Merge 4.14-rc4 into usb-next

This merges in the USB fixes that we need here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.mailmap

@@ -68,6 +68,8 @@ Jacob Shin <Jacob.Shin@amd.com>
 James Bottomley <jejb@mulgrave.(none)>
 James Bottomley <jejb@titanic.il.steeleye.com>
 James E Wilson <wilson@specifix.com>
+James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
+James Hogan <jhogan@kernel.org> <james@albanarts.com>
 James Ketrenos <jketreno@io.(none)>
 Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
 <javier@osg.samsung.com> <javier.martinez@collabora.co.uk>

Documentation/ABI/testing/sysfs-power

@@ -127,7 +127,7 @@ Description:
 
 What;		/sys/power/pm_trace_dev_match
 Date:		October 2010
-Contact:	James Hogan <james@albanarts.com>
+Contact:	James Hogan <jhogan@kernel.org>
 Description:
 		The /sys/power/pm_trace_dev_match file contains the name of the
 		device associated with the last PM event point saved in the RTC

Documentation/core-api/workqueue.rst

@@ -39,8 +39,8 @@ up.
 Although MT wq wasted a lot of resource, the level of concurrency
 provided was unsatisfactory.  The limitation was common to both ST and
 MT wq albeit less severe on MT.  Each wq maintained its own separate
-worker pool.  A MT wq could provide only one execution context per CPU
-while a ST wq one for the whole system.  Work items had to compete for
+worker pool.  An MT wq could provide only one execution context per CPU
+while an ST wq one for the whole system.  Work items had to compete for
 those very limited execution contexts leading to various problems
 including proneness to deadlocks around the single execution context.
 
@@ -151,7 +151,7 @@ Application Programming Interface (API)
 
 ``alloc_workqueue()`` allocates a wq.  The original
 ``create_*workqueue()`` functions are deprecated and scheduled for
-removal.  ``alloc_workqueue()`` takes three arguments - @``name``,
+removal.  ``alloc_workqueue()`` takes three arguments - ``@name``,
 ``@flags`` and ``@max_active``.  ``@name`` is the name of the wq and
 also used as the name of the rescuer thread if there is one.
 
@@ -197,7 +197,7 @@ resources, scheduled and executed.
   served by worker threads with elevated nice level.
 
   Note that normal and highpri worker-pools don't interact with
-  each other.  Each maintain its separate pool of workers and
+  each other.  Each maintains its separate pool of workers and
   implements concurrency management among its workers.
 
 ``WQ_CPU_INTENSIVE``
@@ -249,8 +249,8 @@ unbound worker-pools and only one work item could be active at any given
 time thus achieving the same ordering property as ST wq.
 
 In the current implementation the above configuration only guarantees
-ST behavior within a given NUMA node. Instead alloc_ordered_queue should
-be used to achieve system wide ST behavior.
+ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should
+be used to achieve system-wide ST behavior.
 
 
 Example Execution Scenarios

Documentation/cpu-freq/index.txt

@@ -32,8 +32,6 @@ cpufreq-stats.txt -	General description of sysfs cpufreq stats.
 
 index.txt	-	File index, Mailing list and Links (this document)
 
-intel-pstate.txt -	Intel pstate cpufreq driver specific file.
-
 pcc-cpufreq.txt -	PCC cpufreq driver specific file.
 
 

Documentation/device-mapper/dm-raid.txt

@@ -344,3 +344,4 @@ Version History
 	(wrong raid10_copies/raid10_format sequence)
 1.11.1  Add raid4/5/6 journal write-back support via journal_mode option
 1.12.1  fix for MD deadlock between mddev_suspend() and md_write_start() available
+1.13.0  Fix dev_health status at end of "recover" (was 'a', now 'A')

Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt

@@ -32,7 +32,7 @@ Example:
 		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
 		reg = <0x58024400 0x400>;
 		#reset-cells = <1>;
-		#clock-cells = <2>;
+		#clock-cells = <1>;
 		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
 
 		st,syscfg = <&pwrcfg>;

Documentation/devicetree/bindings/leds/ams,as3645a.txt

@@ -15,11 +15,14 @@ Required properties
 
 compatible	: Must be "ams,as3645a".
 reg		: The I2C address of the device. Typically 0x30.
+#address-cells	: 1
+#size-cells	: 0
 
 
-Required properties of the "flash" child node
-=============================================
+Required properties of the flash child node (0)
+===============================================
 
+reg: 0
 flash-timeout-us: Flash timeout in microseconds. The value must be in
 		  the range [100000, 850000] and divisible by 50000.
 flash-max-microamp: Maximum flash current in microamperes. Has to be
@@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The
 			and divisible by 50000.
 
 
-Optional properties of the "flash" child node
-=============================================
+Optional properties of the flash child node
+===========================================
 
 label		: The label of the flash LED.
 
 
-Required properties of the "indicator" child node
-=================================================
+Required properties of the indicator child node (1)
+===================================================
 
+reg: 1
 led-max-microamp: Maximum indicator current. The allowed values are
 		  2500, 5000, 7500 and 10000.
 
-Optional properties of the "indicator" child node
-=================================================
+Optional properties of the indicator child node
+===============================================
 
 label		: The label of the indicator LED.
 
@@ -55,16 +59,20 @@ Example
 =======
 
 	as3645a@30 {
+		#address-cells: 1
+		#size-cells: 0
 		reg = <0x30>;
 		compatible = "ams,as3645a";
-		flash {
+		flash@0 {
+			reg = <0x0>;
 			flash-timeout-us = <150000>;
 			flash-max-microamp = <320000>;
 			led-max-microamp = <60000>;
 			ams,input-max-microamp = <1750000>;
 			label = "as3645a:flash";
 		};
-		indicator {
+		indicator@1 {
+			reg = <0x1>;
 			led-max-microamp = <10000>;
 			label = "as3645a:indicator";
 		};

Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt

@@ -16,11 +16,13 @@ Required Properties:
 
 - clocks:
   Array of clocks required for SDHC.
-  Require at least input clock for Xenon IP core.
+  Require at least input clock for Xenon IP core. For Armada AP806 and
+  CP110, the AXI clock is also mandatory.
 
 - clock-names:
   Array of names corresponding to clocks property.
   The input clock for Xenon IP core should be named as "core".
+  The input clock for the AXI bus must be named as "axi".
 
 - reg:
   * For "marvell,armada-3700-sdhci", two register areas.
@@ -106,8 +108,8 @@ Example:
 		compatible = "marvell,armada-ap806-sdhci";
 		reg = <0xaa0000 0x1000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmc_clk>;
-		clock-names = "core";
+		clocks = <&emmc_clk>,<&axi_clk>;
+		clock-names = "core", "axi";
 		bus-width = <4>;
 		marvell,xenon-phy-slow-mode;
 		marvell,xenon-tun-count = <11>;
@@ -126,8 +128,8 @@ Example:
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
 		vqmmc-supply = <&sd_vqmmc_regulator>;
 		vmmc-supply = <&sd_vmmc_regulator>;
-		clocks = <&sdclk>;
-		clock-names = "core";
+		clocks = <&sdclk>, <&axi_clk>;
+		clock-names = "core", "axi";
 		bus-width = <4>;
 		marvell,xenon-tun-count = <9>;
 	};

Documentation/devicetree/bindings/net/marvell-pp2.txt

@@ -21,8 +21,9 @@ Required properties:
 	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
 	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
 	- MG clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
-  "mg_clk" (the latter only for armada-7k-pp2).
+	- AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
+  and "axi_clk" (the 2 latter only for armada-7k-pp2).
 
 The ethernet ports are represented by subnodes. At least one port is
 required.
@@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2:
 cpm_ethernet: ethernet@0 {
 	compatible = "marvell,armada-7k-pp22";
 	reg = <0x0 0x100000>, <0x129000 0xb000>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
-	clock-names = "pp_clk", "gop_clk", "gp_clk";
+	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
+	clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
 
 	eth0: eth0 {
 		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,

Documentation/devicetree/bindings/net/rockchip-dwmac.txt

@@ -4,6 +4,7 @@ The device node has following properties.
 
 Required properties:
  - compatible: should be "rockchip,<name>-gamc"
+   "rockchip,rk3128-gmac": found on RK312x SoCs
    "rockchip,rk3228-gmac": found on RK322x SoCs
    "rockchip,rk3288-gmac": found on RK3288 SoCs
    "rockchip,rk3328-gmac": found on RK3328 SoCs

Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt

@@ -0,0 +1,28 @@
+Binding for the Synopsys HSDK reset controller
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-reset".
+- reg: should always contain 2 pairs address - length: first for reset
+  configuration register and second for corresponding SW reset and status bits
+  register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset@880 {
+		compatible = "snps,hsdk-reset";
+		#reset-cells = <1>;
+		reg = <0x8A0 0x4>, <0xFF0 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset HSDK_V1_ETH_RESET>;
+		....
+	};
+
+The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>

Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt

@@ -8,6 +8,12 @@ Required properties:
                    the firmware event log
 - linux,sml-size : size of the memory allocated for the firmware event log
 
+Optional properties:
+
+- powered-while-suspended: present when the TPM is left powered on between
+                           suspend and resume (makes the suspend/resume
+                           callbacks do nothing).
+
 Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
 ----------------------------------------------------------
 

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -41,6 +41,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
+    - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
     - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
     - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -3,8 +3,8 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
-abcn	Abracon Corporation
 abilis	Abilis Systems
+abracon	Abracon Corporation
 actions	Actions Semiconductor Co., Ltd.
 active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH

Documentation/driver-api/pm/devices.rst

@@ -675,7 +675,7 @@ sub-domain of the parent domain.
 
