Merge branches 'acpi-init' and 'acpica'

* acpi-init:
  ACPI / init: Fix the ordering of acpi_reserve_resources()

* acpica:
  Revert "ACPICA: Permanently set _REV to the value '2'."

CREDITS

@@ -3709,6 +3709,13 @@ N: Dirk Verworner
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
 N: Riku Voipio
 E: riku.voipio@iki.fi
 D: Author of PCA9532 LED and Fintek f75375s hwmon driver

Documentation/IPMI.txt

@@ -505,7 +505,10 @@ at module load time (for a module) with:
 
 The addresses are normal I2C addresses.  The adapter is the string
 name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself.  Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip.  This is because it's hard to pass in
+spaces in kernel parameters.
 
 The debug flags are bit flags for each BMC found, they are:
 IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8

Documentation/acpi/enumeration.txt

@@ -253,7 +253,7 @@ input driver:
 GPIO support
 ~~~~~~~~~~~~
 ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
 the device to the driver. ACPI 5.1 extended this with _DSD (Device
 Specific Data) which made it possible to name the GPIOs among other things.
 

Documentation/acpi/gpio-properties.txt

@@ -1,9 +1,9 @@
 _DSD Device Properties Related to GPIO
 --------------------------------------
 
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS.  Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS.  Previously, we were only able to use an integer index to find
 the corresponding GPIO, which is pretty error prone (it depends on
 the _CRS output ordering, for example).
 

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

@@ -6,6 +6,7 @@ provided by Arteris.
 Required properties:
 - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
                Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
 	       Should be "ti,dra7-l3-noc" for DRA7 family
                Should be "ti,am4372-l3-noc" for AM43 family
 - reg:	Contains L3 register address range for each noc domain.

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

Documentation/devicetree/bindings/rtc/abracon,abx80x.txt

@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in ohm.

Documentation/kasan.txt

@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
 bugs.
 
 KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
 
 Currently KASan is supported only for x86_64 architecture and requires that the
 kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
 
 and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
 is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
 
 Currently KASAN works only with the SLUB memory allocator.
 For better bug detection and nicer report, enable CONFIG_STACKTRACE and put

MAINTAINERS

@@ -892,11 +892,10 @@ S:	Maintained
 F:	arch/arm/mach-alpine/
 
 ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M:	Andrew Victor <linux@maxim.org.za>
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://maxim.org.za/at91_26.html
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
@@ -990,6 +989,12 @@ F:	drivers/clocksource/timer-prima2.c
 F:	drivers/clocksource/timer-atlas7.c
 N:	[^a-z]sirf
 
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M:	Baruch Siach <baruch@tkos.co.il>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+N:	digicolor
+
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
+F:	arch/arm/boot/dts/socfpga*
+F:	arch/arm/configs/socfpga_defconfig
 W:	http://www.rocketboards.org
-T:	git://git.rocketboards.org/linux-socfpga.git
-T:	git://git.rocketboards.org/linux-socfpga-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
 M:	Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -2116,8 +2122,9 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M:	Christian Daudt <bcm@fixthebug.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Ray Jui <rjui@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
 S:	Maintained
@@ -2168,7 +2175,6 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Marc Carino <marc.ceeeee@gmail.com>
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
@@ -5042,17 +5048,19 @@ S:	Orphan
 F:	drivers/video/fbdev/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <roland@kernel.org>
+M:	Doug Ledford <dledford@redhat.com>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
+T:	git git://github.com/dledford/linux.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
 F:	include/uapi/linux/if_infiniband.h
+F:	include/uapi/rdma/
+F:	include/rdma/
 
 INOTIFY
 M:	John McCutchan <john@johnmccutchan.com>
@@ -5805,6 +5813,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Bryan Wu <cooloney@gmail.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+M:	Jacek Anaszewski <j.anaszewski@samsung.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
@@ -11037,6 +11046,7 @@ F:	drivers/media/pci/zoran/
 ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
 M:	Minchan Kim <minchan@kernel.org>
 M:	Nitin Gupta <ngupta@vflare.org>
+R:	Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/block/zram/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -49,7 +49,7 @@
 		pinctrl-0 = <&matrix_keypad_pins>;
 
 		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
+		col-scan-delay-us = <5>;
 
 		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
 				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
@@ -473,7 +473,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <31 0>;
 
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -18,6 +18,7 @@
 	aliases {
 		rtc0 = &mcp_rtc;
 		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
 	};
 
 	memory {
@@ -83,7 +84,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
@@ -130,8 +131,8 @@
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
@@ -455,7 +456,7 @@
 	mcp_rtc: rtc@6f {
 		compatible = "microchip,mcp7941x";
 		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
+		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
 &uart3 {
 	status = "okay";
 	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x248>;
+			      <&dra7_pmx_core 0x3f8>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins_default>;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -105,6 +105,10 @@
 		};
 
 		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
 			serial@12000 {
 				status = "okay";
 			};

arch/arm/boot/dts/dra7.dtsi

@@ -911,7 +911,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
 			      <0x4ae0c158 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -944,7 +944,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
 			      <0x4a002470 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -977,7 +977,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
 			      <0x4a00246c 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1010,7 +1010,7 @@
 			ti,clock-cycles = <16>;
 
 			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
 			      <0x4ae0c154 0x4>;
 			reg-names = "setup-address", "control-address",
 				    "int-address", "efuse-address",
@@ -1203,7 +1203,7 @@
 			status = "disabled";
 		};
 
-		rtc@48838000 {
+		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
 			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -9,6 +9,7 @@
 
 #include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
 
 / {
@@ -105,6 +106,8 @@
 
 	rtc@10070000 {
 		status = "okay";
+		clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};
 
 	g2d@10800000 {

arch/arm/boot/dts/exynos5250-snow.dts

@@ -567,6 +567,7 @@
 	num-slots = <1>;
 	broken-cd;
 	cap-sdio-irq;
+	keep-power-in-suspend;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;

arch/arm/boot/dts/exynos5420-trip-points.dtsi

@@ -28,7 +28,7 @@ trips {
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1200000>; /* millicelsius */
+		temperature = <120000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};

arch/arm/boot/dts/exynos5420.dtsi

@@ -536,6 +536,7 @@
 		clock-names = "dp";
 		phys = <&dp_phy>;
 		phy-names = "dp";
+		power-domains = <&disp_pd>;
 	};
 
 	mipi_phy: video-phy@10040714 {

arch/arm/boot/dts/exynos5440-trip-points.dtsi

@@ -18,7 +18,7 @@ trips {
 		type = "active";
 	};
 	cpu-crit-0 {
-		temperature = <1050000>; /* millicelsius */
+		temperature = <105000>; /* millicelsius */
 		hysteresis = <0>; /* millicelsius */
 		type = "critical";
 	};

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -12,6 +12,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx23.dtsi"
 
 / {
@@ -93,6 +94,7 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			dr_mode = "host";
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
@@ -122,7 +124,7 @@
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 1>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };

arch/arm/boot/dts/imx25.dtsi

@@ -428,6 +428,7 @@
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";

arch/arm/boot/dts/imx28.dtsi

@@ -913,7 +913,7 @@
 					      80 81 68 69
 					      70 71 72 73
 					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 						  "saif0", "saif1", "i2c0", "i2c1",
 						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -31,6 +31,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 15 0>;
+			enable-active-high;
 		};
 
 		reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 0 0>;
+			enable-active-high;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -185,7 +185,6 @@
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	max7310_a: gpio@30 {

arch/arm/boot/dts/omap3-n900.dts

@@ -498,6 +498,8 @@
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <1>;
 	};
 
 	tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@
 		DRVDD-supply = <&vmmc2>;
 		IOVDD-supply = <&vio>;
 		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <2>;
 	};
 
 	tsl2563: tsl2563@29 {

arch/arm/boot/dts/omap3.dtsi

@@ -456,6 +456,7 @@
 		};
 
 		mmu_isp: mmu@480bd400 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x480bd400 0x80>;
 			interrupts = <24>;
@@ -464,6 +465,7 @@
 		};
 
 		mmu_iva: mmu@5d000000 {
+			#iommu-cells = <0>;
 			compatible = "ti,omap2-iommu";
 			reg = <0x5d000000 0x80>;
 			interrupts = <28>;

arch/arm/boot/dts/omap5.dtsi

@@ -128,7 +128,7 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -545,7 +545,7 @@
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -1017,23 +1017,6 @@
 			status = "disabled";
 		};
 
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
 		mcde@a0350000 {
 			compatible = "stericsson,mcde";
 			reg = <0xa0350000 0x1000>, /* MCDE */

arch/arm/boot/dts/ste-href.dtsi

@@ -111,6 +111,21 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+		};
+
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;

arch/arm/boot/dts/ste-snowball.dts

@@ -146,8 +146,21 @@
 		};
 
 		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
 			gpios = <&gpio7 4 0x4>;
 			enable-gpio = <&gpio6 25 0x4>;
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
 		};
 
 		// External Micro SD slot

arch/arm/configs/multi_v7_defconfig

@@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y

arch/arm/configs/omap2plus_defconfig

@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
 CONFIG_EXTCON_PALMAS=m
 CONFIG_TI_EMIF=m
 CONFIG_PWM=y

arch/arm/include/asm/dma-iommu.h

@@ -25,7 +25,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 

arch/arm/include/asm/xen/page.h

@@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 bool xen_arch_need_swiotlb(struct device *dev,
 			   unsigned long pfn,
 			   unsigned long mfn);
+unsigned long xen_get_swiotlb_free_pages(unsigned int order);
 
 #endif /* _ASM_ARM_XEN_PAGE_H */

arch/arm/kernel/perf_event_cpu.c

@@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu)
 
 static int of_pmu_irq_cfg(struct platform_device *pdev)
 {
-	int i;
+	int i, irq;
 	int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
 
 	if (!irqs)
 		return -ENOMEM;
 
+	/* Don't bother with PPIs; they're already affine */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0 && irq_is_percpu(irq))
+		return 0;
+
 	for (i = 0; i < pdev->num_resources; ++i) {
 		struct device_node *dn;
 		int cpu;
@@ -317,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev)
 				      i);
 		if (!dn) {
 			pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
-				of_node_full_name(dn), i);
+				of_node_full_name(pdev->dev.of_node), i);
 			break;
 		}
 

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify it under
  * the terms of the GNU General Public License version 2 as published by the

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -112,6 +112,7 @@
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
 #define OMAP3430_VC_CMD_RET_SHIFT			8
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
+#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 #define OMAP3430_VALID_MASK				(1 << 24)

arch/arm/mach-omap2/prm-regbits-44xx.h

@@ -35,6 +35,7 @@
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK						(1 << 4)
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
 #define OMAP4430_HSSCLL_SHIFT						24
 #define OMAP4430_ICEPICK_RST_SHIFT					9

arch/arm/mach-omap2/vc.c

@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
 	 * idle. And we can also scale voltages to zero for off-idle.
