Merge tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

Merge "Samsung 2nd drivers for 3.16" from Kukjin Kim:

This is including fix exynos cpufreq driver compilation with
ARCH_MULTIPLATFORM. Even though this is a work around, this
is required for support exynos multiplatform for a while and
will be updated in near future.

This is based on tags/samsung-exynos.

* tag 'samsung-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: dts: Remove g2d_pd node for exynos5420
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/Kconfig

@@ -829,26 +829,6 @@ config ARCH_S5PV210
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
-config ARCH_EXYNOS
-	bool "Samsung EXYNOS"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_GIC
-	select COMMON_CLK_SAMSUNG
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	select SRAM
-	select USE_OF
-	help
-	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL

arch/arm/Kconfig.debug

@@ -625,6 +625,7 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -637,6 +638,7 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -649,6 +651,7 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -670,6 +673,33 @@ choice
 		  The uncompressor code port configuration is now handled
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
+	config DEBUG_S3C2410_UART0
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART1
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+	config DEBUG_S3C2410_UART2
+		depends on ARCH_S3C24XX
+		select DEBUG_S3C2410_UART
+		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
 	config DEBUG_SOCFPGA_UART
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART for low-level debug"
@@ -921,6 +951,13 @@ endchoice
 config DEBUG_EXYNOS_UART
 	bool
 
+config DEBUG_S3C2410_UART
+	bool
+	select DEBUG_S3C24XX_UART
+
+config DEBUG_S3C24XX_UART
+	bool
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -973,6 +1010,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6SL_UART
 	default "debug/msm.S" if DEBUG_MSM_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1029,6 +1067,12 @@ config DEBUG_UART_PHYS
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
+	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0x7c0003f8 if FOOTBRIDGE
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
@@ -1058,7 +1102,7 @@ config DEBUG_UART_PHYS
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1075,6 +1119,12 @@ config DEBUG_UART_VIRT
 	default 0xf2100000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
+	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
+				DEBUG_S3C2410_UART0)
+	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
+				DEBUG_S3C2410_UART1)
+	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
+				DEBUG_S3C2410_UART2)
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1116,7 +1166,7 @@ config DEBUG_UART_VIRT
 	default 0xff003000 if DEBUG_U300_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_UART_8250 || DEBUG_UART_PL01X
+		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"

arch/arm/boot/compressed/head.S

@@ -60,11 +60,6 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C24XX)
-		.macro loadsp, rb, tmp
-		mov	\rb, #0x50000000
-		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
-		.endm
 #else
 		.macro	loadsp,	rb, tmp
 		addruart \rb, \tmp

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -364,16 +364,4 @@
 			gpio-key,wakeup;
 		};
 	};
-
-	amba {
-		mdma1: mdma@11C10000 {
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
-			status = "disabled";
-		};
-	};
 };

arch/arm/boot/dts/exynos5420.dtsi

@@ -264,16 +264,6 @@
 		reg = <0x100440C0 0x20>;
 	};
 
-	mau_pd: power-domain@100440E0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440E0 0x20>;
-	};
-
-	g2d_pd: power-domain@10044100 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044100 0x20>;
-	};
-
 	msc_pd: power-domain@10044120 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044120 0x20>;
@@ -381,6 +371,13 @@
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in the kernel
+			 * for boards that run in secure mode, we are getting
+			 * imprecise external aborts causing the kernel to oops.
+			 */
+			status = "disabled";
 		};
 	};
 
@@ -775,6 +772,5 @@
 		interrupts = <0 112 0>;
 		clocks = <&clock 471>;
 		clock-names = "secss";
-		samsung,power-domain = <&g2d_pd>;
 	};
 };

arch/arm/configs/exynos_defconfig

@@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
 CONFIG_I2C_S3C2410=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set

arch/arm/include/debug/s3c24xx.S

@@ -0,0 +1,46 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_s3c.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, = CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, = CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_DEBUG_S3C2410_UART)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <debug/samsung.S>

arch/arm/mach-exynos/Kconfig

@@ -7,97 +7,102 @@
 
 # Configuration options for the EXYNOS4
 
+config ARCH_EXYNOS
+	bool "Samsung EXYNOS" if ARCH_MULTI_V7
+	select ARCH_HAS_BANDGAP
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_GIC
+	select COMMON_CLK_SAMSUNG
+	select HAVE_ARM_SCU if SMP
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select PINCTRL
+	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM_RUNTIME
+	select S5P_DEV_MFC
+	select SRAM
+	help
+	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
+
 if ARCH_EXYNOS
 
 menu "SAMSUNG EXYNOS SoCs Support"
 
