Merge tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt

ARM: sirf: dts update for 3.14

From Barry Song:
some missed dt nodes or props for sirf dts for 3.14.
Among them:
 - add lost clocks for cphifbg
 - add lost bus_width, clock and status for sdhci
 - add clock, frequence-voltage table for CPU0
 - add lost minigpsrtc device node
 - add lost usp1_uart_nostreamctrl pin group for atlas6
 - add pin group for USP0 with only RX or TX frame sync

* tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg

Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/boot/dts/atlas6.dtsi

@@ -27,6 +27,15 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				600000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
 		};
 	};
 
@@ -69,6 +78,7 @@
 			cphifbg@88030000 {
 				compatible = "sirf,prima2-cphifbg";
 				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
 			};
 		};
 
@@ -546,6 +556,12 @@
                                                 sirf,function = "usp1";
                                         };
                                 };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
+                                                sirf,function = "usp1_uart_nostreamctrl";
+                                        };
+                                };
                                 usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
                                         usb0_upli_drvbus {
                                                 sirf,pins = "usb0_upli_drvbusgrp";
@@ -636,6 +652,7 @@
 					reg = <0x56100000 0x100000>;
 					interrupts = <38>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 36>;
 				};
 
@@ -645,6 +662,7 @@
 					reg = <0x56200000 0x100000>;
 					interrupts = <23>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 37>;
 				};
 
@@ -654,6 +672,7 @@
 					reg = <0x56300000 0x100000>;
 					interrupts = <23>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 37>;
 				};
 
@@ -663,6 +682,7 @@
 					reg = <0x56500000 0x100000>;
 					interrupts = <39>;
 					status = "disabled";
+					bus-width = <4>;
 					clocks = <&clks 38>;
 				};
 
@@ -697,6 +717,12 @@
 				interrupts = <52 53 54>;
 			};
 
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
 			pwrc@3000 {
 				compatible = "sirf,prima2-pwrc";
 				reg = <0x3000 0x1000>;

arch/arm/boot/dts/prima2.dtsi

@@ -29,6 +29,15 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				664000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
 		};
 	};
 
@@ -80,6 +89,7 @@
 			cphifbg@88030000 {
 				compatible = "sirf,prima2-cphifbg";
 				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
 			};
 		};
 
@@ -540,6 +550,18 @@
 							"usp0_uart_nostreamctrl";
                                         };
                                 };
+                                usp0_only_utfs_pins_a: usp0@2 {
+                                        usp0 {
+                                                sirf,pins = "usp0_only_utfs_grp";
+                                                sirf,function = "usp0_only_utfs";
+                                        };
+                                };
+                                usp0_only_urfs_pins_a: usp0@3 {
+                                        usp0 {
+                                                sirf,pins = "usp0_only_urfs_grp";
+                                                sirf,function = "usp0_only_urfs";
+                                        };
+                                };
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
@@ -648,6 +670,9 @@
 					compatible = "sirf,prima2-sdhc";
 					reg = <0x56000000 0x100000>;
 					interrupts = <38>;
+					status = "disabled";
+					bus-width = <8>;
+					clocks = <&clks 36>;
 				};
 
 				sd1: sdhci@56100000 {
@@ -655,6 +680,9 @@
 					compatible = "sirf,prima2-sdhc";
 					reg = <0x56100000 0x100000>;
 					interrupts = <38>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 36>;
 				};
 
 				sd2: sdhci@56200000 {
@@ -662,6 +690,8 @@
 					compatible = "sirf,prima2-sdhc";
 					reg = <0x56200000 0x100000>;
 					interrupts = <23>;
+					status = "disabled";
+					clocks = <&clks 37>;
 				};
 
 				sd3: sdhci@56300000 {
@@ -669,6 +699,8 @@
 					compatible = "sirf,prima2-sdhc";
 					reg = <0x56300000 0x100000>;
 					interrupts = <23>;
+					status = "disabled";
+					clocks = <&clks 37>;
 				};
 
 				sd4: sdhci@56400000 {
@@ -676,6 +708,8 @@
 					compatible = "sirf,prima2-sdhc";
 					reg = <0x56400000 0x100000>;
 					interrupts = <39>;
+					status = "disabled";
+					clocks = <&clks 38>;
 				};
 
 				sd5: sdhci@56500000 {
@@ -683,6 +717,7 @@
 					compatible = "sirf,prima2-sdhc";
 					reg = <0x56500000 0x100000>;
 					interrupts = <39>;
+					clocks = <&clks 38>;
 				};
 
 				pci-copy@57900000 {
@@ -716,6 +751,12 @@
 				interrupts = <52 53 54>;
 			};
 
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
 			pwrc@3000 {
 				compatible = "sirf,prima2-pwrc";
 				reg = <0x3000 0x1000>;