 	 * Note that no actual voltage scaling during off-idle will
 	 * happen unless the board specific twl4030 PMIC scripts are
-	 * loaded.
+	 * loaded. See also omap_vc_i2c_init for comments regarding
+	 * erratum i531.
 	 */
 	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
 	if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 		return;
 	}
 
+	/*
+	 * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+	 * erratum i531 "Extra Power Consumed When Repeated Start Operation
+	 * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+	 * Otherwise I2C4 eventually leads into about 23mW extra power being
+	 * consumed even during off idle using VMODE.
+	 */
 	i2c_high_speed = voltdm->pmic->i2c_high_speed;
 	if (i2c_high_speed)
-		voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+		voltdm->rmw(vc->common->i2c_cfg_clear_mask,
 			    vc->common->i2c_cfg_hsen_mask,
 			    vc->common->i2c_cfg_reg);
 

arch/arm/mach-omap2/vc.h

@@ -34,6 +34,7 @@ struct voltagedomain;
  * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
  * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
  * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
  * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
  * @i2c_mcode_mask: MCODE field mask for I2C config register
  *
@@ -52,6 +53,7 @@ struct omap_vc_common {
 	u8 cmd_ret_shift;
 	u8 cmd_off_shift;
 	u8 i2c_cfg_reg;
+	u8 i2c_cfg_clear_mask;
 	u8 i2c_cfg_hsen_mask;
 	u8 i2c_mcode_mask;
 };

arch/arm/mach-omap2/vc3xxx_data.c

@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
 	.cmd_onlp_shift	 = OMAP3430_VC_CMD_ONLP_SHIFT,
 	.cmd_ret_shift	 = OMAP3430_VC_CMD_RET_SHIFT,
 	.cmd_off_shift	 = OMAP3430_VC_CMD_OFF_SHIFT,
+	.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
 	.i2c_cfg_reg	 = OMAP3_PRM_VC_I2C_CFG_OFFSET,
 	.i2c_mcode_mask	 = OMAP3430_MCODE_MASK,

arch/arm/mach-omap2/vc44xx_data.c

@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
 	.cmd_ret_shift = OMAP4430_RET_SHIFT,
 	.cmd_off_shift = OMAP4430_OFF_SHIFT,
 	.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+	.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
 	.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
 	.i2c_mcode_mask	 = OMAP4430_HSMCODE_MASK,
 };

arch/arm/mach-pxa/Kconfig

@@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
 config PXA310_ULPI
 	bool
 
+config PXA_SYSTEMS_CPLDS
+	tristate "Motherboard cplds"
+	default ARCH_LUBBOCK || MACH_MAINSTONE
+	help
+	  This driver supports the Lubbock and Mainstone multifunction chip
+	  found on the pxa25x development platform system (Lubbock) and pxa27x
+	  development platform system (Mainstone). This IO board supports the
+	  interrupts handling, ethernet controller, flash chips, etc ...
+
 endif

arch/arm/mach-pxa/Makefile

@@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o

arch/arm/mach-pxa/include/mach/lubbock.h

@@ -37,7 +37,9 @@
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
 /* Board specific IRQs */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
 #define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
 #define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
 #define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
@@ -47,8 +49,7 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
-#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
 
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);

arch/arm/mach-pxa/include/mach/mainstone.h

@@ -120,7 +120,9 @@
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
 /* board specific IRQs */
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
 #define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
 #define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
 #define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
@@ -136,6 +138,4 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
-#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
-
 #endif

arch/arm/mach-pxa/lubbock.c

@@ -12,6 +12,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 }
 EXPORT_SYMBOL(lubbock_set_misc_wr);
 
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= lubbock_mask_irq,
-	.irq_mask	= lubbock_mask_irq,
-	.irq_unmask	= lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	do {
-		/* clear our parent irq */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	} while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-	int irq;
-
-	pxa25x_init_irq();
-
-	/* setup extra lubbock irqs */
-	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-	.resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-	if (machine_is_lubbock()) {
-		register_syscore_ops(&lubbock_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
 	},
 };
 
+static struct resource lubbock_cplds_resources[] = {
+	[0] = {
+		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
+		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= LUBBOCK_IRQ(0),
+		.end	= LUBBOCK_IRQ(6),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lubbock_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &lubbock_cplds_resources[0],
+	.num_resources	= 3,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
+	&lubbock_cplds_device,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
 	.map_io		= lubbock_map_io,
 	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= lubbock_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= lubbock_init,

arch/arm/mach-pxa/mainstone.c

@@ -13,6 +13,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 };
 
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	MST_INTSETCLR &= ~(1 << mainstone_irq);
-	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= mainstone_mask_irq,
-	.irq_mask	= mainstone_mask_irq,
-	.irq_unmask	= mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = MST_INTSETCLR & mainstone_irq_enabled;
-	} while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	/* setup extra Mainstone irqs */
-	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
-		irq_set_chip_and_handler(irq, &mainstone_irq_chip,
-					 handle_level_irq);
-		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-		else
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	set_irq_flags(MAINSTONE_IRQ(8), 0);
-	set_irq_flags(MAINSTONE_IRQ(12), 0);
-
-	MST_INTMSKENA = 0;
-	MST_INTSETCLR = 0;
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
-	MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
-	.resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
-	if (machine_is_mainstone())
-		register_syscore_ops(&mainstone_irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (MST_ETH_PHYS + 0x300),
@@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
 	},
 };
 
+static struct resource mst_cplds_resources[] = {
+	[0] = {
+		.start	= MST_FPGA_PHYS + 0xc0,
+		.end	= MST_FPGA_PHYS + 0xe0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_GPIO_TO_IRQ(0),
+		.end	= PXA_GPIO_TO_IRQ(0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+	[2] = {
+		.start	= MAINSTONE_IRQ(0),
+		.end	= MAINSTONE_IRQ(15),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mst_cplds_device = {
+	.name		= "pxa_cplds_irqs",
+	.id		= -1,
+	.resource	= &mst_cplds_resources[0],
+	.num_resources	= 3,
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
 	&mst_gpio_keys_device,
+	&mst_cplds_device,
 };
 
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
@@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= mainstone_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.init_time	= pxa_timer_init,
 	.init_machine	= mainstone_init,

arch/arm/mach-pxa/pxa_cplds_irqs.c

@@ -0,0 +1,200 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ	32
+
+struct cplds {
+	void __iomem *base;
+	int irq;
+	unsigned int irq_mask;
+	struct gpio_desc *gpio0;
+	struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+	struct cplds *fpga = d;
+	unsigned long pending;
+	unsigned int bit;
+
+	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+	return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	fpga->irq_mask &= ~bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+	struct cplds *fpga = irq_data_get_irq_chip_data(d);
+	unsigned int cplds_irq = irqd_to_hwirq(d);
+	unsigned int bit = BIT(cplds_irq);
+
+	fpga->irq_mask |= bit;
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+	.name		= "pxa_cplds",
+	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_unmask	= cplds_irq_unmask,
+	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	struct cplds *fpga = d->host_data;
+
+	irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, fpga);
+
+	return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+	.xlate = irq_domain_xlate_twocell,
+	.map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+	return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct cplds *fpga;
+	int ret;
+	unsigned int base_irq = 0;
+	unsigned long irqflags = 0;
+
+	fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+	if (!fpga)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res) {
+		fpga->irq = (unsigned int)res->start;
+		irqflags = res->flags;
+	}
+	if (!fpga->irq)
+		return -ENODEV;
+
+	base_irq = platform_get_irq(pdev, 1);
+	if (base_irq < 0)
+		base_irq = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	fpga->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(fpga->base))
+		return PTR_ERR(fpga->base);
+
+	platform_set_drvdata(pdev, fpga);
+
+	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+			       irqflags, dev_name(&pdev->dev), fpga);
+	if (ret == -ENOSYS)
+		return -EPROBE_DEFER;
+
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+			fpga->irq, ret);
+		return ret;
+	}
+
+	irq_set_irq_wake(fpga->irq, 1);
+	fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+					       CPLDS_NB_IRQ,
+					       &cplds_irq_domain_ops, fpga);
+	if (!fpga->irqdomain)
+		return -ENODEV;
+
+	if (base_irq) {
+		ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+						 CPLDS_NB_IRQ);
+		if (ret) {
+			dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+				base_irq, base_irq + CPLDS_NB_IRQ);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+	struct cplds *fpga = platform_get_drvdata(pdev);
+
+	irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+	{ .compatible = "intel,lubbock-cplds-irqs", },
+	{ .compatible = "intel,mainstone-cplds-irqs", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+	.driver		= {
+		.name	= "pxa_cplds_irqs",
+		.of_match_table = of_match_ptr(cplds_id_table),
+	},
+	.probe		= cplds_probe,
+	.remove		= cplds_remove,
+	.resume		= cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");

arch/arm/mach-rockchip/pm.c

@@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
 static phys_addr_t rk3288_bootram_phy;
 
 static struct regmap *pmu_regmap;
+static struct regmap *grf_regmap;
 static struct regmap *sgrf_regmap;
 
 static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_grf_soc_con0;
 static u32 rk3288_sgrf_soc_con0;
 
 static inline u32 rk3288_l2_config(void)
@@ -70,11 +72,25 @@ static void rk3288_slp_mode_set(int level)
 {
 	u32 mode_set, mode_set1;
 
+	regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
+
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
 
 	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
 		    &rk3288_pmu_pwr_mode_con);
 
+	/*
+	 * We need set this bit GRF_FORCE_JTAG here, for the debug module,
+	 * otherwise, it may become inaccessible after resume.
+	 * This creates a potential security issue, as the sdmmc pins may
+	 * accept jtag data for a short time during resume if no card is
+	 * inserted.
+	 * But this is of course also true for the regular boot, before we
+	 * turn of the jtag/sdmmc autodetect.
+	 */
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
+		     GRF_FORCE_JTAG_WRITE);
+
 	/*
 	 * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
 	 * PCLK_WDT_GATE - disable WDT during suspend.
