|
@@ -0,0 +1,263 @@
|
|
|
+/*
|
|
|
+ * Copyright (C) 2016 ARM Ltd.
|
|
|
+ * based on the Allwinner H3 dtsi:
|
|
|
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
|
|
|
+ *
|
|
|
+ * This file is dual-licensed: you can use it either under the terms
|
|
|
+ * of the GPL or the X11 license, at your option. Note that this dual
|
|
|
+ * licensing only applies to this file, and not this project as a
|
|
|
+ * whole.
|
|
|
+ *
|
|
|
+ * a) This file is free software; you can redistribute it and/or
|
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
|
+ * published by the Free Software Foundation; either version 2 of the
|
|
|
+ * License, or (at your option) any later version.
|
|
|
+ *
|
|
|
+ * This file is distributed in the hope that it will be useful,
|
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
+ * GNU General Public License for more details.
|
|
|
+ *
|
|
|
+ * Or, alternatively,
|
|
|
+ *
|
|
|
+ * b) Permission is hereby granted, free of charge, to any person
|
|
|
+ * obtaining a copy of this software and associated documentation
|
|
|
+ * files (the "Software"), to deal in the Software without
|
|
|
+ * restriction, including without limitation the rights to use,
|
|
|
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
|
+ * sell copies of the Software, and to permit persons to whom the
|
|
|
+ * Software is furnished to do so, subject to the following
|
|
|
+ * conditions:
|
|
|
+ *
|
|
|
+ * The above copyright notice and this permission notice shall be
|
|
|
+ * included in all copies or substantial portions of the Software.
|
|
|
+ *
|
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
|
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
|
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
|
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
+ * OTHER DEALINGS IN THE SOFTWARE.
|
|
|
+ */
|
|
|
+
|
|
|
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
|
|
|
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
+#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ interrupt-parent = <&gic>;
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ cpus {
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+
|
|
|
+ cpu0: cpu@0 {
|
|
|
+ compatible = "arm,cortex-a53", "arm,armv8";
|
|
|
+ device_type = "cpu";
|
|
|
+ reg = <0>;
|
|
|
+ enable-method = "psci";
|
|
|
+ };
|
|
|
+
|
|
|
+ cpu1: cpu@1 {
|
|
|
+ compatible = "arm,cortex-a53", "arm,armv8";
|
|
|
+ device_type = "cpu";
|
|
|
+ reg = <1>;
|
|
|
+ enable-method = "psci";
|
|
|
+ };
|
|
|
+
|
|
|
+ cpu2: cpu@2 {
|
|
|
+ compatible = "arm,cortex-a53", "arm,armv8";
|
|
|
+ device_type = "cpu";
|
|
|
+ reg = <2>;
|
|
|
+ enable-method = "psci";
|
|
|
+ };
|
|
|
+
|
|
|
+ cpu3: cpu@3 {
|
|
|
+ compatible = "arm,cortex-a53", "arm,armv8";
|
|
|
+ device_type = "cpu";
|
|
|
+ reg = <3>;
|
|
|
+ enable-method = "psci";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ osc24M: osc24M_clk {
|
|
|
+ #clock-cells = <0>;
|
|
|
+ compatible = "fixed-clock";
|
|
|
+ clock-frequency = <24000000>;
|
|
|
+ clock-output-names = "osc24M";
|
|
|
+ };
|
|
|
+
|
|
|
+ osc32k: osc32k_clk {
|
|
|
+ #clock-cells = <0>;
|
|
|
+ compatible = "fixed-clock";
|
|
|
+ clock-frequency = <32768>;
|
|
|
+ clock-output-names = "osc32k";
|
|
|
+ };
|
|
|
+
|
|
|
+ psci {
|
|
|
+ compatible = "arm,psci-0.2";
|
|
|
+ method = "smc";
|
|
|
+ };
|
|
|
+
|
|
|
+ timer {
|
|
|
+ compatible = "arm,armv8-timer";
|
|
|
+ interrupts = <GIC_PPI 13
|
|
|
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
|
+ <GIC_PPI 14
|
|
|
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
|
+ <GIC_PPI 11
|
|
|
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
|
+ <GIC_PPI 10
|
|
|
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
|
+ };
|
|
|
+
|
|
|
+ soc {
|
|
|
+ compatible = "simple-bus";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+ ranges;
|
|
|
+
|
|
|
+ ccu: clock@01c20000 {
|
|
|
