drm/i915: Add 180 degree primary plane rotation support

Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.

v2: Calculating linear/tiled offsets based on pipe source width and
height. Added 180 degree rotation support in ironlake_update_plane.

v3: Checking if CRTC is active before issueing update_plane. Added
wait for vblank to make sure we dont overtake page flips. Disabling
FBC since it does not work with rotated planes.

v4: Updated rotation checks for pending flips, fbc disable. Creating
rotation property only for Gen4 onwards. Property resetting as part
of lastclose.

v5: Resetting property in i915_driver_lastclose properly for planes
and crtcs. Fixed linear offset calculation that was off by 1 w.r.t
width in i9xx_update_plane and ironlake_update_plane. Removed tab
based indentation and unnecessary braces in intel_crtc_set_property
and intel_update_fbc. FBC and flip related checks should be done only
for valid crtcs.

v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property
and positioning the disable code in intel_update_fbc.

v7: In case rotation property on inactive crtc is updated, we return
successfully printing debug log as crtc is inactive and only property change
is preserved.

v8: update_plane is changed to update_primary_plane, crtc->fb is changed to
crtc->primary->fb  and return value of update_primary_plane is ignored.

v9: added rotation property to primary plane instead of crtc. Removing reset
of rotation property from lastclose. rotation_property is moved to
drm_mode_config, so drm layer will take care of resetting. Adding updation of
fbc when rotation is set to 0. Allowing rotation only if value is
different than old one.

v10: Calling intel_primary_plane_setplane instead of update_primary_plane in
set_property(Daniel).

v11: Using same set_property function for both primary and sprite, Adding
primary plane specific code in the same function (Matt).

v12: Removing disabling/ enabling of fbc from set_property because it is done
from intel_pipe_set_base. Other formatting

v13: we need to call disable_fbc before changing the rotation to 180,
disable_fbc from intel_pipe_set_base gets called very late, that will
be used to re-enable fbc if rotation is set to 0 (Ville).

Testcase: igt/kms_rotation_crc

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
[danvet: Add FIXME to explain why we need the open-coded update_fbc
hunk to disable fbc when rotated 180 degree. And make checkpatch
happier.]
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -4214,6 +4214,7 @@ enum punit_power_well {
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_ROTATE_180         (1<<15)
 #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
 #define   DISPPLANE_TILED			(1<<10)
 #define _DSPAADDR				0x70184

drivers/gpu/drm/i915/intel_display.c

@@ -2378,6 +2378,9 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg = DSPCNTR(plane);
+	int pixel_size;
+
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 
 	if (!intel_crtc->primary_enabled) {
 		I915_WRITE(reg, 0);
@@ -2444,8 +2447,6 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 	if (IS_G4X(dev))
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -2458,6 +2459,21 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 		intel_crtc->dspaddr_offset = linear_offset;
 	}
 
+	if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		x += (intel_crtc->config.pipe_src_w - 1);
+		y += (intel_crtc->config.pipe_src_h - 1);
+
+		/* Finding the last pixel of the last line of the display
+		data and adding to linear_offset*/
+		linear_offset +=
+			(intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+			(intel_crtc->config.pipe_src_w - 1) * pixel_size;
+	}
+
+	I915_WRITE(reg, dspcntr);
+
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
 		      fb->pitches[0]);
@@ -2484,6 +2500,9 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg = DSPCNTR(plane);
+	int pixel_size;
+
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 
 	if (!intel_crtc->primary_enabled) {
 		I915_WRITE(reg, 0);
@@ -2532,14 +2551,28 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 	if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 	intel_crtc->dspaddr_offset =
 		intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
 					       fb->bits_per_pixel / 8,
 					       fb->pitches[0]);
 	linear_offset -= intel_crtc->dspaddr_offset;
+	if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += (intel_crtc->config.pipe_src_w - 1);
+			y += (intel_crtc->config.pipe_src_h - 1);
+
+			/* Finding the last pixel of the last line of the display
+			data and adding to linear_offset*/
+			linear_offset +=
+				(intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+				(intel_crtc->config.pipe_src_w - 1) * pixel_size;
+		}
+	}
+
+	I915_WRITE(reg, dspcntr);
 