+config ARCH_EXYNOS3
+	bool "SAMSUNG EXYNOS3"
+	select ARM_CPU_SUSPEND if PM
+	help
+	  Samsung EXYNOS3 (Crotex-A7) SoC based systems
+
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
 	default y
-	select ARM_AMBA
-	select CLKSRC_OF
+	select ARM_CPU_SUSPEND if PM_SLEEP
 	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
 	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
 	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
-	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM_RUNTIME
-	select S5P_DEV_MFC
 	help
-	  Samsung EXYNOS4 SoCs based systems
+	  Samsung EXYNOS4 (Cortex-A9) SoC based systems
 
 config ARCH_EXYNOS5
 	bool "SAMSUNG EXYNOS5"
-	select ARM_AMBA
-	select CLKSRC_OF
-	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
-	select PINCTRL
+	default y
 	help
-	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
+	  Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems
 
 comment "EXYNOS SoCs"
 
+config SOC_EXYNOS3250
+	bool "SAMSUNG EXYNOS3250"
+	default y
+	depends on ARCH_EXYNOS3
+
 config CPU_EXYNOS4210
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
-	select ARCH_HAS_BANDGAP
-	select ARM_CPU_SUSPEND if PM_SLEEP
-	select PINCTRL_EXYNOS
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4210 CPU support
 
 config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
-	select ARCH_HAS_BANDGAP
-	select PINCTRL_EXYNOS
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4212 SoC support
 
 config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y
 	depends on ARCH_EXYNOS4
-	select ARCH_HAS_BANDGAP
-	select PINCTRL_EXYNOS
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4412 SoC support
 
 config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
-	select ARCH_HAS_BANDGAP
-	select PINCTRL_EXYNOS
-	select PM_GENERIC_DOMAINS if PM_RUNTIME
-	select S5P_DEV_MFC
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS5250 SoC support
+
+config SOC_EXYNOS5260
+	bool "SAMSUNG EXYNOS5260"
+	default y
+	depends on ARCH_EXYNOS5
+
+config SOC_EXYNOS5410
+	bool "SAMSUNG EXYNOS5410"
+	default y
+	depends on ARCH_EXYNOS5
 
 config SOC_EXYNOS5420
 	bool "SAMSUNG EXYNOS5420"
 	default y
 	depends on ARCH_EXYNOS5
-	select PM_GENERIC_DOMAINS if PM_RUNTIME
-	help
-	  Enable EXYNOS5420 SoC support
 
 config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
@@ -108,6 +113,11 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
+config SOC_EXYNOS5800
+	bool "SAMSUNG EXYNOS5800"
+	default y
+	depends on SOC_EXYNOS5420
+
 endmenu
 
 config EXYNOS5420_MCPM

arch/arm/mach-exynos/Makefile

@@ -5,6 +5,8 @@
 #
 # Licensed under GPLv2
 
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+
 obj-y				:=
 obj-m				:=
 obj-n				:=
@@ -12,20 +14,15 @@ obj-				:=
 
 # Core
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
 
 obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o
-
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos-smc.o
-obj-$(CONFIG_ARCH_EXYNOS)	+= firmware.o
-
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 

