Merge tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - New APM X-Gene SoC EDAC driver (Loc Ho)

 - AMD error injection module improvements (Aravind Gopalakrishnan)

 - Altera Arria 10 support (Thor Thayer)

 - misc fixes and cleanups all over the place

* tag 'edac_for_4.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (28 commits)
  EDAC: Update Documentation/edac.txt
  EDAC: Fix typos in Documentation/edac.txt
  EDAC, mce_amd_inj: Set MISCV on injection
  EDAC, mce_amd_inj: Move bit preparations before the injection
  EDAC, mce_amd_inj: Cleanup and simplify README
  EDAC, altera: Do not allow suspend when EDAC is enabled
  EDAC, mce_amd_inj: Make inj_type static
  arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support
  EDAC, altera: Add Arria10 EDAC support
  EDAC, altera: Refactor for Altera CycloneV SoC
  EDAC, altera: Generalize driver to use DT Memory size
  EDAC, mce_amd_inj: Add README file
  EDAC, mce_amd_inj: Add individual permissions field to dfs_node
  EDAC, mce_amd_inj: Modify flags attribute to use string arguments
  EDAC, mce_amd_inj: Read out number of MCE banks from the hardware
  EDAC, mce_amd_inj: Use MCE_INJECT_GET macro for bank node too
  EDAC, xgene: Fix cpuid abuse
  EDAC, mpc85xx: Extend error address to 64 bit
  EDAC, mpc8xxx: Adapt for FSL SoC
  EDAC, edac_stub: Drop arch-specific include
  ...

Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt

@@ -2,7 +2,7 @@ Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
 The EDAC accesses a range of registers in the SDRAM controller.
 
 Required properties:
-- compatible : should contain "altr,sdram-edac";
+- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10"
 - altr,sdr-syscon : phandle of the sdr module
 - interrupts : Should contain the SDRAM ECC IRQ in the
 	appropriate format for the IRQ controller.

Documentation/devicetree/bindings/edac/apm-xgene-edac.txt

@@ -0,0 +1,79 @@
+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+  memory controller	- Memory controller
+  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-edac".
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+- regmap-efuse		: Regmap of the PMD efuse resource.
+- reg			: First resource shall be the CPU bus (PCP) resource.
+- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
+			  IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible		: Shall be "apm,xgene-edac-mc".
+- reg			: First resource shall be the memory controller unit
+                          (MCU) resource.
+- memory-controller	: Instance number of the memory controller.
+
+Required properties for PMD subnode:
+- compatible		: Shall be "apm,xgene-edac-pmd" or
+                          "apm,xgene-edac-pmd-v2".
+- reg			: First resource shall be the PMD resource.
+- pmd-controller	: Instance number of the PMD controller.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "apm,xgene-csw", "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	efuse: efuse@1054a000 {
+		compatible = "apm,xgene-efuse", "syscon";
+		reg = <0x0 0x1054a000 0x0 0x20>;
+	};
+
+	edac@78800000 {
+		compatible = "apm,xgene-edac";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		regmap-csw = <&csw>;
+		regmap-mcba = <&mcba>;
+		regmap-mcbb = <&mcbb>;
+		regmap-efuse = <&efuse>;
+		reg = <0x0 0x78800000 0x0 0x100>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>,
+			     <0x0 0x27 0x4>;
+
+		edacmc@7e800000 {
+			compatible = "apm,xgene-edac-mc";
+			reg = <0x0 0x7e800000 0x0 0x1000>;
+			memory-controller = <0>;
+		};
+
+		edacpmd@7c000000 {
+			compatible = "apm,xgene-edac-pmd";
+			reg = <0x0 0x7c000000 0x0 0x200000>;
+			pmd-controller = <0>;
+		};
+	};

Documentation/edac.txt

@@ -1,53 +1,34 @@
-
-
 EDAC - Error Detection And Correction
-
-Written by Doug Thompson <dougthompson@xmission.com>
-7 Dec 2005
-17 Jul 2007	Updated
-
-(c) Mauro Carvalho Chehab
-05 Aug 2009	Nehalem interface
-
-EDAC is maintained and written by:
-
-	Doug Thompson, Dave Jiang, Dave Peterson et al,
-	original author: Thayne Harbaugh,
-
-Contact:
-	website:	bluesmoke.sourceforge.net
-	mailing list:	bluesmoke-devel@lists.sourceforge.net
+=====================================
 
 "bluesmoke" was the name for this device driver when it was "out-of-tree"
 and maintained at sourceforge.net.  When it was pushed into 2.6.16 for the
 first time, it was renamed to 'EDAC'.
 
-The bluesmoke project at sourceforge.net is now utilized as a 'staging area'
-for EDAC development, before it is sent upstream to kernel.org
-
-At the bluesmoke/EDAC project site is a series of quilt patches against
-recent kernels, stored in a SVN repository. For easier downloading, there
-is also a tarball snapshot available.
+PURPOSE
+-------
 
-============================================================================
-EDAC PURPOSE
-
-The 'edac' kernel module goal is to detect and report errors that occur
-within the computer system running under linux.
+The 'edac' kernel module's goal is to detect and report hardware errors
+that occur within the computer system running under linux.
 
 MEMORY
+------
 
-In the initial release, memory Correctable Errors (CE) and Uncorrectable
-Errors (UE) are the primary errors being harvested. These types of errors
-are harvested by the 'edac_mc' class of device.
+Memory Correctable Errors (CE) and Uncorrectable Errors (UE) are the
+primary errors being harvested. These types of errors are harvested by
+the 'edac_mc' device.
 
 Detecting CE events, then harvesting those events and reporting them,
-CAN be a predictor of future UE events.  With CE events, the system can
-continue to operate, but with less safety. Preventive maintenance and
-proactive part replacement of memory DIMMs exhibiting CEs can reduce
-the likelihood of the dreaded UE events and system 'panics'.
+*can* but must not necessarily be a predictor of future UE events. With
+CE events only, the system can and will continue to operate as no data
+has been damaged yet.
+
+However, preventive maintenance and proactive part replacement of memory
+DIMMs exhibiting CEs can reduce the likelihood of the dreaded UE events
+and system panics.
 
