Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux into irq/core

Pull irqchip core changes for v4.9 from Jason Cooper

 - jcore: Add AIC driver
 - mips-gic: Use for_each_set_bit
 - mvebu: Add PIC driver

Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt

@@ -0,0 +1,26 @@
+J-Core Advanced Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
+  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
+  the "aic2" core with 64 interrupts.
+
+- reg: Memory region(s) for configuration. For SMP, there should be one
+  region per cpu, indexed by the sequential, zero-based hardware cpu
+  number.
+
+- interrupt-controller: Identifies the node as an interrupt controller
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+
+Example:
+
+aic: interrupt-controller@200 {
+	compatible = "jcore,aic2";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};

Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt

@@ -0,0 +1,25 @@
+Marvell Armada 7K/8K PIC Interrupt controller
+---------------------------------------------
+
+This is the Device Tree binding for the PIC, a secondary interrupt
+controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
+typically connected to the GIC as the primary interrupt controller.
+
+Required properties:
+- compatible: should be "marvell,armada-8k-pic"
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: the number of cells to define interrupts on this
+  controller. Should be 1
+- reg: the register area for the PIC interrupt controller
+- interrupts: the interrupt to the primary interrupt controller,
+  typically the GIC
+
+Example:
+
+	pic: interrupt-controller@3f0100 {
+		compatible = "marvell,armada-8k-pic";
+		reg = <0x3f0100 0x10>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};

Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt

@@ -31,7 +31,7 @@ Required properties:
 Example:
 
 	odmi: odmi@300000 {
-		compatible = "marvell,ap806-odm-controller",
+		compatible = "marvell,ap806-odmi-controller",
 			     "marvell,odmi-controller";
 		interrupt-controller;
 		msi-controller;

arch/arm64/Kconfig.platforms

@@ -93,6 +93,7 @@ config ARCH_MVEBU
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
 	select MVEBU_ODMI
+	select MVEBU_PIC
 	help
 	  This enables support for Marvell EBU familly, including:
 	   - Armada 3700 SoC Family

drivers/irqchip/Kconfig

@@ -157,6 +157,13 @@ config PIC32_EVIC
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
+config JCORE_AIC
+	bool "J-Core integrated AIC"
+	depends on OF && (SUPERH || COMPILE_TEST)
+	select IRQ_DOMAIN
+	help
+	  Support for the J-Core integrated AIC.
+
 config RENESAS_INTC_IRQPIN
 	bool
 	select IRQ_DOMAIN
@@ -252,6 +259,9 @@ config IRQ_MXS
 config MVEBU_ODMI
 	bool
 
+config MVEBU_PIC
+	bool
+
 config LS_SCFG_MSI
 	def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
 	depends on PCI && PCI_MSI

drivers/irqchip/Makefile

@@ -40,6 +40,7 @@ obj-$(CONFIG_I8259)			+= irq-i8259.o
 obj-$(CONFIG_IMGPDC_IRQ)		+= irq-imgpdc.o
 obj-$(CONFIG_IRQ_MIPS_CPU)		+= irq-mips-cpu.o
 obj-$(CONFIG_SIRF_IRQ)			+= irq-sirfsoc.o
+obj-$(CONFIG_JCORE_AIC)			+= irq-jcore-aic.o
 obj-$(CONFIG_RENESAS_INTC_IRQPIN)	+= irq-renesas-intc-irqpin.o
 obj-$(CONFIG_RENESAS_IRQC)		+= irq-renesas-irqc.o
 obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
@@ -68,6 +69,7 @@ obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
+obj-$(CONFIG_MVEBU_PIC)			+= irq-mvebu-pic.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
 obj-$(CONFIG_ARCH_ASPEED)		+= irq-aspeed-vic.o

