ALSA - hda: Add support for parsing new HDA capabilities

Skylake onwards HDA controller supports new capabilities like
Global Time Stamping (GTS) capability. So add support to parse
these new capabilities.

Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

include/sound/hda_register.h

@@ -89,6 +89,19 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 #define AZX_REG_SD_BDLPL		0x18
 #define AZX_REG_SD_BDLPU		0x1c
 
+/* GTS registers */
+#define AZX_REG_LLCH			0x14
+
+#define AZX_REG_GTS_BASE		0x520
+
+#define AZX_REG_GTSCC	(AZX_REG_GTS_BASE + 0x00)
+#define AZX_REG_WALFCC	(AZX_REG_GTS_BASE + 0x04)
+#define AZX_REG_TSCCL	(AZX_REG_GTS_BASE + 0x08)
+#define AZX_REG_TSCCU	(AZX_REG_GTS_BASE + 0x0C)
+#define AZX_REG_LLPFOC	(AZX_REG_GTS_BASE + 0x14)
+#define AZX_REG_LLPCL	(AZX_REG_GTS_BASE + 0x18)
+#define AZX_REG_LLPCU	(AZX_REG_GTS_BASE + 0x1C)
+
 /* Haswell/Broadwell display HD-A controller Extended Mode registers */
 #define AZX_REG_HSW_EM4			0x100c
 #define AZX_REG_HSW_EM5			0x1010
@@ -242,6 +255,29 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
 /* Interval used to calculate the iterating register offset */
 #define AZX_DRSM_INTERVAL		0x08
 
+/* Global time synchronization registers */
+#define GTSCC_TSCCD_MASK		0x80000000
+#define GTSCC_TSCCD_SHIFT		BIT(31)
+#define GTSCC_TSCCI_MASK		0x20
+#define GTSCC_CDMAS_DMA_DIR_SHIFT	4
+
+#define WALFCC_CIF_MASK			0x1FF
+#define WALFCC_FN_SHIFT			9
+#define HDA_CLK_CYCLES_PER_FRAME	512
+
+/*
+ * An error occurs near frame "rollover". The clocks in frame value indicates
+ * whether this error may have occurred. Here we use the value of 10. Please
+ * see the errata for the right number [<10]
+ */
+#define HDA_MAX_CYCLE_VALUE		499
+#define HDA_MAX_CYCLE_OFFSET		10
+#define HDA_MAX_CYCLE_READ_RETRY	10
+
+#define TSCCU_CCU_SHIFT			32
+#define LLPC_CCU_SHIFT			32
+
+
 /*
  * helpers to read the stream position
  */

sound/pci/hda/hda_controller.c

@@ -412,6 +412,11 @@ static int azx_pcm_open(struct snd_pcm_substream *substream)
 		goto unlock;
 	}
 	runtime->private_data = azx_dev;
+
+	if (chip->gts_present)
+		azx_pcm_hw.info = azx_pcm_hw.info |
+			SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME;
+
 	runtime->hw = azx_pcm_hw;
 	runtime->hw.channels_min = hinfo->channels_min;
 	runtime->hw.channels_max = hinfo->channels_max;

sound/pci/hda/hda_controller.h

@@ -159,6 +159,9 @@ struct azx {
 	unsigned int region_requested:1;
 	unsigned int disabled:1; /* disabled by vga_switcheroo */
 
+	/* GTS present */
+	unsigned int gts_present:1;
+
 #ifdef CONFIG_SND_HDA_DSP_LOADER
 	struct azx_dev saved_azx_dev;
 #endif

sound/pci/hda/hda_intel.c

@@ -54,6 +54,7 @@
 /* for snoop control */
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
 #endif
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -1655,6 +1656,22 @@ static int azx_first_init(struct azx *chip)
 		return -ENXIO;
 	}
 
+	if (IS_SKL_PLUS(pci))
+		snd_hdac_bus_parse_capabilities(bus);
+
+	/*
+	 * Some Intel CPUs has always running timer (ART) feature and
+	 * controller may have Global time sync reporting capability, so
+	 * check both of these before declaring synchronized time reporting
+	 * capability SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME
+	 */
+	chip->gts_present = false;
+
+#ifdef CONFIG_X86
+	if (bus->ppcap && boot_cpu_has(X86_FEATURE_ART))
+		chip->gts_present = true;
+#endif
+
 	if (chip->msi) {
 		if (chip->driver_caps & AZX_DCAPS_NO_MSI64) {
 			dev_dbg(card->dev, "Disabling 64bit MSI\n");