@@ -83,6 +99,13 @@ static void rk3288_slp_mode_set(int level)
 		     SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
 		     | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
 
+	/*
+	 * The dapswjdp can not auto reset before resume, that cause it may
+	 * access some illegal address during resume. Let's disable it before
+	 * suspend, and the MASKROM will enable it back.
+	 */
+	regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
 	/* booting address of resuming system is from this register value */
 	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
 		     rk3288_bootram_phy);
@@ -128,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
 	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
 		     rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
 		     | SGRF_FAST_BOOT_EN_WRITE);
+
+	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
+		     GRF_FORCE_JTAG_WRITE);
 }
 
 static int rockchip_lpmode_enter(unsigned long arg)
@@ -186,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np)
 		return PTR_ERR(pmu_regmap);
 	}
 
+	grf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-grf");
+	if (IS_ERR(grf_regmap)) {
+		pr_err("%s: could not find grf regmap\n", __func__);
+		return PTR_ERR(pmu_regmap);
+	}
+
 	sram_np = of_find_compatible_node(NULL, NULL,
 					  "rockchip,rk3288-pmu-sram");
 	if (!sram_np) {

arch/arm/mach-rockchip/pm.h

@@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
 #define RK3288_PMU_WAKEUP_RST_CLR_CNT	0x44
 #define RK3288_PMU_PWRMODE_CON1		0x90
 
+#define RK3288_GRF_SOC_CON0		0x244
+#define GRF_FORCE_JTAG			BIT(12)
+#define GRF_FORCE_JTAG_WRITE		BIT(28)
+
 #define RK3288_SGRF_SOC_CON0		(0x0000)
 #define RK3288_SGRF_FAST_BOOT_ADDR	(0x0120)
 #define SGRF_PCLK_WDT_GATE		BIT(6)
@@ -55,6 +59,10 @@ static inline void rockchip_suspend_init(void)
 #define SGRF_FAST_BOOT_EN		BIT(8)
 #define SGRF_FAST_BOOT_EN_WRITE		BIT(24)
 
+#define RK3288_SGRF_CPU_CON0		(0x40)
+#define SGRF_DAPDEVICEEN		BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE		BIT(16)
+
 #define RK3288_CRU_MODE_CON		0x50
 #define RK3288_CRU_SEL0_CON		0x60
 #define RK3288_CRU_SEL1_CON		0x64

arch/arm/mach-rockchip/rockchip.c

@@ -30,11 +30,30 @@
 #include "pm.h"
 
 #define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
 
 static void __init rockchip_timer_init(void)
 {
 	if (of_machine_is_compatible("rockchip,rk3288")) {
 		struct regmap *grf;
+		void __iomem *reg_base;
+
+		/*
+		 * Most/all uboot versions for rk3288 don't enable timer7
+		 * which is needed for the architected timer to work.
+		 * So make sure it is running during early boot.
+		 */
+		reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+		if (reg_base) {
+			writel(0, reg_base + 0x30);
+			writel(0xffffffff, reg_base + 0x20);
+			writel(0xffffffff, reg_base + 0x24);
+			writel(1, reg_base + 0x30);
+			dsb();
+			iounmap(reg_base);
+		} else {
+			pr_err("rockchip: could not map timer7 registers\n");
+		}
 
 		/*
 		 * Disable auto jtag/sdmmc switching that causes issues

arch/arm/mm/dma-mapping.c

@@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = {
  * arm_iommu_attach_device function.
  */
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
 {
 	unsigned int bits = size >> PAGE_SHIFT;
 	unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
@@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
 	int extensions = 1;
 	int err = -ENOMEM;
 
+	/* currently only 32-bit DMA address space is supported */
+	if (size > DMA_BIT_MASK(32) + 1)
+		return ERR_PTR(-ERANGE);
+
 	if (!bitmap_size)
 		return ERR_PTR(-EINVAL);
 
@@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (!iommu)
 		return false;
 
-	/*
-	 * currently arm_iommu_create_mapping() takes a max of size_t
-	 * for size param. So check this limit for now.
-	 */
-	if (size > SIZE_MAX)
-		return false;
-
 	mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
 	if (IS_ERR(mapping)) {
 		pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",

arch/arm/mm/proc-arm1020.S

@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

arch/arm/mm/proc-arm1020e.S

@@ -22,8 +22,6 @@
  *
  * These are the low level assembler for performing cache and TLB
  * functions on the arm1020e.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
  */
 #include <linux/linkage.h>
 #include <linux/init.h>

arch/arm/mm/proc-arm925.S

@@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext)
 	.type	__arm925_setup, #function
 __arm925_setup:
 	mov	r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
-        orr     r0,r0,#1 << 7
-#endif
 
 	/* Transparent on, D-cache clean & flush mode. See  NOTE2 above */
         orr     r0,r0,#1 << 1			@ transparent mode on

arch/arm/mm/proc-feroceon.S

@@ -602,7 +602,6 @@ __\name\()_proc_info:
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	initfn	__feroceon_setup, __\name\()_proc_info
-	.long __feroceon_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP

arch/arm/xen/mm.c

@@ -4,6 +4,7 @@
 #include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/export.h>
+#include <linux/memblock.h>
 #include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/types.h>
@@ -21,6 +22,20 @@
 #include <asm/xen/hypercall.h>
 #include <asm/xen/interface.h>
 
+unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	struct memblock_region *reg;
+	gfp_t flags = __GFP_NOWARN;
+
+	for_each_memblock(memory, reg) {
+		if (reg->base < (phys_addr_t)0xffffffff) {
+			flags |= __GFP_DMA;
+			break;
+		}
+	}
+	return __get_free_pages(flags, order);
+}
+
 enum dma_cache_op {
        DMA_UNMAP,
        DMA_MAP,

arch/m32r/kernel/smp.c

@@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0;
 /*
  * For flush_tlb_others()
  */
-static volatile cpumask_t flush_cpumask;
+static cpumask_t flush_cpumask;
 static struct mm_struct *flush_mm;
 static struct vm_area_struct *flush_vma;
 static volatile unsigned long flush_va;
@@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
 	 */
 	send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
 
-	while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
+	while (!cpumask_empty(&flush_cpumask)) {
 		/* nothing. lockup detection does not belong here */
 		mb();
 	}
@@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void)
 			__flush_tlb_page(va);
 		}
 	}
-	cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
+	cpumask_clear_cpu(cpu_id, &flush_cpumask);
 }
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/

arch/x86/boot/compressed/eboot.c

@@ -1109,6 +1109,8 @@ struct boot_params *make_boot_params(struct efi_config *c)
 	if (!cmdline_ptr)
 		goto fail;
 	hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
+	/* Fill in upper bits of command line address, NOP on 32 bit  */
+	boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32;
 
 	hdr->ramdisk_image = 0;
 	hdr->ramdisk_size = 0;

arch/x86/include/asm/hypervisor.h

@@ -50,7 +50,7 @@ extern const struct hypervisor_x86 *x86_hyper;
 /* Recognized hypervisors */
 extern const struct hypervisor_x86 x86_hyper_vmware;
 extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
-extern const struct hypervisor_x86 x86_hyper_xen_hvm;
+extern const struct hypervisor_x86 x86_hyper_xen;
 extern const struct hypervisor_x86 x86_hyper_kvm;
 
 extern void init_hypervisor(struct cpuinfo_x86 *c);

arch/x86/include/asm/spinlock.h

@@ -169,7 +169,7 @@ static inline int arch_spin_is_contended(arch_spinlock_t *lock)
 	struct __raw_tickets tmp = READ_ONCE(lock->tickets);
 
 	tmp.head &= ~TICKET_SLOWPATH_FLAG;
-	return (tmp.tail - tmp.head) > TICKET_LOCK_INC;
+	return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
 }
 #define arch_spin_is_contended	arch_spin_is_contended
 

arch/x86/include/asm/xen/page.h

@@ -269,4 +269,9 @@ static inline bool xen_arch_need_swiotlb(struct device *dev,
 	return false;
 }
 
+static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+	return __get_free_pages(__GFP_NOWARN, order);
+}
+
 #endif /* _ASM_X86_XEN_PAGE_H */

arch/x86/kernel/cpu/hypervisor.c

@@ -27,8 +27,8 @@
 
 static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
-#ifdef CONFIG_XEN_PVHVM
-	&x86_hyper_xen_hvm,
+#ifdef CONFIG_XEN
+	&x86_hyper_xen,
 #endif
 	&x86_hyper_vmware,
 	&x86_hyper_ms_hyperv,

arch/x86/kernel/cpu/perf_event_intel.c

@@ -2533,34 +2533,6 @@ ssize_t intel_event_sysfs_show(char *page, u64 config)
 	return x86_event_sysfs_show(page, config, event);
 }
 
-static __initconst const struct x86_pmu core_pmu = {
-	.name			= "core",
-	.handle_irq		= x86_pmu_handle_irq,
-	.disable_all		= x86_pmu_disable_all,
-	.enable_all		= core_pmu_enable_all,
-	.enable			= core_pmu_enable_event,
-	.disable		= x86_pmu_disable_event,
-	.hw_config		= x86_pmu_hw_config,
-	.schedule_events	= x86_schedule_events,
-	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
-	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
-	.event_map		= intel_pmu_event_map,
-	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
-	.apic			= 1,
-	/*
-	 * Intel PMCs cannot be accessed sanely above 32 bit width,
-	 * so we install an artificial 1<<31 period regardless of
-	 * the generic event period:
-	 */
-	.max_period		= (1ULL << 31) - 1,
-	.get_event_constraints	= intel_get_event_constraints,
-	.put_event_constraints	= intel_put_event_constraints,
-	.event_constraints	= intel_core_event_constraints,
-	.guest_get_msrs		= core_guest_get_msrs,
-	.format_attrs		= intel_arch_formats_attr,
-	.events_sysfs_show	= intel_event_sysfs_show,
-};
-
 struct intel_shared_regs *allocate_shared_regs(int cpu)
 {
 	struct intel_shared_regs *regs;
@@ -2743,6 +2715,44 @@ static struct attribute *intel_arch3_formats_attr[] = {
 	NULL,
 };
 
+static __initconst const struct x86_pmu core_pmu = {
+	.name			= "core",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= core_pmu_enable_all,
+	.enable			= core_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32-bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL<<31) - 1,
+	.get_event_constraints	= intel_get_event_constraints,
+	.put_event_constraints	= intel_put_event_constraints,
+	.event_constraints	= intel_core_event_constraints,
+	.guest_get_msrs		= core_guest_get_msrs,
+	.format_attrs		= intel_arch_formats_attr,
+	.events_sysfs_show	= intel_event_sysfs_show,
+
+	/*
+	 * Virtual (or funny metal) CPU can define x86_pmu.extra_regs
+	 * together with PMU version 1 and thus be using core_pmu with
+	 * shared_regs. We need following callbacks here to allocate
+	 * it properly.
