Merge 3.13-rc2 into driver-core-next

We want those fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/Changes

@@ -196,13 +196,6 @@ chmod 0644 /dev/cpu/microcode
 as root before you can use this.  You'll probably also want to
 get the user-space microcode_ctl utility to use with this.
 
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
 udev
 ----
 udev is a userspace application for populating /dev dynamically with
@@ -366,10 +359,6 @@ Intel P6 microcode
 ------------------
 o  <http://www.urbanmyth.org/microcode/>
 
-Powertweak
-----------
-o  <http://powertweak.sourceforge.net/>
-
 udev
 ----
 o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>

Documentation/DocBook/device-drivers.tmpl

@@ -58,7 +58,7 @@
      </sect1>
      <sect1><title>Wait queues and Wake events</title>
 !Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
      </sect1>
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h

Documentation/devicetree/bindings/i2c/i2c-omap.txt

@@ -1,7 +1,8 @@
 I2C for OMAP platforms
 
 Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+  or "ti,omap4-i2c"
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;

Documentation/devicetree/bindings/rng/qcom,prng.txt

@@ -0,0 +1,17 @@
+Qualcomm MSM pseudo random number generator.
+
+Required properties:
+
+- compatible  : should be "qcom,prng"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
+
+Example:
+
+	rng@f9bff000 {
+		compatible = "qcom,prng";
+		reg = <0xf9bff000 0x200>;
+		clocks = <&clock GCC_PRNG_AHB_CLK>;
+		clock-names = "core";
+	};

Documentation/gpio/board.txt

@@ -0,0 +1,115 @@
+GPIO Mappings
+=============
+
+This document explains how GPIOs can be assigned to given devices and functions.
+Note that it only applies to the new descriptor-based interface. For a
+description of the deprecated integer-based GPIO interface please refer to
+gpio-legacy.txt (actually, there is no real mapping possible with the old
+interface; you just fetch an integer from somewhere and request the
+corresponding GPIO.
+
+Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
+is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
+their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+describe its hardware layout. Currently, mappings can be defined through device
+tree, ACPI, and platform data.
+
+Device Tree
+-----------
+GPIOs can easily be mapped to devices and functions in the device tree. The
+exact way to do it depends on the GPIO controller providing the GPIOs, see the
+device tree bindings for your controller.
+
+GPIOs mappings are defined in the consumer device's node, in a property named
+<function>-gpios, where <function> is the function the driver will request
+through gpiod_get(). For example:
+
+	foo_device {
+		compatible = "acme,foo";
+		...
+		led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
+			    <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
+			    <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
+
+		power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+This property will make GPIOs 15, 16 and 17 available to the driver under the
+"led" function, and GPIO 1 as the "power" GPIO:
+
+	struct gpio_desc *red, *green, *blue, *power;
+
+	red = gpiod_get_index(dev, "led", 0);
+	green = gpiod_get_index(dev, "led", 1);
+	blue = gpiod_get_index(dev, "led", 2);
+
+	power = gpiod_get(dev, "power");
+
+The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
+gpiod_is_active_low(power) will be true).
+
+ACPI
+----
+ACPI does not support function names for GPIOs. Therefore, only the "idx"
+argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
+to a device. The "con_id" argument can still be set for debugging purposes (it
+will appear under error messages as well as debug and sysfs nodes).
+
+Platform Data
+-------------
+Finally, GPIOs can be bound to devices and functions using platform data. Board
+files that desire to do so need to include the following header:
+
+	#include <linux/gpio/driver.h>
+
+GPIOs are mapped by the means of tables of lookups, containing instances of the
+gpiod_lookup structure. Two macros are defined to help declaring such mappings:
+
+	GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
+	GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
+
+where
+
+  - chip_label is the label of the gpiod_chip instance providing the GPIO
+  - chip_hwnum is the hardware number of the GPIO within the chip
+  - dev_id is the identifier of the device that will make use of this GPIO. If
+	NULL, the GPIO will be available to all devices.
+  - con_id is the name of the GPIO function from the device point of view. It
+	can be NULL.
+  - idx is the index of the GPIO within the function.
+  - flags is defined to specify the following properties:
+	* GPIOF_ACTIVE_LOW	- to configure the GPIO as active-low
+	* GPIOF_OPEN_DRAIN	- GPIO pin is open drain type.
+	* GPIOF_OPEN_SOURCE	- GPIO pin is open source type.
+
+In the future, these flags might be extended to support more properties.
+
+Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
+
+A lookup table can then be defined as follows:
+
+	struct gpiod_lookup gpios_table[] = {
+	GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
+	GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
+	};
+
+And the table can be added by the board code as follows:
+
+	gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+
+The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
+
+	struct gpio_desc *red, *green, *blue, *power;
+
+	red = gpiod_get_index(dev, "led", 0);
+	green = gpiod_get_index(dev, "led", 1);
+	blue = gpiod_get_index(dev, "led", 2);
+
+	power = gpiod_get(dev, "power");
+	gpiod_direction_output(power, 1);
+
+Since the "power" GPIO is mapped as active-low, its actual signal will be 0
+after this code. Contrary to the legacy integer GPIO interface, the active-low
+property is handled during mapping and is thus transparent to GPIO consumers.

Documentation/gpio/consumer.txt

@@ -0,0 +1,197 @@
+GPIO Descriptor Consumer Interface
+==================================
+
+This document describes the consumer interface of the GPIO framework. Note that
+it describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+
+Guidelines for GPIOs consumers
+==============================
+
+Drivers that can't work without standard GPIO calls should have Kconfig entries
+that depend on GPIOLIB. The functions that allow a driver to obtain and use
+GPIOs are available by including the following file:
+
+	#include <linux/gpio/consumer.h>
+
+All the functions that work with the descriptor-based GPIO interface are
+prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
+other function in the kernel should use these prefixes.
+
+
+Obtaining and Disposing GPIOs
+=============================
+
+With the descriptor-based interface, GPIOs are identified with an opaque,
+non-forgeable handler that must be obtained through a call to one of the
+gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
+device that will use the GPIO and the function the requested GPIO is supposed to
+fulfill:
+
+	struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
+
+If a function is implemented by using several GPIOs together (e.g. a simple LED
+device that displays digits), an additional index argument can be specified:
+
+	struct gpio_desc *gpiod_get_index(struct device *dev,
+					  const char *con_id, unsigned int idx)
+
+Both functions return either a valid GPIO descriptor, or an error code checkable
+with IS_ERR(). They will never return a NULL pointer.
+
+Device-managed variants of these functions are also defined:
+
+	struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
+
+	struct gpio_desc *devm_gpiod_get_index(struct device *dev,
+					       const char *con_id,
+					       unsigned int idx)
+
+A GPIO descriptor can be disposed of using the gpiod_put() function:
+
+	void gpiod_put(struct gpio_desc *desc)
+
+It is strictly forbidden to use a descriptor after calling this function. The
+device-managed variant is, unsurprisingly:
+
+	void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+
+
+Using GPIOs
+===========
+
+Setting Direction
+-----------------
+The first thing a driver must do with a GPIO is setting its direction. This is
+done by invoking one of the gpiod_direction_*() functions:
+
+	int gpiod_direction_input(struct gpio_desc *desc)
+	int gpiod_direction_output(struct gpio_desc *desc, int value)
+
+The return value is zero for success, else a negative errno. It should be
+checked, since the get/set calls don't return errors and since misconfiguration
+is possible. You should normally issue these calls from a task context. However,
+for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
+of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value. This
+helps avoid signal glitching during system startup.
+
+A driver can also query the current direction of a GPIO:
+
+	int gpiod_get_direction(const struct gpio_desc *desc)
+
+This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
+
+Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
+without setting its direction first is illegal and will result in undefined
+behavior!**
+
+
+Spinlock-Safe GPIO Access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions. Those
+don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
+handlers and similar contexts.
+
+Use the following calls to access GPIOs from an atomic context:
+
+	int gpiod_get_value(const struct gpio_desc *desc);
+	void gpiod_set_value(struct gpio_desc *desc, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the value
+of an output pin, the value returned should be what's seen on the pin. That
+won't always match the specified output value, because of issues including
+open-drain signaling and output latencies.
+
+The get/set calls do not return errors because "invalid GPIO" should have been
+reported earlier from gpiod_direction_*(). However, note that not all platforms
+can read the value of output pins; those that can't should always return zero.
+Also, using these calls for GPIOs that can't safely be accessed without sleeping
+(see below) is an error.
+
+
+GPIO Access That May Sleep
+--------------------------
+Some GPIO controllers must be accessed using message based buses like I2C or
+SPI. Commands to read or write those GPIO values require waiting to get to the
+head of a queue to transmit a command and get its response. This requires
+sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs by
+returning nonzero from this call:
+
+	int gpiod_cansleep(const struct gpio_desc *desc)
+
+To access such GPIOs, a different set of accessors is defined:
+
+	int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+	void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+
+Accessing such GPIOs requires a context which may sleep, for example a threaded
+IRQ handler, and those accessors must be used instead of spinlock-safe
+accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work on GPIOs
+that can't be accessed from hardIRQ handlers, these calls act the same as the
+spinlock-safe calls.
+
+
+Active-low State and Raw GPIO Values
+------------------------------------
+Device drivers like to manage the logical state of a GPIO, i.e. the value their
+device will actually receive, no matter what lies between it and the GPIO line.
+In some cases, it might make sense to control the actual GPIO line value. The
+following set of calls ignore the active-low property of a GPIO and work on the
+raw line value:
+
+	int gpiod_get_raw_value(const struct gpio_desc *desc)
+	void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+	int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+	void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+
+The active-low state of a GPIO can also be queried using the following call:
+
+	int gpiod_is_active_low(const struct gpio_desc *desc)
+
+Note that these functions should only be used with great moderation ; a driver
+should not have to care about the physical line level.
+
+GPIOs mapped to IRQs
+--------------------
+GPIO lines can quite often be used as IRQs. You can get the IRQ number
+corresponding to a given GPIO using the following call:
+
+	int gpiod_to_irq(const struct gpio_desc *desc)
+
+It will return an IRQ number, or an negative errno code if the mapping can't be
+done (most likely because that particular GPIO cannot be used as IRQ). It is an
+unchecked error to use a GPIO that wasn't set up as an input using
+gpiod_direction_input(), or to use an IRQ number that didn't originally come
+from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
+
+Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
+free_irq(). They will often be stored into IRQ resources for platform devices,
+by the board-specific initialization code. Note that IRQ trigger options are
+part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
+capabilities.
+
+
+Interacting With the Legacy GPIO Subsystem
+==========================================
+Many kernel subsystems still handle GPIOs using the legacy integer-based
+interface. Although it is strongly encouraged to upgrade them to the safer
+descriptor-based API, the following two functions allow you to convert a GPIO
+descriptor into the GPIO integer namespace and vice-versa:
+
+	int desc_to_gpio(const struct gpio_desc *desc)
+	struct gpio_desc *gpio_to_desc(unsigned gpio)
+
+The GPIO number returned by desc_to_gpio() can be safely used as long as the
+GPIO descriptor has not been freed. All the same, a GPIO number passed to
+gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
+descriptor is only possible after the GPIO number has been released.
+
+Freeing a GPIO obtained by one API with the other API is forbidden and an
+unchecked error.

