|
@@ -1,3271 +0,0 @@
|
|
|
-/*
|
|
|
- * Copyright 2015 Advanced Micro Devices, Inc.
|
|
|
- *
|
|
|
- * Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
- * copy of this software and associated documentation files (the "Software"),
|
|
|
- * to deal in the Software without restriction, including without limitation
|
|
|
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
|
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
|
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
- * OTHER DEALINGS IN THE SOFTWARE.
|
|
|
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
- * and/or sell copies of the Software, and to permit persons to whom the
|
|
|
- * Software is furnished to do so, subject to the following conditions:
|
|
|
- *
|
|
|
- * The above copyright notice and this permission notice shall be included in
|
|
|
- * all copies or substantial portions of the Software.
|
|
|
- *
|
|
|
- *
|
|
|
- */
|
|
|
-
|
|
|
-#include "pp_debug.h"
|
|
|
-#include "tonga_smc.h"
|
|
|
-#include "smu7_dyn_defaults.h"
|
|
|
-
|
|
|
-#include "smu7_hwmgr.h"
|
|
|
-#include "hardwaremanager.h"
|
|
|
-#include "ppatomctrl.h"
|
|
|
-#include "cgs_common.h"
|
|
|
-#include "atombios.h"
|
|
|
-#include "tonga_smumgr.h"
|
|
|
-#include "pppcielanes.h"
|
|
|
-#include "pp_endian.h"
|
|
|
-#include "smu7_ppsmc.h"
|
|
|
-
|
|
|
-#include "smu72_discrete.h"
|
|
|
-
|
|
|
-#include "smu/smu_7_1_2_d.h"
|
|
|
-#include "smu/smu_7_1_2_sh_mask.h"
|
|
|
-
|
|
|
-#include "gmc/gmc_8_1_d.h"
|
|
|
-#include "gmc/gmc_8_1_sh_mask.h"
|
|
|
-
|
|
|
-#include "bif/bif_5_0_d.h"
|
|
|
-#include "bif/bif_5_0_sh_mask.h"
|
|
|
-
|
|
|
-#include "dce/dce_10_0_d.h"
|
|
|
-#include "dce/dce_10_0_sh_mask.h"
|
|
|
-
|
|
|
-
|
|
|
-#define VOLTAGE_SCALE 4
|
|
|
-#define POWERTUNE_DEFAULT_SET_MAX 1
|
|
|
-#define VOLTAGE_VID_OFFSET_SCALE1 625
|
|
|
-#define VOLTAGE_VID_OFFSET_SCALE2 100
|
|
|
-#define MC_CG_ARB_FREQ_F1 0x0b
|
|
|
-#define VDDC_VDDCI_DELTA 200
|
|
|
-
|
|
|
-
|
|
|
-static const struct tonga_pt_defaults tonga_power_tune_data_set_array[POWERTUNE_DEFAULT_SET_MAX] = {
|
|
|
-/* sviLoadLIneEn, SviLoadLineVddC, TDC_VDDC_ThrottleReleaseLimitPerc, TDC_MAWt,
|
|
|
- * TdcWaterfallCtl, DTEAmbientTempBase, DisplayCac, BAPM_TEMP_GRADIENT
|
|
|
- */
|
|
|
- {1, 0xF, 0xFD, 0x19,
|
|
|
- 5, 45, 0, 0xB0000,
|
|
|
- {0x79, 0x253, 0x25D, 0xAE, 0x72, 0x80, 0x83, 0x86, 0x6F, 0xC8,
|
|
|
- 0xC9, 0xC9, 0x2F, 0x4D, 0x61},
|
|
|
- {0x17C, 0x172, 0x180, 0x1BC, 0x1B3, 0x1BD, 0x206, 0x200, 0x203,
|
|
|
- 0x25D, 0x25A, 0x255, 0x2C3, 0x2C5, 0x2B4}
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
-/* [Fmin, Fmax, LDO_REFSEL, USE_FOR_LOW_FREQ] */
|
|
|
-static const uint16_t tonga_clock_stretcher_lookup_table[2][4] = {
|
|
|
- {600, 1050, 3, 0},
|
|
|
- {600, 1050, 6, 1}
|
|
|
-};
|
|
|
-
|
|
|
-/* [FF, SS] type, [] 4 voltage ranges,
|
|
|
- * and [Floor Freq, Boundary Freq, VID min , VID max]
|
|
|
- */
|
|
|
-static const uint32_t tonga_clock_stretcher_ddt_table[2][4][4] = {
|
|
|
- { {265, 529, 120, 128}, {325, 650, 96, 119}, {430, 860, 32, 95}, {0, 0, 0, 31} },
|
|
|
- { {275, 550, 104, 112}, {319, 638, 96, 103}, {360, 720, 64, 95}, {384, 768, 32, 63} }
|
|
|
-};
|
|
|
-
|
|
|
-/* [Use_For_Low_freq] value, [0%, 5%, 10%, 7.14%, 14.28%, 20%] */
|
|
|
-static const uint8_t tonga_clock_stretch_amount_conversion[2][6] = {
|
|
|
- {0, 1, 3, 2, 4, 5},
|
|
|
- {0, 2, 4, 5, 6, 5}
|
|
|
-};
|
|
|
-
|
|
|
-/* PPGen has the gain setting generated in x * 100 unit
|
|
|
- * This function is to convert the unit to x * 4096(0x1000) unit.
|
|
|
- * This is the unit expected by SMC firmware
|
|
|
- */
|
|
|
-
|
|
|
-
|
|
|
-static int tonga_get_dependency_volt_by_clk(struct pp_hwmgr *hwmgr,
|
|
|
- phm_ppt_v1_clock_voltage_dependency_table *allowed_clock_voltage_table,
|
|
|
- uint32_t clock, SMU_VoltageLevel *voltage, uint32_t *mvdd)
|
|
|
-{
|
|
|
- uint32_t i = 0;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- /* clock - voltage dependency table is empty table */
|
|
|
- if (allowed_clock_voltage_table->count == 0)
|
|
|
- return -EINVAL;
|
|
|
-
|
|
|
- for (i = 0; i < allowed_clock_voltage_table->count; i++) {
|
|
|
- /* find first sclk bigger than request */
|
|
|
- if (allowed_clock_voltage_table->entries[i].clk >= clock) {
|
|
|
- voltage->VddGfx = phm_get_voltage_index(
|
|
|
- pptable_info->vddgfx_lookup_table,
|
|
|
- allowed_clock_voltage_table->entries[i].vddgfx);
|
|
|
- voltage->Vddc = phm_get_voltage_index(
|
|
|
- pptable_info->vddc_lookup_table,
|
|
|
- allowed_clock_voltage_table->entries[i].vddc);
|
|
|
-
|
|
|
- if (allowed_clock_voltage_table->entries[i].vddci)
|
|
|
- voltage->Vddci =
|
|
|
- phm_get_voltage_id(&data->vddci_voltage_table, allowed_clock_voltage_table->entries[i].vddci);
|
|
|
- else
|
|
|
- voltage->Vddci =
|
|
|
- phm_get_voltage_id(&data->vddci_voltage_table,
|
|
|
- allowed_clock_voltage_table->entries[i].vddc - VDDC_VDDCI_DELTA);
|
|
|
-
|
|
|
-
|
|
|
- if (allowed_clock_voltage_table->entries[i].mvdd)
|
|
|
- *mvdd = (uint32_t) allowed_clock_voltage_table->entries[i].mvdd;
|
|
|
-
|
|
|
- voltage->Phases = 1;
|
|
|
- return 0;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- /* sclk is bigger than max sclk in the dependence table */
|
|
|
- voltage->VddGfx = phm_get_voltage_index(pptable_info->vddgfx_lookup_table,
|
|
|
- allowed_clock_voltage_table->entries[i-1].vddgfx);
|
|
|
- voltage->Vddc = phm_get_voltage_index(pptable_info->vddc_lookup_table,
|
|
|
- allowed_clock_voltage_table->entries[i-1].vddc);
|
|
|
-
|
|
|
- if (allowed_clock_voltage_table->entries[i-1].vddci)
|
|
|
- voltage->Vddci = phm_get_voltage_id(&data->vddci_voltage_table,
|
|
|
- allowed_clock_voltage_table->entries[i-1].vddci);
|
|
|
-
|
|
|
- if (allowed_clock_voltage_table->entries[i-1].mvdd)
|
|
|
- *mvdd = (uint32_t) allowed_clock_voltage_table->entries[i-1].mvdd;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/**
|
|
|
- * Vddc table preparation for SMC.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param table the SMC DPM table structure to be populated
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-static int tonga_populate_smc_vddc_table(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- unsigned int count;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->voltage_control) {
|
|
|
- table->VddcLevelCount = data->vddc_voltage_table.count;
|
|
|
- for (count = 0; count < table->VddcLevelCount; count++) {
|
|
|
- table->VddcTable[count] =
|
|
|
- PP_HOST_TO_SMC_US(data->vddc_voltage_table.entries[count].value * VOLTAGE_SCALE);
|
|
|
- }
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->VddcLevelCount);
|
|
|
- }
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * VddGfx table preparation for SMC.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param table the SMC DPM table structure to be populated
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-static int tonga_populate_smc_vdd_gfx_table(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- unsigned int count;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->vdd_gfx_control) {
|
|
|
- table->VddGfxLevelCount = data->vddgfx_voltage_table.count;
|
|
|
- for (count = 0; count < data->vddgfx_voltage_table.count; count++) {
|
|
|
- table->VddGfxTable[count] =
|
|
|
- PP_HOST_TO_SMC_US(data->vddgfx_voltage_table.entries[count].value * VOLTAGE_SCALE);
|
|
|
- }
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->VddGfxLevelCount);
|
|
|
- }
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Vddci table preparation for SMC.
|
|
|
- *
|
|
|
- * @param *hwmgr The address of the hardware manager.
|
|
|
- * @param *table The SMC DPM table structure to be populated.
|
|
|
- * @return 0
|
|
|
- */
|
|
|
-static int tonga_populate_smc_vdd_ci_table(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- uint32_t count;
|
|
|
-
|
|
|
- table->VddciLevelCount = data->vddci_voltage_table.count;
|
|
|
- for (count = 0; count < table->VddciLevelCount; count++) {
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) {
|
|
|
- table->VddciTable[count] =
|
|
|
- PP_HOST_TO_SMC_US(data->vddci_voltage_table.entries[count].value * VOLTAGE_SCALE);
|
|
|
- } else if (SMU7_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) {
|
|
|
- table->SmioTable1.Pattern[count].Voltage =
|
|
|
- PP_HOST_TO_SMC_US(data->vddci_voltage_table.entries[count].value * VOLTAGE_SCALE);
|
|
|
- /* Index into DpmTable.Smio. Drive bits from Smio entry to get this voltage level. */
|
|
|
- table->SmioTable1.Pattern[count].Smio =
|
|
|
- (uint8_t) count;
|
|
|
- table->Smio[count] |=
|
|
|
- data->vddci_voltage_table.entries[count].smio_low;
|
|
|
- table->VddciTable[count] =
|
|
|
- PP_HOST_TO_SMC_US(data->vddci_voltage_table.entries[count].value * VOLTAGE_SCALE);
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- table->SmioMask1 = data->vddci_voltage_table.mask_low;
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->VddciLevelCount);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Mvdd table preparation for SMC.
|
|
|
- *
|
|
|
- * @param *hwmgr The address of the hardware manager.
|
|
|
- * @param *table The SMC DPM table structure to be populated.
|
|
|
- * @return 0
|
|
|
- */
|
|
|
-static int tonga_populate_smc_mvdd_table(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- uint32_t count;
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_GPIO == data->mvdd_control) {
|
|
|
- table->MvddLevelCount = data->mvdd_voltage_table.count;
|
|
|
- for (count = 0; count < table->MvddLevelCount; count++) {
|
|
|
- table->SmioTable2.Pattern[count].Voltage =
|
|
|
- PP_HOST_TO_SMC_US(data->mvdd_voltage_table.entries[count].value * VOLTAGE_SCALE);
|
|
|
- /* Index into DpmTable.Smio. Drive bits from Smio entry to get this voltage level.*/
|
|
|
- table->SmioTable2.Pattern[count].Smio =
|
|
|
- (uint8_t) count;
|
|
|
- table->Smio[count] |=
|
|
|
- data->mvdd_voltage_table.entries[count].smio_low;
|
|
|
- }
|
|
|
- table->SmioMask2 = data->mvdd_voltage_table.mask_low;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->MvddLevelCount);
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Preparation of vddc and vddgfx CAC tables for SMC.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param table the SMC DPM table structure to be populated
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-static int tonga_populate_cac_tables(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- uint32_t count;
|
|
|
- uint8_t index = 0;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- struct phm_ppt_v1_voltage_lookup_table *vddgfx_lookup_table =
|
|
|
- pptable_info->vddgfx_lookup_table;
|
|
|
- struct phm_ppt_v1_voltage_lookup_table *vddc_lookup_table =
|
|
|
- pptable_info->vddc_lookup_table;
|
|
|
-
|
|
|
- /* table is already swapped, so in order to use the value from it
|
|
|
- * we need to swap it back.