arch/arm/mach-exynos/common.h

@@ -15,6 +15,102 @@
 #include <linux/reboot.h>
 #include <linux/of.h>
 
+#define EXYNOS3250_SOC_ID	0xE3472000
+#define EXYNOS3_SOC_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5410_SOC_ID	0xE5410000
+#define EXYNOS5420_SOC_ID	0xE5420000
+#define EXYNOS5440_SOC_ID	0xE5440000
+#define EXYNOS5800_SOC_ID	0xE5422000
+#define EXYNOS5_SOC_MASK	0xFFFFF000
+
+extern unsigned long samsung_cpu_id;
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
+
+#if defined(CONFIG_SOC_EXYNOS3250)
+# define soc_is_exynos3250()	is_samsung_exynos3250()
+#else
+# define soc_is_exynos3250()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250()	is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5410)
+# define soc_is_exynos5410()	is_samsung_exynos5410()
+#else
+# define soc_is_exynos5410()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+# define soc_is_exynos5420()	is_samsung_exynos5420()
+#else
+# define soc_is_exynos5420()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+# define soc_is_exynos5440()	is_samsung_exynos5440()
+#else
+# define soc_is_exynos5440()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5800)
+# define soc_is_exynos5800()	is_samsung_exynos5800()
+#else
+# define soc_is_exynos5800()	0
+#endif
+
+#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
+			  soc_is_exynos4412())
+#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
+			  soc_is_exynos5420() || soc_is_exynos5800())
+
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
 
 struct map_desc;
@@ -72,4 +168,7 @@ extern void exynos_cluster_power_up(int cluster);
 extern int  exynos_cluster_power_state(int cluster);
 extern void exynos_enter_aftr(void);
 
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+extern unsigned int samsung_rev(void);
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/exynos.c

@@ -26,8 +26,6 @@
 #include <asm/mach/map.h>
 #include <asm/memory.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "mfc.h"
 #include "regs-pmu.h"
@@ -248,17 +246,6 @@ void __init exynos_init_io(void)
 	exynos_map_io();
 }
 
-struct bus_type exynos_subsys = {
-	.name		= "exynos-core",
-	.dev_name	= "exynos-core",
-};
-
-static int __init exynos_core_init(void)
-{
-	return subsys_system_register(&exynos_subsys, NULL);
-}
-core_initcall(exynos_core_init);
-
 static int __init exynos4_l2x0_cache_init(void)
 {
 	int ret;
@@ -310,12 +297,15 @@ static void __init exynos_dt_machine_init(void)
 }
 
 static char const *exynos_dt_compat[] __initconst = {
+	"samsung,exynos3",
+	"samsung,exynos3250",
 	"samsung,exynos4",
 	"samsung,exynos4210",
 	"samsung,exynos4212",
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",
+	"samsung,exynos5260",
 	"samsung,exynos5420",
 	"samsung,exynos5440",
 	NULL

arch/arm/mach-exynos/firmware.c

@@ -29,6 +29,21 @@ static int exynos_do_idle(void)
 
 static int exynos_cpu_boot(int cpu)
 {
+	/*
+	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
+	 * because Exynos3250 removes WFE in secure mode.
+	 */
+	if (soc_is_exynos3250())
+		return 0;
+
+	/*
+	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
+	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
@@ -40,7 +55,10 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 	if (!sysram_ns_base_addr)
 		return -ENODEV;
 
-	boot_reg = sysram_ns_base_addr + 0x1c + 4*cpu;
+	boot_reg = sysram_ns_base_addr + 0x1c;
+
+	if (!soc_is_exynos4212() && !soc_is_exynos3250())
+		boot_reg += 4*cpu;
 
 	__raw_writel(boot_addr, boot_reg);
 	return 0;

arch/arm/mach-exynos/hotplug.c

@@ -19,61 +19,9 @@
 #include <asm/cp15.h>
 #include <asm/smp_plat.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
-static inline void cpu_enter_lowpower_a9(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void cpu_enter_lowpower_a15(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-
-	flush_cache_louis();
-
-	asm volatile(
-	/*
-	* Turn off coherency
-	*/
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	: "=&r" (v)
-	: "Ir" (0x40)
-	: "cc");
-
-	isb();
-	dsb();
-}
-
 static inline void cpu_leave_lowpower(void)
 {
 	unsigned int v;
@@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 void __ref exynos_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
-	int primary_part = 0;
 
-	/*
-	 * we're ready for shutdown now, so do it.
-	 * Exynos4 is A9 based while Exynos5 is A15; check the CPU part
-	 * number by reading the Main ID register and then perform the
-	 * appropriate sequence for entering low power.
-	 */
-	asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
-	if ((primary_part & 0xfff0) == 0xc0f0)
-		cpu_enter_lowpower_a15();
-	else
-		cpu_enter_lowpower_a9();
+	v7_exit_coherency_flush(louis);
 
 	platform_do_lowpower(cpu, &spurious);
 