-NON-MEMORY
+OTHER HARDWARE ELEMENTS
+-----------------------
 
 A new feature for EDAC, the edac_device class of device, was added in
 the 2.6.23 version of the kernel.
@@ -56,70 +37,57 @@ This new device type allows for non-memory type of ECC hardware detectors
 to have their states harvested and presented to userspace via the sysfs
 interface.
 
-Some architectures have ECC detectors for L1, L2 and L3 caches, along with DMA
-engines, fabric switches, main data path switches, interconnections,
-and various other hardware data paths. If the hardware reports it, then
-a edac_device device probably can be constructed to harvest and present
-that to userspace.
+Some architectures have ECC detectors for L1, L2 and L3 caches,
+along with DMA engines, fabric switches, main data path switches,
+interconnections, and various other hardware data paths. If the hardware
+reports it, then a edac_device device probably can be constructed to
+harvest and present that to userspace.
 
 
 PCI BUS SCANNING
+----------------
 
-In addition, PCI Bus Parity and SERR Errors are scanned for on PCI devices
-in order to determine if errors are occurring on data transfers.
+In addition, PCI devices are scanned for PCI Bus Parity and SERR Errors
+in order to determine if errors are occurring during data transfers.
 
 The presence of PCI Parity errors must be examined with a grain of salt.
-There are several add-in adapters that do NOT follow the PCI specification
+There are several add-in adapters that do *not* follow the PCI specification
 with regards to Parity generation and reporting. The specification says
 the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-In the kernel there is a PCI device attribute located in sysfs that is
-checked by the EDAC PCI scanning code. If that attribute is set,
-PCI parity/error scanning is skipped for that device. The attribute
-is:
+There is a PCI device attribute located in sysfs that is checked by
+the EDAC PCI scanning code. If that attribute is set, PCI parity/error
+scanning is skipped for that device. The attribute is:
 
 	broken_parity_status
 
-as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directories for
+and is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directories for
 PCI devices.
 
-FUTURE HARDWARE SCANNING
 
-EDAC will have future error detectors that will be integrated with
-EDAC or added to it, in the following list:
-
-	MCE	Machine Check Exception
-	MCA	Machine Check Architecture
-	NMI	NMI notification of ECC errors
-	MSRs 	Machine Specific Register error cases
-	and other mechanisms.
-
-These errors are usually bus errors, ECC errors, thermal throttling
-and the like.
-
-
-============================================================================
-EDAC VERSIONING
+VERSIONING
+----------
 
 EDAC is composed of a "core" module (edac_core.ko) and several Memory
-Controller (MC) driver modules. On a given system, the CORE
-is loaded and one MC driver will be loaded. Both the CORE and
-the MC driver (or edac_device driver) have individual versions that reflect
-current release level of their respective modules.
+Controller (MC) driver modules. On a given system, the CORE is loaded
+and one MC driver will be loaded. Both the CORE and the MC driver (or
+edac_device driver) have individual versions that reflect current
+release level of their respective modules.
 
-Thus, to "report" on what version a system is running, one must report both
-the CORE's and the MC driver's versions.
+Thus, to "report" on what version a system is running, one must report
+both the CORE's and the MC driver's versions.
 
 
 LOADING
+-------
 
-If 'edac' was statically linked with the kernel then no loading is
-necessary.  If 'edac' was built as modules then simply modprobe the
-'edac' pieces that you need.  You should be able to modprobe
-hardware-specific modules and have the dependencies load the necessary core
-modules.
+If 'edac' was statically linked with the kernel then no loading
+is necessary. If 'edac' was built as modules then simply modprobe
+the 'edac' pieces that you need. You should be able to modprobe
+hardware-specific modules and have the dependencies load the necessary
+core modules.
 
 Example:
 
@@ -129,35 +97,33 @@ loads both the amd76x_edac.ko memory controller module and the edac_mc.ko
 core module.
 
 
-============================================================================
-EDAC sysfs INTERFACE
-
-EDAC presents a 'sysfs' interface for control, reporting and attribute
-reporting purposes.
+SYSFS INTERFACE
+---------------
 
-EDAC lives in the /sys/devices/system/edac directory.
+EDAC presents a 'sysfs' interface for control and reporting purposes. It
+lives in the /sys/devices/system/edac directory.
 
-Within this directory there currently reside 2 'edac' components:
+Within this directory there currently reside 2 components:
 
 	mc	memory controller(s) system
 	pci	PCI control and status system
 
 
-============================================================================
+
 Memory Controller (mc) Model
+----------------------------
 
-First a background on the memory controller's model abstracted in EDAC.
-Each 'mc' device controls a set of DIMM memory modules. These modules are
-laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
-be multiple csrows and multiple channels.
+Each 'mc' device controls a set of DIMM memory modules. These modules
+are laid out in a Chip-Select Row (csrowX) and Channel table (chX).
+There can be multiple csrows and multiple channels.
 
-Memory controllers allow for several csrows, with 8 csrows being a typical value.
-Yet, the actual number of csrows depends on the electrical "loading"
-of a given motherboard, memory controller and DIMM characteristics.
+Memory controllers allow for several csrows, with 8 csrows being a
+typical value. Yet, the actual number of csrows depends on the layout of
+a given motherboard, memory controller and DIMM characteristics.
 
-Dual channels allows for 128 bit data transfers to the CPU from memory.
-Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
-(FB-DIMMs). The following example will assume 2 channels:
+Dual channels allows for 128 bit data transfers to/from the CPU from/to
+memory. Some newer chipsets allow for more than 2 channels, like Fully
+Buffered DIMMs (FB-DIMMs). The following example will assume 2 channels:
 
 
 		Channel 0	Channel 1
@@ -179,12 +145,12 @@ for memory DIMMs:
 	DIMM_A1
 	DIMM_B1
 
-Labels for these slots are usually silk screened on the motherboard. Slots
-labeled 'A' are channel 0 in this example. Slots labeled 'B'
-are channel 1. Notice that there are two csrows possible on a
-physical DIMM. These csrows are allocated their csrow assignment
-based on the slot into which the memory DIMM is placed. Thus, when 1 DIMM
-is placed in each Channel, the csrows cross both DIMMs.
+Labels for these slots are usually silk-screened on the motherboard.
+Slots labeled 'A' are channel 0 in this example. Slots labeled 'B' are
+channel 1. Notice that there are two csrows possible on a physical DIMM.
+These csrows are allocated their csrow assignment based on the slot into
+which the memory DIMM is placed. Thus, when 1 DIMM is placed in each
+Channel, the csrows cross both DIMMs.
 