|
|
|
- */
|
|
|
- uint32_t vddc_level_count = PP_SMC_TO_HOST_UL(table->VddcLevelCount);
|
|
|
- uint32_t vddgfx_level_count = PP_SMC_TO_HOST_UL(table->VddGfxLevelCount);
|
|
|
-
|
|
|
- for (count = 0; count < vddc_level_count; count++) {
|
|
|
- /* We are populating vddc CAC data to BapmVddc table in split and merged mode */
|
|
|
- index = phm_get_voltage_index(vddc_lookup_table,
|
|
|
- data->vddc_voltage_table.entries[count].value);
|
|
|
- table->BapmVddcVidLoSidd[count] =
|
|
|
- convert_to_vid(vddc_lookup_table->entries[index].us_cac_low);
|
|
|
- table->BapmVddcVidHiSidd[count] =
|
|
|
- convert_to_vid(vddc_lookup_table->entries[index].us_cac_mid);
|
|
|
- table->BapmVddcVidHiSidd2[count] =
|
|
|
- convert_to_vid(vddc_lookup_table->entries[index].us_cac_high);
|
|
|
- }
|
|
|
-
|
|
|
- if ((data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2)) {
|
|
|
- /* We are populating vddgfx CAC data to BapmVddgfx table in split mode */
|
|
|
- for (count = 0; count < vddgfx_level_count; count++) {
|
|
|
- index = phm_get_voltage_index(vddgfx_lookup_table,
|
|
|
- convert_to_vid(vddgfx_lookup_table->entries[index].us_cac_mid));
|
|
|
- table->BapmVddGfxVidHiSidd2[count] =
|
|
|
- convert_to_vid(vddgfx_lookup_table->entries[index].us_cac_high);
|
|
|
- }
|
|
|
- } else {
|
|
|
- for (count = 0; count < vddc_level_count; count++) {
|
|
|
- index = phm_get_voltage_index(vddc_lookup_table,
|
|
|
- data->vddc_voltage_table.entries[count].value);
|
|
|
- table->BapmVddGfxVidLoSidd[count] =
|
|
|
- convert_to_vid(vddc_lookup_table->entries[index].us_cac_low);
|
|
|
- table->BapmVddGfxVidHiSidd[count] =
|
|
|
- convert_to_vid(vddc_lookup_table->entries[index].us_cac_mid);
|
|
|
- table->BapmVddGfxVidHiSidd2[count] =
|
|
|
- convert_to_vid(vddc_lookup_table->entries[index].us_cac_high);
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Preparation of voltage tables for SMC.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param table the SMC DPM table structure to be populated
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-
|
|
|
-static int tonga_populate_smc_voltage_tables(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result;
|
|
|
-
|
|
|
- result = tonga_populate_smc_vddc_table(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "can not populate VDDC voltage table to SMC",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- result = tonga_populate_smc_vdd_ci_table(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "can not populate VDDCI voltage table to SMC",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- result = tonga_populate_smc_vdd_gfx_table(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "can not populate VDDGFX voltage table to SMC",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- result = tonga_populate_smc_mvdd_table(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "can not populate MVDD voltage table to SMC",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- result = tonga_populate_cac_tables(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "can not populate CAC voltage tables to SMC",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_ulv_level(struct pp_hwmgr *hwmgr,
|
|
|
- struct SMU72_Discrete_Ulv *state)
|
|
|
-{
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- state->CcPwrDynRm = 0;
|
|
|
- state->CcPwrDynRm1 = 0;
|
|
|
-
|
|
|
- state->VddcOffset = (uint16_t) table_info->us_ulv_voltage_offset;
|
|
|
- state->VddcOffsetVid = (uint8_t)(table_info->us_ulv_voltage_offset *
|
|
|
- VOLTAGE_VID_OFFSET_SCALE2 / VOLTAGE_VID_OFFSET_SCALE1);
|
|
|
-
|
|
|
- state->VddcPhase = 1;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(state->CcPwrDynRm);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(state->CcPwrDynRm1);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(state->VddcOffset);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_ulv_state(struct pp_hwmgr *hwmgr,
|
|
|
- struct SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- return tonga_populate_ulv_level(hwmgr, &table->Ulv);
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_smc_link_level(struct pp_hwmgr *hwmgr, SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct smu7_dpm_table *dpm_table = &data->dpm_table;
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t i;
|
|
|
-
|
|
|
- /* Index (dpm_table->pcie_speed_table.count) is reserved for PCIE boot level. */
|
|
|
- for (i = 0; i <= dpm_table->pcie_speed_table.count; i++) {
|
|
|
- table->LinkLevel[i].PcieGenSpeed =
|
|
|
- (uint8_t)dpm_table->pcie_speed_table.dpm_levels[i].value;
|
|
|
- table->LinkLevel[i].PcieLaneCount =
|
|
|
- (uint8_t)encode_pcie_lane_width(dpm_table->pcie_speed_table.dpm_levels[i].param1);
|
|
|
- table->LinkLevel[i].EnabledForActivity =
|
|
|
- 1;
|
|
|
- table->LinkLevel[i].SPC =
|
|
|
- (uint8_t)(data->pcie_spc_cap & 0xff);
|
|
|
- table->LinkLevel[i].DownThreshold =
|
|
|
- PP_HOST_TO_SMC_UL(5);
|
|
|
- table->LinkLevel[i].UpThreshold =
|
|
|
- PP_HOST_TO_SMC_UL(30);
|
|
|
- }
|
|
|
-
|
|
|
- smu_data->smc_state_table.LinkLevelCount =
|
|
|
- (uint8_t)dpm_table->pcie_speed_table.count;
|
|
|
- data->dpm_level_enable_mask.pcie_dpm_enable_mask =
|
|
|
- phm_get_dpm_level_enable_mask_value(&dpm_table->pcie_speed_table);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Calculates the SCLK dividers using the provided engine clock
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param engine_clock the engine clock to use to populate the structure
|
|
|
- * @param sclk the SMC SCLK structure to be populated
|
|
|
- */
|
|
|
-static int tonga_calculate_sclk_params(struct pp_hwmgr *hwmgr,
|
|
|
- uint32_t engine_clock, SMU72_Discrete_GraphicsLevel *sclk)
|
|
|
-{
|
|
|
- const struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- pp_atomctrl_clock_dividers_vi dividers;
|
|
|
- uint32_t spll_func_cntl = data->clock_registers.vCG_SPLL_FUNC_CNTL;
|
|
|
- uint32_t spll_func_cntl_3 = data->clock_registers.vCG_SPLL_FUNC_CNTL_3;
|
|
|
- uint32_t spll_func_cntl_4 = data->clock_registers.vCG_SPLL_FUNC_CNTL_4;
|
|
|
- uint32_t cg_spll_spread_spectrum = data->clock_registers.vCG_SPLL_SPREAD_SPECTRUM;
|
|
|
- uint32_t cg_spll_spread_spectrum_2 = data->clock_registers.vCG_SPLL_SPREAD_SPECTRUM_2;
|
|
|
- uint32_t reference_clock;
|
|
|
- uint32_t reference_divider;
|
|
|
- uint32_t fbdiv;
|
|
|
- int result;
|
|
|
-
|
|
|
- /* get the engine clock dividers for this clock value*/
|
|
|
- result = atomctrl_get_engine_pll_dividers_vi(hwmgr, engine_clock, ÷rs);
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE(result == 0,
|
|
|
- "Error retrieving Engine Clock dividers from VBIOS.", return result);
|
|
|
-
|
|
|
- /* To get FBDIV we need to multiply this by 16384 and divide it by Fref.*/
|
|
|
- reference_clock = atomctrl_get_reference_clock(hwmgr);
|
|
|
-
|
|
|
- reference_divider = 1 + dividers.uc_pll_ref_div;
|
|
|
-
|
|
|
- /* low 14 bits is fraction and high 12 bits is divider*/
|
|
|
- fbdiv = dividers.ul_fb_div.ul_fb_divider & 0x3FFFFFF;
|
|
|
-
|
|
|
- /* SPLL_FUNC_CNTL setup*/
|
|
|
- spll_func_cntl = PHM_SET_FIELD(spll_func_cntl,
|
|
|
- CG_SPLL_FUNC_CNTL, SPLL_REF_DIV, dividers.uc_pll_ref_div);
|
|
|
- spll_func_cntl = PHM_SET_FIELD(spll_func_cntl,
|
|
|
- CG_SPLL_FUNC_CNTL, SPLL_PDIV_A, dividers.uc_pll_post_div);
|
|
|
-
|
|
|
- /* SPLL_FUNC_CNTL_3 setup*/
|
|
|
- spll_func_cntl_3 = PHM_SET_FIELD(spll_func_cntl_3,
|
|
|
- CG_SPLL_FUNC_CNTL_3, SPLL_FB_DIV, fbdiv);
|
|
|
-
|
|
|
- /* set to use fractional accumulation*/
|
|
|
- spll_func_cntl_3 = PHM_SET_FIELD(spll_func_cntl_3,
|
|
|
- CG_SPLL_FUNC_CNTL_3, SPLL_DITHEN, 1);
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_EngineSpreadSpectrumSupport)) {
|
|
|
- pp_atomctrl_internal_ss_info ss_info;
|
|
|
-
|
|
|
- uint32_t vcoFreq = engine_clock * dividers.uc_pll_post_div;
|
|
|
- if (0 == atomctrl_get_engine_clock_spread_spectrum(hwmgr, vcoFreq, &ss_info)) {
|
|
|
- /*
|
|
|
- * ss_info.speed_spectrum_percentage -- in unit of 0.01%
|
|
|
- * ss_info.speed_spectrum_rate -- in unit of khz
|
|
|
- */
|
|
|
- /* clks = reference_clock * 10 / (REFDIV + 1) / speed_spectrum_rate / 2 */
|
|
|
- uint32_t clkS = reference_clock * 5 / (reference_divider * ss_info.speed_spectrum_rate);
|
|
|
-
|
|
|
- /* clkv = 2 * D * fbdiv / NS */
|
|
|
- uint32_t clkV = 4 * ss_info.speed_spectrum_percentage * fbdiv / (clkS * 10000);
|
|
|
-
|
|
|
- cg_spll_spread_spectrum =
|
|
|
- PHM_SET_FIELD(cg_spll_spread_spectrum, CG_SPLL_SPREAD_SPECTRUM, CLKS, clkS);
|
|
|
- cg_spll_spread_spectrum =
|
|
|
- PHM_SET_FIELD(cg_spll_spread_spectrum, CG_SPLL_SPREAD_SPECTRUM, SSEN, 1);
|
|
|
- cg_spll_spread_spectrum_2 =
|
|
|
- PHM_SET_FIELD(cg_spll_spread_spectrum_2, CG_SPLL_SPREAD_SPECTRUM_2, CLKV, clkV);
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- sclk->SclkFrequency = engine_clock;
|
|
|
- sclk->CgSpllFuncCntl3 = spll_func_cntl_3;
|
|
|
- sclk->CgSpllFuncCntl4 = spll_func_cntl_4;
|
|
|
- sclk->SpllSpreadSpectrum = cg_spll_spread_spectrum;
|
|
|
- sclk->SpllSpreadSpectrum2 = cg_spll_spread_spectrum_2;
|
|
|
- sclk->SclkDid = (uint8_t)dividers.pll_post_divider;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Populates single SMC SCLK structure using the provided engine clock
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param engine_clock the engine clock to use to populate the structure
|
|
|
- * @param sclk the SMC SCLK structure to be populated
|
|
|
- */
|
|
|
-static int tonga_populate_single_graphic_level(struct pp_hwmgr *hwmgr,
|
|
|
- uint32_t engine_clock,
|
|
|
- uint16_t sclk_activity_level_threshold,
|
|
|
- SMU72_Discrete_GraphicsLevel *graphic_level)
|
|
|
-{
|
|
|
- int result;
|
|
|
- uint32_t mvdd;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- result = tonga_calculate_sclk_params(hwmgr, engine_clock, graphic_level);
|
|
|
-
|
|
|
- /* populate graphics levels*/
|
|
|
- result = tonga_get_dependency_volt_by_clk(hwmgr,
|
|
|
- pptable_info->vdd_dep_on_sclk, engine_clock,
|
|
|
- &graphic_level->MinVoltage, &mvdd);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "can not find VDDC voltage value for VDDC "
|
|
|
- "engine clock dependency table", return result);
|
|
|
-
|
|
|
- /* SCLK frequency in units of 10KHz*/
|
|
|
- graphic_level->SclkFrequency = engine_clock;
|
|
|
- /* Indicates maximum activity level for this performance level. 50% for now*/
|
|
|
- graphic_level->ActivityLevel = sclk_activity_level_threshold;
|
|
|
-
|
|
|
- graphic_level->CcPwrDynRm = 0;
|
|
|
- graphic_level->CcPwrDynRm1 = 0;
|
|
|
- /* this level can be used if activity is high enough.*/
|
|
|
- graphic_level->EnabledForActivity = 0;
|
|
|
- /* this level can be used for throttling.*/
|
|
|
- graphic_level->EnabledForThrottle = 1;
|
|
|
- graphic_level->UpHyst = 0;
|
|
|
- graphic_level->DownHyst = 0;
|
|
|
- graphic_level->VoltageDownHyst = 0;
|
|
|
- graphic_level->PowerThrottle = 0;
|
|
|
-
|
|
|
- data->display_timing.min_clock_in_sr =
|
|
|
- hwmgr->display_config.min_core_set_clock_in_sr;
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_SclkDeepSleep))
|
|
|
- graphic_level->DeepSleepDivId =
|
|
|
- smu7_get_sleep_divider_id_from_clock(engine_clock,
|
|
|
- data->display_timing.min_clock_in_sr);
|
|
|
-
|
|
|
- /* Default to slow, highest DPM level will be set to PPSMC_DISPLAY_WATERMARK_LOW later.*/
|
|
|
- graphic_level->DisplayWatermark = PPSMC_DISPLAY_WATERMARK_LOW;
|
|
|
-
|
|
|
- if (!result) {
|
|
|
- /* CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->MinVoltage);*/
|
|
|
- /* CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->MinVddcPhases);*/
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->SclkFrequency);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(graphic_level->ActivityLevel);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->CgSpllFuncCntl3);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->CgSpllFuncCntl4);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->SpllSpreadSpectrum);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->SpllSpreadSpectrum2);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->CcPwrDynRm);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(graphic_level->CcPwrDynRm1);
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Populates all SMC SCLK levels' structure based on the trimmed allowed dpm engine clock states
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- */
|
|
|
-int tonga_populate_all_graphic_levels(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info = (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- struct smu7_dpm_table *dpm_table = &data->dpm_table;
|
|
|
- struct phm_ppt_v1_pcie_table *pcie_table = pptable_info->pcie_table;
|
|
|
- uint8_t pcie_entry_count = (uint8_t) data->dpm_table.pcie_speed_table.count;
|
|
|
- uint32_t level_array_address = smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable, GraphicsLevel);
|
|
|
-
|
|
|
- uint32_t level_array_size = sizeof(SMU72_Discrete_GraphicsLevel) *
|
|
|
- SMU72_MAX_LEVELS_GRAPHICS;
|
|
|
-
|
|
|
- SMU72_Discrete_GraphicsLevel *levels = smu_data->smc_state_table.GraphicsLevel;
|
|
|
-
|
|
|
- uint32_t i, max_entry;
|
|
|
- uint8_t highest_pcie_level_enabled = 0;
|
|
|
- uint8_t lowest_pcie_level_enabled = 0, mid_pcie_level_enabled = 0;
|
|
|
- uint8_t count = 0;
|
|
|
- int result = 0;
|
|
|
-
|
|
|
- memset(levels, 0x00, level_array_size);
|
|
|
-
|
|
|
- for (i = 0; i < dpm_table->sclk_table.count; i++) {
|
|
|
- result = tonga_populate_single_graphic_level(hwmgr,
|
|
|
- dpm_table->sclk_table.dpm_levels[i].value,
|
|
|
- (uint16_t)smu_data->activity_target[i],
|
|
|
- &(smu_data->smc_state_table.GraphicsLevel[i]));
|
|
|
- if (result != 0)
|
|
|
- return result;
|
|
|
-
|
|
|
- /* Making sure only DPM level 0-1 have Deep Sleep Div ID populated. */
|
|
|
- if (i > 1)
|
|
|
- smu_data->smc_state_table.GraphicsLevel[i].DeepSleepDivId = 0;
|
|
|
- }
|
|
|
-
|
|
|
- /* Only enable level 0 for now. */
|
|
|
- smu_data->smc_state_table.GraphicsLevel[0].EnabledForActivity = 1;
|
|
|
-
|
|
|
- /* set highest level watermark to high */
|
|
|
- if (dpm_table->sclk_table.count > 1)
|
|
|
- smu_data->smc_state_table.GraphicsLevel[dpm_table->sclk_table.count-1].DisplayWatermark =
|
|
|
- PPSMC_DISPLAY_WATERMARK_HIGH;
|
|
|
-
|
|
|
- smu_data->smc_state_table.GraphicsDpmLevelCount =
|
|
|
- (uint8_t)dpm_table->sclk_table.count;
|
|
|
- data->dpm_level_enable_mask.sclk_dpm_enable_mask =
|
|
|
- phm_get_dpm_level_enable_mask_value(&dpm_table->sclk_table);
|
|
|
-
|
|
|
- if (pcie_table != NULL) {
|
|
|
- PP_ASSERT_WITH_CODE((pcie_entry_count >= 1),
|
|
|
- "There must be 1 or more PCIE levels defined in PPTable.",
|
|
|
- return -EINVAL);
|
|
|
- max_entry = pcie_entry_count - 1; /* for indexing, we need to decrement by 1.*/
|
|
|
- for (i = 0; i < dpm_table->sclk_table.count; i++) {
|
|
|
- smu_data->smc_state_table.GraphicsLevel[i].pcieDpmLevel =
|
|
|
- (uint8_t) ((i < max_entry) ? i : max_entry);
|
|
|
- }
|
|
|
- } else {
|
|
|
- if (0 == data->dpm_level_enable_mask.pcie_dpm_enable_mask)
|
|
|
- pr_err("Pcie Dpm Enablemask is 0 !");
|
|
|
-
|
|
|
- while (data->dpm_level_enable_mask.pcie_dpm_enable_mask &&
|
|
|
- ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
|
|
|
- (1<<(highest_pcie_level_enabled+1))) != 0)) {
|
|
|
- highest_pcie_level_enabled++;
|
|
|
- }
|
|
|
-
|
|
|
- while (data->dpm_level_enable_mask.pcie_dpm_enable_mask &&
|
|
|
- ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
|
|
|
- (1<<lowest_pcie_level_enabled)) == 0)) {
|
|
|
- lowest_pcie_level_enabled++;
|
|
|
- }
|
|
|
-
|
|
|
- while ((count < highest_pcie_level_enabled) &&
|
|
|
- ((data->dpm_level_enable_mask.pcie_dpm_enable_mask &
|
|
|
- (1<<(lowest_pcie_level_enabled+1+count))) == 0)) {
|
|
|
- count++;
|
|
|
- }
|
|
|
- mid_pcie_level_enabled = (lowest_pcie_level_enabled+1+count) < highest_pcie_level_enabled ?