+ compatible = "allwinner,sun50i-a64-ccu";
|
|
|
+ reg = <0x01c20000 0x400>;
|
|
|
+ clocks = <&osc24M>, <&osc32k>;
|
|
|
+ clock-names = "hosc", "losc";
|
|
|
+ #clock-cells = <1>;
|
|
|
+ #reset-cells = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ pio: pinctrl@1c20800 {
|
|
|
+ compatible = "allwinner,sun50i-a64-pinctrl";
|
|
|
+ reg = <0x01c20800 0x400>;
|
|
|
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ clocks = <&ccu CLK_BUS_PIO>;
|
|
|
+ gpio-controller;
|
|
|
+ #gpio-cells = <3>;
|
|
|
+ interrupt-controller;
|
|
|
+ #interrupt-cells = <3>;
|
|
|
+
|
|
|
+ i2c1_pins: i2c1_pins {
|
|
|
+ pins = "PH2", "PH3";
|
|
|
+ function = "i2c1";
|
|
|
+ };
|
|
|
+
|
|
|
+ uart0_pins_a: uart0@0 {
|
|
|
+ pins = "PB8", "PB9";
|
|
|
+ function = "uart0";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ uart0: serial@1c28000 {
|
|
|
+ compatible = "snps,dw-apb-uart";
|
|
|
+ reg = <0x01c28000 0x400>;
|
|
|
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ reg-shift = <2>;
|
|
|
+ reg-io-width = <4>;
|
|
|
+ clocks = <&ccu CLK_BUS_UART0>;
|
|
|
+ resets = <&ccu RST_BUS_UART0>;
|
|
|
+ status = "disabled";
|
|
|
+ };
|
|
|
+
|
|
|
+ uart1: serial@1c28400 {
|
|
|
+ compatible = "snps,dw-apb-uart";
|
|
|
+ reg = <0x01c28400 0x400>;
|
|
|
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ reg-shift = <2>;
|
|
|
+ reg-io-width = <4>;
|
|
|
+ clocks = <&ccu CLK_BUS_UART1>;
|
|
|
+ resets = <&ccu RST_BUS_UART1>;
|
|
|
+ status = "disabled";
|
|
|
+ };
|
|
|
+
|
|
|
+ uart2: serial@1c28800 {
|
|
|
+ compatible = "snps,dw-apb-uart";
|
|
|
+ reg = <0x01c28800 0x400>;
|
|
|
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ reg-shift = <2>;
|
|
|
+ reg-io-width = <4>;
|
|
|
+ clocks = <&ccu CLK_BUS_UART2>;
|
|
|
+ resets = <&ccu RST_BUS_UART2>;
|
|
|
+ status = "disabled";
|
|
|
+ };
|
|
|
+
|
|
|
+ uart3: serial@1c28c00 {
|
|
|
+ compatible = "snps,dw-apb-uart";
|
|
|
+ reg = <0x01c28c00 0x400>;
|
|
|
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ reg-shift = <2>;
|
|
|
+ reg-io-width = <4>;
|
|
|
+ clocks = <&ccu CLK_BUS_UART3>;
|
|
|
+ resets = <&ccu RST_BUS_UART3>;
|
|
|
+ status = "disabled";
|
|
|
+ };
|
|
|
+
|
|
|
+ uart4: serial@1c29000 {
|
|
|
+ compatible = "snps,dw-apb-uart";
|
|
|
+ reg = <0x01c29000 0x400>;
|
|
|
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ reg-shift = <2>;
|
|
|
+ reg-io-width = <4>;
|
|
|
+ clocks = <&ccu CLK_BUS_UART4>;
|
|
|
+ resets = <&ccu RST_BUS_UART4>;
|
|
|
+ status = "disabled";
|
|
|
+ };
|
|
|
+
|
|
|
+ i2c0: i2c@1c2ac00 {
|
|
|
+ compatible = "allwinner,sun6i-a31-i2c";
|
|
|
+ reg = <0x01c2ac00 0x400>;
|
|
|
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ clocks = <&ccu CLK_BUS_I2C0>;
|
|
|
+ resets = <&ccu RST_BUS_I2C0>;
|
|
|
+ status = "disabled";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ i2c1: i2c@1c2b000 {
|
|
|
+ compatible = "allwinner,sun6i-a31-i2c";
|
|
|
+ reg = <0x01c2b000 0x400>;
|
|
|
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ clocks = <&ccu CLK_BUS_I2C1>;
|
|
|
+ resets = <&ccu RST_BUS_I2C1>;
|
|
|
+ status = "disabled";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ i2c2: i2c@1c2b400 {
|
|
|
+ compatible = "allwinner,sun6i-a31-i2c";
|
|
|
+ reg = <0x01c2b400 0x400>;
|
|
|
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ clocks = <&ccu CLK_BUS_I2C2>;
|
|
|
+ resets = <&ccu RST_BUS_I2C2>;
|
|
|
+ status = "disabled";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ gic: interrupt-controller@1c81000 {
|
|
|
+ compatible = "arm,gic-400";
|
|
|
+ reg = <0x01c81000 0x1000>,
|
|
|
+ <0x01c82000 0x2000>,
|
|
|
+ <0x01c84000 0x2000>,
|
|
|
+ <0x01c86000 0x2000>;
|
|
|
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
|
+ interrupt-controller;
|
|
|
+ #interrupt-cells = <3>;
|
|
|
+ };
|
|
|
+
|
|
|
+ rtc: rtc@1f00000 {
|
|
|
+ compatible = "allwinner,sun6i-a31-rtc";
|
|
|
+ reg = <0x01f00000 0x54>;
|
|
|
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|