Merge branch 'mlx4_vxlan'

Or Gerlitz says:

====================
Implement vxlan ndo calls

This short series adds support for the vxlan ndo calls, the udp
port is programmed to the firmware using a new command we introduce
here which is called "config device".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -800,16 +800,7 @@ static int mlx4_MAD_IFC_wrapper(struct mlx4_dev *dev, int slave,
 				    vhcr->op, MLX4_CMD_TIME_CLASS_C, MLX4_CMD_NATIVE);
 }
 
-static int MLX4_CMD_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave,
-		     struct mlx4_vhcr *vhcr,
-		     struct mlx4_cmd_mailbox *inbox,
-		     struct mlx4_cmd_mailbox *outbox,
-		     struct mlx4_cmd_info *cmd)
-{
-	return -EPERM;
-}
-
-static int MLX4_CMD_GET_OP_REQ_wrapper(struct mlx4_dev *dev, int slave,
+static int mlx4_CMD_EPERM_wrapper(struct mlx4_dev *dev, int slave,
 		     struct mlx4_vhcr *vhcr,
 		     struct mlx4_cmd_mailbox *inbox,
 		     struct mlx4_cmd_mailbox *outbox,
@@ -963,6 +954,15 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.verify = NULL,
 		.wrapper = NULL
 	},
+	{
+		.opcode = MLX4_CMD_CONFIG_DEV,
+		.has_inbox = false,
+		.has_outbox = false,
+		.out_is_imm = false,
+		.encode_slave_id = false,
+		.verify = NULL,
+		.wrapper = mlx4_CMD_EPERM_wrapper
+	},
 	{
 		.opcode = MLX4_CMD_ALLOC_RES,
 		.has_inbox = false,
@@ -1258,7 +1258,7 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.out_is_imm = false,
 		.encode_slave_id = false,
 		.verify = NULL,
-		.wrapper = MLX4_CMD_UPDATE_QP_wrapper
+		.wrapper = mlx4_CMD_EPERM_wrapper
 	},
 	{
 		.opcode = MLX4_CMD_GET_OP_REQ,
@@ -1267,7 +1267,7 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.out_is_imm = false,
 		.encode_slave_id = false,
 		.verify = NULL,
-		.wrapper = MLX4_CMD_GET_OP_REQ_wrapper,
+		.wrapper = mlx4_CMD_EPERM_wrapper,
 	},
 	{
 		.opcode = MLX4_CMD_CONF_SPECIAL_QP,
@@ -1378,7 +1378,7 @@ static struct mlx4_cmd_info cmd_info[] = {
 		.out_is_imm = false,
 		.encode_slave_id = false,
 		.verify = NULL,
-		.wrapper = mlx4_FLOW_STEERING_IB_UC_QP_RANGE_wrapper
+		.wrapper = mlx4_CMD_EPERM_wrapper
 	},
 };
 

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -39,6 +39,7 @@
 #include <linux/hash.h>
 #include <net/ip.h>
 #include <net/busy_poll.h>
+#include <net/vxlan.h>
 
 #include <linux/mlx4/driver.h>
 #include <linux/mlx4/device.h>
@@ -1665,7 +1666,7 @@ int mlx4_en_start_port(struct net_device *dev)
 	}
 
 	if (mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) {
-		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC);
+		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC, 1);
 		if (err) {
 			en_err(priv, "Failed setting port L2 tunnel configuration, err %d\n",
 			       err);
@@ -1697,6 +1698,8 @@ int mlx4_en_start_port(struct net_device *dev)
 
 	mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap);
 
+	if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)
+		vxlan_get_rx_port(dev);
 	priv->port_up = true;
 	netif_tx_start_all_queues(dev);
 	netif_device_attach(dev);
@@ -2264,6 +2267,81 @@ static int mlx4_en_get_phys_port_id(struct net_device *dev,
 	return 0;
 }
 