|
|
|
- (lowest_pcie_level_enabled+1+count) : highest_pcie_level_enabled;
|
|
|
-
|
|
|
-
|
|
|
- /* set pcieDpmLevel to highest_pcie_level_enabled*/
|
|
|
- for (i = 2; i < dpm_table->sclk_table.count; i++)
|
|
|
- smu_data->smc_state_table.GraphicsLevel[i].pcieDpmLevel = highest_pcie_level_enabled;
|
|
|
-
|
|
|
- /* set pcieDpmLevel to lowest_pcie_level_enabled*/
|
|
|
- smu_data->smc_state_table.GraphicsLevel[0].pcieDpmLevel = lowest_pcie_level_enabled;
|
|
|
-
|
|
|
- /* set pcieDpmLevel to mid_pcie_level_enabled*/
|
|
|
- smu_data->smc_state_table.GraphicsLevel[1].pcieDpmLevel = mid_pcie_level_enabled;
|
|
|
- }
|
|
|
- /* level count will send to smc once at init smc table and never change*/
|
|
|
- result = smu7_copy_bytes_to_smc(hwmgr, level_array_address,
|
|
|
- (uint8_t *)levels, (uint32_t)level_array_size,
|
|
|
- SMC_RAM_END);
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Populates the SMC MCLK structure using the provided memory clock
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param memory_clock the memory clock to use to populate the structure
|
|
|
- * @param sclk the SMC SCLK structure to be populated
|
|
|
- */
|
|
|
-static int tonga_calculate_mclk_params(
|
|
|
- struct pp_hwmgr *hwmgr,
|
|
|
- uint32_t memory_clock,
|
|
|
- SMU72_Discrete_MemoryLevel *mclk,
|
|
|
- bool strobe_mode,
|
|
|
- bool dllStateOn
|
|
|
- )
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
-
|
|
|
- uint32_t dll_cntl = data->clock_registers.vDLL_CNTL;
|
|
|
- uint32_t mclk_pwrmgt_cntl = data->clock_registers.vMCLK_PWRMGT_CNTL;
|
|
|
- uint32_t mpll_ad_func_cntl = data->clock_registers.vMPLL_AD_FUNC_CNTL;
|
|
|
- uint32_t mpll_dq_func_cntl = data->clock_registers.vMPLL_DQ_FUNC_CNTL;
|
|
|
- uint32_t mpll_func_cntl = data->clock_registers.vMPLL_FUNC_CNTL;
|
|
|
- uint32_t mpll_func_cntl_1 = data->clock_registers.vMPLL_FUNC_CNTL_1;
|
|
|
- uint32_t mpll_func_cntl_2 = data->clock_registers.vMPLL_FUNC_CNTL_2;
|
|
|
- uint32_t mpll_ss1 = data->clock_registers.vMPLL_SS1;
|
|
|
- uint32_t mpll_ss2 = data->clock_registers.vMPLL_SS2;
|
|
|
-
|
|
|
- pp_atomctrl_memory_clock_param mpll_param;
|
|
|
- int result;
|
|
|
-
|
|
|
- result = atomctrl_get_memory_pll_dividers_si(hwmgr,
|
|
|
- memory_clock, &mpll_param, strobe_mode);
|
|
|
- PP_ASSERT_WITH_CODE(
|
|
|
- !result,
|
|
|
- "Error retrieving Memory Clock Parameters from VBIOS.",
|
|
|
- return result);
|
|
|
-
|
|
|
- /* MPLL_FUNC_CNTL setup*/
|
|
|
- mpll_func_cntl = PHM_SET_FIELD(mpll_func_cntl, MPLL_FUNC_CNTL, BWCTRL,
|
|
|
- mpll_param.bw_ctrl);
|
|
|
-
|
|
|
- /* MPLL_FUNC_CNTL_1 setup*/
|
|
|
- mpll_func_cntl_1 = PHM_SET_FIELD(mpll_func_cntl_1,
|
|
|
- MPLL_FUNC_CNTL_1, CLKF,
|
|
|
- mpll_param.mpll_fb_divider.cl_kf);
|
|
|
- mpll_func_cntl_1 = PHM_SET_FIELD(mpll_func_cntl_1,
|
|
|
- MPLL_FUNC_CNTL_1, CLKFRAC,
|
|
|
- mpll_param.mpll_fb_divider.clk_frac);
|
|
|
- mpll_func_cntl_1 = PHM_SET_FIELD(mpll_func_cntl_1,
|
|
|
- MPLL_FUNC_CNTL_1, VCO_MODE,
|
|
|
- mpll_param.vco_mode);
|
|
|
-
|
|
|
- /* MPLL_AD_FUNC_CNTL setup*/
|
|
|
- mpll_ad_func_cntl = PHM_SET_FIELD(mpll_ad_func_cntl,
|
|
|
- MPLL_AD_FUNC_CNTL, YCLK_POST_DIV,
|
|
|
- mpll_param.mpll_post_divider);
|
|
|
-
|
|
|
- if (data->is_memory_gddr5) {
|
|
|
- /* MPLL_DQ_FUNC_CNTL setup*/
|
|
|
- mpll_dq_func_cntl = PHM_SET_FIELD(mpll_dq_func_cntl,
|
|
|
- MPLL_DQ_FUNC_CNTL, YCLK_SEL,
|
|
|
- mpll_param.yclk_sel);
|
|
|
- mpll_dq_func_cntl = PHM_SET_FIELD(mpll_dq_func_cntl,
|
|
|
- MPLL_DQ_FUNC_CNTL, YCLK_POST_DIV,
|
|
|
- mpll_param.mpll_post_divider);
|
|
|
- }
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_MemorySpreadSpectrumSupport)) {
|
|
|
- /*
|
|
|
- ************************************
|
|
|
- Fref = Reference Frequency
|
|
|
- NF = Feedback divider ratio
|
|
|
- NR = Reference divider ratio
|
|
|
- Fnom = Nominal VCO output frequency = Fref * NF / NR
|
|
|
- Fs = Spreading Rate
|
|
|
- D = Percentage down-spread / 2
|
|
|
- Fint = Reference input frequency to PFD = Fref / NR
|
|
|
- NS = Spreading rate divider ratio = int(Fint / (2 * Fs))
|
|
|
- CLKS = NS - 1 = ISS_STEP_NUM[11:0]
|
|
|
- NV = D * Fs / Fnom * 4 * ((Fnom/Fref * NR) ^ 2)
|
|
|
- CLKV = 65536 * NV = ISS_STEP_SIZE[25:0]
|
|
|
- *************************************
|
|
|
- */
|
|
|
- pp_atomctrl_internal_ss_info ss_info;
|
|
|
- uint32_t freq_nom;
|
|
|
- uint32_t tmp;
|
|
|
- uint32_t reference_clock = atomctrl_get_mpll_reference_clock(hwmgr);
|
|
|
-
|
|
|
- /* for GDDR5 for all modes and DDR3 */
|
|
|
- if (1 == mpll_param.qdr)
|
|
|
- freq_nom = memory_clock * 4 * (1 << mpll_param.mpll_post_divider);
|
|
|
- else
|
|
|
- freq_nom = memory_clock * 2 * (1 << mpll_param.mpll_post_divider);
|
|
|
-
|
|
|
- /* tmp = (freq_nom / reference_clock * reference_divider) ^ 2 Note: S.I. reference_divider = 1*/
|
|
|
- tmp = (freq_nom / reference_clock);
|
|
|
- tmp = tmp * tmp;
|
|
|
-
|
|
|
- if (0 == atomctrl_get_memory_clock_spread_spectrum(hwmgr, freq_nom, &ss_info)) {
|
|
|
- /* ss_info.speed_spectrum_percentage -- in unit of 0.01% */
|
|
|
- /* ss.Info.speed_spectrum_rate -- in unit of khz */
|
|
|
- /* CLKS = reference_clock / (2 * speed_spectrum_rate * reference_divider) * 10 */
|
|
|
- /* = reference_clock * 5 / speed_spectrum_rate */
|
|
|
- uint32_t clks = reference_clock * 5 / ss_info.speed_spectrum_rate;
|
|
|
-
|
|
|
- /* CLKV = 65536 * speed_spectrum_percentage / 2 * spreadSpecrumRate / freq_nom * 4 / 100000 * ((freq_nom / reference_clock) ^ 2) */
|
|
|
- /* = 131 * speed_spectrum_percentage * speed_spectrum_rate / 100 * ((freq_nom / reference_clock) ^ 2) / freq_nom */
|
|
|
- uint32_t clkv =
|
|
|
- (uint32_t)((((131 * ss_info.speed_spectrum_percentage *
|
|
|
- ss_info.speed_spectrum_rate) / 100) * tmp) / freq_nom);
|
|
|
-
|
|
|
- mpll_ss1 = PHM_SET_FIELD(mpll_ss1, MPLL_SS1, CLKV, clkv);
|
|
|
- mpll_ss2 = PHM_SET_FIELD(mpll_ss2, MPLL_SS2, CLKS, clks);
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- /* MCLK_PWRMGT_CNTL setup */
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, DLL_SPEED, mpll_param.dll_speed);
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, MRDCK0_PDNB, dllStateOn);
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, MRDCK1_PDNB, dllStateOn);
|
|
|
-
|
|
|
- /* Save the result data to outpupt memory level structure */
|
|
|
- mclk->MclkFrequency = memory_clock;
|
|
|
- mclk->MpllFuncCntl = mpll_func_cntl;
|
|
|
- mclk->MpllFuncCntl_1 = mpll_func_cntl_1;
|
|
|
- mclk->MpllFuncCntl_2 = mpll_func_cntl_2;
|
|
|
- mclk->MpllAdFuncCntl = mpll_ad_func_cntl;
|
|
|
- mclk->MpllDqFuncCntl = mpll_dq_func_cntl;
|
|
|
- mclk->MclkPwrmgtCntl = mclk_pwrmgt_cntl;
|
|
|
- mclk->DllCntl = dll_cntl;
|
|
|
- mclk->MpllSs1 = mpll_ss1;
|
|
|
- mclk->MpllSs2 = mpll_ss2;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static uint8_t tonga_get_mclk_frequency_ratio(uint32_t memory_clock,
|
|
|
- bool strobe_mode)
|
|
|
-{
|
|
|
- uint8_t mc_para_index;
|
|
|
-
|
|
|
- if (strobe_mode) {
|
|
|
- if (memory_clock < 12500)
|
|
|
- mc_para_index = 0x00;
|
|
|
- else if (memory_clock > 47500)
|
|
|
- mc_para_index = 0x0f;
|
|
|
- else
|
|
|
- mc_para_index = (uint8_t)((memory_clock - 10000) / 2500);
|
|
|
- } else {
|
|
|
- if (memory_clock < 65000)
|
|
|
- mc_para_index = 0x00;
|
|
|
- else if (memory_clock > 135000)
|
|
|
- mc_para_index = 0x0f;
|
|
|
- else
|
|
|
- mc_para_index = (uint8_t)((memory_clock - 60000) / 5000);
|
|
|
- }
|
|
|
-
|
|
|
- return mc_para_index;
|
|
|
-}
|
|
|
-
|
|
|
-static uint8_t tonga_get_ddr3_mclk_frequency_ratio(uint32_t memory_clock)
|
|
|
-{
|
|
|
- uint8_t mc_para_index;
|
|
|
-
|
|
|
- if (memory_clock < 10000)
|
|
|
- mc_para_index = 0;
|
|
|
- else if (memory_clock >= 80000)
|
|
|
- mc_para_index = 0x0f;
|
|
|
- else
|
|
|
- mc_para_index = (uint8_t)((memory_clock - 10000) / 5000 + 1);
|
|
|
-
|
|
|
- return mc_para_index;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static int tonga_populate_single_memory_level(
|
|
|
- struct pp_hwmgr *hwmgr,
|
|
|
- uint32_t memory_clock,
|
|
|
- SMU72_Discrete_MemoryLevel *memory_level
|
|
|
- )
|
|
|
-{
|
|
|
- uint32_t mvdd = 0;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- int result = 0;
|
|
|
- bool dll_state_on;
|
|
|
- struct cgs_display_info info = {0};
|
|
|
- uint32_t mclk_edc_wr_enable_threshold = 40000;
|
|
|
- uint32_t mclk_stutter_mode_threshold = 30000;
|
|
|
- uint32_t mclk_edc_enable_threshold = 40000;
|
|
|
- uint32_t mclk_strobe_mode_threshold = 40000;
|
|
|
-
|
|
|
- if (NULL != pptable_info->vdd_dep_on_mclk) {
|
|
|
- result = tonga_get_dependency_volt_by_clk(hwmgr,
|
|
|
- pptable_info->vdd_dep_on_mclk,
|
|
|
- memory_clock,
|
|
|
- &memory_level->MinVoltage, &mvdd);
|
|
|
- PP_ASSERT_WITH_CODE(
|
|
|
- !result,
|
|
|
- "can not find MinVddc voltage value from memory VDDC "
|
|
|
- "voltage dependency table",
|
|
|
- return result);
|
|
|
- }
|
|
|
-
|
|
|
- if (data->mvdd_control == SMU7_VOLTAGE_CONTROL_NONE)
|
|
|
- memory_level->MinMvdd = data->vbios_boot_state.mvdd_bootup_value;
|
|
|
- else
|
|
|
- memory_level->MinMvdd = mvdd;
|
|
|
-
|
|
|
- memory_level->EnabledForThrottle = 1;
|
|
|
- memory_level->EnabledForActivity = 0;
|
|
|
- memory_level->UpHyst = 0;
|
|
|
- memory_level->DownHyst = 100;
|
|
|
- memory_level->VoltageDownHyst = 0;
|
|
|
-
|
|
|
- /* Indicates maximum activity level for this performance level.*/
|
|
|
- memory_level->ActivityLevel = (uint16_t)data->mclk_activity_target;
|
|
|
- memory_level->StutterEnable = 0;
|
|
|
- memory_level->StrobeEnable = 0;
|
|
|
- memory_level->EdcReadEnable = 0;
|
|
|
- memory_level->EdcWriteEnable = 0;
|
|
|
- memory_level->RttEnable = 0;
|
|
|
-
|
|
|
- /* default set to low watermark. Highest level will be set to high later.*/
|
|
|
- memory_level->DisplayWatermark = PPSMC_DISPLAY_WATERMARK_LOW;
|
|
|
-
|
|
|
- cgs_get_active_displays_info(hwmgr->device, &info);
|
|
|
- data->display_timing.num_existing_displays = info.display_count;
|
|
|
-
|
|
|
- if ((mclk_stutter_mode_threshold != 0) &&
|
|
|
- (memory_clock <= mclk_stutter_mode_threshold) &&
|
|
|
- (!data->is_uvd_enabled)
|
|
|
- && (PHM_READ_FIELD(hwmgr->device, DPG_PIPE_STUTTER_CONTROL, STUTTER_ENABLE) & 0x1)
|
|
|
- && (data->display_timing.num_existing_displays <= 2)
|
|
|
- && (data->display_timing.num_existing_displays != 0))
|
|
|
- memory_level->StutterEnable = 1;
|
|
|
-
|
|
|
- /* decide strobe mode*/
|
|
|
- memory_level->StrobeEnable = (mclk_strobe_mode_threshold != 0) &&
|
|
|
- (memory_clock <= mclk_strobe_mode_threshold);
|
|
|
-
|
|
|
- /* decide EDC mode and memory clock ratio*/
|
|
|
- if (data->is_memory_gddr5) {
|
|
|
- memory_level->StrobeRatio = tonga_get_mclk_frequency_ratio(memory_clock,
|
|
|
- memory_level->StrobeEnable);
|
|
|
-
|
|
|
- if ((mclk_edc_enable_threshold != 0) &&
|
|
|
- (memory_clock > mclk_edc_enable_threshold)) {
|
|
|
- memory_level->EdcReadEnable = 1;
|
|
|
- }
|
|
|
-
|
|
|
- if ((mclk_edc_wr_enable_threshold != 0) &&
|
|
|
- (memory_clock > mclk_edc_wr_enable_threshold)) {
|
|
|
- memory_level->EdcWriteEnable = 1;
|
|
|
- }
|
|
|
-
|
|
|
- if (memory_level->StrobeEnable) {
|
|
|
- if (tonga_get_mclk_frequency_ratio(memory_clock, 1) >=
|
|
|
- ((cgs_read_register(hwmgr->device, mmMC_SEQ_MISC7) >> 16) & 0xf)) {
|
|
|
- dll_state_on = ((cgs_read_register(hwmgr->device, mmMC_SEQ_MISC5) >> 1) & 0x1) ? 1 : 0;
|
|
|
- } else {
|
|
|
- dll_state_on = ((cgs_read_register(hwmgr->device, mmMC_SEQ_MISC6) >> 1) & 0x1) ? 1 : 0;
|
|
|
- }
|
|
|
-
|
|
|
- } else {
|
|
|
- dll_state_on = data->dll_default_on;
|
|
|
- }
|
|
|
- } else {
|
|
|
- memory_level->StrobeRatio =
|
|
|
- tonga_get_ddr3_mclk_frequency_ratio(memory_clock);
|
|
|
- dll_state_on = ((cgs_read_register(hwmgr->device, mmMC_SEQ_MISC5) >> 1) & 0x1) ? 1 : 0;
|
|
|
- }
|
|
|
-
|
|
|
- result = tonga_calculate_mclk_params(hwmgr,
|
|
|
- memory_clock, memory_level, memory_level->StrobeEnable, dll_state_on);
|
|
|
-
|
|
|
- if (!result) {
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MinMvdd);
|
|
|
- /* MCLK frequency in units of 10KHz*/
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MclkFrequency);
|
|
|
- /* Indicates maximum activity level for this performance level.*/
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(memory_level->ActivityLevel);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllFuncCntl);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllFuncCntl_1);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllFuncCntl_2);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllAdFuncCntl);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllDqFuncCntl);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MclkPwrmgtCntl);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->DllCntl);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllSs1);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(memory_level->MpllSs2);
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-int tonga_populate_all_memory_levels(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- struct smu7_dpm_table *dpm_table = &data->dpm_table;
|
|
|
- int result;
|
|
|
-
|
|
|
- /* populate MCLK dpm table to SMU7 */
|
|
|
- uint32_t level_array_address =
|
|
|
- smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable, MemoryLevel);
|
|
|
- uint32_t level_array_size =
|
|
|
- sizeof(SMU72_Discrete_MemoryLevel) *
|
|
|
- SMU72_MAX_LEVELS_MEMORY;
|
|
|
- SMU72_Discrete_MemoryLevel *levels =
|
|
|
- smu_data->smc_state_table.MemoryLevel;
|
|
|
- uint32_t i;
|
|
|
-
|
|
|
- memset(levels, 0x00, level_array_size);
|
|
|
-
|
|
|
- for (i = 0; i < dpm_table->mclk_table.count; i++) {
|
|
|
- PP_ASSERT_WITH_CODE((0 != dpm_table->mclk_table.dpm_levels[i].value),
|
|
|
- "can not populate memory level as memory clock is zero",
|
|
|
- return -EINVAL);
|
|
|
- result = tonga_populate_single_memory_level(
|
|
|
- hwmgr,
|
|
|
- dpm_table->mclk_table.dpm_levels[i].value,
|
|
|
- &(smu_data->smc_state_table.MemoryLevel[i]));
|
|
|
- if (result)
|
|
|
- return result;
|
|
|
- }
|
|
|
-
|
|
|
- /* Only enable level 0 for now.*/
|
|
|
- smu_data->smc_state_table.MemoryLevel[0].EnabledForActivity = 1;
|
|
|
-
|
|
|
- /*
|
|
|
- * in order to prevent MC activity from stutter mode to push DPM up.
|
|
|
- * the UVD change complements this by putting the MCLK in a higher state
|
|
|
- * by default such that we are not effected by up threshold or and MCLK DPM latency.