Documentation/gpio/driver.txt

@@ -0,0 +1,75 @@
+GPIO Descriptor Driver Interface
+================================
+
+This document serves as a guide for GPIO chip drivers writers. Note that it
+describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+Each GPIO controller driver needs to include the following header, which defines
+the structures used to define a GPIO driver:
+
+	#include <linux/gpio/driver.h>
+
+
+Internal Representation of GPIOs
+================================
+
+Inside a GPIO driver, individual GPIOs are identified by their hardware number,
+which is a unique number between 0 and n, n being the number of GPIOs managed by
+the chip. This number is purely internal: the hardware number of a particular
+GPIO descriptor is never made visible outside of the driver.
+
+On top of this internal number, each GPIO also need to have a global number in
+the integer GPIO namespace so that it can be used with the legacy GPIO
+interface. Each chip must thus have a "base" number (which can be automatically
+assigned), and for each GPIO the global number will be (base + hardware number).
+Although the integer representation is considered deprecated, it still has many
+users and thus needs to be maintained.
+
+So for example one platform could use numbers 32-159 for GPIOs, with a
+controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
+numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
+controller, and on one particular board 80-95 with an FPGA. The numbers need not
+be contiguous; either of those platforms could also use numbers 2000-2063 to
+identify GPIOs in a bank of I2C GPIO expanders.
+
+
+Controller Drivers: gpio_chip
+=============================
+
+In the gpiolib framework each GPIO controller is packaged as a "struct
+gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
+common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - method to return the IRQ number associated to a given GPIO
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - optional base number (will be automatically assigned if omitted)
+ - label for diagnostics and GPIOs mapping using platform data
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
+use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state not
+exposed by the GPIO interfaces, such as addressing, power management, and more.
+Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns either
+NULL or the label associated with that GPIO when it was requested.
+
+Locking IRQ usage
+-----------------
+Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
+to mark the GPIO as being used as an IRQ:
+
+	int gpiod_lock_as_irq(struct gpio_desc *desc)
+
+This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
+is released:
+
+	void gpiod_unlock_as_irq(struct gpio_desc *desc)

Documentation/gpio/gpio.txt

@@ -0,0 +1,119 @@
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+Due to the history of GPIO interfaces in the kernel, there are two different
+ways to obtain and use GPIOs:
+
+  - The descriptor-based interface is the preferred way to manipulate GPIOs,
+and is described by all the files in this directory excepted gpio-legacy.txt.
+  - The legacy integer-based interface which is considered deprecated (but still
+usable for compatibility reasons) is documented in gpio-legacy.txt.
+
+The remainder of this document applies to the new descriptor-based interface.
+gpio-legacy.txt contains the same information applied to the legacy
+integer-based interface.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+  - Output values are writable (high=1, low=0). Some chips also have
+    options about how that value is driven, so that for example only one
+    value might be driven, supporting "wire-OR" and similar schemes for the
+    other value (notably, "open drain" signaling).
+
+  - Input values are likewise readable (1, 0). Some chips support readback
+    of pins configured as "output", which is very useful in such "wire-OR"
+    cases (to support bidirectional signaling). GPIO controllers may have
+    input de-glitch/debounce logic, sometimes with software controls.
+
+  - Inputs can often be used as IRQ signals, often edge triggered but
+    sometimes level triggered. Such IRQs may be configurable as system
+    wakeup events, to wake the system from a low power state.
+
+  - Usually a GPIO will be configurable as either input or output, as needed
+    by different product boards; single direction ones exist too.
+
+  - Most GPIOs can be accessed while holding spinlocks, but those accessed
+    through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ LOW:	gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
+	the pullup.
+
+ HIGH:	gpiod_direction_input(gpio) ... this turns off the output, so the pullup
+	(or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched:  a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.

Documentation/gpio/sysfs.txt

@@ -0,0 +1,155 @@
+GPIO Sysfs Interface for Userspace
+==================================
+
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks:  "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+   -	Control interfaces used to get userspace control over GPIOs;
+
+   -	GPIOs themselves; and
+
+   -	GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+    /sys/class/gpio/
+
+    	"export" ... Userspace may ask the kernel to export control of
+		a GPIO to userspace by writing its number to this file.
+
+		Example:  "echo 19 > export" will create a "gpio19" node
+		for GPIO #19, if that's not requested by kernel code.
+
+    	"unexport" ... Reverses the effect of exporting to userspace.
+
+		Example:  "echo 19 > unexport" will remove a "gpio19"
+		node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+    /sys/class/gpio/gpioN/
+
+	"direction" ... reads as either "in" or "out". This value may
+		normally be written. Writing as "out" defaults to
+		initializing the value as low. To ensure glitch free
+		operation, values "low" and "high" may be written to
+		configure the GPIO as an output with that initial value.
+
+		Note that this attribute *will not exist* if the kernel
+		doesn't support changing the direction of a GPIO, or
+		it was exported by kernel code that didn't explicitly
+		allow userspace to reconfigure this GPIO's direction.
+
+	"value" ... reads as either 0 (low) or 1 (high). If the GPIO
+		is configured as an output, this value may be written;
+		any nonzero value is treated as high.
+
+		If the pin can be configured as interrupt-generating interrupt
+		and if it has been configured to generate interrupts (see the
+		description of "edge"), you can poll(2) on that file and
+		poll(2) will return whenever the interrupt was triggered. If
+		you use poll(2), set the events POLLPRI and POLLERR. If you
+		use select(2), set the file descriptor in exceptfds. After
+		poll(2) returns, either lseek(2) to the beginning of the sysfs
+		file and read the new value or close the file and re-open it
+		to read the value.
+
+	"edge" ... reads as either "none", "rising", "falling", or
+		"both". Write these strings to select the signal edge(s)
+		that will make poll(2) on the "value" file return.
+
+		This file exists only if the pin can be configured as an
+		interrupt generating input pin.
+
+	"active_low" ... reads as either 0 (false) or 1 (true). Write
+		any nonzero value to invert the value attribute both
+		for reading and writing. Existing and subsequent
+		poll(2) support configuration via the edge attribute
+		for "rising" and "falling" edges will follow this
+		setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+    /sys/class/gpio/gpiochipN/
+
+    	"base" ... same as N, the first GPIO managed by this chip
+
+    	"label" ... provided for diagnostics (not always unique)
+
+    	"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+	/* export the GPIO to userspace */
+	int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+
+	/* reverse gpio_export() */
+	void gpiod_unexport(struct gpio_desc *desc);
+
+	/* create a sysfs link to an exported GPIO node */
+	int gpiod_export_link(struct device *dev, const char *name,
+		      struct gpio_desc *desc);
+
+	/* change the polarity of a GPIO node in sysfs */
+	int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpiod_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpiod_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. Polarity change can be done both
+before and after gpiod_export(), and previously enabled poll(2) support for
+either rising or falling edge will be reconfigured to follow this setting.

MAINTAINERS

@@ -2142,6 +2142,11 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
 
+CHROME HARDWARE PLATFORM SUPPORT
+M:	Olof Johansson <olof@lixom.net>
+S:	Maintained
+F:	drivers/platform/chrome/
+
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
 M:	Sujith Sankar <ssujith@cisco.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arm/boot/dts/bcm2835.dtsi

@@ -85,6 +85,8 @@
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -93,6 +95,8 @@
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/cros5250-common.dtsi

@@ -27,6 +27,13 @@
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
+
+		max77686_irq: max77686-irq {
+			samsung,pins = "gpx3-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	i2c@12C60000 {
@@ -35,6 +42,11 @@
 
 		max77686@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			wakeup-source;
 			reg = <0x09>;
 
 			voltage-regulators {

arch/arm/boot/dts/imx6qdl.dtsi

@@ -161,7 +161,7 @@
 					clocks = <&clks 197>, <&clks 3>,
 						 <&clks 197>, <&clks 107>,
 						 <&clks 0>,   <&clks 118>,
-						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>,  <&clks 139>,
 						 <&clks 0>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/omap-zoom-common.dtsi

@@ -13,7 +13,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	8250@3,0 {
+	uart@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 0x100>;
 		bank-width = <2>;

arch/arm/boot/dts/omap2.dtsi

@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
 #include "skeleton.dtsi"
@@ -21,6 +22,8 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
 	};
 
 	cpus {
@@ -53,6 +56,28 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -63,6 +88,7 @@
 
 		sdma: dma-controller@48056000 {
 			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			ti,hwmods = "dma";
 			reg = <0x48056000 0x1000>;
 			interrupts = <12>,
 				     <13>,
@@ -73,21 +99,91 @@
 			#dma-requests = <64>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: mcspi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: mcspi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <36>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@4806e000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 

arch/arm/boot/dts/omap2420.dtsi

@@ -114,6 +114,15 @@
 			dma-names = "tx", "rx";
 		};
 
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;
@@ -121,5 +130,19 @@
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};

arch/arm/boot/dts/omap2430.dtsi

@@ -175,6 +175,25 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;
@@ -182,5 +201,35 @@
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		mcspi3: mcspi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};

arch/arm/mach-omap2/Makefile

@@ -19,11 +19,11 @@ secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5)	 += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o

arch/arm/mach-omap2/common.h

@@ -299,7 +299,6 @@ struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 extern void omap_reserve(void);
 
 struct omap_hwmod;

arch/arm/mach-omap2/display.c

@@ -32,7 +32,6 @@
 
 #include "soc.h"
 #include "iomap.h"
-#include "mux.h"
 #include "control.h"
 #include "display.h"
 #include "prm.h"
@@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
-static void __init omap4_tpd12s015_mux_pads(void)
-{
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
-	u32 reg;
-	u16 control_i2c_1;
-
-	/*
-	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
-	 * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
-	 * internal pull up resistor.
-	 */
-	if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
-		control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
-		reg = omap4_ctrl_pad_readl(control_i2c_1);
-		reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
-			OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
-			omap4_ctrl_pad_writel(reg, control_i2c_1);
-	}
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
-	u32 enable_mask, enable_shift;
-	u32 pipd_mask, pipd_shift;
-	u32 reg;
-
-	if (dsi_id == 0) {
-		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI1_PIPD_MASK;
-		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
-	} else if (dsi_id == 1) {
-		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI2_PIPD_MASK;
-		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
-	} else {
-		return -ENODEV;
-	}
-
-	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	reg &= ~enable_mask;
-	reg &= ~pipd_mask;
-
-	reg |= (lanes << enable_shift) & enable_mask;
-	reg |= (lanes << pipd_shift) & pipd_mask;
-
-	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
-	if (cpu_is_omap44xx()) {
-		omap4_hdmi_mux_pads(flags);
-		omap4_tpd12s015_mux_pads();
-	}
-
-	return 0;
-}
-
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
-	if (cpu_is_omap44xx())
-		return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
 	return 0;
 }
 
 static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
-	if (cpu_is_omap44xx())
-		omap4_dsi_mux_pads(dsi_id, 0);
 }
 
 static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)

arch/arm/mach-omap2/gpmc.c

@@ -1501,6 +1501,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 		return ret;
 	}
 
+	/*
+	 * For some GPMC devices we still need to rely on the bootloader
+	 * timings because the devices can be connected via FPGA. So far
+	 * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+	 * REVISIT: Add timing support from slls644g.pdf and from the
+	 * lan91c96 manual.
+	 */
+	if (of_device_is_compatible(child, "ns16550a") ||
+	    of_device_is_compatible(child, "smsc,lan91c94") ||
+	    of_device_is_compatible(child, "smsc,lan91c111")) {
+		dev_warn(&pdev->dev,
+			 "%s using bootloader timings on CS%d\n",
+			 child->name, cs);
+		goto no_timings;
+	}
+
 	/*
 	 * FIXME: gpmc_cs_request() will map the CS to an arbitary
 	 * location in the gpmc address space. When booting with
@@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	gpmc_read_timings_dt(child, &gpmc_t);
 	gpmc_cs_set_timings(cs, &gpmc_t);
 
+no_timings:
 	if (of_platform_device_create(child, NULL, &pdev->dev))
 		return 0;
 
