Merge branch 'rotary-encoder' into next

Bring in updates to roraty encoder driver switching it away from legacy
platform data and over to generic device properties and adding support
for encoders using more than 2 GPIOs.

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -22,8 +22,7 @@ Required properties:
 Optional properties:
 - ti,hwmods:	Name of the hwmods associated to the eDMA CC
 - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
-		these channels will be SW triggered channels. The list must
-		contain 16 bits numbers, see example.
+		these channels will be SW triggered channels. See example.
 - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
 		the driver, they are allocated to be used by for example the
 		DSP. See example.
@@ -56,10 +55,9 @@ edma: edma@49000000 {
 	ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
 
 	/* Channel 20 and 21 is allocated for memcpy */
-	ti,edma-memcpy-channels = /bits/ 16 <20 21>;
-	/* The following PaRAM slots are reserved: 35-45 and 100-110 */
-	ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
-				       /bits/ 16 <100 10>;
+	ti,edma-memcpy-channels = <20 21>;
+	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
+	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
 };
 
 edma_tptc0: tptc@49800000 {

Documentation/devicetree/bindings/input/rotary-encoder.txt

@@ -1,7 +1,7 @@
 Rotary encoder DT bindings
 
 Required properties:
-- gpios: a spec for two GPIOs to be used
+- gpios: a spec for at least two GPIOs to be used, most significant first
 
 Optional properties:
 - linux,axis: the input subsystem axis to map to this rotary encoder.

Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt

@@ -12,7 +12,7 @@ Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
 Required subnode-properties:
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
-	- channel: Channel this key is attached to, mut be 0 or 1.
+	- channel: Channel this key is attached to, must be 0 or 1.
 	- voltage: Voltage in µV at lradc input when this key is pressed.
 
 Example:

Documentation/devicetree/bindings/mtd/partition.txt

@@ -6,7 +6,9 @@ used for what purposes, but which don't use an on-flash partition table such
 as RedBoot.
 
 The partition table should be a subnode of the mtd node and should be named
-'partitions'. Partitions are defined in subnodes of the partitions node.
+'partitions'. This node should have the following property:
+- compatible : (required) must be "fixed-partitions"
+Partitions are then defined in subnodes of the partitions node.
 
 For backwards compatibility partitions as direct subnodes of the mtd device are
 supported. This use is discouraged.
@@ -36,6 +38,7 @@ Examples:
 
 flash@0 {
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -53,6 +56,7 @@ flash@0 {
 
 flash@1 {
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <2>;
 
@@ -66,6 +70,7 @@ flash@1 {
 
 flash@2 {
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <2>;
 		#size-cells = <2>;
 

Documentation/devicetree/bindings/net/cpsw.txt

@@ -40,18 +40,18 @@ Optional properties:
 
 Slave Properties:
 Required properties:
-- phy_id		: Specifies slave phy id
 - phy-mode		: See ethernet.txt file in the same directory
 
 Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 - mac-address		: See ethernet.txt file in the same directory
+- phy_id		: Specifies slave phy id
 - phy-handle		: See ethernet.txt file in the same directory
 
 Slave sub-nodes:
 - fixed-link		: See fixed-link.txt file in the same directory
-			  Either the properties phy_id and phy-mode,
-			  or the sub-node fixed-link can be specified
+			  Either the property phy_id, or the sub-node
+			  fixed-link can be specified
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.

Documentation/networking/e100.txt

@@ -181,17 +181,3 @@ For general information, go to the Intel support website at:
 If an issue is identified with the released source code on the supported
 kernel with a supported adapter, email the specific information related to the
 issue to e1000-devel@lists.sourceforge.net.
-
-
-License
-=======
-
-This software program is released under the terms of a license agreement
-between you ('Licensee') and Intel. Do not use or load this software or any
-associated materials (collectively, the 'Software') until you have carefully
-read the full terms and conditions of the file COPYING located in this software
-package. By loading or using the Software, you agree to the terms of this
-Agreement. If you do not agree with the terms of this Agreement, do not install
-or use the Software.
-
-* Other names and brands may be claimed as the property of others.

MAINTAINERS

@@ -5578,7 +5578,7 @@ R:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 R:	Shannon Nelson <shannon.nelson@intel.com>
 R:	Carolyn Wyborny <carolyn.wyborny@intel.com>
 R:	Don Skidmore <donald.c.skidmore@intel.com>
-R:	Matthew Vick <matthew.vick@intel.com>
+R:	Bruce Allan <bruce.w.allan@intel.com>
 R:	John Ronciak <john.ronciak@intel.com>
 R:	Mitch Williams <mitch.a.williams@intel.com>
 L:	intel-wired-lan@lists.osuosl.org
@@ -8380,6 +8380,14 @@ L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pinctrl/samsung/
 
+PIN CONTROLLER - SINGLE
+M:	Tony Lindgren <tony@atomide.com>
+M:	Haojian Zhuang <haojian.zhuang@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/pinctrl/pinctrl-single.c
+
 PIN CONTROLLER - ST SPEAR
 M:	Viresh Kumar <vireshk@kernel.org>
 L:	spear-devel@list.st.com
@@ -8946,6 +8954,13 @@ F:	drivers/rpmsg/
 F:	Documentation/rpmsg.txt
 F:	include/linux/rpmsg.h
 
+RENESAS ETHERNET DRIVERS
+R:	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+L:	netdev@vger.kernel.org
+L:	linux-sh@vger.kernel.org
+F:	drivers/net/ethernet/renesas/
+F:	include/linux/sh_eth.h
+
 RESET CONTROLLER FRAMEWORK
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -445,6 +445,7 @@ config LINUX_LINK_BASE
 	  However some customers have peripherals mapped at this addr, so
 	  Linux needs to be scooted a bit.
 	  If you don't know what the above means, leave this setting alone.
+	  This needs to match memory start address specified in Device Tree
 
 config HIGHMEM
 	bool "High Memory Support"

arch/arc/Makefile

@@ -81,7 +81,7 @@ endif
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel
-KBUILD_CFLAGS_MODULE	+= -mlong-calls
+KBUILD_CFLAGS_MODULE	+= -mlong-calls -mno-millicode
 
 # Finally dump eveything into kernel build system
 KBUILD_CFLAGS	+= $(cflags-y)

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -46,6 +46,7 @@
 			snps,pbl = < 32 >;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
+			max-speed = <100>;
 		};
 
 		ehci@0x40000 {

arch/arc/boot/dts/nsim_hs.dts

@@ -17,7 +17,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
+		/* CONFIG_LINUX_LINK_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
 		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
 	};
 

arch/arc/include/asm/cache.h

@@ -62,9 +62,7 @@ extern int ioc_exists;
 #define ARC_REG_IC_IVIC		0x10
 #define ARC_REG_IC_CTRL		0x11
 #define ARC_REG_IC_IVIL		0x19
-#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4)
 #define ARC_REG_IC_PTAG		0x1E
-#endif
 #define ARC_REG_IC_PTAG_HI	0x1F
 
 /* Bit val in IC_CTRL */

arch/arc/include/asm/mach_desc.h

@@ -23,7 +23,7 @@
  * @dt_compat:		Array of device tree 'compatible' strings
  * 			(XXX: although only 1st entry is looked at)
  * @init_early:		Very early callback [called from setup_arch()]
- * @init_cpu_smp:	for each CPU as it is coming up (SMP as well as UP)
+ * @init_per_cpu:	for each CPU as it is coming up (SMP as well as UP)
  * 			[(M):init_IRQ(), (o):start_kernel_secondary()]
  * @init_machine:	arch initcall level callback (e.g. populate static
  * 			platform devices or parse Devicetree)
@@ -35,7 +35,7 @@ struct machine_desc {
 	const char		**dt_compat;
 	void			(*init_early)(void);
 #ifdef CONFIG_SMP
-	void			(*init_cpu_smp)(unsigned int);
+	void			(*init_per_cpu)(unsigned int);
 #endif
 	void			(*init_machine)(void);
 	void			(*init_late)(void);

arch/arc/include/asm/smp.h

@@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
  * @init_early_smp:	A SMP specific h/w block can init itself
  * 			Could be common across platforms so not covered by
  * 			mach_desc->init_early()
- * @init_irq_cpu:	Called for each core so SMP h/w block driver can do
+ * @init_per_cpu:	Called for each core so SMP h/w block driver can do
  * 			any needed setup per cpu (e.g. IPI request)
  * @cpu_kick:		For Master to kickstart a cpu (optionally at a PC)
  * @ipi_send:		To send IPI to a @cpu
@@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
 struct plat_smp_ops {
 	const char 	*info;
 	void		(*init_early_smp)(void);
-	void		(*init_irq_cpu)(int cpu);
+	void		(*init_per_cpu)(int cpu);
 	void		(*cpu_kick)(int cpu, unsigned long pc);
 	void		(*ipi_send)(int cpu);
 	void		(*ipi_clear)(int irq);

arch/arc/include/asm/unwind.h

@@ -112,7 +112,6 @@ struct unwind_frame_info {
 
 extern int arc_unwind(struct unwind_frame_info *frame);
 extern void arc_unwind_init(void);
-extern void arc_unwind_setup(void);
 extern void *unwind_add_table(struct module *module, const void *table_start,
 			      unsigned long table_size);
 extern void unwind_remove_table(void *handle, int init_only);
@@ -152,9 +151,6 @@ static inline void arc_unwind_init(void)
 {
 }
 
-static inline void arc_unwind_setup(void)
-{
-}
 #define unwind_add_table(a, b, c)
 #define unwind_remove_table(a, b)
 

arch/arc/kernel/intc-arcv2.c

@@ -106,10 +106,21 @@ static struct irq_chip arcv2_irq_chip = {
 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
 			 irq_hw_number_t hw)
 {
-	if (irq == TIMER0_IRQ || irq == IPI_IRQ)
+	/*
+	 * core intc IRQs [16, 23]:
+	 * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
+	 */
+	if (hw < 24) {
+		/*
+		 * A subsequent request_percpu_irq() fails if percpu_devid is
+		 * not set. That in turns sets NOAUTOEN, meaning each core needs
+		 * to call enable_percpu_irq()
+		 */
+		irq_set_percpu_devid(irq);
 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
-	else
+	} else {
 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
+	}
 
 	return 0;
 }

arch/arc/kernel/irq.c

@@ -29,11 +29,11 @@ void __init init_IRQ(void)
 
 #ifdef CONFIG_SMP
 	/* a SMP H/w block could do IPI IRQ request here */
-	if (plat_smp_ops.init_irq_cpu)
-		plat_smp_ops.init_irq_cpu(smp_processor_id());
+	if (plat_smp_ops.init_per_cpu)
+		plat_smp_ops.init_per_cpu(smp_processor_id());
 
-	if (machine_desc->init_cpu_smp)
-		machine_desc->init_cpu_smp(smp_processor_id());
+	if (machine_desc->init_per_cpu)
+		machine_desc->init_per_cpu(smp_processor_id());
 #endif
 }
 