|
|
|
- */
|
|
|
- smu_data->smc_state_table.MemoryLevel[0].ActivityLevel = 0x1F;
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(smu_data->smc_state_table.MemoryLevel[0].ActivityLevel);
|
|
|
-
|
|
|
- smu_data->smc_state_table.MemoryDpmLevelCount = (uint8_t)dpm_table->mclk_table.count;
|
|
|
- data->dpm_level_enable_mask.mclk_dpm_enable_mask = phm_get_dpm_level_enable_mask_value(&dpm_table->mclk_table);
|
|
|
- /* set highest level watermark to high*/
|
|
|
- smu_data->smc_state_table.MemoryLevel[dpm_table->mclk_table.count-1].DisplayWatermark = PPSMC_DISPLAY_WATERMARK_HIGH;
|
|
|
-
|
|
|
- /* level count will send to smc once at init smc table and never change*/
|
|
|
- result = smu7_copy_bytes_to_smc(hwmgr,
|
|
|
- level_array_address, (uint8_t *)levels, (uint32_t)level_array_size,
|
|
|
- SMC_RAM_END);
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_mvdd_value(struct pp_hwmgr *hwmgr,
|
|
|
- uint32_t mclk, SMIO_Pattern *smio_pattern)
|
|
|
-{
|
|
|
- const struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- uint32_t i = 0;
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_NONE != data->mvdd_control) {
|
|
|
- /* find mvdd value which clock is more than request */
|
|
|
- for (i = 0; i < table_info->vdd_dep_on_mclk->count; i++) {
|
|
|
- if (mclk <= table_info->vdd_dep_on_mclk->entries[i].clk) {
|
|
|
- /* Always round to higher voltage. */
|
|
|
- smio_pattern->Voltage =
|
|
|
- data->mvdd_voltage_table.entries[i].value;
|
|
|
- break;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE(i < table_info->vdd_dep_on_mclk->count,
|
|
|
- "MVDD Voltage is outside the supported range.",
|
|
|
- return -EINVAL);
|
|
|
- } else {
|
|
|
- return -EINVAL;
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static int tonga_populate_smc_acpi_level(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- const struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct pp_atomctrl_clock_dividers_vi dividers;
|
|
|
-
|
|
|
- SMIO_Pattern voltage_level;
|
|
|
- uint32_t spll_func_cntl = data->clock_registers.vCG_SPLL_FUNC_CNTL;
|
|
|
- uint32_t spll_func_cntl_2 = data->clock_registers.vCG_SPLL_FUNC_CNTL_2;
|
|
|
- uint32_t dll_cntl = data->clock_registers.vDLL_CNTL;
|
|
|
- uint32_t mclk_pwrmgt_cntl = data->clock_registers.vMCLK_PWRMGT_CNTL;
|
|
|
-
|
|
|
- /* The ACPI state should not do DPM on DC (or ever).*/
|
|
|
- table->ACPILevel.Flags &= ~PPSMC_SWSTATE_FLAG_DC;
|
|
|
-
|
|
|
- table->ACPILevel.MinVoltage =
|
|
|
- smu_data->smc_state_table.GraphicsLevel[0].MinVoltage;
|
|
|
-
|
|
|
- /* assign zero for now*/
|
|
|
- table->ACPILevel.SclkFrequency = atomctrl_get_reference_clock(hwmgr);
|
|
|
-
|
|
|
- /* get the engine clock dividers for this clock value*/
|
|
|
- result = atomctrl_get_engine_pll_dividers_vi(hwmgr,
|
|
|
- table->ACPILevel.SclkFrequency, ÷rs);
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE(result == 0,
|
|
|
- "Error retrieving Engine Clock dividers from VBIOS.",
|
|
|
- return result);
|
|
|
-
|
|
|
- /* divider ID for required SCLK*/
|
|
|
- table->ACPILevel.SclkDid = (uint8_t)dividers.pll_post_divider;
|
|
|
- table->ACPILevel.DisplayWatermark = PPSMC_DISPLAY_WATERMARK_LOW;
|
|
|
- table->ACPILevel.DeepSleepDivId = 0;
|
|
|
-
|
|
|
- spll_func_cntl = PHM_SET_FIELD(spll_func_cntl, CG_SPLL_FUNC_CNTL,
|
|
|
- SPLL_PWRON, 0);
|
|
|
- spll_func_cntl = PHM_SET_FIELD(spll_func_cntl, CG_SPLL_FUNC_CNTL,
|
|
|
- SPLL_RESET, 1);
|
|
|
- spll_func_cntl_2 = PHM_SET_FIELD(spll_func_cntl_2, CG_SPLL_FUNC_CNTL_2,
|
|
|
- SCLK_MUX_SEL, 4);
|
|
|
-
|
|
|
- table->ACPILevel.CgSpllFuncCntl = spll_func_cntl;
|
|
|
- table->ACPILevel.CgSpllFuncCntl2 = spll_func_cntl_2;
|
|
|
- table->ACPILevel.CgSpllFuncCntl3 = data->clock_registers.vCG_SPLL_FUNC_CNTL_3;
|
|
|
- table->ACPILevel.CgSpllFuncCntl4 = data->clock_registers.vCG_SPLL_FUNC_CNTL_4;
|
|
|
- table->ACPILevel.SpllSpreadSpectrum = data->clock_registers.vCG_SPLL_SPREAD_SPECTRUM;
|
|
|
- table->ACPILevel.SpllSpreadSpectrum2 = data->clock_registers.vCG_SPLL_SPREAD_SPECTRUM_2;
|
|
|
- table->ACPILevel.CcPwrDynRm = 0;
|
|
|
- table->ACPILevel.CcPwrDynRm1 = 0;
|
|
|
-
|
|
|
-
|
|
|
- /* For various features to be enabled/disabled while this level is active.*/
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.Flags);
|
|
|
- /* SCLK frequency in units of 10KHz*/
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.SclkFrequency);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.CgSpllFuncCntl);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.CgSpllFuncCntl2);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.CgSpllFuncCntl3);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.CgSpllFuncCntl4);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.SpllSpreadSpectrum);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.SpllSpreadSpectrum2);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.CcPwrDynRm);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->ACPILevel.CcPwrDynRm1);
|
|
|
-
|
|
|
- /* table->MemoryACPILevel.MinVddcPhases = table->ACPILevel.MinVddcPhases;*/
|
|
|
- table->MemoryACPILevel.MinVoltage =
|
|
|
- smu_data->smc_state_table.MemoryLevel[0].MinVoltage;
|
|
|
-
|
|
|
- /* CONVERT_FROM_HOST_TO_SMC_UL(table->MemoryACPILevel.MinVoltage);*/
|
|
|
-
|
|
|
- if (0 == tonga_populate_mvdd_value(hwmgr, 0, &voltage_level))
|
|
|
- table->MemoryACPILevel.MinMvdd =
|
|
|
- PP_HOST_TO_SMC_UL(voltage_level.Voltage * VOLTAGE_SCALE);
|
|
|
- else
|
|
|
- table->MemoryACPILevel.MinMvdd = 0;
|
|
|
-
|
|
|
- /* Force reset on DLL*/
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, MRDCK0_RESET, 0x1);
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, MRDCK1_RESET, 0x1);
|
|
|
-
|
|
|
- /* Disable DLL in ACPIState*/
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, MRDCK0_PDNB, 0);
|
|
|
- mclk_pwrmgt_cntl = PHM_SET_FIELD(mclk_pwrmgt_cntl,
|
|
|
- MCLK_PWRMGT_CNTL, MRDCK1_PDNB, 0);
|
|
|
-
|
|
|
- /* Enable DLL bypass signal*/
|
|
|
- dll_cntl = PHM_SET_FIELD(dll_cntl,
|
|
|
- DLL_CNTL, MRDCK0_BYPASS, 0);
|
|
|
- dll_cntl = PHM_SET_FIELD(dll_cntl,
|
|
|
- DLL_CNTL, MRDCK1_BYPASS, 0);
|
|
|
-
|
|
|
- table->MemoryACPILevel.DllCntl =
|
|
|
- PP_HOST_TO_SMC_UL(dll_cntl);
|
|
|
- table->MemoryACPILevel.MclkPwrmgtCntl =
|
|
|
- PP_HOST_TO_SMC_UL(mclk_pwrmgt_cntl);
|
|
|
- table->MemoryACPILevel.MpllAdFuncCntl =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_AD_FUNC_CNTL);
|
|
|
- table->MemoryACPILevel.MpllDqFuncCntl =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_DQ_FUNC_CNTL);
|
|
|
- table->MemoryACPILevel.MpllFuncCntl =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_FUNC_CNTL);
|
|
|
- table->MemoryACPILevel.MpllFuncCntl_1 =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_FUNC_CNTL_1);
|
|
|
- table->MemoryACPILevel.MpllFuncCntl_2 =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_FUNC_CNTL_2);
|
|
|
- table->MemoryACPILevel.MpllSs1 =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_SS1);
|
|
|
- table->MemoryACPILevel.MpllSs2 =
|
|
|
- PP_HOST_TO_SMC_UL(data->clock_registers.vMPLL_SS2);
|
|
|
-
|
|
|
- table->MemoryACPILevel.EnabledForThrottle = 0;
|
|
|
- table->MemoryACPILevel.EnabledForActivity = 0;
|
|
|
- table->MemoryACPILevel.UpHyst = 0;
|
|
|
- table->MemoryACPILevel.DownHyst = 100;
|
|
|
- table->MemoryACPILevel.VoltageDownHyst = 0;
|
|
|
- /* Indicates maximum activity level for this performance level.*/
|
|
|
- table->MemoryACPILevel.ActivityLevel =
|
|
|
- PP_HOST_TO_SMC_US((uint16_t)data->mclk_activity_target);
|
|
|
-
|
|
|
- table->MemoryACPILevel.StutterEnable = 0;
|
|
|
- table->MemoryACPILevel.StrobeEnable = 0;
|
|
|
- table->MemoryACPILevel.EdcReadEnable = 0;
|
|
|
- table->MemoryACPILevel.EdcWriteEnable = 0;
|
|
|
- table->MemoryACPILevel.RttEnable = 0;
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_smc_uvd_level(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
-
|
|
|
- uint8_t count;
|
|
|
- pp_atomctrl_clock_dividers_vi dividers;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
|
|
|
- pptable_info->mm_dep_table;
|
|
|
-
|
|
|
- table->UvdLevelCount = (uint8_t) (mm_table->count);
|
|
|
- table->UvdBootLevel = 0;
|
|
|
-
|
|
|
- for (count = 0; count < table->UvdLevelCount; count++) {
|
|
|
- table->UvdLevel[count].VclkFrequency = mm_table->entries[count].vclk;
|
|
|
- table->UvdLevel[count].DclkFrequency = mm_table->entries[count].dclk;
|
|
|
- table->UvdLevel[count].MinVoltage.Vddc =
|
|
|
- phm_get_voltage_index(pptable_info->vddc_lookup_table,
|
|
|
- mm_table->entries[count].vddc);
|
|
|
- table->UvdLevel[count].MinVoltage.VddGfx =
|
|
|
- (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) ?
|
|
|
- phm_get_voltage_index(pptable_info->vddgfx_lookup_table,
|
|
|
- mm_table->entries[count].vddgfx) : 0;
|
|
|
- table->UvdLevel[count].MinVoltage.Vddci =
|
|
|
- phm_get_voltage_id(&data->vddci_voltage_table,
|
|
|
- mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
|
|
|
- table->UvdLevel[count].MinVoltage.Phases = 1;
|
|
|
-
|
|
|
- /* retrieve divider value for VBIOS */
|
|
|
- result = atomctrl_get_dfs_pll_dividers_vi(
|
|
|
- hwmgr,
|
|
|
- table->UvdLevel[count].VclkFrequency,
|
|
|
- ÷rs);
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "can not find divide id for Vclk clock",
|
|
|
- return result);
|
|
|
-
|
|
|
- table->UvdLevel[count].VclkDivider = (uint8_t)dividers.pll_post_divider;
|
|
|
-
|
|
|
- result = atomctrl_get_dfs_pll_dividers_vi(hwmgr,
|
|
|
- table->UvdLevel[count].DclkFrequency, ÷rs);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "can not find divide id for Dclk clock",
|
|
|
- return result);
|
|
|
-
|
|
|
- table->UvdLevel[count].DclkDivider =
|
|
|
- (uint8_t)dividers.pll_post_divider;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].VclkFrequency);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].DclkFrequency);
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_smc_vce_level(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
-
|
|
|
- uint8_t count;
|
|
|
- pp_atomctrl_clock_dividers_vi dividers;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
|
|
|
- pptable_info->mm_dep_table;
|
|
|
-
|
|
|
- table->VceLevelCount = (uint8_t) (mm_table->count);
|
|
|
- table->VceBootLevel = 0;
|
|
|
-
|
|
|
- for (count = 0; count < table->VceLevelCount; count++) {
|
|
|
- table->VceLevel[count].Frequency =
|
|
|
- mm_table->entries[count].eclk;
|
|
|
- table->VceLevel[count].MinVoltage.Vddc =
|
|
|
- phm_get_voltage_index(pptable_info->vddc_lookup_table,
|
|
|
- mm_table->entries[count].vddc);
|
|
|
- table->VceLevel[count].MinVoltage.VddGfx =
|
|
|
- (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) ?
|
|
|
- phm_get_voltage_index(pptable_info->vddgfx_lookup_table,
|
|
|
- mm_table->entries[count].vddgfx) : 0;
|
|
|
- table->VceLevel[count].MinVoltage.Vddci =
|
|
|
- phm_get_voltage_id(&data->vddci_voltage_table,
|
|
|
- mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
|
|
|
- table->VceLevel[count].MinVoltage.Phases = 1;
|
|
|
-
|
|
|
- /* retrieve divider value for VBIOS */
|
|
|
- result = atomctrl_get_dfs_pll_dividers_vi(hwmgr,
|
|
|
- table->VceLevel[count].Frequency, ÷rs);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "can not find divide id for VCE engine clock",
|
|
|
- return result);
|
|
|
-
|
|
|
- table->VceLevel[count].Divider = (uint8_t)dividers.pll_post_divider;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->VceLevel[count].Frequency);
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_smc_acp_level(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
- uint8_t count;
|
|
|
- pp_atomctrl_clock_dividers_vi dividers;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
|
|
|
- pptable_info->mm_dep_table;
|
|
|
-
|
|
|
- table->AcpLevelCount = (uint8_t) (mm_table->count);
|
|
|
- table->AcpBootLevel = 0;
|
|
|
-
|
|
|
- for (count = 0; count < table->AcpLevelCount; count++) {
|
|
|
- table->AcpLevel[count].Frequency =
|
|
|
- pptable_info->mm_dep_table->entries[count].aclk;
|
|
|
- table->AcpLevel[count].MinVoltage.Vddc =
|
|
|
- phm_get_voltage_index(pptable_info->vddc_lookup_table,
|
|
|
- mm_table->entries[count].vddc);
|
|
|
- table->AcpLevel[count].MinVoltage.VddGfx =
|
|
|
- (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) ?
|
|
|
- phm_get_voltage_index(pptable_info->vddgfx_lookup_table,
|
|
|
- mm_table->entries[count].vddgfx) : 0;
|
|
|
- table->AcpLevel[count].MinVoltage.Vddci =
|
|
|
- phm_get_voltage_id(&data->vddci_voltage_table,
|
|
|
- mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
|
|
|
- table->AcpLevel[count].MinVoltage.Phases = 1;
|
|
|
-
|
|
|
- /* retrieve divider value for VBIOS */
|
|
|
- result = atomctrl_get_dfs_pll_dividers_vi(hwmgr,
|
|
|
- table->AcpLevel[count].Frequency, ÷rs);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "can not find divide id for engine clock", return result);
|
|
|
-
|
|
|
- table->AcpLevel[count].Divider = (uint8_t)dividers.pll_post_divider;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->AcpLevel[count].Frequency);
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_smc_samu_level(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
- uint8_t count;
|
|
|
- pp_atomctrl_clock_dividers_vi dividers;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct phm_ppt_v1_information *pptable_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
|
|
|
- pptable_info->mm_dep_table;
|
|
|
-
|
|
|
- table->SamuBootLevel = 0;
|
|
|
- table->SamuLevelCount = (uint8_t) (mm_table->count);
|
|
|
-
|
|
|
- for (count = 0; count < table->SamuLevelCount; count++) {
|
|
|
- /* not sure whether we need evclk or not */
|
|
|
- table->SamuLevel[count].Frequency =
|
|
|
- pptable_info->mm_dep_table->entries[count].samclock;
|
|
|
- table->SamuLevel[count].MinVoltage.Vddc =
|
|
|
- phm_get_voltage_index(pptable_info->vddc_lookup_table,
|
|
|
- mm_table->entries[count].vddc);
|
|
|
- table->SamuLevel[count].MinVoltage.VddGfx =
|
|
|
- (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) ?
|
|
|
- phm_get_voltage_index(pptable_info->vddgfx_lookup_table,
|
|
|
- mm_table->entries[count].vddgfx) : 0;
|
|
|
- table->SamuLevel[count].MinVoltage.Vddci =
|
|
|
- phm_get_voltage_id(&data->vddci_voltage_table,
|
|
|
- mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
|
|
|
- table->SamuLevel[count].MinVoltage.Phases = 1;
|
|
|
-
|
|
|
- /* retrieve divider value for VBIOS */
|
|
|
- result = atomctrl_get_dfs_pll_dividers_vi(hwmgr,
|
|
|
- table->SamuLevel[count].Frequency, ÷rs);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "can not find divide id for samu clock", return result);
|
|
|
-
|
|
|
- table->SamuLevel[count].Divider = (uint8_t)dividers.pll_post_divider;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->SamuLevel[count].Frequency);
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_memory_timing_parameters(
|
|
|
- struct pp_hwmgr *hwmgr,
|
|
|
- uint32_t engine_clock,
|
|
|
- uint32_t memory_clock,
|
|
|
- struct SMU72_Discrete_MCArbDramTimingTableEntry *arb_regs
|
|
|
- )
|
|
|
-{
|
|
|
- uint32_t dramTiming;
|
|
|
- uint32_t dramTiming2;
|
|
|
- uint32_t burstTime;
|
|
|
- int result;
|
|
|
-
|
|
|
- result = atomctrl_set_engine_dram_timings_rv770(hwmgr,
|
|
|
- engine_clock, memory_clock);
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE(result == 0,
|
|
|
- "Error calling VBIOS to set DRAM_TIMING.", return result);
|
|
|
-
|
|
|
- dramTiming = cgs_read_register(hwmgr->device, mmMC_ARB_DRAM_TIMING);
|
|
|
- dramTiming2 = cgs_read_register(hwmgr->device, mmMC_ARB_DRAM_TIMING2);
|
|
|
- burstTime = PHM_READ_FIELD(hwmgr->device, MC_ARB_BURST_TIME, STATE0);
|
|
|
-
|
|
|
- arb_regs->McArbDramTiming = PP_HOST_TO_SMC_UL(dramTiming);
|
|
|
- arb_regs->McArbDramTiming2 = PP_HOST_TO_SMC_UL(dramTiming2);
|
|
|
- arb_regs->McArbBurstTime = (uint8_t)burstTime;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Setup parameters for the MC ARB.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the powerplay hardware manager.
|
|
|
- * @return always 0
|
|
|
- * This function is to be called from the SetPowerState table.
|
|
|
- */
|
|
|
-static int tonga_program_memory_timing_parameters(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- int result = 0;
|
|
|
- SMU72_Discrete_MCArbDramTimingTable arb_regs;
|
|
|
- uint32_t i, j;
|
|
|
-
|
|
|
- memset(&arb_regs, 0x00, sizeof(SMU72_Discrete_MCArbDramTimingTable));
|
|
|
-
|
|
|
- for (i = 0; i < data->dpm_table.sclk_table.count; i++) {
|
|
|
- for (j = 0; j < data->dpm_table.mclk_table.count; j++) {
|
|
|
- result = tonga_populate_memory_timing_parameters
|
|
|
- (hwmgr, data->dpm_table.sclk_table.dpm_levels[i].value,
|
|
|
- data->dpm_table.mclk_table.dpm_levels[j].value,
|
|
|
- &arb_regs.entries[i][j]);
|
|
|
-
|
|
|
- if (result)
|
|
|
- break;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- if (!result) {
|
|
|
- result = smu7_copy_bytes_to_smc(
|
|
|
- hwmgr,
|
|
|
- smu_data->smu7_data.arb_table_start,
|
|
|
- (uint8_t *)&arb_regs,
|
|
|
- sizeof(SMU72_Discrete_MCArbDramTimingTable),
|
|
|
- SMC_RAM_END
|
|
|
- );
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_smc_boot_level(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- table->GraphicsBootLevel = 0;
|
|
|
- table->MemoryBootLevel = 0;
|
|
|
-
|
|
|
- /* find boot level from dpm table*/
|
|
|
- result = phm_find_boot_level(&(data->dpm_table.sclk_table),
|
|
|
- data->vbios_boot_state.sclk_bootup_value,
|
|
|
- (uint32_t *)&(smu_data->smc_state_table.GraphicsBootLevel));
|
|
|
-
|
|
|
- if (result != 0) {
|
|
|
- smu_data->smc_state_table.GraphicsBootLevel = 0;
|
|
|
- pr_err("[powerplay] VBIOS did not find boot engine "
|
|
|
- "clock value in dependency table. "
|
|
|
- "Using Graphics DPM level 0 !");
|
|
|
- result = 0;
|
|
|
- }
|
|
|
-
|
|
|
- result = phm_find_boot_level(&(data->dpm_table.mclk_table),
|
|
|
- data->vbios_boot_state.mclk_bootup_value,
|
|
|
- (uint32_t *)&(smu_data->smc_state_table.MemoryBootLevel));
|
|
|
-
|
|
|
- if (result != 0) {
|
|
|
- smu_data->smc_state_table.MemoryBootLevel = 0;
|
|
|
- pr_err("[powerplay] VBIOS did not find boot "
|
|
|
- "engine clock value in dependency table."