 Support for power domains is provided through the :c:member:`pm_domain` field of
 |struct device|.  This field is a pointer to an object of type
-|struct dev_pm_domain|, defined in :file:`include/linux/pm.h``, providing a set
+|struct dev_pm_domain|, defined in :file:`include/linux/pm.h`, providing a set
 of power management callbacks analogous to the subsystem-level and device driver
 callbacks that are executed for the given device during all power transitions,
 instead of the respective subsystem-level callbacks.  Specifically, if a

Documentation/driver-model/driver.txt

@@ -196,12 +196,13 @@ struct driver_attribute {
 };
 
 Device drivers can export attributes via their sysfs directories. 
-Drivers can declare attributes using a DRIVER_ATTR macro that works
-identically to the DEVICE_ATTR macro. 
+Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
+macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
+macros.
 
 Example:
 
-DRIVER_ATTR(debug,0644,show_debug,store_debug);
+DRIVER_ATTR_RW(debug);
 
 This is equivalent to declaring:
 

Documentation/filesystems/cifs/AUTHORS

@@ -41,6 +41,11 @@ Igor Mammedov (DFS support)
 Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
 Scott Lovenberg
 Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features)
+Aurelien Aptel (for DFS SMB3 work and some key bug fixes)
+Ronnie Sahlberg (for SMB3 xattr work and bug fixes)
+Shirish Pargaonkar (for many ACL patches over the years)
+Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security)
+
 
 Test case and Bug Report contributors
 -------------------------------------

Documentation/filesystems/cifs/README

@@ -1,10 +1,14 @@
-The CIFS VFS support for Linux supports many advanced network filesystem 
-features such as hierarchical dfs like namespace, hardlinks, locking and more.  
+This module supports the SMB3 family of advanced network protocols (as well
+as older dialects, originally called "CIFS" or SMB1).
+
+The CIFS VFS module for Linux supports many advanced network filesystem
+features such as hierarchical DFS like namespace, hardlinks, locking and more.
 It was designed to comply with the SNIA CIFS Technical Reference (which 
 supersedes the 1992 X/Open SMB Standard) as well as to perform best practice 
 practical interoperability with Windows 2000, Windows XP, Samba and equivalent 
 servers.  This code was developed in participation with the Protocol Freedom
-Information Foundation.
+Information Foundation.  CIFS and now SMB3 has now become a defacto
+standard for interoperating between Macs and Windows and major NAS appliances.
 
 Please see
   http://protocolfreedom.org/ and
@@ -15,30 +19,11 @@ for more details.
 For questions or bug reports please contact:
     sfrench@samba.org (sfrench@us.ibm.com) 
 
+See the project page at: https://wiki.samba.org/index.php/LinuxCIFS_utils
+
 Build instructions:
 ==================
-For Linux 2.4:
-1) Get the kernel source (e.g.from http://www.kernel.org)
-and download the cifs vfs source (see the project page
-at http://us1.samba.org/samba/Linux_CIFS_client.html)
-and change directory into the top of the kernel directory
-then patch the kernel (e.g. "patch -p1 < cifs_24.patch") 
-to add the cifs vfs to your kernel configure options if
-it has not already been added (e.g. current SuSE and UL
-users do not need to apply the cifs_24.patch since the cifs vfs is
-already in the kernel configure menu) and then
-mkdir linux/fs/cifs and then copy the current cifs vfs files from
-the cifs download to your kernel build directory e.g.
-
-	cp <cifs_download_dir>/fs/cifs/* to <kernel_download_dir>/fs/cifs
-	
-2) make menuconfig (or make xconfig)
-3) select cifs from within the network filesystem choices
-4) save and exit
-5) make dep
-6) make modules (or "make" if CIFS VFS not to be built as a module)
-
-For Linux 2.6:
+For Linux:
 1) Download the kernel (e.g. from http://www.kernel.org)
 and change directory into the top of the kernel directory tree
 (e.g. /usr/src/linux-2.5.73)
@@ -61,16 +46,13 @@ would simply type "make install").
 If you do not have the utility mount.cifs (in the Samba 3.0 source tree and on 
 the CIFS VFS web site) copy it to the same directory in which mount.smbfs and 
 similar files reside (usually /sbin).  Although the helper software is not  
-required, mount.cifs is recommended.  Eventually the Samba 3.0 utility program 
-"net" may also be helpful since it may someday provide easier mount syntax for
-users who are used to Windows e.g.
-	net use <mount point> <UNC name or cifs URL>
+required, mount.cifs is recommended.  Most distros include a "cifs-utils"
+package that includes this utility so it is recommended to install this.
+
 Note that running the Winbind pam/nss module (logon service) on all of your
 Linux clients is useful in mapping Uids and Gids consistently across the
 domain to the proper network user.  The mount.cifs mount helper can be
-trivially built from Samba 3.0 or later source e.g. by executing:
-
-	gcc samba/source/client/mount.cifs.c -o mount.cifs
+found at cifs-utils.git on git.samba.org
 
 If cifs is built as a module, then the size and number of network buffers
 and maximum number of simultaneous requests to one server can be configured.
@@ -79,6 +61,18 @@ Changing these from their defaults is not recommended. By executing modinfo
 on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made
 at module initialization time (by running insmod cifs.ko) can be seen.
 
+Recommendations
+===============
+To improve security the SMB2.1 dialect or later (usually will get SMB3) is now
+the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0"
+on mount (or vers=2.0 for Windows Vista).  Note that the CIFS (vers=1.0) is
+much older and less secure than the default dialect SMB3 which includes
+many advanced security features such as downgrade attack detection
+and encrypted shares and stronger signing and authentication algorithms.
+There are additional mount options that may be helpful for SMB3 to get
+improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1):
+     "mfsymlinks" and "cifsacl" and "idsfromsid"
+
 Allowing User Mounts
 ====================
 To permit users to mount and unmount over directories they own is possible
@@ -98,9 +92,7 @@ and execution of suid programs on the remote target would be enabled
 by default. This can be changed, as with nfs and other filesystems, 
 by simply specifying "nosuid" among the mount options. For user mounts 
 though to be able to pass the suid flag to mount requires rebuilding 
-mount.cifs with the following flag: 
- 
-        gcc samba/source/client/mount.cifs.c -DCIFS_ALLOW_USR_SUID -o mount.cifs
+mount.cifs with the following flag: CIFS_ALLOW_USR_SUID
 
 There is a corresponding manual page for cifs mounting in the Samba 3.0 and
 later source tree in docs/manpages/mount.cifs.8 
@@ -189,18 +181,18 @@ applications running on the same server as Samba.
 Use instructions:
 ================
 Once the CIFS VFS support is built into the kernel or installed as a module 
-(cifs.o), you can use mount syntax like the following to access Samba or Windows 
-servers: 
+(cifs.ko), you can use mount syntax like the following to access Samba or
+Mac or Windows servers:
 
-  mount -t cifs //9.53.216.11/e$ /mnt -o user=myname,pass=mypassword
+  mount -t cifs //9.53.216.11/e$ /mnt -o username=myname,password=mypassword
 
 Before -o the option -v may be specified to make the mount.cifs
 mount helper display the mount steps more verbosely.  
 After -o the following commonly used cifs vfs specific options
 are supported:
 
-  user=<username>
-  pass=<password>
+  username=<username>
+  password=<password>
   domain=<domain name>
   
 Other cifs mount options are described below.  Use of TCP names (in addition to
@@ -246,13 +238,16 @@ the Server's registry.  Samba starting with version 3.10 will allow such
 filenames (ie those which contain valid Linux characters, which normally
 would be forbidden for Windows/CIFS semantics) as long as the server is
 configured for Unix Extensions (and the client has not disabled
-/proc/fs/cifs/LinuxExtensionsEnabled).
-  
+/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option
+"mapposix" can be used on CIFS (vers=1.0) to force the mapping of
+illegal Windows/NTFS/SMB characters to a remap range (this mount parm
+is the default for SMB3). This remap ("mapposix") range is also
+compatible with Mac (and "Services for Mac" on some older Windows).
 
 CIFS VFS Mount Options
 ======================
 A partial list of the supported mount options follows:
-  user		The user name to use when trying to establish
+  username	The user name to use when trying to establish
 		the CIFS session.
   password	The user password.  If the mount helper is
 		installed, the user will be prompted for password

Documentation/filesystems/cifs/TODO

@@ -1,4 +1,4 @@
-Version 2.03 August 1, 2014
+Version 2.04 September 13, 2017
 
 A Partial List of Missing Features
 ==================================
@@ -8,73 +8,69 @@ for visible, important contributions to this module.  Here
 is a partial list of the known problems and missing features:
 
 a) SMB3 (and SMB3.02) missing optional features:
-   - RDMA
+   - RDMA (started)
    - multichannel (started)
    - directory leases (improved metadata caching)
    - T10 copy offload (copy chunk is only mechanism supported)
-   - encrypted shares
 
 b) improved sparse file support
 
 c) Directory entry caching relies on a 1 second timer, rather than
-using FindNotify or equivalent.  - (started)
+using Directory Leases
 
 d) quota support (needs minor kernel change since quota calls
 to make it to network filesystems or deviceless filesystems)
 
-e) improve support for very old servers (OS/2 and Win9x for example)
-Including support for changing the time remotely (utimes command).
+e) Better optimize open to reduce redundant opens (using reference
+counts more) and to improve use of compounding in SMB3 to reduce
+number of roundtrips.
 
-f) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
-extra copy in/out of the socket buffers in some cases.
-
-g) Better optimize open (and pathbased setfilesize) to reduce the
-oplock breaks coming from windows srv.  Piggyback identical file
-opens on top of each other by incrementing reference count rather
-than resending (helps reduce server resource utilization and avoid
-spurious oplock breaks).
-
-h) Add support for storing symlink info to Windows servers
-in the Extended Attribute format their SFU clients would recognize.
-
-i) Finish inotify support so kde and gnome file list windows
+f) Finish inotify support so kde and gnome file list windows
 will autorefresh (partially complete by Asser). Needs minor kernel
 vfs change to support removing D_NOTIFY on a file.   
 