+	 */
+	.cpu_prepare		= intel_pmu_cpu_prepare,
+	.cpu_starting		= intel_pmu_cpu_starting,
+	.cpu_dying		= intel_pmu_cpu_dying,
+};
+
 static __initconst const struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,

arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c

@@ -1,6 +1,13 @@
 /* Nehalem/SandBridge/Haswell uncore support */
 #include "perf_event_intel_uncore.h"
 
+/* Uncore IMC PCI IDs */
+#define PCI_DEVICE_ID_INTEL_SNB_IMC	0x0100
+#define PCI_DEVICE_ID_INTEL_IVB_IMC	0x0154
+#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC	0x0150
+#define PCI_DEVICE_ID_INTEL_HSW_IMC	0x0c00
+#define PCI_DEVICE_ID_INTEL_HSW_U_IMC	0x0a04
+
 /* SNB event control */
 #define SNB_UNC_CTL_EV_SEL_MASK			0x000000ff
 #define SNB_UNC_CTL_UMASK_MASK			0x0000ff00
@@ -472,6 +479,10 @@ static const struct pci_device_id hsw_uncore_pci_ids[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC),
 		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
 	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
 	{ /* end: all zeroes */ },
 };
 
@@ -502,6 +513,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = {
 	IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver),    /* 3rd Gen Core processor */
 	IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */
 	IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver),    /* 4th Gen Core Processor */
+	IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver),  /* 4th Gen Core ULT Mobile Processor */
 	{  /* end marker */ }
 };
 

arch/x86/kernel/process.c

@@ -57,7 +57,7 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
 	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },
 #endif
 };
-EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss);
+EXPORT_PER_CPU_SYMBOL(cpu_tss);
 
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU(unsigned char, is_idle);
@@ -156,11 +156,13 @@ void flush_thread(void)
 		/* FPU state will be reallocated lazily at the first use. */
 		drop_fpu(tsk);
 		free_thread_xstate(tsk);
-	} else if (!used_math()) {
-		/* kthread execs. TODO: cleanup this horror. */
-		if (WARN_ON(init_fpu(tsk)))
-			force_sig(SIGKILL, tsk);
-		user_fpu_begin();
+	} else {
+		if (!tsk_used_math(tsk)) {
+			/* kthread execs. TODO: cleanup this horror. */
+			if (WARN_ON(init_fpu(tsk)))
+				force_sig(SIGKILL, tsk);
+			user_fpu_begin();
+		}
 		restore_init_xstate();
 	}
 }

arch/x86/mm/ioremap.c

@@ -351,18 +351,20 @@ int arch_ioremap_pmd_supported(void)
  */
 void *xlate_dev_mem_ptr(phys_addr_t phys)
 {
-	void *addr;
-	unsigned long start = phys & PAGE_MASK;
+	unsigned long start  = phys &  PAGE_MASK;
+	unsigned long offset = phys & ~PAGE_MASK;
+	unsigned long vaddr;
 
 	/* If page is RAM, we can use __va. Otherwise ioremap and unmap. */
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
-	if (addr)
-		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
+	vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE);
+	/* Only add the offset on success and return NULL if the ioremap() failed: */
+	if (vaddr)
+		vaddr += offset;
 
-	return addr;
+	return (void *)vaddr;
 }
 
 void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)

arch/x86/pci/acpi.c

@@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge)
 	kfree(info);
 }
 
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
 static void probe_pci_root_info(struct pci_root_info *info,
 				struct acpi_device *device,
 				int busnum, int domain,
@@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info,
 			"no IO and memory resources present in _CRS\n");
 	else
 		resource_list_for_each_entry_safe(entry, tmp, list) {
-			if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
-			    (entry->res->flags & IORESOURCE_DISABLED))
+			if ((entry->res->flags & IORESOURCE_DISABLED) ||
+			    resource_is_pcicfg_ioport(entry->res))
 				resource_list_destroy_entry(entry);
 			else
 				entry->res->name = info->name;

arch/x86/xen/enlighten.c

@@ -1760,6 +1760,9 @@ static struct notifier_block xen_hvm_cpu_notifier = {
 
 static void __init xen_hvm_guest_init(void)
 {
+	if (xen_pv_domain())
+		return;
+
 	init_hvm_pv_info();
 
 	xen_hvm_init_shared_info();
@@ -1775,6 +1778,7 @@ static void __init xen_hvm_guest_init(void)
 	xen_hvm_init_time_ops();
 	xen_hvm_init_mmu_ops();
 }
+#endif
 
 static bool xen_nopv = false;
 static __init int xen_parse_nopv(char *arg)
@@ -1784,14 +1788,11 @@ static __init int xen_parse_nopv(char *arg)
 }
 early_param("xen_nopv", xen_parse_nopv);
 
-static uint32_t __init xen_hvm_platform(void)
+static uint32_t __init xen_platform(void)
 {
 	if (xen_nopv)
 		return 0;
 
-	if (xen_pv_domain())
-		return 0;
-
 	return xen_cpuid_base();
 }
 
@@ -1809,11 +1810,19 @@ bool xen_hvm_need_lapic(void)
 }
 EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
 
-const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
-	.name			= "Xen HVM",
-	.detect			= xen_hvm_platform,
+static void xen_set_cpu_features(struct cpuinfo_x86 *c)
+{
+	if (xen_pv_domain())
+		clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
+}
+
+const struct hypervisor_x86 x86_hyper_xen = {
+	.name			= "Xen",
+	.detect			= xen_platform,
+#ifdef CONFIG_XEN_PVHVM
 	.init_platform		= xen_hvm_guest_init,
+#endif
 	.x2apic_available	= xen_x2apic_para_available,
+	.set_cpu_features       = xen_set_cpu_features,
 };
-EXPORT_SYMBOL(x86_hyper_xen_hvm);
-#endif
+EXPORT_SYMBOL(x86_hyper_xen);

arch/x86/xen/suspend.c

@@ -88,7 +88,17 @@ static void xen_vcpu_notify_restore(void *data)
 	tick_resume_local();
 }
 
+static void xen_vcpu_notify_suspend(void *data)
+{
+	tick_suspend_local();
+}
+
 void xen_arch_resume(void)
 {
 	on_each_cpu(xen_vcpu_notify_restore, NULL, 1);
 }
+
+void xen_arch_suspend(void)
+{
+	on_each_cpu(xen_vcpu_notify_suspend, NULL, 1);
+}

block/blk-core.c

@@ -552,6 +552,8 @@ void blk_cleanup_queue(struct request_queue *q)
 		q->queue_lock = &q->__queue_lock;
 	spin_unlock_irq(lock);
 
+	bdi_destroy(&q->backing_dev_info);
+
 	/* @q is and will stay empty, shutdown and put */
 	blk_put_queue(q);
 }

block/blk-mq.c

@@ -677,8 +677,11 @@ static void blk_mq_rq_timer(unsigned long priv)
 		data.next = blk_rq_timeout(round_jiffies_up(data.next));
 		mod_timer(&q->timeout, data.next);
 	} else {
-		queue_for_each_hw_ctx(q, hctx, i)
-			blk_mq_tag_idle(hctx);
+		queue_for_each_hw_ctx(q, hctx, i) {
+			/* the hctx may be unmapped, so check it here */
+			if (blk_mq_hw_queue_mapped(hctx))
+				blk_mq_tag_idle(hctx);
+		}
 	}
 }
 
@@ -855,6 +858,16 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx)
 		spin_lock(&hctx->lock);
 		list_splice(&rq_list, &hctx->dispatch);
 		spin_unlock(&hctx->lock);
+		/*
+		 * the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but
+		 * it's possible the queue is stopped and restarted again
+		 * before this. Queue restart will dispatch requests. And since
+		 * requests in rq_list aren't added into hctx->dispatch yet,
+		 * the requests in rq_list might get lost.
+		 *
+		 * blk_mq_run_hw_queue() already checks the STOPPED bit
+		 **/
+		blk_mq_run_hw_queue(hctx, true);
 	}
 }
 
@@ -1571,22 +1584,6 @@ static int blk_mq_hctx_cpu_offline(struct blk_mq_hw_ctx *hctx, int cpu)
 	return NOTIFY_OK;
 }
 
-static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu)
-{
-	struct request_queue *q = hctx->queue;
-	struct blk_mq_tag_set *set = q->tag_set;
-
-	if (set->tags[hctx->queue_num])
-		return NOTIFY_OK;
-
-	set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num);
-	if (!set->tags[hctx->queue_num])
-		return NOTIFY_STOP;
-
-	hctx->tags = set->tags[hctx->queue_num];
-	return NOTIFY_OK;
-}
-
 static int blk_mq_hctx_notify(void *data, unsigned long action,
 			      unsigned int cpu)
 {
@@ -1594,8 +1591,11 @@ static int blk_mq_hctx_notify(void *data, unsigned long action,
 
 	if (action == CPU_DEAD || action == CPU_DEAD_FROZEN)
 		return blk_mq_hctx_cpu_offline(hctx, cpu);
-	else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
-		return blk_mq_hctx_cpu_online(hctx, cpu);
+
+	/*
+	 * In case of CPU online, tags may be reallocated
+	 * in blk_mq_map_swqueue() after mapping is updated.
+	 */
 
 	return NOTIFY_OK;
 }
@@ -1775,6 +1775,7 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 	unsigned int i;
 	struct blk_mq_hw_ctx *hctx;
 	struct blk_mq_ctx *ctx;
+	struct blk_mq_tag_set *set = q->tag_set;
 
 	queue_for_each_hw_ctx(q, hctx, i) {
 		cpumask_clear(hctx->cpumask);
@@ -1803,16 +1804,20 @@ static void blk_mq_map_swqueue(struct request_queue *q)
 		 * disable it and free the request entries.