arch/arm/mach-exynos/platsmp.c

@@ -27,8 +27,6 @@
 #include <asm/smp_scu.h>
 #include <asm/firmware.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 
@@ -72,7 +70,7 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 		return ERR_PTR(-ENODEV);
 	if (soc_is_exynos4412())
 		boot_reg += 4*cpu;
-	else if (soc_is_exynos5420())
+	else if (soc_is_exynos5420() || soc_is_exynos5800())
 		boot_reg += 4;
 	return boot_reg;
 }

arch/arm/mach-exynos/pm.c

@@ -27,7 +27,6 @@
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
-#include <plat/cpu.h>
 #include <plat/pm-common.h>
 #include <plat/pll.h>
 #include <plat/regs-srom.h>

arch/arm/mach-exynos/pmu.c

@@ -13,8 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/bug.h>
 
-#include <plat/cpu.h>
-
 #include "common.h"
 #include "regs-pmu.h"
 

arch/arm/mach-s3c24xx/Kconfig

@@ -28,7 +28,6 @@ config CPU_S3C2410
 	bool "SAMSUNG S3C2410"
 	default y
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2410
 	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
@@ -41,7 +40,6 @@ config CPU_S3C2410
 config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
@@ -51,7 +49,6 @@ config CPU_S3C2412
 config CPU_S3C2416
 	bool "SAMSUNG S3C2416/S3C2450"
 	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
 	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
@@ -61,7 +58,6 @@ config CPU_S3C2416
 config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
@@ -71,7 +67,6 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
@@ -86,7 +81,6 @@ config CPU_S3C244X
 config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
 	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
 	help
@@ -148,28 +142,6 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 	depends on ARM_S3C24XX_CPUFREQ

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -1,101 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <linux/serial_s3c.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C24XX_PA_UART
-		ldr	\rv, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [\rx, # S3C2410_UFSTAT]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <debug/samsung.S>

arch/arm/plat-samsung/Makefile

@@ -4,6 +4,9 @@
 #
 # Licensed under GPLv2
 
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS)	+= -I$(srctree)/arch/arm/mach-exynos/include
+
 obj-y				:=
 obj-m				:=
 obj-n				:= dummy.o

arch/arm/plat-samsung/include/plat/cpu.h

@@ -43,16 +43,6 @@ extern unsigned long samsung_cpu_id;
 #define S5PV210_CPU_ID		0x43110000
 #define S5PV210_CPU_MASK	0xFFFFF000
 
-#define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
-#define EXYNOS4412_CPU_ID	0xE4412200
-#define EXYNOS4_CPU_MASK	0xFFFE0000
-
-#define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5420_SOC_ID	0xE5420000
-#define EXYNOS5440_SOC_ID	0xE5440000
-#define EXYNOS5_SOC_MASK	0xFFFFF000
-
 #define IS_SAMSUNG_CPU(name, id, mask)		\
 static inline int is_samsung_##name(void)	\
 {						\
@@ -68,12 +58,6 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
 IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
-IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -126,50 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_s5pv210()	0
 #endif
 
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210()	is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412()	is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412()	0
-#endif
-
-#define EXYNOS4210_REV_0	(0x0)
-#define EXYNOS4210_REV_1_0	(0x10)
-#define EXYNOS4210_REV_1_1	(0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250()	is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-# define soc_is_exynos5420()	is_samsung_exynos5420()
-#else
-# define soc_is_exynos5420()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-# define soc_is_exynos5440()	is_samsung_exynos5440()
-#else
-# define soc_is_exynos5440()	0
-#endif
-
-#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
-			  soc_is_exynos4412())
-#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420())
-
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ
@@ -239,7 +179,6 @@ extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
 extern struct bus_type s5p64x0_subsys;
 extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos_subsys;
 
 extern void (*s5pc1xx_idle)(void);
 

drivers/clk/samsung/clk-exynos5250.c

@@ -30,6 +30,8 @@
 #define MPLL_CON0		0x4100
 #define SRC_CORE1		0x4204
 #define GATE_IP_ACP		0x8800
+#define GATE_IP_ISP0		0xc800
+#define GATE_IP_ISP1		0xc804
 #define CPLL_LOCK		0x10020
 #define EPLL_LOCK		0x10030
 #define VPLL_LOCK		0x10040
@@ -166,6 +168,8 @@ static unsigned long exynos5250_clk_regs[] __initdata = {
 	PLL_DIV2_SEL,
 	GATE_IP_DISP1,
 	GATE_IP_ACP,
+	GATE_IP_ISP0,
+	GATE_IP_ISP1,
 };
 
