iio:imu:mpu6050: icm20608 initial support

Introduce support for Invense ICM20608 IMU, a 6-axis motion tracking device
that combines a 3-axis gyroscope and a 3-axis accelerometer:
http://www.invensense.com/products/motion-tracking/6-axis/icm-20608-2

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/imu/inv_mpu6050/Kconfig

@@ -13,8 +13,8 @@ config INV_MPU6050_I2C
 	select INV_MPU6050_IIO
 	select REGMAP_I2C
 	help
-	  This driver supports the Invensense MPU6050/6500/9150 motion tracking
-	  devices over I2C.
+	  This driver supports the Invensense MPU6050/6500/9150 and ICM20608
+	  motion tracking devices over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
 
@@ -24,7 +24,7 @@ config INV_MPU6050_SPI
 	select INV_MPU6050_IIO
 	select REGMAP_SPI
 	help
-	  This driver supports the Invensense MPU6000/6500/9150 motion tracking
-	  devices over SPI.
+	  This driver supports the Invensense MPU6050/6500/9150 and ICM20608
+	  motion tracking devices over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -113,6 +113,12 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.reg = &reg_set_6050,
 		.config = &chip_config_6050,
 	},
+	{
+		.whoami = INV_ICM20608_WHOAMI_VALUE,
+		.name = "ICM20608",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6050,
+	},
 };
 
 int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)

drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c

@@ -170,6 +170,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
 	{"mpu6050", INV_MPU6050},
 	{"mpu6500", INV_MPU6500},
 	{"mpu9150", INV_MPU9150},
+	{"icm20608", INV_ICM20608},
 	{}
 };
 

drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h

@@ -70,6 +70,7 @@ enum inv_devices {
 	INV_MPU6500,
 	INV_MPU6000,
 	INV_MPU9150,
+	INV_ICM20608,
 	INV_NUM_PARTS
 };
 
@@ -225,6 +226,7 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_WHOAMI_VALUE		0x68
 #define INV_MPU6500_WHOAMI_VALUE		0x70
 #define INV_MPU9150_WHOAMI_VALUE		0x68
+#define INV_ICM20608_WHOAMI_VALUE		0xAF
 
 /* scan element definition */
 enum inv_mpu6050_scan {

drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c

@@ -82,6 +82,7 @@ static const struct spi_device_id inv_mpu_id[] = {
 	{"mpu6000", INV_MPU6000},
 	{"mpu6500", INV_MPU6500},
 	{"mpu9150", INV_MPU9150},
+	{"icm20608", INV_ICM20608},
 	{}
 };