 		 */
 		if (!hctx->nr_ctx) {
-			struct blk_mq_tag_set *set = q->tag_set;
-
 			if (set->tags[i]) {
 				blk_mq_free_rq_map(set, set->tags[i], i);
 				set->tags[i] = NULL;
-				hctx->tags = NULL;
 			}
+			hctx->tags = NULL;
 			continue;
 		}
 
+		/* unmapped hw queue can be remapped after CPU topo changed */
+		if (!set->tags[i])
+			set->tags[i] = blk_mq_init_rq_map(set, i);
+		hctx->tags = set->tags[i];
+		WARN_ON(!hctx->tags);
+
 		/*
 		 * Set the map size to the number of mapped software queues.
 		 * This is more accurate and more efficient than looping
@@ -2090,9 +2095,16 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
 	 */
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_freeze_queue_start(q);
-	list_for_each_entry(q, &all_q_list, all_q_node)
+	list_for_each_entry(q, &all_q_list, all_q_node) {
 		blk_mq_freeze_queue_wait(q);
 
+		/*
+		 * timeout handler can't touch hw queue during the
+		 * reinitialization
+		 */
+		del_timer_sync(&q->timeout);
+	}
+
 	list_for_each_entry(q, &all_q_list, all_q_node)
 		blk_mq_queue_reinit(q);
 

block/blk-sysfs.c

@@ -522,8 +522,6 @@ static void blk_release_queue(struct kobject *kobj)
 
 	blk_trace_shutdown(q);
 
-	bdi_destroy(&q->backing_dev_info);
-
 	ida_simple_remove(&blk_queue_ida, q->id);
 	call_rcu(&q->rcu_head, blk_free_queue_rcu);
 }

block/bounce.c

@@ -221,8 +221,8 @@ bounce:
 		if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
 			continue;
 
-		inc_zone_page_state(to->bv_page, NR_BOUNCE);
 		to->bv_page = mempool_alloc(pool, q->bounce_gfp);
+		inc_zone_page_state(to->bv_page, NR_BOUNCE);
 
 		if (rw == WRITE) {
 			char *vto, *vfrom;

block/elevator.c

@@ -157,7 +157,7 @@ struct elevator_queue *elevator_alloc(struct request_queue *q,
 
 	eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node);
 	if (unlikely(!eq))
-		goto err;
+		return NULL;
 
 	eq->type = e;
 	kobject_init(&eq->kobj, &elv_ktype);
@@ -165,10 +165,6 @@ struct elevator_queue *elevator_alloc(struct request_queue *q,
 	hash_init(eq->hash);
 
 	return eq;
-err:
-	kfree(eq);
-	elevator_put(e);
-	return NULL;
 }
 EXPORT_SYMBOL(elevator_alloc);
 

drivers/acpi/acpi_pnp.c

@@ -304,6 +304,8 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
 	{"PNPb006"},
 	/* cs423x-pnpbios */
 	{"CSC0100"},
+	{"CSC0103"},
+	{"CSC0110"},
 	{"CSC0000"},
 	{"GIM0100"},		/* Guillemot Turtlebeach something appears to be cs4232 compatible */
 	/* es18xx-pnpbios */

drivers/acpi/acpica/utglobal.c

@@ -102,19 +102,12 @@ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = {
 	{"_SB_", ACPI_TYPE_DEVICE, NULL},
 	{"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL},
 	{"_TZ_", ACPI_TYPE_DEVICE, NULL},
-	/*
-	 * March, 2015:
-	 * The _REV object is in the process of being deprecated, because
-	 * other ACPI implementations permanently return 2. Thus, it
-	 * has little or no value. Return 2 for compatibility with
-	 * other ACPI implementations.
-	 */
-	{"_REV", ACPI_TYPE_INTEGER, ACPI_CAST_PTR(char, 2)},
+	{"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL},
 	{"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME},
-	{"_GL_", ACPI_TYPE_MUTEX, ACPI_CAST_PTR(char, 1)},
+	{"_GL_", ACPI_TYPE_MUTEX, (char *)1},
 
 #if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)
-	{"_OSI", ACPI_TYPE_METHOD, ACPI_CAST_PTR(char, 1)},
+	{"_OSI", ACPI_TYPE_METHOD, (char *)1},
 #endif
 
 	/* Table terminator */

drivers/acpi/resource.c

@@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
  * @ares: Input ACPI resource object.
  * @types: Valid resource types of IORESOURCE_XXX
  *
- * This is a hepler function to support acpi_dev_get_resources(), which filters
+ * This is a helper function to support acpi_dev_get_resources(), which filters
  * ACPI resource objects according to resource types.
  */
 int acpi_dev_filter_resource_type(struct acpi_resource *ares,

drivers/acpi/sbshc.c

@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/dmi.h>
 #include "sbshc.h"
 
 #define PREFIX "ACPI: "
@@ -87,6 +88,8 @@ enum acpi_smb_offset {
 	ACPI_SMB_ALARM_DATA = 0x26,	/* 2 bytes alarm data */
 };
 
+static bool macbook;
+
 static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
 {
 	return ec_read(hc->offset + address, data);
@@ -132,6 +135,8 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
 	}
 
 	mutex_lock(&hc->lock);
+	if (macbook)
+		udelay(5);
 	if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
 		goto end;
 	if (temp) {
@@ -257,12 +262,29 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
 			      acpi_handle handle, acpi_ec_query_func func,
 			      void *data);
 
+static int macbook_dmi_match(const struct dmi_system_id *d)
+{
+	pr_debug("Detected MacBook, enabling workaround\n");
+	macbook = true;
+	return 0;
+}
+
+static struct dmi_system_id acpi_smbus_dmi_table[] = {
+	{ macbook_dmi_match, "Apple MacBook", {
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+	},
+	{ },
+};
+
 static int acpi_smbus_hc_add(struct acpi_device *device)
 {
 	int status;
 	unsigned long long val;
 	struct acpi_smb_hc *hc;
 
+	dmi_check_system(acpi_smbus_dmi_table);
+
 	if (!device)
 		return -EINVAL;
 

drivers/block/loop.c

@@ -1620,8 +1620,8 @@ out:
 
 static void loop_remove(struct loop_device *lo)
 {
-	del_gendisk(lo->lo_disk);
 	blk_cleanup_queue(lo->lo_queue);
+	del_gendisk(lo->lo_disk);
 	blk_mq_free_tag_set(&lo->tag_set);
 	put_disk(lo->lo_disk);
 	kfree(lo);

drivers/block/nvme-scsi.c

@@ -944,7 +944,8 @@ static int nvme_trans_ext_inq_page(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 static int nvme_trans_bdev_limits_page(struct nvme_ns *ns, struct sg_io_hdr *hdr,
 					u8 *inq_response, int alloc_len)
 {
-	__be32 max_sectors = cpu_to_be32(queue_max_hw_sectors(ns->queue));
+	__be32 max_sectors = cpu_to_be32(
+		nvme_block_nr(ns, queue_max_hw_sectors(ns->queue)));
 	__be32 max_discard = cpu_to_be32(ns->queue->limits.max_discard_sectors);
 	__be32 discard_desc_count = cpu_to_be32(0x100);
 

drivers/block/xen-blkback/blkback.c

@@ -265,17 +265,6 @@ static void put_persistent_gnt(struct xen_blkif *blkif,
 	atomic_dec(&blkif->persistent_gnt_in_use);
 }
 
-static void free_persistent_gnts_unmap_callback(int result,
-						struct gntab_unmap_queue_data *data)
-{
-	struct completion *c = data->data;
-
-	/* BUG_ON used to reproduce existing behaviour,
-	   but is this the best way to deal with this? */
-	BUG_ON(result);
-	complete(c);
-}
-
 static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
                                  unsigned int num)
 {
@@ -285,12 +274,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
 	struct rb_node *n;
 	int segs_to_unmap = 0;
 	struct gntab_unmap_queue_data unmap_data;
-	struct completion unmap_completion;
 
-	init_completion(&unmap_completion);
-
-	unmap_data.data = &unmap_completion;
-	unmap_data.done = &free_persistent_gnts_unmap_callback;
 	unmap_data.pages = pages;
 	unmap_data.unmap_ops = unmap;
 	unmap_data.kunmap_ops = NULL;
@@ -310,8 +294,7 @@ static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
 			!rb_next(&persistent_gnt->node)) {
 
 			unmap_data.count = segs_to_unmap;
-			gnttab_unmap_refs_async(&unmap_data);
-			wait_for_completion(&unmap_completion);
+			BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
 
 			put_free_pages(blkif, pages, segs_to_unmap);
 			segs_to_unmap = 0;
@@ -329,8 +312,13 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work)
 	struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	struct persistent_gnt *persistent_gnt;
-	int ret, segs_to_unmap = 0;
+	int segs_to_unmap = 0;
 	struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work);
+	struct gntab_unmap_queue_data unmap_data;
+
+	unmap_data.pages = pages;
+	unmap_data.unmap_ops = unmap;
+	unmap_data.kunmap_ops = NULL;
 
 	while(!list_empty(&blkif->persistent_purge_list)) {
 		persistent_gnt = list_first_entry(&blkif->persistent_purge_list,
@@ -346,17 +334,16 @@ void xen_blkbk_unmap_purged_grants(struct work_struct *work)
 		pages[segs_to_unmap] = persistent_gnt->page;
 
 		if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
-			ret = gnttab_unmap_refs(unmap, NULL, pages,
-				segs_to_unmap);
-			BUG_ON(ret);
+			unmap_data.count = segs_to_unmap;
+			BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
 			put_free_pages(blkif, pages, segs_to_unmap);
 			segs_to_unmap = 0;
 		}
 		kfree(persistent_gnt);
 	}
 	if (segs_to_unmap > 0) {
-		ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap);
-		BUG_ON(ret);
+		unmap_data.count = segs_to_unmap;
+		BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
 		put_free_pages(blkif, pages, segs_to_unmap);
 	}
 }

drivers/block/zram/zram_drv.c

@@ -74,6 +74,27 @@ static inline struct zram *dev_to_zram(struct device *dev)
 	return (struct zram *)dev_to_disk(dev)->private_data;
 }
 
+static ssize_t compact_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	unsigned long nr_migrated;
+	struct zram *zram = dev_to_zram(dev);
+	struct zram_meta *meta;
+
+	down_read(&zram->init_lock);
+	if (!init_done(zram)) {
+		up_read(&zram->init_lock);
+		return -EINVAL;
+	}
+
+	meta = zram->meta;
+	nr_migrated = zs_compact(meta->mem_pool);
+	atomic64_add(nr_migrated, &zram->stats.num_migrated);
+	up_read(&zram->init_lock);
+
+	return len;
+}
+
 static ssize_t disksize_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -1038,6 +1059,7 @@ static const struct block_device_operations zram_devops = {
 	.owner = THIS_MODULE
 };
 
+static DEVICE_ATTR_WO(compact);
 static DEVICE_ATTR_RW(disksize);
 static DEVICE_ATTR_RO(initstate);
 static DEVICE_ATTR_WO(reset);
@@ -1114,6 +1136,7 @@ static struct attribute *zram_disk_attrs[] = {
 	&dev_attr_num_writes.attr,
 	&dev_attr_failed_reads.attr,
 	&dev_attr_failed_writes.attr,
+	&dev_attr_compact.attr,
 	&dev_attr_invalid_io.attr,
 	&dev_attr_notify_free.attr,
 	&dev_attr_zero_pages.attr,

drivers/bus/arm-cci.c

@@ -660,7 +660,7 @@ validate_group(struct perf_event *event)
 		 * Initialise the fake PMU. We only need to populate the
 		 * used_mask for the purposes of validation.