@@ -1541,42 +1558,6 @@ err:
 	return ret;
 }
 
-/*
- * REVISIT: Add timing support from slls644g.pdf
- */
-static int gpmc_probe_8250(struct platform_device *pdev,
-				struct device_node *child)
-{
-	struct resource res;
-	unsigned long base;
-	int ret, cs;
-
-	if (of_property_read_u32(child, "reg", &cs) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
-		return -ENODEV;
-	}
-
-	if (of_address_to_resource(child, 0, &res) < 0) {
-		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
-			child->full_name);
-		return -ENODEV;
-	}
-
-	ret = gpmc_cs_request(cs, resource_size(&res), &base);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
-		return ret;
-	}
-
-	if (of_platform_device_create(child, NULL, &pdev->dev))
-		return 0;
-
-	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
-
-	return -ENODEV;
-}
-
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		else if (of_node_cmp(child->name, "onenand") == 0)
 			ret = gpmc_probe_onenand_child(pdev, child);
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
-			 of_node_cmp(child->name, "nor") == 0)
+			 of_node_cmp(child->name, "nor") == 0 ||
+			 of_node_cmp(child->name, "uart") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
-		else if (of_node_cmp(child->name, "8250") == 0)
-			ret = gpmc_probe_8250(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
 			 __func__, child->full_name))

arch/arm/mach-omap2/omap-secure.h

@@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 void set_cntfreq(void);
+#else
+static inline void set_cntfreq(void)
+{
+}
+#endif
+
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */

arch/arm/mach-omap2/omap4-common.c

@@ -35,7 +35,6 @@
 #include "iomap.h"
 #include "common.h"
 #include "mmc.h"
-#include "hsmmc.h"
 #include "prminst44xx.h"
 #include "prcm_mpu44xx.h"
 #include "omap4-sar-layout.h"
@@ -284,59 +283,3 @@ skip_errata_init:
 	omap_wakeupgen_init();
 	irqchip_init();
 }
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, irq);
-			return irq;
-		}
-		pdata->slots[0].card_detect_irq = irq;
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed %s\n", __func__);
-		return;
-	}
-	pdata = dev->platform_data;
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++) {
-		/* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
-		if (!c->pdev)
-			continue;
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-	}
-
-	return 0;
-}
-#else
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	return 0;
-}
-#endif

arch/arm/mach-omap2/pm34xx.c

@@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void)
 		 * will hang the system.
 		 */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-		ret = _omap_save_secure_sram((u32 *)
+		ret = _omap_save_secure_sram((u32 *)(unsigned long)
 				__pa(omap3_secure_ram_storage));
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */

arch/arm/mach-omap2/prm44xx_54xx.h

@@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX)
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
 void omap44xx_prm_reconfigure_io_chain(void);
 #else
 static inline void omap44xx_prm_reconfigure_io_chain(void)

arch/arm/mach-tegra/fuse.c

@@ -209,13 +209,3 @@ void __init tegra_init_fuse(void)
 		tegra_sku_id, tegra_cpu_process_id,
 		tegra_core_process_id);
 }
-
-unsigned long long tegra_chip_uid(void)
-{
-	unsigned long long lo, hi;
-
-	lo = tegra_fuse_readl(FUSE_UID_LOW);
-	hi = tegra_fuse_readl(FUSE_UID_HIGH);
-	return (hi << 32ull) | lo;
-}
-EXPORT_SYMBOL(tegra_chip_uid);

arch/arm/mach-vexpress/spc.c

@@ -53,6 +53,11 @@
 #define A15_BX_ADDR0		0x68
 #define A7_BX_ADDR0		0x78
 
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT		0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu)	(1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu)	(1 << (3 + (cpu)))
+
 /* SPC system config interface registers */
 #define SYSCFG_WDATA		0x70
 #define SYSCFG_RDATA		0x74
@@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable)
 	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
 }
 
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+	return cluster_is_a15(cluster) ?
+		  STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+		: STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+	int ret;
+	u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+	if (cluster >= MAX_CLUSTERS)
+		return 1;
+
+	ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+	pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+		 __func__, STANDBYWFI_STAT, ret, mask);
+
+	return ret & mask;
+}
+
 static int ve_spc_get_performance(int cluster, u32 *freq)
 {
 	struct ve_spc_opp *opps = info->opps[cluster];

arch/arm/mach-vexpress/spc.h

@@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set);
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
 void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
 void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
 
 #endif

arch/arm/mach-vexpress/tc2_pm.c

@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -32,11 +33,17 @@
 #include "spc.h"
 
 /* SCC conf registers */
+#define RESET_CTRL		0x018
+#define RESET_A15_NCORERESET(cpu)	(1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu)	(1 << (16 + (cpu)))
+
 #define A15_CONF		0x400
 #define A7_CONF			0x500
 #define SYS_INFO		0x700
 #define SPC_BASE		0xb00
 
+static void __iomem *scc;
+
 /*
  * We can't use regular spinlocks. In the switcher case, it is possible
  * for an outbound CPU to call power_down() after its inbound counterpart
@@ -190,6 +197,55 @@ static void tc2_pm_power_down(void)
 	tc2_pm_down(0);
 }
 
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+	u32 mask = cluster ?
+		  RESET_A7_NCORERESET(cpu)
+		: RESET_A15_NCORERESET(cpu);
+
+	return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+	unsigned tries;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+		/*
+		 * Only examine the hardware state if the target CPU has
+		 * caught up at least as far as tc2_pm_down():
+		 */
+		if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+			pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+				 __func__, cpu, cluster,
+				 readl_relaxed(scc + RESET_CTRL));
+
+			/*
+			 * We need the CPU to reach WFI, but the power
+			 * controller may put the cluster in reset and
+			 * power it off as soon as that happens, before
+			 * we have a chance to see STANDBYWFI.
+			 *
+			 * So we need to check for both conditions:
+			 */
+			if (tc2_core_in_reset(cpu, cluster) ||
+			    ve_spc_cpu_in_wfi(cpu, cluster))
+				return 0; /* success: the CPU is halted */
+		}
+
+		/* Otherwise, wait and retry: */
+		msleep(POLL_MSEC);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
 static void tc2_pm_suspend(u64 residency)
 {
 	unsigned int mpidr, cpu, cluster;
@@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void)
 }
 
 static const struct mcpm_platform_ops tc2_pm_power_ops = {
-	.power_up	= tc2_pm_power_up,
-	.power_down	= tc2_pm_power_down,
-	.suspend	= tc2_pm_suspend,
-	.powered_up	= tc2_pm_powered_up,
+	.power_up		= tc2_pm_power_up,
+	.power_down		= tc2_pm_power_down,
+	.power_down_finish	= tc2_pm_power_down_finish,
+	.suspend		= tc2_pm_suspend,
+	.powered_up		= tc2_pm_powered_up,
 };
 
 static bool __init tc2_pm_usage_count_init(void)
@@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
 static int __init tc2_pm_init(void)
 {
 	int ret, irq;
-	void __iomem *scc;
 	u32 a15_cluster_id, a7_cluster_id, sys_info;
 	struct device_node *np;
 

arch/arm64/boot/dts/foundation-v8.dts

@@ -6,6 +6,8 @@
 
 /dts-v1/;
 
+/memreserve/ 0x80000000 0x00010000;
+
 / {
 	model = "Foundation-v8A";
 	compatible = "arm,foundation-aarch64", "arm,vexpress";

arch/arm64/include/asm/irqflags.h

@@ -56,6 +56,9 @@ static inline void arch_local_irq_disable(void)
 #define local_fiq_enable()	asm("msr	daifclr, #1" : : : "memory")
 #define local_fiq_disable()	asm("msr	daifset, #1" : : : "memory")
 
+#define local_async_enable()	asm("msr	daifclr, #4" : : : "memory")
+#define local_async_disable()	asm("msr	daifset, #4" : : : "memory")
+
 /*
  * Save the current interrupt enable state.
  */

arch/arm64/include/asm/pgtable.h

@@ -25,10 +25,11 @@
  * Software defined PTE bits definition.
  */
 #define PTE_VALID		(_AT(pteval_t, 1) << 0)
-#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 2)	/* only when !PTE_VALID */
-#define PTE_FILE		(_AT(pteval_t, 1) << 3)	/* only when !pte_present() */
+#define PTE_FILE		(_AT(pteval_t, 1) << 2)	/* only when !pte_present() */
 #define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
 #define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
+				/* bit 57 for PMD_SECT_SPLITTING */
+#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
 
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
@@ -254,7 +255,7 @@ static inline int has_transparent_hugepage(void)
 #define pgprot_noncached(prot) \
 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE))
 #define pgprot_writecombine(prot) \
-	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE))
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
 #define __HAVE_PHYS_MEM_ACCESS_PROT
@@ -357,18 +358,20 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
 
 /*
  * Encode and decode a swap entry:
- *	bits 0, 2:	present (must both be zero)
- *	bit  3:		PTE_FILE
- *	bits 4-8:	swap type
- *	bits 9-63:	swap offset
+ *	bits 0-1:	present (must be zero)
+ *	bit  2:		PTE_FILE
+ *	bits 3-8:	swap type
+ *	bits 9-57:	swap offset
  */
-#define __SWP_TYPE_SHIFT	4
+#define __SWP_TYPE_SHIFT	3
 #define __SWP_TYPE_BITS		6
+#define __SWP_OFFSET_BITS	49
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_MASK	((1UL << __SWP_OFFSET_BITS) - 1)
 
 #define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
-#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_offset(x)		(((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK)
 #define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
 
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
@@ -382,15 +385,15 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
 
 /*
  * Encode and decode a file entry:
- *	bits 0, 2:	present (must both be zero)
- *	bit  3:		PTE_FILE
- *	bits 4-63:	file offset / PAGE_SIZE
+ *	bits 0-1:	present (must be zero)
+ *	bit  2:		PTE_FILE
+ *	bits 3-57:	file offset / PAGE_SIZE
  */
 #define pte_file(pte)		(pte_val(pte) & PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 4)
-#define pgoff_to_pte(x)		__pte(((x) << 4) | PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | PTE_FILE)
 
-#define PTE_FILE_MAX_BITS	60
+#define PTE_FILE_MAX_BITS	55
 
 extern int kern_addr_valid(unsigned long addr);
 

arch/arm64/kernel/debug-monitors.c

@@ -248,7 +248,8 @@ static int brk_handler(unsigned long addr, unsigned int esr,
 int aarch32_break_handler(struct pt_regs *regs)
 {
 	siginfo_t info;
-	unsigned int instr;
+	u32 arm_instr;
+	u16 thumb_instr;
 	bool bp = false;
 	void __user *pc = (void __user *)instruction_pointer(regs);
 
@@ -257,18 +258,21 @@ int aarch32_break_handler(struct pt_regs *regs)
 
 	if (compat_thumb_mode(regs)) {
 		/* get 16-bit Thumb instruction */
-		get_user(instr, (u16 __user *)pc);
-		if (instr == AARCH32_BREAK_THUMB2_LO) {
+		get_user(thumb_instr, (u16 __user *)pc);
+		thumb_instr = le16_to_cpu(thumb_instr);
+		if (thumb_instr == AARCH32_BREAK_THUMB2_LO) {
 			/* get second half of 32-bit Thumb-2 instruction */
-			get_user(instr, (u16 __user *)(pc + 2));
-			bp = instr == AARCH32_BREAK_THUMB2_HI;
+			get_user(thumb_instr, (u16 __user *)(pc + 2));
+			thumb_instr = le16_to_cpu(thumb_instr);
+			bp = thumb_instr == AARCH32_BREAK_THUMB2_HI;
 		} else {
-			bp = instr == AARCH32_BREAK_THUMB;
+			bp = thumb_instr == AARCH32_BREAK_THUMB;
 		}
 	} else {
 		/* 32-bit ARM instruction */
-		get_user(instr, (u32 __user *)pc);
-		bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM;
+		get_user(arm_instr, (u32 __user *)pc);
+		arm_instr = le32_to_cpu(arm_instr);
+		bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM;
 	}
 
 	if (!bp)

arch/arm64/kernel/entry.S

@@ -309,15 +309,12 @@ el1_irq:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
-#ifdef CONFIG_PREEMPT
-	get_thread_info tsk
-	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	w0, w24, #1			// increment it
-	str	w0, [tsk, #TI_PREEMPT]
-#endif
+
 	irq_handler
+
 #ifdef CONFIG_PREEMPT
-	str	w24, [tsk, #TI_PREEMPT]		// restore preempt count
+	get_thread_info tsk
+	ldr	w24, [tsk, #TI_PREEMPT]		// restore preempt count
 	cbnz	w24, 1f				// preempt count != 0
 	ldr	x0, [tsk, #TI_FLAGS]		// get flags
 	tbz	x0, #TIF_NEED_RESCHED, 1f	// needs rescheduling?
@@ -507,22 +504,10 @@ el0_irq_naked:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
-	get_thread_info tsk
-#ifdef CONFIG_PREEMPT
-	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	w23, w24, #1			// increment it
-	str	w23, [tsk, #TI_PREEMPT]
-#endif
+
 	irq_handler
-#ifdef CONFIG_PREEMPT
-	ldr	w0, [tsk, #TI_PREEMPT]
-	str	w24, [tsk, #TI_PREEMPT]
-	cmp	w0, w23
-	b.eq	1f
-	mov	x1, #0
-	str	x1, [x1]			// BUG
-1:
-#endif
+	get_thread_info tsk
+
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
 #endif

arch/arm64/kernel/ptrace.c

@@ -636,28 +636,27 @@ static int compat_gpr_get(struct task_struct *target,
 
 	for (i = 0; i < num_regs; ++i) {
 		unsigned int idx = start + i;
-		void *reg;
+		compat_ulong_t reg;
 
 		switch (idx) {
 		case 15:
-			reg = (void *)&task_pt_regs(target)->pc;
+			reg = task_pt_regs(target)->pc;
 			break;
 		case 16:
-			reg = (void *)&task_pt_regs(target)->pstate;
+			reg = task_pt_regs(target)->pstate;
 			break;
 		case 17:
-			reg = (void *)&task_pt_regs(target)->orig_x0;
+			reg = task_pt_regs(target)->orig_x0;
 			break;
 		default:
-			reg = (void *)&task_pt_regs(target)->regs[idx];
+			reg = task_pt_regs(target)->regs[idx];
 		}
 
