFS_HW_VER_MINOR_SHFT)
+#define UFS_HW_VER_STEP_SHFT	(0)
+#define UFS_HW_VER_STEP_MASK	(0xFFFF << UFS_HW_VER_STEP_SHFT)
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_QCOM_LIMIT_NUM_LANES_RX	2
+#define UFS_QCOM_LIMIT_NUM_LANES_TX	2
+#define UFS_QCOM_LIMIT_HSGEAR_RX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_TX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_PWMGEAR_RX	UFS_PWM_G4
+#define UFS_QCOM_LIMIT_PWMGEAR_TX	UFS_PWM_G4
+#define UFS_QCOM_LIMIT_RX_PWR_PWM	SLOW_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_PWM	SLOW_MODE
+#define UFS_QCOM_LIMIT_RX_PWR_HS	FAST_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_HS	FAST_MODE
+#define UFS_QCOM_LIMIT_HS_RATE		PA_HS_MODE_B
+#define UFS_QCOM_LIMIT_DESIRED_MODE	FAST
+
+/* QCOM UFS host controller vendor specific registers */
+enum {
+	REG_UFS_SYS1CLK_1US                 = 0xC0,
+	REG_UFS_TX_SYMBOL_CLK_NS_US         = 0xC4,
+	REG_UFS_LOCAL_PORT_ID_REG           = 0xC8,
+	REG_UFS_PA_ERR_CODE                 = 0xCC,
+	REG_UFS_RETRY_TIMER_REG             = 0xD0,
+	REG_UFS_PA_LINK_STARTUP_TIMER       = 0xD8,
+	REG_UFS_CFG1                        = 0xDC,
+	REG_UFS_CFG2                        = 0xE0,
+	REG_UFS_HW_VERSION                  = 0xE4,
+
+	UFS_DBG_RD_REG_UAWM			= 0x100,
+	UFS_DBG_RD_REG_UARM			= 0x200,
+	UFS_DBG_RD_REG_TXUC			= 0x300,
+	UFS_DBG_RD_REG_RXUC			= 0x400,
+	UFS_DBG_RD_REG_DFC			= 0x500,
+	UFS_DBG_RD_REG_TRLUT			= 0x600,
+	UFS_DBG_RD_REG_TMRLUT			= 0x700,
+	UFS_UFS_DBG_RD_REG_OCSC			= 0x800,
+
+	UFS_UFS_DBG_RD_DESC_RAM			= 0x1500,
+	UFS_UFS_DBG_RD_PRDT_RAM			= 0x1700,
+	UFS_UFS_DBG_RD_RESP_RAM			= 0x1800,
+	UFS_UFS_DBG_RD_EDTL_RAM			= 0x1900,
+};
+
+/* bit definitions for REG_UFS_CFG2 register */
+#define UAWM_HW_CGC_EN		(1 << 0)
+#define UARM_HW_CGC_EN		(1 << 1)
+#define TXUC_HW_CGC_EN		(1 << 2)
+#define RXUC_HW_CGC_EN		(1 << 3)
+#define DFC_HW_CGC_EN		(1 << 4)
+#define TRLUT_HW_CGC_EN		(1 << 5)
+#define TMRLUT_HW_CGC_EN	(1 << 6)
+#define OCSC_HW_CGC_EN		(1 << 7)
+
+#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
+				 TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
+				 DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
+				 TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN)
+
+/* bit offset */
+enum {
+	OFFSET_UFS_PHY_SOFT_RESET           = 1,
+	OFFSET_CLK_NS_REG                   = 10,
+};
+
+/* bit masks */
+enum {
+	MASK_UFS_PHY_SOFT_RESET             = 0x2,
+	MASK_TX_SYMBOL_CLK_1US_REG          = 0x3FF,
+	MASK_CLK_NS_REG                     = 0xFFFC00,
+};
+
+enum ufs_qcom_phy_init_type {
+	UFS_PHY_INIT_FULL,
+	UFS_PHY_INIT_CFG_RESTORE,
+};
+
+static inline void
+ufs_qcom_get_controller_revision(struct ufs_hba *hba,
+				 u8 *major, u16 *minor, u16 *step)
+{
+	u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
+
+	*major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
+	*minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
+	*step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
+};
+
+static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
+{
+	ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+			1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+
+	/*
+	 * Make sure assertion of ufs phy reset is written to
+	 * register before returning
+	 */
+	mb();
+}
+
+static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
+{
+	ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+			0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+
+	/*
+	 * Make sure de-assertion of ufs phy reset is written to
+	 * register before returning
+	 */
+	mb();
+}
+
+struct ufs_qcom_bus_vote {
+	uint32_t client_handle;
+	uint32_t curr_vote;
+	int min_bw_vote;
+	int max_bw_vote;
+	int saved_vote;
+	bool is_max_bw_needed;
+	struct device_attribute max_bus_bw;
+};
+
+struct ufs_qcom_host {
+	struct phy *generic_phy;
+	struct ufs_hba *hba;
+	struct ufs_qcom_bus_vote bus_vote;
+	struct ufs_pa_layer_attr dev_req_params;
+	struct clk *rx_l0_sync_clk;
+	struct clk *tx_l0_sync_clk;
+	struct clk *rx_l1_sync_clk;
+	struct clk *tx_l1_sync_clk;
+	bool is_lane_clks_enabled;
+};
+
+#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
+#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
+#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+
+#endif /* UFS_QCOM_H_ */