 static int exynos5250_clk_suspend(void)
@@ -223,6 +227,7 @@ PNAME(mout_aclk400_p)	= { "mout_aclk400_g3d_mid", "mout_gpll" };
 PNAME(mout_aclk200_sub_p) = { "fin_pll", "div_aclk200" };
 PNAME(mout_aclk266_sub_p) = { "fin_pll", "div_aclk266" };
 PNAME(mout_aclk333_sub_p) = { "fin_pll", "div_aclk333" };
+PNAME(mout_aclk400_isp_sub_p) = { "fin_pll", "div_aclk400_isp" };
 PNAME(mout_hdmi_p)	= { "div_hdmi_pixel", "sclk_hdmiphy" };
 PNAME(mout_usb3_p)	= { "mout_mpll_user", "mout_cpll" };
 PNAME(mout_group1_p)	= { "fin_pll", "fin_pll", "sclk_hdmi27m",
@@ -302,6 +307,7 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	MUX(0, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
 	MUX(0, "mout_aclk400_g3d_mid", mout_aclk200_p, SRC_TOP0, 20, 1),
 
+	MUX(0, "mout_aclk400_isp", mout_aclk200_p, SRC_TOP1, 24, 1),
 	MUX(0, "mout_aclk400_g3d", mout_aclk400_p, SRC_TOP1, 28, 1),
 
 	MUX(0, "mout_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
@@ -313,6 +319,9 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 
 	MUX(0, "mout_aclk200_disp1_sub", mout_aclk200_sub_p, SRC_TOP3, 4, 1),
 	MUX(0, "mout_aclk266_gscl_sub", mout_aclk266_sub_p, SRC_TOP3, 8, 1),
+	MUX(0, "mout_aclk_266_isp_sub", mout_aclk266_sub_p, SRC_TOP3, 16, 1),
+	MUX(0, "mout_aclk_400_isp_sub", mout_aclk400_isp_sub_p,
+			SRC_TOP3, 20, 1),
 	MUX(0, "mout_aclk333_sub", mout_aclk333_sub_p, SRC_TOP3, 24, 1),
 
 	MUX(0, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4),
@@ -385,6 +394,7 @@ static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(0, "div_aclk400_g3d", "mout_aclk400_g3d", DIV_TOP0,
 							24, 3),
 
+	DIV(0, "div_aclk400_isp", "mout_aclk400_isp", DIV_TOP1, 20, 3),
 	DIV(0, "div_aclk66_pre", "mout_mpll_user", DIV_TOP1, 24, 3),
 
 	DIV(0, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4),
@@ -650,6 +660,31 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 	GATE(CLK_WDT, "wdt", "div_aclk66", GATE_IP_PERIS, 19, 0, 0),
 	GATE(CLK_RTC, "rtc", "div_aclk66", GATE_IP_PERIS, 20, 0, 0),
 	GATE(CLK_TMU, "tmu", "div_aclk66", GATE_IP_PERIS, 21, 0, 0),
+	GATE(CLK_SMMU_TV, "smmu_tv", "mout_aclk200_disp1_sub",
+			GATE_IP_DISP1, 2, 0, 0),
+	GATE(CLK_SMMU_FIMD1, "smmu_fimd1", "mout_aclk200_disp1_sub",
+			GATE_IP_DISP1, 8, 0, 0),
+	GATE(CLK_SMMU_2D, "smmu_2d", "div_aclk200", GATE_IP_ACP, 7, 0, 0),
+	GATE(CLK_SMMU_FIMC_ISP, "smmu_fimc_isp", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 8, 0, 0),
+	GATE(CLK_SMMU_FIMC_DRC, "smmu_fimc_drc", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 9, 0, 0),
+	GATE(CLK_SMMU_FIMC_FD, "smmu_fimc_fd", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 10, 0, 0),
+	GATE(CLK_SMMU_FIMC_SCC, "smmu_fimc_scc", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 11, 0, 0),
+	GATE(CLK_SMMU_FIMC_SCP, "smmu_fimc_scp", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP0, 12, 0, 0),
+	GATE(CLK_SMMU_FIMC_MCU, "smmu_fimc_mcu", "mout_aclk_400_isp_sub",
+			GATE_IP_ISP0, 13, 0, 0),
+	GATE(CLK_SMMU_FIMC_ODC, "smmu_fimc_odc", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 4, 0, 0),
+	GATE(CLK_SMMU_FIMC_DIS0, "smmu_fimc_dis0", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 5, 0, 0),
+	GATE(CLK_SMMU_FIMC_DIS1, "smmu_fimc_dis1", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 6, 0, 0),
+	GATE(CLK_SMMU_FIMC_3DNR, "smmu_fimc_3dnr", "mout_aclk_266_isp_sub",
+			GATE_IP_ISP1, 7, 0, 0),
 };
 
