[media] adv7604: Cache register contents when reading multiple bits

When extracting multiple bits from a single register read the register
once and extract the bits on the read value.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/i2c/adv7604.c

@@ -1207,6 +1207,8 @@ static int stdi2dv_timings(struct v4l2_subdev *sd,
 
 static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi)
 {
+	u8 polarity;
+
 	if (no_lock_stdi(sd) || no_lock_sspd(sd)) {
 		v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n", __func__);
 		return -1;
@@ -1219,11 +1221,12 @@ static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi)
 	stdi->interlaced = io_read(sd, 0x12) & 0x10;
 
 	/* read SSPD */
-	if ((cp_read(sd, 0xb5) & 0x03) == 0x01) {
-		stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ?
-				((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x');
-		stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ?
-				((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x');
+	polarity = cp_read(sd, 0xb5);
+	if ((polarity & 0x03) == 0x01) {
+		stdi->hs_pol = polarity & 0x10
+			     ? (polarity & 0x08 ? '+' : '-') : 'x';
+		stdi->vs_pol = polarity & 0x40
+			     ? (polarity & 0x20 ? '+' : '-') : 'x';
 	} else {
 		stdi->hs_pol = 'x';
 		stdi->vs_pol = 'x';
@@ -1881,6 +1884,8 @@ static int adv7604_log_status(struct v4l2_subdev *sd)
 	struct v4l2_dv_timings timings;
 	struct stdi_readback stdi;
 	u8 reg_io_0x02 = io_read(sd, 0x02);
+	u8 edid_enabled;
+	u8 cable_det;
 
 	static const char * const csc_coeff_sel_rb[16] = {
 		"bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB",
@@ -1910,20 +1915,22 @@ static int adv7604_log_status(struct v4l2_subdev *sd)
 
 	v4l2_info(sd, "-----Chip status-----\n");
 	v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on");
+	edid_enabled = rep_read(sd, 0x7d);
 	v4l2_info(sd, "EDID enabled port A: %s, B: %s, C: %s, D: %s\n",
-			((rep_read(sd, 0x7d) & 0x01) ? "Yes" : "No"),
-			((rep_read(sd, 0x7d) & 0x02) ? "Yes" : "No"),
-			((rep_read(sd, 0x7d) & 0x04) ? "Yes" : "No"),
-			((rep_read(sd, 0x7d) & 0x08) ? "Yes" : "No"));
+			((edid_enabled & 0x01) ? "Yes" : "No"),
+			((edid_enabled & 0x02) ? "Yes" : "No"),
+			((edid_enabled & 0x04) ? "Yes" : "No"),
+			((edid_enabled & 0x08) ? "Yes" : "No"));
 	v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
 			"enabled" : "disabled");
 
 	v4l2_info(sd, "-----Signal status-----\n");
+	cable_det = io_read(sd, 0x6f);
 	v4l2_info(sd, "Cable detected (+5V power) port A: %s, B: %s, C: %s, D: %s\n",
-			((io_read(sd, 0x6f) & 0x10) ? "Yes" : "No"),
-			((io_read(sd, 0x6f) & 0x08) ? "Yes" : "No"),
-			((io_read(sd, 0x6f) & 0x04) ? "Yes" : "No"),
-			((io_read(sd, 0x6f) & 0x02) ? "Yes" : "No"));
+			((cable_det & 0x10) ? "Yes" : "No"),
+			((cable_det & 0x08) ? "Yes" : "No"),
+			((cable_det & 0x04) ? "Yes" : "No"),
+			((cable_det & 0x02) ? "Yes" : "No"));
 	v4l2_info(sd, "TMDS signal detected: %s\n",
 			no_signal_tmds(sd) ? "false" : "true");
 	v4l2_info(sd, "TMDS signal locked: %s\n",