 		 */
-		.used_mask = CPU_BITS_NONE,
+		.used_mask = { 0 },
 	};
 
 	if (!validate_event(event->pmu, &fake_pmu, leader))

drivers/bus/omap_l3_noc.c

@@ -1,7 +1,7 @@
 /*
  * OMAP L3 Interconnect error handling driver
  *
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  *	Sricharan <r.sricharan@ti.com>
  *
@@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 }
 
 static const struct of_device_id l3_noc_match[] = {
-	{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
+	{.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
+	{.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
 	{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
 	{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
 	{},

drivers/bus/omap_l3_noc.h

@@ -1,7 +1,7 @@
 /*
  * OMAP L3 Interconnect  error handling driver header
  *
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
  *	sricharan <r.sricharan@ti.com>
  *
@@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = {
 };
 
 
-static struct l3_target_data omap_l3_target_data_clk3[] = {
-	{0x0100, "EMUSS",},
-	{0x0300, "DEBUG SOURCE",},
-	{0x0,	"HOST CLK3",},
+static struct l3_target_data omap4_l3_target_data_clk3[] = {
+	{0x0100, "DEBUGSS",},
 };
 
-static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
+static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
 	.offset = 0x0200,
-	.l3_targ = omap_l3_target_data_clk3,
-	.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
+	.l3_targ = omap4_l3_target_data_clk3,
+	.num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
 };
 
 static struct l3_masters_data omap_l3_masters[] = {
@@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = {
 	{ 0x32, "USBHOSTFS"}
 };
 
-static struct l3_flagmux_data *omap_l3_flagmux[] = {
+static struct l3_flagmux_data *omap4_l3_flagmux[] = {
 	&omap_l3_flagmux_clk1,
 	&omap_l3_flagmux_clk2,
-	&omap_l3_flagmux_clk3,
+	&omap4_l3_flagmux_clk3,
 };
 
-static const struct omap_l3 omap_l3_data = {
-	.l3_flagmux = omap_l3_flagmux,
-	.num_modules = ARRAY_SIZE(omap_l3_flagmux),
+static const struct omap_l3 omap4_l3_data = {
+	.l3_flagmux = omap4_l3_flagmux,
+	.num_modules = ARRAY_SIZE(omap4_l3_flagmux),
 	.l3_masters = omap_l3_masters,
 	.num_masters = ARRAY_SIZE(omap_l3_masters),
 	/* The 6 MSBs of register field used to distinguish initiator */
 	.mst_addr_mask = 0xFC,
 };
 
+/* OMAP5 data */
+static struct l3_target_data omap5_l3_target_data_clk3[] = {
+	{0x0100, "L3INSTR",},
+	{0x0300, "DEBUGSS",},
+	{0x0,	 "HOSTCLK3",},
+};
+
+static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
+	.offset = 0x0200,
+	.l3_targ = omap5_l3_target_data_clk3,
+	.num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
+};
+
+static struct l3_flagmux_data *omap5_l3_flagmux[] = {
+	&omap_l3_flagmux_clk1,
+	&omap_l3_flagmux_clk2,
+	&omap5_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 omap5_l3_data = {
+	.l3_flagmux = omap5_l3_flagmux,
+	.num_modules = ARRAY_SIZE(omap5_l3_flagmux),
+	.l3_masters = omap_l3_masters,
+	.num_masters = ARRAY_SIZE(omap_l3_masters),
+	/* The 6 MSBs of register field used to distinguish initiator */
+	.mst_addr_mask = 0x7E0,
+};
+
 /* DRA7 data */
 static struct l3_target_data dra_l3_target_data_clk1[] = {
 	{0x2a00, "AES1",},
@@ -274,7 +300,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = {
 
 static struct l3_target_data dra_l3_target_data_clk2[] = {
 	{0x0,	"HOST CLK1",},
-	{0x0,	"HOST CLK2",},
+	{0x800000, "HOST CLK2",},
 	{0xdead, L3_TARGET_NOT_SUPPORTED,},
 	{0x3400, "SHA2_2",},
 	{0x0900, "BB2D",},

drivers/char/hw_random/bcm63xx-rng.c

@@ -57,7 +57,7 @@ static void bcm63xx_rng_cleanup(struct hwrng *rng)
 	val &= ~RNG_EN;
 	__raw_writel(val, priv->regs + RNG_CTRL);
 
-	clk_didsable_unprepare(prov->clk);
+	clk_disable_unprepare(priv->clk);
 }
 
 static int bcm63xx_rng_data_present(struct hwrng *rng, int wait)
@@ -97,14 +97,14 @@ static int bcm63xx_rng_probe(struct platform_device *pdev)
 	priv->rng.name = pdev->name;
 	priv->rng.init = bcm63xx_rng_init;
 	priv->rng.cleanup = bcm63xx_rng_cleanup;
-	prov->rng.data_present = bcm63xx_rng_data_present;
+	priv->rng.data_present = bcm63xx_rng_data_present;
 	priv->rng.data_read = bcm63xx_rng_data_read;
 
 	priv->clk = devm_clk_get(&pdev->dev, "ipsec");
 	if (IS_ERR(priv->clk)) {
-		error = PTR_ERR(priv->clk);
-		dev_err(&pdev->dev, "no clock for device: %d\n", error);
-		return error;
+		ret = PTR_ERR(priv->clk);
+		dev_err(&pdev->dev, "no clock for device: %d\n", ret);
+		return ret;
 	}
 
 	if (!devm_request_mem_region(&pdev->dev, r->start,
@@ -120,11 +120,11 @@ static int bcm63xx_rng_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	error = devm_hwrng_register(&pdev->dev, &priv->rng);
-	if (error) {
+	ret = devm_hwrng_register(&pdev->dev, &priv->rng);
+	if (ret) {
 		dev_err(&pdev->dev, "failed to register rng device: %d\n",
-			error);
-		return error;
+			ret);
+		return ret;
 	}
 
 	dev_info(&pdev->dev, "registered RNG driver\n");

drivers/char/ipmi/ipmi_msghandler.c

@@ -2000,7 +2000,7 @@ static int smi_ipmb_proc_show(struct seq_file *m, void *v)
 		seq_printf(m, " %x", intf->channels[i].address);
 	seq_putc(m, '\n');
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_ipmb_proc_open(struct inode *inode, struct file *file)
@@ -2023,7 +2023,7 @@ static int smi_version_proc_show(struct seq_file *m, void *v)
 		   ipmi_version_major(&intf->bmc->id),
 		   ipmi_version_minor(&intf->bmc->id));
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_version_proc_open(struct inode *inode, struct file *file)

drivers/char/ipmi/ipmi_si_intf.c

@@ -942,8 +942,7 @@ static void sender(void                *send_info,
 		 * If we are running to completion, start it and run
 		 * transactions until everything is clear.
 		 */
-		smi_info->curr_msg = msg;
-		smi_info->waiting_msg = NULL;
+		smi_info->waiting_msg = msg;
 
 		/*
 		 * Run to completion means we are single-threaded, no
@@ -2244,7 +2243,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
 	acpi_handle handle;
 	acpi_status status;
 	unsigned long long tmp;
-	int rv;
+	int rv = -EINVAL;
 
 	acpi_dev = pnp_acpi_device(dev);
 	if (!acpi_dev)
@@ -2262,8 +2261,10 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
 
 	/* _IFT tells us the interface type: KCS, BT, etc */
 	status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
-	if (ACPI_FAILURE(status))
+	if (ACPI_FAILURE(status)) {
+		dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
 		goto err_free;
+	}
 
 	switch (tmp) {
 	case 1:
@@ -2276,6 +2277,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
 		info->si_type = SI_BT;
 		break;
 	case 4: /* SSIF, just ignore */
+		rv = -ENODEV;
 		goto err_free;
 	default:
 		dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
@@ -2336,7 +2338,7 @@ static int ipmi_pnp_probe(struct pnp_dev *dev,
 
 err_free:
 	kfree(info);
-	return -EINVAL;
+	return rv;
 }
 
 static void ipmi_pnp_remove(struct pnp_dev *dev)
@@ -3080,7 +3082,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v)
 
 	seq_printf(m, "%s\n", si_to_str[smi->si_type]);
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_type_proc_open(struct inode *inode, struct file *file)
@@ -3153,7 +3155,7 @@ static int smi_params_proc_show(struct seq_file *m, void *v)
 		   smi->irq,
 		   smi->slave_addr);
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_params_proc_open(struct inode *inode, struct file *file)

drivers/char/ipmi/ipmi_ssif.c

@@ -31,7 +31,6 @@
  * interface into the I2C driver, I believe.
  */
 
-#include <linux/version.h>
 #if defined(MODVERSIONS)
 #include <linux/modversions.h>
 #endif
@@ -166,6 +165,9 @@ enum ssif_stat_indexes {
 	/* Number of watchdog pretimeouts. */
 	SSIF_STAT_watchdog_pretimeouts,
 
+	/* Number of alers received. */
+	SSIF_STAT_alerts,
+
 	/* Always add statistics before this value, it must be last. */
 	SSIF_NUM_STATS
 };
@@ -214,7 +216,16 @@ struct ssif_info {
 #define WDT_PRE_TIMEOUT_INT	0x08
 	unsigned char       msg_flags;
 
+	u8		    global_enables;
 	bool		    has_event_buffer;
+	bool		    supports_alert;
+
+	/*
+	 * Used to tell what we should do with alerts.  If we are
+	 * waiting on a response, read the data immediately.