@@ -51,6 +51,18 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
+/*
+ * API called for requesting percpu interrupts - called by each CPU
+ *  - For boot CPU, actually request the IRQ with genirq core + enables
+ *  - For subsequent callers only enable called locally
+ *
+ * Relies on being called by boot cpu first (i.e. request called ahead) of
+ * any enable as expected by genirq. Hence Suitable only for TIMER, IPI
+ * which are guaranteed to be setup on boot core first.
+ * Late probed peripherals such as perf can't use this as there no guarantee
+ * of being called on boot CPU first.
+ */
+
 void arc_request_percpu_irq(int irq, int cpu,
                             irqreturn_t (*isr)(int irq, void *dev),
                             const char *irq_nm,
@@ -60,14 +72,17 @@ void arc_request_percpu_irq(int irq, int cpu,
 	if (!cpu) {
 		int rc;
 
+#ifdef CONFIG_ISA_ARCOMPACT
 		/*
-		 * These 2 calls are essential to making percpu IRQ APIs work
-		 * Ideally these details could be hidden in irq chip map function
-		 * but the issue is IPIs IRQs being static (non-DT) and platform
-		 * specific, so we can't identify them there.
+		 * A subsequent request_percpu_irq() fails if percpu_devid is
+		 * not set. That in turns sets NOAUTOEN, meaning each core needs
+		 * to call enable_percpu_irq()
+		 *
+		 * For ARCv2, this is done in irq map function since we know
+		 * which irqs are strictly per cpu
 		 */
 		irq_set_percpu_devid(irq);
-		irq_modify_status(irq, IRQ_NOAUTOEN, 0);  /* @irq, @clr, @set */
+#endif
 
 		rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev);
 		if (rc)

arch/arc/kernel/mcip.c

@@ -132,7 +132,7 @@ static void mcip_probe_n_setup(void)
 struct plat_smp_ops plat_smp_ops = {
 	.info		= smp_cpuinfo_buf,
 	.init_early_smp	= mcip_probe_n_setup,
-	.init_irq_cpu	= mcip_setup_per_cpu,
+	.init_per_cpu	= mcip_setup_per_cpu,
 	.ipi_send	= mcip_ipi_send,
 	.ipi_clear	= mcip_ipi_clear,
 };

arch/arc/kernel/perf_event.c

@@ -428,12 +428,11 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 #endif /* CONFIG_ISA_ARCV2 */
 
-void arc_cpu_pmu_irq_init(void)
+static void arc_cpu_pmu_irq_init(void *data)
 {
-	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+	int irq = *(int *)data;
 
-	arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr,
-			       "ARC perf counters", pmu_cpu);
+	enable_percpu_irq(irq, IRQ_TYPE_NONE);
 
 	/* Clear all pending interrupt flags */
 	write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
@@ -515,7 +514,6 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 
 	if (has_interrupts) {
 		int irq = platform_get_irq(pdev, 0);
-		unsigned long flags;
 
 		if (irq < 0) {
 			pr_err("Cannot get IRQ number for the platform\n");
@@ -524,24 +522,12 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 
 		arc_pmu->irq = irq;
 
-		/*
-		 * arc_cpu_pmu_irq_init() needs to be called on all cores for
-		 * their respective local PMU.
-		 * However we use opencoded on_each_cpu() to ensure it is called
-		 * on core0 first, so that arc_request_percpu_irq() sets up
-		 * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable
-		 * perf IRQ on non master cores.
-		 * see arc_request_percpu_irq()
-		 */
-		preempt_disable();
-		local_irq_save(flags);
-		arc_cpu_pmu_irq_init();
-		local_irq_restore(flags);
-		smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1);
-		preempt_enable();
-
-		/* Clean all pending interrupt flags */
-		write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+		/* intc map function ensures irq_set_percpu_devid() called */
+		request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+				   this_cpu_ptr(&arc_pmu_cpu));
+
+		on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+
 	} else
 		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 

arch/arc/kernel/setup.c

@@ -429,7 +429,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	arc_unwind_init();
-	arc_unwind_setup();
 }
 
 static int __init customize_machine(void)

arch/arc/kernel/smp.c

@@ -132,11 +132,11 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	/* Some SMP H/w setup - for each cpu */
-	if (plat_smp_ops.init_irq_cpu)
-		plat_smp_ops.init_irq_cpu(cpu);
+	if (plat_smp_ops.init_per_cpu)
+		plat_smp_ops.init_per_cpu(cpu);
 
-	if (machine_desc->init_cpu_smp)
-		machine_desc->init_cpu_smp(cpu);
+	if (machine_desc->init_per_cpu)
+		machine_desc->init_per_cpu(cpu);
 
 	arc_local_timer_setup();
 

arch/arc/kernel/unwind.c

@@ -170,6 +170,23 @@ static struct unwind_table *find_table(unsigned long pc)
 
 static unsigned long read_pointer(const u8 **pLoc,
 				  const void *end, signed ptrType);
+static void init_unwind_hdr(struct unwind_table *table,
+			    void *(*alloc) (unsigned long));
+
+/*
+ * wrappers for header alloc (vs. calling one vs. other at call site)
+ * to elide section mismatches warnings
+ */
+static void *__init unw_hdr_alloc_early(unsigned long sz)
+{
+	return __alloc_bootmem_nopanic(sz, sizeof(unsigned int),
+				       MAX_DMA_ADDRESS);
+}
+
+static void *unw_hdr_alloc(unsigned long sz)
+{
+	return kmalloc(sz, GFP_KERNEL);
+}
 
 static void init_unwind_table(struct unwind_table *table, const char *name,
 			      const void *core_start, unsigned long core_size,
@@ -209,6 +226,8 @@ void __init arc_unwind_init(void)
 			  __start_unwind, __end_unwind - __start_unwind,
 			  NULL, 0);
 	  /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/
+
+	init_unwind_hdr(&root_table, unw_hdr_alloc_early);
 }
 
 static const u32 bad_cie, not_fde;
@@ -241,8 +260,8 @@ static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
 	e2->fde = v;
 }
 
-static void __init setup_unwind_table(struct unwind_table *table,
-				      void *(*alloc) (unsigned long))
+static void init_unwind_hdr(struct unwind_table *table,
+			    void *(*alloc) (unsigned long))
 {
 	const u8 *ptr;
 	unsigned long tableSize = table->size, hdrSize;
@@ -277,10 +296,10 @@ static void __init setup_unwind_table(struct unwind_table *table,
 		if (cie == &not_fde)
 			continue;
 		if (cie == NULL || cie == &bad_cie)
-			return;
+			goto ret_err;
 		ptrType = fde_pointer_type(cie);
 		if (ptrType < 0)
-			return;
+			goto ret_err;
 
 		ptr = (const u8 *)(fde + 2);
 		if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde,
@@ -296,13 +315,15 @@ static void __init setup_unwind_table(struct unwind_table *table,
 	}
 
 	if (tableSize || !n)
-		return;
+		goto ret_err;
 
 	hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int)
 	    + 2 * n * sizeof(unsigned long);
+
 	header = alloc(hdrSize);
 	if (!header)
-		return;
+		goto ret_err;
+
 	header->version = 1;
 	header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native;
 	header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4;
@@ -340,18 +361,10 @@ static void __init setup_unwind_table(struct unwind_table *table,
 	table->hdrsz = hdrSize;
 	smp_wmb();
 	table->header = (const void *)header;
-}
-
-static void *__init balloc(unsigned long sz)
-{
-	return __alloc_bootmem_nopanic(sz,
-				       sizeof(unsigned int),
-				       __pa(MAX_DMA_ADDRESS));
-}
+	return;
 
-void __init arc_unwind_setup(void)
-{
-	setup_unwind_table(&root_table, balloc);
+ret_err:
+	panic("Attention !!! Dwarf FDE parsing errors\n");;
 }
 
 #ifdef CONFIG_MODULES
@@ -377,6 +390,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 			  table_start, table_size,
 			  NULL, 0);
 
+	init_unwind_hdr(table, unw_hdr_alloc);
+
 #ifdef UNWIND_DEBUG
 	unw_debug("Table added for [%s] %lx %lx\n",
 		module->name, table->core.pc, table->core.range);
@@ -439,6 +454,7 @@ void unwind_remove_table(void *handle, int init_only)
 	info.init_only = init_only;
 
 	unlink_table(&info); /* XXX: SMP */
+	kfree(table->header);
 	kfree(table);
 }
 
@@ -588,9 +604,6 @@ static signed fde_pointer_type(const u32 *cie)
 	const u8 *ptr = (const u8 *)(cie + 2);
 	unsigned version = *ptr;
 
-	if (version != 1)
-		return -1;	/* unsupported */
-
 	if (*++ptr) {
 		const char *aug;
 		const u8 *end = (const u8 *)(cie + 1) + *cie;
@@ -1002,9 +1015,7 @@ int arc_unwind(struct unwind_frame_info *frame)
 		ptr = (const u8 *)(cie + 2);
 		end = (const u8 *)(cie + 1) + *cie;
 		frame->call_frame = 1;
-		if ((state.version = *ptr) != 1)
-			cie = NULL;	/* unsupported version */
-		else if (*++ptr) {
+		if (*++ptr) {
 			/* check if augmentation size is first (thus present) */
 			if (*ptr == 'z') {
 				while (++ptr < end && *ptr) {

arch/arc/mm/highmem.c

@@ -111,7 +111,7 @@ void __kunmap_atomic(void *kv)
 }
 EXPORT_SYMBOL(__kunmap_atomic);
 
-noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr)
+static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr)
 {
 	pgd_t *pgd_k;
 	pud_t *pud_k;
@@ -127,7 +127,7 @@ noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr)
 	return pte_k;
 }
 
-void kmap_init(void)
+void __init kmap_init(void)
 {
 	/* Due to recursive include hell, we can't do this in processor.h */
 	BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE));

arch/arc/mm/init.c

@@ -51,7 +51,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	int in_use = 0;
 
 	if (!low_mem_sz) {
-		BUG_ON(base != low_mem_start);
+		if (base != low_mem_start)
+			panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
+
 		low_mem_sz = size;
 		in_use = 1;
 	} else {

arch/arm/boot/dts/imx6q-gw5400-a.dts

@@ -154,7 +154,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw51xx.dtsi

@@ -94,7 +94,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi

@@ -154,7 +154,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw53xx.dtsi

@@ -155,7 +155,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

@@ -145,7 +145,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -113,14 +113,14 @@
 &clks {
 	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
 			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
 			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
 				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
 				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <24576000>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
 };
 
 &ecspi1 {

arch/arm/boot/dts/omap4-duovero-parlor.dts

@@ -189,3 +189,7 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -25,9 +25,9 @@
 		cache-sets = <512>;
 		cache-line-size = <32>;
 		/* At full speed latency must be >=2 */
-		arm,tag-latency = <2>;
-		arm,data-latency = <2 2>;
-		arm,dirty-latency = <2>;
+		arm,tag-latency = <8>;
+		arm,data-latency = <8 8>;
+		arm,dirty-latency = <8>;
 	};
 
 	mtu0: mtu@101e2000 {

arch/arm/boot/dts/sun6i-a31s-primo81.dts

@@ -83,6 +83,7 @@
 		reg = <0x5d>;
 		interrupt-parent = <&pio>;
 		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
 	};
 };
 

arch/arm/boot/dts/tegra124-nyan.dtsi

@@ -399,7 +399,7 @@
 
 	/* CPU DFLL clock */
 	clock@0,70110000 {
-		status = "okay";
+		status = "disabled";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};

arch/arm/boot/dts/versatile-ab.dts

@@ -110,7 +110,11 @@
 			interrupt-parent = <&vic>;
 			interrupts = <31>; /* Cascaded to vic */
 			clear-mask = <0xffffffff>;
-			valid-mask = <0xffc203f8>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
 		};
 
 		dma@10130000 {
@@ -266,8 +270,8 @@
 			};
 			mmc@5000 {
 				compatible = "arm,pl180", "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts-extended = <&vic 22 &sic 2>;
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};

arch/arm/boot/dts/versatile-pb.dts

@@ -5,6 +5,16 @@
 	compatible = "arm,versatile-pb";
 