-		ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t));
-
+		ret = copy_to_user(ubuf, &reg, sizeof(reg));
 		if (ret)
 			break;
-		else
-			ubuf += sizeof(compat_ulong_t);
+
+		ubuf += sizeof(reg);
 	}
 
 	return ret;
@@ -685,28 +684,28 @@ static int compat_gpr_set(struct task_struct *target,
 
 	for (i = 0; i < num_regs; ++i) {
 		unsigned int idx = start + i;
-		void *reg;
+		compat_ulong_t reg;
+
+		ret = copy_from_user(&reg, ubuf, sizeof(reg));
+		if (ret)
+			return ret;
+
+		ubuf += sizeof(reg);
 
 		switch (idx) {
 		case 15:
-			reg = (void *)&newregs.pc;
+			newregs.pc = reg;
 			break;
 		case 16:
-			reg = (void *)&newregs.pstate;
+			newregs.pstate = reg;
 			break;
 		case 17:
-			reg = (void *)&newregs.orig_x0;
+			newregs.orig_x0 = reg;
 			break;
 		default:
-			reg = (void *)&newregs.regs[idx];
+			newregs.regs[idx] = reg;
 		}
 
-		ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t));
-
-		if (ret)
-			goto out;
-		else
-			ubuf += sizeof(compat_ulong_t);
 	}
 
 	if (valid_user_regs(&newregs.user_regs))
@@ -714,7 +713,6 @@ static int compat_gpr_set(struct task_struct *target,
 	else
 		ret = -EINVAL;
 
-out:
 	return ret;
 }
 

arch/arm64/kernel/setup.c

@@ -205,6 +205,11 @@ u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
 
 void __init setup_arch(char **cmdline_p)
 {
+	/*
+	 * Unmask asynchronous aborts early to catch possible system errors.
+	 */
+	local_async_enable();
+
 	setup_processor();
 
 	setup_machine_fdt(__fdt_pointer);

arch/arm64/kernel/smp.c

@@ -160,6 +160,7 @@ asmlinkage void secondary_start_kernel(void)
 
 	local_irq_enable();
 	local_fiq_enable();
+	local_async_enable();
 
 	/*
 	 * OK, it's off to the idle thread for us

arch/powerpc/Makefile

@@ -75,8 +75,10 @@ LDEMULATION	:= lppc
 GNUTARGET	:= powerpcle
 MULTIPLEWORD	:= -mno-multiple
 else
+ifeq ($(call cc-option-yn,-mbig-endian),y)
 override CC	+= -mbig-endian
 override AS	+= -mbig-endian
+endif
 override LD	+= -EB
 LDEMULATION	:= ppc
 GNUTARGET	:= powerpc
@@ -128,7 +130,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
 CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
 CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
 E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
 CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
 CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
 

arch/powerpc/boot/dts/xcalibur1501.dts

@@ -637,14 +637,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};

arch/powerpc/boot/dts/xpedite5301.dts

@@ -547,14 +547,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};

arch/powerpc/boot/dts/xpedite5330.dts

@@ -583,14 +583,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};

arch/powerpc/boot/dts/xpedite5370.dts

@@ -545,14 +545,14 @@
 		tlu@2f000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x2f000 0x1000>;
-			interupts = <61 2 >;
+			interrupts = <61 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		tlu@15000 {
 			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
 			reg = <0x15000 0x1000>;
-			interupts = <75 2>;
+			interrupts = <75 2>;
 			interrupt-parent = <&mpic>;
 		};
 	};

arch/powerpc/boot/util.S

@@ -71,18 +71,32 @@ udelay:
 	add	r4,r4,r5
 	addi	r4,r4,-1
 	divw	r4,r4,r5	/* BUS ticks */
+#ifdef CONFIG_8xx
+1:	mftbu	r5
+	mftb	r6
+	mftbu	r7
+#else
 1:	mfspr	r5, SPRN_TBRU
 	mfspr	r6, SPRN_TBRL
 	mfspr	r7, SPRN_TBRU
+#endif
 	cmpw	0,r5,r7
 	bne	1b		/* Get [synced] base time */
 	addc	r9,r6,r4	/* Compute end time */
 	addze	r8,r5
+#ifdef CONFIG_8xx
+2:	mftbu	r5
+#else
 2:	mfspr	r5, SPRN_TBRU
+#endif
 	cmpw	0,r5,r8
 	blt	2b
 	bgt	3f
+#ifdef CONFIG_8xx
+	mftb	r6
+#else
 	mfspr	r6, SPRN_TBRL
+#endif
 	cmpw	0,r6,r9
 	blt	2b
 3:	blr

arch/powerpc/include/asm/pgalloc-64.h

@@ -16,6 +16,7 @@ struct vmemmap_backing {
 	unsigned long phys;
 	unsigned long virt_addr;
 };
+extern struct vmemmap_backing *vmemmap_list;
 
 /*
  * Functions that deal with pagetables that could be at any level of

arch/powerpc/include/asm/ppc_asm.h

@@ -366,6 +366,8 @@ BEGIN_FTR_SECTION_NESTED(96);		\
 	cmpwi dest,0;			\
 	beq-  90b;			\
 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#elif defined(CONFIG_8xx)
+#define MFTB(dest)			mftb dest
 #else
 #define MFTB(dest)			mfspr dest, SPRN_TBRL
 #endif

arch/powerpc/include/asm/reg.h

@@ -1174,12 +1174,19 @@
 
 #else /* __powerpc64__ */
 
+#if defined(CONFIG_8xx)
+#define mftbl()		({unsigned long rval;	\
+			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu()		({unsigned long rval;	\
+			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#else
 #define mftbl()		({unsigned long rval;	\
 			asm volatile("mfspr %0, %1" : "=r" (rval) : \
 				"i" (SPRN_TBRL)); rval;})
 #define mftbu()		({unsigned long rval;	\
 			asm volatile("mfspr %0, %1" : "=r" (rval) : \
 				"i" (SPRN_TBRU)); rval;})
+#endif
 #endif /* !__powerpc64__ */
 
 #define mttbl(v)	asm volatile("mttbl %0":: "r"(v))

arch/powerpc/include/asm/timex.h

@@ -29,7 +29,11 @@ static inline cycles_t get_cycles(void)
 	ret = 0;
 
 	__asm__ __volatile__(
+#ifdef CONFIG_8xx
+		"97:	mftb %0\n"
+#else
 		"97:	mfspr %0, %2\n"
+#endif
 		"99:\n"
 		".section __ftr_fixup,\"a\"\n"
 		".align 2\n"
@@ -41,7 +45,11 @@ static inline cycles_t get_cycles(void)
 		"	.long 0\n"
 		"	.long 0\n"
 		".previous"
+#ifdef CONFIG_8xx
+		: "=r" (ret) : "i" (CPU_FTR_601));
+#else
 		: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
+#endif
 	return ret;
 #endif
 }

arch/powerpc/kernel/machine_kexec.c

@@ -18,6 +18,7 @@
 #include <linux/ftrace.h>
 
 #include <asm/machdep.h>
+#include <asm/pgalloc.h>
 #include <asm/prom.h>
 #include <asm/sections.h>
 
@@ -75,6 +76,17 @@ void arch_crash_save_vmcoreinfo(void)
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 	VMCOREINFO_SYMBOL(contig_page_data);
 #endif
+#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+	VMCOREINFO_SYMBOL(vmemmap_list);
+	VMCOREINFO_SYMBOL(mmu_vmemmap_psize);
+	VMCOREINFO_SYMBOL(mmu_psize_defs);
+	VMCOREINFO_STRUCT_SIZE(vmemmap_backing);
+	VMCOREINFO_OFFSET(vmemmap_backing, list);
+	VMCOREINFO_OFFSET(vmemmap_backing, phys);
+	VMCOREINFO_OFFSET(vmemmap_backing, virt_addr);
+	VMCOREINFO_STRUCT_SIZE(mmu_psize_def);
+	VMCOREINFO_OFFSET(mmu_psize_def, shift);
+#endif
 }
 
 /*

arch/powerpc/kernel/nvram_64.c

@@ -210,7 +210,7 @@ static void __init nvram_print_partitions(char * label)
 	printk(KERN_WARNING "--------%s---------\n", label);
 	printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
 	list_for_each_entry(tmp_part, &nvram_partitions, partition) {
-		printk(KERN_WARNING "%4d    \t%02x\t%02x\t%d\t%12s\n",
+		printk(KERN_WARNING "%4d    \t%02x\t%02x\t%d\t%12.12s\n",
 		       tmp_part->index, tmp_part->header.signature,
 		       tmp_part->header.checksum, tmp_part->header.length,
 		       tmp_part->header.name);

arch/powerpc/kernel/signal_32.c

@@ -445,6 +445,12 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 #endif /* CONFIG_ALTIVEC */
 	if (copy_fpr_to_user(&frame->mc_fregs, current))
 		return 1;
+
+	/*
+	 * Clear the MSR VSX bit to indicate there is no valid state attached
+	 * to this context, except in the specific case below where we set it.
+	 */
+	msr &= ~MSR_VSX;
 #ifdef CONFIG_VSX
 	/*
 	 * Copy VSR 0-31 upper half from thread_struct to local
@@ -457,15 +463,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		if (copy_vsx_to_user(&frame->mc_vsregs, current))
 			return 1;
 		msr |= MSR_VSX;
-	} else if (!ctx_has_vsx_region)
-		/*
-		 * With a small context structure we can't hold the VSX
-		 * registers, hence clear the MSR value to indicate the state
-		 * was not saved.
-		 */
-		msr &= ~MSR_VSX;
-
-
+	}
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* save spe registers */

arch/powerpc/kernel/signal_64.c

@@ -122,6 +122,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	flush_fp_to_thread(current);
 	/* copy fpr regs and fpscr */
 	err |= copy_fpr_to_user(&sc->fp_regs, current);
+
+	/*
+	 * Clear the MSR VSX bit to indicate there is no valid state attached
+	 * to this context, except in the specific case below where we set it.
+	 */
+	msr &= ~MSR_VSX;
 #ifdef CONFIG_VSX
 	/*
 	 * Copy VSX low doubleword to local buffer for formatting,

arch/powerpc/kernel/vdso32/gettimeofday.S

@@ -232,9 +232,15 @@ __do_get_tspec:
 	lwz	r6,(CFG_TB_ORIG_STAMP+4)(r9)
 
 	/* Get a stable TB value */
+#ifdef CONFIG_8xx
+2:	mftbu	r3
+	mftbl	r4
+	mftbu	r0
+#else
 2:	mfspr	r3, SPRN_TBRU
 	mfspr	r4, SPRN_TBRL
 	mfspr	r0, SPRN_TBRU
+#endif
 	cmplw	cr0,r3,r0
 	bne-	2b
 

arch/powerpc/mm/hugetlbpage-book3e.c

@@ -117,6 +117,5 @@ void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 	struct hstate *hstate = hstate_file(vma->vm_file);
 	unsigned long tsize = huge_page_shift(hstate) - 10;
 
-	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
-
+	__flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0);
 }

arch/powerpc/mm/tlb_nohash.c

@@ -305,7 +305,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
 #ifdef CONFIG_HUGETLB_PAGE
-	if (is_vm_hugetlb_page(vma))
+	if (vma && is_vm_hugetlb_page(vma))
 		flush_hugetlb_page(vma, vmaddr);
 #endif
 

arch/powerpc/platforms/Kconfig.cputype

@@ -404,13 +404,27 @@ config PPC_DOORBELL
 
 endmenu
 
-config CPU_LITTLE_ENDIAN
-	bool "Build little endian kernel"
-	default n
+choice
+	prompt "Endianness selection"
+	default CPU_BIG_ENDIAN
 	help
 	  This option selects whether a big endian or little endian kernel will
 	  be built.
 