 Memory DIMMs come single or dual "ranked". A rank is a populated csrow.
 Thus, 2 single ranked DIMMs, placed in slots DIMM_A0 and DIMM_B0 above
@@ -193,8 +159,8 @@ when 2 dual ranked DIMMs are similarly placed, then both csrow0 and
 csrow1 will be populated. The pattern repeats itself for csrow2 and
 csrow3.
 
-The representation of the above is reflected in the directory tree
-in EDAC's sysfs interface. Starting in directory
+The representation of the above is reflected in the directory
+tree in EDAC's sysfs interface. Starting in directory
 /sys/devices/system/edac/mc each memory controller will be represented
 by its own 'mcX' directory, where 'X' is the index of the MC.
 
@@ -217,34 +183,35 @@ Under each 'mcX' directory each 'csrowX' is again represented by a
 		|->csrow3
 		....
 
-Notice that there is no csrow1, which indicates that csrow0 is
-composed of a single ranked DIMMs. This should also apply in both
-Channels, in order to have dual-channel mode be operational. Since
-both csrow2 and csrow3 are populated, this indicates a dual ranked
-set of DIMMs for channels 0 and 1.
+Notice that there is no csrow1, which indicates that csrow0 is composed
+of a single ranked DIMMs. This should also apply in both Channels, in
+order to have dual-channel mode be operational. Since both csrow2 and
+csrow3 are populated, this indicates a dual ranked set of DIMMs for
+channels 0 and 1.
 
 
-Within each of the 'mcX' and 'csrowX' directories are several
-EDAC control and attribute files.
+Within each of the 'mcX' and 'csrowX' directories are several EDAC
+control and attribute files.
 
-============================================================================
-'mcX' DIRECTORIES
 
+'mcX' directories
+-----------------
 
 In 'mcX' directories are EDAC control and attribute files for
 this 'X' instance of the memory controllers.
 
 For a description of the sysfs API, please see:
-	Documentation/ABI/testing/sysfs/devices-edac
+	Documentation/ABI/testing/sysfs-devices-edac
+
 
 
-============================================================================
-'csrowX' DIRECTORIES
+'csrowX' directories
+--------------------
 
-When CONFIG_EDAC_LEGACY_SYSFS is enabled, the sysfs will contain the
-csrowX directories. As this API doesn't work properly for Rambus, FB-DIMMs
-and modern Intel Memory Controllers, this is being deprecated in favor
-of dimmX directories.
+When CONFIG_EDAC_LEGACY_SYSFS is enabled, sysfs will contain the csrowX
+directories. As this API doesn't work properly for Rambus, FB-DIMMs and
+modern Intel Memory Controllers, this is being deprecated in favor of
+dimmX directories.
 
 In the 'csrowX' directories are EDAC control and attribute files for
 this 'X' instance of csrow:
@@ -265,18 +232,18 @@ Total Correctable Errors count attribute file:
 	'ce_count'
 
 	This attribute file displays the total count of correctable
-	errors that have occurred on this csrow. This
-	count is very important to examine. CEs provide early
-	indications that a DIMM is beginning to fail. This count
-	field should be monitored for non-zero values and report
-	such information to the system administrator.
+	errors that have occurred on this csrow. This count is very
+	important to examine. CEs provide early indications that a
+	DIMM is beginning to fail. This count field should be
+	monitored for non-zero values and report such information
+	to the system administrator.
 
 
 Total memory managed by this csrow attribute file:
 
 	'size_mb'
 
-	This attribute file displays, in count of megabytes, of memory
+	This attribute file displays, in count of megabytes, the memory
 	that this csrow contains.
 
 
@@ -377,11 +344,13 @@ Channel 1 DIMM Label control file:
 	motherboard specific and determination of this information
 	must occur in userland at this time.
 
-============================================================================
+
+
 SYSTEM LOGGING
+--------------
 
-If logging for UEs and CEs are enabled then system logs will have
-error notices indicating errors that have been detected:
+If logging for UEs and CEs is enabled, then system logs will contain
+information indicating that errors have been detected:
 
 EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
 channel 1 "DIMM_B1": amd76x_edac
@@ -404,24 +373,23 @@ The structure of the message is:
 	and then an optional, driver-specific message that may
 		have additional information.
 
-Both UEs and CEs with no info will lack all but memory controller,
-error type, a notice of "no info" and then an optional,
-driver-specific error message.
+Both UEs and CEs with no info will lack all but memory controller, error
+type, a notice of "no info" and then an optional, driver-specific error
+message.
 
 
-============================================================================
 PCI Bus Parity Detection
+------------------------
 
-
-On Header Type 00 devices the primary status is looked at
-for any parity error regardless of whether Parity is enabled on the
-device.  (The spec indicates parity is generated in some cases).
-On Header Type 01 bridges, the secondary status register is also
-looked at to see if parity occurred on the bus on the other side of
-the bridge.
+On Header Type 00 devices, the primary status is looked at for any
+parity error regardless of whether parity is enabled on the device or
+not. (The spec indicates parity is generated in some cases). On Header
+Type 01 bridges, the secondary status register is also looked at to see
+if parity occurred on the bus on the other side of the bridge.
 
 
 SYSFS CONFIGURATION
+-------------------
 
 Under /sys/devices/system/edac/pci are control and attribute files as follows:
 
@@ -450,8 +418,9 @@ Parity Count:
 	have been detected.
 