-j) Add GUI tool to configure /proc/fs/cifs settings and for display of
+g) Add GUI tool to configure /proc/fs/cifs settings and for display of
 the CIFS statistics (started)
 
-k) implement support for security and trusted categories of xattrs
+h) implement support for security and trusted categories of xattrs
 (requires minor protocol extension) to enable better support for SELINUX
 
-l) Implement O_DIRECT flag on open (already supported on mount)
+i) Implement O_DIRECT flag on open (already supported on mount)
 
-m) Create UID mapping facility so server UIDs can be mapped on a per
+j) Create UID mapping facility so server UIDs can be mapped on a per
 mount or a per server basis to client UIDs or nobody if no mapping
-exists.  This is helpful when Unix extensions are negotiated to
-allow better permission checking when UIDs differ on the server
-and client.  Add new protocol request to the CIFS protocol 
-standard for asking the server for the corresponding name of a
-particular uid.
+exists. Also better integration with winbind for resolving SID owners
+
+k) Add tools to take advantage of more smb3 specific ioctls and features
+
+l) encrypted file support
+
+m) improved stats gathering, tools (perhaps integration with nfsometer?)
 
-n) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too)
+n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
+file attribute via chflags) and improve user space tools for managing and
+viewing them.
 
-o) mount check for unmatched uids
+o) mount helper GUI (to simplify the various configuration options on mount)
 
-p) Add support for new vfs entry point for fallocate
+p) autonegotiation of dialects (offering more than one dialect ie SMB3.02,
+SMB3, SMB2.1 not just SMB3).
 
-q) Add tools to take advantage of cifs/smb3 specific ioctls and features
-such as "CopyChunk" (fast server side file copy)
+q) Allow mount.cifs to be more verbose in reporting errors with dialect
+or unsupported feature errors.
 
-r) encrypted file support
+r) updating cifs documentation, and user guid.
 
-s) improved stats gathering, tools (perhaps integration with nfsometer?)
+s) Addressing bugs found by running a broader set of xfstests in standard
+file system xfstest suite.
 
-t) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed
-file attribute via chflags)
+t) split cifs and smb3 support into separate modules so legacy (and less
+secure) CIFS dialect can be disabled in environments that don't need it
+and simplify the code.
 
-u) mount helper GUI (to simplify the various configuration options on mount)
+u) Finish up SMB3.1.1 dialect support
 
+v) POSIX Extensions for SMB3.1.1
 
 KNOWN BUGS
 ====================================

Documentation/filesystems/cifs/cifs.txt

@@ -1,24 +1,28 @@
-  This is the client VFS module for the Common Internet File System
-  (CIFS) protocol which is the successor to the Server Message Block 
+  This is the client VFS module for the SMB3 NAS protocol as well
+  older dialects such as the Common Internet File System (CIFS)
+  protocol which was the successor to the Server Message Block
   (SMB) protocol, the native file sharing mechanism for most early
   PC operating systems. New and improved versions of CIFS are now
   called SMB2 and SMB3. These dialects are also supported by the
   CIFS VFS module. CIFS is fully supported by network
-  file servers such as Windows 2000, 2003, 2008 and 2012
+  file servers such as Windows 2000, 2003, 2008, 2012 and 2016
   as well by Samba (which provides excellent CIFS
-  server support for Linux and many other operating systems), so
+  server support for Linux and many other operating systems), Apple
+  systems, as well as most Network Attached Storage vendors, so
   this network filesystem client can mount to a wide variety of
   servers.
 
   The intent of this module is to provide the most advanced network
-  file system function for CIFS compliant servers, including better
-  POSIX compliance, secure per-user session establishment, high
-  performance safe distributed caching (oplock), optional packet
+  file system function for SMB3 compliant servers, including advanced
+  security features, excellent parallelized high performance i/o, better
+  POSIX compliance, secure per-user session establishment, encryption,
+  high performance safe distributed caching (leases/oplocks), optional packet
   signing, large files, Unicode support and other internationalization
   improvements. Since both Samba server and this filesystem client support
-  the CIFS Unix extensions, the combination can provide a reasonable 
-  alternative to NFSv4 for fileserving in some Linux to Linux environments,
-  not just in Linux to Windows environments.
+  the CIFS Unix extensions (and in the future SMB3 POSIX extensions),
+  the combination can provide a reasonable alternative to other network and
+  cluster file systems for fileserving in some Linux to Linux environments,
+  not just in Linux to Windows (or Linux to Mac) environments.
 
   This filesystem has an mount utility (mount.cifs) that can be obtained from
 

Documentation/filesystems/overlayfs.txt

@@ -210,8 +210,11 @@ path as another overlay mount and it may use a lower layer path that is
 beneath or above the path of another overlay lower layer path.
 
 Using an upper layer path and/or a workdir path that are already used by
-another overlay mount is not allowed and will fail with EBUSY.  Using
+another overlay mount is not allowed and may fail with EBUSY.  Using
 partially overlapping paths is not allowed but will not fail with EBUSY.
+If files are accessed from two overlayfs mounts which share or overlap the
+upper layer and/or workdir path the behavior of the overlay is undefined,
+though it will not result in a crash or deadlock.
 
 Mounting an overlay using an upper layer path, where the upper layer path
 was previously used by another mounted overlay in combination with a

Documentation/filesystems/sysfs.txt

@@ -366,7 +366,8 @@ struct driver_attribute {
 
 Declaring:
 
-DRIVER_ATTR(_name, _mode, _show, _store)
+DRIVER_ATTR_RO(_name)
+DRIVER_ATTR_RW(_name)
 
 Creation/Removal:
 

Documentation/i2c/busses/i2c-i801

@@ -36,6 +36,7 @@ Supported adapters:
   * Intel Gemini Lake (SOC)
   * Intel Cannon Lake-H (PCH)
   * Intel Cannon Lake-LP (PCH)
+  * Intel Cedar Fork (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/networking/filter.txt

@@ -337,7 +337,7 @@ Examples for low-level BPF:
   jeq #14, good           /* __NR_rt_sigprocmask */
   jeq #13, good           /* __NR_rt_sigaction */
   jeq #35, good           /* __NR_nanosleep */
-  bad: ret #0             /* SECCOMP_RET_KILL */
+  bad: ret #0             /* SECCOMP_RET_KILL_THREAD */
   good: ret #0x7fff0000   /* SECCOMP_RET_ALLOW */
 
 The above example code can be placed into a file (here called "foo"), and

Documentation/networking/ip-sysctl.txt

@@ -1680,6 +1680,9 @@ accept_dad - INTEGER
 	2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
 	   link-local address has been found.
 
+	DAD operation and mode on a given interface will be selected according
+	to the maximum value of conf/{all,interface}/accept_dad.
+
 force_tllao - BOOLEAN
 	Enable sending the target link-layer address option even when
 	responding to a unicast neighbor solicitation.
@@ -1727,16 +1730,23 @@ suppress_frag_ndisc - INTEGER
 
 optimistic_dad - BOOLEAN
 	Whether to perform Optimistic Duplicate Address Detection (RFC 4429).
-		0: disabled (default)
-		1: enabled
+	0: disabled (default)
+	1: enabled
+
+	Optimistic Duplicate Address Detection for the interface will be enabled
+	if at least one of conf/{all,interface}/optimistic_dad is set to 1,
+	it will be disabled otherwise.
 
 use_optimistic - BOOLEAN
 	If enabled, do not classify optimistic addresses as deprecated during
 	source address selection.  Preferred addresses will still be chosen
 	before optimistic addresses, subject to other ranking in the source
 	address selection algorithm.
-		0: disabled (default)
-		1: enabled
+	0: disabled (default)
+	1: enabled
+
+	This will be enabled if at least one of
+	conf/{all,interface}/use_optimistic is set to 1, disabled otherwise.
 
 stable_secret - IPv6 address
 	This IPv6 address will be used as a secret to generate IPv6

Documentation/networking/switchdev.txt

@@ -13,42 +13,42 @@ an example setup using a data-center-class switch ASIC chip.  Other setups
 with SR-IOV or soft switches, such as OVS, are possible.
 
 
-                             User-space tools
-
-       user space                   |
-      +-------------------------------------------------------------------+
-       kernel                       | Netlink
-                                    |
-                     +--------------+-------------------------------+
-                     |         Network stack                        |
-                     |           (Linux)                            |
-                     |                                              |
-                     +----------------------------------------------+
+                             User-space tools
+
+       user space                   |
+      +-------------------------------------------------------------------+
+       kernel                       | Netlink
+                                    |
+                     +--------------+-------------------------------+
+                     |         Network stack                        |
+                     |           (Linux)                            |
+                     |                                              |
+                     +----------------------------------------------+
 
                            sw1p2     sw1p4     sw1p6
-                      sw1p1  +  sw1p3  +  sw1p5  +          eth1
-                        +    |    +    |    +    |            +
-                        |    |    |    |    |    |            |
-                     +--+----+----+----+-+--+----+---+  +-----+-----+
-                     |         Switch driver         |  |    mgmt   |
-                     |        (this document)        |  |   driver  |
-                     |                               |  |           |
-                     +--------------+----------------+  +-----------+
-                                    |
-       kernel                       | HW bus (eg PCI)
-      +-------------------------------------------------------------------+
-       hardware                     |
-                     +--------------+---+------------+
-                     |         Switch device (sw1)   |
-                     |  +----+                       +--------+
-                     |  |    v offloaded data path   | mgmt port
-                     |  |    |                       |
-                     +--|----|----+----+----+----+---+
-                        |    |    |    |    |    |
-                        +    +    +    +    +    +
-                       p1   p2   p3   p4   p5   p6
-
-                             front-panel ports
+                      sw1p1  +  sw1p3  +  sw1p5  +          eth1
+                        +    |    +    |    +    |            +
+                        |    |    |    |    |    |            |
+                     +--+----+----+----+----+----+---+  +-----+-----+
+                     |         Switch driver         |  |    mgmt   |
+                     |        (this document)        |  |   driver  |
+                     |                               |  |           |
+                     +--------------+----------------+  +-----------+
+                                    |
+       kernel                       | HW bus (eg PCI)
+      +-------------------------------------------------------------------+
+       hardware                     |
+                     +--------------+----------------+
+                     |         Switch device (sw1)   |
+                     |  +----+                       +--------+
+                     |  |    v offloaded data path   | mgmt port
+                     |  |    |                       |
+                     +--|----|----+----+----+----+---+
+                        |    |    |    |    |    |
+                        +    +    +    +    +    +
+                       p1   p2   p3   p4   p5   p6
+
+                             front-panel ports
 
 
                                     Fig 1.