drivers/irqchip/irq-jcore-aic.c

@@ -0,0 +1,95 @@
+/*
+ * J-Core SoC AIC driver
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define JCORE_AIC_MAX_HWIRQ	127
+#define JCORE_AIC1_MIN_HWIRQ	16
+#define JCORE_AIC2_MIN_HWIRQ	64
+
+#define JCORE_AIC1_INTPRI_REG	8
+
+static struct irq_chip jcore_aic;
+
+static int jcore_aic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	struct irq_chip *aic = d->host_data;
+
+	irq_set_chip_and_handler(irq, aic, handle_simple_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops jcore_aic_irqdomain_ops = {
+	.map = jcore_aic_irqdomain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void noop(struct irq_data *data)
+{
+}
+
+static int __init aic_irq_of_init(struct device_node *node,
+				  struct device_node *parent)
+{
+	unsigned min_irq = JCORE_AIC2_MIN_HWIRQ;
+	unsigned dom_sz = JCORE_AIC_MAX_HWIRQ+1;
+	struct irq_domain *domain;
+
+	pr_info("Initializing J-Core AIC\n");
+
+	/* AIC1 needs priority initialization to receive interrupts. */
+	if (of_device_is_compatible(node, "jcore,aic1")) {
+		unsigned cpu;
+
+		for_each_present_cpu(cpu) {
+			void __iomem *base = of_iomap(node, cpu);
+
+			if (!base) {
+				pr_err("Unable to map AIC for cpu %u\n", cpu);
+				return -ENOMEM;
+			}
+			__raw_writel(0xffffffff, base + JCORE_AIC1_INTPRI_REG);
+			iounmap(base);
+		}
+		min_irq = JCORE_AIC1_MIN_HWIRQ;
+	}
+
+	/*
+	 * The irq chip framework requires either mask/unmask or enable/disable
+	 * function pointers to be provided, but the hardware does not have any
+	 * such mechanism; the only interrupt masking is at the cpu level and
+	 * it affects all interrupts. We provide dummy mask/unmask. The hardware
+	 * handles all interrupt control and clears pending status when the cpu
+	 * accepts the interrupt.
+	 */
+	jcore_aic.irq_mask = noop;
+	jcore_aic.irq_unmask = noop;
+	jcore_aic.name = "AIC";
+
+	domain = irq_domain_add_linear(node, dom_sz, &jcore_aic_irqdomain_ops,
+				       &jcore_aic);
+	if (!domain)
+		return -ENOMEM;
+	irq_create_strict_mappings(domain, min_irq, min_irq, dom_sz - min_irq);
+
+	return 0;
+}
+
+IRQCHIP_DECLARE(jcore_aic2, "jcore,aic2", aic_irq_of_init);
+IRQCHIP_DECLARE(jcore_aic1, "jcore,aic1", aic_irq_of_init);

drivers/irqchip/irq-keystone.c

@@ -109,7 +109,7 @@ static void keystone_irq_handler(struct irq_desc *desc)
 			dev_dbg(kirq->dev, "dispatch bit %d, virq %d\n",
 				src, virq);
 			if (!virq)
-				dev_warn(kirq->dev, "sporious irq detected hwirq %d, virq %d\n",
+				dev_warn(kirq->dev, "spurious irq detected hwirq %d, virq %d\n",
 					 src, virq);
 			generic_handle_irq(virq);
 		}

drivers/irqchip/irq-mips-gic.c

@@ -371,18 +371,13 @@ static void gic_handle_shared_int(bool chained)
 	bitmap_and(pending, pending, intrmask, gic_shared_intrs);
 	bitmap_and(pending, pending, pcpu_mask, gic_shared_intrs);
 
-	intr = find_first_bit(pending, gic_shared_intrs);
-	while (intr != gic_shared_intrs) {
+	for_each_set_bit(intr, pending, gic_shared_intrs) {
 		virq = irq_linear_revmap(gic_irq_domain,
 					 GIC_SHARED_TO_HWIRQ(intr));
 		if (chained)
 			generic_handle_irq(virq);
 		else
 			do_IRQ(virq);
-
-		/* go to next pending bit */
-		bitmap_clear(pending, intr, 1);
-		intr = find_first_bit(pending, gic_shared_intrs);
 	}
 }
 

drivers/irqchip/irq-mvebu-pic.c

@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2016 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#define PIC_CAUSE	       0x0
+#define PIC_MASK	       0x4
+
+#define PIC_MAX_IRQS		32
+#define PIC_MAX_IRQ_MASK	((1UL << PIC_MAX_IRQS) - 1)
+
+struct mvebu_pic {
+	void __iomem *base;
+	u32 parent_irq;
+	struct irq_domain *domain;
+	struct irq_chip irq_chip;
+};
+
+static void mvebu_pic_reset(struct mvebu_pic *pic)
+{
+	/* ACK and mask all interrupts */
+	writel(0, pic->base + PIC_MASK);
+	writel(PIC_MAX_IRQ_MASK, pic->base + PIC_CAUSE);
+}
+
+static void mvebu_pic_eoi_irq(struct irq_data *d)
+{
+	struct mvebu_pic *pic = irq_data_get_irq_chip_data(d);
+
+	writel(1 << d->hwirq, pic->base + PIC_CAUSE);
+}
+
+static void mvebu_pic_mask_irq(struct irq_data *d)
+{
+	struct mvebu_pic *pic = irq_data_get_irq_chip_data(d);
+	u32 reg;
+
+	reg =  readl(pic->base + PIC_MASK);
+	reg |= (1 << d->hwirq);
+	writel(reg, pic->base + PIC_MASK);
+}
+
+static void mvebu_pic_unmask_irq(struct irq_data *d)
+{
+	struct mvebu_pic *pic = irq_data_get_irq_chip_data(d);
+	u32 reg;
+
+	reg = readl(pic->base + PIC_MASK);
+	reg &= ~(1 << d->hwirq);
+	writel(reg, pic->base + PIC_MASK);
+}
+
+static int mvebu_pic_irq_map(struct irq_domain *domain, unsigned int virq,
+			     irq_hw_number_t hwirq)
+{
+	struct mvebu_pic *pic = domain->host_data;
+
+	irq_set_percpu_devid(virq);
+	irq_set_chip_data(virq, pic);
+	irq_set_chip_and_handler(virq, &pic->irq_chip,
+				 handle_percpu_devid_irq);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_probe(virq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mvebu_pic_domain_ops = {
+	.map = mvebu_pic_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void mvebu_pic_handle_cascade_irq(struct irq_desc *desc)
+{
+	struct mvebu_pic *pic = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned long irqmap, irqn;
+	unsigned int cascade_irq;
+
+	irqmap = readl_relaxed(pic->base + PIC_CAUSE);
+	chained_irq_enter(chip, desc);
+
+	for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
+		cascade_irq = irq_find_mapping(pic->domain, irqn);
+		generic_handle_irq(cascade_irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void mvebu_pic_enable_percpu_irq(void *data)
+{
+	struct mvebu_pic *pic = data;
+
+	mvebu_pic_reset(pic);
+	enable_percpu_irq(pic->parent_irq, IRQ_TYPE_NONE);
+}
+
+static void mvebu_pic_disable_percpu_irq(void *data)
+{
+	struct mvebu_pic *pic = data;
+
+	disable_percpu_irq(pic->parent_irq);
+}
+
+static int mvebu_pic_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct mvebu_pic *pic;
+	struct irq_chip *irq_chip;
+	struct resource *res;
+
+	pic = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pic), GFP_KERNEL);
+	if (!pic)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pic->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pic->base))
+		return PTR_ERR(pic->base);
+
+	irq_chip = &pic->irq_chip;
+	irq_chip->name = dev_name(&pdev->dev);
+	irq_chip->irq_mask = mvebu_pic_mask_irq;
+	irq_chip->irq_unmask = mvebu_pic_unmask_irq;
+	irq_chip->irq_eoi = mvebu_pic_eoi_irq;
+
+	pic->parent_irq = irq_of_parse_and_map(node, 0);
+	if (pic->parent_irq <= 0) {
+		dev_err(&pdev->dev, "Failed to parse parent interrupt\n");
+		return -EINVAL;
+	}
+
+	pic->domain = irq_domain_add_linear(node, PIC_MAX_IRQS,
+					    &mvebu_pic_domain_ops, pic);
+	if (!pic->domain) {
+		dev_err(&pdev->dev, "Failed to allocate irq domain\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(pic->parent_irq, mvebu_pic_handle_cascade_irq);
+	irq_set_handler_data(pic->parent_irq, pic);
+
+	on_each_cpu(mvebu_pic_enable_percpu_irq, pic, 1);
+
+	platform_set_drvdata(pdev, pic);
+
+	return 0;
+}
+
+static int mvebu_pic_remove(struct platform_device *pdev)
+{
+	struct mvebu_pic *pic = platform_get_drvdata(pdev);
+
+	on_each_cpu(mvebu_pic_disable_percpu_irq, pic, 1);
+	irq_domain_remove(pic->domain);
+
+	return 0;
+}
+
+static const struct of_device_id mvebu_pic_of_match[] = {
+	{ .compatible = "marvell,armada-8k-pic", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mvebu_pic_of_match);
+
+static struct platform_driver mvebu_pic_driver = {
+	.probe  = mvebu_pic_probe,
+	.remove = mvebu_pic_remove,
+	.driver = {
+		.name = "mvebu-pic",
+		.of_match_table = mvebu_pic_of_match,
+	},
+};
+module_platform_driver(mvebu_pic_driver);
+
+MODULE_AUTHOR("Yehuda Yitschak <yehuday@marvell.com>");
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:mvebu_pic");
+