+config CPU_BIG_ENDIAN
+	bool "Build big endian kernel"
+	help
+	  Build a big endian kernel.
+
+	  If unsure, select this option.
+
+config CPU_LITTLE_ENDIAN
+	bool "Build little endian kernel"
+	help
+	  Build a little endian kernel.
+
 	  Note that if cross compiling a little endian kernel,
 	  CROSS_COMPILE must point to a toolchain capable of targeting
 	  little endian powerpc.
+
+endchoice

arch/s390/Kconfig

@@ -101,7 +101,7 @@ config S390
 	select GENERIC_CPU_DEVICES if !SMP
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_TIME_VSYSCALL_OLD
+	select GENERIC_TIME_VSYSCALL
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
 	select HAVE_ARCH_SECCOMP_FILTER

arch/s390/crypto/aes_s390.c

@@ -35,7 +35,6 @@ static u8 *ctrblk;
 static char keylen_flag;
 
 struct s390_aes_ctx {
-	u8 iv[AES_BLOCK_SIZE];
 	u8 key[AES_MAX_KEY_SIZE];
 	long enc;
 	long dec;
@@ -441,30 +440,36 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 	return aes_set_key(tfm, in_key, key_len);
 }
 
-static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param,
+static int cbc_aes_crypt(struct blkcipher_desc *desc, long func,
 			 struct blkcipher_walk *walk)
 {
+	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	int ret = blkcipher_walk_virt(desc, walk);
 	unsigned int nbytes = walk->nbytes;
+	struct {
+		u8 iv[AES_BLOCK_SIZE];
+		u8 key[AES_MAX_KEY_SIZE];
+	} param;
 
 	if (!nbytes)
 		goto out;
 
-	memcpy(param, walk->iv, AES_BLOCK_SIZE);
+	memcpy(param.iv, walk->iv, AES_BLOCK_SIZE);
+	memcpy(param.key, sctx->key, sctx->key_len);
 	do {
 		/* only use complete blocks */
 		unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
 		u8 *out = walk->dst.virt.addr;
 		u8 *in = walk->src.virt.addr;
 
-		ret = crypt_s390_kmc(func, param, out, in, n);
+		ret = crypt_s390_kmc(func, &param, out, in, n);
 		if (ret < 0 || ret != n)
 			return -EIO;
 
 		nbytes &= AES_BLOCK_SIZE - 1;
 		ret = blkcipher_walk_done(desc, walk, nbytes);
 	} while ((nbytes = walk->nbytes));
-	memcpy(walk->iv, param, AES_BLOCK_SIZE);
+	memcpy(walk->iv, param.iv, AES_BLOCK_SIZE);
 
 out:
 	return ret;
@@ -481,7 +486,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 		return fallback_blk_enc(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk);
+	return cbc_aes_crypt(desc, sctx->enc, &walk);
 }
 
 static int cbc_aes_decrypt(struct blkcipher_desc *desc,
@@ -495,7 +500,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 		return fallback_blk_dec(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk);
+	return cbc_aes_crypt(desc, sctx->dec, &walk);
 }
 
 static struct crypto_alg cbc_aes_alg = {

arch/s390/include/asm/page.h

@@ -48,33 +48,21 @@ static inline void clear_page(void *page)
 		: "memory", "cc");
 }
 
+/*
+ * copy_page uses the mvcl instruction with 0xb0 padding byte in order to
+ * bypass caches when copying a page. Especially when copying huge pages
+ * this keeps L1 and L2 data caches alive.
+ */
 static inline void copy_page(void *to, void *from)
 {
-	if (MACHINE_HAS_MVPG) {
-		register unsigned long reg0 asm ("0") = 0;
-		asm volatile(
-			"	mvpg	%0,%1"
-			: : "a" (to), "a" (from), "d" (reg0)
-			: "memory", "cc");
-	} else
-		asm volatile(
-			"	mvc	0(256,%0),0(%1)\n"
-			"	mvc	256(256,%0),256(%1)\n"
-			"	mvc	512(256,%0),512(%1)\n"
-			"	mvc	768(256,%0),768(%1)\n"
-			"	mvc	1024(256,%0),1024(%1)\n"
-			"	mvc	1280(256,%0),1280(%1)\n"
-			"	mvc	1536(256,%0),1536(%1)\n"
-			"	mvc	1792(256,%0),1792(%1)\n"
-			"	mvc	2048(256,%0),2048(%1)\n"
-			"	mvc	2304(256,%0),2304(%1)\n"
-			"	mvc	2560(256,%0),2560(%1)\n"
-			"	mvc	2816(256,%0),2816(%1)\n"
-			"	mvc	3072(256,%0),3072(%1)\n"
-			"	mvc	3328(256,%0),3328(%1)\n"
-			"	mvc	3584(256,%0),3584(%1)\n"
-			"	mvc	3840(256,%0),3840(%1)\n"
-			: : "a" (to), "a" (from) : "memory");
+	register void *reg2 asm ("2") = to;
+	register unsigned long reg3 asm ("3") = 0x1000;
+	register void *reg4 asm ("4") = from;
+	register unsigned long reg5 asm ("5") = 0xb0001000;
+	asm volatile(
+		"	mvcl	2,4"
+		: "+d" (reg2), "+d" (reg3), "+d" (reg4), "+d" (reg5)
+		: : "memory", "cc");
 }
 
 #define clear_user_page(page, vaddr, pg)	clear_page(page)

arch/s390/include/asm/vdso.h

@@ -26,8 +26,9 @@ struct vdso_data {
 	__u64 wtom_clock_nsec;		/*				0x28 */
 	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x30 */
 	__u32 tz_dsttime;		/* Type of dst correction	0x34 */
-	__u32 ectg_available;
-	__u32 ntp_mult;			/* NTP adjusted multiplier	0x3C */
+	__u32 ectg_available;		/* ECTG instruction present	0x38 */
+	__u32 tk_mult;			/* Mult. used for xtime_nsec	0x3c */
+	__u32 tk_shift;			/* Shift used for xtime_nsec	0x40 */
 };
 
 struct vdso_per_cpu_data {

arch/s390/kernel/asm-offsets.c

@@ -65,7 +65,8 @@ int main(void)
 	DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
 	DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
 	DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
-	DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
+	DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult));
+	DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift));
 	DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
 	DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
 	/* constants used by the vdso */

arch/s390/kernel/compat_signal.c

@@ -194,7 +194,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 		return -EINVAL;
 
 	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
-	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+	regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
 		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
 		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
 		(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);

arch/s390/kernel/pgm_check.S

@@ -78,7 +78,7 @@ PGM_CHECK_DEFAULT			/* 34 */
 PGM_CHECK_DEFAULT			/* 35 */
 PGM_CHECK_DEFAULT			/* 36 */
 PGM_CHECK_DEFAULT			/* 37 */
-PGM_CHECK_DEFAULT			/* 38 */
+PGM_CHECK_64BIT(do_dat_exception)	/* 38 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 39 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3a */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3b */

arch/s390/kernel/signal.c

@@ -94,7 +94,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 		return -EINVAL;
 
 	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
-	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+	regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
 		(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
 	/* Check for invalid user address space control. */
 	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)

arch/s390/kernel/time.c

@@ -108,20 +108,10 @@ static void fixup_clock_comparator(unsigned long long delta)
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-static int s390_next_ktime(ktime_t expires,
+static int s390_next_event(unsigned long delta,
 			   struct clock_event_device *evt)
 {
-	struct timespec ts;
-	u64 nsecs;
-
-	ts.tv_sec = ts.tv_nsec = 0;
-	monotonic_to_bootbased(&ts);
-	nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
-	do_div(nsecs, 125);
-	S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
-	/* Program the maximum value if we have an overflow (== year 2042) */
-	if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
-		S390_lowcore.clock_comparator = -1ULL;
+	S390_lowcore.clock_comparator = get_tod_clock() + delta;
 	set_clock_comparator(S390_lowcore.clock_comparator);
 	return 0;
 }
@@ -146,15 +136,14 @@ void init_cpu_timer(void)
 	cpu = smp_processor_id();
 	cd = &per_cpu(comparators, cpu);
 	cd->name		= "comparator";
-	cd->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_KTIME;
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
 	cd->mult		= 16777;
 	cd->shift		= 12;
 	cd->min_delta_ns	= 1;
 	cd->max_delta_ns	= LONG_MAX;
 	cd->rating		= 400;
 	cd->cpumask		= cpumask_of(cpu);
-	cd->set_next_ktime	= s390_next_ktime;
+	cd->set_next_event	= s390_next_event;
 	cd->set_mode		= s390_set_mode;
 
 	clockevents_register_device(cd);
@@ -221,21 +210,30 @@ struct clocksource * __init clocksource_default_clock(void)
 	return &clocksource_tod;
 }
 
-void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
-			struct clocksource *clock, u32 mult)
+void update_vsyscall(struct timekeeper *tk)
 {
-	if (clock != &clocksource_tod)
+	u64 nsecps;
+
+	if (tk->clock != &clocksource_tod)
 		return;
 
