[media] exynos4-is: Remove support for non-dt platforms

All platforms supported by this driver are going to get device tree
support in this kernel release so remove code that would have been
actually not used any more.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Documentation/video4linux/fimc.txt

@@ -140,39 +140,9 @@ You can either grep through the kernel log to find relevant information, i.e.
 or retrieve the information from /dev/media? with help of the media-ctl tool:
 # media-ctl -p
 
-6. Platform support
-===================
-
-The machine code (arch/arm/plat-samsung and arch/arm/mach-*) must select
-following options:
-
-CONFIG_S5P_DEV_FIMC0       mandatory
-CONFIG_S5P_DEV_FIMC1  \
-CONFIG_S5P_DEV_FIMC2  |    optional
-CONFIG_S5P_DEV_FIMC3  |
-CONFIG_S5P_SETUP_FIMC /
-CONFIG_S5P_DEV_CSIS0  \    optional for MIPI-CSI interface
-CONFIG_S5P_DEV_CSIS1  /
-
-Except that, relevant s5p_device_fimc? should be registered in the machine code
-in addition to a "s5p-fimc-md" platform device to which the media device driver
-is bound.  The "s5p-fimc-md" device instance is required even if only mem-to-mem
-operation is used.
-
-The description of sensor(s) attached to FIMC/MIPI-CSIS camera inputs should be
-passed as the "s5p-fimc-md" device platform_data.  The platform data structure
-is defined in file include/media/s5p_fimc.h.
-
 7. Build
 ========
 
-This driver depends on following config options:
-PLAT_S5P,
-PM_RUNTIME,
-I2C,
-REGULATOR,
-VIDEO_V4L2_SUBDEV_API,
-
 If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m)
 two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and
 optional s5p-csis.ko (MIPI-CSI receiver subdev).

MAINTAINERS

@@ -7654,7 +7654,6 @@ L:	linux-media@vger.kernel.org
 Q:	https://patchwork.linuxtv.org/project/linux-media/list/
 S:	Supported
 F:	drivers/media/platform/exynos4-is/
-F:	include/media/s5p_fimc.h
 
 SAMSUNG S3C24XX/S3C64XX SOC SERIES CAMIF DRIVER
 M:	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>

drivers/media/platform/exynos4-is/Kconfig

@@ -3,6 +3,7 @@ config VIDEO_SAMSUNG_EXYNOS4_IS
 	bool "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver"
 	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on (PLAT_S5P || ARCH_EXYNOS)
+	depends on OF && COMMON_CLK
 	help
 	  Say Y here to enable camera host interface devices for
 	  Samsung S5P and EXYNOS SoC series.
@@ -17,7 +18,7 @@ config VIDEO_S5P_FIMC
 	depends on I2C
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
-	select MFD_SYSCON if OF
+	select MFD_SYSCON
 	select VIDEO_EXYNOS4_IS_COMMON
 	help
 	  This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC camera host

drivers/media/platform/exynos4-is/common.c

@@ -10,7 +10,7 @@
  */
 
 #include <linux/module.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 #include "common.h"
 
 /* Called with the media graph mutex held or entity->stream_count > 0. */

drivers/media/platform/exynos4-is/fimc-core.h

@@ -27,7 +27,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #define dbg(fmt, args...) \
 	pr_debug("%s:%d: " fmt "\n", __func__, __LINE__, ##args)

drivers/media/platform/exynos4-is/fimc-isp-video.c

@@ -30,7 +30,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #include "common.h"
 #include "media-dev.h"

drivers/media/platform/exynos4-is/fimc-isp.h

@@ -24,7 +24,7 @@
 #include <media/videobuf2-core.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 extern int fimc_isp_debug;
 

drivers/media/platform/exynos4-is/fimc-lite-reg.c

@@ -12,7 +12,7 @@
 #include <linux/bitops.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #include "fimc-lite-reg.h"
 #include "fimc-lite.h"

drivers/media/platform/exynos4-is/fimc-lite.c

@@ -30,7 +30,7 @@
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #include "common.h"
 #include "fimc-core.h"

drivers/media/platform/exynos4-is/fimc-lite.h

@@ -23,7 +23,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #define FIMC_LITE_DRV_NAME	"exynos-fimc-lite"
 #define FLITE_CLK_NAME		"flite"

drivers/media/platform/exynos4-is/fimc-reg.c

@@ -13,7 +13,7 @@
 #include <linux/io.h>
 #include <linux/regmap.h>
 
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 #include "media-dev.h"
 