+static void mlx4_en_add_vxlan_offloads(struct work_struct *work)
+{
+	int ret;
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 vxlan_add_task);
+
+	ret = mlx4_config_vxlan_port(priv->mdev->dev, priv->vxlan_port);
+	if (ret)
+		goto out;
+
+	ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
+				  VXLAN_STEER_BY_OUTER_MAC, 1);
+out:
+	if (ret)
+		en_err(priv, "failed setting L2 tunnel configuration ret %d\n", ret);
+}
+
+static void mlx4_en_del_vxlan_offloads(struct work_struct *work)
+{
+	int ret;
+	struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
+						 vxlan_del_task);
+
+	ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
+				  VXLAN_STEER_BY_OUTER_MAC, 0);
+	if (ret)
+		en_err(priv, "failed setting L2 tunnel configuration ret %d\n", ret);
+
+	priv->vxlan_port = 0;
+}
+
+static void mlx4_en_add_vxlan_port(struct  net_device *dev,
+				   sa_family_t sa_family, __be16 port)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	__be16 current_port;
+
+	if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS))
+		return;
+
+	if (sa_family == AF_INET6)
+		return;
+
+	current_port = priv->vxlan_port;
+	if (current_port && current_port != port) {
+		en_warn(priv, "vxlan port %d configured, can't add port %d\n",
+			ntohs(current_port), ntohs(port));
+		return;
+	}
+
+	priv->vxlan_port = port;
+	queue_work(priv->mdev->workqueue, &priv->vxlan_add_task);
+}
+
+static void mlx4_en_del_vxlan_port(struct  net_device *dev,
+				   sa_family_t sa_family, __be16 port)
+{
+	struct mlx4_en_priv *priv = netdev_priv(dev);
+	__be16 current_port;
+
+	if (priv->mdev->dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
+		return;
+
+	if (sa_family == AF_INET6)
+		return;
+
+	current_port = priv->vxlan_port;
+	if (current_port != port) {
+		en_dbg(DRV, priv, "vxlan port %d isn't configured, ignoring\n", ntohs(port));
+		return;
+	}
+
+	queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
+}
+
 static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_open		= mlx4_en_open,
 	.ndo_stop		= mlx4_en_close,
@@ -2290,6 +2368,8 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_busy_poll		= mlx4_en_low_latency_recv,
 #endif
 	.ndo_get_phys_port_id	= mlx4_en_get_phys_port_id,
+	.ndo_add_vxlan_port	= mlx4_en_add_vxlan_port,
+	.ndo_del_vxlan_port	= mlx4_en_del_vxlan_port,
 };
 
 static const struct net_device_ops mlx4_netdev_ops_master = {
@@ -2381,6 +2461,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
 	INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
 	INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
+	INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
+	INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
 #ifdef CONFIG_MLX4_EN_DCB
 	if (!mlx4_is_slave(priv->mdev->dev)) {
 		if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_SET_ETH_SCHED) {
@@ -2514,7 +2596,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	}
 
 	if (mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) {
-		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC);
+		err = mlx4_SET_PORT_VXLAN(mdev->dev, priv->port, VXLAN_STEER_BY_OUTER_MAC, 1);
 		if (err) {
 			en_err(priv, "Failed setting port L2 tunnel configuration, err %d\n",
 			       err);

drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -1779,6 +1779,46 @@ int mlx4_CLOSE_HCA(struct mlx4_dev *dev, int panic)
 			MLX4_CMD_NATIVE);
 }
 
+struct mlx4_config_dev {
+	__be32	update_flags;
+	__be32	rsdv1[3];
+	__be16	vxlan_udp_dport;
+	__be16	rsvd2;
+};
+
+#define MLX4_VXLAN_UDP_DPORT (1 << 0)
+
+static int mlx4_CONFIG_DEV(struct mlx4_dev *dev, struct mlx4_config_dev *config_dev)
+{
+	int err;
+	struct mlx4_cmd_mailbox *mailbox;
+
+	mailbox = mlx4_alloc_cmd_mailbox(dev);
+	if (IS_ERR(mailbox))
+		return PTR_ERR(mailbox);
+
+	memcpy(mailbox->buf, config_dev, sizeof(*config_dev));
+
+	err = mlx4_cmd(dev, mailbox->dma, 0, 0, MLX4_CMD_CONFIG_DEV,
+		       MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE);
+
+	mlx4_free_cmd_mailbox(dev, mailbox);
+	return err;
+}
+
+int mlx4_config_vxlan_port(struct mlx4_dev *dev, __be16 udp_port)
+{
+	struct mlx4_config_dev config_dev;
+
+	memset(&config_dev, 0, sizeof(config_dev));
+	config_dev.update_flags    = cpu_to_be32(MLX4_VXLAN_UDP_DPORT);
+	config_dev.vxlan_udp_dport = udp_port;
+
+	return mlx4_CONFIG_DEV(dev, &config_dev);
+}
+EXPORT_SYMBOL_GPL(mlx4_config_vxlan_port);
+
+
 int mlx4_SET_ICM_SIZE(struct mlx4_dev *dev, u64 icm_size, u64 *aux_pages)
 {
 	int ret = mlx4_cmd_imm(dev, icm_size, aux_pages, 0, 0,