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
@@ -11562,6 +11595,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
 			     uint32_t src_w, uint32_t src_h)
 {
 	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
@@ -11674,6 +11708,24 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
 		mutex_unlock(&dev->struct_mutex);
 
 	} else {
+		if (intel_crtc && intel_crtc->active &&
+		    intel_crtc->primary_enabled) {
+			/*
+			 * FBC does not work on some platforms for rotated
+			 * planes, so disable it when rotation is not 0 and
+			 * update it when rotation is set back to 0.
+			 *
+			 * FIXME: This is redundant with the fbc update done in
+			 * the primary plane enable function except that that
+			 * one is done too late. We eventually need to unify
+			 * this.
+			 */
+			if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+			    dev_priv->fbc.plane == intel_crtc->plane &&
+			    intel_plane->rotation != BIT(DRM_ROTATE_0)) {
+				intel_disable_fbc(dev);
+			}
+		}
 		ret = intel_pipe_set_base(crtc, src.x1, src.y1, fb);
 		if (ret)
 			return ret;
@@ -11707,6 +11759,7 @@ static const struct drm_plane_funcs intel_primary_plane_funcs = {
 	.update_plane = intel_primary_plane_setplane,
 	.disable_plane = intel_primary_plane_disable,
 	.destroy = intel_plane_destroy,
+	.set_property = intel_plane_set_property
 };
 
 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
@@ -11724,6 +11777,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 	primary->max_downscale = 1;
 	primary->pipe = pipe;
 	primary->plane = pipe;
+	primary->rotation = BIT(DRM_ROTATE_0);
 	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
 		primary->plane = !pipe;
 
@@ -11739,6 +11793,19 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 				 &intel_primary_plane_funcs,
 				 intel_primary_formats, num_formats,
 				 DRM_PLANE_TYPE_PRIMARY);
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		if (!dev->mode_config.rotation_property)
+			dev->mode_config.rotation_property =
+				drm_mode_create_rotation_property(dev,
+							BIT(DRM_ROTATE_0) |
+							BIT(DRM_ROTATE_180));
+		if (dev->mode_config.rotation_property)
+			drm_object_attach_property(&primary->base.base,
+				dev->mode_config.rotation_property,
+				primary->rotation);
+	}
+
 	return &primary->base;
 }
 

drivers/gpu/drm/i915/intel_drv.h

@@ -1093,6 +1093,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
 int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
 			       enum plane plane);
+int intel_plane_set_property(struct drm_plane *plane,
+			     struct drm_property *prop,
+			     uint64_t val);
 int intel_plane_restore(struct drm_plane *plane);
 void intel_plane_disable(struct drm_plane *plane);
 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,

drivers/gpu/drm/i915/intel_pm.c

@@ -581,6 +581,12 @@ void intel_update_fbc(struct drm_device *dev)
 			DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
 		goto out_disable;
 	}
+	if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+	    to_intel_plane(crtc->primary)->rotation != BIT(DRM_ROTATE_0)) {
+		if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE))
+			DRM_DEBUG_KMS("Rotation unsupported, disabling\n");
+		goto out_disable;
+	}
 
 	/* If the kernel debugger is active, always disable compression */
 	if (in_dbg_master())

drivers/gpu/drm/i915/intel_sprite.c

@@ -1218,9 +1218,9 @@ out_unlock:
 	return ret;
 }
 
-static int intel_plane_set_property(struct drm_plane *plane,
-				    struct drm_property *prop,
-				    uint64_t val)
+int intel_plane_set_property(struct drm_plane *plane,
+			     struct drm_property *prop,
+			     uint64_t val)
 {
 	struct drm_device *dev = plane->dev;
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1249,7 +1249,7 @@ int intel_plane_restore(struct drm_plane *plane)
 	if (!plane->crtc || !plane->fb)
 		return 0;
 
-	return intel_update_plane(plane, plane->crtc, plane->fb,
+	return plane->funcs->update_plane(plane, plane->crtc, plane->fb,
 				  intel_plane->crtc_x, intel_plane->crtc_y,
 				  intel_plane->crtc_w, intel_plane->crtc_h,
 				  intel_plane->src_x, intel_plane->src_y,