 #include "fimc-reg.h"

drivers/media/platform/exynos4-is/media-dev.c

@@ -31,7 +31,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-of.h>
 #include <media/media-device.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #include "media-dev.h"
 #include "fimc-core.h"
@@ -39,10 +39,6 @@
 #include "fimc-lite.h"
 #include "mipi-csis.h"
 
-static int __fimc_md_set_camclk(struct fimc_md *fmd,
-				struct fimc_source_info *si,
-				bool on);
-
 /* Set up image sensor subdev -> FIMC capture node notifications. */
 static void __setup_sensor_notification(struct fimc_md *fmd,
 					struct v4l2_subdev *sensor,
@@ -223,17 +219,10 @@ static int __fimc_pipeline_open(struct exynos_media_pipeline *ep,
 			return ret;
 	}
 
-	ret = fimc_md_set_camclk(sd, true);
-	if (ret < 0)
-		goto err_wbclk;
-
 	ret = fimc_pipeline_s_power(p, 1);
 	if (!ret)
 		return 0;
 
-	fimc_md_set_camclk(sd, false);
-
-err_wbclk:
 	if (!IS_ERR(fmd->wbclk[CLK_IDX_WB_B]) && p->subdevs[IDX_IS_ISP])
 		clk_disable_unprepare(fmd->wbclk[CLK_IDX_WB_B]);
 
@@ -259,7 +248,6 @@ static int __fimc_pipeline_close(struct exynos_media_pipeline *ep)
 	}
 
 	ret = fimc_pipeline_s_power(p, 0);
-	fimc_md_set_camclk(sd, false);
 
 	fmd = entity_to_fimc_mdev(&sd->entity);
 
@@ -337,75 +325,14 @@ static void fimc_md_pipelines_free(struct fimc_md *fmd)
 	}
 }
 
-/*
- * Sensor subdevice helper functions
- */
-static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
-						struct fimc_source_info *si)
-{
-	struct i2c_adapter *adapter;
-	struct v4l2_subdev *sd = NULL;
-
-	if (!si || !fmd)
-		return NULL;
-	/*
-	 * If FIMC bus type is not Writeback FIFO assume it is same
-	 * as sensor_bus_type.
-	 */
-	si->fimc_bus_type = si->sensor_bus_type;
-
-	adapter = i2c_get_adapter(si->i2c_bus_num);
-	if (!adapter) {
-		v4l2_warn(&fmd->v4l2_dev,
-			  "Failed to get I2C adapter %d, deferring probe\n",
-			  si->i2c_bus_num);
-		return ERR_PTR(-EPROBE_DEFER);
-	}
-	sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter,
-						si->board_info, NULL);
-	if (IS_ERR_OR_NULL(sd)) {
-		i2c_put_adapter(adapter);
-		v4l2_warn(&fmd->v4l2_dev,
-			  "Failed to acquire subdev %s, deferring probe\n",
-			  si->board_info->type);
-		return ERR_PTR(-EPROBE_DEFER);
-	}
-	v4l2_set_subdev_hostdata(sd, si);
-	sd->grp_id = GRP_ID_SENSOR;
-
-	v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice %s\n",
-		  sd->name);
-	return sd;
-}
-
-static void fimc_md_unregister_sensor(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct i2c_adapter *adapter;
-
-	if (!client || client->dev.of_node)
-		return;
-
-	v4l2_device_unregister_subdev(sd);
-
-	adapter = client->adapter;
-	i2c_unregister_device(client);
-	if (adapter)
-		i2c_put_adapter(adapter);
-}
-
-#ifdef CONFIG_OF
 /* Parse port node and register as a sub-device any sensor specified there. */
 static int fimc_md_parse_port_node(struct fimc_md *fmd,
 				   struct device_node *port,
 				   unsigned int index)
 {
+	struct fimc_source_info *pd = &fmd->sensor[index].pdata;
 	struct device_node *rem, *ep, *np;
-	struct fimc_source_info *pd;
 	struct v4l2_of_endpoint endpoint;
-	u32 val;
-
-	pd = &fmd->sensor[index].pdata;
 