 static struct samsung_pll_rate_table vpll_24mhz_tbl[] __initdata = {

drivers/cpufreq/Kconfig.arm

@@ -30,7 +30,7 @@ config ARM_EXYNOS_CPUFREQ
 
 config ARM_EXYNOS4210_CPUFREQ
 	bool "SAMSUNG EXYNOS4210"
-	depends on CPU_EXYNOS4210 && !ARCH_MULTIPLATFORM
+	depends on CPU_EXYNOS4210
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
@@ -41,7 +41,7 @@ config ARM_EXYNOS4210_CPUFREQ
 
 config ARM_EXYNOS4X12_CPUFREQ
 	bool "SAMSUNG EXYNOS4x12"
-	depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
+	depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help
@@ -52,7 +52,7 @@ config ARM_EXYNOS4X12_CPUFREQ
 
 config ARM_EXYNOS5250_CPUFREQ
 	bool "SAMSUNG EXYNOS5250"
-	depends on SOC_EXYNOS5250 && !ARCH_MULTIPLATFORM
+	depends on SOC_EXYNOS5250
 	default y
 	select ARM_EXYNOS_CPUFREQ
 	help

drivers/cpufreq/exynos-cpufreq.c

@@ -17,8 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_device.h>
-
-#include <plat/cpu.h>
+#include <linux/of.h>
 
 #include "exynos-cpufreq.h"
 
@@ -163,14 +162,22 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!exynos_info)
 		return -ENOMEM;
 
-	if (soc_is_exynos4210())
+	if (of_machine_is_compatible("samsung,exynos4210")) {
+		exynos_info->type = EXYNOS_SOC_4210;
 		ret = exynos4210_cpufreq_init(exynos_info);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
+	} else if (of_machine_is_compatible("samsung,exynos4212")) {
+		exynos_info->type = EXYNOS_SOC_4212;
+		ret = exynos4x12_cpufreq_init(exynos_info);
+	} else if (of_machine_is_compatible("samsung,exynos4412")) {
+		exynos_info->type = EXYNOS_SOC_4412;
 		ret = exynos4x12_cpufreq_init(exynos_info);
-	else if (soc_is_exynos5250())
+	} else if (of_machine_is_compatible("samsung,exynos5250")) {
+		exynos_info->type = EXYNOS_SOC_5250;
 		ret = exynos5250_cpufreq_init(exynos_info);
-	else
-		return 0;
+	} else {
+		pr_err("%s: Unknown SoC type\n", __func__);
+		return -ENODEV;
+	}
 
 	if (ret)
 		goto err_vdd_arm;

drivers/cpufreq/exynos-cpufreq.h

@@ -17,6 +17,13 @@ enum cpufreq_level_index {
 	L20,
 };
 
+enum exynos_soc_type {
+	EXYNOS_SOC_4210,
+	EXYNOS_SOC_4212,
+	EXYNOS_SOC_4412,
+	EXYNOS_SOC_5250,
+};
+
 #define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
 	{ \
 		.freq = (f) * 1000, \
@@ -34,6 +41,7 @@ struct apll_freq {
 };
 
 struct exynos_dvfs_info {
+	enum exynos_soc_type type;
 	unsigned long	mpll_freq_khz;
 	unsigned int	pll_safe_idx;
 	struct clk	*cpu_clk;
@@ -41,6 +49,7 @@ struct exynos_dvfs_info {
 	struct cpufreq_frequency_table	*freq_table;
 	void (*set_freq)(unsigned int, unsigned int);
 	bool (*need_apll_change)(unsigned int, unsigned int);
+	void __iomem	*cmu_regs;
 };
 
