skd: Fix endianness annotations

Ensure that sparse does not report any warnings when building the
skd driver with sparse verification enabled (C=1 or C=2).

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drivers/block/skd_main.c

@@ -512,7 +512,7 @@ static void skd_request_fn(struct request_queue *q)
 	u32 lba;
 	u32 count;
 	int data_dir;
-	u64 be_dmaa;
+	__be64 be_dmaa;
 	u64 cmdctxt;
 	u32 timo_slot;
 	void *cmd_ptr;
@@ -645,7 +645,7 @@ static void skd_request_fn(struct request_queue *q)
 		cmd_ptr = &skmsg->msg_buf[skmsg->length];
 		memset(cmd_ptr, 0, 32);
 
-		be_dmaa = cpu_to_be64((u64)skreq->sksg_dma_address);
+		be_dmaa = cpu_to_be64(skreq->sksg_dma_address);
 		cmdctxt = skreq->id + SKD_ID_INCR;
 
 		scsi_req = cmd_ptr;
@@ -2402,9 +2402,7 @@ static void skd_do_inq_page_00(struct skd_device *skdev,
 
 		/* SCSI byte order increment of num_returned_bytes by 1 */
 		skcomp->num_returned_bytes =
-			be32_to_cpu(skcomp->num_returned_bytes) + 1;
-		skcomp->num_returned_bytes =
-			be32_to_cpu(skcomp->num_returned_bytes);
+			cpu_to_be32(be32_to_cpu(skcomp->num_returned_bytes) + 1);
 	}
 
 	/* update page length field to reflect the driver's page too */
@@ -2502,7 +2500,7 @@ static void skd_do_inq_page_da(struct skd_device *skdev,
 	memcpy(buf, &inq, min_t(unsigned, max_bytes, sizeof(inq)));
 
 	skcomp->num_returned_bytes =
-		be32_to_cpu(min_t(uint16_t, max_bytes, sizeof(inq)));
+		cpu_to_be32(min_t(uint16_t, max_bytes, sizeof(inq)));
 }
 
 static void skd_do_driver_inq(struct skd_device *skdev,
@@ -4674,7 +4672,7 @@ static void skd_pci_remove(struct pci_dev *pdev)
 
 	for (i = 0; i < SKD_MAX_BARS; i++)
 		if (skdev->mem_map[i])
-			iounmap((u32 *)skdev->mem_map[i]);
+			iounmap(skdev->mem_map[i]);
 
 	if (skdev->pcie_error_reporting_is_enabled)
 		pci_disable_pcie_error_reporting(pdev);
@@ -4705,7 +4703,7 @@ static int skd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	for (i = 0; i < SKD_MAX_BARS; i++)
 		if (skdev->mem_map[i])
-			iounmap((u32 *)skdev->mem_map[i]);
+			iounmap(skdev->mem_map[i]);
 
 	if (skdev->pcie_error_reporting_is_enabled)
 		pci_disable_pcie_error_reporting(pdev);

drivers/block/skd_s1120.h

@@ -248,7 +248,7 @@ struct fit_msg_hdr {
  *  20-23 of the FIT_MTD_FITFW_INIT response.
  */
 struct fit_completion_entry_v1 {
-	uint32_t	num_returned_bytes;
+	__be32		num_returned_bytes;
 	uint16_t	tag;
 	uint8_t		status;  /* SCSI status */
 	uint8_t		cycle;
@@ -290,11 +290,11 @@ struct fit_comp_error_info {
  * Version one has the last 32 bits sg_list_len_bytes;
  */
 struct skd_command_header {
-	uint64_t	sg_list_dma_address;
+	__be64		sg_list_dma_address;
 	uint16_t	tag;
 	uint8_t		attribute;
 	uint8_t		add_cdb_len;     /* In 32 bit words */
-	uint32_t	sg_list_len_bytes;
+	__be32		sg_list_len_bytes;
 };
 
 struct skd_scsi_request {
@@ -307,16 +307,16 @@ struct driver_inquiry_data {
 	uint8_t		peripheral_device_type:5;
 	uint8_t		qualifier:3;
 	uint8_t		page_code;
-	uint16_t	page_length;
-	uint16_t	pcie_bus_number;
+	__be16		page_length;
+	__be16		pcie_bus_number;
 	uint8_t		pcie_device_number;
 	uint8_t		pcie_function_number;
 	uint8_t		pcie_link_speed;
 	uint8_t		pcie_link_lanes;
-	uint16_t	pcie_vendor_id;
-	uint16_t	pcie_device_id;
-	uint16_t	pcie_subsystem_vendor_id;
-	uint16_t	pcie_subsystem_device_id;
+	__be16		pcie_vendor_id;
+	__be16		pcie_device_id;
+	__be16		pcie_subsystem_vendor_id;
+	__be16		pcie_subsystem_device_id;
 	uint8_t		reserved1[2];
 	uint8_t		reserved2[3];
 	uint8_t		driver_version_length;