 	/* Assume here a port node can have only one endpoint node. */
 	ep = of_get_next_child(port, NULL);
@@ -425,20 +352,6 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
 							ep->full_name);
 		return 0;
 	}
-	if (!of_property_read_u32(rem, "samsung,camclk-out", &val))
-		pd->clk_id = val;
-
-	if (!of_property_read_u32(rem, "clock-frequency", &val))
-		pd->clk_frequency = val;
-	else
-		pd->clk_frequency = DEFAULT_SENSOR_CLK_FREQ;
-
-	if (pd->clk_frequency == 0) {
-		v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n",
-			 rem->full_name);
-		of_node_put(rem);
-		return -EINVAL;
-	}
 
 	if (fimc_input_is_parallel(endpoint.base.port)) {
 		if (endpoint.bus_type == V4L2_MBUS_PARALLEL)
@@ -485,14 +398,26 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd,
 }
 
 /* Register all SoC external sub-devices */
-static int fimc_md_of_sensors_register(struct fimc_md *fmd,
-				       struct device_node *np)
+static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 {
 	struct device_node *parent = fmd->pdev->dev.of_node;
 	struct device_node *node, *ports;
 	int index = 0;
 	int ret;
 
+	/*
+	 * Runtime resume one of the FIMC entities to make sure
+	 * the sclk_cam clocks are not globally disabled.
+	 */
+	if (!fmd->pmf)
+		return -ENXIO;
+
+	ret = pm_runtime_get_sync(fmd->pmf);
+	if (ret < 0)
+		return ret;
+
+	fmd->num_sensors = 0;
+
 	/* Attach sensors linked to MIPI CSI-2 receivers */
 	for_each_available_child_of_node(parent, node) {
 		struct device_node *port;
@@ -506,14 +431,14 @@ static int fimc_md_of_sensors_register(struct fimc_md *fmd,
 
 		ret = fimc_md_parse_port_node(fmd, port, index);
 		if (ret < 0)
-			return ret;
+			goto rpm_put;
 		index++;
 	}
 
 	/* Attach sensors listed in the parallel-ports node */
 	ports = of_get_child_by_name(parent, "parallel-ports");
 	if (!ports)
-		return 0;
+		goto rpm_put;
 
 	for_each_child_of_node(ports, node) {
 		ret = fimc_md_parse_port_node(fmd, node, index);
@@ -521,8 +446,9 @@ static int fimc_md_of_sensors_register(struct fimc_md *fmd,
 			break;
 		index++;
 	}
-
-	return 0;
+rpm_put:
+	pm_runtime_put(fmd->pmf);
+	return ret;
 }
 