+	 */
+	bool		    got_alert;
+	bool		    waiting_alert;
 
 	/*
 	 * If set to true, this will request events the next time the
@@ -478,13 +489,13 @@ static int ipmi_ssif_thread(void *data)
 
 		if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
 			result = i2c_smbus_write_block_data(
-				ssif_info->client, SSIF_IPMI_REQUEST,
+				ssif_info->client, ssif_info->i2c_command,
 				ssif_info->i2c_data[0],
 				ssif_info->i2c_data + 1);
 			ssif_info->done_handler(ssif_info, result, NULL, 0);
 		} else {
 			result = i2c_smbus_read_block_data(
-				ssif_info->client, SSIF_IPMI_RESPONSE,
+				ssif_info->client, ssif_info->i2c_command,
 				ssif_info->i2c_data);
 			if (result < 0)
 				ssif_info->done_handler(ssif_info, result,
@@ -518,15 +529,12 @@ static int ssif_i2c_send(struct ssif_info *ssif_info,
 static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			     unsigned char *data, unsigned int len);
 
-static void retry_timeout(unsigned long data)
+static void start_get(struct ssif_info *ssif_info)
 {
-	struct ssif_info *ssif_info = (void *) data;
 	int rv;
 
-	if (ssif_info->stopping)
-		return;
-
 	ssif_info->rtc_us_timer = 0;
+	ssif_info->multi_pos = 0;
 
 	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
 			  SSIF_IPMI_RESPONSE,
@@ -540,6 +548,46 @@ static void retry_timeout(unsigned long data)
 	}
 }
 
+static void retry_timeout(unsigned long data)
+{
+	struct ssif_info *ssif_info = (void *) data;
+	unsigned long oflags, *flags;
+	bool waiting;
+
+	if (ssif_info->stopping)
+		return;
+
+	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+	waiting = ssif_info->waiting_alert;
+	ssif_info->waiting_alert = false;
+	ipmi_ssif_unlock_cond(ssif_info, flags);
+
+	if (waiting)
+		start_get(ssif_info);
+}
+
+
+static void ssif_alert(struct i2c_client *client, unsigned int data)
+{
+	struct ssif_info *ssif_info = i2c_get_clientdata(client);
+	unsigned long oflags, *flags;
+	bool do_get = false;
+
+	ssif_inc_stat(ssif_info, alerts);
+
+	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+	if (ssif_info->waiting_alert) {
+		ssif_info->waiting_alert = false;
+		del_timer(&ssif_info->retry_timer);
+		do_get = true;
+	} else if (ssif_info->curr_msg) {
+		ssif_info->got_alert = true;
+	}
+	ipmi_ssif_unlock_cond(ssif_info, flags);
+	if (do_get)
+		start_get(ssif_info);
+}
+
 static int start_resend(struct ssif_info *ssif_info);
 
 static void msg_done_handler(struct ssif_info *ssif_info, int result,
@@ -559,9 +607,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 		if (ssif_info->retries_left > 0) {
 			ssif_inc_stat(ssif_info, receive_retries);
 
+			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+			ssif_info->waiting_alert = true;
+			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
 			mod_timer(&ssif_info->retry_timer,
 				  jiffies + SSIF_MSG_JIFFIES);
-			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
+			ipmi_ssif_unlock_cond(ssif_info, flags);
 			return;
 		}
 
@@ -581,9 +632,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 		ssif_inc_stat(ssif_info, received_message_parts);
 
 		/* Remove the multi-part read marker. */
-		for (i = 0; i < (len-2); i++)
-			ssif_info->data[i] = data[i+2];
 		len -= 2;
+		for (i = 0; i < len; i++)
+			ssif_info->data[i] = data[i+2];
 		ssif_info->multi_len = len;
 		ssif_info->multi_pos = 1;
 
@@ -610,9 +661,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			goto continue_op;
 		}
 
-		blocknum = data[ssif_info->multi_len];
+		blocknum = data[0];
 
-		if (ssif_info->multi_len+len-1 > IPMI_MAX_MSG_LENGTH) {
+		if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
 			/* Received message too big, abort the operation. */
 			result = -E2BIG;
 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
@@ -622,15 +673,15 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 		}
 
 		/* Remove the blocknum from the data. */
-		for (i = 0; i < (len-1); i++)
-			ssif_info->data[i+ssif_info->multi_len] = data[i+1];
 		len--;
+		for (i = 0; i < len; i++)
+			ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
 		ssif_info->multi_len += len;
 		if (blocknum == 0xff) {
 			/* End of read */
 			len = ssif_info->multi_len;
 			data = ssif_info->data;
-		} else if ((blocknum+1) != ssif_info->multi_pos) {
+		} else if (blocknum + 1 != ssif_info->multi_pos) {
 			/*
 			 * Out of sequence block, just abort.  Block
 			 * numbers start at zero for the second block,
@@ -650,7 +701,7 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			if (rv < 0) {
 				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
 					pr_info(PFX
-						"Error from i2c_non_blocking_op(2)\n");
+						"Error from ssif_i2c_send\n");
 
 				result = -EIO;
 			} else
@@ -830,7 +881,11 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 	}
 
 	if (ssif_info->multi_data) {
-		/* In the middle of a multi-data write. */
+		/*
+		 * In the middle of a multi-data write.  See the comment
+		 * in the SSIF_MULTI_n_PART case in the probe function
+		 * for details on the intricacies of this.
+		 */
 		int left;
 
 		ssif_inc_stat(ssif_info, sent_messages_parts);
@@ -864,15 +919,32 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 			msg_done_handler(ssif_info, -EIO, NULL, 0);
 		}
 	} else {
+		unsigned long oflags, *flags;
+		bool got_alert;
+
 		ssif_inc_stat(ssif_info, sent_messages);
 		ssif_inc_stat(ssif_info, sent_messages_parts);
 
-		/* Wait a jiffie then request the next message */
-		ssif_info->retries_left = SSIF_RECV_RETRIES;
-		ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
-		mod_timer(&ssif_info->retry_timer,
-			  jiffies + SSIF_MSG_PART_JIFFIES);
-		return;
+		flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+		got_alert = ssif_info->got_alert;
+		if (got_alert) {
+			ssif_info->got_alert = false;
+			ssif_info->waiting_alert = false;
+		}
+
+		if (got_alert) {
+			ipmi_ssif_unlock_cond(ssif_info, flags);
+			/* The alert already happened, try now. */
+			retry_timeout((unsigned long) ssif_info);
+		} else {
+			/* Wait a jiffie then request the next message */
+			ssif_info->waiting_alert = true;
+			ssif_info->retries_left = SSIF_RECV_RETRIES;
+			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
+			mod_timer(&ssif_info->retry_timer,
+				  jiffies + SSIF_MSG_PART_JIFFIES);
+			ipmi_ssif_unlock_cond(ssif_info, flags);
+		}
 	}
 }
 
@@ -881,6 +953,8 @@ static int start_resend(struct ssif_info *ssif_info)
 	int rv;
 	int command;
 
+	ssif_info->got_alert = false;
+
 	if (ssif_info->data_len > 32) {
 		command = SSIF_IPMI_MULTI_PART_REQUEST_START;
 		ssif_info->multi_data = ssif_info->data;
@@ -915,7 +989,7 @@ static int start_send(struct ssif_info *ssif_info,
 		return -E2BIG;
 
 	ssif_info->retries_left = SSIF_SEND_RETRIES;
-	memcpy(ssif_info->data+1, data, len);
+	memcpy(ssif_info->data + 1, data, len);
 	ssif_info->data_len = len;
 	return start_resend(ssif_info);
 }
@@ -1200,7 +1274,7 @@ static int smi_type_proc_show(struct seq_file *m, void *v)
 {
 	seq_puts(m, "ssif\n");
 
-	return seq_has_overflowed(m);
+	return 0;
 }
 
 static int smi_type_proc_open(struct inode *inode, struct file *file)
@@ -1243,6 +1317,8 @@ static int smi_stats_proc_show(struct seq_file *m, void *v)
 		   ssif_get_stat(ssif_info, events));
 	seq_printf(m, "watchdog_pretimeouts:   %u\n",
 		   ssif_get_stat(ssif_info, watchdog_pretimeouts));
+	seq_printf(m, "alerts:                 %u\n",
+		   ssif_get_stat(ssif_info, alerts));
 	return 0;
 }
 
@@ -1258,6 +1334,23 @@ static const struct file_operations smi_stats_proc_ops = {
 	.release	= single_release,
 };
 
+static int strcmp_nospace(char *s1, char *s2)
+{
+	while (*s1 && *s2) {
+		while (isspace(*s1))
+			s1++;
+		while (isspace(*s2))
+			s2++;
+		if (*s1 > *s2)
+			return 1;
+		if (*s1 < *s2)
+			return -1;
+		s1++;
+		s2++;
+	}
+	return 0;
+}
+
 static struct ssif_addr_info *ssif_info_find(unsigned short addr,
 					     char *adapter_name,
 					     bool match_null_name)
@@ -1272,8 +1365,10 @@ restart:
 					/* One is NULL and one is not */
 					continue;
 				}
-				if (strcmp(info->adapter_name, adapter_name))
-					/* Names to not match */
+				if (adapter_name &&
+				    strcmp_nospace(info->adapter_name,
+						   adapter_name))
+					/* Names do not match */
 					continue;
 			}
 			found = info;
@@ -1306,6 +1401,12 @@ static bool check_acpi(struct ssif_info *ssif_info, struct device *dev)
 	return false;
 }
 
+/*
+ * Global enables we care about.
+ */
+#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
+			     IPMI_BMC_EVT_MSG_INTR)
+
 static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	unsigned char     msg[3];
@@ -1391,13 +1492,33 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 			break;
 
 		case SSIF_MULTI_2_PART:
-			if (ssif_info->max_xmit_msg_size > 64)
-				ssif_info->max_xmit_msg_size = 64;
+			if (ssif_info->max_xmit_msg_size > 63)
+				ssif_info->max_xmit_msg_size = 63;
 			if (ssif_info->max_recv_msg_size > 62)
 				ssif_info->max_recv_msg_size = 62;
 			break;
 
 		case SSIF_MULTI_n_PART:
+			/*
+			 * The specification is rather confusing at
+			 * this point, but I think I understand what
+			 * is meant.  At least I have a workable
+			 * solution.  With multi-part messages, you
+			 * cannot send a message that is a multiple of
+			 * 32-bytes in length, because the start and
+			 * middle messages are 32-bytes and the end
+			 * message must be at least one byte.  You
+			 * can't fudge on an extra byte, that would
+			 * screw up things like fru data writes.  So
+			 * we limit the length to 63 bytes.  That way
+			 * a 32-byte message gets sent as a single
+			 * part.  A larger message will be a 32-byte
+			 * start and the next message is always going
+			 * to be 1-31 bytes in length.  Not ideal, but
+			 * it should work.