 
-============================================================================
+
 MODULE PARAMETERS
+-----------------
 
 Panic on UE control file:
 
@@ -516,7 +485,7 @@ Panic on PCI PARITY Error:
 	'panic_on_pci_parity'
 
 
-	This control files enables or disables panicking when a parity
+	This control file enables or disables panicking when a parity
 	error has been detected.
 
 
@@ -530,10 +499,8 @@ Panic on PCI PARITY Error:
 
 
 
-=======================================================================
-
-
-EDAC_DEVICE type of device
+EDAC device type
+----------------
 
 In the header file, edac_core.h, there is a series of edac_device structures
 and APIs for the EDAC_DEVICE.
@@ -573,6 +540,7 @@ The test_device_edac device adds at least one of its own custom control:
 The symlink points to the 'struct dev' that is registered for this edac_device.
 
 INSTANCES
+---------
 
 One or more instance directories are present. For the 'test_device_edac' case:
 
@@ -586,6 +554,7 @@ counter in deeper subdirectories.
 	ue_count	total of UE events of subdirectories
 
 BLOCKS
+------
 
 At the lowest directory level is the 'block' directory. There can be 0, 1
 or more blocks specified in each instance.
@@ -617,14 +586,15 @@ The 'test_device_edac' device adds 4 attributes and 1 control:
 				reset all the above counters.
 
 
-Use of the 'test_device_edac' driver should any others to create their own
+Use of the 'test_device_edac' driver should enable any others to create their own
 unique drivers for their hardware systems.
 
 The 'test_device_edac' sample driver is located at the
 bluesmoke.sourceforge.net project site for EDAC.
 
-=======================================================================
+
 NEHALEM USAGE OF EDAC APIs
+--------------------------
 
 This chapter documents some EXPERIMENTAL mappings for EDAC API to handle
 Nehalem EDAC driver. They will likely be changed on future versions
@@ -633,7 +603,7 @@ of the driver.
 Due to the way Nehalem exports Memory Controller data, some adjustments
 were done at i7core_edac driver. This chapter will cover those differences
 
-1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect
+1) On Nehalem, there is one Memory Controller per Quick Patch Interconnect
    (QPI). At the driver, the term "socket" means one QPI. This is
    associated with a physical CPU socket.
 
@@ -642,7 +612,7 @@ were done at i7core_edac driver. This chapter will cover those differences
    Each channel can have up to 3 DIMMs.
 
    The minimum known unity is DIMMs. There are no information about csrows.
-   As EDAC API maps the minimum unity is csrows, the driver sequencially
+   As EDAC API maps the minimum unity is csrows, the driver sequentially
    maps channel/dimm into different csrows.
 
    For example, supposing the following layout:
@@ -664,7 +634,7 @@ exports one
 
    Each QPI is exported as a different memory controller.
 
-2) Nehalem MC has the hability to generate errors. The driver implements this
+2) Nehalem MC has the ability to generate errors. The driver implements this
    functionality via some error injection nodes:
 
    For injecting a memory error, there are some sysfs nodes, under
@@ -771,5 +741,22 @@ exports one
 
    The standard error counters are generated when an mcelog error is received
    by the driver. Since, with udimm, this is counted by software, it is
-   possible that some errors could be lost. With rdimm's, they displays the
+   possible that some errors could be lost. With rdimm's, they display the
    contents of the registers
+
+CREDITS:
+========
+
+Written by Doug Thompson <dougthompson@xmission.com>
+7 Dec 2005
+17 Jul 2007	Updated
+
+(c) Mauro Carvalho Chehab
+05 Aug 2009	Nehalem interface
+
+EDAC authors/maintainers:
+
+	Doug Thompson, Dave Jiang, Dave Peterson et al,
+	Mauro Carvalho Chehab
+	Borislav Petkov
+	original author: Thayne Harbaugh

MAINTAINERS

@@ -3777,7 +3777,7 @@ S:	Maintained
 F:	drivers/edac/ie31200_edac.c
 
 EDAC-MPC85XX
-M:	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <morbidrsa@gmail.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
@@ -3804,6 +3804,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/sb_edac.c
 
+EDAC-XGENE
+APPLIED MICRO (APM) X-GENE SOC EDAC
+M:     Loc Ho <lho@apm.com>
+S:     Supported
+F:     drivers/edac/xgene_edac.c
+F:     Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+
 EDIROL UA-101/UA-1000 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -6488,14 +6495,14 @@ F:	include/linux/mtd/
 F:	include/uapi/mtd/
 
 MEN A21 WATCHDOG DRIVER
-M:	Johannes Thumshirn <johannes.thumshirn@men.de>
+M:	Johannes Thumshirn <morbidrsa@gmail.com>
 L:	linux-watchdog@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/watchdog/mena21_wdt.c
 
 MEN CHAMELEON BUS (mcb)
-M:	Johannes Thumshirn <johannes.thumshirn@men.de>
-S:	Supported
+M:	Johannes Thumshirn <morbidrsa@gmail.com>
+S:	Maintained
 F:	drivers/mcb/
 F:	include/linux/mcb.h
 

arch/arm/Kconfig

@@ -15,6 +15,8 @@ config ARM
 	select CLONE_BACKWARDS
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -253,6 +253,17 @@
 			status = "disabled";
 		};
 
+		sdr: sdr@ffc25000 {
+			compatible = "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac-a10";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 2 4>, <0 0 4>;
+		};
+
 		L2: l2-cache@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;

arch/arm/include/asm/edac.h

@@ -18,11 +18,12 @@
 #define ASM_EDAC_H
 /*
  * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
+ * Implements the per arch edac_atomic_scrub() that EDAC use for software
  * ECC scrubbing.  It reads memory and then writes back the original
  * value, allowing the hardware to detect and correct memory errors.
  */
-static inline void atomic_scrub(void *va, u32 size)
+
+static inline void edac_atomic_scrub(void *va, u32 size)
 {
 #if __LINUX_ARM_ARCH__ >= 6
 	unsigned int *virt_addr = va;

arch/arm64/Kconfig

@@ -23,6 +23,7 @@ config ARM64
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
+	select EDAC_SUPPORT
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS
 	select GENERIC_ALLOCATOR