 	/* Make userspace gettimeofday spin until we're done. */
 	++vdso_data->tb_update_count;
 	smp_wmb();
-	vdso_data->xtime_tod_stamp = clock->cycle_last;
-	vdso_data->xtime_clock_sec = wall_time->tv_sec;
-	vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
-	vdso_data->wtom_clock_sec = wtm->tv_sec;
-	vdso_data->wtom_clock_nsec = wtm->tv_nsec;
-	vdso_data->ntp_mult = mult;
+	vdso_data->xtime_tod_stamp = tk->clock->cycle_last;
+	vdso_data->xtime_clock_sec = tk->xtime_sec;
+	vdso_data->xtime_clock_nsec = tk->xtime_nsec;
+	vdso_data->wtom_clock_sec =
+		tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
+	vdso_data->wtom_clock_nsec = tk->xtime_nsec +
+		+ (tk->wall_to_monotonic.tv_nsec << tk->shift);
+	nsecps = (u64) NSEC_PER_SEC << tk->shift;
+	while (vdso_data->wtom_clock_nsec >= nsecps) {
+		vdso_data->wtom_clock_nsec -= nsecps;
+		vdso_data->wtom_clock_sec++;
+	}
+	vdso_data->tk_mult = tk->mult;
+	vdso_data->tk_shift = tk->shift;
 	smp_wmb();
 	++vdso_data->tb_update_count;
 }

arch/s390/kernel/vdso32/clock_gettime.S

@@ -38,25 +38,26 @@ __kernel_clock_gettime:
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,2f
 	ahi	%r0,-1
-2:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
+2:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	lr	%r2,%r0
-	l	%r0,__VDSO_NTP_MULT(%r5)
+	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	3f
-	a	%r0,__VDSO_NTP_MULT(%r5)
+	a	%r0,__VDSO_TK_MULT(%r5)
 3:	alr	%r0,%r2
-	srdl	%r0,12
-	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
+	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,4f
 	ahi	%r0,1
-4:	l	%r2,__VDSO_XTIME_SEC+4(%r5)
-	al	%r0,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic */
+4:	al	%r0,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic.nsec */
 	al	%r1,__VDSO_WTOM_NSEC+4(%r5)
 	brc	12,5f
 	ahi	%r0,1
-5:	al	%r2,__VDSO_WTOM_SEC+4(%r5)
+5:	l	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srdl	%r0,0(%r2)			/*  >> tk->shift */
+	l	%r2,__VDSO_XTIME_SEC+4(%r5)
+	al	%r2,__VDSO_WTOM_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	1b
 	basr	%r5,0
@@ -86,20 +87,21 @@ __kernel_clock_gettime:
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,12f
 	ahi	%r0,-1
-12:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
+12:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	lr	%r2,%r0
-	l	%r0,__VDSO_NTP_MULT(%r5)
+	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	13f
-	a	%r0,__VDSO_NTP_MULT(%r5)
+	a	%r0,__VDSO_TK_MULT(%r5)
 13:	alr	%r0,%r2
-	srdl	%r0,12
-	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
+	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,14f
 	ahi	%r0,1
-14:	l	%r2,__VDSO_XTIME_SEC+4(%r5)
+14:	l	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srdl	%r0,0(%r2)			/*  >> tk->shift */
+	l	%r2,__VDSO_XTIME_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	11b
 	basr	%r5,0

arch/s390/kernel/vdso32/gettimeofday.S

@@ -35,15 +35,14 @@ __kernel_gettimeofday:
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,3f
 	ahi	%r0,-1
-3:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
+3:	ms	%r0,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
 	st	%r0,24(%r15)
-	l	%r0,__VDSO_NTP_MULT(%r5)
+	l	%r0,__VDSO_TK_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	4f
-	a	%r0,__VDSO_NTP_MULT(%r5)
+	a	%r0,__VDSO_TK_MULT(%r5)
 4:	al	%r0,24(%r15)
-	srdl	%r0,12
 	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
 	al	%r1,__VDSO_XTIME_NSEC+4(%r5)
 	brc	12,5f
@@ -51,6 +50,8 @@ __kernel_gettimeofday:
 5:	mvc	24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
 	cl	%r4,__VDSO_UPD_COUNT+4(%r5)	/* check update counter */
 	jne	1b
+	l	%r4,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srdl	%r0,0(%r4)			/*  >> tk->shift */
 	l	%r4,24(%r15)			/* get tv_sec from stack */
 	basr	%r5,0
 6:	ltr	%r0,%r0

arch/s390/kernel/vdso64/clock_gettime.S

@@ -34,14 +34,15 @@ __kernel_clock_gettime:
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	0b
 	stck	48(%r15)			/* Store TOD clock */
+	lgf	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* tk->xtime_sec */
+	alg	%r0,__VDSO_WTOM_SEC(%r5)	/*  + wall_to_monotonic.sec */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
-	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
-	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
-	lg	%r0,__VDSO_XTIME_SEC(%r5)
-	alg	%r1,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic */
-	alg	%r0,__VDSO_WTOM_SEC(%r5)
+	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
+	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
+	alg	%r1,__VDSO_WTOM_NSEC(%r5)	/*  + wall_to_monotonic.nsec */
+	srlg	%r1,%r1,0(%r2)			/*  >> tk->shift */
 	clg	%r4,__VDSO_UPD_COUNT(%r5)	/* check update counter */
 	jne	0b
 	larl	%r5,13f
@@ -62,12 +63,13 @@ __kernel_clock_gettime:
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	5b
 	stck	48(%r15)			/* Store TOD clock */
+	lgf	%r2,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
-	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
-	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
-	lg	%r0,__VDSO_XTIME_SEC(%r5)
+	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
+	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
+	srlg	%r1,%r1,0(%r2)			/*  >> tk->shift */
+	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* tk->xtime_sec */
 	clg	%r4,__VDSO_UPD_COUNT(%r5)	/* check update counter */
 	jne	5b
 	larl	%r5,13f

arch/s390/kernel/vdso64/gettimeofday.S

@@ -31,12 +31,13 @@ __kernel_gettimeofday:
 	stck	48(%r15)			/* Store TOD clock */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
-	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
-	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime.tv_nsec */
-	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* xtime.tv_sec */
+	msgf	%r1,__VDSO_TK_MULT(%r5)		/*  * tk->mult */
+	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + tk->xtime_nsec */
+	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* tk->xtime_sec */
 	clg	%r4,__VDSO_UPD_COUNT(%r5)	/* check update counter */
 	jne	0b
+	lgf	%r5,__VDSO_TK_SHIFT(%r5)	/* Timekeeper shift */
+	srlg	%r1,%r1,0(%r5)			/*  >> tk->shift */
 	larl	%r5,5f
 2:	clg	%r1,0(%r5)
 	jl	3f

arch/s390/lib/uaccess_pt.c

@@ -78,11 +78,14 @@ static size_t copy_in_kernel(size_t count, void __user *to,
  * contains the (negative) exception code.
  */
 #ifdef CONFIG_64BIT
+
 static unsigned long follow_table(struct mm_struct *mm,
 				  unsigned long address, int write)
 {
 	unsigned long *table = (unsigned long *)__pa(mm->pgd);
 
+	if (unlikely(address > mm->context.asce_limit - 1))
+		return -0x38UL;
 	switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
 	case _ASCE_TYPE_REGION1:
 		table = table + ((address >> 53) & 0x7ff);

arch/x86/crypto/Makefile

@@ -3,8 +3,9 @@
 #
 
 avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
+avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\
+				$(comma)4)$(comma)%ymm2,yes,no)
 
-obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o
 obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
 
 obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o

arch/x86/crypto/aesni-intel_glue.c

@@ -34,7 +34,7 @@
 #include <asm/cpu_device_id.h>
 #include <asm/i387.h>
 #include <asm/crypto/aes.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/scatterwalk.h>
 #include <crypto/internal/aead.h>
 #include <linux/workqueue.h>

arch/x86/crypto/camellia_aesni_avx2_glue.c

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/ctr.h>
 #include <crypto/lrw.h>
@@ -21,7 +22,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16

arch/x86/crypto/camellia_aesni_avx_glue.c

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/ctr.h>
 #include <crypto/lrw.h>
@@ -21,7 +22,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAMELLIA_AESNI_PARALLEL_BLOCKS 16

arch/x86/crypto/cast5_avx_glue.c

@@ -26,13 +26,13 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/cast5.h>
 #include <crypto/cryptd.h>
 #include <crypto/ctr.h>
 #include <asm/xcr.h>
 #include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAST5_PARALLEL_BLOCKS 16

arch/x86/crypto/cast6_avx_glue.c

@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/cast6.h>
 #include <crypto/cryptd.h>
@@ -37,7 +38,6 @@
 #include <crypto/xts.h>
 #include <asm/xcr.h>
 #include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define CAST6_PARALLEL_BLOCKS 8

arch/x86/crypto/serpent_avx2_glue.c

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/ctr.h>
 #include <crypto/lrw.h>
@@ -22,7 +23,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 #define SERPENT_AVX2_PARALLEL_BLOCKS 16

arch/x86/crypto/serpent_avx_glue.c

@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/serpent.h>
 #include <crypto/cryptd.h>
@@ -38,7 +39,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 /* 8-way parallel cipher functions */

arch/x86/crypto/serpent_sse2_glue.c

@@ -34,6 +34,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/serpent.h>
 #include <crypto/cryptd.h>
@@ -42,7 +43,6 @@
 #include <crypto/lrw.h>
 #include <crypto/xts.h>
 #include <asm/crypto/serpent-sse2.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 
 static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src)

arch/x86/crypto/sha256_ssse3_glue.c

@@ -281,7 +281,7 @@ static int __init sha256_ssse3_mod_init(void)
 	/* allow AVX to override SSSE3, it's a little faster */
 	if (avx_usable()) {
 #ifdef CONFIG_AS_AVX2
-		if (boot_cpu_has(X86_FEATURE_AVX2))
+		if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2))
 			sha256_transform_asm = sha256_transform_rorx;
 		else
 #endif
@@ -319,4 +319,4 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
 MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS("sha224");

arch/x86/crypto/twofish_avx_glue.c

@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/crypto.h>
 #include <linux/err.h>
+#include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <crypto/twofish.h>
 #include <crypto/cryptd.h>
@@ -39,7 +40,6 @@
 #include <asm/xcr.h>
 #include <asm/xsave.h>
 #include <asm/crypto/twofish.h>
-#include <asm/crypto/ablk_helper.h>
 #include <asm/crypto/glue_helper.h>
 #include <crypto/scatterwalk.h>
 #include <linux/workqueue.h>

arch/x86/include/asm/simd.h

@@ -0,0 +1,11 @@
+
+#include <asm/i387.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ *                instructions or access the SIMD register file
+ */
+static __must_check inline bool may_use_simd(void)
+{
+	return irq_fpu_usable();
+}

crypto/Kconfig

@@ -174,9 +174,8 @@ config CRYPTO_TEST
 	help
 	  Quick & dirty crypto test module.
 
-config CRYPTO_ABLK_HELPER_X86
+config CRYPTO_ABLK_HELPER
 	tristate
-	depends on X86
 	select CRYPTO_CRYPTD
 
 config CRYPTO_GLUE_HELPER_X86
@@ -695,7 +694,7 @@ config CRYPTO_AES_NI_INTEL
 	select CRYPTO_AES_X86_64 if 64BIT
 	select CRYPTO_AES_586 if !64BIT
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_ALGAPI
 	select CRYPTO_GLUE_HELPER_X86 if 64BIT
 	select CRYPTO_LRW
@@ -895,7 +894,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
 	depends on CRYPTO
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_CAMELLIA_X86_64
 	select CRYPTO_LRW
@@ -917,7 +916,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
 	depends on CRYPTO
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_CAMELLIA_X86_64
 	select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
@@ -969,7 +968,7 @@ config CRYPTO_CAST5_AVX_X86_64
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_CAST_COMMON
 	select CRYPTO_CAST5
 	help
@@ -992,7 +991,7 @@ config CRYPTO_CAST6_AVX_X86_64
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_CAST_COMMON
 	select CRYPTO_CAST6
@@ -1110,7 +1109,7 @@ config CRYPTO_SERPENT_SSE2_X86_64
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_LRW
@@ -1132,7 +1131,7 @@ config CRYPTO_SERPENT_SSE2_586
 	depends on X86 && !64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_LRW
@@ -1154,7 +1153,7 @@ config CRYPTO_SERPENT_AVX_X86_64
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_LRW
@@ -1176,7 +1175,7 @@ config CRYPTO_SERPENT_AVX2_X86_64
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_SERPENT
 	select CRYPTO_SERPENT_AVX_X86_64
@@ -1292,7 +1291,7 @@ config CRYPTO_TWOFISH_AVX_X86_64
 	depends on X86 && 64BIT
 	select CRYPTO_ALGAPI
 	select CRYPTO_CRYPTD
-	select CRYPTO_ABLK_HELPER_X86
+	select CRYPTO_ABLK_HELPER
 	select CRYPTO_GLUE_HELPER_X86
 	select CRYPTO_TWOFISH_COMMON
 	select CRYPTO_TWOFISH_X86_64

crypto/Makefile

@@ -2,8 +2,13 @@
 # Cryptographic API
 #
 
+# memneq MUST be built with -Os or -O0 to prevent early-return optimizations
+# that will defeat memneq's actual purpose to prevent timing attacks.
+CFLAGS_REMOVE_memneq.o := -O1 -O2 -O3
+CFLAGS_memneq.o := -Os
+
 obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-y := api.o cipher.o compress.o
+crypto-y := api.o cipher.o compress.o memneq.o
 
 obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
 
@@ -105,3 +110,4 @@ obj-$(CONFIG_XOR_BLOCKS) += xor.o
 obj-$(CONFIG_ASYNC_CORE) += async_tx/
 obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/
 obj-$(CONFIG_CRYPTO_HASH_INFO) += hash_info.o
+obj-$(CONFIG_CRYPTO_ABLK_HELPER) += ablk_helper.o

arch/x86/crypto/ablk_helper.c → crypto/ablk_helper.c

@@ -28,10 +28,11 @@
 #include <linux/crypto.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <crypto/algapi.h>
 #include <crypto/cryptd.h>
-#include <asm/i387.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
+#include <asm/simd.h>
 
 int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
 		 unsigned int key_len)
@@ -70,11 +71,11 @@ int ablk_encrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (!irq_fpu_usable()) {
+	if (!may_use_simd()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 
-		memcpy(cryptd_req, req, sizeof(*req));
+		*cryptd_req = *req;
 		ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
 
 		return crypto_ablkcipher_encrypt(cryptd_req);
@@ -89,11 +90,11 @@ int ablk_decrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (!irq_fpu_usable()) {
+	if (!may_use_simd()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 
-		memcpy(cryptd_req, req, sizeof(*req));
+		*cryptd_req = *req;
 		ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
 
 		return crypto_ablkcipher_decrypt(cryptd_req);

crypto/ablkcipher.c

@@ -16,9 +16,7 @@
 #include <crypto/internal/skcipher.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/rtnetlink.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -30,8 +28,6 @@
 
