Merge tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB and PHY fixes and quirk updates for 4.3-rc5.

  Nothing major here, full details in the shortlog, and all of these
  have been in linux-next for a while"

* tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: Add device quirk for Logitech PTZ cameras
  USB: chaoskey read offset bug
  USB: Add reset-resume quirk for two Plantronics usb headphones.
  usb: renesas_usbhs: Add support for R-Car H3
  usb: renesas_usbhs: fix build warning if 64-bit architecture
  usb: gadget: bdc: fix memory leak
  phy: berlin-sata: Fix module autoload for OF platform driver
  phy: rockchip-usb: power down phy when rockchip phy probe
  phy: qcom-ufs: fix build error when the component is built as a module

Documentation/devicetree/bindings/usb/renesas_usbhs.txt

@@ -5,6 +5,7 @@ Required properties:
 	- "renesas,usbhs-r8a7790"
 	- "renesas,usbhs-r8a7791"
 	- "renesas,usbhs-r8a7794"
+	- "renesas,usbhs-r8a7795"
   - reg: Base address and length of the register for the USBHS
   - interrupts: Interrupt specifier for the USBHS
   - clocks: A list of phandle + clock specifier pairs

drivers/phy/phy-berlin-sata.c

@@ -276,6 +276,7 @@ static const struct of_device_id phy_berlin_sata_of_match[] = {
 	{ .compatible = "marvell,berlin2q-sata-phy" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
 
 static struct platform_driver phy_berlin_sata_driver = {
 	.probe	= phy_berlin_sata_probe,

drivers/phy/phy-qcom-ufs.c

@@ -432,6 +432,7 @@ out_disable_src:
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
 
 static
 int ufs_qcom_phy_disable_vreg(struct phy *phy,
@@ -474,6 +475,7 @@ void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
 		phy->is_ref_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
 
 #define UFS_REF_CLK_EN	(1 << 5)
 
@@ -517,11 +519,13 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
 
 void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
 
 /* Turn ON M-PHY RMMI interface clocks */
 int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
@@ -550,6 +554,7 @@ int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
 
 /* Turn OFF M-PHY RMMI interface clocks */
 void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
@@ -562,6 +567,7 @@ void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
 		phy->is_iface_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
 
 int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 {
@@ -578,6 +584,7 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
 
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 {
@@ -595,6 +602,7 @@ int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
 
 void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 					  u8 major, u16 minor, u16 step)
@@ -605,6 +613,7 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 	ufs_qcom_phy->host_ctrl_rev_minor = minor;
 	ufs_qcom_phy->host_ctrl_rev_step = step;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
 
 int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 {
@@ -625,6 +634,7 @@ int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
 
 int ufs_qcom_phy_remove(struct phy *generic_phy,
 			struct ufs_qcom_phy *ufs_qcom_phy)
@@ -662,6 +672,7 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 	return ufs_qcom_phy->phy_spec_ops->
 			is_physical_coding_sublayer_ready(ufs_qcom_phy);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
 
 int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {

drivers/phy/phy-rockchip-usb.c

@@ -98,6 +98,7 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
 	struct device_node *child;
 	struct regmap *grf;
 	unsigned int reg_offset;
+	int err;
 
 	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
 	if (IS_ERR(grf)) {
@@ -129,6 +130,11 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
 			return PTR_ERR(rk_phy->phy);
 		}
 		phy_set_drvdata(rk_phy->phy, rk_phy);
+
+		/* only power up usb phy when it use, so disable it when init*/
+		err = rockchip_usb_phy_power(rk_phy, 1);
+		if (err)
+			return err;
 	}
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);

drivers/usb/core/quirks.c

@@ -54,6 +54,13 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
 	{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Logitech ConferenceCam CC3000e */
+	{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech PTZ Pro Camera */
+	{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Logitech Quickcam Fusion */
 	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -78,6 +85,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Plantronic Audio 655 DSP */
+	{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Plantronic Audio 648 USB */
+	{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Artisman Watchdog Dongle */
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

drivers/usb/gadget/udc/bdc/bdc_ep.c

@@ -159,8 +159,10 @@ static int ep_bd_list_alloc(struct bdc_ep *ep)
 		bd_table->start_bd = dma_pool_alloc(bdc->bd_table_pool,
 							GFP_ATOMIC,
 							&dma);
-		if (!bd_table->start_bd)
+		if (!bd_table->start_bd) {
+			kfree(bd_table);
 			goto fail;
+		}
 
 		bd_table->dma = dma;
 

drivers/usb/misc/chaoskey.c

@@ -472,7 +472,7 @@ static int chaoskey_rng_read(struct hwrng *rng, void *data,
 	if (this_time > max)
 		this_time = max;
 
-	memcpy(data, dev->buf, this_time);
+	memcpy(data, dev->buf + dev->used, this_time);
 
 	dev->used += this_time;
 

drivers/usb/renesas_usbhs/common.c

@@ -476,6 +476,11 @@ static const struct of_device_id usbhs_of_match[] = {
 		.compatible = "renesas,usbhs-r8a7794",
 		.data = (void *)USBHS_TYPE_RCAR_GEN2,
 	},
+	{
+		/* Gen3 is compatible with Gen2 */
+		.compatible = "renesas,usbhs-r8a7795",
+		.data = (void *)USBHS_TYPE_RCAR_GEN2,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, usbhs_of_match);
@@ -493,7 +498,7 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 		return NULL;
 
 	dparam = &info->driver_param;
-	dparam->type = of_id ? (u32)of_id->data : 0;
+	dparam->type = of_id ? (uintptr_t)of_id->data : 0;
 	if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
 		dparam->buswait_bwait = tmp;
 	gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,

include/linux/usb/renesas_usbhs.h

@@ -157,7 +157,7 @@ struct renesas_usbhs_driver_param {
 	 */
 	int pio_dma_border; /* default is 64byte */
 
-	u32 type;
+	uintptr_t type;
 	u32 enable_gpio;
 
 	/*