Documentation/sysctl/kernel.txt

@@ -75,6 +75,7 @@ show up in /proc/sys/kernel:
 - reboot-cmd                  [ SPARC only ]
 - rtsig-max
 - rtsig-nr
+- seccomp/                    ==> Documentation/userspace-api/seccomp_filter.rst
 - sem
 - sem_next_id		      [ sysv ipc ]
 - sg-big-buff                 [ generic SCSI device (sg) ]

Documentation/userspace-api/seccomp_filter.rst

@@ -87,11 +87,16 @@ Return values
 A seccomp filter may return any of the following values. If multiple
 filters exist, the return value for the evaluation of a given system
 call will always use the highest precedent value. (For example,
-``SECCOMP_RET_KILL`` will always take precedence.)
+``SECCOMP_RET_KILL_PROCESS`` will always take precedence.)
 
 In precedence order, they are:
 
-``SECCOMP_RET_KILL``:
+``SECCOMP_RET_KILL_PROCESS``:
+	Results in the entire process exiting immediately without executing
+	the system call.  The exit status of the task (``status & 0x7f``)
+	will be ``SIGSYS``, not ``SIGKILL``.
+
+``SECCOMP_RET_KILL_THREAD``:
 	Results in the task exiting immediately without executing the
 	system call.  The exit status of the task (``status & 0x7f``) will
 	be ``SIGSYS``, not ``SIGKILL``.
@@ -141,6 +146,15 @@ In precedence order, they are:
 	allow use of ptrace, even of other sandboxed processes, without
 	extreme care; ptracers can use this mechanism to escape.)
 
+``SECCOMP_RET_LOG``:
+	Results in the system call being executed after it is logged. This
+	should be used by application developers to learn which syscalls their
+	application needs without having to iterate through multiple test and
+	development cycles to build the list.
+
+	This action will only be logged if "log" is present in the
+	actions_logged sysctl string.
+
 ``SECCOMP_RET_ALLOW``:
 	Results in the system call being executed.
 
@@ -169,7 +183,41 @@ The ``samples/seccomp/`` directory contains both an x86-specific example
 and a more generic example of a higher level macro interface for BPF
 program generation.
 
+Sysctls
+=======
 
+Seccomp's sysctl files can be found in the ``/proc/sys/kernel/seccomp/``
+directory. Here's a description of each file in that directory:
+
+``actions_avail``:
+	A read-only ordered list of seccomp return values (refer to the
+	``SECCOMP_RET_*`` macros above) in string form. The ordering, from
+	left-to-right, is the least permissive return value to the most
+	permissive return value.
+
+	The list represents the set of seccomp return values supported
+	by the kernel. A userspace program may use this list to
+	determine if the actions found in the ``seccomp.h``, when the
+	program was built, differs from the set of actions actually
+	supported in the current running kernel.
+
+``actions_logged``:
+	A read-write ordered list of seccomp return values (refer to the
+	``SECCOMP_RET_*`` macros above) that are allowed to be logged. Writes
+	to the file do not need to be in ordered form but reads from the file
+	will be ordered in the same way as the actions_avail sysctl.
+
+	It is important to note that the value of ``actions_logged`` does not
+	prevent certain actions from being logged when the audit subsystem is
+	configured to audit a task. If the action is not found in
+	``actions_logged`` list, the final decision on whether to audit the
+	action for that task is ultimately left up to the audit subsystem to
+	decide for all seccomp return values other than ``SECCOMP_RET_ALLOW``.
+
+	The ``allow`` string is not accepted in the ``actions_logged`` sysctl
+	as it is not possible to log ``SECCOMP_RET_ALLOW`` actions. Attempting
+	to write ``allow`` to the sysctl will result in an EINVAL being
+	returned.
 
 Adding architecture support
 ===========================

MAINTAINERS

@@ -352,6 +352,18 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	drivers/acpi/arm64
 
+ACPI PMIC DRIVERS
+M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	Len Brown <lenb@kernel.org>
+R:	Andy Shevchenko <andy@infradead.org>
+R:	Mika Westerberg <mika.westerberg@linux.intel.com>
+L:	linux-acpi@vger.kernel.org
+Q:	https://patchwork.kernel.org/project/linux-acpi/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
+S:	Supported
+F:	drivers/acpi/pmic/
+
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -2853,7 +2865,6 @@ S:	Supported
 F:	drivers/scsi/bnx2i/
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Yuval Mintz <Yuval.Mintz@cavium.com>
 M:	Ariel Elior <ariel.elior@cavium.com>
 M:	everest-linux-l2@cavium.com
 L:	netdev@vger.kernel.org
@@ -5248,7 +5259,8 @@ S:	Maintained
 F:	drivers/iommu/exynos-iommu.c
 
 EZchip NPS platform support
-M:	Noam Camus <noamc@ezchip.com>
+M:	Elad Kanfi <eladkan@mellanox.com>
+M:	Vineet Gupta <vgupta@synopsys.com>
 S:	Supported
 F:	arch/arc/plat-eznps
 F:	arch/arc/boot/dts/eznps.dts
@@ -6643,8 +6655,8 @@ M:	Alexander Aring <alex.aring@gmail.com>
 M:	Stefan Schmidt <stefan@osg.samsung.com>
 L:	linux-wpan@vger.kernel.org
 W:	http://wpan.cakelab.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next.git
 S:	Maintained
 F:	net/ieee802154/
 F:	net/mac802154/
@@ -6727,7 +6739,7 @@ F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
 F:	drivers/auxdisplay/img-ascii-lcd.c
 
 IMGTEC IR DECODER DRIVER
-M:	James Hogan <james.hogan@imgtec.com>
+M:	James Hogan <jhogan@kernel.org>
 S:	Maintained
 F:	drivers/media/rc/img-ir/
 
@@ -7551,7 +7563,7 @@ F:	arch/arm64/include/asm/kvm*
 F:	arch/arm64/kvm/
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
-M:	James Hogan <james.hogan@imgtec.com>
+M:	James Hogan <jhogan@kernel.org>
 L:	linux-mips@linux-mips.org
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
@@ -8253,6 +8265,12 @@ L:	libertas-dev@lists.infradead.org
 S:	Orphan
 F:	drivers/net/wireless/marvell/libertas/
 
+MARVELL MACCHIATOBIN SUPPORT
+M:	Russell King <rmk@armlinux.org.uk>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+
 MARVELL MV643XX ETHERNET DRIVER
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	netdev@vger.kernel.org
@@ -8586,6 +8604,12 @@ M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
 F:	drivers/media/rc/mtk-cir.c
 
+MEDIATEK PMIC LED DRIVER
+M:	Sean Wang <sean.wang@mediatek.com>
+S:	Maintained
+F:	drivers/leds/leds-mt6323.c
+F:	Documentation/devicetree/bindings/leds/leds-mt6323.txt
+
 MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <nbd@openwrt.org>
 M:	John Crispin <john@phrozen.org>
@@ -8868,7 +8892,7 @@ F:	Documentation/devicetree/bindings/media/meson-ao-cec.txt
 T:	git git://linuxtv.org/media_tree.git
 
 METAG ARCHITECTURE
-M:	James Hogan <james.hogan@imgtec.com>
+M:	James Hogan <jhogan@kernel.org>
 L:	linux-metag@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag.git
 S:	Odd Fixes
@@ -9337,7 +9361,7 @@ NETWORK BLOCK DEVICE (NBD)
 M:	Josef Bacik <jbacik@fb.com>
 S:	Maintained
 L:	linux-block@vger.kernel.org
-L:	nbd-general@lists.sourceforge.net
+L:	nbd@other.debian.org
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/uapi/linux/nbd.h
@@ -11047,7 +11071,6 @@ S:	Supported
 F:	drivers/scsi/qedi/
 
 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Yuval Mintz <Yuval.Mintz@cavium.com>
 M:	Ariel Elior <Ariel.Elior@cavium.com>
 M:	everest-linux-l2@cavium.com
 L:	netdev@vger.kernel.org
@@ -12915,9 +12938,9 @@ F:	drivers/mmc/host/dw_mmc*
 SYNOPSYS HSDK RESET CONTROLLER DRIVER
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Supported
-F:	drivers/reset/reset-hsdk-v1.c
-F:	include/dt-bindings/reset/snps,hsdk-v1-reset.h
-F:	Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
+F:	drivers/reset/reset-hsdk.c
+F:	include/dt-bindings/reset/snps,hsdk-reset.h
+F:	Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
 
 SYSTEM CONFIGURATION (SYSCON)
 M:	Lee Jones <lee.jones@linaro.org>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -1172,11 +1172,11 @@ headers_check: headers_install
 
 PHONY += kselftest
 kselftest:
-	$(Q)$(MAKE) -C tools/testing/selftests run_tests
+	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
 
 PHONY += kselftest-clean
 kselftest-clean:
-	$(Q)$(MAKE) -C tools/testing/selftests clean
+	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
 
 PHONY += kselftest-merge
 kselftest-merge:

arch/alpha/include/asm/mmu_context.h

@@ -8,6 +8,7 @@
  */
 
 #include <linux/mm_types.h>
+#include <linux/sched.h>
 
 #include <asm/machvec.h>
 #include <asm/compiler.h>

arch/arc/Kconfig

@@ -24,7 +24,7 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_FUTEX_CMPXCHG
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES

arch/arc/Makefile

@@ -6,8 +6,6 @@
 # published by the Free Software Foundation.
 #
 
-UTS_MACHINE := arc
-
 ifeq ($(CROSS_COMPILE),)
 ifndef CONFIG_CPU_BIG_ENDIAN
 CROSS_COMPILE := arc-linux-

