pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33

PG8, PG9 is said to be the CTS/RTS pins for UART1 according to the A23/33
datasheets. However, the function is wrongly named "uart2" in the pinctrl
driver. This patch fixes this by modifying them to be named "uart1".

Cc: stable@vger.kernel.org
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c

@@ -485,12 +485,12 @@ static const struct sunxi_desc_pin sun8i_a23_pins[] = {
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x2, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* RTS */
 		  SUNXI_FUNCTION_IRQ_BANK(0x4, 2, 8)),	/* PG_EINT8 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x2, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* CTS */
 		  SUNXI_FUNCTION_IRQ_BANK(0x4, 2, 9)),	/* PG_EINT9 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),

drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c

@@ -407,12 +407,12 @@ static const struct sunxi_desc_pin sun8i_a33_pins[] = {
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x2, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* RTS */
 		  SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 8)),	/* PG_EINT8 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
-		  SUNXI_FUNCTION(0x2, "uart2"),		/* CTS */
+		  SUNXI_FUNCTION(0x2, "uart1"),		/* CTS */
 		  SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 9)),	/* PG_EINT9 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),