|
|
|
- "Using Memory DPM level 0 !");
|
|
|
- result = 0;
|
|
|
- }
|
|
|
-
|
|
|
- table->BootVoltage.Vddc =
|
|
|
- phm_get_voltage_id(&(data->vddc_voltage_table),
|
|
|
- data->vbios_boot_state.vddc_bootup_value);
|
|
|
- table->BootVoltage.VddGfx =
|
|
|
- phm_get_voltage_id(&(data->vddgfx_voltage_table),
|
|
|
- data->vbios_boot_state.vddgfx_bootup_value);
|
|
|
- table->BootVoltage.Vddci =
|
|
|
- phm_get_voltage_id(&(data->vddci_voltage_table),
|
|
|
- data->vbios_boot_state.vddci_bootup_value);
|
|
|
- table->BootMVdd = data->vbios_boot_state.mvdd_bootup_value;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(table->BootMVdd);
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_clock_stretcher_data_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- uint32_t ro, efuse, efuse2, clock_freq, volt_without_cks,
|
|
|
- volt_with_cks, value;
|
|
|
- uint16_t clock_freq_u16;
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint8_t type, i, j, cks_setting, stretch_amount, stretch_amount2,
|
|
|
- volt_offset = 0;
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table =
|
|
|
- table_info->vdd_dep_on_sclk;
|
|
|
- uint32_t hw_revision, dev_id;
|
|
|
- struct cgs_system_info sys_info = {0};
|
|
|
-
|
|
|
- stretch_amount = (uint8_t)table_info->cac_dtp_table->usClockStretchAmount;
|
|
|
-
|
|
|
- sys_info.size = sizeof(struct cgs_system_info);
|
|
|
-
|
|
|
- sys_info.info_id = CGS_SYSTEM_INFO_PCIE_REV;
|
|
|
- cgs_query_system_info(hwmgr->device, &sys_info);
|
|
|
- hw_revision = (uint32_t)sys_info.value;
|
|
|
-
|
|
|
- sys_info.info_id = CGS_SYSTEM_INFO_PCIE_DEV;
|
|
|
- cgs_query_system_info(hwmgr->device, &sys_info);
|
|
|
- dev_id = (uint32_t)sys_info.value;
|
|
|
-
|
|
|
- /* Read SMU_Eefuse to read and calculate RO and determine
|
|
|
- * if the part is SS or FF. if RO >= 1660MHz, part is FF.
|
|
|
- */
|
|
|
- efuse = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixSMU_EFUSE_0 + (146 * 4));
|
|
|
- efuse2 = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixSMU_EFUSE_0 + (148 * 4));
|
|
|
- efuse &= 0xFF000000;
|
|
|
- efuse = efuse >> 24;
|
|
|
- efuse2 &= 0xF;
|
|
|
-
|
|
|
- if (efuse2 == 1)
|
|
|
- ro = (2300 - 1350) * efuse / 255 + 1350;
|
|
|
- else
|
|
|
- ro = (2500 - 1000) * efuse / 255 + 1000;
|
|
|
-
|
|
|
- if (ro >= 1660)
|
|
|
- type = 0;
|
|
|
- else
|
|
|
- type = 1;
|
|
|
-
|
|
|
- /* Populate Stretch amount */
|
|
|
- smu_data->smc_state_table.ClockStretcherAmount = stretch_amount;
|
|
|
-
|
|
|
-
|
|
|
- /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */
|
|
|
- for (i = 0; i < sclk_table->count; i++) {
|
|
|
- smu_data->smc_state_table.Sclk_CKS_masterEn0_7 |=
|
|
|
- sclk_table->entries[i].cks_enable << i;
|
|
|
- if (ASICID_IS_TONGA_P(dev_id, hw_revision)) {
|
|
|
- volt_without_cks = (uint32_t)((7732 + 60 - ro - 20838 *
|
|
|
- (sclk_table->entries[i].clk/100) / 10000) * 1000 /
|
|
|
- (8730 - (5301 * (sclk_table->entries[i].clk/100) / 1000)));
|
|
|
- volt_with_cks = (uint32_t)((5250 + 51 - ro - 2404 *
|
|
|
- (sclk_table->entries[i].clk/100) / 100000) * 1000 /
|
|
|
- (6146 - (3193 * (sclk_table->entries[i].clk/100) / 1000)));
|
|
|
- } else {
|
|
|
- volt_without_cks = (uint32_t)((14041 *
|
|
|
- (sclk_table->entries[i].clk/100) / 10000 + 3571 + 75 - ro) * 1000 /
|
|
|
- (4026 - (13924 * (sclk_table->entries[i].clk/100) / 10000)));
|
|
|
- volt_with_cks = (uint32_t)((13946 *
|
|
|
- (sclk_table->entries[i].clk/100) / 10000 + 3320 + 45 - ro) * 1000 /
|
|
|
- (3664 - (11454 * (sclk_table->entries[i].clk/100) / 10000)));
|
|
|
- }
|
|
|
- if (volt_without_cks >= volt_with_cks)
|
|
|
- volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks +
|
|
|
- sclk_table->entries[i].cks_voffset) * 100 / 625) + 1);
|
|
|
- smu_data->smc_state_table.Sclk_voltageOffset[i] = volt_offset;
|
|
|
- }
|
|
|
-
|
|
|
- PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE,
|
|
|
- STRETCH_ENABLE, 0x0);
|
|
|
- PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE,
|
|
|
- masterReset, 0x1);
|
|
|
- PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE,
|
|
|
- staticEnable, 0x1);
|
|
|
- PHM_WRITE_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_CKS_ENABLE,
|
|
|
- masterReset, 0x0);
|
|
|
-
|
|
|
- /* Populate CKS Lookup Table */
|
|
|
- if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5)
|
|
|
- stretch_amount2 = 0;
|
|
|
- else if (stretch_amount == 3 || stretch_amount == 4)
|
|
|
- stretch_amount2 = 1;
|
|
|
- else {
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_ClockStretcher);
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Stretch Amount in PPTable not supported\n",
|
|
|
- return -EINVAL);
|
|
|
- }
|
|
|
-
|
|
|
- value = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixPWR_CKS_CNTL);
|
|
|
- value &= 0xFFC2FF87;
|
|
|
- smu_data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].minFreq =
|
|
|
- tonga_clock_stretcher_lookup_table[stretch_amount2][0];
|
|
|
- smu_data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].maxFreq =
|
|
|
- tonga_clock_stretcher_lookup_table[stretch_amount2][1];
|
|
|
- clock_freq_u16 = (uint16_t)(PP_SMC_TO_HOST_UL(smu_data->smc_state_table.
|
|
|
- GraphicsLevel[smu_data->smc_state_table.GraphicsDpmLevelCount - 1].
|
|
|
- SclkFrequency) / 100);
|
|
|
- if (tonga_clock_stretcher_lookup_table[stretch_amount2][0] <
|
|
|
- clock_freq_u16 &&
|
|
|
- tonga_clock_stretcher_lookup_table[stretch_amount2][1] >
|
|
|
- clock_freq_u16) {
|
|
|
- /* Program PWR_CKS_CNTL. CKS_USE_FOR_LOW_FREQ */
|
|
|
- value |= (tonga_clock_stretcher_lookup_table[stretch_amount2][3]) << 16;
|
|
|
- /* Program PWR_CKS_CNTL. CKS_LDO_REFSEL */
|
|
|
- value |= (tonga_clock_stretcher_lookup_table[stretch_amount2][2]) << 18;
|
|
|
- /* Program PWR_CKS_CNTL. CKS_STRETCH_AMOUNT */
|
|
|
- value |= (tonga_clock_stretch_amount_conversion
|
|
|
- [tonga_clock_stretcher_lookup_table[stretch_amount2][3]]
|
|
|
- [stretch_amount]) << 3;
|
|
|
- }
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(smu_data->smc_state_table.CKS_LOOKUPTable.
|
|
|
- CKS_LOOKUPTableEntry[0].minFreq);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(smu_data->smc_state_table.CKS_LOOKUPTable.
|
|
|
- CKS_LOOKUPTableEntry[0].maxFreq);
|
|
|
- smu_data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].setting =
|
|
|
- tonga_clock_stretcher_lookup_table[stretch_amount2][2] & 0x7F;
|
|
|
- smu_data->smc_state_table.CKS_LOOKUPTable.CKS_LOOKUPTableEntry[0].setting |=
|
|
|
- (tonga_clock_stretcher_lookup_table[stretch_amount2][3]) << 7;
|
|
|
-
|
|
|
- cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixPWR_CKS_CNTL, value);
|
|
|
-
|
|
|
- /* Populate DDT Lookup Table */
|
|
|
- for (i = 0; i < 4; i++) {
|
|
|
- /* Assign the minimum and maximum VID stored
|
|
|
- * in the last row of Clock Stretcher Voltage Table.
|
|
|
- */
|
|
|
- smu_data->smc_state_table.ClockStretcherDataTable.
|
|
|
- ClockStretcherDataTableEntry[i].minVID =
|
|
|
- (uint8_t) tonga_clock_stretcher_ddt_table[type][i][2];
|
|
|
- smu_data->smc_state_table.ClockStretcherDataTable.
|
|
|
- ClockStretcherDataTableEntry[i].maxVID =
|
|
|
- (uint8_t) tonga_clock_stretcher_ddt_table[type][i][3];
|
|
|
- /* Loop through each SCLK and check the frequency
|
|
|
- * to see if it lies within the frequency for clock stretcher.
|
|
|
- */
|
|
|
- for (j = 0; j < smu_data->smc_state_table.GraphicsDpmLevelCount; j++) {
|
|
|
- cks_setting = 0;
|
|
|
- clock_freq = PP_SMC_TO_HOST_UL(
|
|
|
- smu_data->smc_state_table.GraphicsLevel[j].SclkFrequency);
|
|
|
- /* Check the allowed frequency against the sclk level[j].
|
|
|
- * Sclk's endianness has already been converted,
|
|
|
- * and it's in 10Khz unit,
|
|
|
- * as opposed to Data table, which is in Mhz unit.
|
|
|
- */
|
|
|
- if (clock_freq >= tonga_clock_stretcher_ddt_table[type][i][0] * 100) {
|
|
|
- cks_setting |= 0x2;
|
|
|
- if (clock_freq < tonga_clock_stretcher_ddt_table[type][i][1] * 100)
|
|
|
- cks_setting |= 0x1;
|
|
|
- }
|
|
|
- smu_data->smc_state_table.ClockStretcherDataTable.
|
|
|
- ClockStretcherDataTableEntry[i].setting |= cks_setting << (j * 2);
|
|
|
- }
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(smu_data->smc_state_table.
|
|
|
- ClockStretcherDataTable.
|
|
|
- ClockStretcherDataTableEntry[i].setting);
|
|
|
- }
|
|
|
-
|
|
|
- value = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixPWR_CKS_CNTL);
|
|
|
- value &= 0xFFFFFFFE;
|
|
|
- cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixPWR_CKS_CNTL, value);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Populates the SMC VRConfig field in DPM table.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the hardware manager
|
|
|
- * @param table the SMC DPM table structure to be populated
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-static int tonga_populate_vr_config(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_DpmTable *table)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- uint16_t config;
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->vdd_gfx_control) {
|
|
|
- /* Splitted mode */
|
|
|
- config = VR_SVI2_PLANE_1;
|
|
|
- table->VRConfig |= (config<<VRCONF_VDDGFX_SHIFT);
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->voltage_control) {
|
|
|
- config = VR_SVI2_PLANE_2;
|
|
|
- table->VRConfig |= config;
|
|
|
- } else {
|
|
|
- pr_err("VDDC and VDDGFX should "
|
|
|
- "be both on SVI2 control in splitted mode !\n");
|
|
|
- }
|
|
|
- } else {
|
|
|
- /* Merged mode */
|
|
|
- config = VR_MERGED_WITH_VDDC;
|
|
|
- table->VRConfig |= (config<<VRCONF_VDDGFX_SHIFT);
|
|
|
-
|
|
|
- /* Set Vddc Voltage Controller */
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->voltage_control) {
|
|
|
- config = VR_SVI2_PLANE_1;
|
|
|
- table->VRConfig |= config;
|
|
|
- } else {
|
|
|
- pr_err("VDDC should be on "
|
|
|
- "SVI2 control in merged mode !\n");
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- /* Set Vddci Voltage Controller */
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control) {
|
|
|
- config = VR_SVI2_PLANE_2; /* only in merged mode */
|
|
|
- table->VRConfig |= (config<<VRCONF_VDDCI_SHIFT);
|
|
|
- } else if (SMU7_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control) {
|
|
|
- config = VR_SMIO_PATTERN_1;
|
|
|
- table->VRConfig |= (config<<VRCONF_VDDCI_SHIFT);
|
|
|
- }
|
|
|
-
|
|
|
- /* Set Mvdd Voltage Controller */
|
|
|
- if (SMU7_VOLTAGE_CONTROL_BY_GPIO == data->mvdd_control) {
|
|
|
- config = VR_SMIO_PATTERN_2;
|
|
|
- table->VRConfig |= (config<<VRCONF_MVDD_SHIFT);
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/**
|
|
|
- * Initialize the ARB DRAM timing table's index field.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the powerplay hardware manager.
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-static int tonga_init_arb_table_index(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t tmp;
|
|
|
- int result;
|
|
|
-
|
|
|
- /*
|
|
|
- * This is a read-modify-write on the first byte of the ARB table.
|
|
|
- * The first byte in the SMU72_Discrete_MCArbDramTimingTable structure
|
|
|
- * is the field 'current'.
|
|
|
- * This solution is ugly, but we never write the whole table only
|
|
|
- * individual fields in it.
|
|
|
- * In reality this field should not be in that structure
|
|
|
- * but in a soft register.
|
|
|
- */
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- smu_data->smu7_data.arb_table_start, &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (result != 0)
|
|
|
- return result;
|
|
|
-
|
|
|
- tmp &= 0x00FFFFFF;
|
|
|
- tmp |= ((uint32_t)MC_CG_ARB_FREQ_F1) << 24;
|
|
|
-
|
|
|
- return smu7_write_smc_sram_dword(hwmgr,
|
|
|
- smu_data->smu7_data.arb_table_start, tmp, SMC_RAM_END);
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static int tonga_populate_bapm_parameters_in_dpm_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- const struct tonga_pt_defaults *defaults = smu_data->power_tune_defaults;
|
|
|
- SMU72_Discrete_DpmTable *dpm_table = &(smu_data->smc_state_table);
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- struct phm_cac_tdp_table *cac_dtp_table = table_info->cac_dtp_table;
|
|
|
- int i, j, k;
|
|
|
- const uint16_t *pdef1, *pdef2;
|
|
|
-
|
|
|
- dpm_table->DefaultTdp = PP_HOST_TO_SMC_US(
|
|
|
- (uint16_t)(cac_dtp_table->usTDP * 256));
|
|
|
- dpm_table->TargetTdp = PP_HOST_TO_SMC_US(
|
|
|
- (uint16_t)(cac_dtp_table->usConfigurableTDP * 256));
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE(cac_dtp_table->usTargetOperatingTemp <= 255,
|
|
|
- "Target Operating Temp is out of Range !",
|
|
|
- );
|
|
|
-
|
|
|
- dpm_table->GpuTjMax = (uint8_t)(cac_dtp_table->usTargetOperatingTemp);
|
|
|
- dpm_table->GpuTjHyst = 8;
|
|
|
-
|
|
|
- dpm_table->DTEAmbientTempBase = defaults->dte_ambient_temp_base;
|
|
|
-
|
|
|
- dpm_table->BAPM_TEMP_GRADIENT =
|
|
|
- PP_HOST_TO_SMC_UL(defaults->bapm_temp_gradient);
|
|
|
- pdef1 = defaults->bapmti_r;
|
|
|
- pdef2 = defaults->bapmti_rc;
|
|
|
-
|
|
|
- for (i = 0; i < SMU72_DTE_ITERATIONS; i++) {
|
|
|
- for (j = 0; j < SMU72_DTE_SOURCES; j++) {
|
|
|
- for (k = 0; k < SMU72_DTE_SINKS; k++) {
|
|
|
- dpm_table->BAPMTI_R[i][j][k] =
|
|
|
- PP_HOST_TO_SMC_US(*pdef1);
|
|
|
- dpm_table->BAPMTI_RC[i][j][k] =
|
|
|
- PP_HOST_TO_SMC_US(*pdef2);
|
|
|
- pdef1++;
|
|
|
- pdef2++;
|
|
|
- }
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_svi_load_line(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- const struct tonga_pt_defaults *defaults = smu_data->power_tune_defaults;
|
|
|
-
|
|
|
- smu_data->power_tune_table.SviLoadLineEn = defaults->svi_load_line_en;
|
|
|
- smu_data->power_tune_table.SviLoadLineVddC = defaults->svi_load_line_vddC;
|
|
|
- smu_data->power_tune_table.SviLoadLineTrimVddC = 3;
|
|
|
- smu_data->power_tune_table.SviLoadLineOffsetVddC = 0;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_tdc_limit(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- uint16_t tdc_limit;
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- const struct tonga_pt_defaults *defaults = smu_data->power_tune_defaults;
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- /* TDC number of fraction bits are changed from 8 to 7
|
|
|
- * for Fiji as requested by SMC team
|
|
|
- */
|
|
|
- tdc_limit = (uint16_t)(table_info->cac_dtp_table->usTDC * 256);
|
|
|
- smu_data->power_tune_table.TDC_VDDC_PkgLimit =
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(tdc_limit);
|
|
|
- smu_data->power_tune_table.TDC_VDDC_ThrottleReleaseLimitPerc =
|
|
|
- defaults->tdc_vddc_throttle_release_limit_perc;
|
|
|
- smu_data->power_tune_table.TDC_MAWt = defaults->tdc_mawt;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_dw8(struct pp_hwmgr *hwmgr, uint32_t fuse_table_offset)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- const struct tonga_pt_defaults *defaults = smu_data->power_tune_defaults;
|
|
|
- uint32_t temp;
|
|
|
-
|
|
|
- if (smu7_read_smc_sram_dword(hwmgr,
|
|
|
- fuse_table_offset +
|
|
|
- offsetof(SMU72_Discrete_PmFuses, TdcWaterfallCtl),
|
|
|
- (uint32_t *)&temp, SMC_RAM_END))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to read PmFuses.DW6 "
|
|
|
- "(SviLoadLineEn) from SMC Failed !",
|
|
|
- return -EINVAL);
|
|
|
- else
|
|
|
- smu_data->power_tune_table.TdcWaterfallCtl = defaults->tdc_waterfall_ctl;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_temperature_scaler(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- int i;
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
-
|
|
|
- /* Currently not used. Set all to zero. */
|
|
|
- for (i = 0; i < 16; i++)
|
|
|
- smu_data->power_tune_table.LPMLTemperatureScaler[i] = 0;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_fuzzy_fan(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
-
|
|
|
- if ((hwmgr->thermal_controller.advanceFanControlParameters.
