usbtest: Add interrupt EP testcases

Two simple test cases for interrupt endpoints are added to the usbtest.c file.
These are simple non-queued interrupt IN and interrupt OUT transfers. Currently,
only gadget zero is capable of executing the interrupt EP test cases. However,
extending the same to other gadgets is extremely simple and can be done
on-demand.

The two new tests added are
  - Test 25: To verify Interrupt OUT transfer
  - Test 26: To verify Interrupt IN transfer

Since the default value of wMaxPacketSize is set as 1024, so interrupt
IN transfers must be specified with the size parameter = multiple of
1024. Otherwise the default value (512) in the usbtest application fails
the transfer. See [RUN 4] for sample logs

The application logs (usbtest) and corresponding kernel logs are as
following:

[Run 1]
./testusb -a -c 10 -s 2048 -t 26 -v 511
usbtest 7-1:3.0: TEST 26: read 2048 bytes 10 times

[Run 2]
./testusb -a -c 10 -s 1024 -t 25 -v 511
usbtest 7-1:3.0: TEST 25: write 1024 bytes 10 times

[Run 3]
./testusb -a -c 10 -s 1098 -t 25 -v 511
usbtest 7-1:3.0: TEST 25: write 1098 bytes 10 times

[Run 4 - Failure case scenario]
./testusb -a  -t 26
unknown speed   /dev/bus/usb/007/004    0
/dev/bus/usb/007/004 test 26 --> 75 (Value too large for defined data type)

usbtest 7-1:3.0: TEST 26: read 512 bytes 1000 times
usb 7-1: test26 failed, iterations left 999, status -75 (not 0)

Signed-off-by: Amit Virdi <amit.virdi@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/misc/usbtest.c

@@ -54,6 +54,7 @@ struct usbtest_info {
 	unsigned		autoconf:1;
 	unsigned		ctrl_out:1;
 	unsigned		iso:1;		/* try iso in/out */
+	unsigned		intr:1;		/* try interrupt in/out */
 	int			alt;
 };
 
@@ -70,7 +71,10 @@ struct usbtest_dev {
 	int			out_pipe;
 	int			in_iso_pipe;
 	int			out_iso_pipe;
+	int			in_int_pipe;
+	int			out_int_pipe;
 	struct usb_endpoint_descriptor	*iso_in, *iso_out;
+	struct usb_endpoint_descriptor	*int_in, *int_out;
 	struct mutex		lock;
 
 #define TBUF_SIZE	256
@@ -101,6 +105,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 	struct usb_host_interface	*alt;
 	struct usb_host_endpoint	*in, *out;
 	struct usb_host_endpoint	*iso_in, *iso_out;
+	struct usb_host_endpoint	*int_in, *int_out;
 	struct usb_device		*udev;
 
 	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
@@ -108,6 +113,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 
 		in = out = NULL;
 		iso_in = iso_out = NULL;
+		int_in = int_out = NULL;
 		alt = intf->altsetting + tmp;
 
 		if (override_alt >= 0 &&
@@ -124,6 +130,9 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 			switch (usb_endpoint_type(&e->desc)) {
 			case USB_ENDPOINT_XFER_BULK:
 				break;
+			case USB_ENDPOINT_XFER_INT:
+				if (dev->info->intr)
+					goto try_intr;
 			case USB_ENDPOINT_XFER_ISOC:
 				if (dev->info->iso)
 					goto try_iso;
@@ -139,6 +148,15 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 					out = e;
 			}
 			continue;
+try_intr:
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (!int_in)
+					int_in = e;
+			} else {
+				if (!int_out)
+					int_out = e;
+			}
+			continue;
 try_iso:
 			if (usb_endpoint_dir_in(&e->desc)) {
 				if (!iso_in)
@@ -148,7 +166,7 @@ try_iso:
 					iso_out = e;
 			}
 		}
-		if ((in && out)  ||  iso_in || iso_out)
+		if ((in && out)  ||  iso_in || iso_out || int_in || int_out)
 			goto found;
 	}
 	return -EINVAL;
@@ -183,6 +201,20 @@ found:
 				iso_out->desc.bEndpointAddress
 					& USB_ENDPOINT_NUMBER_MASK);
 	}
+
+	if (int_in) {
+		dev->int_in = &int_in->desc;
+		dev->in_int_pipe = usb_rcvintpipe(udev,
+				int_in->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
+
+	if (int_out) {
+		dev->int_out = &int_out->desc;
+		dev->out_int_pipe = usb_sndintpipe(udev,
+				int_out->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
 	return 0;
 }
 
@@ -205,14 +237,22 @@ static struct urb *usbtest_alloc_urb(
 	int			pipe,
 	unsigned long		bytes,
 	unsigned		transfer_flags,
-	unsigned		offset)
+	unsigned		offset,
+	u8			bInterval)
 {
 	struct urb		*urb;
 