 #include "internal.h"
 
-static const char *skcipher_default_geniv __read_mostly;
-
 struct ablkcipher_buffer {
 	struct list_head	entry;
 	struct scatter_walk	dst;
@@ -527,8 +523,7 @@ const char *crypto_default_geniv(const struct crypto_alg *alg)
 	    alg->cra_blocksize)
 		return "chainiv";
 
-	return alg->cra_flags & CRYPTO_ALG_ASYNC ?
-	       "eseqiv" : skcipher_default_geniv;
+	return "eseqiv";
 }
 
 static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask)
@@ -709,17 +704,3 @@ err:
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
-
-static int __init skcipher_module_init(void)
-{
-	skcipher_default_geniv = num_possible_cpus() > 1 ?
-				 "eseqiv" : "chainiv";
-	return 0;
-}
-
-static void skcipher_module_exit(void)
-{
-}
-
-module_init(skcipher_module_init);
-module_exit(skcipher_module_exit);

crypto/ansi_cprng.c

@@ -230,11 +230,11 @@ remainder:
 	 */
 	if (byte_count < DEFAULT_BLK_SZ) {
 empty_rbuf:
-		for (; ctx->rand_data_valid < DEFAULT_BLK_SZ;
-			ctx->rand_data_valid++) {
+		while (ctx->rand_data_valid < DEFAULT_BLK_SZ) {
 			*ptr = ctx->rand_data[ctx->rand_data_valid];
 			ptr++;
 			byte_count--;
+			ctx->rand_data_valid++;
 			if (byte_count == 0)
 				goto done;
 		}

crypto/asymmetric_keys/rsa.c

@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <crypto/algapi.h>
 #include "public_key.h"
 
 MODULE_LICENSE("GPL");
@@ -189,12 +190,12 @@ static int RSA_verify(const u8 *H, const u8 *EM, size_t k, size_t hash_size,
 		}
 	}
 
-	if (memcmp(asn1_template, EM + T_offset, asn1_size) != 0) {
+	if (crypto_memneq(asn1_template, EM + T_offset, asn1_size) != 0) {
 		kleave(" = -EBADMSG [EM[T] ASN.1 mismatch]");
 		return -EBADMSG;
 	}
 
-	if (memcmp(H, EM + T_offset + asn1_size, hash_size) != 0) {
+	if (crypto_memneq(H, EM + T_offset + asn1_size, hash_size) != 0) {
 		kleave(" = -EKEYREJECTED [EM[T] hash mismatch]");
 		return -EKEYREJECTED;
 	}

crypto/asymmetric_keys/x509_public_key.c

@@ -18,59 +18,11 @@
 #include <linux/asn1_decoder.h>
 #include <keys/asymmetric-subtype.h>
 #include <keys/asymmetric-parser.h>
-#include <keys/system_keyring.h>
 #include <crypto/hash.h>
 #include "asymmetric_keys.h"
 #include "public_key.h"
 #include "x509_parser.h"
 
-/*
- * Find a key in the given keyring by issuer and authority.
- */
-static struct key *x509_request_asymmetric_key(
-	struct key *keyring,
-	const char *signer, size_t signer_len,
-	const char *authority, size_t auth_len)
-{
-	key_ref_t key;
-	char *id;
-
-	/* Construct an identifier. */
-	id = kmalloc(signer_len + 2 + auth_len + 1, GFP_KERNEL);
-	if (!id)
-		return ERR_PTR(-ENOMEM);
-
-	memcpy(id, signer, signer_len);
-	id[signer_len + 0] = ':';
-	id[signer_len + 1] = ' ';
-	memcpy(id + signer_len + 2, authority, auth_len);
-	id[signer_len + 2 + auth_len] = 0;
-
-	pr_debug("Look up: \"%s\"\n", id);
-
-	key = keyring_search(make_key_ref(keyring, 1),
-			     &key_type_asymmetric, id);
-	if (IS_ERR(key))
-		pr_debug("Request for module key '%s' err %ld\n",
-			 id, PTR_ERR(key));
-	kfree(id);
-
-	if (IS_ERR(key)) {
-		switch (PTR_ERR(key)) {
-			/* Hide some search errors */
-		case -EACCES:
-		case -ENOTDIR:
-		case -EAGAIN:
-			return ERR_PTR(-ENOKEY);
-		default:
-			return ERR_CAST(key);
-		}
-	}
-
-	pr_devel("<==%s() = 0 [%x]\n", __func__, key_serial(key_ref_to_ptr(key)));
-	return key_ref_to_ptr(key);
-}
-
 /*
  * Set up the signature parameters in an X.509 certificate.  This involves
  * digesting the signed data and extracting the signature.
@@ -150,33 +102,6 @@ int x509_check_signature(const struct public_key *pub,
 }
 EXPORT_SYMBOL_GPL(x509_check_signature);
 
-/*
- * Check the new certificate against the ones in the trust keyring.  If one of
- * those is the signing key and validates the new certificate, then mark the
- * new certificate as being trusted.
- *
- * Return 0 if the new certificate was successfully validated, 1 if we couldn't
- * find a matching parent certificate in the trusted list and an error if there
- * is a matching certificate but the signature check fails.
- */
-static int x509_validate_trust(struct x509_certificate *cert,
-			       struct key *trust_keyring)
-{
-	const struct public_key *pk;
-	struct key *key;
-	int ret = 1;
-
-	key = x509_request_asymmetric_key(trust_keyring,
-					  cert->issuer, strlen(cert->issuer),
-					  cert->authority,
-					  strlen(cert->authority));
-	if (!IS_ERR(key))  {
-		pk = key->payload.data;
-		ret = x509_check_signature(pk, cert);
-	}
-	return ret;
-}
-
 /*
  * Attempt to parse a data blob for a key as an X509 certificate.
  */
@@ -230,13 +155,9 @@ static int x509_key_preparse(struct key_preparsed_payload *prep)
 	/* Check the signature on the key if it appears to be self-signed */
 	if (!cert->authority ||
 	    strcmp(cert->fingerprint, cert->authority) == 0) {
-		ret = x509_check_signature(cert->pub, cert); /* self-signed */
+		ret = x509_check_signature(cert->pub, cert);
 		if (ret < 0)
 			goto error_free_cert;
-	} else {
-		ret = x509_validate_trust(cert, system_trusted_keyring);
-		if (!ret)
-			prep->trusted = 1;
 	}
 
 	/* Propose a description */

crypto/authenc.c

@@ -52,40 +52,52 @@ static void authenc_request_complete(struct aead_request *req, int err)
 		aead_request_complete(req, err);
 }
 
-static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
-				 unsigned int keylen)
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+			       unsigned int keylen)
 {
-	unsigned int authkeylen;
-	unsigned int enckeylen;
-	struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
-	struct crypto_ahash *auth = ctx->auth;
-	struct crypto_ablkcipher *enc = ctx->enc;
-	struct rtattr *rta = (void *)key;
+	struct rtattr *rta = (struct rtattr *)key;
 	struct crypto_authenc_key_param *param;
-	int err = -EINVAL;
 
 	if (!RTA_OK(rta, keylen))
-		goto badkey;
+		return -EINVAL;
 	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
+		return -EINVAL;
 	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
+		return -EINVAL;
 
 	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
+	keys->enckeylen = be32_to_cpu(param->enckeylen);
 
 	key += RTA_ALIGN(rta->rta_len);
 	keylen -= RTA_ALIGN(rta->rta_len);
 
-	if (keylen < enckeylen)
-		goto badkey;
+	if (keylen < keys->enckeylen)
+		return -EINVAL;
 
-	authkeylen = keylen - enckeylen;
+	keys->authkeylen = keylen - keys->enckeylen;
+	keys->authkey = key;
+	keys->enckey = key + keys->authkeylen;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(crypto_authenc_extractkeys);
+
+static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
+				 unsigned int keylen)
+{
+	struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+	struct crypto_ahash *auth = ctx->auth;
+	struct crypto_ablkcipher *enc = ctx->enc;
+	struct crypto_authenc_keys keys;
+	int err = -EINVAL;
+
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
+		goto badkey;
 
 	crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
 	crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) &
 				    CRYPTO_TFM_REQ_MASK);
-	err = crypto_ahash_setkey(auth, key, authkeylen);
+	err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
 	crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) &
 				       CRYPTO_TFM_RES_MASK);
 
@@ -95,7 +107,7 @@ static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
 	crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
 	crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc) &
 					 CRYPTO_TFM_REQ_MASK);
-	err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+	err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
 	crypto_aead_set_flags(authenc, crypto_ablkcipher_get_flags(enc) &
 				       CRYPTO_TFM_RES_MASK);
 
@@ -188,7 +200,7 @@ static void authenc_verify_ahash_update_done(struct crypto_async_request *areq,
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -227,7 +239,7 @@ static void authenc_verify_ahash_done(struct crypto_async_request *areq,
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -462,7 +474,7 @@ static int crypto_authenc_verify(struct aead_request *req,
 	ihash = ohash + authsize;
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
-	return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+	return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
 }
 
 static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,

crypto/authencesn.c

@@ -59,37 +59,19 @@ static void authenc_esn_request_complete(struct aead_request *req, int err)
 static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *key,
 				     unsigned int keylen)
 {
-	unsigned int authkeylen;
-	unsigned int enckeylen;
 	struct crypto_authenc_esn_ctx *ctx = crypto_aead_ctx(authenc_esn);
 	struct crypto_ahash *auth = ctx->auth;
 	struct crypto_ablkcipher *enc = ctx->enc;
-	struct rtattr *rta = (void *)key;
-	struct crypto_authenc_key_param *param;
+	struct crypto_authenc_keys keys;
 	int err = -EINVAL;
 
-	if (!RTA_OK(rta, keylen))
+	if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
 		goto badkey;
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-
-	if (keylen < enckeylen)
-		goto badkey;
-
-	authkeylen = keylen - enckeylen;
 
 	crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
 	crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc_esn) &
 				     CRYPTO_TFM_REQ_MASK);
-	err = crypto_ahash_setkey(auth, key, authkeylen);
+	err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
 	crypto_aead_set_flags(authenc_esn, crypto_ahash_get_flags(auth) &
 					   CRYPTO_TFM_RES_MASK);
 
@@ -99,7 +81,7 @@ static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *
 	crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
 	crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc_esn) &
 					 CRYPTO_TFM_REQ_MASK);
-	err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+	err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
 	crypto_aead_set_flags(authenc_esn, crypto_ablkcipher_get_flags(enc) &
 					   CRYPTO_TFM_RES_MASK);
 