 #ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
@@ -68,24 +77,21 @@ static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 }
 #endif
 
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#define EXYNOS4_CLKSRC_CPU			(S5P_VA_CMU + 0x14200)
-#define EXYNOS4_CLKMUX_STATCPU			(S5P_VA_CMU + 0x14400)
+#define EXYNOS4_CLKSRC_CPU			0x14200
+#define EXYNOS4_CLKMUX_STATCPU			0x14400
 
-#define EXYNOS4_CLKDIV_CPU			(S5P_VA_CMU + 0x14500)
-#define EXYNOS4_CLKDIV_CPU1			(S5P_VA_CMU + 0x14504)
-#define EXYNOS4_CLKDIV_STATCPU			(S5P_VA_CMU + 0x14600)
-#define EXYNOS4_CLKDIV_STATCPU1			(S5P_VA_CMU + 0x14604)
+#define EXYNOS4_CLKDIV_CPU			0x14500
+#define EXYNOS4_CLKDIV_CPU1			0x14504
+#define EXYNOS4_CLKDIV_STATCPU			0x14600
+#define EXYNOS4_CLKDIV_STATCPU1			0x14604
 
 #define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT	(16)
 #define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK	(0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
 
-#define EXYNOS5_APLL_LOCK			(S5P_VA_CMU + 0x00000)
-#define EXYNOS5_APLL_CON0			(S5P_VA_CMU + 0x00100)
-#define EXYNOS5_CLKMUX_STATCPU			(S5P_VA_CMU + 0x00400)
-#define EXYNOS5_CLKDIV_CPU0			(S5P_VA_CMU + 0x00500)
-#define EXYNOS5_CLKDIV_CPU1			(S5P_VA_CMU + 0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0			(S5P_VA_CMU + 0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1			(S5P_VA_CMU + 0x00604)
+#define EXYNOS5_APLL_LOCK			0x00000
+#define EXYNOS5_APLL_CON0			0x00100
+#define EXYNOS5_CLKMUX_STATCPU			0x00400
+#define EXYNOS5_CLKDIV_CPU0			0x00500
+#define EXYNOS5_CLKDIV_CPU1			0x00504
+#define EXYNOS5_CLKDIV_STATCPU0			0x00600
+#define EXYNOS5_CLKDIV_STATCPU1			0x00604

drivers/cpufreq/exynos4210-cpufreq.c

@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -23,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos4210_volt_table[] = {
 	1250000, 1150000, 1050000, 975000, 950000,
@@ -60,20 +63,20 @@ static void exynos4210_set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_4210[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU);
 	} while (tmp & 0x1111111);
 
 	/* Change Divider - CPU1 */
 
 	tmp = apll_freq_4210[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
 	} while (tmp & 0x11);
 }
 
@@ -85,7 +88,7 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_mpll);
 
 	do {
-		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
 			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
@@ -96,7 +99,7 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_apll);
 
 	do {
-		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
 		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
 	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
@@ -115,8 +118,30 @@ static void exynos4210_set_frequency(unsigned int old_index,
 
 int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -143,6 +168,8 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos4210_freq_table;
 	info->set_freq = exynos4210_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:

drivers/cpufreq/exynos4x12-cpufreq.c

@@ -16,6 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -23,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos4x12_volt_table[] = {
 	1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
@@ -100,28 +103,26 @@ static struct apll_freq apll_freq_4412[] = {
 static void exynos4x12_set_clkdiv(unsigned int div_index)
 {
 	unsigned int tmp;
-	unsigned int stat_cpu1;
 
 	/* Change Divider - CPU0 */
 
 	tmp = apll_freq_4x12[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
 
-	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU)
+	       & 0x11111111)
 		cpu_relax();
 
 	/* Change Divider - CPU1 */
 	tmp = apll_freq_4x12[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
-	if (soc_is_exynos4212())
-		stat_cpu1 = 0x11;
-	else
-		stat_cpu1 = 0x111;
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
 
