dt-bindings: add sff,sff binding for SFP support

Add "sff,sff" for SFF module support with SFP.  These have a different
phys_id value, and also have the present and rate select signals omitted
compared with their socketed counter-parts.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/sff,sfp.txt

@@ -3,7 +3,9 @@ Transceiver
 
 Required properties:
 
-- compatible : must be "sff,sfp"
+- compatible : must be one of
+  "sff,sfp" for SFP modules
+  "sff,sff" for soldered down SFF modules
 
 Optional Properties:
 
@@ -11,7 +13,8 @@ Optional Properties:
   interface
 
 - mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
-  module presence input gpio signal, active (module absent) high
+  module presence input gpio signal, active (module absent) high. Must
+  not be present for SFF modules
 
 - los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
   Indication input gpio signal, active (signal lost) high
@@ -24,10 +27,11 @@ Optional Properties:
 
 - rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
   Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
+  Must not be present for SFF modules
 
 - rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
   Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
-  high Tx rate
+  high Tx rate. Must not be present for SFF modules
 
 Example #1: Direct serdes to SFP connection