wil6210: add support for Talyn-MB (Talyn ver 2.0) device

Add changes to support initialization of Talyn-MB wil6210
device:
- Add definition for Talyn-MB new JTAG id
- Define talyn_mb_fw_mapping array
- Add Talyn-MB reset sequence

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/wil6210/main.c

@@ -736,14 +736,24 @@ static void wil_bl_prepare_halt(struct wil6210_priv *wil)
 
 static inline void wil_halt_cpu(struct wil6210_priv *wil)
 {
-	wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
-	wil_w(wil, RGF_USER_MAC_CPU_0,  BIT_USER_MAC_CPU_MAN_RST);
+	if (wil->hw_version >= HW_VER_TALYN_MB) {
+		wil_w(wil, RGF_USER_USER_CPU_0_TALYN_MB,
+		      BIT_USER_USER_CPU_MAN_RST);
+		wil_w(wil, RGF_USER_MAC_CPU_0_TALYN_MB,
+		      BIT_USER_MAC_CPU_MAN_RST);
+	} else {
+		wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
+		wil_w(wil, RGF_USER_MAC_CPU_0,  BIT_USER_MAC_CPU_MAN_RST);
+	}
 }
 
 static inline void wil_release_cpu(struct wil6210_priv *wil)
 {
 	/* Start CPU */
-	wil_w(wil, RGF_USER_USER_CPU_0, 1);
+	if (wil->hw_version >= HW_VER_TALYN_MB)
+		wil_w(wil, RGF_USER_USER_CPU_0_TALYN_MB, 1);
+	else
+		wil_w(wil, RGF_USER_USER_CPU_0, 1);
 }
 
 static void wil_set_oob_mode(struct wil6210_priv *wil, u8 mode)
@@ -811,10 +821,17 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
 	wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f);
 	wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf);
 
-	wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
-	wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
-	wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0);
-	wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FE00);
+	if (wil->hw_version >= HW_VER_TALYN_MB) {
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x7e000000);
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003f);
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0xc00000f0);
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xffe7fe00);
+	} else {
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xfe000000);
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003f);
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0);
+		wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xffe7fe00);
+	}
 
 	wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0);
 	wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0);
@@ -1042,8 +1059,14 @@ static int wil_get_otp_info(struct wil6210_priv *wil)
 	struct net_device *ndev = wil->main_ndev;
 	struct wiphy *wiphy = wil_to_wiphy(wil);
 	u8 mac[8];
+	int mac_addr;
+
+	if (wil->hw_version >= HW_VER_TALYN_MB)
+		mac_addr = RGF_OTP_MAC_TALYN_MB;
+	else
+		mac_addr = RGF_OTP_MAC;
 
-	wil_memcpy_fromio_32(mac, wil->csr + HOSTADDR(RGF_OTP_MAC),
+	wil_memcpy_fromio_32(mac, wil->csr + HOSTADDR(mac_addr),
 			     sizeof(mac));
 	if (!is_valid_ether_addr(mac)) {
 		wil_err(wil, "Invalid MAC %pM\n", mac);
@@ -1147,8 +1170,13 @@ static void wil_pre_fw_config(struct wil6210_priv *wil)
 	/* it is W1C, clear by writing back same value */
 	wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
 	wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
-	/* clear PAL_UNIT_ICR (potential D0->D3 leftover) */
-	wil_s(wil, RGF_PAL_UNIT_ICR + offsetof(struct RGF_ICR, ICR), 0);
+	/* clear PAL_UNIT_ICR (potential D0->D3 leftover)
+	 * In Talyn-MB host cannot access this register due to
+	 * access control, hence PAL_UNIT_ICR is cleared by the FW
+	 */
+	if (wil->hw_version < HW_VER_TALYN_MB)
+		wil_s(wil, RGF_PAL_UNIT_ICR + offsetof(struct RGF_ICR, ICR),
+		      0);
 
 	if (wil->fw_calib_result > 0) {
 		__le32 val = cpu_to_le32(wil->fw_calib_result |

drivers/net/wireless/ath/wil6210/pcie_bus.c

@@ -85,7 +85,7 @@ int wil_set_capabilities(struct wil6210_priv *wil)
 		wil->rgf_ucode_assert_code_addr = SPARROW_RGF_UCODE_ASSERT_CODE;
 		break;
 	case JTAG_DEV_ID_TALYN:
-		wil->hw_name = "Talyn";
+		wil->hw_name = "Talyn-MA";
 		wil->hw_version = HW_VER_TALYN;
 		memcpy(fw_mapping, talyn_fw_mapping, sizeof(talyn_fw_mapping));
 		wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
@@ -94,6 +94,15 @@ int wil_set_capabilities(struct wil6210_priv *wil)
 		    BIT_NO_FLASH_INDICATION)
 			set_bit(hw_capa_no_flash, wil->hw_capa);
 		break;
+	case JTAG_DEV_ID_TALYN_MB:
+		wil->hw_name = "Talyn-MB";
+		wil->hw_version = HW_VER_TALYN_MB;
+		memcpy(fw_mapping, talyn_mb_fw_mapping,
+		       sizeof(talyn_mb_fw_mapping));
+		wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
+		wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
+		set_bit(hw_capa_no_flash, wil->hw_capa);
+		break;
 	default:
 		wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
 			jtag_id, chip_revision);

