MIPS: Netlogic: Remove memory section from built-in DT

Do not pass a memory section in the built-in DTB, and let the
boot code use the values from the DRAM BARs.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5699/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/netlogic/dts/xlp_evp.dts

@@ -9,13 +9,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	memory {
-		device_type = "memory";
-		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
-			0 0x20000000 0 0xa0000000	// 2560M at 512M
-			0 0xe0000000 1 0x00000000>;
-	};
-
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;

arch/mips/netlogic/dts/xlp_svp.dts

@@ -9,13 +9,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	memory {
-		device_type = "memory";
-		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
-			0 0x20000000 0 0xa0000000	// 2560M at 512M
-			0 0xe0000000 0 0x40000000>;
-	};
-
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;