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -44,7 +44,14 @@
 
 			mmcclk: mmcclk {
 				compatible = "fixed-clock";
-				clock-frequency = <50000000>;
+				/*
+				 * DW sdio controller has external ciu clock divider
+				 * controlled via register in SDIO IP. It divides
+				 * sdio_ref_clk (which comes from CGU) by 16 for
+				 * default. So default mmcclk clock (which comes
+				 * to sdk_in) is 25000000 Hz.
+				 */
+				clock-frequency = <25000000>;
 				#clock-cells = <0>;
 			};
 

arch/arc/boot/dts/hsdk.dts

@@ -12,6 +12,7 @@
 /dts-v1/;
 
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
 
 / {
 	model = "snps,hsdk";
@@ -57,10 +58,10 @@
 		};
 	};
 
-	core_clk: core-clk {
+	input_clk: input-clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
+		clock-frequency = <33333333>;
 	};
 
 	cpu_intc: cpu-interrupt-controller {
@@ -102,6 +103,19 @@
 
 		ranges = <0x00000000 0xf0000000 0x10000000>;
 
+		cgu_rst: reset-controller@8a0 {
+			compatible = "snps,hsdk-reset";
+			#reset-cells = <1>;
+			reg = <0x8A0 0x4>, <0xFF0 0x4>;
+		};
+
+		core_clk: core-clk@0 {
+			compatible = "snps,hsdk-core-pll-clock";
+			reg = <0x00 0x10>, <0x14B8 0x4>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+		};
+
 		serial: serial@5000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x5000 0x100>;
@@ -120,7 +134,17 @@
 
 		mmcclk_ciu: mmcclk-ciu {
 			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+			/*
+			 * DW sdio controller has external ciu clock divider
+			 * controlled via register in SDIO IP. Due to its
+			 * unexpected default value (it should devide by 1
+			 * but it devides by 8) SDIO IP uses wrong clock and
+			 * works unstable (see STAR 9001204800)
+			 * So add temporary fix and change clock frequency
+			 * from 100000000 to 12500000 Hz until we fix dw sdio
+			 * driver itself.
+			 */
+			clock-frequency = <12500000>;
 			#clock-cells = <0>;
 		};
 
@@ -141,6 +165,8 @@
 			clocks = <&gmacclk>;
 			clock-names = "stmmaceth";
 			phy-handle = <&phy0>;
+			resets = <&cgu_rst HSDK_ETH_RESET>;
+			reset-names = "stmmaceth";
 
 			mdio {
 				#address-cells = <1>;

arch/arc/configs/axs101_defconfig

@@ -105,7 +105,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/axs103_defconfig

@@ -104,7 +104,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/axs103_smp_defconfig

@@ -107,7 +107,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/haps_hs_smp_defconfig

@@ -84,5 +84,5 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/hsdk_defconfig

@@ -63,6 +63,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_HSDK=y
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -72,7 +73,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/vdk_hs38_defconfig

@@ -94,7 +94,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -98,7 +98,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/include/asm/arcregs.h

@@ -98,6 +98,7 @@
 
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
+#define AUX_EXEC_CTRL		8
 #define AUX_INTR_VEC_BASE	0x25
 #define AUX_VOL			0x5e
 
@@ -135,12 +136,12 @@ struct bcr_identity {
 #endif
 };
 
-struct bcr_isa {
+struct bcr_isa_arcv2 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1,
-		     pad1:11, atomic1:1, ver:8;
+		     pad1:12, ver:8;
 #else
-	unsigned int ver:8, atomic1:1, pad1:11, be:1, atomic:1, unalign:1,
+	unsigned int ver:8, pad1:12, be:1, atomic:1, unalign:1,
 		     ldd:1, pad2:4, div_rem:4;
 #endif
 };
@@ -263,13 +264,13 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_mmu mmu;
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
-	struct bcr_isa isa;
+	struct bcr_isa_arcv2 isa;
 	const char *details, *name;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
-			     fpu_sp:1, fpu_dp:1, pad2:6,
+			     fpu_sp:1, fpu_dp:1, dual_iss_enb:1, dual_iss_exist:1, pad2:4,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;

arch/arc/include/asm/processor.h

@@ -78,9 +78,6 @@ struct task_struct;
 
 #endif
 
-#define copy_segments(tsk, mm)      do { } while (0)
-#define release_segments(mm)        do { } while (0)
-
 #define KSTK_EIP(tsk)   (task_pt_regs(tsk)->ret)
 #define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)
 

arch/arc/kernel/setup.c

@@ -51,6 +51,7 @@ static const struct id_to_str arc_cpu_rel[] = {
 	{ 0x51, "R2.0" },
 	{ 0x52, "R2.1" },
 	{ 0x53, "R3.0" },
+	{ 0x54, "R4.0" },
 #endif
 	{ 0x00, NULL   }
 };
@@ -62,6 +63,7 @@ static const struct id_to_str arc_cpu_nm[] = {
 #else
 	{ 0x40, "ARC EM"  },
 	{ 0x50, "ARC HS38"  },
+	{ 0x54, "ARC HS48"  },
 #endif
 	{ 0x00, "Unknown"   }
 };
@@ -119,11 +121,11 @@ static void read_arc_build_cfg_regs(void)
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	const struct id_to_str *tbl;
+	struct bcr_isa_arcv2 isa;
 
 	FIX_PTR(cpu);
 
 	READ_BCR(AUX_IDENTITY, cpu->core);
-	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
 	for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
 		if (cpu->core.family == tbl->id) {
@@ -133,7 +135,7 @@ static void read_arc_build_cfg_regs(void)
 	}
 
 	for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
-		if ((cpu->core.family & 0xF0) == tbl->id)
+		if ((cpu->core.family & 0xF4) == tbl->id)
 			break;
 	}
 	cpu->name = tbl->str;
@@ -192,6 +194,14 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.full = bpu.ft;
 		cpu->bpu.num_cache = 256 << bpu.bce;
 		cpu->bpu.num_pred = 2048 << bpu.pte;
+
+		if (cpu->core.family >= 0x54) {
+			unsigned int exec_ctrl;
+
+			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
+			cpu->extn.dual_iss_exist = 1;
+			cpu->extn.dual_iss_enb = exec_ctrl & 1;
+		}
 	}
 
 	READ_BCR(ARC_REG_AP_BCR, bcr);
@@ -205,18 +215,25 @@ static void read_arc_build_cfg_regs(void)
 
 	cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
 
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
+
 	/* some hacks for lack of feature BCR info in old ARC700 cores */
 	if (is_isa_arcompact()) {
-		if (!cpu->isa.ver)	/* ISA BCR absent, use Kconfig info */
+		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
 			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-		else
-			cpu->isa.atomic = cpu->isa.atomic1;
+		else {
+			/* ARC700_BUILD only has 2 bits of isa info */
+			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
+			cpu->isa.atomic = bcr.info & 1;
+		}
 
 		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
 
 		 /* there's no direct way to distinguish 750 vs. 770 */
 		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
 			cpu->name = "ARC750";
+	} else {
+		cpu->isa = isa;
 	}
 }
 
@@ -232,10 +249,11 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
 		       core->family, core->cpu_id, core->chip_id);
 
-	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s\n",
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
 		       cpu_id, cpu->name, cpu->details,
 		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
-		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"));
+		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(cpu->extn.dual_iss_exist, cpu->extn.dual_iss_enb, " Dual-Issue"));
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
 		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),

arch/arc/plat-axs10x/axs10x.c

@@ -111,6 +111,13 @@ static void __init axs10x_early_init(void)
 
 	axs10x_enable_gpio_intc_wire();
 
+	/*
+	 * Reset ethernet IP core.
+	 * TODO: get rid of this quirk after axs10x reset driver (or simple
+	 * reset driver) will be available in upstream.
+	 */
+	iowrite32((1 << 5), (void __iomem *) CREG_MB_SW_RESET);
+
 	scnprintf(mb, 32, "MainBoard v%d", mb_rev);
 	axs10x_print_board_ver(CREG_MB_VER, mb);
 }

arch/arc/plat-hsdk/Kconfig

@@ -6,4 +6,5 @@
 #
 
 menuconfig ARC_SOC_HSDK
-       bool "ARC HS Development Kit SOC"
+	bool "ARC HS Development Kit SOC"
+	select CLK_HSDK

arch/arc/plat-hsdk/platform.c

@@ -38,6 +38,42 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
 #define CREG_PAE		(CREG_BASE + 0x180)
 #define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
 
+#define CREG_CORE_IF_CLK_DIV	(CREG_BASE + 0x4B8)
+#define CREG_CORE_IF_CLK_DIV_2	0x1
+#define CGU_BASE		ARC_PERIPHERAL_BASE
+#define CGU_PLL_STATUS		(ARC_PERIPHERAL_BASE + 0x4)
+#define CGU_PLL_CTRL		(ARC_PERIPHERAL_BASE + 0x0)
+#define CGU_PLL_STATUS_LOCK	BIT(0)
+#define CGU_PLL_STATUS_ERR	BIT(1)
+#define CGU_PLL_CTRL_1GHZ	0x3A10
+#define HSDK_PLL_LOCK_TIMEOUT	500
+
+#define HSDK_PLL_LOCKED() \
+	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
+
+#define HSDK_PLL_ERR() \
+	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
+
+static void __init hsdk_set_cpu_freq_1ghz(void)
+{
+	u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
+
+	/*
+	 * As we set cpu clock which exceeds 500MHz, the divider for the interface
+	 * clock must be programmed to div-by-2.
+	 */
+	iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
+
+	/* Set cpu clock to 1GHz */
+	iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
+
+	while (!HSDK_PLL_LOCKED() && timeout--)
+		cpu_relax();
+
+	if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
+		pr_err("Failed to setup CPU frequency to 1GHz!");
+}
+
 static void __init hsdk_init_early(void)
 {
 	/*
@@ -52,6 +88,12 @@ static void __init hsdk_init_early(void)
 