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -396,6 +396,89 @@
 					0x0 0x1f 0x4>;
 		};
 
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+		};
+
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";

arch/mips/Kconfig

@@ -819,6 +819,7 @@ config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK

arch/mips/include/asm/edac.h

@@ -5,7 +5,7 @@
 
 /* ECC atomic, DMA, SMP and interrupt safe scrub function */
 
-static inline void atomic_scrub(void *va, u32 size)
+static inline void edac_atomic_scrub(void *va, u32 size)
 {
 	unsigned long *virt_addr = va;
 	unsigned long temp;
@@ -21,7 +21,7 @@ static inline void atomic_scrub(void *va, u32 size)
 
 		__asm__ __volatile__ (
 		"	.set	mips2					\n"
-		"1:	ll	%0, %1		# atomic_scrub		\n"
+		"1:	ll	%0, %1		# edac_atomic_scrub	\n"
 		"	addu	%0, $0					\n"
 		"	sc	%0, %1					\n"
 		"	beqz	%0, 1b					\n"

arch/powerpc/Kconfig

@@ -153,6 +153,8 @@ config PPC
 	select NO_BOOTMEM
 	select HAVE_GENERIC_RCU_GUP
 	select HAVE_PERF_EVENTS_NMI if PPC64
+	select EDAC_SUPPORT
+	select EDAC_ATOMIC_SCRUB
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN

arch/powerpc/include/asm/edac.h

@@ -12,11 +12,11 @@
 #define ASM_EDAC_H
 /*
  * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
+ * Implements the per arch edac_atomic_scrub() that EDAC use for software
  * ECC scrubbing.  It reads memory and then writes back the original
  * value, allowing the hardware to detect and correct memory errors.
  */
-static __inline__ void atomic_scrub(void *va, u32 size)
+static __inline__ void edac_atomic_scrub(void *va, u32 size)
 {
 	unsigned int *virt_addr = va;
 	unsigned int temp;

arch/tile/Kconfig

@@ -28,6 +28,7 @@ config TILE
 	select HAVE_DEBUG_STACKOVERFLOW
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_CONTEXT_TRACKING
+	select EDAC_SUPPORT
 
 # FIXME: investigate whether we need/want these options.
 #	select HAVE_IOREMAP_PROT

arch/tile/include/asm/edac.h

@@ -1,29 +0,0 @@
-/*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_EDAC_H
-#define _ASM_TILE_EDAC_H
-
-/* ECC atomic, DMA, SMP and interrupt safe scrub function */
-
-static inline void atomic_scrub(void *va, u32 size)
-{
-	/*
-	 * These is nothing to be done here because CE is
-	 * corrected by the mshim.
-	 */
-	return;
-}
-
-#endif /* _ASM_TILE_EDAC_H */

arch/x86/Kconfig

@@ -50,6 +50,8 @@ config X86
 	select CLONE_BACKWARDS			if X86_32
 	select COMPAT_OLD_SIGACTION		if IA32_EMULATION
 	select DCACHE_WORD_ACCESS
+	select EDAC_ATOMIC_SCRUB
+	select EDAC_SUPPORT
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST	if X86_64 || (X86_32 && X86_LOCAL_APIC)
 	select GENERIC_CLOCKEVENTS_MIN_ADJUST

arch/x86/include/asm/edac.h

@@ -3,7 +3,7 @@
 
 /* ECC atomic, DMA, SMP and interrupt safe scrub function */
 
-static inline void atomic_scrub(void *va, u32 size)
+static inline void edac_atomic_scrub(void *va, u32 size)
 {
 	u32 i, *virt_addr = va;
 

drivers/edac/Kconfig

@@ -2,15 +2,16 @@
 #	EDAC Kconfig
 #	Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
 #	Licensed and distributed under the GPL
-#
+
+config EDAC_ATOMIC_SCRUB
+	bool
 
 config EDAC_SUPPORT
 	bool
 
 menuconfig EDAC
 	bool "EDAC (Error Detection And Correction) reporting"
-	depends on HAS_IOMEM
-	depends on X86 || PPC || TILE || ARM || EDAC_SUPPORT
+	depends on HAS_IOMEM && EDAC_SUPPORT
 	help
 	  EDAC is designed to report errors in the core system.
 	  These are low-level errors that are reported in the CPU or
@@ -262,10 +263,10 @@ config EDAC_SBRIDGE
 
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
-	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
+	depends on EDAC_MM_EDAC && FSL_SOC
 	help
 	  Support for error detection and correction on the Freescale
-	  MPC8349, MPC8560, MPC8540, MPC8548
+	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
 
 config EDAC_MV64X60
 	tristate "Marvell MV64x60"
@@ -377,8 +378,8 @@ config EDAC_OCTEON_PCI
 	  Cavium Octeon family of SOCs.
 
 config EDAC_ALTERA_MC
-	tristate "Altera SDRAM Memory Controller EDAC"
-	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
+	bool "Altera SDRAM Memory Controller EDAC"
+	depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA
 	help
 	  Support for error detection and correction on the
 	  Altera SDRAM memory controller. Note that the
@@ -392,4 +393,11 @@ config EDAC_SYNOPSYS
 	  Support for error detection and correction on the Synopsys DDR
 	  memory controller.
 