+			 */
+			if (ssif_info->max_xmit_msg_size > 63)
+				ssif_info->max_xmit_msg_size = 63;
 			break;
 
 		default:
@@ -1407,7 +1528,7 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	} else {
  no_support:
 		/* Assume no multi-part or PEC support */
-		pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so  using defaults\n",
+		pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
 		       rv, len, resp[2]);
 
 		ssif_info->max_xmit_msg_size = 32;
@@ -1436,6 +1557,8 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		goto found;
 	}
 
+	ssif_info->global_enables = resp[3];
+
 	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
 		ssif_info->has_event_buffer = true;
 		/* buffer is already enabled, nothing to do. */
@@ -1444,18 +1567,37 @@ static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
 	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
-	msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+	msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
 	rv = do_cmd(client, 3, msg, &len, resp);
 	if (rv || (len < 2)) {
-		pr_warn(PFX "Error getting global enables: %d %d %2.2x\n",
+		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
 			rv, len, resp[2]);
 		rv = 0; /* Not fatal */
 		goto found;
 	}
 
-	if (resp[2] == 0)
+	if (resp[2] == 0) {
 		/* A successful return means the event buffer is supported. */
 		ssif_info->has_event_buffer = true;
+		ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
+	}
+
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+	msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
+	rv = do_cmd(client, 3, msg, &len, resp);
+	if (rv || (len < 2)) {
+		pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
+			rv, len, resp[2]);
+		rv = 0; /* Not fatal */
+		goto found;
+	}
+
+	if (resp[2] == 0) {
+		/* A successful return means the alert is supported. */
+		ssif_info->supports_alert = true;
+		ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
+	}
 
  found:
 	ssif_info->intf_num = atomic_inc_return(&next_intf);
@@ -1813,6 +1955,7 @@ static struct i2c_driver ssif_i2c_driver = {
 	},
 	.probe		= ssif_probe,
 	.remove		= ssif_remove,
+	.alert		= ssif_alert,
 	.id_table	= ssif_id,
 	.detect		= ssif_detect
 };
@@ -1832,7 +1975,7 @@ static int init_ipmi_ssif(void)
 		rv = new_ssif_client(addr[i], adapter_name[i],
 				     dbg[i], slave_addrs[i],
 				     SI_HARDCODED);
-		if (!rv)
+		if (rv)
 			pr_err(PFX
 			       "Couldn't add hardcoded device at addr 0x%x\n",
 			       addr[i]);

drivers/firmware/efi/runtime-map.c

@@ -120,7 +120,8 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr)
 	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry) {
 		kset_unregister(map_kset);
-		return entry;
+		map_kset = NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size,
@@ -132,6 +133,7 @@ add_sysfs_runtime_map_entry(struct kobject *kobj, int nr)
 	if (ret) {
 		kobject_put(&entry->kobj);
 		kset_unregister(map_kset);
+		map_kset = NULL;
 		return ERR_PTR(ret);
 	}
 
@@ -195,8 +197,6 @@ out_add_entry:
 		entry = *(map_entries + j);
 		kobject_put(&entry->kobj);
 	}
-	if (map_kset)
-		kset_unregister(map_kset);
 out:
 	return ret;
 }

drivers/gpio/gpio-omap.c

@@ -1054,38 +1054,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
 		dev_err(bank->dev, "Could not get gpio dbck\n");
 }
 
-static void
-omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
-		    unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
-				    handle_simple_irq);
-	if (!gc) {
-		dev_err(bank->dev, "Memory alloc failed for gc\n");
-		return;
-	}
-
-	ct = gc->chip_types;
-
-	/* NOTE: No ack required, reading IRQ status clears it. */
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_type = omap_gpio_irq_type;
-
-	if (bank->regs->wkup_en)
-		ct->chip.irq_set_wake = omap_gpio_wake_enable;
-
-	ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-}
-
 static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 {
-	int j;
 	static int gpio;
 	int irq_base = 0;
 	int ret;
@@ -1132,6 +1102,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 	}
 #endif
 
+	/* MPUIO is a bit different, reading IRQ status clears it */
+	if (bank->is_mpuio) {
+		irqc->irq_ack = dummy_irq_chip.irq_ack;
+		irqc->irq_mask = irq_gc_mask_set_bit;
+		irqc->irq_unmask = irq_gc_mask_clr_bit;
+		if (!bank->regs->wkup_en)
+			irqc->irq_set_wake = NULL;
+	}
+
 	ret = gpiochip_irqchip_add(&bank->chip, irqc,
 				   irq_base, omap_gpio_irq_handler,
 				   IRQ_TYPE_NONE);
@@ -1145,15 +1124,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
 	gpiochip_set_chained_irqchip(&bank->chip, irqc,
 				     bank->irq, omap_gpio_irq_handler);
 
-	for (j = 0; j < bank->width; j++) {
-		int irq = irq_find_mapping(bank->chip.irqdomain, j);
-		if (bank->is_mpuio) {
-			omap_mpuio_alloc_gc(bank, irq, bank->width);
-			irq_set_chip_and_handler(irq, NULL, NULL);
-			set_irq_flags(irq, 0);
-		}
-	}
-
 	return 0;
 }
 

drivers/gpio/gpiolib-acpi.c

@@ -550,7 +550,7 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 
 	length = min(agpio->pin_table_length, (u16)(pin_index + bits));
 	for (i = pin_index; i < length; ++i) {
-		unsigned pin = agpio->pin_table[i];
+		int pin = agpio->pin_table[i];
 		struct acpi_gpio_connection *conn;
 		struct gpio_desc *desc;
 		bool found;

drivers/gpio/gpiolib-sysfs.c

@@ -551,6 +551,7 @@ static struct class gpio_class = {
  */
 int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 {
+	struct gpio_chip	*chip;
 	unsigned long		flags;
 	int			status;
 	const char		*ioname = NULL;
@@ -568,8 +569,16 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
 		return -EINVAL;
 	}
 
+	chip = desc->chip;
+
 	mutex_lock(&sysfs_lock);
 
+	/* check if chip is being removed */
+	if (!chip || !chip->exported) {
+		status = -ENODEV;
+		goto fail_unlock;
+	}
+
 	spin_lock_irqsave(&gpio_lock, flags);
 	if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
 	     test_bit(FLAG_EXPORT, &desc->flags)) {
@@ -783,12 +792,15 @@ void gpiochip_unexport(struct gpio_chip *chip)
 {
 	int			status;
 	struct device		*dev;
+	struct gpio_desc *desc;
+	unsigned int i;
 
 	mutex_lock(&sysfs_lock);
 	dev = class_find_device(&gpio_class, NULL, chip, match_export);
 	if (dev) {
 		put_device(dev);
 		device_unregister(dev);
+		/* prevent further gpiod exports */
 		chip->exported = false;
 		status = 0;
 	} else
@@ -797,6 +809,13 @@ void gpiochip_unexport(struct gpio_chip *chip)
 
 	if (status)
 		chip_dbg(chip, "%s: status %d\n", __func__, status);
+
+	/* unregister gpiod class devices owned by sysfs */
+	for (i = 0; i < chip->ngpio; i++) {
+		desc = &chip->desc[i];
+		if (test_and_clear_bit(FLAG_SYSFS, &desc->flags))
+			gpiod_free(desc);
+	}
 }
 
 static int __init gpiolib_sysfs_init(void)

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

@@ -430,9 +430,10 @@ static int unregister_process_nocpsch(struct device_queue_manager *dqm,
 
 	BUG_ON(!dqm || !qpd);
 
-	BUG_ON(!list_empty(&qpd->queues_list));
+	pr_debug("In func %s\n", __func__);
 
-	pr_debug("kfd: In func %s\n", __func__);
+	pr_debug("qpd->queues_list is %s\n",
+			list_empty(&qpd->queues_list) ? "empty" : "not empty");
 
 	retval = 0;
 	mutex_lock(&dqm->lock);
@@ -882,6 +883,8 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q,
 		return -ENOMEM;
 	}
 
+	init_sdma_vm(dqm, q, qpd);
+
 	retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj,
 				&q->gart_mqd_addr, &q->properties);
 	if (retval != 0)

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

@@ -728,9 +728,9 @@ static ssize_t node_show(struct kobject *kobj, struct attribute *attr,
 		sysfs_show_32bit_prop(buffer, "max_engine_clk_fcompute",
 			dev->gpu->kfd2kgd->get_max_engine_clock_in_mhz(
 					dev->gpu->kgd));
+
 		sysfs_show_64bit_prop(buffer, "local_mem_size",
-			dev->gpu->kfd2kgd->get_vmem_size(
-					dev->gpu->kgd));
+				(unsigned long long int) 0);
 
 		sysfs_show_32bit_prop(buffer, "fw_version",
 			dev->gpu->kfd2kgd->get_fw_version(

drivers/gpu/drm/drm_irq.c

@@ -131,12 +131,11 @@ static void drm_update_vblank_count(struct drm_device *dev, int crtc)
 
 	/* Reinitialize corresponding vblank timestamp if high-precision query
 	 * available. Skip this step if query unsupported or failed. Will
-	 * reinitialize delayed at next vblank interrupt in that case.
+	 * reinitialize delayed at next vblank interrupt in that case and
+	 * assign 0 for now, to mark the vblanktimestamp as invalid.
 	 */
-	if (rc) {
-		tslot = atomic_read(&vblank->count) + diff;
-		vblanktimestamp(dev, crtc, tslot) = t_vblank;
-	}
+	tslot = atomic_read(&vblank->count) + diff;
+	vblanktimestamp(dev, crtc, tslot) = rc ? t_vblank : (struct timeval) {0, 0};
 
 	smp_mb__before_atomic();
 	atomic_add(diff, &vblank->count);

drivers/gpu/drm/i915/intel_display.c

@@ -13635,9 +13635,6 @@ static const struct intel_dmi_quirk intel_dmi_quirks[] = {
 };
 
 static struct intel_quirk intel_quirks[] = {
-	/* HP Mini needs pipe A force quirk (LP: #322104) */
-	{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
-
 	/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
 	{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },