Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:

 - A relatively large patch restores booting on i.MX platforms that
   failed to boot after a cleanup was merged for v4.10.

 - A quirk for USB needs to be enabled on the STi platform

 - On the Meson platform, we saw memory corruption with part of the
   memory used by the secure monitor, so we have to stay out of that
   area.

 - The same platform also has a problem with ethernet under load, which
   is fixed by disabling EEE negotiation.

 - imx6dl has an incorrect pin configuration, which prevents SPI from
   working.

 - Two maintainers have lost their access to their email addresses, so
   we should update the MAINTAINERS file before the release

 - Renaming one of the orion5x linkstation models to help simplify the
   debian install.

 - A couple of fixes for build warnings that were introduced during
   v4.10-rc.

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
  MAINTAINERS: socfpga: update email for Dinh Nguyen
  ARM: orion5x: fix Makefile for linkstation-lschl.dtb
  ARM: dts: orion5x-lschl: More consistent naming on linkstation series
  ARM: dts: orion5x-lschl: Fix model name
  MAINTAINERS: change email address from atmel to microchip
  MAINTAINERS: at91: change email address
  ARM64: dts: meson-gx: Add firmware reserved memory zones
  ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage
  ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
  ARM: dts: imx: Pass 'chosen' and 'memory' nodes
  ARM: dts: imx6dl: fix GPIO4 range
  ARM: imx: hide unused variable in #ifdef

MAINTAINERS

@@ -1091,7 +1091,7 @@ F:	arch/arm/boot/dts/aspeed-*
 F:	drivers/*/*aspeed*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
 M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1773,7 +1773,7 @@ F:	drivers/soc/renesas/
 F:	include/linux/soc/renesas/
 
 ARM/SOCFPGA ARCHITECTURE
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
@@ -1783,7 +1783,7 @@ W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
 ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
-M:	Dinh Nguyen <dinguyen@opensource.altera.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
@@ -2175,56 +2175,56 @@ F:	include/linux/atm*
 F:	include/uapi/linux/atm*
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 
 ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/power/reset/at91-sama5d2_shdwc.c
 
 ATMEL SAMA5D2 ADC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 F:	drivers/iio/adc/at91-sama5d2_adc.c
 
 ATMEL Audio ALSA driver
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/atmel
 
 ATMEL XDMA DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	dmaengine@vger.kernel.org
 S:	Supported
 F:	drivers/dma/at_xdmac.c
 
 ATMEL I2C DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
 F:	drivers/i2c/busses/i2c-at91.c
 
 ATMEL ISI DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-media@vger.kernel.org
 S:	Supported
 F:	drivers/media/platform/soc_camera/atmel-isi.c
 F:	include/media/atmel-isi.h
 
 ATMEL LCDFB DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/net/ethernet/cadence/
 
@@ -2236,32 +2236,32 @@ S:	Supported
 F:	drivers/mtd/nand/atmel_nand*
 
 ATMEL SDMMC DRIVER
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-mmc@vger.kernel.org
 S:	Supported
 F:	drivers/mmc/host/sdhci-of-at91.c
 
 ATMEL SPI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 S:	Supported
 F:	drivers/spi/spi-atmel.*
 
 ATMEL SSC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel-ssc.c
 F:	include/linux/atmel-ssc.h
 
 ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/misc/atmel_tclib.c
 F:	drivers/clocksource/tcb_clksrc.c
 
 ATMEL USBA UDC DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/udc/atmel_usba_udc.*
@@ -9736,7 +9736,7 @@ S:	Maintained
 F:	drivers/pinctrl/pinctrl-at91.*
 
 PIN CONTROLLER - ATMEL AT91 PIO4
-M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-gpio@vger.kernel.org
 S:	Supported

arch/arm/boot/dts/Makefile

@@ -617,7 +617,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-linkstation-lsgl.dtb \
 	orion5x-linkstation-lswtgl.dtb \
-	orion5x-lschl.dtb \
+	orion5x-linkstation-lschl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-netgear-wnr854t.dtb \

arch/arm/boot/dts/imx1.dtsi

@@ -18,6 +18,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/imx23.dtsi

@@ -16,6 +16,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio0;

arch/arm/boot/dts/imx25.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx27.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx28.dtsi

@@ -17,6 +17,14 @@
 	#size-cells = <1>;
 
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &mac0;

arch/arm/boot/dts/imx31.dtsi

@@ -12,6 +12,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		serial0 = &uart1;

arch/arm/boot/dts/imx35.dtsi

@@ -13,6 +13,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx50.dtsi

@@ -17,6 +17,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx51.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx53.dtsi

@@ -19,6 +19,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6dl.dtsi

@@ -137,7 +137,7 @@
 &gpio4 {
 	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
 		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
-		      <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
 		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
 		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -16,6 +16,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6sl.dtsi

@@ -14,6 +14,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec;

arch/arm/boot/dts/imx6sx.dtsi

@@ -15,6 +15,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		can0 = &flexcan1;

arch/arm/boot/dts/imx6ul.dtsi

@@ -15,6 +15,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		ethernet0 = &fec1;

arch/arm/boot/dts/imx7s.dtsi

@@ -50,6 +50,14 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	aliases {
 		gpio0 = &gpio1;

arch/arm/boot/dts/orion5x-lschl.dts → arch/arm/boot/dts/orion5x-linkstation-lschl.dts

@@ -2,7 +2,7 @@
  * Device Tree file for Buffalo Linkstation LS-CHLv3
  *
  * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
- * Copyright (C) 2015, 2016
+ * Copyright (C) 2015-2017
  * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
@@ -52,7 +52,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Buffalo Linkstation Live v3 (LS-CHL)";
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
 	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory { /* 128 MB */

arch/arm/boot/dts/stih407-family.dtsi

@@ -680,6 +680,7 @@
 				phy-names	= "usb2-phy", "usb3-phy";
 				phys		= <&usb2_picophy0>,
 						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
 			};
 		};
 

arch/arm/configs/ezx_defconfig

@@ -64,8 +64,8 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/configs/imote2_defconfig

@@ -56,8 +56,8 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/mach-imx/mmdc.c

@@ -60,7 +60,6 @@
 
 #define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
 
-static enum cpuhp_state cpuhp_mmdc_state;
 static int ddr_type;
 
 struct fsl_mmdc_devtype_data {
@@ -82,6 +81,7 @@ static const struct of_device_id imx_mmdc_dt_ids[] = {
 
 #ifdef CONFIG_PERF_EVENTS
 
+static enum cpuhp_state cpuhp_mmdc_state;
 static DEFINE_IDA(mmdc_ida);
 
 PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -55,6 +55,24 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -151,6 +151,18 @@
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
 };
 
 &ir {