@@ -247,7 +229,7 @@ static void authenc_esn_verify_ahash_update_done(struct crypto_async_request *ar
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -296,7 +278,7 @@ static void authenc_esn_verify_ahash_update_done2(struct crypto_async_request *a
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -336,7 +318,7 @@ static void authenc_esn_verify_ahash_done(struct crypto_async_request *areq,
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
 
-	err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+	err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
 	if (err)
 		goto out;
 
@@ -568,7 +550,7 @@ static int crypto_authenc_esn_verify(struct aead_request *req)
 	ihash = ohash + authsize;
 	scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
 				 authsize, 0);
-	return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+	return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
 }
 
 static int crypto_authenc_esn_iverify(struct aead_request *req, u8 *iv,

crypto/ccm.c

@@ -363,7 +363,7 @@ static void crypto_ccm_decrypt_done(struct crypto_async_request *areq,
 
 	if (!err) {
 		err = crypto_ccm_auth(req, req->dst, cryptlen);
-		if (!err && memcmp(pctx->auth_tag, pctx->odata, authsize))
+		if (!err && crypto_memneq(pctx->auth_tag, pctx->odata, authsize))
 			err = -EBADMSG;
 	}
 	aead_request_complete(req, err);
@@ -422,7 +422,7 @@ static int crypto_ccm_decrypt(struct aead_request *req)
 		return err;
 
 	/* verify */
-	if (memcmp(authtag, odata, authsize))
+	if (crypto_memneq(authtag, odata, authsize))
 		return -EBADMSG;
 
 	return err;

crypto/gcm.c

@@ -582,7 +582,7 @@ static int crypto_gcm_verify(struct aead_request *req,
 
 	crypto_xor(auth_tag, iauth_tag, 16);
 	scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0);
-	return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
+	return crypto_memneq(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
 }
 
 static void gcm_decrypt_done(struct crypto_async_request *areq, int err)

crypto/memneq.c

@@ -0,0 +1,138 @@
+/*
+ * Constant-time equality testing of memory regions.
+ *
+ * Authors:
+ *
+ *   James Yonan <james@openvpn.net>
+ *   Daniel Borkmann <dborkman@redhat.com>
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of OpenVPN Technologies nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <crypto/algapi.h>
+
+#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ
+
+/* Generic path for arbitrary size */
+static inline unsigned long
+__crypto_memneq_generic(const void *a, const void *b, size_t size)
+{
+	unsigned long neq = 0;
+
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+	while (size >= sizeof(unsigned long)) {
+		neq |= *(unsigned long *)a ^ *(unsigned long *)b;
+		a += sizeof(unsigned long);
+		b += sizeof(unsigned long);
+		size -= sizeof(unsigned long);
+	}
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+	while (size > 0) {
+		neq |= *(unsigned char *)a ^ *(unsigned char *)b;
+		a += 1;
+		b += 1;
+		size -= 1;
+	}
+	return neq;
+}
+
+/* Loop-free fast-path for frequently used 16-byte size */
+static inline unsigned long __crypto_memneq_16(const void *a, const void *b)
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (sizeof(unsigned long) == 8)
+		return ((*(unsigned long *)(a)   ^ *(unsigned long *)(b))
+		      | (*(unsigned long *)(a+8) ^ *(unsigned long *)(b+8)));
+	else if (sizeof(unsigned int) == 4)
+		return ((*(unsigned int *)(a)    ^ *(unsigned int *)(b))
+                      | (*(unsigned int *)(a+4)  ^ *(unsigned int *)(b+4))
+		      | (*(unsigned int *)(a+8)  ^ *(unsigned int *)(b+8))
+	              | (*(unsigned int *)(a+12) ^ *(unsigned int *)(b+12)));
+	else
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+		return ((*(unsigned char *)(a)    ^ *(unsigned char *)(b))
+		      | (*(unsigned char *)(a+1)  ^ *(unsigned char *)(b+1))
+		      | (*(unsigned char *)(a+2)  ^ *(unsigned char *)(b+2))
+		      | (*(unsigned char *)(a+3)  ^ *(unsigned char *)(b+3))
+		      | (*(unsigned char *)(a+4)  ^ *(unsigned char *)(b+4))
+		      | (*(unsigned char *)(a+5)  ^ *(unsigned char *)(b+5))
+		      | (*(unsigned char *)(a+6)  ^ *(unsigned char *)(b+6))
+		      | (*(unsigned char *)(a+7)  ^ *(unsigned char *)(b+7))
+		      | (*(unsigned char *)(a+8)  ^ *(unsigned char *)(b+8))
+		      | (*(unsigned char *)(a+9)  ^ *(unsigned char *)(b+9))
+		      | (*(unsigned char *)(a+10) ^ *(unsigned char *)(b+10))
+		      | (*(unsigned char *)(a+11) ^ *(unsigned char *)(b+11))
+		      | (*(unsigned char *)(a+12) ^ *(unsigned char *)(b+12))
+		      | (*(unsigned char *)(a+13) ^ *(unsigned char *)(b+13))
+		      | (*(unsigned char *)(a+14) ^ *(unsigned char *)(b+14))
+		      | (*(unsigned char *)(a+15) ^ *(unsigned char *)(b+15)));
+}
+
+/* Compare two areas of memory without leaking timing information,
+ * and with special optimizations for common sizes.  Users should
+ * not call this function directly, but should instead use
+ * crypto_memneq defined in crypto/algapi.h.
+ */
+noinline unsigned long __crypto_memneq(const void *a, const void *b,
+				       size_t size)
+{
+	switch (size) {
+	case 16:
+		return __crypto_memneq_16(a, b);
+	default:
+		return __crypto_memneq_generic(a, b, size);
+	}
+}
+EXPORT_SYMBOL(__crypto_memneq);
+
+#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */

drivers/acpi/acpica/acresrc.h

@@ -184,7 +184,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
 			     struct acpi_buffer *output_buffer);
 
 acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
 			     struct acpi_buffer *output_buffer);
 
 acpi_status
@@ -227,8 +227,8 @@ acpi_rs_get_list_length(u8 * aml_buffer,
 			u32 aml_buffer_length, acpi_size * size_needed);
 
 acpi_status
-acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer,
-		       acpi_size * size_needed);
+acpi_rs_get_aml_length(struct acpi_resource *resource_list,
+		       acpi_size resource_list_size, acpi_size * size_needed);
 
 acpi_status
 acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,

drivers/acpi/acpica/nsalloc.c

@@ -106,6 +106,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name)
 void acpi_ns_delete_node(struct acpi_namespace_node *node)
 {
 	union acpi_operand_object *obj_desc;
+	union acpi_operand_object *next_desc;
 
 	ACPI_FUNCTION_NAME(ns_delete_node);
 
@@ -114,12 +115,13 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node)
 	acpi_ns_detach_object(node);
 
 	/*
-	 * Delete an attached data object if present (an object that was created
-	 * and attached via acpi_attach_data). Note: After any normal object is
-	 * detached above, the only possible remaining object is a data object.
+	 * Delete an attached data object list if present (objects that were
+	 * attached via acpi_attach_data). Note: After any normal object is
+	 * detached above, the only possible remaining object(s) are data
+	 * objects, in a linked list.
 	 */
 	obj_desc = node->object;
-	if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
+	while (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
 
 		/* Invoke the attached data deletion handler if present */
 
@@ -127,7 +129,15 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node)
 			obj_desc->data.handler(node, obj_desc->data.pointer);
 		}
 
+		next_desc = obj_desc->common.next_object;
 		acpi_ut_remove_reference(obj_desc);
+		obj_desc = next_desc;
+	}
+
+	/* Special case for the statically allocated root node */
+
+	if (node == acpi_gbl_root_node) {
+		return;
 	}
 
 	/* Now we can delete the node */

drivers/acpi/acpica/nsutils.c

@@ -593,24 +593,26 @@ struct acpi_namespace_node *acpi_ns_validate_handle(acpi_handle handle)
 
 void acpi_ns_terminate(void)
 {
-	union acpi_operand_object *obj_desc;
+	acpi_status status;
 
 	ACPI_FUNCTION_TRACE(ns_terminate);
 
 	/*
-	 * 1) Free the entire namespace -- all nodes and objects
-	 *
-	 * Delete all object descriptors attached to namepsace nodes
+	 * Free the entire namespace -- all nodes and all objects
+	 * attached to the nodes
 	 */
 	acpi_ns_delete_namespace_subtree(acpi_gbl_root_node);
 
-	/* Detach any objects attached to the root */
+	/* Delete any objects attached to the root node */
 
-	obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node);
-	if (obj_desc) {
-		acpi_ns_detach_object(acpi_gbl_root_node);
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return_VOID;
 	}
 
+	acpi_ns_delete_node(acpi_gbl_root_node);
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
 	return_VOID;
 }

drivers/acpi/acpica/rscalc.c

@@ -174,6 +174,7 @@ acpi_rs_stream_option_length(u32 resource_length,
  * FUNCTION:    acpi_rs_get_aml_length
  *
  * PARAMETERS:  resource            - Pointer to the resource linked list
+ *              resource_list_size  - Size of the resource linked list
  *              size_needed         - Where the required size is returned
  *
  * RETURN:      Status
@@ -185,16 +186,20 @@ acpi_rs_stream_option_length(u32 resource_length,
  ******************************************************************************/
 
 acpi_status
-acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
+acpi_rs_get_aml_length(struct acpi_resource *resource,
+		       acpi_size resource_list_size, acpi_size * size_needed)
 {
 	acpi_size aml_size_needed = 0;
+	struct acpi_resource *resource_end;
 	acpi_rs_length total_size;
 
 	ACPI_FUNCTION_TRACE(rs_get_aml_length);
 
 	/* Traverse entire list of internal resource descriptors */
 
-	while (resource) {
+	resource_end =
+	    ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size);
+	while (resource < resource_end) {
 
 		/* Validate the descriptor type */
 

drivers/acpi/acpica/rscreate.c

@@ -418,22 +418,21 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object,
  *
  * FUNCTION:    acpi_rs_create_aml_resources
  *
- * PARAMETERS:  linked_list_buffer      - Pointer to the resource linked list
- *              output_buffer           - Pointer to the user's buffer
+ * PARAMETERS:  resource_list           - Pointer to the resource list buffer
+ *              output_buffer           - Where the AML buffer is returned
  *
  * RETURN:      Status  AE_OK if okay, else a valid acpi_status code.
  *              If the output_buffer is too small, the error will be
  *              AE_BUFFER_OVERFLOW and output_buffer->Length will point
  *              to the size buffer needed.
  *
- * DESCRIPTION: Takes the linked list of device resources and
- *              creates a bytestream to be used as input for the
- *              _SRS control method.
+ * DESCRIPTION: Converts a list of device resources to an AML bytestream
+ *              to be used as input for the _SRS control method.
  *
  ******************************************************************************/
 
 acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
 			     struct acpi_buffer *output_buffer)
 {
 	acpi_status status;
@@ -441,16 +440,16 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
 
 	ACPI_FUNCTION_TRACE(rs_create_aml_resources);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "LinkedListBuffer = %p\n",
-			  linked_list_buffer));
+	/* Params already validated, no need to re-validate here */
 
-	/*
-	 * Params already validated, so we don't re-validate here
-	 *
-	 * Pass the linked_list_buffer into a module that calculates
-	 * the buffer size needed for the byte stream.
-	 */
-	status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed);
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n",
+			  resource_list->pointer));
+
+	/* Get the buffer size needed for the AML byte stream */
+
+	status = acpi_rs_get_aml_length(resource_list->pointer,
+					resource_list->length,
+					&aml_size_needed);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n",
 			  (u32)aml_size_needed, acpi_format_exception(status)));
@@ -467,10 +466,9 @@ acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
 
 	/* Do the conversion */
 
-	status =
-	    acpi_rs_convert_resources_to_aml(linked_list_buffer,
-					     aml_size_needed,
-					     output_buffer->pointer);
+	status = acpi_rs_convert_resources_to_aml(resource_list->pointer,
+						  aml_size_needed,
+						  output_buffer->pointer);
 	if (ACPI_FAILURE(status)) {
 		return_ACPI_STATUS(status);
 	}