 	/* Really apply settings made above */
 	writel(1, (void __iomem *) CREG_PAE_UPDATE);
+
+	/*
+	 * Setup CPU frequency to 1GHz.
+	 * TODO: remove it after smart hsdk pll driver will be introduced.
+	 */
+	hsdk_set_cpu_freq_1ghz();
 }
 
 static const char *hsdk_compat[] __initconst = {

arch/arm/boot/dts/am33xx.dtsi

@@ -36,6 +36,8 @@
 		phy1 = &usb1_phy;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	cpus {

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -388,6 +388,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -402,11 +403,6 @@
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
 &phy_sel {
 	rmii-clock-ext;
 };

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -67,7 +67,10 @@
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
@@ -120,7 +123,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
 				atmel,use-dma-rx;
-				atmel-use-dma-tx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -178,7 +181,7 @@
 			uart4: serial@fc00c000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				pinctrl-name = "default";
+				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
 				status = "okay";
 			};
@@ -330,7 +333,7 @@
 				};
 
 				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PA27__GPIO>,
+					pinmux = <PIN_PA10__GPIO>,
 						 <PIN_PB1__GPIO>,
 						 <PIN_PA31__GPIO>;
 					bias-pull-up;
@@ -396,7 +399,7 @@
 				};
 
 				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PA10__GPIO>,
+					pinmux = <PIN_PA27__GPIO>,
 						 <PIN_PD19__GPIO>;
 					bias-disable;
 				};
@@ -520,17 +523,17 @@
 
 		red {
 			label = "red";
-			gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
 			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};

arch/arm/boot/dts/da850-evm.dts

@@ -15,6 +15,13 @@
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
 	soc@1c00000 {
 		pmx_core: pinmux@14120 {
 			status = "okay";

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -1817,6 +1817,8 @@
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1868>;
+		assigned-clocks = <&mcasp3_ahclkx_mux>;
+		assigned-clock-parents = <&abe_24m_fclk>;
 	};
 
 	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {

arch/arm/boot/dts/omap3-n900.dts

@@ -144,15 +144,6 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	rear_camera: camera@0 {
-		compatible = "linux,camera";
-
-		module {
-			model = "TCM8341MD";
-			sensor = <&cam1>;
-		};
-	};
-
 	pwm9: dmtimer-pwm {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
@@ -189,10 +180,8 @@
 				clock-lanes = <1>;
 				data-lanes = <0>;
 				lane-polarity = <0 0>;
-				clock-inv = <0>;
 				/* Select strobe = <1> for back camera, <0> for front camera */
 				strobe = <1>;
-				crc = <0>;
 			};
 		};
 	};

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -267,15 +267,19 @@
 	clock-frequency = <400000>;
 
 	as3645a@30 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x30>;
 		compatible = "ams,as3645a";
-		flash {
+		flash@0 {
+			reg = <0x0>;
 			flash-timeout-us = <150000>;
 			flash-max-microamp = <320000>;
 			led-max-microamp = <60000>;
-			peak-current-limit = <1750000>;
+			ams,input-max-microamp = <1750000>;
 		};
-		indicator {
+		indicator@1 {
+			reg = <0x1>;
 			led-max-microamp = <10000>;
 		};
 	};

arch/arm/boot/dts/stm32429i-eval.dts

@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -202,10 +203,8 @@
 	stmpe1600: stmpe1600@42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-		irq-gpio = <&gpioi 8 0>;
-		irq-trigger = <3>;
 		interrupts = <8 3>;
-		interrupt-parent = <&exti>;
+		interrupt-parent = <&gpioi>;
 		interrupt-controller;
 		wakeup-source;
 

arch/arm/boot/dts/stm32f4-pinctrl.dtsi

@@ -0,0 +1,343 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3@0 {
+				pins1 {
+					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+					bias-disable;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg_fs@0 {
+				pins {
+					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
+						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg_fs@1 {
+				pins {
+					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
+						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg_hs@0 {
+				pins {
+					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet_mii: mii@0 {
+				pins {
+					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+						 <STM32F429_PA2_FUNC_ETH_MDIO>,
+						 <STM32F429_PC1_FUNC_ETH_MDC>,
+						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+					slew-rate = <2>;
+				};
+			};
+
+			adc3_in8_pin: adc@200 {
+				pins {
+					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+				};
+			};
+
+			pwm1_pins: pwm@1 {
+				pins {
+					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
+						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
+				};
+			};
+
+			pwm3_pins: pwm@3 {
+				pins {
+					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+						 <STM32F429_PB5_FUNC_TIM3_CH2>;
+				};
+			};
+
+			i2c1_pins: i2c1@0 {
+				pins {
+					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+						 <STM32F429_PB6_FUNC_I2C1_SCL>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			ltdc_pins: ltdc@0 {
+				pins {
+					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
+						 <STM32F429_PI14_FUNC_LCD_CLK>,
+						 <STM32F429_PI15_FUNC_LCD_R0>,
+						 <STM32F429_PJ0_FUNC_LCD_R1>,
+						 <STM32F429_PJ1_FUNC_LCD_R2>,
+						 <STM32F429_PJ2_FUNC_LCD_R3>,
+						 <STM32F429_PJ3_FUNC_LCD_R4>,
+						 <STM32F429_PJ4_FUNC_LCD_R5>,
+						 <STM32F429_PJ5_FUNC_LCD_R6>,
+						 <STM32F429_PJ6_FUNC_LCD_R7>,
+						 <STM32F429_PJ7_FUNC_LCD_G0>,
+						 <STM32F429_PJ8_FUNC_LCD_G1>,
+						 <STM32F429_PJ9_FUNC_LCD_G2>,
+						 <STM32F429_PJ10_FUNC_LCD_G3>,
+						 <STM32F429_PJ11_FUNC_LCD_G4>,
+						 <STM32F429_PJ12_FUNC_LCD_B0>,
+						 <STM32F429_PJ13_FUNC_LCD_B1>,
+						 <STM32F429_PJ14_FUNC_LCD_B2>,
+						 <STM32F429_PJ15_FUNC_LCD_B3>,
+						 <STM32F429_PK0_FUNC_LCD_G5>,
+						 <STM32F429_PK1_FUNC_LCD_G6>,
+						 <STM32F429_PK2_FUNC_LCD_G7>,
+						 <STM32F429_PK3_FUNC_LCD_B4>,
+						 <STM32F429_PK4_FUNC_LCD_B5>,
+						 <STM32F429_PK5_FUNC_LCD_B6>,
+						 <STM32F429_PK6_FUNC_LCD_B7>,
+						 <STM32F429_PK7_FUNC_LCD_DE>;
+					slew-rate = <2>;
+				};
+			};
+
+			dcmi_pins: dcmi@0 {
+				pins {
+					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F429_PC6_FUNC_DCMI_D0>,
+						 <STM32F429_PC7_FUNC_DCMI_D1>,
+						 <STM32F429_PC8_FUNC_DCMI_D2>,
+						 <STM32F429_PC9_FUNC_DCMI_D3>,
+						 <STM32F429_PC11_FUNC_DCMI_D4>,
+						 <STM32F429_PD3_FUNC_DCMI_D5>,
+						 <STM32F429_PB8_FUNC_DCMI_D6>,
+						 <STM32F429_PE6_FUNC_DCMI_D7>,
+						 <STM32F429_PC10_FUNC_DCMI_D8>,
+						 <STM32F429_PC12_FUNC_DCMI_D9>,
+						 <STM32F429_PD6_FUNC_DCMI_D10>,
+						 <STM32F429_PD2_FUNC_DCMI_D11>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/stm32f429-disco.dts

@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {

arch/arm/boot/dts/stm32f429-pinctrl.dtsi

@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f429-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/stm32f429.dtsi

@@ -47,7 +47,6 @@
 
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f4-rcc.h>
 
@@ -591,302 +590,6 @@
 			status = "disabled";
 		};
 