|
|
|
- usFanOutputSensitivity & (1 << 15)) ||
|
|
|
- (hwmgr->thermal_controller.advanceFanControlParameters.usFanOutputSensitivity == 0))
|
|
|
- hwmgr->thermal_controller.advanceFanControlParameters.
|
|
|
- usFanOutputSensitivity = hwmgr->thermal_controller.
|
|
|
- advanceFanControlParameters.usDefaultFanOutputSensitivity;
|
|
|
-
|
|
|
- smu_data->power_tune_table.FuzzyFan_PwmSetDelta =
|
|
|
- PP_HOST_TO_SMC_US(hwmgr->thermal_controller.
|
|
|
- advanceFanControlParameters.usFanOutputSensitivity);
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_gnb_lpml(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- int i;
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
-
|
|
|
- /* Currently not used. Set all to zero. */
|
|
|
- for (i = 0; i < 16; i++)
|
|
|
- smu_data->power_tune_table.GnbLPML[i] = 0;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_bapm_vddc_base_leakage_sidd(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
- uint16_t hi_sidd = smu_data->power_tune_table.BapmVddCBaseLeakageHiSidd;
|
|
|
- uint16_t lo_sidd = smu_data->power_tune_table.BapmVddCBaseLeakageLoSidd;
|
|
|
- struct phm_cac_tdp_table *cac_table = table_info->cac_dtp_table;
|
|
|
-
|
|
|
- hi_sidd = (uint16_t)(cac_table->usHighCACLeakage / 100 * 256);
|
|
|
- lo_sidd = (uint16_t)(cac_table->usLowCACLeakage / 100 * 256);
|
|
|
-
|
|
|
- smu_data->power_tune_table.BapmVddCBaseLeakageHiSidd =
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(hi_sidd);
|
|
|
- smu_data->power_tune_table.BapmVddCBaseLeakageLoSidd =
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(lo_sidd);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_pm_fuses(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t pm_fuse_table_offset;
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_PowerContainment)) {
|
|
|
- if (smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, PmFuseTable),
|
|
|
- &pm_fuse_table_offset, SMC_RAM_END))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to get pm_fuse_table_offset Failed !",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- /* DW6 */
|
|
|
- if (tonga_populate_svi_load_line(hwmgr))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to populate SviLoadLine Failed !",
|
|
|
- return -EINVAL);
|
|
|
- /* DW7 */
|
|
|
- if (tonga_populate_tdc_limit(hwmgr))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to populate TDCLimit Failed !",
|
|
|
- return -EINVAL);
|
|
|
- /* DW8 */
|
|
|
- if (tonga_populate_dw8(hwmgr, pm_fuse_table_offset))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to populate TdcWaterfallCtl Failed !",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- /* DW9-DW12 */
|
|
|
- if (tonga_populate_temperature_scaler(hwmgr) != 0)
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to populate LPMLTemperatureScaler Failed !",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- /* DW13-DW14 */
|
|
|
- if (tonga_populate_fuzzy_fan(hwmgr))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to populate Fuzzy Fan "
|
|
|
- "Control parameters Failed !",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- /* DW15-DW18 */
|
|
|
- if (tonga_populate_gnb_lpml(hwmgr))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to populate GnbLPML Failed !",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- /* DW20 */
|
|
|
- if (tonga_populate_bapm_vddc_base_leakage_sidd(hwmgr))
|
|
|
- PP_ASSERT_WITH_CODE(
|
|
|
- false,
|
|
|
- "Attempt to populate BapmVddCBaseLeakage "
|
|
|
- "Hi and Lo Sidd Failed !",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- if (smu7_copy_bytes_to_smc(hwmgr, pm_fuse_table_offset,
|
|
|
- (uint8_t *)&smu_data->power_tune_table,
|
|
|
- sizeof(struct SMU72_Discrete_PmFuses), SMC_RAM_END))
|
|
|
- PP_ASSERT_WITH_CODE(false,
|
|
|
- "Attempt to download PmFuseTable Failed !",
|
|
|
- return -EINVAL);
|
|
|
- }
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_mc_reg_address(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_MCRegisters *mc_reg_table)
|
|
|
-{
|
|
|
- const struct tonga_smumgr *smu_data = (struct tonga_smumgr *)hwmgr->smu_backend;
|
|
|
-
|
|
|
- uint32_t i, j;
|
|
|
-
|
|
|
- for (i = 0, j = 0; j < smu_data->mc_reg_table.last; j++) {
|
|
|
- if (smu_data->mc_reg_table.validflag & 1<<j) {
|
|
|
- PP_ASSERT_WITH_CODE(
|
|
|
- i < SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE,
|
|
|
- "Index of mc_reg_table->address[] array "
|
|
|
- "out of boundary",
|
|
|
- return -EINVAL);
|
|
|
- mc_reg_table->address[i].s0 =
|
|
|
- PP_HOST_TO_SMC_US(smu_data->mc_reg_table.mc_reg_address[j].s0);
|
|
|
- mc_reg_table->address[i].s1 =
|
|
|
- PP_HOST_TO_SMC_US(smu_data->mc_reg_table.mc_reg_address[j].s1);
|
|
|
- i++;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- mc_reg_table->last = (uint8_t)i;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/*convert register values from driver to SMC format */
|
|
|
-static void tonga_convert_mc_registers(
|
|
|
- const struct tonga_mc_reg_entry *entry,
|
|
|
- SMU72_Discrete_MCRegisterSet *data,
|
|
|
- uint32_t num_entries, uint32_t valid_flag)
|
|
|
-{
|
|
|
- uint32_t i, j;
|
|
|
-
|
|
|
- for (i = 0, j = 0; j < num_entries; j++) {
|
|
|
- if (valid_flag & 1<<j) {
|
|
|
- data->value[i] = PP_HOST_TO_SMC_UL(entry->mc_data[j]);
|
|
|
- i++;
|
|
|
- }
|
|
|
- }
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_convert_mc_reg_table_entry_to_smc(
|
|
|
- struct pp_hwmgr *hwmgr,
|
|
|
- const uint32_t memory_clock,
|
|
|
- SMU72_Discrete_MCRegisterSet *mc_reg_table_data
|
|
|
- )
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t i = 0;
|
|
|
-
|
|
|
- for (i = 0; i < smu_data->mc_reg_table.num_entries; i++) {
|
|
|
- if (memory_clock <=
|
|
|
- smu_data->mc_reg_table.mc_reg_table_entry[i].mclk_max) {
|
|
|
- break;
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- if ((i == smu_data->mc_reg_table.num_entries) && (i > 0))
|
|
|
- --i;
|
|
|
-
|
|
|
- tonga_convert_mc_registers(&smu_data->mc_reg_table.mc_reg_table_entry[i],
|
|
|
- mc_reg_table_data, smu_data->mc_reg_table.last,
|
|
|
- smu_data->mc_reg_table.validflag);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_convert_mc_reg_table_to_smc(struct pp_hwmgr *hwmgr,
|
|
|
- SMU72_Discrete_MCRegisters *mc_regs)
|
|
|
-{
|
|
|
- int result = 0;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- int res;
|
|
|
- uint32_t i;
|
|
|
-
|
|
|
- for (i = 0; i < data->dpm_table.mclk_table.count; i++) {
|
|
|
- res = tonga_convert_mc_reg_table_entry_to_smc(
|
|
|
- hwmgr,
|
|
|
- data->dpm_table.mclk_table.dpm_levels[i].value,
|
|
|
- &mc_regs->data[i]
|
|
|
- );
|
|
|
-
|
|
|
- if (0 != res)
|
|
|
- result = res;
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_update_and_upload_mc_reg_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- uint32_t address;
|
|
|
- int32_t result;
|
|
|
-
|
|
|
- if (0 == (data->need_update_smu7_dpm_table & DPMTABLE_OD_UPDATE_MCLK))
|
|
|
- return 0;
|
|
|
-
|
|
|
-
|
|
|
- memset(&smu_data->mc_regs, 0, sizeof(SMU72_Discrete_MCRegisters));
|
|
|
-
|
|
|
- result = tonga_convert_mc_reg_table_to_smc(hwmgr, &(smu_data->mc_regs));
|
|
|
-
|
|
|
- if (result != 0)
|
|
|
- return result;
|
|
|
-
|
|
|
-
|
|
|
- address = smu_data->smu7_data.mc_reg_table_start +
|
|
|
- (uint32_t)offsetof(SMU72_Discrete_MCRegisters, data[0]);
|
|
|
-
|
|
|
- return smu7_copy_bytes_to_smc(
|
|
|
- hwmgr, address,
|
|
|
- (uint8_t *)&smu_data->mc_regs.data[0],
|
|
|
- sizeof(SMU72_Discrete_MCRegisterSet) *
|
|
|
- data->dpm_table.mclk_table.count,
|
|
|
- SMC_RAM_END);
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_populate_initial_mc_reg_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- int result;
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
-
|
|
|
- memset(&smu_data->mc_regs, 0x00, sizeof(SMU72_Discrete_MCRegisters));
|
|
|
- result = tonga_populate_mc_reg_address(hwmgr, &(smu_data->mc_regs));
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize MCRegTable for the MC register addresses !",
|
|
|
- return result;);
|
|
|
-
|
|
|
- result = tonga_convert_mc_reg_table_to_smc(hwmgr, &smu_data->mc_regs);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize MCRegTable for driver state !",
|
|
|
- return result;);
|
|
|
-
|
|
|
- return smu7_copy_bytes_to_smc(hwmgr, smu_data->smu7_data.mc_reg_table_start,
|
|
|
- (uint8_t *)&smu_data->mc_regs, sizeof(SMU72_Discrete_MCRegisters), SMC_RAM_END);
|
|
|
-}
|
|
|
-
|
|
|
-static void tonga_initialize_power_tune_defaults(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- if (table_info &&
|
|
|
- table_info->cac_dtp_table->usPowerTuneDataSetID <= POWERTUNE_DEFAULT_SET_MAX &&
|
|
|
- table_info->cac_dtp_table->usPowerTuneDataSetID)
|
|
|
- smu_data->power_tune_defaults =
|
|
|
- &tonga_power_tune_data_set_array
|
|
|
- [table_info->cac_dtp_table->usPowerTuneDataSetID - 1];
|
|
|
- else
|
|
|
- smu_data->power_tune_defaults = &tonga_power_tune_data_set_array[0];
|
|
|
-}
|
|
|
-
|
|
|
-static void tonga_save_default_power_profile(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- struct SMU72_Discrete_GraphicsLevel *levels =
|
|
|
- data->smc_state_table.GraphicsLevel;
|
|
|
- unsigned min_level = 1;
|
|
|
-
|
|
|
- hwmgr->default_gfx_power_profile.activity_threshold =
|
|
|
- be16_to_cpu(levels[0].ActivityLevel);
|
|
|
- hwmgr->default_gfx_power_profile.up_hyst = levels[0].UpHyst;
|
|
|
- hwmgr->default_gfx_power_profile.down_hyst = levels[0].DownHyst;
|
|
|
- hwmgr->default_gfx_power_profile.type = AMD_PP_GFX_PROFILE;
|
|
|
-
|
|
|
- hwmgr->default_compute_power_profile = hwmgr->default_gfx_power_profile;
|
|
|
- hwmgr->default_compute_power_profile.type = AMD_PP_COMPUTE_PROFILE;
|
|
|
-
|
|
|
- /* Workaround compute SDMA instability: disable lowest SCLK
|
|
|
- * DPM level. Optimize compute power profile: Use only highest
|
|
|
- * 2 power levels (if more than 2 are available), Hysteresis:
|
|
|
- * 0ms up, 5ms down
|
|
|
- */
|
|
|
- if (data->smc_state_table.GraphicsDpmLevelCount > 2)
|
|
|
- min_level = data->smc_state_table.GraphicsDpmLevelCount - 2;
|
|
|
- else if (data->smc_state_table.GraphicsDpmLevelCount == 2)
|
|
|
- min_level = 1;
|
|
|
- else
|
|
|
- min_level = 0;
|
|
|
- hwmgr->default_compute_power_profile.min_sclk =
|
|
|
- be32_to_cpu(levels[min_level].SclkFrequency);
|
|
|
- hwmgr->default_compute_power_profile.up_hyst = 0;
|
|
|
- hwmgr->default_compute_power_profile.down_hyst = 5;
|
|
|
-
|
|
|
- hwmgr->gfx_power_profile = hwmgr->default_gfx_power_profile;
|
|
|
- hwmgr->compute_power_profile = hwmgr->default_compute_power_profile;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * Initializes the SMC table and uploads it
|
|
|
- *
|
|
|
- * @param hwmgr the address of the powerplay hardware manager.
|
|
|
- * @param pInput the pointer to input data (PowerState)
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-int tonga_init_smc_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- int result;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- SMU72_Discrete_DpmTable *table = &(smu_data->smc_state_table);
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- uint8_t i;
|
|
|
- pp_atomctrl_gpio_pin_assignment gpio_pin_assignment;
|
|
|
-
|
|
|
-
|
|
|
- memset(&(smu_data->smc_state_table), 0x00, sizeof(smu_data->smc_state_table));
|
|
|
-
|
|
|
- tonga_initialize_power_tune_defaults(hwmgr);
|
|
|
-
|
|
|
- if (SMU7_VOLTAGE_CONTROL_NONE != data->voltage_control)
|
|
|
- tonga_populate_smc_voltage_tables(hwmgr, table);
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_AutomaticDCTransition))
|
|
|
- table->SystemFlags |= PPSMC_SYSTEMFLAG_GPIO_DC;
|
|
|
-
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_StepVddc))
|
|
|
- table->SystemFlags |= PPSMC_SYSTEMFLAG_STEPVDDC;
|
|
|
-
|
|
|
- if (data->is_memory_gddr5)
|
|
|
- table->SystemFlags |= PPSMC_SYSTEMFLAG_GDDR5;
|
|
|
-
|
|
|
- i = PHM_READ_FIELD(hwmgr->device, CC_MC_MAX_CHANNEL, NOOFCHAN);
|
|
|
-
|
|
|
- if (i == 1 || i == 0)
|
|
|
- table->SystemFlags |= 0x40;
|
|
|
-
|
|
|
- if (data->ulv_supported && table_info->us_ulv_voltage_offset) {
|
|
|
- result = tonga_populate_ulv_state(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize ULV state !",
|
|
|
- return result;);
|
|
|
-
|
|
|
- cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC,
|
|
|
- ixCG_ULV_PARAMETER, 0x40035);
|
|
|
- }
|
|
|
-
|
|
|
- result = tonga_populate_smc_link_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize Link Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_all_graphic_levels(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize Graphics Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_all_memory_levels(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize Memory Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_smc_acpi_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize ACPI Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_smc_vce_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize VCE Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_smc_acp_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize ACP Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_smc_samu_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize SAMU Level !", return result);
|
|
|
-
|
|
|
- /* Since only the initial state is completely set up at this
|
|
|
- * point (the other states are just copies of the boot state) we only
|
|
|
- * need to populate the ARB settings for the initial state.