 static int __of_get_csis_id(struct device_node *np)
@@ -535,68 +461,10 @@ static int __of_get_csis_id(struct device_node *np)
 	of_property_read_u32(np, "reg", &reg);
 	return reg - FIMC_INPUT_MIPI_CSI2_0;
 }
-#else
-#define fimc_md_of_sensors_register(fmd, np) (-ENOSYS)
-#define __of_get_csis_id(np) (-ENOSYS)
-#endif
-
-static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
-{
-	struct s5p_platform_fimc *pdata = fmd->pdev->dev.platform_data;
-	struct device_node *of_node = fmd->pdev->dev.of_node;
-	int num_clients = 0;
-	int ret, i;
-
-	/*
-	 * Runtime resume one of the FIMC entities to make sure
-	 * the sclk_cam clocks are not globally disabled.
-	 */
-	if (!fmd->pmf)
-		return -ENXIO;
-
-	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0)
-		return ret;
-
-	if (of_node) {
-		fmd->num_sensors = 0;
-		ret = fimc_md_of_sensors_register(fmd, of_node);
-	} else if (pdata) {
-		WARN_ON(pdata->num_clients > ARRAY_SIZE(fmd->sensor));
-		num_clients = min_t(u32, pdata->num_clients,
-				    ARRAY_SIZE(fmd->sensor));
-		fmd->num_sensors = num_clients;
-
-		for (i = 0; i < num_clients; i++) {
-			struct fimc_sensor_info *si = &fmd->sensor[i];
-			struct v4l2_subdev *sd;
-
-			si->pdata = pdata->source_info[i];
-			ret = __fimc_md_set_camclk(fmd, &si->pdata, true);
-			if (ret)
-				break;
-			sd = fimc_md_register_sensor(fmd, &si->pdata);
-			ret = __fimc_md_set_camclk(fmd, &si->pdata, false);
-
-			if (IS_ERR(sd)) {
-				si->subdev = NULL;
-				ret = PTR_ERR(sd);
-				break;
-			}
-			si->subdev = sd;
-			if (ret)
-				break;
-		}
-	}
-
-	pm_runtime_put(fmd->pmf);
-	return ret;
-}
 
 /*
  * MIPI-CSIS, FIMC and FIMC-LITE platform devices registration.
  */
-
 static int register_fimc_lite_entity(struct fimc_md *fmd,
 				     struct fimc_lite *fimc_lite)
 {
@@ -753,35 +621,9 @@ dev_unlock:
 	return ret;
 }
 
-static int fimc_md_pdev_match(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int plat_entity = -1;
-	int ret;
-	char *p;
-
-	if (!get_device(dev))
-		return -ENODEV;
-
-	if (!strcmp(pdev->name, CSIS_DRIVER_NAME)) {
-		plat_entity = IDX_CSIS;
-	} else {
-		p = strstr(pdev->name, "fimc");
-		if (p && *(p + 4) == 0)
-			plat_entity = IDX_FIMC;
-	}
-
-	if (plat_entity >= 0)
-		ret = fimc_md_register_platform_entity(data, pdev,
-						       plat_entity);
-	put_device(dev);
-	return 0;
-}
-
 /* Register FIMC, FIMC-LITE and CSIS media entities */
-#ifdef CONFIG_OF
-static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
-						 struct device_node *parent)
+static int fimc_md_register_platform_entities(struct fimc_md *fmd,
+					      struct device_node *parent)
 {
 	struct device_node *node;
 	int ret = 0;
@@ -815,9 +657,6 @@ static int fimc_md_register_of_platform_entities(struct fimc_md *fmd,
 
 	return ret;
 }
-#else
-#define fimc_md_register_of_platform_entities(fmd, node) (-ENOSYS)
-#endif
 
 static void fimc_md_unregister_entities(struct fimc_md *fmd)
 {
@@ -845,14 +684,6 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd)
 		v4l2_device_unregister_subdev(fmd->csis[i].sd);
 		fmd->csis[i].sd = NULL;
 	}
-	if (fmd->pdev->dev.of_node == NULL) {
-		for (i = 0; i < fmd->num_sensors; i++) {
-			if (fmd->sensor[i].subdev == NULL)
-				continue;
-			fimc_md_unregister_sensor(fmd->sensor[i].subdev);
-			fmd->sensor[i].subdev = NULL;
-		}
-	}
 
 	if (fmd->fimc_is)
 		v4l2_device_unregister_subdev(&fmd->fimc_is->isp.subdev);
@@ -1137,7 +968,7 @@ static void fimc_md_put_clocks(struct fimc_md *fmd)
 
 static int fimc_md_get_clocks(struct fimc_md *fmd)
 {
-	struct device *dev = NULL;
+	struct device *dev = &fmd->pdev->dev;
 	char clk_name[32];
 	struct clk *clock;
 	int i, ret = 0;
@@ -1145,16 +976,12 @@ static int fimc_md_get_clocks(struct fimc_md *fmd)
 	for (i = 0; i < FIMC_MAX_CAMCLKS; i++)
 		fmd->camclk[i].clock = ERR_PTR(-EINVAL);
 