-	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+	do {
 		cpu_relax();
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
+	} while (tmp != 0x0);
 }
 
 static void exynos4x12_set_apll(unsigned int index)
@@ -133,7 +134,7 @@ static void exynos4x12_set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
 			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
@@ -145,7 +146,7 @@ static void exynos4x12_set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
 		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
 	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
@@ -164,8 +165,30 @@ static void exynos4x12_set_frequency(unsigned int old_index,
 
 int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -184,7 +207,7 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	if (IS_ERR(mout_apll))
 		goto err_mout_apll;
 
-	if (soc_is_exynos4212())
+	if (info->type == EXYNOS_SOC_4212)
 		apll_freq_4x12 = apll_freq_4212;
 	else
 		apll_freq_4x12 = apll_freq_4412;
@@ -197,6 +220,8 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos4x12_freq_table;
 	info->set_freq = exynos4x12_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:

drivers/cpufreq/exynos5250-cpufreq.c

@@ -16,8 +16,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
-
-#include <mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include "exynos-cpufreq.h"
 
@@ -25,6 +25,7 @@ static struct clk *cpu_clk;
 static struct clk *moutcore;
 static struct clk *mout_mpll;
 static struct clk *mout_apll;
+static struct exynos_dvfs_info *cpufreq;
 
 static unsigned int exynos5250_volt_table[] = {
 	1300000, 1250000, 1225000, 1200000, 1150000,
@@ -87,17 +88,18 @@ static void set_clkdiv(unsigned int div_index)
 
 	tmp = apll_freq_5250[div_index].clk_div_cpu0;
 
-	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
 
-	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
+	       & 0x11111111)
 		cpu_relax();
 
 	/* Change Divider - CPU1 */
 	tmp = apll_freq_5250[div_index].clk_div_cpu1;
 
-	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
+	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
 
-	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
+	while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
 		cpu_relax();
 }
 
@@ -111,7 +113,8 @@ static void set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
+		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
+			>> 16);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
 
@@ -122,7 +125,7 @@ static void set_apll(unsigned int index)
 
 	do {
 		cpu_relax();
-		tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
+		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
 		tmp &= (0x7 << 16);
 	} while (tmp != (0x1 << 16));
 }
@@ -141,8 +144,30 @@ static void exynos5250_set_frequency(unsigned int old_index,
 
 int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 {
+	struct device_node *np;
 	unsigned long rate;
 
+	/*
+	 * HACK: This is a temporary workaround to get access to clock
+	 * controller registers directly and remove static mappings and
+	 * dependencies on platform headers. It is necessary to enable
+	 * Exynos multi-platform support and will be removed together with
+	 * this whole driver as soon as Exynos gets migrated to use
+	 * cpufreq-cpu0 driver.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
+	if (!np) {
+		pr_err("%s: failed to find clock controller DT node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	info->cmu_regs = of_iomap(np, 0);
+	if (!info->cmu_regs) {
+		pr_err("%s: failed to map CMU registers\n", __func__);
+		return -EFAULT;
+	}
+
 	cpu_clk = clk_get(NULL, "armclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
@@ -169,6 +194,8 @@ int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
 	info->freq_table = exynos5250_freq_table;
 	info->set_freq = exynos5250_set_frequency;
 
+	cpufreq = info;
+
 	return 0;
 
 err_mout_apll:

include/dt-bindings/clock/exynos5250.h

@@ -152,6 +152,22 @@
 #define CLK_SMMU_MDMA0		347
 #define CLK_SSS			348
 #define CLK_G3D			349
+#define CLK_SMMU_TV		350
+#define CLK_SMMU_FIMD1		351
+#define CLK_SMMU_2D		352
+#define CLK_SMMU_FIMC_ISP	353
+#define CLK_SMMU_FIMC_DRC	354
+#define CLK_SMMU_FIMC_SCC	355
+#define CLK_SMMU_FIMC_SCP	356
+#define CLK_SMMU_FIMC_FD	357
+#define CLK_SMMU_FIMC_MCU	358
+#define CLK_SMMU_FIMC_ODC	359
+#define CLK_SMMU_FIMC_DIS0	360
+#define CLK_SMMU_FIMC_DIS1	361
+#define CLK_SMMU_FIMC_3DNR	362
+#define CLK_SMMU_FIMC_LITE0	363
+#define CLK_SMMU_FIMC_LITE1	364
+#define CLK_CAMIF_TOP		365
 
 /* mux clocks */
 #define CLK_MOUT_HDMI		1024