+config EDAC_XGENE
+	tristate "APM X-Gene SoC"
+	depends on EDAC_MM_EDAC && (ARM64 || COMPILE_TEST)
+	help
+	  Support for error detection and correction on the
+	  APM X-Gene family of SOCs.
+
 endif # EDAC

drivers/edac/Makefile

@@ -68,3 +68,4 @@ obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
 
 obj-$(CONFIG_EDAC_ALTERA_MC)		+= altera_edac.o
 obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
+obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o

drivers/edac/altera_edac.c

@@ -1,5 +1,5 @@
 /*
- *  Copyright Altera Corporation (C) 2014. All rights reserved.
+ *  Copyright Altera Corporation (C) 2014-2015. All rights reserved.
  *  Copyright 2011-2012 Calxeda, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -28,113 +28,92 @@
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
+#include "altera_edac.h"
 #include "edac_core.h"
 #include "edac_module.h"
 
 #define EDAC_MOD_STR		"altera_edac"
 #define EDAC_VERSION		"1"
 
-/* SDRAM Controller CtrlCfg Register */
-#define CTLCFG_OFST             0x00
-
-/* SDRAM Controller CtrlCfg Register Bit Masks */
-#define CTLCFG_ECC_EN           0x400
-#define CTLCFG_ECC_CORR_EN      0x800
-#define CTLCFG_GEN_SB_ERR       0x2000
-#define CTLCFG_GEN_DB_ERR       0x4000
-
-#define CTLCFG_ECC_AUTO_EN	(CTLCFG_ECC_EN | \
-				 CTLCFG_ECC_CORR_EN)
-
-/* SDRAM Controller Address Width Register */
-#define DRAMADDRW_OFST          0x2C
-
-/* SDRAM Controller Address Widths Field Register */
-#define DRAMADDRW_COLBIT_MASK   0x001F
-#define DRAMADDRW_COLBIT_SHIFT  0
-#define DRAMADDRW_ROWBIT_MASK   0x03E0
-#define DRAMADDRW_ROWBIT_SHIFT  5
-#define DRAMADDRW_BANKBIT_MASK	0x1C00
-#define DRAMADDRW_BANKBIT_SHIFT 10
-#define DRAMADDRW_CSBIT_MASK	0xE000
-#define DRAMADDRW_CSBIT_SHIFT   13
-
-/* SDRAM Controller Interface Data Width Register */
-#define DRAMIFWIDTH_OFST        0x30
-
-/* SDRAM Controller Interface Data Width Defines */
-#define DRAMIFWIDTH_16B_ECC     24
-#define DRAMIFWIDTH_32B_ECC     40
-
-/* SDRAM Controller DRAM Status Register */
-#define DRAMSTS_OFST            0x38
-
-/* SDRAM Controller DRAM Status Register Bit Masks */
-#define DRAMSTS_SBEERR          0x04
-#define DRAMSTS_DBEERR          0x08
-#define DRAMSTS_CORR_DROP       0x10
-
-/* SDRAM Controller DRAM IRQ Register */
-#define DRAMINTR_OFST           0x3C
-
-/* SDRAM Controller DRAM IRQ Register Bit Masks */
-#define DRAMINTR_INTREN         0x01
-#define DRAMINTR_SBEMASK        0x02
-#define DRAMINTR_DBEMASK        0x04
-#define DRAMINTR_CORRDROPMASK   0x08
-#define DRAMINTR_INTRCLR        0x10
-
-/* SDRAM Controller Single Bit Error Count Register */
-#define SBECOUNT_OFST           0x40
-
-/* SDRAM Controller Single Bit Error Count Register Bit Masks */
-#define SBECOUNT_MASK           0x0F
-
-/* SDRAM Controller Double Bit Error Count Register */
-#define DBECOUNT_OFST           0x44
-
-/* SDRAM Controller Double Bit Error Count Register Bit Masks */
-#define DBECOUNT_MASK           0x0F
-
-/* SDRAM Controller ECC Error Address Register */
-#define ERRADDR_OFST            0x48
-
-/* SDRAM Controller ECC Error Address Register Bit Masks */
-#define ERRADDR_MASK            0xFFFFFFFF
+static const struct altr_sdram_prv_data c5_data = {
+	.ecc_ctrl_offset    = CV_CTLCFG_OFST,
+	.ecc_ctl_en_mask    = CV_CTLCFG_ECC_AUTO_EN,
+	.ecc_stat_offset    = CV_DRAMSTS_OFST,
+	.ecc_stat_ce_mask   = CV_DRAMSTS_SBEERR,
+	.ecc_stat_ue_mask   = CV_DRAMSTS_DBEERR,
+	.ecc_saddr_offset   = CV_ERRADDR_OFST,
+	.ecc_daddr_offset   = CV_ERRADDR_OFST,
+	.ecc_cecnt_offset   = CV_SBECOUNT_OFST,
+	.ecc_uecnt_offset   = CV_DBECOUNT_OFST,
+	.ecc_irq_en_offset  = CV_DRAMINTR_OFST,
+	.ecc_irq_en_mask    = CV_DRAMINTR_INTREN,
+	.ecc_irq_clr_offset = CV_DRAMINTR_OFST,
+	.ecc_irq_clr_mask   = (CV_DRAMINTR_INTRCLR | CV_DRAMINTR_INTREN),
+	.ecc_cnt_rst_offset = CV_DRAMINTR_OFST,
+	.ecc_cnt_rst_mask   = CV_DRAMINTR_INTRCLR,
+#ifdef CONFIG_EDAC_DEBUG
+	.ce_ue_trgr_offset  = CV_CTLCFG_OFST,
+	.ce_set_mask        = CV_CTLCFG_GEN_SB_ERR,
+	.ue_set_mask        = CV_CTLCFG_GEN_DB_ERR,
+#endif
+};
 
-/* Altera SDRAM Memory Controller data */
-struct altr_sdram_mc_data {
-	struct regmap *mc_vbase;
+static const struct altr_sdram_prv_data a10_data = {
+	.ecc_ctrl_offset    = A10_ECCCTRL1_OFST,
+	.ecc_ctl_en_mask    = A10_ECCCTRL1_ECC_EN,
+	.ecc_stat_offset    = A10_INTSTAT_OFST,
+	.ecc_stat_ce_mask   = A10_INTSTAT_SBEERR,
+	.ecc_stat_ue_mask   = A10_INTSTAT_DBEERR,
+	.ecc_saddr_offset   = A10_SERRADDR_OFST,
+	.ecc_daddr_offset   = A10_DERRADDR_OFST,
+	.ecc_irq_en_offset  = A10_ERRINTEN_OFST,
+	.ecc_irq_en_mask    = A10_ECC_IRQ_EN_MASK,
+	.ecc_irq_clr_offset = A10_INTSTAT_OFST,
+	.ecc_irq_clr_mask   = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
+	.ecc_cnt_rst_offset = A10_ECCCTRL1_OFST,
+	.ecc_cnt_rst_mask   = A10_ECC_CNT_RESET_MASK,
+#ifdef CONFIG_EDAC_DEBUG
+	.ce_ue_trgr_offset  = A10_DIAGINTTEST_OFST,
+	.ce_set_mask        = A10_DIAGINT_TSERRA_MASK,
+	.ue_set_mask        = A10_DIAGINT_TDERRA_MASK,
+#endif
 };
 
 static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
 {
 	struct mem_ctl_info *mci = dev_id;
 	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
-	u32 status, err_count, err_addr;
+	const struct altr_sdram_prv_data *priv = drvdata->data;
+	u32 status, err_count = 1, err_addr;
 