drivers/scsi/ufs/ufshcd.c

@@ -4714,10 +4714,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 		sdev_printk(KERN_WARNING, sdp,
 			    "START_STOP failed for power mode: %d, result %x\n",
 			    pwr_mode, ret);
-		if (driver_byte(ret) & DRIVER_SENSE) {
-			scsi_show_sense_hdr(sdp, NULL, &sshdr);
-			scsi_show_extd_sense(sdp, NULL, sshdr.asc, sshdr.ascq);
-		}
+		if (driver_byte(ret) & DRIVER_SENSE)
+			scsi_print_sense_hdr(sdp, NULL, &sshdr);
 	}
 
 	if (!ret)

drivers/scsi/wd33c93.c

@@ -2143,22 +2143,22 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
 		seq_printf(m, "\nclock_freq=%02x no_sync=%02x no_dma=%d"
 			" dma_mode=%02x fast=%d",
 			hd->clock_freq, hd->no_sync, hd->no_dma, hd->dma_mode, hd->fast);
-		seq_printf(m, "\nsync_xfer[] =       ");
+		seq_puts(m, "\nsync_xfer[] =       ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%02x", hd->sync_xfer[x]);
-		seq_printf(m, "\nsync_stat[] =       ");
+		seq_puts(m, "\nsync_stat[] =       ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%02x", hd->sync_stat[x]);
 	}
 #ifdef PROC_STATISTICS
 	if (hd->proc & PR_STATISTICS) {
-		seq_printf(m, "\ncommands issued:    ");
+		seq_puts(m, "\ncommands issued:    ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%ld", hd->cmd_cnt[x]);
-		seq_printf(m, "\ndisconnects allowed:");
+		seq_puts(m, "\ndisconnects allowed:");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%ld", hd->disc_allowed_cnt[x]);
-		seq_printf(m, "\ndisconnects done:   ");
+		seq_puts(m, "\ndisconnects done:   ");
 		for (x = 0; x < 7; x++)
 			seq_printf(m, "\t%ld", hd->disc_done_cnt[x]);
 		seq_printf(m,
@@ -2167,7 +2167,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
 	}
 #endif
 	if (hd->proc & PR_CONNECTED) {
-		seq_printf(m, "\nconnected:     ");
+		seq_puts(m, "\nconnected:     ");
 		if (hd->connected) {
 			cmd = (struct scsi_cmnd *) hd->connected;
 			seq_printf(m, " %d:%llu(%02x)",
@@ -2175,7 +2175,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
 		}
 	}
 	if (hd->proc & PR_INPUTQ) {
-		seq_printf(m, "\ninput_Q:       ");
+		seq_puts(m, "\ninput_Q:       ");
 		cmd = (struct scsi_cmnd *) hd->input_Q;
 		while (cmd) {
 			seq_printf(m, " %d:%llu(%02x)",
@@ -2184,7 +2184,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
 		}
 	}
 	if (hd->proc & PR_DISCQ) {
-		seq_printf(m, "\ndisconnected_Q:");
+		seq_puts(m, "\ndisconnected_Q:");
 		cmd = (struct scsi_cmnd *) hd->disconnected_Q;
 		while (cmd) {
 			seq_printf(m, " %d:%llu(%02x)",
@@ -2192,7 +2192,7 @@ wd33c93_show_info(struct seq_file *m, struct Scsi_Host *instance)
 			cmd = (struct scsi_cmnd *) cmd->host_scribble;
 		}
 	}
-	seq_printf(m, "\n");
+	seq_putc(m, '\n');
 	spin_unlock_irq(&hd->lock);
 #endif				/* PROC_INTERFACE */
 	return 0;

drivers/scsi/wd7000.c

@@ -1295,9 +1295,6 @@ static void wd7000_revision(Adapter * host)
 }
 
 
-#undef SPRINTF
-#define SPRINTF(args...) { seq_printf(m, ## args); }
-
 static int wd7000_set_info(struct Scsi_Host *host, char *buffer, int length)
 {
 	dprintk("Buffer = <%.*s>, length = %d\n", length, buffer, length);
@@ -1320,43 +1317,43 @@ static int wd7000_show_info(struct seq_file *m, struct Scsi_Host *host)
 #endif
 
 	spin_lock_irqsave(host->host_lock, flags);
-	SPRINTF("Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2);
-	SPRINTF("  IO base:      0x%x\n", adapter->iobase);
-	SPRINTF("  IRQ:          %d\n", adapter->irq);
-	SPRINTF("  DMA channel:  %d\n", adapter->dma);
-	SPRINTF("  Interrupts:   %d\n", adapter->int_counter);
-	SPRINTF("  BUS_ON time:  %d nanoseconds\n", adapter->bus_on * 125);
-	SPRINTF("  BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
+	seq_printf(m, "Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2);
+	seq_printf(m, "  IO base:      0x%x\n", adapter->iobase);
+	seq_printf(m, "  IRQ:          %d\n", adapter->irq);
+	seq_printf(m, "  DMA channel:  %d\n", adapter->dma);
+	seq_printf(m, "  Interrupts:   %d\n", adapter->int_counter);
+	seq_printf(m, "  BUS_ON time:  %d nanoseconds\n", adapter->bus_on * 125);
+	seq_printf(m, "  BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125);
 
 #ifdef WD7000_DEBUG
 	ogmbs = adapter->mb.ogmb;
 	icmbs = adapter->mb.icmb;
 
-	SPRINTF("\nControl port value: 0x%x\n", adapter->control);
-	SPRINTF("Incoming mailbox:\n");
-	SPRINTF("  size: %d\n", ICMB_CNT);
-	SPRINTF("  queued messages: ");
+	seq_printf(m, "\nControl port value: 0x%x\n", adapter->control);
+	seq_puts(m, "Incoming mailbox:\n");
+	seq_printf(m, "  size: %d\n", ICMB_CNT);
+	seq_puts(m, "  queued messages: ");
 
 	for (i = count = 0; i < ICMB_CNT; i++)
 		if (icmbs[i].status) {
 			count++;
-			SPRINTF("0x%x ", i);
+			seq_printf(m, "0x%x ", i);
 		}
 
-	SPRINTF(count ? "\n" : "none\n");
+	seq_puts(m, count ? "\n" : "none\n");
 
-	SPRINTF("Outgoing mailbox:\n");
-	SPRINTF("  size: %d\n", OGMB_CNT);
-	SPRINTF("  next message: 0x%x\n", adapter->next_ogmb);
-	SPRINTF("  queued messages: ");
+	seq_puts(m, "Outgoing mailbox:\n");
+	seq_printf(m, "  size: %d\n", OGMB_CNT);
+	seq_printf(m, "  next message: 0x%x\n", adapter->next_ogmb);
+	seq_puts(m, "  queued messages: ");
 
 	for (i = count = 0; i < OGMB_CNT; i++)
 		if (ogmbs[i].status) {
 			count++;
-			SPRINTF("0x%x ", i);
+			seq_printf(m, "0x%x ", i);
 		}
 
-	SPRINTF(count ? "\n" : "none\n");
+	seq_puts(m, count ? "\n" : "none\n");
 #endif
 
 	spin_unlock_irqrestore(host->host_lock, flags);

drivers/xen/xen-scsiback.c

@@ -47,6 +47,7 @@
 
 #include <generated/utsrelease.h>
 
+#include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_tcq.h>

include/linux/enclosure.h

@@ -79,6 +79,12 @@ struct enclosure_component_callbacks {
 	int (*set_locate)(struct enclosure_device *,
 			  struct enclosure_component *,
 			  enum enclosure_component_setting);
+	void (*get_power_status)(struct enclosure_device *,
+				 struct enclosure_component *);
+	int (*set_power_status)(struct enclosure_device *,
+				struct enclosure_component *,
+				int);
+	int (*show_id)(struct enclosure_device *, char *buf);
 };
 
 
@@ -91,7 +97,9 @@ struct enclosure_component {
 	int fault;
 	int active;
 	int locate;
+	int slot;
 	enum enclosure_status status;
+	int power_status;
 };
 
 struct enclosure_device {
@@ -120,8 +128,9 @@ enclosure_register(struct device *, const char *, int,
 		   struct enclosure_component_callbacks *);
 void enclosure_unregister(struct enclosure_device *);
 struct enclosure_component *
-enclosure_component_register(struct enclosure_device *, unsigned int,
-				 enum enclosure_component_type, const char *);
+enclosure_component_alloc(struct enclosure_device *, unsigned int,
+			  enum enclosure_component_type, const char *);
+int enclosure_component_register(struct enclosure_component *);
 int enclosure_add_device(struct enclosure_device *enclosure, int component,
 			 struct device *dev);
 int enclosure_remove_device(struct enclosure_device *, struct device *);

include/linux/phy/phy-qcom-ufs.h

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef PHY_QCOM_UFS_H_
+#define PHY_QCOM_UFS_H_
+
+#include "phy.h"
+
+/**
+ * ufs_qcom_phy_enable_ref_clk() - Enable the phy
+ * ref clock.
+ * @phy: reference to a generic phy
+ *
+ * returns 0 for success, and non-zero for error.
+ */
+int ufs_qcom_phy_enable_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_disable_ref_clk() - Disable the phy
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_disable_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
+
+int ufs_qcom_phy_enable_iface_clk(struct phy *phy);
+void ufs_qcom_phy_disable_iface_clk(struct phy *phy);
+int ufs_qcom_phy_start_serdes(struct phy *phy);
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
+int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
+int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
+void ufs_qcom_phy_save_controller_version(struct phy *phy,
+			u8 major, u16 minor, u16 step);
+
+#endif /* PHY_QCOM_UFS_H_ */

include/scsi/scsi.h

@@ -195,6 +195,9 @@ enum scsi_timeouts {
 #define	ATA_16		      0x85	/* 16-byte pass-thru */
 #define	ATA_12		      0xa1	/* 12-byte pass-thru */
 
+/* Vendor specific CDBs start here */
+#define VENDOR_SPECIFIC_CDB 0xc0
+
 /*
  *	SCSI command lengths
  */

include/scsi/scsi_dbg.h

@@ -5,8 +5,11 @@ struct scsi_cmnd;
 struct scsi_device;
 struct scsi_sense_hdr;
 
+#define SCSI_LOG_BUFSIZE 128
+
 extern void scsi_print_command(struct scsi_cmnd *);
-extern void __scsi_print_command(const unsigned char *, size_t);
+extern size_t __scsi_format_command(char *, size_t,
+				   const unsigned char *, size_t);
 extern void scsi_show_extd_sense(const struct scsi_device *, const char *,
 				 unsigned char, unsigned char);
 extern void scsi_show_sense_hdr(const struct scsi_device *, const char *,
@@ -17,12 +20,73 @@ extern void scsi_print_sense(const struct scsi_cmnd *);
 extern void __scsi_print_sense(const struct scsi_device *, const char *name,
 			       const unsigned char *sense_buffer,
 			       int sense_len);
-extern void scsi_print_result(struct scsi_cmnd *, const char *, int);
-extern const char *scsi_hostbyte_string(int);
-extern const char *scsi_driverbyte_string(int);
-extern const char *scsi_mlreturn_string(int);
+extern void scsi_print_result(const struct scsi_cmnd *, const char *, int);
+
+#ifdef CONFIG_SCSI_CONSTANTS
+extern bool scsi_opcode_sa_name(int, int, const char **, const char **);
 extern const char *scsi_sense_key_string(unsigned char);
 extern const char *scsi_extd_sense_format(unsigned char, unsigned char,
 					  const char **);
+extern const char *scsi_mlreturn_string(int);
+extern const char *scsi_hostbyte_string(int);
+extern const char *scsi_driverbyte_string(int);
+#else
+static inline bool
+scsi_opcode_sa_name(int cmd, int sa,
+		    const char **cdb_name, const char **sa_name)
+{
+	*cdb_name = NULL;
+	switch (cmd) {
+	case VARIABLE_LENGTH_CMD:
+	case MAINTENANCE_IN:
+	case MAINTENANCE_OUT:
+	case PERSISTENT_RESERVE_IN:
+	case PERSISTENT_RESERVE_OUT:
+	case SERVICE_ACTION_IN_12:
+	case SERVICE_ACTION_OUT_12:
+	case SERVICE_ACTION_BIDIRECTIONAL:
+	case SERVICE_ACTION_IN_16:
+	case SERVICE_ACTION_OUT_16:
+	case EXTENDED_COPY:
+	case RECEIVE_COPY_RESULTS:
+		*sa_name = NULL;
+		return true;
+	default:
+		return false;
+	}
+}
+
+static inline const char *
+scsi_sense_key_string(unsigned char key)
+{
+	return NULL;
+}
+
+static inline const char *
+scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
+{
+	*fmt = NULL;
+	return NULL;
+}
+
+static inline const char *
+scsi_mlreturn_string(int result)
+{
+	return NULL;
+}
+
+static inline const char *
+scsi_hostbyte_string(int result)
+{
+	return NULL;
+}
+
+static inline const char *
+scsi_driverbyte_string(int result)
+{
+	return NULL;
+}
+
+#endif
 
 #endif /* _SCSI_SCSI_DBG_H */

include/scsi/scsi_device.h

@@ -230,9 +230,6 @@ struct scsi_dh_data {
 #define transport_class_to_sdev(class_dev) \
 	to_scsi_device(class_dev->parent)
 
-#define sdev_printk(prefix, sdev, fmt, a...)	\
-	dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
-
 #define sdev_dbg(sdev, fmt, a...) \
 	dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
 
@@ -240,16 +237,15 @@ struct scsi_dh_data {
  * like scmd_printk, but the device name is passed in
  * as a string pointer
  */
-#define sdev_prefix_printk(l, sdev, p, fmt, a...)			\
-	(p) ?								\
-	sdev_printk(l, sdev, "[%s] " fmt, p, ##a) :			\
-	sdev_printk(l, sdev, fmt, ##a)
-
-#define scmd_printk(prefix, scmd, fmt, a...)				\
-        (scmd)->request->rq_disk ?					\
-	sdev_printk(prefix, (scmd)->device, "[%s] " fmt,		\
-		    (scmd)->request->rq_disk->disk_name, ##a) :		\
-	sdev_printk(prefix, (scmd)->device, fmt, ##a)
+__printf(4, 5) void
+sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
+		const char *, ...);
+
+#define sdev_printk(l, sdev, fmt, a...)				\
+	sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
+
+__printf(3, 4) void
+scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
 
 #define scmd_dbg(scmd, fmt, a...)					   \
 	do {								   \