-		pinctrl: pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32f429-pinctrl";
-			ranges = <0 0x40020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
-				st,bank-name = "GPIOC";
-			};
-
-			gpiod: gpio@40020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
-				st,bank-name = "GPIOD";
-			};
-
-			gpioe: gpio@40021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
-				st,bank-name = "GPIOE";
-			};
-
-			gpiof: gpio@40021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
-				st,bank-name = "GPIOF";
-			};
-
-			gpiog: gpio@40021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
-				st,bank-name = "GPIOG";
-			};
-
-			gpioh: gpio@40021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
-				st,bank-name = "GPIOH";
-			};
-
-			gpioi: gpio@40022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
-				st,bank-name = "GPIOI";
-			};
-
-			gpioj: gpio@40022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
-				st,bank-name = "GPIOJ";
-			};
-
-			gpiok: gpio@40022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
-				st,bank-name = "GPIOK";
-			};
-
-			usart1_pins_a: usart1@0 {
-				pins1 {
-					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
-					bias-disable;
-				};
-			};
-
-			usart3_pins_a: usart3@0 {
-				pins1 {
-					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
-					bias-disable;
-				};
-			};
-
-			usbotg_fs_pins_a: usbotg_fs@0 {
-				pins {
-					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
-						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
-						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_fs_pins_b: usbotg_fs@1 {
-				pins {
-					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
-						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
-						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg_hs@0 {
-				pins {
-					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
-						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
-						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
-						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
-						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
-						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
-						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
-						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
-						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
-						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
-						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
-						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			ethernet_mii: mii@0 {
-				pins {
-					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
-						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
-						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
-						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
-						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
-						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
-						 <STM32F429_PA2_FUNC_ETH_MDIO>,
-						 <STM32F429_PC1_FUNC_ETH_MDC>,
-						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
-						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
-						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
-						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
-						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
-						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
-					slew-rate = <2>;
-				};
-			};
-
-			adc3_in8_pin: adc@200 {
-				pins {
-					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
-				};
-			};
-
-			pwm1_pins: pwm@1 {
-				pins {
-					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
-						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
-						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
-				};
-			};
-
-			pwm3_pins: pwm@3 {
-				pins {
-					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
-						 <STM32F429_PB5_FUNC_TIM3_CH2>;
-				};
-			};
-
-			i2c1_pins: i2c1@0 {
-				pins {
-					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
-						 <STM32F429_PB6_FUNC_I2C1_SCL>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <3>;
-				};
-			};
-
-			ltdc_pins: ltdc@0 {
-				pins {
-					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
-						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
-						 <STM32F429_PI14_FUNC_LCD_CLK>,
-						 <STM32F429_PI15_FUNC_LCD_R0>,
-						 <STM32F429_PJ0_FUNC_LCD_R1>,
-						 <STM32F429_PJ1_FUNC_LCD_R2>,
-						 <STM32F429_PJ2_FUNC_LCD_R3>,
-						 <STM32F429_PJ3_FUNC_LCD_R4>,
-						 <STM32F429_PJ4_FUNC_LCD_R5>,
-						 <STM32F429_PJ5_FUNC_LCD_R6>,
-						 <STM32F429_PJ6_FUNC_LCD_R7>,
-						 <STM32F429_PJ7_FUNC_LCD_G0>,
-						 <STM32F429_PJ8_FUNC_LCD_G1>,
-						 <STM32F429_PJ9_FUNC_LCD_G2>,
-						 <STM32F429_PJ10_FUNC_LCD_G3>,
-						 <STM32F429_PJ11_FUNC_LCD_G4>,
-						 <STM32F429_PJ12_FUNC_LCD_B0>,
-						 <STM32F429_PJ13_FUNC_LCD_B1>,
-						 <STM32F429_PJ14_FUNC_LCD_B2>,
-						 <STM32F429_PJ15_FUNC_LCD_B3>,
-						 <STM32F429_PK0_FUNC_LCD_G5>,
-						 <STM32F429_PK1_FUNC_LCD_G6>,
-						 <STM32F429_PK2_FUNC_LCD_G7>,
-						 <STM32F429_PK3_FUNC_LCD_B4>,
-						 <STM32F429_PK4_FUNC_LCD_B5>,
-						 <STM32F429_PK5_FUNC_LCD_B6>,
-						 <STM32F429_PK6_FUNC_LCD_B7>,
-						 <STM32F429_PK7_FUNC_LCD_DE>;
-					slew-rate = <2>;
-				};
-			};
-
-			dcmi_pins: dcmi@0 {
-				pins {
-					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
-						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
-						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
-						 <STM32F429_PC6_FUNC_DCMI_D0>,
-						 <STM32F429_PC7_FUNC_DCMI_D1>,
-						 <STM32F429_PC8_FUNC_DCMI_D2>,
-						 <STM32F429_PC9_FUNC_DCMI_D3>,
-						 <STM32F429_PC11_FUNC_DCMI_D4>,
-						 <STM32F429_PD3_FUNC_DCMI_D5>,
-						 <STM32F429_PB8_FUNC_DCMI_D6>,
-						 <STM32F429_PE6_FUNC_DCMI_D7>,
-						 <STM32F429_PC10_FUNC_DCMI_D8>,
-						 <STM32F429_PC12_FUNC_DCMI_D9>,
-						 <STM32F429_PD6_FUNC_DCMI_D10>,
-						 <STM32F429_PD2_FUNC_DCMI_D11>;
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-			};
-		};
-
 		crc: crc@40023000 {
 			compatible = "st,stm32f4-crc";
 			reg = <0x40023000 0x400>;

arch/arm/boot/dts/stm32f469-disco.dts

@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f469-pinctrl.dtsi"
 
 / {
 	model = "STMicroelectronics STM32F469i-DISCO board";

arch/arm/boot/dts/stm32f469-pinctrl.dtsi

@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f469-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 6>,
+					      <&pinctrl 12 156 4>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 3 163 5>;
+			};
+		};
+	};
+};

arch/arm/configs/gemini_defconfig

@@ -32,6 +32,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_PATA_FTIDE010=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -55,8 +56,8 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GEMINI=y
 CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y

arch/arm/configs/pxa_defconfig

@@ -471,7 +471,7 @@ CONFIG_LCD_PLATFORM=m
 CONFIG_LCD_TOSA=m
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_TOSA=m
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m

arch/arm/configs/viper_defconfig

@@ -113,7 +113,7 @@ CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_PWM=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m

arch/arm/configs/zeus_defconfig

@@ -112,7 +112,7 @@ CONFIG_FB_PXA=m
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m

arch/arm/include/asm/thread_info.h

@@ -139,11 +139,10 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_FSCHECK		4	/* Check FS is USER_DS on return */
-#define TIF_SYSCALL_TRACE	5	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	6	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	7	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		8	/* seccomp syscall filtering active */
+#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
 
 #define TIF_NOHZ		12	/* in adaptive nohz mode */
 #define TIF_USING_IWMMXT	17
@@ -154,7 +153,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
-#define _TIF_FSCHECK		(1 << TIF_FSCHECK)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
@@ -168,9 +166,8 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 /*
  * Change these and you break ASM code in entry-common.S
  */
-#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING |	\
-				 _TIF_NOTIFY_RESUME | _TIF_UPROBE |	\
-				 _TIF_FSCHECK)
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+				 _TIF_NOTIFY_RESUME | _TIF_UPROBE)
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_THREAD_INFO_H */

arch/arm/include/asm/uaccess.h

@@ -70,8 +70,6 @@ static inline void set_fs(mm_segment_t fs)
 {
 	current_thread_info()->addr_limit = fs;
 	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-	/* On user-mode return, check fs is correct */
-	set_thread_flag(TIF_FSCHECK);
 }
 
 #define segment_eq(a, b)	((a) == (b))

arch/arm/kernel/entry-common.S

@@ -12,6 +12,7 @@
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
 #include <asm/unwind.h>
+#include <asm/memory.h>
 #ifdef CONFIG_AEABI
 #include <asm/unistd-oabi.h>
 #endif
@@ -48,12 +49,14 @@ ret_fast_syscall:
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)
 	disable_irq_notrace			@ disable interrupts
+	ldr	r2, [tsk, #TI_ADDR_LIMIT]
+	cmp	r2, #TASK_SIZE
+	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
-	tst	r1, #_TIF_SYSCALL_WORK
-	bne	fast_work_pending
-	tst	r1, #_TIF_WORK_MASK
+	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
 	bne	fast_work_pending
 
+
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
@@ -76,16 +79,16 @@ ret_fast_syscall:
  UNWIND(.cantunwind	)
 	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
 	disable_irq_notrace			@ disable interrupts
+	ldr	r2, [tsk, #TI_ADDR_LIMIT]
+	cmp	r2, #TASK_SIZE
+	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
-	tst	r1, #_TIF_SYSCALL_WORK
-	bne	fast_work_pending
-	tst	r1, #_TIF_WORK_MASK
+	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
 	beq	no_work_pending
  UNWIND(.fnend		)
 ENDPROC(ret_fast_syscall)
 
 	/* Slower path - fall through to work_pending */
-fast_work_pending:
 #endif
 
 	tst	r1, #_TIF_SYSCALL_WORK
@@ -111,6 +114,9 @@ ENTRY(ret_to_user)
 ret_slow_syscall:
 	disable_irq_notrace			@ disable interrupts
 ENTRY(ret_to_user_from_irq)
+	ldr	r2, [tsk, #TI_ADDR_LIMIT]
+	cmp	r2, #TASK_SIZE
+	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
 	bne	slow_work_pending

arch/arm/kernel/signal.c

@@ -614,10 +614,6 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	 * Update the trace code with the current status.
 	 */
 	trace_hardirqs_off();
-
-	/* Check valid user FS if needed */
-	addr_limit_user_check();
-
 	do {
 		if (likely(thread_flags & _TIF_NEED_RESCHED)) {
 			schedule();
@@ -678,3 +674,9 @@ struct page *get_signal_page(void)
 
 	return page;
 }
+
+/* Defer to generic check */
+asmlinkage void addr_limit_check_failed(void)
+{
+	addr_limit_user_check();
+}

arch/arm/mach-at91/pm.c

@@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void)
 	}
 
 	pm_bu->suspended = 0;
-	pm_bu->canary = virt_to_phys(&canary);
-	pm_bu->resume = virt_to_phys(cpu_resume);
+	pm_bu->canary = __pa_symbol(&canary);
+	pm_bu->resume = __pa_symbol(cpu_resume);
 
 	return;
 

arch/arm/mach-omap2/hsmmc.c

@@ -58,10 +58,10 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 	struct platform_device *pdev;
 	int res;
 
-	if (omap_hsmmc_done != 1)
+	if (omap_hsmmc_done)
 		return;
 
-	omap_hsmmc_done++;
+	omap_hsmmc_done = 1;
 
 	for (; c->mmc; c++) {
 		pdev = c->pdev;

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -839,6 +839,7 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
 	.name		= "gpio1",
 	.class		= &dra7xx_gpio_hwmod_class,
 	.clkdm_name	= "wkupaon_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.main_clk	= "wkupaon_iclk_mux",
 	.prcm = {
 		.omap4 = {

arch/arm64/Makefile

@@ -50,17 +50,22 @@ KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
 KBUILD_CFLAGS	+= $(call cc-option, -mpc-relative-literal-loads)
 KBUILD_AFLAGS	+= $(lseinstr) $(brokengasinst)
 
+KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
+KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 CHECKFLAGS	+= -D__AARCH64EB__
 AS		+= -EB
 LD		+= -EB
+LDFLAGS		+= -maarch64linuxb
 UTS_MACHINE	:= aarch64_be
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
 CHECKFLAGS	+= -D__AARCH64EL__
 AS		+= -EL
 LD		+= -EL
+LDFLAGS		+= -maarch64linux
 UTS_MACHINE	:= aarch64
 endif
 

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -168,7 +168,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -194,7 +195,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -212,10 +214,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