|
|
|
- */
|
|
|
- result = tonga_program_memory_timing_parameters(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to Write ARB settings for the initial state.",
|
|
|
- return result;);
|
|
|
-
|
|
|
- result = tonga_populate_smc_uvd_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize UVD Level !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_smc_boot_level(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to initialize Boot Level !", return result);
|
|
|
-
|
|
|
- tonga_populate_bapm_parameters_in_dpm_table(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to populate BAPM Parameters !", return result);
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_ClockStretcher)) {
|
|
|
- result = tonga_populate_clock_stretcher_data_table(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to populate Clock Stretcher Data Table !",
|
|
|
- return result;);
|
|
|
- }
|
|
|
- table->GraphicsVoltageChangeEnable = 1;
|
|
|
- table->GraphicsThermThrottleEnable = 1;
|
|
|
- table->GraphicsInterval = 1;
|
|
|
- table->VoltageInterval = 1;
|
|
|
- table->ThermalInterval = 1;
|
|
|
- table->TemperatureLimitHigh =
|
|
|
- table_info->cac_dtp_table->usTargetOperatingTemp *
|
|
|
- SMU7_Q88_FORMAT_CONVERSION_UNIT;
|
|
|
- table->TemperatureLimitLow =
|
|
|
- (table_info->cac_dtp_table->usTargetOperatingTemp - 1) *
|
|
|
- SMU7_Q88_FORMAT_CONVERSION_UNIT;
|
|
|
- table->MemoryVoltageChangeEnable = 1;
|
|
|
- table->MemoryInterval = 1;
|
|
|
- table->VoltageResponseTime = 0;
|
|
|
- table->PhaseResponseTime = 0;
|
|
|
- table->MemoryThermThrottleEnable = 1;
|
|
|
-
|
|
|
- /*
|
|
|
- * Cail reads current link status and reports it as cap (we cannot
|
|
|
- * change this due to some previous issues we had)
|
|
|
- * SMC drops the link status to lowest level after enabling
|
|
|
- * DPM by PowerPlay. After pnp or toggling CF, driver gets reloaded again
|
|
|
- * but this time Cail reads current link status which was set to low by
|
|
|
- * SMC and reports it as cap to powerplay
|
|
|
- * To avoid it, we set PCIeBootLinkLevel to highest dpm level
|
|
|
- */
|
|
|
- PP_ASSERT_WITH_CODE((1 <= data->dpm_table.pcie_speed_table.count),
|
|
|
- "There must be 1 or more PCIE levels defined in PPTable.",
|
|
|
- return -EINVAL);
|
|
|
-
|
|
|
- table->PCIeBootLinkLevel = (uint8_t) (data->dpm_table.pcie_speed_table.count);
|
|
|
-
|
|
|
- table->PCIeGenInterval = 1;
|
|
|
-
|
|
|
- result = tonga_populate_vr_config(hwmgr, table);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to populate VRConfig setting !", return result);
|
|
|
-
|
|
|
- table->ThermGpio = 17;
|
|
|
- table->SclkStepSize = 0x4000;
|
|
|
-
|
|
|
- if (atomctrl_get_pp_assign_pin(hwmgr, VDDC_VRHOT_GPIO_PINID,
|
|
|
- &gpio_pin_assignment)) {
|
|
|
- table->VRHotGpio = gpio_pin_assignment.uc_gpio_pin_bit_shift;
|
|
|
- phm_cap_set(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_RegulatorHot);
|
|
|
- } else {
|
|
|
- table->VRHotGpio = SMU7_UNUSED_GPIO_PIN;
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_RegulatorHot);
|
|
|
- }
|
|
|
-
|
|
|
- if (atomctrl_get_pp_assign_pin(hwmgr, PP_AC_DC_SWITCH_GPIO_PINID,
|
|
|
- &gpio_pin_assignment)) {
|
|
|
- table->AcDcGpio = gpio_pin_assignment.uc_gpio_pin_bit_shift;
|
|
|
- phm_cap_set(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_AutomaticDCTransition);
|
|
|
- } else {
|
|
|
- table->AcDcGpio = SMU7_UNUSED_GPIO_PIN;
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_AutomaticDCTransition);
|
|
|
- }
|
|
|
-
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_Falcon_QuickTransition);
|
|
|
-
|
|
|
- if (0) {
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_AutomaticDCTransition);
|
|
|
- phm_cap_set(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_Falcon_QuickTransition);
|
|
|
- }
|
|
|
-
|
|
|
- if (atomctrl_get_pp_assign_pin(hwmgr,
|
|
|
- THERMAL_INT_OUTPUT_GPIO_PINID, &gpio_pin_assignment)) {
|
|
|
- phm_cap_set(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_ThermalOutGPIO);
|
|
|
-
|
|
|
- table->ThermOutGpio = gpio_pin_assignment.uc_gpio_pin_bit_shift;
|
|
|
-
|
|
|
- table->ThermOutPolarity =
|
|
|
- (0 == (cgs_read_register(hwmgr->device, mmGPIOPAD_A) &
|
|
|
- (1 << gpio_pin_assignment.uc_gpio_pin_bit_shift))) ? 1 : 0;
|
|
|
-
|
|
|
- table->ThermOutMode = SMU7_THERM_OUT_MODE_THERM_ONLY;
|
|
|
-
|
|
|
- /* if required, combine VRHot/PCC with thermal out GPIO*/
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_RegulatorHot) &&
|
|
|
- phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_CombinePCCWithThermalSignal)){
|
|
|
- table->ThermOutMode = SMU7_THERM_OUT_MODE_THERM_VRHOT;
|
|
|
- }
|
|
|
- } else {
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_ThermalOutGPIO);
|
|
|
-
|
|
|
- table->ThermOutGpio = 17;
|
|
|
- table->ThermOutPolarity = 1;
|
|
|
- table->ThermOutMode = SMU7_THERM_OUT_MODE_DISABLE;
|
|
|
- }
|
|
|
-
|
|
|
- for (i = 0; i < SMU72_MAX_ENTRIES_SMIO; i++)
|
|
|
- table->Smio[i] = PP_HOST_TO_SMC_UL(table->Smio[i]);
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->SystemFlags);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->VRConfig);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->SmioMask1);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->SmioMask2);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(table->SclkStepSize);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(table->TemperatureLimitHigh);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(table->TemperatureLimitLow);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(table->VoltageResponseTime);
|
|
|
- CONVERT_FROM_HOST_TO_SMC_US(table->PhaseResponseTime);
|
|
|
-
|
|
|
- /* Upload all dpm data to SMC memory.(dpm level, dpm level count etc) */
|
|
|
- result = smu7_copy_bytes_to_smc(
|
|
|
- hwmgr,
|
|
|
- smu_data->smu7_data.dpm_table_start + offsetof(SMU72_Discrete_DpmTable, SystemFlags),
|
|
|
- (uint8_t *)&(table->SystemFlags),
|
|
|
- sizeof(SMU72_Discrete_DpmTable) - 3 * sizeof(SMU72_PIDController),
|
|
|
- SMC_RAM_END);
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to upload dpm data to SMC memory !", return result;);
|
|
|
-
|
|
|
- result = tonga_init_arb_table_index(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE(!result,
|
|
|
- "Failed to upload arb data to SMC memory !", return result);
|
|
|
-
|
|
|
- tonga_populate_pm_fuses(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "Failed to populate initialize pm fuses !", return result);
|
|
|
-
|
|
|
- result = tonga_populate_initial_mc_reg_table(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "Failed to populate initialize MC Reg table !", return result);
|
|
|
-
|
|
|
- tonga_save_default_power_profile(hwmgr);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
-* Set up the fan table to control the fan using the SMC.
|
|
|
-* @param hwmgr the address of the powerplay hardware manager.
|
|
|
-* @param pInput the pointer to input data
|
|
|
-* @param pOutput the pointer to output data
|
|
|
-* @param pStorage the pointer to temporary storage
|
|
|
-* @param Result the last failure code
|
|
|
-* @return result from set temperature range routine
|
|
|
-*/
|
|
|
-int tonga_thermal_setup_fan_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- SMU72_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE };
|
|
|
- uint32_t duty100;
|
|
|
- uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2;
|
|
|
- uint16_t fdo_min, slope1, slope2;
|
|
|
- uint32_t reference_clock;
|
|
|
- int res;
|
|
|
- uint64_t tmp64;
|
|
|
-
|
|
|
- if (!phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_MicrocodeFanControl))
|
|
|
- return 0;
|
|
|
-
|
|
|
- if (hwmgr->thermal_controller.fanInfo.bNoFan) {
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_MicrocodeFanControl);
|
|
|
- return 0;
|
|
|
- }
|
|
|
-
|
|
|
- if (0 == smu_data->smu7_data.fan_table_start) {
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_MicrocodeFanControl);
|
|
|
- return 0;
|
|
|
- }
|
|
|
-
|
|
|
- duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC,
|
|
|
- CG_FDO_CTRL1, FMAX_DUTY100);
|
|
|
-
|
|
|
- if (0 == duty100) {
|
|
|
- phm_cap_unset(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_MicrocodeFanControl);
|
|
|
- return 0;
|
|
|
- }
|
|
|
-
|
|
|
- tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin * duty100;
|
|
|
- do_div(tmp64, 10000);
|
|
|
- fdo_min = (uint16_t)tmp64;
|
|
|
-
|
|
|
- t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed -
|
|
|
- hwmgr->thermal_controller.advanceFanControlParameters.usTMin;
|
|
|
- t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh -
|
|
|
- hwmgr->thermal_controller.advanceFanControlParameters.usTMed;
|
|
|
-
|
|
|
- pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed -
|
|
|
- hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin;
|
|
|
- pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh -
|
|
|
- hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed;
|
|
|
-
|
|
|
- slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100);
|
|
|
- slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100);
|
|
|
-
|
|
|
- fan_table.TempMin = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMin) / 100);
|
|
|
- fan_table.TempMed = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMed) / 100);
|
|
|
- fan_table.TempMax = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMax) / 100);
|
|
|
-
|
|
|
- fan_table.Slope1 = cpu_to_be16(slope1);
|
|
|
- fan_table.Slope2 = cpu_to_be16(slope2);
|
|
|
-
|
|
|
- fan_table.FdoMin = cpu_to_be16(fdo_min);
|
|
|
-
|
|
|
- fan_table.HystDown = cpu_to_be16(hwmgr->thermal_controller.advanceFanControlParameters.ucTHyst);
|
|
|
-
|
|
|
- fan_table.HystUp = cpu_to_be16(1);
|
|
|
-
|
|
|
- fan_table.HystSlope = cpu_to_be16(1);
|
|
|
-
|
|
|
- fan_table.TempRespLim = cpu_to_be16(5);
|
|
|
-
|
|
|
- reference_clock = smu7_get_xclk(hwmgr);
|
|
|
-
|
|
|
- fan_table.RefreshPeriod = cpu_to_be32((hwmgr->thermal_controller.advanceFanControlParameters.ulCycleDelay * reference_clock) / 1600);
|
|
|
-
|
|
|
- fan_table.FdoMax = cpu_to_be16((uint16_t)duty100);
|
|
|
-
|
|
|
- fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_CTRL, TEMP_SEL);
|
|
|
-
|
|
|
- fan_table.FanControl_GL_Flag = 1;
|
|
|
-
|
|
|
- res = smu7_copy_bytes_to_smc(hwmgr,
|
|
|
- smu_data->smu7_data.fan_table_start,
|
|
|
- (uint8_t *)&fan_table,
|
|
|
- (uint32_t)sizeof(fan_table),
|
|
|
- SMC_RAM_END);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static int tonga_program_mem_timing_parameters(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
-
|
|
|
- if (data->need_update_smu7_dpm_table &
|
|
|
- (DPMTABLE_OD_UPDATE_SCLK + DPMTABLE_OD_UPDATE_MCLK))
|
|
|
- return tonga_program_memory_timing_parameters(hwmgr);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int tonga_update_sclk_threshold(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
-
|
|
|
- int result = 0;
|
|
|
- uint32_t low_sclk_interrupt_threshold = 0;
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_SclkThrottleLowNotification)
|
|
|
- && (hwmgr->gfx_arbiter.sclk_threshold !=
|
|
|
- data->low_sclk_interrupt_threshold)) {
|
|
|
- data->low_sclk_interrupt_threshold =
|
|
|
- hwmgr->gfx_arbiter.sclk_threshold;
|
|
|
- low_sclk_interrupt_threshold =
|
|
|
- data->low_sclk_interrupt_threshold;
|
|
|
-
|
|
|
- CONVERT_FROM_HOST_TO_SMC_UL(low_sclk_interrupt_threshold);
|
|
|
-
|
|
|
- result = smu7_copy_bytes_to_smc(
|
|
|
- hwmgr,
|
|
|
- smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable,
|
|
|
- LowSclkInterruptThreshold),
|
|
|
- (uint8_t *)&low_sclk_interrupt_threshold,
|
|
|
- sizeof(uint32_t),
|
|
|
- SMC_RAM_END);
|
|
|
- }
|
|
|
-
|
|
|
- result = tonga_update_and_upload_mc_reg_table(hwmgr);
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE((!result),
|
|
|
- "Failed to upload MC reg table !",
|
|
|
- return result);
|
|
|
-
|
|
|
- result = tonga_program_mem_timing_parameters(hwmgr);
|
|
|
- PP_ASSERT_WITH_CODE((result == 0),
|
|
|
- "Failed to program memory timing parameters !",
|
|
|
- );
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-uint32_t tonga_get_offsetof(uint32_t type, uint32_t member)
|
|
|
-{
|
|
|
- switch (type) {
|
|
|
- case SMU_SoftRegisters:
|
|
|
- switch (member) {
|
|
|
- case HandshakeDisables:
|
|
|
- return offsetof(SMU72_SoftRegisters, HandshakeDisables);
|
|
|
- case VoltageChangeTimeout:
|
|
|
- return offsetof(SMU72_SoftRegisters, VoltageChangeTimeout);
|
|
|
- case AverageGraphicsActivity:
|
|
|
- return offsetof(SMU72_SoftRegisters, AverageGraphicsActivity);
|
|
|
- case PreVBlankGap:
|
|
|
- return offsetof(SMU72_SoftRegisters, PreVBlankGap);
|
|
|
- case VBlankTimeout:
|
|
|
- return offsetof(SMU72_SoftRegisters, VBlankTimeout);
|
|
|
- case UcodeLoadStatus:
|
|
|
- return offsetof(SMU72_SoftRegisters, UcodeLoadStatus);
|
|
|
- case DRAM_LOG_ADDR_H:
|
|
|
- return offsetof(SMU72_SoftRegisters, DRAM_LOG_ADDR_H);
|
|
|
- case DRAM_LOG_ADDR_L:
|
|
|
- return offsetof(SMU72_SoftRegisters, DRAM_LOG_ADDR_L);
|
|
|
- case DRAM_LOG_PHY_ADDR_H:
|
|
|
- return offsetof(SMU72_SoftRegisters, DRAM_LOG_PHY_ADDR_H);
|
|
|
- case DRAM_LOG_PHY_ADDR_L:
|
|
|
- return offsetof(SMU72_SoftRegisters, DRAM_LOG_PHY_ADDR_L);
|
|
|
- case DRAM_LOG_BUFF_SIZE:
|
|
|
- return offsetof(SMU72_SoftRegisters, DRAM_LOG_BUFF_SIZE);
|
|
|
- }
|
|
|
- case SMU_Discrete_DpmTable:
|
|
|
- switch (member) {
|
|
|
- case UvdBootLevel:
|
|
|
- return offsetof(SMU72_Discrete_DpmTable, UvdBootLevel);
|
|
|
- case VceBootLevel:
|
|
|
- return offsetof(SMU72_Discrete_DpmTable, VceBootLevel);
|
|
|
- case SamuBootLevel:
|
|
|
- return offsetof(SMU72_Discrete_DpmTable, SamuBootLevel);
|
|
|
- case LowSclkInterruptThreshold:
|
|
|
- return offsetof(SMU72_Discrete_DpmTable, LowSclkInterruptThreshold);
|
|
|
- }
|
|
|
- }
|
|
|
- pr_warn("can't get the offset of type %x member %x\n", type, member);
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-uint32_t tonga_get_mac_definition(uint32_t value)
|
|
|
-{
|
|
|
- switch (value) {
|
|
|
- case SMU_MAX_LEVELS_GRAPHICS:
|
|
|
- return SMU72_MAX_LEVELS_GRAPHICS;
|
|
|
- case SMU_MAX_LEVELS_MEMORY:
|
|
|
- return SMU72_MAX_LEVELS_MEMORY;
|
|
|
- case SMU_MAX_LEVELS_LINK:
|
|
|
- return SMU72_MAX_LEVELS_LINK;
|
|
|
- case SMU_MAX_ENTRIES_SMIO:
|
|
|
- return SMU72_MAX_ENTRIES_SMIO;
|
|
|
- case SMU_MAX_LEVELS_VDDC:
|
|
|
- return SMU72_MAX_LEVELS_VDDC;
|
|
|
- case SMU_MAX_LEVELS_VDDGFX:
|
|
|
- return SMU72_MAX_LEVELS_VDDGFX;
|
|
|
- case SMU_MAX_LEVELS_VDDCI:
|
|
|
- return SMU72_MAX_LEVELS_VDDCI;
|
|
|
- case SMU_MAX_LEVELS_MVDD:
|
|
|
- return SMU72_MAX_LEVELS_MVDD;
|
|
|
- }
|
|
|
- pr_warn("can't get the mac value %x\n", value);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-static int tonga_update_uvd_smc_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t mm_boot_level_offset, mm_boot_level_value;
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
- smu_data->smc_state_table.UvdBootLevel = 0;
|
|
|
- if (table_info->mm_dep_table->count > 0)
|
|
|
- smu_data->smc_state_table.UvdBootLevel =
|
|
|
- (uint8_t) (table_info->mm_dep_table->count - 1);
|
|
|
- mm_boot_level_offset = smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable, UvdBootLevel);
|
|
|
- mm_boot_level_offset /= 4;
|
|
|
- mm_boot_level_offset *= 4;
|
|
|
- mm_boot_level_value = cgs_read_ind_register(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC, mm_boot_level_offset);
|
|
|
- mm_boot_level_value &= 0x00FFFFFF;
|
|
|
- mm_boot_level_value |= smu_data->smc_state_table.UvdBootLevel << 24;
|
|
|
- cgs_write_ind_register(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC,
|
|
|
- mm_boot_level_offset, mm_boot_level_value);
|
|
|
-
|
|
|
- if (!phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_UVDDPM) ||
|
|
|
- phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_StablePState))
|
|
|
- smum_send_msg_to_smc_with_parameter(hwmgr,
|
|
|
- PPSMC_MSG_UVDDPM_SetEnabledMask,
|
|
|
- (uint32_t)(1 << smu_data->smc_state_table.UvdBootLevel));
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_update_vce_smc_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data =
|
|
|
- (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t mm_boot_level_offset, mm_boot_level_value;
|
|
|
- struct phm_ppt_v1_information *table_info =
|
|
|
- (struct phm_ppt_v1_information *)(hwmgr->pptable);
|
|
|
-
|
|
|
-
|
|
|
- smu_data->smc_state_table.VceBootLevel =
|
|
|
- (uint8_t) (table_info->mm_dep_table->count - 1);
|
|
|
-
|
|
|
- mm_boot_level_offset = smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable, VceBootLevel);
|
|
|
- mm_boot_level_offset /= 4;
|
|
|
- mm_boot_level_offset *= 4;
|
|
|
- mm_boot_level_value = cgs_read_ind_register(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC, mm_boot_level_offset);
|
|
|
- mm_boot_level_value &= 0xFF00FFFF;
|
|
|
- mm_boot_level_value |= smu_data->smc_state_table.VceBootLevel << 16;
|
|
|
- cgs_write_ind_register(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC, mm_boot_level_offset, mm_boot_level_value);
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_StablePState))
|
|
|
- smum_send_msg_to_smc_with_parameter(hwmgr,
|
|
|
- PPSMC_MSG_VCEDPM_SetEnabledMask,
|
|
|
- (uint32_t)1 << smu_data->smc_state_table.VceBootLevel);
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_update_samu_smc_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- uint32_t mm_boot_level_offset, mm_boot_level_value;
|
|
|
-
|
|
|
- smu_data->smc_state_table.SamuBootLevel = 0;
|
|
|
- mm_boot_level_offset = smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable, SamuBootLevel);
|
|
|
-
|
|
|
- mm_boot_level_offset /= 4;
|
|
|
- mm_boot_level_offset *= 4;
|
|
|
- mm_boot_level_value = cgs_read_ind_register(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC, mm_boot_level_offset);
|
|
|
- mm_boot_level_value &= 0xFFFFFF00;
|
|
|
- mm_boot_level_value |= smu_data->smc_state_table.SamuBootLevel << 0;
|
|
|
- cgs_write_ind_register(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC, mm_boot_level_offset, mm_boot_level_value);
|
|
|
-
|
|
|
- if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps,
|
|
|
- PHM_PlatformCaps_StablePState))
|
|
|
- smum_send_msg_to_smc_with_parameter(hwmgr,
|
|
|
- PPSMC_MSG_SAMUDPM_SetEnabledMask,
|
|
|
- (uint32_t)(1 << smu_data->smc_state_table.SamuBootLevel));
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int tonga_update_smc_table(struct pp_hwmgr *hwmgr, uint32_t type)
|
|
|
-{
|
|
|
- switch (type) {
|
|
|
- case SMU_UVD_TABLE:
|
|
|
- tonga_update_uvd_smc_table(hwmgr);
|
|
|
- break;
|
|
|
- case SMU_VCE_TABLE:
|
|
|
- tonga_update_vce_smc_table(hwmgr);
|
|
|
- break;
|
|
|
- case SMU_SAMU_TABLE:
|
|
|
- tonga_update_samu_smc_table(hwmgr);
|
|
|
- break;
|
|
|
- default:
|
|
|
- break;
|
|
|
- }
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-/**
|
|
|
- * Get the location of various tables inside the FW image.
|
|
|
- *
|
|
|
- * @param hwmgr the address of the powerplay hardware manager.