-	if (fmd->pdev->dev.of_node)
-		dev = &fmd->pdev->dev;
-
 	for (i = 0; i < FIMC_MAX_CAMCLKS; i++) {
 		snprintf(clk_name, sizeof(clk_name), "sclk_cam%u", i);
 		clock = clk_get(dev, clk_name);
 
 		if (IS_ERR(clock)) {
-			dev_err(&fmd->pdev->dev, "Failed to get clock: %s\n",
-								clk_name);
+			dev_err(dev, "Failed to get clock: %s\n", clk_name);
 			ret = PTR_ERR(clock);
 			break;
 		}
@@ -1188,86 +1015,6 @@ static int fimc_md_get_clocks(struct fimc_md *fmd)
 	return ret;
 }
 
-static int __fimc_md_set_camclk(struct fimc_md *fmd,
-				struct fimc_source_info *si,
-				bool on)
-{
-	struct fimc_camclk_info *camclk;
-	int ret = 0;
-
-	/*
-	 * When device tree is used the sensor drivers are supposed to
-	 * control the clock themselves. This whole function will be
-	 * removed once S5PV210 platform is converted to the device tree.
-	 */
-	if (fmd->pdev->dev.of_node)
-		return 0;
-
-	if (WARN_ON(si->clk_id >= FIMC_MAX_CAMCLKS) || !fmd || !fmd->pmf)
-		return -EINVAL;
-
-	camclk = &fmd->camclk[si->clk_id];
-
-	dbg("camclk %d, f: %lu, use_count: %d, on: %d",
-	    si->clk_id, si->clk_frequency, camclk->use_count, on);
-
-	if (on) {
-		if (camclk->use_count > 0 &&
-		    camclk->frequency != si->clk_frequency)
-			return -EINVAL;
-
-		if (camclk->use_count++ == 0) {
-			clk_set_rate(camclk->clock, si->clk_frequency);
-			camclk->frequency = si->clk_frequency;
-			ret = pm_runtime_get_sync(fmd->pmf);
-			if (ret < 0)
-				return ret;
-			ret = clk_prepare_enable(camclk->clock);
-			dbg("Enabled camclk %d: f: %lu", si->clk_id,
-			    clk_get_rate(camclk->clock));
-		}
-		return ret;
-	}
-
-	if (WARN_ON(camclk->use_count == 0))
-		return 0;
-
-	if (--camclk->use_count == 0) {
-		clk_disable_unprepare(camclk->clock);
-		pm_runtime_put(fmd->pmf);
-		dbg("Disabled camclk %d", si->clk_id);
-	}
-	return ret;
-}
-
-/**
- * fimc_md_set_camclk - peripheral sensor clock setup
- * @sd: sensor subdev to configure sclk_cam clock for
- * @on: 1 to enable or 0 to disable the clock
- *
- * There are 2 separate clock outputs available in the SoC for external
- * image processors. These clocks are shared between all registered FIMC
- * devices to which sensors can be attached, either directly or through
- * the MIPI CSI receiver. The clock is allowed here to be used by
- * multiple sensors concurrently if they use same frequency.
- * This function should only be called when the graph mutex is held.
- */
-int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
-{
-	struct fimc_source_info *si = v4l2_get_subdev_hostdata(sd);
-	struct fimc_md *fmd = entity_to_fimc_mdev(&sd->entity);
-
-	/*
-	 * If there is a clock provider registered the sensors will
-	 * handle their clock themselves, no need to control it on
-	 * the host interface side.
-	 */
-	if (fmd->clk_provider.num_clocks > 0)
-		return 0;
-
-	return __fimc_md_set_camclk(fmd, si, on);
-}
-
 static int __fimc_md_modify_pipeline(struct media_entity *entity, bool enable)
 {
 	struct exynos_video_entity *ve;
@@ -1426,7 +1173,6 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static int cam_clk_prepare(struct clk_hw *hw)
 {
 	struct cam_clk *camclk = to_cam_clk(hw);
@@ -1518,10 +1264,6 @@ err:
 	fimc_md_unregister_clk_provider(fmd);
 	return ret;
 }
-#else
-#define fimc_md_register_clk_provider(fmd) (0)
-#define fimc_md_unregister_clk_provider(fmd)
-#endif
 