 	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: intc@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
 		gpio2: gpio@101e6000 {
 			compatible = "arm,pl061", "arm,primecell";
 			reg = <0x101e6000 0x1000>;
@@ -67,6 +77,13 @@
 		};
 
 		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
 			uart@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
@@ -86,7 +103,8 @@
 			mmc@b000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts-extended = <&vic 23 &sic 2>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};

arch/arm/boot/dts/wm8650.dtsi

@@ -187,6 +187,15 @@
 			interrupts = <43>;
 		};
 
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
 		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;

arch/arm/configs/multi_v7_defconfig

@@ -366,6 +366,7 @@ CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_TPS65090=y
+CONFIG_AXP20X_POWER=m
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y

arch/arm/configs/sunxi_defconfig

@@ -84,6 +84,7 @@ CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_AXP20X_POWER=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y

arch/arm/include/asm/uaccess.h

@@ -510,10 +510,14 @@ __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
+#ifndef CONFIG_UACCESS_WITH_MEMCPY
 	unsigned int __ua_flags = uaccess_save_and_enable();
 	n = arm_copy_to_user(to, from, n);
 	uaccess_restore(__ua_flags);
 	return n;
+#else
+	return arm_copy_to_user(to, from, n);
+#endif
 }
 
 extern unsigned long __must_check

arch/arm/kernel/process.c

@@ -95,6 +95,22 @@ void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags;
 	char buf[64];
+#ifndef CONFIG_CPU_V7M
+	unsigned int domain;
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Get the domain register for the parent context. In user
+	 * mode, we don't save the DACR, so lets use what it should
+	 * be. For other modes, we place it after the pt_regs struct.
+	 */
+	if (user_mode(regs))
+		domain = DACR_UACCESS_ENABLE;
+	else
+		domain = *(unsigned int *)(regs + 1);
+#else
+	domain = get_domain();
+#endif
+#endif
 
 	show_regs_print_info(KERN_DEFAULT);
 
@@ -123,21 +139,8 @@ void __show_regs(struct pt_regs *regs)
 
 #ifndef CONFIG_CPU_V7M
 	{
-		unsigned int domain = get_domain();
 		const char *segment;
 
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-		/*
-		 * Get the domain register for the parent context. In user
-		 * mode, we don't save the DACR, so lets use what it should
-		 * be. For other modes, we place it after the pt_regs struct.
-		 */
-		if (user_mode(regs))
-			domain = DACR_UACCESS_ENABLE;
-		else
-			domain = *(unsigned int *)(regs + 1);
-#endif
-
 		if ((domain & domain_mask(DOMAIN_USER)) ==
 		    domain_val(DOMAIN_USER, DOMAIN_NOACCESS))
 			segment = "none";
@@ -163,11 +166,11 @@ void __show_regs(struct pt_regs *regs)
 		buf[0] = '\0';
 #ifdef CONFIG_CPU_CP15_MMU
 		{
-			unsigned int transbase, dac = get_domain();
+			unsigned int transbase;
 			asm("mrc p15, 0, %0, c2, c0\n\t"
 			    : "=r" (transbase));
 			snprintf(buf, sizeof(buf), "  Table: %08x  DAC: %08x",
-			  	transbase, dac);
+				transbase, domain);
 		}
 #endif
 		asm("mrc p15, 0, %0, c1, c0\n" : "=r" (ctrl));

arch/arm/kernel/swp_emulate.c

@@ -36,10 +36,10 @@
  */
 #define __user_swpX_asm(data, addr, res, temp, B)		\
 	__asm__ __volatile__(					\
-	"	mov		%2, %1\n"			\
-	"0:	ldrex"B"	%1, [%3]\n"			\
-	"1:	strex"B"	%0, %2, [%3]\n"			\
+	"0:	ldrex"B"	%2, [%3]\n"			\
+	"1:	strex"B"	%0, %1, [%3]\n"			\
 	"	cmp		%0, #0\n"			\
+	"	moveq		%1, %2\n"			\
 	"	movne		%0, %4\n"			\
 	"2:\n"							\
 	"	.section	 .text.fixup,\"ax\"\n"		\

arch/arm/kernel/sys_oabi-compat.c

@@ -193,15 +193,44 @@ struct oabi_flock64 {
 	pid_t	l_pid;
 } __attribute__ ((packed,aligned(4)));
 
-asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+static long do_locks(unsigned int fd, unsigned int cmd,
 				 unsigned long arg)
 {
-	struct oabi_flock64 user;
 	struct flock64 kernel;
-	mm_segment_t fs = USER_DS; /* initialized to kill a warning */
-	unsigned long local_arg = arg;
-	int ret;
+	struct oabi_flock64 user;
+	mm_segment_t fs;
+	long ret;
+
+	if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
+			   sizeof(user)))
+		return -EFAULT;
+	kernel.l_type	= user.l_type;
+	kernel.l_whence	= user.l_whence;
+	kernel.l_start	= user.l_start;
+	kernel.l_len	= user.l_len;
+	kernel.l_pid	= user.l_pid;
+
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+	ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel);
+	set_fs(fs);
+
+	if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) {
+		user.l_type	= kernel.l_type;
+		user.l_whence	= kernel.l_whence;
+		user.l_start	= kernel.l_start;
+		user.l_len	= kernel.l_len;
+		user.l_pid	= kernel.l_pid;
+		if (copy_to_user((struct oabi_flock64 __user *)arg,
+				 &user, sizeof(user)))
+			ret = -EFAULT;
+	}
+	return ret;
+}
 
+asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+				 unsigned long arg)
+{
 	switch (cmd) {
 	case F_OFD_GETLK:
 	case F_OFD_SETLK:
@@ -209,39 +238,11 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 	case F_GETLK64:
 	case F_SETLK64:
 	case F_SETLKW64:
-		if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
-				   sizeof(user)))
-			return -EFAULT;
-		kernel.l_type	= user.l_type;
-		kernel.l_whence	= user.l_whence;
-		kernel.l_start	= user.l_start;
-		kernel.l_len	= user.l_len;
-		kernel.l_pid	= user.l_pid;
-		local_arg = (unsigned long)&kernel;
-		fs = get_fs();
-		set_fs(KERNEL_DS);
-	}
-
-	ret = sys_fcntl64(fd, cmd, local_arg);
+		return do_locks(fd, cmd, arg);
 
-	switch (cmd) {
-	case F_GETLK64:
-		if (!ret) {
-			user.l_type	= kernel.l_type;
-			user.l_whence	= kernel.l_whence;
-			user.l_start	= kernel.l_start;
-			user.l_len	= kernel.l_len;
-			user.l_pid	= kernel.l_pid;
-			if (copy_to_user((struct oabi_flock64 __user *)arg,
-					 &user, sizeof(user)))
-				ret = -EFAULT;
-		}
-	case F_SETLK64:
-	case F_SETLKW64:
-		set_fs(fs);
+	default:
+		return sys_fcntl64(fd, cmd, arg);
 	}
-
-	return ret;
 }
 
 struct oabi_epoll_event {

arch/arm/lib/uaccess_with_memcpy.c

@@ -88,6 +88,7 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 static unsigned long noinline
 __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 {
+	unsigned long ua_flags;
 	int atomic;
 
 	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
@@ -118,7 +119,9 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 		if (tocopy > n)
 			tocopy = n;
 
+		ua_flags = uaccess_save_and_enable();
 		memcpy((void *)to, from, tocopy);
+		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
 		n -= tocopy;
@@ -145,14 +148,21 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n)
 	 * With frame pointer disabled, tail call optimization kicks in
 	 * as well making this test almost invisible.
 	 */
-	if (n < 64)
-		return __copy_to_user_std(to, from, n);
-	return __copy_to_user_memcpy(to, from, n);
+	if (n < 64) {
+		unsigned long ua_flags = uaccess_save_and_enable();
+		n = __copy_to_user_std(to, from, n);
+		uaccess_restore(ua_flags);
+	} else {
+		n = __copy_to_user_memcpy(to, from, n);
+	}
+	return n;
 }
 	
 static unsigned long noinline
 __clear_user_memset(void __user *addr, unsigned long n)
 {
+	unsigned long ua_flags;
+
 	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
 		memset((void *)addr, 0, n);
 		return 0;
@@ -175,7 +185,9 @@ __clear_user_memset(void __user *addr, unsigned long n)
 		if (tocopy > n)
 			tocopy = n;
 
+		ua_flags = uaccess_save_and_enable();
 		memset((void *)addr, 0, tocopy);
+		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
 
@@ -193,9 +205,14 @@ out:
 unsigned long arm_clear_user(void __user *addr, unsigned long n)
 {
 	/* See rational for this in __copy_to_user() above. */
-	if (n < 64)
-		return __clear_user_std(addr, n);
-	return __clear_user_memset(addr, n);
+	if (n < 64) {
+		unsigned long ua_flags = uaccess_save_and_enable();
+		n = __clear_user_std(addr, n);
+		uaccess_restore(ua_flags);
+	} else {
+		n = __clear_user_memset(addr, n);
+	}
+	return n;
 }
 
 #if 0

arch/arm/mach-omap2/Kconfig

@@ -65,6 +65,8 @@ config SOC_AM43XX
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
 	select HAVE_ARM_SCU
+	select GENERIC_CLOCKEVENTS_BROADCAST
+	select HAVE_ARM_TWD
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"

arch/arm/mach-omap2/gpmc-onenand.c

@@ -149,8 +149,8 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
 		freq = 104;
 		break;
 	default:
-		freq = 54;
-		break;
+		pr_err("onenand rate not detected, bad GPMC async timings?\n");
+		freq = 0;
 	}
 
 	return freq;
@@ -271,6 +271,11 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
+	/*
+	 * Note that we need to keep sync_write set for the call to
+	 * omap2_onenand_set_async_mode() to work to detect the onenand
+	 * supported clock rate for the sync timings.
+	 */
 	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
@@ -281,12 +286,9 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 			else
 				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 			onenand_async.sync_read = false;
-			onenand_async.sync_write = false;
 		}
 	}
 
-	omap2_onenand_set_async_mode(onenand_base);
-
 	omap2_onenand_calc_async_timings(&t);
 
 	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
@@ -310,6 +312,8 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
 	if (!freq) {
 		/* Very first call freq is not known */
 		freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+		if (!freq)
+			return -ENODEV;
 		set_onenand_cfg(onenand_base);
 	}
 

arch/arm/mach-omap2/timer.c

@@ -320,6 +320,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	return r;
 }
 
+#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+void tick_broadcast(const struct cpumask *mask)
+{
+}
+#endif
+
 static void __init omap2_gp_clockevent_init(int gptimer_id,
 						const char *fck_source,
 						const char *property)

arch/arm/mach-pxa/raumfeld.c

@@ -18,12 +18,13 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/property.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/input.h>
-#include <linux/rotary_encoder.h>
 #include <linux/gpio_keys.h>
 #include <linux/input/eeti_ts.h>
 #include <linux/leds.h>
@@ -366,22 +367,38 @@ static struct pxaohci_platform_data raumfeld_ohci_info = {
  * Rotary encoder input device
  */
 
-static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
-	.steps		= 24,
-	.axis		= REL_X,
-	.relative_axis	= 1,
-	.gpio_a		= GPIO_VOLENC_A,
-	.gpio_b		= GPIO_VOLENC_B,
-	.inverted_a	= 1,
-	.inverted_b	= 0,
+static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
+	.dev_id = "rotary-encoder.0",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-0",
+				GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-0",
+				GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static u32 raumfeld_rotary_encoder_steps = 24;
+static u32 raumfeld_rotary_encoder_axis = REL_X;
+static u32 raumfeld_rotary_encoder_relative_axis = 1;
+
+static struct property_entry raumfeld_rotary_properties[] = {
+	{ "rotary-encoder,steps-per-period",
+		DEV_PROP_U32, 1, &raumfeld_rotary_encoder_steps, },
+	{ "linux,axis",
+		DEV_PROP_U32, 1, &raumfeld_rotary_encoder_axis, },
+	{ "rotary-encoder,relative_axis",
+		DEV_PROP_U32, 1, &raumfeld_rotary_encoder_relative_axis, },
+	{ NULL }
+};
+
+static struct property_set raumfeld_rotary_property_set = {
+	.properties = raumfeld_rotary_properties,
 };
 
 static struct platform_device rotary_encoder_device = {
 	.name		= "rotary-encoder",
 	.id		= 0,
-	.dev		= {
-		.platform_data = &raumfeld_rotary_encoder_info,
-	}
 };
 
 /**
@@ -1051,7 +1068,12 @@ static void __init raumfeld_controller_init(void)
 	int ret;
 
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+
+	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+	device_add_property_set(&rotary_encoder_device.dev,
+				&raumfeld_rotary_property_set);
 	platform_device_register(&rotary_encoder_device);
+
 	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
 	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
 
@@ -1086,6 +1108,10 @@ static void __init raumfeld_speaker_init(void)
 	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
 
 	platform_device_register(&smc91x_device);
+
+	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+	device_add_property_set(&rotary_encoder_device.dev,
+				&raumfeld_rotary_property_set);
 	platform_device_register(&rotary_encoder_device);
 
 	raumfeld_audio_init();

arch/arm/mm/context.c

@@ -165,13 +165,28 @@ static void flush_context(unsigned int cpu)
 		__flush_icache_all();
 }
 
-static int is_reserved_asid(u64 asid)
+static bool check_update_reserved_asid(u64 asid, u64 newasid)
 {
 	int cpu;
-	for_each_possible_cpu(cpu)
-		if (per_cpu(reserved_asids, cpu) == asid)
-			return 1;
-	return 0;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved ASIDs looking for a match.
+	 * If we find one, then we can update our mm to use newasid
+	 * (i.e. the same ASID in the current generation) but we can't
+	 * exit the loop early, since we need to ensure that all copies
+	 * of the old ASID are updated to reflect the mm. Failure to do
+	 * so could result in us missing the reserved ASID in a future
+	 * generation.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_asids, cpu) == asid) {
+			hit = true;
+			per_cpu(reserved_asids, cpu) = newasid;
+		}
+	}
+
+	return hit;
 }
 
 static u64 new_context(struct mm_struct *mm, unsigned int cpu)
@@ -181,12 +196,14 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 	u64 generation = atomic64_read(&asid_generation);
 
 	if (asid != 0) {
+		u64 newasid = generation | (asid & ~ASID_MASK);
+
 		/*
 		 * If our current ASID was active during a rollover, we
 		 * can continue to use it and this was just a false alarm.
 		 */
-		if (is_reserved_asid(asid))
-			return generation | (asid & ~ASID_MASK);
+		if (check_update_reserved_asid(asid, newasid))
+			return newasid;
 
 		/*
 		 * We had a valid ASID in a previous life, so try to re-use
@@ -194,7 +211,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 		 */
 		asid &= ~ASID_MASK;
 		if (!__test_and_set_bit(asid, asid_map))
-			goto bump_gen;
+			return newasid;
 	}
 
 	/*
@@ -216,11 +233,8 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 
 	__set_bit(asid, asid_map);
 	cur_idx = asid;
-
-bump_gen:
-	asid |= generation;
 	cpumask_clear(mm_cpumask(mm));
-	return asid;
+	return asid | generation;
 }
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)

arch/arm/mm/dma-mapping.c

@@ -1521,7 +1521,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 		return -ENOMEM;
 
 	for (count = 0, s = sg; count < (size >> PAGE_SHIFT); s = sg_next(s)) {
-		phys_addr_t phys = sg_phys(s) & PAGE_MASK;
+		phys_addr_t phys = page_to_phys(sg_page(s));
 		unsigned int len = PAGE_ALIGN(s->offset + s->length);
 
 		if (!is_coherent &&

arch/arm/mm/init.c

@@ -22,6 +22,7 @@
 #include <linux/memblock.h>
 #include <linux/dma-contiguous.h>
 #include <linux/sizes.h>
+#include <linux/stop_machine.h>
 
 #include <asm/cp15.h>
 #include <asm/mach-types.h>
@@ -627,12 +628,10 @@ static struct section_perm ro_perms[] = {
  * safe to be called with preemption disabled, as under stop_machine().
  */
 static inline void section_update(unsigned long addr, pmdval_t mask,
-				  pmdval_t prot)
+				  pmdval_t prot, struct mm_struct *mm)
 {
-	struct mm_struct *mm;
 	pmd_t *pmd;
 
-	mm = current->active_mm;
 	pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr);
 
 #ifdef CONFIG_ARM_LPAE
@@ -656,49 +655,82 @@ static inline bool arch_has_strict_perms(void)
 	return !!(get_cr() & CR_XP);
 }
 
-#define set_section_perms(perms, field)	{				\
-	size_t i;							\
-	unsigned long addr;						\
-									\
-	if (!arch_has_strict_perms())					\
-		return;							\
-									\
-	for (i = 0; i < ARRAY_SIZE(perms); i++) {			\
-		if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||	\
-		    !IS_ALIGNED(perms[i].end, SECTION_SIZE)) {		\
-			pr_err("BUG: section %lx-%lx not aligned to %lx\n", \
-				perms[i].start, perms[i].end,		\
-				SECTION_SIZE);				\
-			continue;					\
-		}							\
-									\
-		for (addr = perms[i].start;				\
-		     addr < perms[i].end;				\
-		     addr += SECTION_SIZE)				\
-			section_update(addr, perms[i].mask,		\
-				       perms[i].field);			\
-	}								\
+void set_section_perms(struct section_perm *perms, int n, bool set,
+			struct mm_struct *mm)
+{
+	size_t i;
+	unsigned long addr;
+
+	if (!arch_has_strict_perms())
+		return;
+
+	for (i = 0; i < n; i++) {
+		if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||
+		    !IS_ALIGNED(perms[i].end, SECTION_SIZE)) {
+			pr_err("BUG: section %lx-%lx not aligned to %lx\n",
+				perms[i].start, perms[i].end,
+				SECTION_SIZE);
+			continue;
+		}
+
+		for (addr = perms[i].start;
+		     addr < perms[i].end;
+		     addr += SECTION_SIZE)
+			section_update(addr, perms[i].mask,
+				set ? perms[i].prot : perms[i].clear, mm);
+	}
+
 }
 
-static inline void fix_kernmem_perms(void)
+static void update_sections_early(struct section_perm perms[], int n)
 {
-	set_section_perms(nx_perms, prot);
+	struct task_struct *t, *s;
+
+	read_lock(&tasklist_lock);
+	for_each_process(t) {
+		if (t->flags & PF_KTHREAD)
+			continue;
+		for_each_thread(t, s)
+			set_section_perms(perms, n, true, s->mm);
+	}
+	read_unlock(&tasklist_lock);
+	set_section_perms(perms, n, true, current->active_mm);
+	set_section_perms(perms, n, true, &init_mm);
+}
+
+int __fix_kernmem_perms(void *unused)
+{
+	update_sections_early(nx_perms, ARRAY_SIZE(nx_perms));
+	return 0;
+}
+
+void fix_kernmem_perms(void)
+{
+	stop_machine(__fix_kernmem_perms, NULL, NULL);
 }
 
 #ifdef CONFIG_DEBUG_RODATA
+int __mark_rodata_ro(void *unused)
+{
+	update_sections_early(ro_perms, ARRAY_SIZE(ro_perms));
+	return 0;
+}
+
 void mark_rodata_ro(void)
 {
-	set_section_perms(ro_perms, prot);
+	stop_machine(__mark_rodata_ro, NULL, NULL);
 }
 
 void set_kernel_text_rw(void)
 {
-	set_section_perms(ro_perms, clear);
+	set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), false,
+				current->active_mm);
 }
 
 void set_kernel_text_ro(void)
 {
-	set_section_perms(ro_perms, prot);
+	set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true,
+				current->active_mm);
 }
 #endif /* CONFIG_DEBUG_RODATA */
 

arch/arm/mm/proc-v7.S

@@ -95,7 +95,7 @@ ENDPROC(cpu_v7_dcache_clean_area)
 .equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
-	stmfd	sp!, {r4 - r10, lr}
+	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	stmia	r0!, {r4 - r5}
@@ -112,7 +112,7 @@ ENTRY(cpu_v7_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	stmia	r0, {r5 - r11}
-	ldmfd	sp!, {r4 - r10, pc}
+	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)
 
 ENTRY(cpu_v7_do_resume)

arch/arm/net/bpf_jit_32.c

@@ -187,19 +187,6 @@ static inline int mem_words_used(struct jit_ctx *ctx)
 	return fls(ctx->seen & SEEN_MEM);
 }
 
-static inline bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		return true;
-	default:
-		return false;
-	}
-}
-
 static void jit_fill_hole(void *area, unsigned int size)
 {
 	u32 *ptr;
@@ -211,7 +198,6 @@ static void jit_fill_hole(void *area, unsigned int size)
 static void build_prologue(struct jit_ctx *ctx)
 {
 	u16 reg_set = saved_regs(ctx);
-	u16 first_inst = ctx->skf->insns[0].code;
 	u16 off;
 
 #ifdef CONFIG_FRAME_POINTER
@@ -241,7 +227,7 @@ static void build_prologue(struct jit_ctx *ctx)
 		emit(ARM_MOV_I(r_X, 0), ctx);
 
 	/* do not leak kernel data to userspace */
-	if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
 		emit(ARM_MOV_I(r_A, 0), ctx);
 
 	/* stack space for the BPF_MEM words */
@@ -770,7 +756,8 @@ load_ind:
 		case BPF_ALU | BPF_RSH | BPF_K:
 			if (unlikely(k > 31))
 				return -1;
-			emit(ARM_LSR_I(r_A, r_A, k), ctx);
+			if (k)
+				emit(ARM_LSR_I(r_A, r_A, k), ctx);
 			break;
 		case BPF_ALU | BPF_RSH | BPF_X:
 			update_on_xread(ctx);

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			322 /* length of syscall table */
+#define NR_syscalls			323 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -335,5 +335,6 @@
 #define __NR_userfaultfd		1343
 #define __NR_membarrier			1344
 #define __NR_kcmp			1345
+#define __NR_mlock2			1346
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1771,5 +1771,6 @@ sys_call_table:
 	data8 sys_userfaultfd
 	data8 sys_membarrier
 	data8 sys_kcmp				// 1345
+	data8 sys_mlock2
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls

arch/m32r/include/asm/Kbuild

@@ -3,6 +3,7 @@ generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += exec.h
 generic-y += irq_work.h
+generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += module.h

arch/m32r/include/asm/io.h

@@ -168,13 +168,21 @@ static inline void _writel(unsigned long l, unsigned long addr)
 #define writew_relaxed writew
 #define writel_relaxed writel
 
-#define ioread8 read
+#define ioread8 readb
 #define ioread16 readw
 #define ioread32 readl
 #define iowrite8 writeb
 #define iowrite16 writew
 #define iowrite32 writel
 
+#define ioread8_rep(p, dst, count) insb((unsigned long)(p), (dst), (count))
+#define ioread16_rep(p, dst, count) insw((unsigned long)(p), (dst), (count))
+#define ioread32_rep(p, dst, count) insl((unsigned long)(p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) outsb((unsigned long)(p), (src), (count))
+#define iowrite16_rep(p, src, count) outsw((unsigned long)(p), (src), (count))
+#define iowrite32_rep(p, src, count) outsl((unsigned long)(p), (src), (count))
+
 #define ioread16be(addr)	be16_to_cpu(readw(addr))
 #define ioread32be(addr)	be32_to_cpu(readl(addr))
 #define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))

arch/microblaze/kernel/dma.c

@@ -61,7 +61,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
-		__dma_sync(sg_phys(sg), sg->length, direction);
+		__dma_sync(page_to_phys(sg_page(sg)) + sg->offset,
+							sg->length, direction);
 	}
 
 	return nents;

arch/mips/include/asm/uaccess.h

@@ -599,7 +599,7 @@ extern void __put_user_unknown(void);
  * On error, the variable @x is set to zero.
  */
 #define __get_user_unaligned(x,ptr) \
-	__get_user__unalignednocheck((x),(ptr),sizeof(*(ptr)))
+	__get_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
 
 /*
  * Yuck.  We need two variants, one for 64bit operation and one
@@ -620,8 +620,8 @@ extern void __get_user_unaligned_unknown(void);
 do {									\
 	switch (size) {							\
 	case 1: __get_data_asm(val, "lb", ptr); break;			\
-	case 2: __get_user_unaligned_asm(val, "ulh", ptr); break;	\
-	case 4: __get_user_unaligned_asm(val, "ulw", ptr); break;	\
+	case 2: __get_data_unaligned_asm(val, "ulh", ptr); break;	\
+	case 4: __get_data_unaligned_asm(val, "ulw", ptr); break;	\
 	case 8: __GET_USER_UNALIGNED_DW(val, ptr); break;		\
 	default: __get_user_unaligned_unknown(); break;			\
 	}								\
@@ -1122,9 +1122,15 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	might_fault();							\
-	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
-					   __cu_len);			\
+	if (eva_kernel_access()) {					\
+		__cu_len = __invoke_copy_from_kernel(__cu_to,		\
+						     __cu_from,		\
+						     __cu_len);		\
+	} else {							\
+		might_fault();						\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+						   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -1229,16 +1235,28 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, $0\n\t"
-		"move\t$6, %2\n\t"
-		__MODULE_JAL(__bzero)
-		"move\t%0, $6"
-		: "=r" (res)
-		: "r" (addr), "r" (size)
-		: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	if (eva_kernel_access()) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, $0\n\t"
+			"move\t$6, %2\n\t"
+			__MODULE_JAL(__bzero_kernel)
+			"move\t%0, $6"
+			: "=r" (res)
+			: "r" (addr), "r" (size)
+			: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, $0\n\t"
+			"move\t$6, %2\n\t"
+			__MODULE_JAL(__bzero)
+			"move\t%0, $6"
+			: "=r" (res)
+			: "r" (addr), "r" (size)
+			: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	}
 
 	return res;
 }
@@ -1384,7 +1402,7 @@ static inline long strlen_user(const char __user *s)
 		might_fault();
 		__asm__ __volatile__(
 			"move\t$4, %1\n\t"
-			__MODULE_JAL(__strlen_kernel_asm)
+			__MODULE_JAL(__strlen_user_asm)
 			"move\t%0, $2"
 			: "=r" (res)
 			: "r" (s)

arch/mips/kernel/cps-vec.S

@@ -257,7 +257,6 @@ LEAF(mips_cps_core_init)
 	has_mt	t0, 3f
 
 	.set	push
-	.set	mips64r2
 	.set	mt
 
 	/* Only allow 1 TC per VPE to execute... */
@@ -376,7 +375,6 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 
 	.set	push
-	.set	mips64r2
 	.set	mt
 
 1:	/* Enter VPE configuration state */

arch/mips/kernel/mips_ksyms.c

@@ -17,6 +17,7 @@
 #include <asm/fpu.h>
 #include <asm/msa.h>
 
+extern void *__bzero_kernel(void *__s, size_t __count);
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_kernel_nocheck_asm(char *__to,
 					      const char *__from, long __len);
@@ -64,6 +65,7 @@ EXPORT_SYMBOL(__copy_from_user_eva);
 EXPORT_SYMBOL(__copy_in_user_eva);
 EXPORT_SYMBOL(__copy_to_user_eva);
 EXPORT_SYMBOL(__copy_user_inatomic_eva);
+EXPORT_SYMBOL(__bzero_kernel);
 #endif
 EXPORT_SYMBOL(__bzero);
 EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm);

arch/mips/lib/memset.S

@@ -283,6 +283,8 @@ LEAF(memset)
 1:
 #ifndef CONFIG_EVA
 FEXPORT(__bzero)
+#else
+FEXPORT(__bzero_kernel)
 #endif
 	__BUILD_BZERO LEGACY_MODE
 

arch/mips/net/bpf_jit.c

@@ -521,19 +521,6 @@ static inline u16 align_sp(unsigned int num)
 	return num;
 }
 
-static bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		return true;
-	default:
-		return false;
-	}
-}
-
 static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
 {
 	int i = 0, real_off = 0;
@@ -614,7 +601,6 @@ static unsigned int get_stack_depth(struct jit_ctx *ctx)
 
 static void build_prologue(struct jit_ctx *ctx)
 {
-	u16 first_inst = ctx->skf->insns[0].code;
 	int sp_off;
 
 	/* Calculate the total offset for the stack pointer */
@@ -641,7 +627,7 @@ static void build_prologue(struct jit_ctx *ctx)
 		emit_jit_reg_move(r_X, r_zero, ctx);
 
 	/* Do not leak kernel data to userspace */
-	if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
 		emit_jit_reg_move(r_A, r_zero, ctx);
 }
 

arch/mips/pci/pci-rt2880.c

@@ -221,7 +221,6 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 static int rt288x_pci_probe(struct platform_device *pdev)
 {
 	void __iomem *io_map_base;
-	int i;
 
 	rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
 

arch/mips/pmcs-msp71xx/msp_setup.c

@@ -39,7 +39,6 @@ extern void msp_serial_setup(void);
 void msp7120_reset(void)
 {
 	void *start, *end, *iptr;
-	register int i;
 
 	/* Diasble all interrupts */
 	local_irq_disable();

arch/mips/sni/reset.c

@@ -26,7 +26,7 @@ static inline void kb_wait(void)
 /* XXX This ends up at the ARC firmware prompt ...  */
 void sni_machine_restart(char *command)
 {
-	int i, j;
+	int i;
 
 	/* This does a normal via the keyboard controller like a PC.
 	   We can do that easier ...  */

arch/mips/vdso/Makefile

@@ -26,8 +26,8 @@ aflags-vdso := $(ccflags-vdso) \
 # the comments on that file.
 #
 ifndef CONFIG_CPU_MIPSR6
-  ifeq ($(call ld-ifversion, -gt, 22400000, y),)
-    $(warning MIPS VDSO requires binutils > 2.24)
+  ifeq ($(call ld-ifversion, -lt, 22500000, y),y)
+    $(warning MIPS VDSO requires binutils >= 2.25)
     obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y))
     ccflags-vdso += -DDISABLE_MIPS_VDSO
   endif

arch/parisc/kernel/signal.c

@@ -435,6 +435,55 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall)
 		regs->gr[28]);
 }
 
+/*
+ * Check how the syscall number gets loaded into %r20 within
+ * the delay branch in userspace and adjust as needed.
+ */
+
+static void check_syscallno_in_delay_branch(struct pt_regs *regs)
+{
+	u32 opcode, source_reg;
+	u32 __user *uaddr;
+	int err;
+
+	/* Usually we don't have to restore %r20 (the system call number)
+	 * because it gets loaded in the delay slot of the branch external
+	 * instruction via the ldi instruction.
+	 * In some cases a register-to-register copy instruction might have
+	 * been used instead, in which case we need to copy the syscall
+	 * number into the source register before returning to userspace.
+	 */
+
+	/* A syscall is just a branch, so all we have to do is fiddle the
+	 * return pointer so that the ble instruction gets executed again.
+	 */
+	regs->gr[31] -= 8; /* delayed branching */
+
+	/* Get assembler opcode of code in delay branch */
+	uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4);
+	err = get_user(opcode, uaddr);
+	if (err)
+		return;
+
+	/* Check if delay branch uses "ldi int,%r20" */
+	if ((opcode & 0xffff0000) == 0x34140000)
+		return;	/* everything ok, just return */
+
+	/* Check if delay branch uses "nop" */
+	if (opcode == INSN_NOP)
+		return;
+
+	/* Check if delay branch uses "copy %rX,%r20" */
+	if ((opcode & 0xffe0ffff) == 0x08000254) {
+		source_reg = (opcode >> 16) & 31;
+		regs->gr[source_reg] = regs->gr[20];
+		return;
+	}
+
+	pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n",
+		current->comm, task_pid_nr(current), opcode);
+}
+
 static inline void
 syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 {
@@ -457,10 +506,7 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 		}
 		/* fallthrough */
 	case -ERESTARTNOINTR:
-		/* A syscall is just a branch, so all
-		 * we have to do is fiddle the return pointer.
-		 */
-		regs->gr[31] -= 8; /* delayed branching */
+		check_syscallno_in_delay_branch(regs);
 		break;
 	}
 }
@@ -510,15 +556,9 @@ insert_restart_trampoline(struct pt_regs *regs)
 	}
 	case -ERESTARTNOHAND:
 	case -ERESTARTSYS:
-	case -ERESTARTNOINTR: {
-		/* Hooray for delayed branching.  We don't
-		 * have to restore %r20 (the system call
-		 * number) because it gets loaded in the delay
-		 * slot of the branch external instruction.
-		 */
-		regs->gr[31] -= 8;
+	case -ERESTARTNOINTR:
+		check_syscallno_in_delay_branch(regs);
 		return;
-	}
 	default:
 		break;
 	}

arch/powerpc/include/asm/systbl.h

@@ -370,16 +370,16 @@ COMPAT_SYS(execveat)
 PPC64ONLY(switch_endian)
 SYSCALL_SPU(userfaultfd)
 SYSCALL_SPU(membarrier)
-SYSCALL(semop)
-SYSCALL(semget)
-COMPAT_SYS(semctl)
-COMPAT_SYS(semtimedop)
-COMPAT_SYS(msgsnd)
-COMPAT_SYS(msgrcv)
-SYSCALL(msgget)
-COMPAT_SYS(msgctl)
-COMPAT_SYS(shmat)
-SYSCALL(shmdt)
-SYSCALL(shmget)
-COMPAT_SYS(shmctl)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
 SYSCALL(mlock2)

arch/powerpc/include/uapi/asm/unistd.h

@@ -388,18 +388,6 @@
 #define __NR_switch_endian	363
 #define __NR_userfaultfd	364
 #define __NR_membarrier		365
-#define __NR_semop		366
-#define __NR_semget		367
-#define __NR_semctl		368
-#define __NR_semtimedop		369
-#define __NR_msgsnd		370
-#define __NR_msgrcv		371
-#define __NR_msgget		372
-#define __NR_msgctl		373
-#define __NR_shmat		374
-#define __NR_shmdt		375
-#define __NR_shmget		376
-#define __NR_shmctl		377
 #define __NR_mlock2		378
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kvm/book3s_hv.c

@@ -224,6 +224,12 @@ static void kvmppc_core_vcpu_put_hv(struct kvm_vcpu *vcpu)
 
 static void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr)
 {
+	/*
+	 * Check for illegal transactional state bit combination
+	 * and if we find it, force the TS field to a safe state.
+	 */
+	if ((msr & MSR_TS_MASK) == MSR_TS_MASK)
+		msr &= ~MSR_TS_MASK;
 	vcpu->arch.shregs.msr = msr;
 	kvmppc_end_cede(vcpu);
 }

arch/powerpc/net/bpf_jit_comp.c

@@ -78,18 +78,9 @@ static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image,
 		PPC_LI(r_X, 0);
 	}
 
-	switch (filter[0].code) {
-	case BPF_RET | BPF_K:
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		/* first instruction sets A register (or is RET 'constant') */
-		break;
-	default:
-		/* make sure we dont leak kernel information to user */
+	/* make sure we dont leak kernel information to user */
+	if (bpf_needs_clear_a(&filter[0]))
 		PPC_LI(r_A, 0);
-	}
 }
 
 static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)

arch/powerpc/platforms/powernv/opal-irqchip.c

@@ -83,7 +83,19 @@ static void opal_event_unmask(struct irq_data *d)
 	set_bit(d->hwirq, &opal_event_irqchip.mask);
 
 	opal_poll_events(&events);
-	opal_handle_events(be64_to_cpu(events));
+	last_outstanding_events = be64_to_cpu(events);
+
+	/*
+	 * We can't just handle the events now with opal_handle_events().
+	 * If we did we would deadlock when opal_event_unmask() is called from
+	 * handle_level_irq() with the irq descriptor lock held, because
+	 * calling opal_handle_events() would call generic_handle_irq() and
+	 * then handle_level_irq() which would try to take the descriptor lock
+	 * again. Instead queue the events for later.
+	 */
+	if (last_outstanding_events & opal_event_irqchip.mask)
+		/* Need to retrigger the interrupt */
+		irq_work_queue(&opal_event_irq_work);
 }
 
 static int opal_event_set_type(struct irq_data *d, unsigned int flow_type)

arch/powerpc/platforms/powernv/opal.c

@@ -278,7 +278,7 @@ static void opal_handle_message(void)
 
 	/* Sanity check */
 	if (type >= OPAL_MSG_TYPE_MAX) {
-		pr_warning("%s: Unknown message type: %u\n", __func__, type);
+		pr_warn_once("%s: Unknown message type: %u\n", __func__, type);
 		return;
 	}
 	opal_message_do_notify(type, (void *)&msg);

arch/s390/kernel/dis.c

@@ -1920,16 +1920,23 @@ static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
 			}
 			if (separator)
 				ptr += sprintf(ptr, "%c", separator);
+			/*
+			 * Use four '%' characters below because of the
+			 * following two conversions:
+			 *
+			 *  1) sprintf: %%%%r -> %%r
+			 *  2) printk : %%r   -> %r
+			 */
 			if (operand->flags & OPERAND_GPR)
-				ptr += sprintf(ptr, "%%r%i", value);
+				ptr += sprintf(ptr, "%%%%r%i", value);
 			else if (operand->flags & OPERAND_FPR)
-				ptr += sprintf(ptr, "%%f%i", value);
+				ptr += sprintf(ptr, "%%%%f%i", value);
 			else if (operand->flags & OPERAND_AR)
-				ptr += sprintf(ptr, "%%a%i", value);
+				ptr += sprintf(ptr, "%%%%a%i", value);
 			else if (operand->flags & OPERAND_CR)
-				ptr += sprintf(ptr, "%%c%i", value);
+				ptr += sprintf(ptr, "%%%%c%i", value);
 			else if (operand->flags & OPERAND_VR)
-				ptr += sprintf(ptr, "%%v%i", value);
+				ptr += sprintf(ptr, "%%%%v%i", value);
 			else if (operand->flags & OPERAND_PCREL)
 				ptr += sprintf(ptr, "%lx", (signed int) value
 								      + addr);

arch/sparc/include/asm/elf_64.h

@@ -95,6 +95,7 @@
  * really available.  So we simply advertise only "crypto" support.
  */
 #define HWCAP_SPARC_CRYPTO	0x04000000 /* CRYPTO insns available */
+#define HWCAP_SPARC_ADI		0x08000000 /* ADI available */
 
 #define CORE_DUMP_USE_REGSET
 

arch/sparc/include/uapi/asm/unistd.h

@@ -417,8 +417,13 @@
 #define __NR_bpf		349
 #define __NR_execveat		350
 #define __NR_membarrier		351
+#define __NR_userfaultfd	352
+#define __NR_bind		353
+#define __NR_listen		354
+#define __NR_setsockopt		355
+#define __NR_mlock2		356
 
-#define NR_syscalls		352
+#define NR_syscalls		357
 
 /* Bitmask values returned from kern_features system call.  */
 #define KERN_FEATURE_MIXED_MODE_STACK	0x00000001

arch/sparc/kernel/head_64.S

@@ -946,6 +946,12 @@ ENTRY(__retl_one)
 	 mov	1, %o0
 ENDPROC(__retl_one)
 
+ENTRY(__retl_one_fp)
+	VISExitHalf
+	retl
+	 mov	1, %o0
+ENDPROC(__retl_one_fp)
+
 ENTRY(__ret_one_asi)
 	wr	%g0, ASI_AIUS, %asi
 	ret
@@ -958,6 +964,13 @@ ENTRY(__retl_one_asi)
 	 mov	1, %o0
 ENDPROC(__retl_one_asi)
 
+ENTRY(__retl_one_asi_fp)
+	wr	%g0, ASI_AIUS, %asi
+	VISExitHalf
+	retl
+	 mov	1, %o0
+ENDPROC(__retl_one_asi_fp)
+
 ENTRY(__retl_o1)
 	retl
 	 mov	%o1, %o0

arch/sparc/kernel/perf_event.c

@@ -1828,11 +1828,18 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry,
 void
 perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 {
+	u64 saved_fault_address = current_thread_info()->fault_address;
+	u8 saved_fault_code = get_thread_fault_code();
+	mm_segment_t old_fs;
+
 	perf_callchain_store(entry, regs->tpc);
 
 	if (!current->mm)
 		return;
 
+	old_fs = get_fs();
+	set_fs(USER_DS);
+
 	flushw_user();
 
 	pagefault_disable();
@@ -1843,4 +1850,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 		perf_callchain_user_64(entry, regs);
 
 	pagefault_enable();
+
+	set_fs(old_fs);
+	set_thread_fault_code(saved_fault_code);
+	current_thread_info()->fault_address = saved_fault_address;
 }

arch/sparc/kernel/rtrap_64.S

@@ -73,7 +73,13 @@ rtrap_nmi:	ldx			[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 		andn			%l1, %l4, %l1
 		srl			%l4, 20, %l4
 		ba,pt			%xcc, rtrap_no_irq_enable
-		 wrpr			%l4, %pil
+		nop
+		/* Do not actually set the %pil here.  We will do that
+		 * below after we clear PSTATE_IE in the %pstate register.
+		 * If we re-enable interrupts here, we can recurse down
+		 * the hardirq stack potentially endlessly, causing a
+		 * stack overflow.
+		 */
 
 		.align			64
 		.globl			rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall

arch/sparc/kernel/setup_64.c

@@ -380,7 +380,8 @@ static const char *hwcaps[] = {
 	 */
 	"mul32", "div32", "fsmuld", "v8plus", "popc", "vis", "vis2",
 	"ASIBlkInit", "fmaf", "vis3", "hpc", "random", "trans", "fjfmau",
-	"ima", "cspare", "pause", "cbcond",
+	"ima", "cspare", "pause", "cbcond", NULL /*reserved for crypto */,
+	"adp",
 };
 
 static const char *crypto_hwcaps[] = {
@@ -396,7 +397,7 @@ void cpucap_info(struct seq_file *m)
 	seq_puts(m, "cpucaps\t\t: ");
 	for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 		unsigned long bit = 1UL << i;
-		if (caps & bit) {
+		if (hwcaps[i] && (caps & bit)) {
 			seq_printf(m, "%s%s",
 				   printed ? "," : "", hwcaps[i]);
 			printed++;
@@ -450,7 +451,7 @@ static void __init report_hwcaps(unsigned long caps)
 
 	for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 		unsigned long bit = 1UL << i;
-		if (caps & bit)
+		if (hwcaps[i] && (caps & bit))
 			report_one_hwcap(&printed, hwcaps[i]);
 	}
 	if (caps & HWCAP_SPARC_CRYPTO)
@@ -485,7 +486,7 @@ static unsigned long __init mdesc_cpu_hwcap_list(void)
 		for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 			unsigned long bit = 1UL << i;
 
-			if (!strcmp(prop, hwcaps[i])) {
+			if (hwcaps[i] && !strcmp(prop, hwcaps[i])) {
 				caps |= bit;
 				break;
 			}

arch/sparc/kernel/systbls_32.S

@@ -35,18 +35,18 @@ sys_call_table:
 /*80*/	.long sys_setgroups16, sys_getpgrp, sys_setgroups, sys_setitimer, sys_ftruncate64
 /*85*/	.long sys_swapon, sys_getitimer, sys_setuid, sys_sethostname, sys_setgid
 /*90*/	.long sys_dup2, sys_setfsuid, sys_fcntl, sys_select, sys_setfsgid
-/*95*/	.long sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
+/*95*/	.long sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept
 /*100*/	.long sys_getpriority, sys_rt_sigreturn, sys_rt_sigaction, sys_rt_sigprocmask, sys_rt_sigpending
 /*105*/	.long sys_rt_sigtimedwait, sys_rt_sigqueueinfo, sys_rt_sigsuspend, sys_setresuid, sys_getresuid
-/*110*/	.long sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
-/*115*/	.long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_nis_syscall, sys_getcwd
+/*110*/	.long sys_setresgid, sys_getresgid, sys_setregid, sys_recvmsg, sys_sendmsg
+/*115*/	.long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_getsockopt, sys_getcwd
 /*120*/	.long sys_readv, sys_writev, sys_settimeofday, sys_fchown16, sys_fchmod
-/*125*/	.long sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/	.long sys_ftruncate, sys_flock, sys_lstat64, sys_nis_syscall, sys_nis_syscall
-/*135*/	.long sys_nis_syscall, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64
-/*140*/	.long sys_sendfile64, sys_nis_syscall, sys_futex, sys_gettid, sys_getrlimit
+/*125*/	.long sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
+/*130*/	.long sys_ftruncate, sys_flock, sys_lstat64, sys_sendto, sys_shutdown
+/*135*/	.long sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64
+/*140*/	.long sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit
 /*145*/	.long sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write
-/*150*/	.long sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
+/*150*/	.long sys_getsockname, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
 /*155*/	.long sys_fcntl64, sys_inotify_rm_watch, sys_statfs, sys_fstatfs, sys_oldumount
 /*160*/	.long sys_sched_setaffinity, sys_sched_getaffinity, sys_getdomainname, sys_setdomainname, sys_nis_syscall
 /*165*/	.long sys_quotactl, sys_set_tid_address, sys_mount, sys_ustat, sys_setxattr
@@ -87,4 +87,5 @@ sys_call_table:
 /*335*/	.long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
 /*340*/	.long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 /*345*/	.long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
-/*350*/	.long sys_execveat, sys_membarrier
+/*350*/	.long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
+/*355*/	.long sys_setsockopt, sys_mlock2

arch/sparc/kernel/systbls_64.S

@@ -37,15 +37,15 @@ sys_call_table32:
 /*80*/	.word sys_setgroups16, sys_getpgrp, sys_setgroups, compat_sys_setitimer, sys32_ftruncate64
 	.word sys_swapon, compat_sys_getitimer, sys_setuid, sys_sethostname, sys_setgid
 /*90*/	.word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid
-	.word sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
+	.word sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept
 /*100*/ .word sys_getpriority, sys32_rt_sigreturn, compat_sys_rt_sigaction, compat_sys_rt_sigprocmask, compat_sys_rt_sigpending
 	.word compat_sys_rt_sigtimedwait, compat_sys_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid
-/*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
-	.word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, sys_nis_syscall, sys_getcwd
+/*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, compat_sys_recvmsg, compat_sys_sendmsg
+	.word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, compat_sys_getsockopt, sys_getcwd
 /*120*/	.word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate
-/*130*/	.word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
-	.word sys_nis_syscall, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
+	.word sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate
+/*130*/	.word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_sendto, sys_shutdown
+	.word sys_socketpair, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
 	.word compat_sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write
 /*150*/	.word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
@@ -88,7 +88,8 @@ sys_call_table32:
 	.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
 /*340*/	.word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 	.word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
-/*350*/	.word sys32_execveat, sys_membarrier
+/*350*/	.word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
+	.word compat_sys_setsockopt, sys_mlock2
 
 #endif /* CONFIG_COMPAT */
 
@@ -168,4 +169,5 @@ sys_call_table:
 	.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
 /*340*/	.word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 	.word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
-/*350*/	.word sys64_execveat, sys_membarrier
+/*350*/	.word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
+	.word sys_setsockopt, sys_mlock2

arch/sparc/lib/NG2copy_from_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif

arch/sparc/lib/NG2copy_to_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif

arch/sparc/lib/NG2memcpy.S

@@ -34,10 +34,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -134,40 +140,40 @@
 	fsrc2		%x6, %f12; \
 	fsrc2		%x7, %f14;
 #define FREG_LOAD_1(base, x0) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0))
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0))
 #define FREG_LOAD_2(base, x0, x1) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1));
 #define FREG_LOAD_3(base, x0, x1, x2) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2));
 #define FREG_LOAD_4(base, x0, x1, x2, x3) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3));
 #define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
-	EX_LD(LOAD(ldd, base + 0x20, %x4));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD_FP(LOAD(ldd, base + 0x20, %x4));
 #define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
-	EX_LD(LOAD(ldd, base + 0x20, %x4)); \
-	EX_LD(LOAD(ldd, base + 0x28, %x5));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \
+	EX_LD_FP(LOAD(ldd, base + 0x28, %x5));
 #define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
-	EX_LD(LOAD(ldd, base + 0x20, %x4)); \
-	EX_LD(LOAD(ldd, base + 0x28, %x5)); \
-	EX_LD(LOAD(ldd, base + 0x30, %x6));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \
+	EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); \
+	EX_LD_FP(LOAD(ldd, base + 0x30, %x6));
 
 	.register	%g2,#scratch
 	.register	%g3,#scratch
@@ -275,11 +281,11 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 nop
 	/* fall through for 0 < low bits < 8 */
 110:	sub		%o4, 64, %g2
-	EX_LD(LOAD_BLK(%g2, %f0))
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+	EX_LD_FP(LOAD_BLK(%g2, %f0))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -290,10 +296,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 120:	sub		%o4, 56, %g2
 	FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -304,10 +310,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 130:	sub		%o4, 48, %g2
 	FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_6(f20, f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -318,10 +324,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 140:	sub		%o4, 40, %g2
 	FREG_LOAD_5(%g2, f0, f2, f4, f6, f8)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_5(f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -332,10 +338,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 150:	sub		%o4, 32, %g2
 	FREG_LOAD_4(%g2, f0, f2, f4, f6)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_4(f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -346,10 +352,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 160:	sub		%o4, 24, %g2
 	FREG_LOAD_3(%g2, f0, f2, f4)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_3(f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -360,10 +366,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 170:	sub		%o4, 16, %g2
 	FREG_LOAD_2(%g2, f0, f2)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_2(f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -374,10 +380,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 180:	sub		%o4, 8, %g2
 	FREG_LOAD_1(%g2, f0)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_1(f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -387,10 +393,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 nop
 
 190:
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
 	subcc		%g1, 64, %g1
-	EX_LD(LOAD_BLK(%o4, %f0))
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f0))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	add		%o4, 64, %o4
 	bne,pt		%xcc, 1b
 	 LOAD(prefetch, %o4 + 64, #one_read)

arch/sparc/lib/NG4copy_from_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif

arch/sparc/lib/NG4copy_to_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif

arch/sparc/lib/NG4memcpy.S

@@ -48,10 +48,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -210,17 +216,17 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	sub		%o2, %o4, %o2
 	alignaddr	%o1, %g0, %g1
 	add		%o1, %o4, %o1
-	EX_LD(LOAD(ldd, %g1 + 0x00, %f0))
-1:	EX_LD(LOAD(ldd, %g1 + 0x08, %f2))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0))
+1:	EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2))
 	subcc		%o4, 0x40, %o4
-	EX_LD(LOAD(ldd, %g1 + 0x10, %f4))
-	EX_LD(LOAD(ldd, %g1 + 0x18, %f6))
-	EX_LD(LOAD(ldd, %g1 + 0x20, %f8))
-	EX_LD(LOAD(ldd, %g1 + 0x28, %f10))
-	EX_LD(LOAD(ldd, %g1 + 0x30, %f12))
-	EX_LD(LOAD(ldd, %g1 + 0x38, %f14))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14))
 	faligndata	%f0, %f2, %f16
-	EX_LD(LOAD(ldd, %g1 + 0x40, %f0))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0))
 	faligndata	%f2, %f4, %f18
 	add		%g1, 0x40, %g1
 	faligndata	%f4, %f6, %f20
@@ -229,14 +235,14 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	faligndata	%f10, %f12, %f26
 	faligndata	%f12, %f14, %f28
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE(std, %f16, %o0 + 0x00))
-	EX_ST(STORE(std, %f18, %o0 + 0x08))
-	EX_ST(STORE(std, %f20, %o0 + 0x10))
-	EX_ST(STORE(std, %f22, %o0 + 0x18))
-	EX_ST(STORE(std, %f24, %o0 + 0x20))
-	EX_ST(STORE(std, %f26, %o0 + 0x28))
-	EX_ST(STORE(std, %f28, %o0 + 0x30))
-	EX_ST(STORE(std, %f30, %o0 + 0x38))
+	EX_ST_FP(STORE(std, %f16, %o0 + 0x00))
+	EX_ST_FP(STORE(std, %f18, %o0 + 0x08))
+	EX_ST_FP(STORE(std, %f20, %o0 + 0x10))
+	EX_ST_FP(STORE(std, %f22, %o0 + 0x18))
+	EX_ST_FP(STORE(std, %f24, %o0 + 0x20))
+	EX_ST_FP(STORE(std, %f26, %o0 + 0x28))
+	EX_ST_FP(STORE(std, %f28, %o0 + 0x30))
+	EX_ST_FP(STORE(std, %f30, %o0 + 0x38))
 	add		%o0, 0x40, %o0
 	bne,pt		%icc, 1b
 	 LOAD(prefetch, %g1 + 0x200, #n_reads_strong)

arch/sparc/lib/U1copy_from_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		___copy_from_user
 #define LOAD(type,addr,dest)	type##a [addr] %asi, dest
 #define LOAD_BLK(addr,dest)	ldda [addr] ASI_BLK_AIUS, dest

arch/sparc/lib/U1copy_to_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		___copy_to_user
 #define STORE(type,src,addr)	type##a src, [addr] ASI_AIUS
 #define STORE_BLK(src,addr)	stda src, [addr] ASI_BLK_AIUS

arch/sparc/lib/U1memcpy.S

@@ -25,10 +25,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -73,8 +79,8 @@
 	faligndata		%f8, %f9, %f62;
 
 #define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, len, jmptgt)	\
-	EX_LD(LOAD_BLK(%src, %fdest));				\
-	EX_ST(STORE_BLK(%fsrc, %dest));				\
+	EX_LD_FP(LOAD_BLK(%src, %fdest));				\
+	EX_ST_FP(STORE_BLK(%fsrc, %dest));				\
 	add			%src, 0x40, %src;		\
 	subcc			%len, 0x40, %len;		\
 	be,pn			%xcc, jmptgt;			\
@@ -89,12 +95,12 @@
 
 #define DO_SYNC			membar	#Sync;
 #define STORE_SYNC(dest, fsrc)				\
-	EX_ST(STORE_BLK(%fsrc, %dest));			\
+	EX_ST_FP(STORE_BLK(%fsrc, %dest));			\
 	add			%dest, 0x40, %dest;	\
 	DO_SYNC
 
 #define STORE_JUMP(dest, fsrc, target)			\
-	EX_ST(STORE_BLK(%fsrc, %dest));			\
+	EX_ST_FP(STORE_BLK(%fsrc, %dest));			\
 	add			%dest, 0x40, %dest;	\
 	ba,pt			%xcc, target;		\
 	 nop;
@@ -103,7 +109,7 @@
 	subcc			%left, 8, %left;\
 	bl,pn			%xcc, 95f;	\
 	 faligndata		%f0, %f1, %f48;	\
-	EX_ST(STORE(std, %f48, %dest));		\
+	EX_ST_FP(STORE(std, %f48, %dest));		\
 	add			%dest, 8, %dest;
 
 #define UNEVEN_VISCHUNK_LAST(dest, f0, f1, left)	\
@@ -160,8 +166,8 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 	 and		%g2, 0x38, %g2
 
 1:	subcc		%g1, 0x1, %g1
-	EX_LD(LOAD(ldub, %o1 + 0x00, %o3))
-	EX_ST(STORE(stb, %o3, %o1 + %GLOBAL_SPARE))
+	EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3))
+	EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE))
 	bgu,pt		%XCC, 1b
 	 add		%o1, 0x1, %o1
 
@@ -172,20 +178,20 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 	be,pt		%icc, 3f
 	 alignaddr	%o1, %g0, %o1
 