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-int tonga_process_firmware_header(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
-
|
|
|
- uint32_t tmp;
|
|
|
- int result;
|
|
|
- bool error = false;
|
|
|
-
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, DpmTable),
|
|
|
- &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (!result)
|
|
|
- smu_data->smu7_data.dpm_table_start = tmp;
|
|
|
-
|
|
|
- error |= (result != 0);
|
|
|
-
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, SoftRegisters),
|
|
|
- &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (!result) {
|
|
|
- data->soft_regs_start = tmp;
|
|
|
- smu_data->smu7_data.soft_regs_start = tmp;
|
|
|
- }
|
|
|
-
|
|
|
- error |= (result != 0);
|
|
|
-
|
|
|
-
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, mcRegisterTable),
|
|
|
- &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (!result)
|
|
|
- smu_data->smu7_data.mc_reg_table_start = tmp;
|
|
|
-
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, FanTable),
|
|
|
- &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (!result)
|
|
|
- smu_data->smu7_data.fan_table_start = tmp;
|
|
|
-
|
|
|
- error |= (result != 0);
|
|
|
-
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, mcArbDramTimingTable),
|
|
|
- &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (!result)
|
|
|
- smu_data->smu7_data.arb_table_start = tmp;
|
|
|
-
|
|
|
- error |= (result != 0);
|
|
|
-
|
|
|
- result = smu7_read_smc_sram_dword(hwmgr,
|
|
|
- SMU72_FIRMWARE_HEADER_LOCATION +
|
|
|
- offsetof(SMU72_Firmware_Header, Version),
|
|
|
- &tmp, SMC_RAM_END);
|
|
|
-
|
|
|
- if (!result)
|
|
|
- hwmgr->microcode_version_info.SMC = tmp;
|
|
|
-
|
|
|
- error |= (result != 0);
|
|
|
-
|
|
|
- return error ? 1 : 0;
|
|
|
-}
|
|
|
-
|
|
|
-/*---------------------------MC----------------------------*/
|
|
|
-
|
|
|
-static uint8_t tonga_get_memory_modile_index(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- return (uint8_t) (0xFF & (cgs_read_register(hwmgr->device, mmBIOS_SCRATCH_4) >> 16));
|
|
|
-}
|
|
|
-
|
|
|
-static bool tonga_check_s0_mc_reg_index(uint16_t in_reg, uint16_t *out_reg)
|
|
|
-{
|
|
|
- bool result = true;
|
|
|
-
|
|
|
- switch (in_reg) {
|
|
|
- case mmMC_SEQ_RAS_TIMING:
|
|
|
- *out_reg = mmMC_SEQ_RAS_TIMING_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_DLL_STBY:
|
|
|
- *out_reg = mmMC_SEQ_DLL_STBY_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_G5PDX_CMD0:
|
|
|
- *out_reg = mmMC_SEQ_G5PDX_CMD0_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_G5PDX_CMD1:
|
|
|
- *out_reg = mmMC_SEQ_G5PDX_CMD1_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_G5PDX_CTRL:
|
|
|
- *out_reg = mmMC_SEQ_G5PDX_CTRL_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_CAS_TIMING:
|
|
|
- *out_reg = mmMC_SEQ_CAS_TIMING_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_MISC_TIMING:
|
|
|
- *out_reg = mmMC_SEQ_MISC_TIMING_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_MISC_TIMING2:
|
|
|
- *out_reg = mmMC_SEQ_MISC_TIMING2_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_PMG_DVS_CMD:
|
|
|
- *out_reg = mmMC_SEQ_PMG_DVS_CMD_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_PMG_DVS_CTL:
|
|
|
- *out_reg = mmMC_SEQ_PMG_DVS_CTL_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_RD_CTL_D0:
|
|
|
- *out_reg = mmMC_SEQ_RD_CTL_D0_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_RD_CTL_D1:
|
|
|
- *out_reg = mmMC_SEQ_RD_CTL_D1_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_WR_CTL_D0:
|
|
|
- *out_reg = mmMC_SEQ_WR_CTL_D0_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_WR_CTL_D1:
|
|
|
- *out_reg = mmMC_SEQ_WR_CTL_D1_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_PMG_CMD_EMRS:
|
|
|
- *out_reg = mmMC_SEQ_PMG_CMD_EMRS_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_PMG_CMD_MRS:
|
|
|
- *out_reg = mmMC_SEQ_PMG_CMD_MRS_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_PMG_CMD_MRS1:
|
|
|
- *out_reg = mmMC_SEQ_PMG_CMD_MRS1_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_PMG_TIMING:
|
|
|
- *out_reg = mmMC_SEQ_PMG_TIMING_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_PMG_CMD_MRS2:
|
|
|
- *out_reg = mmMC_SEQ_PMG_CMD_MRS2_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_WR_CTL_2:
|
|
|
- *out_reg = mmMC_SEQ_WR_CTL_2_LP;
|
|
|
- break;
|
|
|
-
|
|
|
- default:
|
|
|
- result = false;
|
|
|
- break;
|
|
|
- }
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_set_s0_mc_reg_index(struct tonga_mc_reg_table *table)
|
|
|
-{
|
|
|
- uint32_t i;
|
|
|
- uint16_t address;
|
|
|
-
|
|
|
- for (i = 0; i < table->last; i++) {
|
|
|
- table->mc_reg_address[i].s0 =
|
|
|
- tonga_check_s0_mc_reg_index(table->mc_reg_address[i].s1,
|
|
|
- &address) ?
|
|
|
- address :
|
|
|
- table->mc_reg_address[i].s1;
|
|
|
- }
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_copy_vbios_smc_reg_table(const pp_atomctrl_mc_reg_table *table,
|
|
|
- struct tonga_mc_reg_table *ni_table)
|
|
|
-{
|
|
|
- uint8_t i, j;
|
|
|
-
|
|
|
- PP_ASSERT_WITH_CODE((table->last <= SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
- PP_ASSERT_WITH_CODE((table->num_entries <= MAX_AC_TIMING_ENTRIES),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
-
|
|
|
- for (i = 0; i < table->last; i++)
|
|
|
- ni_table->mc_reg_address[i].s1 = table->mc_reg_address[i].s1;
|
|
|
-
|
|
|
- ni_table->last = table->last;
|
|
|
-
|
|
|
- for (i = 0; i < table->num_entries; i++) {
|
|
|
- ni_table->mc_reg_table_entry[i].mclk_max =
|
|
|
- table->mc_reg_table_entry[i].mclk_max;
|
|
|
- for (j = 0; j < table->last; j++) {
|
|
|
- ni_table->mc_reg_table_entry[i].mc_data[j] =
|
|
|
- table->mc_reg_table_entry[i].mc_data[j];
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- ni_table->num_entries = table->num_entries;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/**
|
|
|
- * VBIOS omits some information to reduce size, we need to recover them here.
|
|
|
- * 1. when we see mmMC_SEQ_MISC1, bit[31:16] EMRS1, need to be write to
|
|
|
- * mmMC_PMG_CMD_EMRS /_LP[15:0]. Bit[15:0] MRS, need to be update
|
|
|
- * mmMC_PMG_CMD_MRS/_LP[15:0]
|
|
|
- * 2. when we see mmMC_SEQ_RESERVE_M, bit[15:0] EMRS2, need to be write to
|
|
|
- * mmMC_PMG_CMD_MRS1/_LP[15:0].
|
|
|
- * 3. need to set these data for each clock range
|
|
|
- * @param hwmgr the address of the powerplay hardware manager.
|
|
|
- * @param table the address of MCRegTable
|
|
|
- * @return always 0
|
|
|
- */
|
|
|
-static int tonga_set_mc_special_registers(struct pp_hwmgr *hwmgr,
|
|
|
- struct tonga_mc_reg_table *table)
|
|
|
-{
|
|
|
- uint8_t i, j, k;
|
|
|
- uint32_t temp_reg;
|
|
|
- struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
|
|
|
-
|
|
|
- for (i = 0, j = table->last; i < table->last; i++) {
|
|
|
- PP_ASSERT_WITH_CODE((j < SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
-
|
|
|
- switch (table->mc_reg_address[i].s1) {
|
|
|
-
|
|
|
- case mmMC_SEQ_MISC1:
|
|
|
- temp_reg = cgs_read_register(hwmgr->device,
|
|
|
- mmMC_PMG_CMD_EMRS);
|
|
|
- table->mc_reg_address[j].s1 = mmMC_PMG_CMD_EMRS;
|
|
|
- table->mc_reg_address[j].s0 = mmMC_SEQ_PMG_CMD_EMRS_LP;
|
|
|
- for (k = 0; k < table->num_entries; k++) {
|
|
|
- table->mc_reg_table_entry[k].mc_data[j] =
|
|
|
- ((temp_reg & 0xffff0000)) |
|
|
|
- ((table->mc_reg_table_entry[k].mc_data[i] & 0xffff0000) >> 16);
|
|
|
- }
|
|
|
- j++;
|
|
|
- PP_ASSERT_WITH_CODE((j < SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
-
|
|
|
- temp_reg = cgs_read_register(hwmgr->device, mmMC_PMG_CMD_MRS);
|
|
|
- table->mc_reg_address[j].s1 = mmMC_PMG_CMD_MRS;
|
|
|
- table->mc_reg_address[j].s0 = mmMC_SEQ_PMG_CMD_MRS_LP;
|
|
|
- for (k = 0; k < table->num_entries; k++) {
|
|
|
- table->mc_reg_table_entry[k].mc_data[j] =
|
|
|
- (temp_reg & 0xffff0000) |
|
|
|
- (table->mc_reg_table_entry[k].mc_data[i] & 0x0000ffff);
|
|
|
-
|
|
|
- if (!data->is_memory_gddr5)
|
|
|
- table->mc_reg_table_entry[k].mc_data[j] |= 0x100;
|
|
|
- }
|
|
|
- j++;
|
|
|
- PP_ASSERT_WITH_CODE((j <= SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
-
|
|
|
- if (!data->is_memory_gddr5) {
|
|
|
- table->mc_reg_address[j].s1 = mmMC_PMG_AUTO_CMD;
|
|
|
- table->mc_reg_address[j].s0 = mmMC_PMG_AUTO_CMD;
|
|
|
- for (k = 0; k < table->num_entries; k++)
|
|
|
- table->mc_reg_table_entry[k].mc_data[j] =
|
|
|
- (table->mc_reg_table_entry[k].mc_data[i] & 0xffff0000) >> 16;
|
|
|
- j++;
|
|
|
- PP_ASSERT_WITH_CODE((j <= SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
- }
|
|
|
-
|
|
|
- break;
|
|
|
-
|
|
|
- case mmMC_SEQ_RESERVE_M:
|
|
|
- temp_reg = cgs_read_register(hwmgr->device, mmMC_PMG_CMD_MRS1);
|
|
|
- table->mc_reg_address[j].s1 = mmMC_PMG_CMD_MRS1;
|
|
|
- table->mc_reg_address[j].s0 = mmMC_SEQ_PMG_CMD_MRS1_LP;
|
|
|
- for (k = 0; k < table->num_entries; k++) {
|
|
|
- table->mc_reg_table_entry[k].mc_data[j] =
|
|
|
- (temp_reg & 0xffff0000) |
|
|
|
- (table->mc_reg_table_entry[k].mc_data[i] & 0x0000ffff);
|
|
|
- }
|
|
|
- j++;
|
|
|
- PP_ASSERT_WITH_CODE((j <= SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE),
|
|
|
- "Invalid VramInfo table.", return -EINVAL);
|
|
|
- break;
|
|
|
-
|
|
|
- default:
|
|
|
- break;
|
|
|
- }
|
|
|
-
|
|
|
- }
|
|
|
-
|
|
|
- table->last = j;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-static int tonga_set_valid_flag(struct tonga_mc_reg_table *table)
|
|
|
-{
|
|
|
- uint8_t i, j;
|
|
|
-
|
|
|
- for (i = 0; i < table->last; i++) {
|
|
|
- for (j = 1; j < table->num_entries; j++) {
|
|
|
- if (table->mc_reg_table_entry[j-1].mc_data[i] !=
|
|
|
- table->mc_reg_table_entry[j].mc_data[i]) {
|
|
|
- table->validflag |= (1<<i);
|
|
|
- break;
|
|
|
- }
|
|
|
- }
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int tonga_initialize_mc_reg_table(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- int result;
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)(hwmgr->smu_backend);
|
|
|
- pp_atomctrl_mc_reg_table *table;
|
|
|
- struct tonga_mc_reg_table *ni_table = &smu_data->mc_reg_table;
|
|
|
- uint8_t module_index = tonga_get_memory_modile_index(hwmgr);
|
|
|
-
|
|
|
- table = kzalloc(sizeof(pp_atomctrl_mc_reg_table), GFP_KERNEL);
|
|
|
-
|
|
|
- if (table == NULL)
|
|
|
- return -ENOMEM;
|
|
|
-
|
|
|
- /* Program additional LP registers that are no longer programmed by VBIOS */
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_RAS_TIMING_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_RAS_TIMING));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_CAS_TIMING_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_CAS_TIMING));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_DLL_STBY_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_DLL_STBY));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_G5PDX_CMD0_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_G5PDX_CMD0));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_G5PDX_CMD1_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_G5PDX_CMD1));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_G5PDX_CTRL_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_G5PDX_CTRL));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_DVS_CMD_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_PMG_DVS_CMD));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_DVS_CTL_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_PMG_DVS_CTL));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_MISC_TIMING_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_MISC_TIMING));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_MISC_TIMING2_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_MISC_TIMING2));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_CMD_EMRS_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_PMG_CMD_EMRS));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_CMD_MRS_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_PMG_CMD_MRS));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_CMD_MRS1_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_PMG_CMD_MRS1));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_WR_CTL_D0_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_WR_CTL_D0));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_WR_CTL_D1_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_WR_CTL_D1));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_RD_CTL_D0_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_RD_CTL_D0));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_RD_CTL_D1_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_RD_CTL_D1));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_TIMING_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_PMG_TIMING));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_PMG_CMD_MRS2_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_PMG_CMD_MRS2));
|
|
|
- cgs_write_register(hwmgr->device, mmMC_SEQ_WR_CTL_2_LP,
|
|
|
- cgs_read_register(hwmgr->device, mmMC_SEQ_WR_CTL_2));
|
|
|
-
|
|
|
- memset(table, 0x00, sizeof(pp_atomctrl_mc_reg_table));
|
|
|
-
|
|
|
- result = atomctrl_initialize_mc_reg_table(hwmgr, module_index, table);
|
|
|
-
|
|
|
- if (!result)
|
|
|
- result = tonga_copy_vbios_smc_reg_table(table, ni_table);
|
|
|
-
|
|
|
- if (!result) {
|
|
|
- tonga_set_s0_mc_reg_index(ni_table);
|
|
|
- result = tonga_set_mc_special_registers(hwmgr, ni_table);
|
|
|
- }
|
|
|
-
|
|
|
- if (!result)
|
|
|
- tonga_set_valid_flag(ni_table);
|
|
|
-
|
|
|
- kfree(table);
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-bool tonga_is_dpm_running(struct pp_hwmgr *hwmgr)
|
|
|
-{
|
|
|
- return (1 == PHM_READ_INDIRECT_FIELD(hwmgr->device,
|
|
|
- CGS_IND_REG__SMC, FEATURE_STATUS, VOLTAGE_CONTROLLER_ON))
|
|
|
- ? true : false;
|
|
|
-}
|
|
|
-
|
|
|
-int tonga_populate_requested_graphic_levels(struct pp_hwmgr *hwmgr,
|
|
|
- struct amd_pp_profile *request)
|
|
|
-{
|
|
|
- struct tonga_smumgr *smu_data = (struct tonga_smumgr *)
|
|
|
- (hwmgr->smu_backend);
|
|
|
- struct SMU72_Discrete_GraphicsLevel *levels =
|
|
|
- smu_data->smc_state_table.GraphicsLevel;
|
|
|
- uint32_t array = smu_data->smu7_data.dpm_table_start +
|
|
|
- offsetof(SMU72_Discrete_DpmTable, GraphicsLevel);
|
|
|
- uint32_t array_size = sizeof(struct SMU72_Discrete_GraphicsLevel) *
|
|
|
- SMU72_MAX_LEVELS_GRAPHICS;
|
|
|
- uint32_t i;
|
|
|
-
|
|
|
- for (i = 0; i < smu_data->smc_state_table.GraphicsDpmLevelCount; i++) {
|
|
|
- levels[i].ActivityLevel =
|
|
|
- cpu_to_be16(request->activity_threshold);
|
|
|
- levels[i].EnabledForActivity = 1;
|
|
|
- levels[i].UpHyst = request->up_hyst;
|
|
|
- levels[i].DownHyst = request->down_hyst;
|
|
|
- }
|
|
|
-
|
|
|
- return smu7_copy_bytes_to_smc(hwmgr, array, (uint8_t *)levels,
|
|
|
- array_size, SMC_RAM_END);
|
|
|
-}
|