drivers/net/ethernet/mellanox/mlx4/mlx4.h

@@ -1247,11 +1247,6 @@ int mlx4_QP_FLOW_STEERING_DETACH_wrapper(struct mlx4_dev *dev, int slave,
 					 struct mlx4_cmd_mailbox *inbox,
 					 struct mlx4_cmd_mailbox *outbox,
 					 struct mlx4_cmd_info *cmd);
-int mlx4_FLOW_STEERING_IB_UC_QP_RANGE_wrapper(struct mlx4_dev *dev, int slave,
-					      struct mlx4_vhcr *vhcr,
-					      struct mlx4_cmd_mailbox *inbox,
-					      struct mlx4_cmd_mailbox *outbox,
-					      struct mlx4_cmd_info *cmd);
 
 int mlx4_get_mgm_entry_size(struct mlx4_dev *dev);
 int mlx4_get_qp_per_mgm(struct mlx4_dev *dev);

drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

@@ -559,6 +559,8 @@ struct mlx4_en_priv {
 	struct work_struct linkstate_task;
 	struct delayed_work stats_task;
 	struct delayed_work service_task;
+	struct work_struct vxlan_add_task;
+	struct work_struct vxlan_del_task;
 	struct mlx4_en_perf_stats pstats;
 	struct mlx4_en_pkt_stats pkstats;
 	struct mlx4_en_port_stats port_stats;
@@ -585,6 +587,7 @@ struct mlx4_en_priv {
 	struct hlist_head filter_hash[1 << MLX4_EN_FILTER_HASH_SHIFT];
 #endif
 	u64 tunnel_reg_id;
+	__be16 vxlan_port;
 };
 
 enum mlx4_en_wol {

drivers/net/ethernet/mellanox/mlx4/port.c

@@ -988,7 +988,7 @@ struct mlx4_set_port_vxlan_context {
 	u8	steering;
 };
 
-int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering)
+int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering, int enable)
 {
 	int err;
 	u32 in_mod;
@@ -1002,7 +1002,8 @@ int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering)
 	memset(context, 0, sizeof(*context));
 
 	context->modify_flags = VXLAN_ENABLE_MODIFY | VXLAN_STEERING_MODIFY;
-	context->enable_flags = VXLAN_ENABLE;
+	if (enable)
+		context->enable_flags = VXLAN_ENABLE;
 	context->steering  = steering;
 
 	in_mod = MLX4_SET_PORT_VXLAN << 8 | port;

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

@@ -4015,16 +4015,6 @@ int mlx4_QUERY_IF_STAT_wrapper(struct mlx4_dev *dev, int slave,
 	return err;
 }
 
-int mlx4_FLOW_STEERING_IB_UC_QP_RANGE_wrapper(struct mlx4_dev *dev, int slave,
-					      struct mlx4_vhcr *vhcr,
-					      struct mlx4_cmd_mailbox *inbox,
-					      struct mlx4_cmd_mailbox *outbox,
-					      struct mlx4_cmd_info *cmd)
-{
-	return -EPERM;
-}
-
-
 static void detach_qp(struct mlx4_dev *dev, int slave, struct res_qp *rqp)
 {
 	struct res_gid *rgid;

include/linux/mlx4/cmd.h

@@ -125,6 +125,7 @@ enum {
 	/* miscellaneous commands */
 	MLX4_CMD_DIAG_RPRT	 = 0x30,
 	MLX4_CMD_NOP		 = 0x31,
+	MLX4_CMD_CONFIG_DEV	 = 0x3a,
 	MLX4_CMD_ACCESS_MEM	 = 0x2e,
 	MLX4_CMD_SET_VEP	 = 0x52,
 

include/linux/mlx4/device.h

@@ -1142,7 +1142,7 @@ int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
 int mlx4_SET_PORT_PRIO2TC(struct mlx4_dev *dev, u8 port, u8 *prio2tc);
 int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw,
 		u8 *pg, u16 *ratelimit);
-int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering);
+int mlx4_SET_PORT_VXLAN(struct mlx4_dev *dev, u8 port, u8 steering, int enable);
 int mlx4_find_cached_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *idx);
 int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx);
 int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);
@@ -1232,4 +1232,6 @@ struct mlx4_slaves_pport mlx4_phys_to_slaves_pport_actv(
 int mlx4_phys_to_slave_port(struct mlx4_dev *dev, int slave, int port);
 
 int mlx4_get_base_gid_ix(struct mlx4_dev *dev, int slave, int port);
+
+int mlx4_config_vxlan_port(struct mlx4_dev *dev, __be16 udp_port);
 #endif /* MLX4_DEVICE_H */