-	/* Error Address is shared by both SBE & DBE */
-	regmap_read(drvdata->mc_vbase, ERRADDR_OFST, &err_addr);
+	regmap_read(drvdata->mc_vbase, priv->ecc_stat_offset, &status);
 
-	regmap_read(drvdata->mc_vbase, DRAMSTS_OFST, &status);
-
-	if (status & DRAMSTS_DBEERR) {
-		regmap_read(drvdata->mc_vbase, DBECOUNT_OFST, &err_count);
+	if (status & priv->ecc_stat_ue_mask) {
+		regmap_read(drvdata->mc_vbase, priv->ecc_daddr_offset,
+			    &err_addr);
+		if (priv->ecc_uecnt_offset)
+			regmap_read(drvdata->mc_vbase, priv->ecc_uecnt_offset,
+				    &err_count);
 		panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
 		      err_count, err_addr);
 	}
-	if (status & DRAMSTS_SBEERR) {
-		regmap_read(drvdata->mc_vbase, SBECOUNT_OFST, &err_count);
+	if (status & priv->ecc_stat_ce_mask) {
+		regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
+			    &err_addr);
+		if (priv->ecc_uecnt_offset)
+			regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
+				    &err_count);
 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
 				     err_addr >> PAGE_SHIFT,
 				     err_addr & ~PAGE_MASK, 0,
 				     0, 0, -1, mci->ctl_name, "");
-	}
-
-	regmap_write(drvdata->mc_vbase,	DRAMINTR_OFST,
-		     (DRAMINTR_INTRCLR | DRAMINTR_INTREN));
+		/* Clear IRQ to resume */
+		regmap_write(drvdata->mc_vbase,	priv->ecc_irq_clr_offset,
+			     priv->ecc_irq_clr_mask);
 
-	return IRQ_HANDLED;
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
 }
 
 #ifdef CONFIG_EDAC_DEBUG
@@ -144,6 +123,7 @@ static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
 {
 	struct mem_ctl_info *mci = file->private_data;
 	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	const struct altr_sdram_prv_data *priv = drvdata->data;
 	u32 *ptemp;
 	dma_addr_t dma_handle;
 	u32 reg, read_reg;
@@ -156,8 +136,9 @@ static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
 		return -ENOMEM;
 	}
 
-	regmap_read(drvdata->mc_vbase, CTLCFG_OFST, &read_reg);
-	read_reg &= ~(CTLCFG_GEN_SB_ERR | CTLCFG_GEN_DB_ERR);
+	regmap_read(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
+		    &read_reg);
+	read_reg &= ~(priv->ce_set_mask | priv->ue_set_mask);
 
 	/* Error are injected by writing a word while the SBE or DBE
 	 * bit in the CTLCFG register is set. Reading the word will
@@ -166,20 +147,20 @@ static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
 	if (count == 3) {
 		edac_printk(KERN_ALERT, EDAC_MC,
 			    "Inject Double bit error\n");
-		regmap_write(drvdata->mc_vbase, CTLCFG_OFST,
-			     (read_reg | CTLCFG_GEN_DB_ERR));
+		regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
+			     (read_reg | priv->ue_set_mask));
 	} else {
 		edac_printk(KERN_ALERT, EDAC_MC,
 			    "Inject Single bit error\n");
-		regmap_write(drvdata->mc_vbase,	CTLCFG_OFST,
-			     (read_reg | CTLCFG_GEN_SB_ERR));
+		regmap_write(drvdata->mc_vbase,	priv->ce_ue_trgr_offset,
+			     (read_reg | priv->ce_set_mask));
 	}
 
 	ptemp[0] = 0x5A5A5A5A;
 	ptemp[1] = 0xA5A5A5A5;
 
 	/* Clear the error injection bits */
-	regmap_write(drvdata->mc_vbase,	CTLCFG_OFST, read_reg);
+	regmap_write(drvdata->mc_vbase,	priv->ce_ue_trgr_offset, read_reg);
 	/* Ensure it has been written out */
 	wmb();
 
@@ -219,50 +200,106 @@ static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
 {}
 #endif
 