 static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
 				 struct v4l2_subdev *subdev,
@@ -1585,8 +1327,8 @@ static int fimc_md_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	spin_lock_init(&fmd->slock);
-	fmd->pdev = pdev;
 	INIT_LIST_HEAD(&fmd->pipelines);
+	fmd->pdev = pdev;
 
 	strlcpy(fmd->media_dev.model, "SAMSUNG S5P FIMC",
 		sizeof(fmd->media_dev.model));
@@ -1599,6 +1341,7 @@ static int fimc_md_probe(struct platform_device *pdev)
 	strlcpy(v4l2_dev->name, "s5p-fimc-md", sizeof(v4l2_dev->name));
 
 	fmd->use_isp = fimc_md_is_isp_available(dev->of_node);
+	fmd->user_subdev_api = true;
 
 	ret = v4l2_device_register(dev, &fmd->v4l2_dev);
 	if (ret < 0) {
@@ -1616,8 +1359,6 @@ static int fimc_md_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_md;
 
-	fmd->user_subdev_api = (dev->of_node != NULL);
-
 	ret = fimc_md_get_pinctrl(fmd);
 	if (ret < 0) {
 		if (ret != EPROBE_DEFER)
@@ -1630,22 +1371,16 @@ static int fimc_md_probe(struct platform_device *pdev)
 	/* Protect the media graph while we're registering entities */
 	mutex_lock(&fmd->media_dev.graph_mutex);
 
-	if (dev->of_node)
-		ret = fimc_md_register_of_platform_entities(fmd, dev->of_node);
-	else
-		ret = bus_for_each_dev(&platform_bus_type, NULL, fmd,
-						fimc_md_pdev_match);
+	ret = fimc_md_register_platform_entities(fmd, dev->of_node);
 	if (ret) {
 		mutex_unlock(&fmd->media_dev.graph_mutex);
 		goto err_clk;
 	}
 
-	if (dev->platform_data || dev->of_node) {
-		ret = fimc_md_register_sensor_entities(fmd);
-		if (ret) {
-			mutex_unlock(&fmd->media_dev.graph_mutex);
-			goto err_m_ent;
-		}
+	ret = fimc_md_register_sensor_entities(fmd);
+	if (ret) {
+		mutex_unlock(&fmd->media_dev.graph_mutex);
+		goto err_m_ent;
 	}
 
 	mutex_unlock(&fmd->media_dev.graph_mutex);

drivers/media/platform/exynos4-is/media-dev.h

@@ -19,7 +19,7 @@
 #include <media/media-entity.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-subdev.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 
 #include "fimc-core.h"
 #include "fimc-lite.h"
@@ -94,9 +94,7 @@ struct fimc_sensor_info {
 };
 
 struct cam_clk {
-#ifdef CONFIG_COMMON_CLK
 	struct clk_hw hw;
-#endif
 	struct fimc_md *fmd;
 };
 #define to_cam_clk(_hw) container_of(_hw, struct cam_clk, hw)
@@ -144,9 +142,7 @@ struct fimc_md {
 
 	struct cam_clk_provider {
 		struct clk *clks[FIMC_MAX_CAMCLKS];
-#ifdef CONFIG_COMMON_CLK
 		struct clk_onecell_data clk_data;
-#endif
 		struct device_node *of_node;
 		struct cam_clk camclk[FIMC_MAX_CAMCLKS];
 		int num_clocks;

drivers/media/platform/exynos4-is/mipi-csis.c

@@ -22,14 +22,13 @@
 #include <linux/of.h>
 #include <linux/of_graph.h>
 #include <linux/phy/phy.h>
-#include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/videodev2.h>
-#include <media/s5p_fimc.h>
+#include <media/exynos-fimc.h>
 #include <media/v4l2-of.h>
 #include <media/v4l2-subdev.h>
 