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -311,14 +311,20 @@ struct RGF_ICR {
 #define RGF_USER_JTAG_DEV_ID	(0x880b34) /* device ID */
 	#define JTAG_DEV_ID_SPARROW	(0x2632072f)
 	#define JTAG_DEV_ID_TALYN	(0x7e0e1)
+	#define JTAG_DEV_ID_TALYN_MB	(0x1007e0e1)
 
 #define RGF_USER_REVISION_ID		(0x88afe4)
 #define RGF_USER_REVISION_ID_MASK	(3)
 	#define REVISION_ID_SPARROW_B0	(0x0)
 	#define REVISION_ID_SPARROW_D0	(0x3)
 
+#define RGF_OTP_MAC_TALYN_MB		(0x8a0304)
 #define RGF_OTP_MAC			(0x8a0620)
 
+/* Talyn-MB */
+#define RGF_USER_USER_CPU_0_TALYN_MB	(0x8c0138)
+#define RGF_USER_MAC_CPU_0_TALYN_MB	(0x8c0154)
+
 /* crash codes for FW/Ucode stored here */
 
 /* ASSERT RGFs */
@@ -332,6 +338,7 @@ enum {
 	HW_VER_SPARROW_B0, /* REVISION_ID_SPARROW_B0 */
 	HW_VER_SPARROW_D0, /* REVISION_ID_SPARROW_D0 */
 	HW_VER_TALYN,	/* JTAG_DEV_ID_TALYN */
+	HW_VER_TALYN_MB	/* JTAG_DEV_ID_TALYN_MB */
 };
 
 /* popular locations */
@@ -349,7 +356,8 @@ enum {
 /* Hardware definitions end */
 #define SPARROW_FW_MAPPING_TABLE_SIZE 10
 #define TALYN_FW_MAPPING_TABLE_SIZE 13
-#define MAX_FW_MAPPING_TABLE_SIZE 13
+#define TALYN_MB_FW_MAPPING_TABLE_SIZE 19
+#define MAX_FW_MAPPING_TABLE_SIZE 19
 
 struct fw_map {
 	u32 from; /* linker address - from, inclusive */
@@ -363,6 +371,7 @@ struct fw_map {
 extern const struct fw_map sparrow_fw_mapping[SPARROW_FW_MAPPING_TABLE_SIZE];
 extern const struct fw_map sparrow_d0_mac_rgf_ext;
 extern const struct fw_map talyn_fw_mapping[TALYN_FW_MAPPING_TABLE_SIZE];
+extern const struct fw_map talyn_mb_fw_mapping[TALYN_MB_FW_MAPPING_TABLE_SIZE];
 extern struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
 
 /**

drivers/net/wireless/ath/wil6210/wmi.c

@@ -164,6 +164,61 @@ const struct fw_map talyn_fw_mapping[] = {
 	{0x800000, 0x808000, 0xa78000, "uc_data", false},
 };
 
+/**
+ * @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB
+ *
+ * array size should be in sync with the declaration in the wil6210.h
+ *
+ * Talyn MB memory mapping:
+ * Linker address         PCI/Host address
+ *                        0x880000 .. 0xc80000  4Mb BAR0
+ * 0x800000 .. 0x820000   0xa00000 .. 0xa20000  128k DCCM
+ * 0x840000 .. 0x858000   0xa20000 .. 0xa38000  96k PERIPH
+ */
+const struct fw_map talyn_mb_fw_mapping[] = {
+	/* FW code RAM 768k */
+	{0x000000, 0x0c0000, 0x900000, "fw_code", true},
+	/* FW data RAM 128k */
+	{0x800000, 0x820000, 0xa00000, "fw_data", true},
+	/* periph. data RAM 96k */
+	{0x840000, 0x858000, 0xa20000, "fw_peri", true},
+	/* various RGF 40k */
+	{0x880000, 0x88a000, 0x880000, "rgf", true},
+	/* AGC table 4k */
+	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
+	/* Pcie_ext_rgf 4k */
+	{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
+	/* mac_ext_rgf 2256b */
+	{0x88c000, 0x88c8d0, 0x88c000, "mac_rgf_ext", true},
+	/* ext USER RGF 4k */
+	{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true},
+	/* SEC PKA 16k */
+	{0x890000, 0x894000, 0x890000, "sec_pka", true},
+	/* SEC KDF RGF 3096b */
+	{0x898000, 0x898c18, 0x898000, "sec_kdf_rgf", true},
+	/* SEC MAIN 2124b */
+	{0x89a000, 0x89a84c, 0x89a000, "sec_main", true},
+	/* OTP 4k */
+	{0x8a0000, 0x8a1000, 0x8a0000, "otp", true},
+	/* DMA EXT RGF 64k */
+	{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true},
+	/* DUM USER RGF 528b */
+	{0x8c0000, 0x8c0210, 0x8c0000, "dum_user_rgf", true},
+	/* DMA OFU 296b */
+	{0x8c2000, 0x8c2128, 0x8c2000, "dma_ofu", true},
+	/* ucode debug 4k */
+	{0x8c3000, 0x8c4000, 0x8c3000, "ucode_debug", true},
+	/* upper area 1536k */
+	{0x900000, 0xa80000, 0x900000, "upper", true},
+	/* UCODE areas - accessible by debugfs blobs but not by
+	 * wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
+	 */
+	/* ucode code RAM 256k */
+	{0x000000, 0x040000, 0xa38000, "uc_code", false},
+	/* ucode data RAM 32k */
+	{0x800000, 0x808000, 0xa78000, "uc_data", false},
+};
+
 struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
 
 struct blink_on_off_time led_blink_time[] = {