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return urb;
-	usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, simple_callback, NULL);
+
+	if (bInterval)
+		usb_fill_int_urb(urb, udev, pipe, NULL, bytes, simple_callback,
+				NULL, bInterval);
+	else
+		usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, simple_callback,
+				NULL);
+
 	urb->interval = (udev->speed == USB_SPEED_HIGH)
 			? (INTERRUPT_RATE << 3)
 			: INTERRUPT_RATE;
@@ -251,9 +291,11 @@ static struct urb *usbtest_alloc_urb(
 static struct urb *simple_alloc_urb(
 	struct usb_device	*udev,
 	int			pipe,
-	unsigned long		bytes)
+	unsigned long		bytes,
+	u8			bInterval)
 {
-	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0);
+	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0,
+			bInterval);
 }
 
 static unsigned pattern;
@@ -1255,7 +1297,7 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
 			goto cleanup;
 		}
 		req.wLength = cpu_to_le16(len);
-		urb[i] = u = simple_alloc_urb(udev, pipe, len);
+		urb[i] = u = simple_alloc_urb(udev, pipe, len, 0);
 		if (!u)
 			goto cleanup;
 
@@ -1328,7 +1370,7 @@ static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async)
 	int			retval = 0;
 
 	init_completion(&completion);
-	urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size);
+	urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size, 0);
 	if (!urb)
 		return -ENOMEM;
 	urb->context = &completion;
@@ -1616,9 +1658,9 @@ static int halt_simple(struct usbtest_dev *dev)
 	struct usb_device	*udev = testdev_to_usbdev(dev);
 
 	if (udev->speed == USB_SPEED_SUPER)
-		urb = simple_alloc_urb(udev, 0, 1024);
+		urb = simple_alloc_urb(udev, 0, 1024, 0);
 	else
-		urb = simple_alloc_urb(udev, 0, 512);
+		urb = simple_alloc_urb(udev, 0, 512, 0);
 	if (urb == NULL)
 		return -ENOMEM;
 
@@ -1962,7 +2004,7 @@ static int test_unaligned_bulk(
 {
 	int retval;
 	struct urb *urb = usbtest_alloc_urb(
-		testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1);
+		testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1, 0);
 
 	if (!urb)
 		return -ENOMEM;
@@ -2068,7 +2110,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 1:  write %d bytes %u times\n",
 				param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->out_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2083,7 +2125,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 2:  read %d bytes %u times\n",
 				param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->in_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2098,7 +2140,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 3:  write/%d 0..%d bytes %u times\n",
 				param->vary, param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->out_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2114,7 +2156,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 4:  read/%d 0..%d bytes %u times\n",
 				param->vary, param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->in_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2411,6 +2453,39 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		}
 		break;
 
+	/* Simple non-queued interrupt I/O tests */
+	case 25:
+		if (dev->out_int_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 25: write %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->out_int_pipe, param->length,
+				dev->int_out->bInterval);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE: interrupt sink (maybe accepts short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test25");
+		simple_free_urb(urb);
+		break;
+	case 26:
+		if (dev->in_int_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 26: read %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->in_int_pipe, param->length,
+				dev->int_in->bInterval);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE: interrupt source (maybe generates short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test26");
+		simple_free_urb(urb);
+		break;
 	}
 	do_gettimeofday(&param->duration);
 	param->duration.tv_sec -= start.tv_sec;
@@ -2447,6 +2522,7 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usbtest_info	*info;
 	char			*rtest, *wtest;
 	char			*irtest, *iwtest;
+	char			*intrtest, *intwtest;
 
 	udev = interface_to_usbdev(intf);
 
@@ -2487,6 +2563,7 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	 */
 	rtest = wtest = "";
 	irtest = iwtest = "";
+	intrtest = intwtest = "";
 	if (force_interrupt || udev->speed == USB_SPEED_LOW) {
 		if (info->ep_in) {
 			dev->in_pipe = usb_rcvintpipe(udev, info->ep_in);
@@ -2525,15 +2602,20 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 			irtest = " iso-in";
 		if (dev->out_iso_pipe)
 			iwtest = " iso-out";
+		if (dev->in_int_pipe)
+			intrtest = " int-in";
+		if (dev->out_int_pipe)
+			intwtest = " int-out";
 	}
 
 	usb_set_intfdata(intf, dev);
 	dev_info(&intf->dev, "%s\n", info->name);
-	dev_info(&intf->dev, "%s {control%s%s%s%s%s} tests%s\n",
+	dev_info(&intf->dev, "%s {control%s%s%s%s%s%s%s} tests%s\n",
 			usb_speed_string(udev->speed),
 			info->ctrl_out ? " in/out" : "",
 			rtest, wtest,
 			irtest, iwtest,
+			intrtest, intwtest,
 			info->alt >= 0 ? " (+alt)" : "");
 	return 0;
 }
@@ -2607,6 +2689,7 @@ static struct usbtest_info gz_info = {
 	.autoconf	= 1,
 	.ctrl_out	= 1,
 	.iso		= 1,
+	.intr		= 1,
 	.alt		= 0,
 };