@@ -730,26 +729,6 @@ static irqreturn_t s5pcsis_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int s5pcsis_get_platform_data(struct platform_device *pdev,
-				     struct csis_state *state)
-{
-	struct s5p_platform_mipi_csis *pdata = pdev->dev.platform_data;
-
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "Platform data not specified\n");
-		return -EINVAL;
-	}
-
-	state->clk_frequency = pdata->clk_rate;
-	state->num_lanes = pdata->lanes;
-	state->hs_settle = pdata->hs_settle;
-	state->index = max(0, pdev->id);
-	state->max_num_lanes = state->index ? CSIS1_MAX_LANES :
-					      CSIS0_MAX_LANES;
-	return 0;
-}
-
-#ifdef CONFIG_OF
 static int s5pcsis_parse_dt(struct platform_device *pdev,
 			    struct csis_state *state)
 {
@@ -787,9 +766,6 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
 
 	return 0;
 }
-#else
-#define s5pcsis_parse_dt(pdev, state) (-ENOSYS)
-#endif
 
 static int s5pcsis_pm_resume(struct device *dev, bool runtime);
 static const struct of_device_id s5pcsis_of_match[];
@@ -812,19 +788,14 @@ static int s5pcsis_probe(struct platform_device *pdev)
 	spin_lock_init(&state->slock);
 	state->pdev = pdev;
 
-	if (dev->of_node) {
-		of_id = of_match_node(s5pcsis_of_match, dev->of_node);
-		if (WARN_ON(of_id == NULL))
-			return -EINVAL;
-
-		drv_data = of_id->data;
-		state->interrupt_mask = drv_data->interrupt_mask;
+	of_id = of_match_node(s5pcsis_of_match, dev->of_node);
+	if (WARN_ON(of_id == NULL))
+		return -EINVAL;
 
-		ret = s5pcsis_parse_dt(pdev, state);
-	} else {
-		ret = s5pcsis_get_platform_data(pdev, state);
-	}
+	drv_data = of_id->data;
+	state->interrupt_mask = drv_data->interrupt_mask;
 
+	ret = s5pcsis_parse_dt(pdev, state);
 	if (ret < 0)
 		return ret;
 

include/linux/platform_data/mipi-csis.h

@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd.
- *
- * Samsung S5P/Exynos SoC series MIPI CSIS device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate:    bus clock frequency
- * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM
- * @lanes:       number of data lanes used
- * @hs_settle:   HS-RX settle time
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 wclk_source;
-	u8 lanes;
-	u8 hs_settle;
-};
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */

include/media/s5p_fimc.h → include/media/exynos-fimc.h

@@ -61,41 +61,20 @@ enum fimc_bus_type {
 #define GRP_ID_FLITE		(1 << 13)
 #define GRP_ID_FIMC_IS		(1 << 14)
 
-struct i2c_board_info;
-
 /**
  * struct fimc_source_info - video source description required for the host
  *			     interface configuration
  *
- * @board_info: pointer to I2C subdevice's board info
- * @clk_frequency: frequency of the clock the host interface provides to sensor
  * @fimc_bus_type: FIMC camera input type
  * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc.
  * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*)
- * @i2c_bus_num: i2c control bus id the sensor is attached to
  * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
- * @clk_id: index of the SoC peripheral clock for sensors
  */
 struct fimc_source_info {
-	struct i2c_board_info *board_info;
-	unsigned long clk_frequency;
 	enum fimc_bus_type fimc_bus_type;
 	enum fimc_bus_type sensor_bus_type;
 	u16 flags;
-	u16 i2c_bus_num;
 	u16 mux_id;
-	u8 clk_id;
-};
-
-/**
- * struct s5p_platform_fimc - camera host interface platform data
- *
- * @source_info: properties of an image source for the host interface setup
- * @num_clients: the number of attached image sources
- */
-struct s5p_platform_fimc {
-	struct fimc_source_info *source_info;
-	int num_clients;
 };
 
 /*