@@ -107,6 +107,9 @@
 
 		states = <3300000 0>,
 		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
 	};
 
 	wifi_32k: wifi-32k {
@@ -250,7 +253,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -276,11 +280,16 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <100000000>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
 	disable-wp;
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
@@ -294,10 +303,10 @@
 &sd_emmc_c {
 	status = "disabled";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -51,7 +51,7 @@
 / {
 	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
 	model = "NEXBOX A95X";
-	
+
 	aliases {
 		serial0 = &uart_AO;
 	};
@@ -232,7 +232,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -253,7 +254,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -271,10 +273,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -50,7 +50,7 @@
 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
 	model = "Hardkernel ODROID-C2";
-	
+
 	aliases {
 		serial0 = &uart_AO;
 	};
@@ -253,7 +253,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -271,10 +272,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -194,7 +194,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -220,10 +221,14 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -238,10 +243,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -155,7 +155,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -181,7 +182,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -198,10 +200,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -392,6 +392,17 @@
 			};
 		};
 
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "BOOT_8";
+				bias-pull-down;
+			};
+		};
+
 		nor_pins: nor {
 			mux {
 				groups = "nor_d",
@@ -430,6 +441,17 @@
 			};
 		};
 
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "CARD_2";
+				bias-pull-down;
+			};
+		};
+
 		sdio_pins: sdio {
 			mux {
 				groups = "sdio_d0",
@@ -442,6 +464,17 @@
 			};
 		};
 
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "GPIOX_4";
+				bias-pull-down;
+			};
+		};
+
 		sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
@@ -661,21 +694,21 @@
 
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_b {
 	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_c {
 	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts

@@ -123,7 +123,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -141,10 +142,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <100000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

@@ -91,6 +91,9 @@
 
 		states = <3300000 0>,
 			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
 	};
 
 	vddio_boot: regulator-vddio_boot {
@@ -197,10 +200,14 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
@@ -215,10 +222,12 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-3_3v;
 	max-frequency = <50000000>;
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -189,7 +189,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -210,7 +211,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -228,10 +230,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi

@@ -95,7 +95,8 @@
 &sd_emmc_a {
 	status = "okay";
 	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
 	#size-cells = <0>;
 
@@ -116,7 +117,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -134,10 +136,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -281,6 +281,17 @@
 			};
 		};
 
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "BOOT_8";
+				bias-pull-down;
+			};
+		};
+
 		nor_pins: nor {
 			mux {
 				groups = "nor_d",
@@ -319,6 +330,17 @@
 			};
 		};
 
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "CARD_2";
+				bias-pull-down;
+			};
+		};
+
 		sdio_pins: sdio {
 			mux {
 				groups = "sdio_d0",
@@ -331,6 +353,17 @@
 			};
 		};
 
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+			};
+			cfg-pull-down {
+				pins = "GPIOX_4";
+				bias-pull-down;
+			};
+		};
+
 		sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
@@ -603,21 +636,21 @@
 
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_b {
 	clocks = <&clkc CLKID_SD_EMMC_B>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
        clock-names = "core", "clkin0", "clkin1";
 };
 
 &sd_emmc_c {
 	clocks = <&clkc CLKID_SD_EMMC_C>,
-		 <&xtal>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
 		 <&clkc CLKID_FCLK_DIV2>;
 	clock-names = "core", "clkin0", "clkin1";
 };

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

@@ -175,7 +175,8 @@
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <4>;
 	cap-sd-highspeed;
@@ -193,10 +194,10 @@
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts

@@ -220,7 +220,6 @@
 	pinctrl-names = "default";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	max-frequency = <200000000>;
 	non-removable;

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -254,7 +254,7 @@
 
 			ap_syscon: system-controller@6f4000 {
 				compatible = "syscon", "simple-mfd";
-				reg = <0x6f4000 0x1000>;
+				reg = <0x6f4000 0x2000>;
 
 				ap_clk: clock {
 					compatible = "marvell,ap806-clock";
@@ -265,7 +265,7 @@
 					compatible = "marvell,ap806-pinctrl";
 				};
 
-				ap_gpio: gpio {
+				ap_gpio: gpio@1040 {
 					compatible = "marvell,armada-8k-gpio";
 					offset = <0x1040>;
 					ngpios = <20>;

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -113,8 +113,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
+
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -123,8 +122,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -132,8 +129,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -141,8 +136,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKL>;
-			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -150,8 +143,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
+
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -160,8 +152,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b2: cpu@102 {
@@ -169,8 +159,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu_b3: cpu@103 {
@@ -178,62 +166,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
-			clocks = <&cru ARMCLKB>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-	};
-
-	cluster0_opp: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <950000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <1025000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cluster1_opp: opp-table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <312000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <40000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000>;
-		};
-		opp02 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <950000>;
-		};
-		opp03 {
-			opp-hz = /bits/ 64 <816000000>;
-			opp-microvolt = <975000>;
-		};
-		opp04 {
-			opp-hz = /bits/ 64 <1008000000>;
-			opp-microvolt = <1050000>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1629,9 +1629,9 @@
 		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x8000>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
-			 <&cru SCLK_DPHY_TX0_CFG>;
-		clock-names = "ref", "pclk", "phy_cfg";
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
 		power-domains = <&power RK3399_PD_VIO>;
 		rockchip,grf = <&grf>;
 		status = "disabled";

arch/arm64/include/asm/linkage.h

@@ -1,7 +1,7 @@
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
-#define __ALIGN		.align 4
-#define __ALIGN_STR	".align 4"
+#define __ALIGN		.align 2
+#define __ALIGN_STR	".align 2"
 
 #endif

arch/arm64/include/asm/memory.h

@@ -95,16 +95,19 @@
 #define KERNEL_END        _end
 
 /*
- * The size of the KASAN shadow region. This should be 1/8th of the
- * size of the entire kernel virtual address space.
+ * KASAN requires 1/8th of the kernel virtual address space for the shadow
+ * region. KASAN can bloat the stack significantly, so double the (minimum)
+ * stack size when KASAN is in use.
  */
 #ifdef CONFIG_KASAN
 #define KASAN_SHADOW_SIZE	(UL(1) << (VA_BITS - 3))
+#define KASAN_THREAD_SHIFT	1
 #else
 #define KASAN_SHADOW_SIZE	(0)
+#define KASAN_THREAD_SHIFT	0
 #endif
 
-#define MIN_THREAD_SHIFT	14
+#define MIN_THREAD_SHIFT	(14 + KASAN_THREAD_SHIFT)
 
 /*
  * VMAP'd stacks are allocated at page granularity, so we must ensure that such

arch/arm64/include/asm/pgtable.h

@@ -401,7 +401,7 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
 /* Find an entry in the third-level page table. */
 #define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
-#define pte_offset_phys(dir,addr)	(pmd_page_paddr(*(dir)) + pte_index(addr) * sizeof(pte_t))
+#define pte_offset_phys(dir,addr)	(pmd_page_paddr(READ_ONCE(*(dir))) + pte_index(addr) * sizeof(pte_t))
 #define pte_offset_kernel(dir,addr)	((pte_t *)__va(pte_offset_phys((dir), (addr))))
 
 #define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))

arch/arm64/kernel/armv8_deprecated.c

@@ -649,4 +649,4 @@ static int __init armv8_deprecated_init(void)
 	return 0;
 }
 
-late_initcall(armv8_deprecated_init);
+core_initcall(armv8_deprecated_init);

arch/arm64/kernel/cpufeature.c

@@ -1307,4 +1307,4 @@ static int __init enable_mrs_emulation(void)
 	return 0;
 }
 
-late_initcall(enable_mrs_emulation);
+core_initcall(enable_mrs_emulation);

arch/arm64/kernel/fpsimd.c

@@ -321,6 +321,8 @@ void kernel_neon_end(void)
 }
 EXPORT_SYMBOL(kernel_neon_end);
 
+#ifdef CONFIG_EFI
+
 static DEFINE_PER_CPU(struct fpsimd_state, efi_fpsimd_state);
 static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
 
@@ -370,6 +372,8 @@ void __efi_fpsimd_end(void)
 		kernel_neon_end();
 }
 
+#endif /* CONFIG_EFI */
+
 #endif /* CONFIG_KERNEL_MODE_NEON */
 
 #ifdef CONFIG_CPU_PM
@@ -440,4 +444,4 @@ static int __init fpsimd_init(void)
 
 	return 0;
 }
-late_initcall(fpsimd_init);
+core_initcall(fpsimd_init);

arch/arm64/kernel/head.S

@@ -384,6 +384,7 @@ ENTRY(kimage_vaddr)
  * booted in EL1 or EL2 respectively.
  */
 ENTRY(el2_setup)
+	msr	SPsel, #1			// We want to use SP_EL{1,2}
 	mrs	x0, CurrentEL
 	cmp	x0, #CurrentEL_EL2
 	b.eq	1f

arch/arm64/kernel/signal.c

@@ -751,10 +751,10 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
 	 */
 	trace_hardirqs_off();
 
-	/* Check valid user FS if needed */
-	addr_limit_user_check();
-
 	do {
+		/* Check valid user FS if needed */
+		addr_limit_user_check();
+
 		if (thread_flags & _TIF_NEED_RESCHED) {
 			schedule();
 		} else {

arch/arm64/mm/fault.c

@@ -97,7 +97,7 @@ static void data_abort_decode(unsigned int esr)
 			 (esr & ESR_ELx_SF) >> ESR_ELx_SF_SHIFT,
 			 (esr & ESR_ELx_AR) >> ESR_ELx_AR_SHIFT);
 	} else {
-		pr_alert("  ISV = 0, ISS = 0x%08lu\n", esr & ESR_ELx_ISS_MASK);
+		pr_alert("  ISV = 0, ISS = 0x%08lx\n", esr & ESR_ELx_ISS_MASK);
 	}
 
 	pr_alert("  CM = %lu, WnR = %lu\n",
@@ -651,7 +651,7 @@ static const struct fault_info fault_info[] = {
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 0 translation fault"	},
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
 	{ do_bad,		SIGBUS,  0,		"unknown 8"			},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},