-	EX_LD(LOAD(ldd, %o1, %f4))
-1:	EX_LD(LOAD(ldd, %o1 + 0x8, %f6))
+	EX_LD_FP(LOAD(ldd, %o1, %f4))
+1:	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f4, %f6, %f0
-	EX_ST(STORE(std, %f0, %o0))
+	EX_ST_FP(STORE(std, %f0, %o0))
 	be,pn		%icc, 3f
 	 add		%o0, 0x8, %o0
 
-	EX_LD(LOAD(ldd, %o1 + 0x8, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f6, %f4, %f0
-	EX_ST(STORE(std, %f0, %o0))
+	EX_ST_FP(STORE(std, %f0, %o0))
 	bne,pt		%icc, 1b
 	 add		%o0, 0x8, %o0
 
@@ -208,13 +214,13 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 	add		%g1, %GLOBAL_SPARE, %g1
 	subcc		%o2, %g3, %o2
 
-	EX_LD(LOAD_BLK(%o1, %f0))
+	EX_LD_FP(LOAD_BLK(%o1, %f0))
 	add		%o1, 0x40, %o1
 	add		%g1, %g3, %g1
-	EX_LD(LOAD_BLK(%o1, %f16))
+	EX_LD_FP(LOAD_BLK(%o1, %f16))
 	add		%o1, 0x40, %o1
 	sub		%GLOBAL_SPARE, 0x80, %GLOBAL_SPARE
-	EX_LD(LOAD_BLK(%o1, %f32))
+	EX_LD_FP(LOAD_BLK(%o1, %f32))
 	add		%o1, 0x40, %o1
 
 	/* There are 8 instances of the unrolled loop,
@@ -426,28 +432,28 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 62:	FINISH_VISCHUNK(o0, f44, f46, g3)
 63:	UNEVEN_VISCHUNK_LAST(o0, f46, f0,  g3)
 
-93:	EX_LD(LOAD(ldd, %o1, %f2))
+93:	EX_LD_FP(LOAD(ldd, %o1, %f2))
 	add		%o1, 8, %o1
 	subcc		%g3, 8, %g3
 	faligndata	%f0, %f2, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	bl,pn		%xcc, 95f
 	 add		%o0, 8, %o0
-	EX_LD(LOAD(ldd, %o1, %f0))
+	EX_LD_FP(LOAD(ldd, %o1, %f0))
 	add		%o1, 8, %o1
 	subcc		%g3, 8, %g3
 	faligndata	%f2, %f0, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	bge,pt		%xcc, 93b
 	 add		%o0, 8, %o0
 
 95:	brz,pt		%o2, 2f
 	 mov		%g1, %o1
 
-1:	EX_LD(LOAD(ldub, %o1, %o3))
+1:	EX_LD_FP(LOAD(ldub, %o1, %o3))
 	add		%o1, 1, %o1
 	subcc		%o2, 1, %o2
-	EX_ST(STORE(stb, %o3, %o0))
+	EX_ST_FP(STORE(stb, %o3, %o0))
 	bne,pt		%xcc, 1b
 	 add		%o0, 1, %o0
 

arch/sparc/lib/U3copy_from_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		U3copy_from_user
 #define LOAD(type,addr,dest)	type##a [addr] %asi, dest
 #define EX_RETVAL(x)		0

arch/sparc/lib/U3copy_to_user.S

@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		U3copy_to_user
 #define STORE(type,src,addr)	type##a src, [addr] ASI_AIUS
 #define STORE_BLK(src,addr)	stda src, [addr] ASI_BLK_AIUS

arch/sparc/lib/U3memcpy.S

@@ -24,10 +24,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -120,8 +126,8 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 and		%g2, 0x38, %g2
 
 1:	subcc		%g1, 0x1, %g1
-	EX_LD(LOAD(ldub, %o1 + 0x00, %o3))
-	EX_ST(STORE(stb, %o3, %o1 + GLOBAL_SPARE))
+	EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3))
+	EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE))
 	bgu,pt		%XCC, 1b
 	 add		%o1, 0x1, %o1
 
@@ -132,20 +138,20 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	be,pt		%icc, 3f
 	 alignaddr	%o1, %g0, %o1
 
-	EX_LD(LOAD(ldd, %o1, %f4))
-1:	EX_LD(LOAD(ldd, %o1 + 0x8, %f6))
+	EX_LD_FP(LOAD(ldd, %o1, %f4))
+1:	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f4, %f6, %f0
-	EX_ST(STORE(std, %f0, %o0))
+	EX_ST_FP(STORE(std, %f0, %o0))
 	be,pn		%icc, 3f
 	 add		%o0, 0x8, %o0
 
-	EX_LD(LOAD(ldd, %o1 + 0x8, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f6, %f4, %f2
-	EX_ST(STORE(std, %f2, %o0))
+	EX_ST_FP(STORE(std, %f2, %o0))
 	bne,pt		%icc, 1b
 	 add		%o0, 0x8, %o0
 
@@ -155,25 +161,25 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	LOAD(prefetch, %o1 + 0x080, #one_read)
 	LOAD(prefetch, %o1 + 0x0c0, #one_read)
 	LOAD(prefetch, %o1 + 0x100, #one_read)
-	EX_LD(LOAD(ldd, %o1 + 0x000, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0))
 	LOAD(prefetch, %o1 + 0x140, #one_read)
-	EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
 	LOAD(prefetch, %o1 + 0x180, #one_read)
-	EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
 	LOAD(prefetch, %o1 + 0x1c0, #one_read)
 	faligndata	%f0, %f2, %f16
-	EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
 	faligndata	%f2, %f4, %f18
-	EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
 	faligndata	%f4, %f6, %f20
-	EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
 	faligndata	%f6, %f8, %f22
 
-	EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
 	faligndata	%f8, %f10, %f24
-	EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
 	faligndata	%f10, %f12, %f26
-	EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
 
 	subcc		GLOBAL_SPARE, 0x80, GLOBAL_SPARE
 	add		%o1, 0x40, %o1
@@ -184,26 +190,26 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 	.align		64
 1:
-	EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
 	faligndata	%f12, %f14, %f28
-	EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE_BLK(%f16, %o0))
-	EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
+	EX_ST_FP(STORE_BLK(%f16, %o0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
 	faligndata	%f0, %f2, %f16
 	add		%o0, 0x40, %o0
 
-	EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
 	faligndata	%f2, %f4, %f18
-	EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
 	faligndata	%f4, %f6, %f20
-	EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
 	subcc		%o3, 0x01, %o3
 	faligndata	%f6, %f8, %f22
-	EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
 
 	faligndata	%f8, %f10, %f24
-	EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
 	LOAD(prefetch, %o1 + 0x1c0, #one_read)
 	faligndata	%f10, %f12, %f26
 	bg,pt		%XCC, 1b
@@ -211,29 +217,29 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 	/* Finally we copy the last full 64-byte block. */
 2:
-	EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
 	faligndata	%f12, %f14, %f28
-	EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE_BLK(%f16, %o0))
-	EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
+	EX_ST_FP(STORE_BLK(%f16, %o0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
 	faligndata	%f0, %f2, %f16
-	EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
 	faligndata	%f2, %f4, %f18
-	EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
 	faligndata	%f4, %f6, %f20
-	EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
 	faligndata	%f6, %f8, %f22
-	EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
 	faligndata	%f8, %f10, %f24
 	cmp		%g1, 0
 	be,pt		%XCC, 1f
 	 add		%o0, 0x40, %o0
-	EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
 1:	faligndata	%f10, %f12, %f26
 	faligndata	%f12, %f14, %f28
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE_BLK(%f16, %o0))
+	EX_ST_FP(STORE_BLK(%f16, %o0))
 	add		%o0, 0x40, %o0
 	add		%o1, 0x40, %o1
 	membar		#Sync
@@ -253,20 +259,20 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 	sub		%o2, %g2, %o2
 	be,a,pt		%XCC, 1f
-	 EX_LD(LOAD(ldd, %o1 + 0x00, %f0))
+	 EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0))
 
-1:	EX_LD(LOAD(ldd, %o1 + 0x08, %f2))
+1:	EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f0, %f2, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	be,pn		%XCC, 2f
 	 add		%o0, 0x8, %o0
-	EX_LD(LOAD(ldd, %o1 + 0x08, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f2, %f0, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	bne,pn		%XCC, 1b
 	 add		%o0, 0x8, %o0
 

arch/sparc/net/bpf_jit_comp.c

@@ -420,22 +420,9 @@ void bpf_jit_compile(struct bpf_prog *fp)
 		}
 		emit_reg_move(O7, r_saved_O7);
 
-		switch (filter[0].code) {
-		case BPF_RET | BPF_K:
-		case BPF_LD | BPF_W | BPF_LEN:
-		case BPF_LD | BPF_W | BPF_ABS:
-		case BPF_LD | BPF_H | BPF_ABS:
-		case BPF_LD | BPF_B | BPF_ABS:
-			/* The first instruction sets the A register (or is
-			 * a "RET 'constant'")
-			 */
-			break;
-		default:
-			/* Make sure we dont leak kernel information to the
-			 * user.
-			 */
+		/* Make sure we dont leak kernel information to the user. */
+		if (bpf_needs_clear_a(&filter[0]))
 			emit_clear(r_A); /* A = 0 */
-		}
 
 		for (i = 0; i < flen; i++) {
 			unsigned int K = filter[i].k;

arch/tile/Kconfig

@@ -176,8 +176,6 @@ config NR_CPUS
 	  smaller kernel memory footprint results from using a smaller
 	  value on chips with fewer tiles.
 
-if TILEGX
-
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_64KB
@@ -188,8 +186,11 @@ choice
 	  connections, etc., it may be better to select 16KB, which uses
 	  memory more efficiently at some cost in TLB performance.
 
-	  Note that this option is TILE-Gx specific; currently
-	  TILEPro page size is set by rebuilding the hypervisor.
+	  Note that for TILEPro, you must also rebuild the hypervisor
+	  with a matching page size.
+
+config PAGE_SIZE_4KB
+	bool "4KB" if TILEPRO
 
 config PAGE_SIZE_16KB
 	bool "16KB"
@@ -199,8 +200,6 @@ config PAGE_SIZE_64KB
 
 endchoice
 
-endif
-
 source "kernel/Kconfig.hz"
 
 config KEXEC

arch/tile/include/asm/page.h

@@ -20,15 +20,17 @@
 #include <arch/chip.h>
 
 /* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
-#if defined(CONFIG_PAGE_SIZE_16KB)
+#if defined(CONFIG_PAGE_SIZE_4KB)  /* tilepro only */
+#define PAGE_SHIFT	12
+#define CTX_PAGE_FLAG	HV_CTX_PG_SM_4K
+#elif defined(CONFIG_PAGE_SIZE_16KB)
 #define PAGE_SHIFT	14
 #define CTX_PAGE_FLAG	HV_CTX_PG_SM_16K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
 #define PAGE_SHIFT	16
 #define CTX_PAGE_FLAG	HV_CTX_PG_SM_64K
 #else
-#define PAGE_SHIFT	HV_LOG2_DEFAULT_PAGE_SIZE_SMALL
-#define CTX_PAGE_FLAG	0
+#error Page size not specified in Kconfig
 #endif
 #define HPAGE_SHIFT	HV_LOG2_DEFAULT_PAGE_SIZE_LARGE