浏览代码

media: ov5645: Supported external clock is 24MHz

The external clock frequency was set to 23.88MHz by mistake
because of a platform which cannot get closer to 24MHz.
The supported by the driver external clock is 24MHz so
set it correctly and also fix the values of the pixel
clock and link clock.
However allow 1% tolerance to the external clock as this
difference is small enough to be insignificant.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Todor Tomov 7 年之前
父节点
当前提交
4adb0a0432
共有 1 个文件被更改,包括 7 次插入6 次删除
  1. 7 6
      drivers/media/i2c/ov5645.c

+ 7 - 6
drivers/media/i2c/ov5645.c

@@ -510,8 +510,8 @@ static const struct reg_value ov5645_setting_full[] = {
 };
 
 static const s64 link_freq[] = {
-	222880000,
-	334320000
+	224000000,
+	336000000
 };
 
 static const struct ov5645_mode_info ov5645_mode_info_data[] = {
@@ -520,7 +520,7 @@ static const struct ov5645_mode_info ov5645_mode_info_data[] = {
 		.height = 960,
 		.data = ov5645_setting_sxga,
 		.data_size = ARRAY_SIZE(ov5645_setting_sxga),
-		.pixel_clock = 111440000,
+		.pixel_clock = 112000000,
 		.link_freq = 0 /* an index in link_freq[] */
 	},
 	{
@@ -528,7 +528,7 @@ static const struct ov5645_mode_info ov5645_mode_info_data[] = {
 		.height = 1080,
 		.data = ov5645_setting_1080p,
 		.data_size = ARRAY_SIZE(ov5645_setting_1080p),
-		.pixel_clock = 167160000,
+		.pixel_clock = 168000000,
 		.link_freq = 1 /* an index in link_freq[] */
 	},
 	{
@@ -536,7 +536,7 @@ static const struct ov5645_mode_info ov5645_mode_info_data[] = {
 		.height = 1944,
 		.data = ov5645_setting_full,
 		.data_size = ARRAY_SIZE(ov5645_setting_full),
-		.pixel_clock = 167160000,
+		.pixel_clock = 168000000,
 		.link_freq = 1 /* an index in link_freq[] */
 	},
 };
@@ -1145,7 +1145,8 @@ static int ov5645_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	if (xclk_freq != 23880000) {
+	/* external clock must be 24MHz, allow 1% tolerance */
+	if (xclk_freq < 23760000 || xclk_freq > 24240000) {
 		dev_err(dev, "external clock frequency %u is not supported\n",
 			xclk_freq);
 		return -EINVAL;