-/* Get total memory size in bytes */
-static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
+/* Get total memory size from Open Firmware DTB */
+static unsigned long get_total_mem(void)
 {
-	u32 size, read_reg, row, bank, col, cs, width;
-
-	if (regmap_read(mc_vbase, DRAMADDRW_OFST, &read_reg) < 0)
-		return 0;
-
-	if (regmap_read(mc_vbase, DRAMIFWIDTH_OFST, &width) < 0)
-		return 0;
-
-	col = (read_reg & DRAMADDRW_COLBIT_MASK) >>
-		DRAMADDRW_COLBIT_SHIFT;
-	row = (read_reg & DRAMADDRW_ROWBIT_MASK) >>
-		DRAMADDRW_ROWBIT_SHIFT;
-	bank = (read_reg & DRAMADDRW_BANKBIT_MASK) >>
-		DRAMADDRW_BANKBIT_SHIFT;
-	cs = (read_reg & DRAMADDRW_CSBIT_MASK) >>
-		DRAMADDRW_CSBIT_SHIFT;
-
-	/* Correct for ECC as its not addressible */
-	if (width == DRAMIFWIDTH_32B_ECC)
-		width = 32;
-	if (width == DRAMIFWIDTH_16B_ECC)
-		width = 16;
-
-	/* calculate the SDRAM size base on this info */
-	size = 1 << (row + bank + col);
-	size = size * cs * (width / 8);
-	return size;
+	struct device_node *np = NULL;
+	const unsigned int *reg, *reg_end;
+	int len, sw, aw;
+	unsigned long start, size, total_mem = 0;
+
+	for_each_node_by_type(np, "memory") {
+		aw = of_n_addr_cells(np);
+		sw = of_n_size_cells(np);
+		reg = (const unsigned int *)of_get_property(np, "reg", &len);
+		reg_end = reg + (len / sizeof(u32));
+
+		total_mem = 0;
+		do {
+			start = of_read_number(reg, aw);
+			reg += aw;
+			size = of_read_number(reg, sw);
+			reg += sw;
+			total_mem += size;
+		} while (reg < reg_end);
+	}
+	edac_dbg(0, "total_mem 0x%lx\n", total_mem);
+	return total_mem;
+}
+
+static const struct of_device_id altr_sdram_ctrl_of_match[] = {
+	{ .compatible = "altr,sdram-edac", .data = (void *)&c5_data},
+	{ .compatible = "altr,sdram-edac-a10", .data = (void *)&a10_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
+
+static int a10_init(struct regmap *mc_vbase)
+{
+	if (regmap_update_bits(mc_vbase, A10_INTMODE_OFST,
+			       A10_INTMODE_SB_INT, A10_INTMODE_SB_INT)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error setting SB IRQ mode\n");
+		return -ENODEV;
+	}
+
+	if (regmap_write(mc_vbase, A10_SERRCNTREG_OFST, 1)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error setting trigger count\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int a10_unmask_irq(struct platform_device *pdev, u32 mask)
+{
+	void __iomem  *sm_base;
+	int  ret = 0;
+
+	if (!request_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32),
+				dev_name(&pdev->dev))) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to request mem region\n");
+		return -EBUSY;
+	}
+
+	sm_base = ioremap(A10_SYMAN_INTMASK_CLR, sizeof(u32));
+	if (!sm_base) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to ioremap device\n");
+
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	iowrite32(mask, sm_base);
+
+	iounmap(sm_base);
+
+release:
+	release_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32));
+
+	return ret;
 }
 
 static int altr_sdram_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *id;
 	struct edac_mc_layer layers[2];
 	struct mem_ctl_info *mci;
 	struct altr_sdram_mc_data *drvdata;
+	const struct altr_sdram_prv_data *priv;
 	struct regmap *mc_vbase;
 	struct dimm_info *dimm;
-	u32 read_reg, mem_size;
-	int irq;
-	int res = 0;
+	u32 read_reg;
+	int irq, irq2, res = 0;
+	unsigned long mem_size, irqflags = 0;
+
+	id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
 
-	/* Validate the SDRAM controller has ECC enabled */
 	/* Grab the register range from the sdr controller in device tree */
 	mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 						   "altr,sdr-syscon");
@@ -272,25 +309,46 @@ static int altr_sdram_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (regmap_read(mc_vbase, CTLCFG_OFST, &read_reg) ||
-	    ((read_reg & CTLCFG_ECC_AUTO_EN) !=	CTLCFG_ECC_AUTO_EN)) {
+	/* Check specific dependencies for the module */
+	priv = of_match_node(altr_sdram_ctrl_of_match,
+			     pdev->dev.of_node)->data;
+
+	/* Validate the SDRAM controller has ECC enabled */
+	if (regmap_read(mc_vbase, priv->ecc_ctrl_offset, &read_reg) ||
+	    ((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			    "No ECC/ECC disabled [0x%08X]\n", read_reg);
 		return -ENODEV;
 	}
 
 	/* Grab memory size from device tree. */
-	mem_size = altr_sdram_get_total_mem_size(mc_vbase);
+	mem_size = get_total_mem();
 	if (!mem_size) {
+		edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n");
+		return -ENODEV;
+	}
+
+	/* Ensure the SDRAM Interrupt is disabled */
+	if (regmap_update_bits(mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error disabling SDRAM ECC IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Toggle to clear the SDRAM Error count */
+	if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask,
+			       priv->ecc_cnt_rst_mask)) {
 		edac_printk(KERN_ERR, EDAC_MC,
-			    "Unable to calculate memory size\n");
+			    "Error clearing SDRAM ECC count\n");
 		return -ENODEV;
 	}
 
-	/* Ensure the SDRAM Interrupt is disabled and cleared */
-	if (regmap_write(mc_vbase, DRAMINTR_OFST, DRAMINTR_INTRCLR)) {
+	if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask, 0)) {
 		edac_printk(KERN_ERR, EDAC_MC,
-			    "Error clearing SDRAM ECC IRQ\n");
+			    "Error clearing SDRAM ECC count\n");
 		return -ENODEV;
 	}
 
@@ -301,6 +359,9 @@ static int altr_sdram_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	/* Arria10 has a 2nd IRQ */
+	irq2 = platform_get_irq(pdev, 1);
+
 	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
 	layers[0].size = 1;
 	layers[0].is_virt_csrow = true;
@@ -315,9 +376,12 @@ static int altr_sdram_probe(struct platform_device *pdev)
 	mci->pdev = &pdev->dev;
 	drvdata = mci->pvt_info;
 	drvdata->mc_vbase = mc_vbase;
+	drvdata->data = priv;
 	platform_set_drvdata(pdev, mci);
 
 	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to get managed device resource\n");
 		res = -ENOMEM;
 		goto free;
 	}
@@ -342,8 +406,32 @@ static int altr_sdram_probe(struct platform_device *pdev)
 	if (res < 0)
 		goto err;
 
+	/* Only the Arria10 has separate IRQs */
+	if (irq2 > 0) {
+		/* Arria10 specific initialization */
+		res = a10_init(mc_vbase);
+		if (res < 0)
+			goto err2;
+
+		res = devm_request_irq(&pdev->dev, irq2,
+				       altr_sdram_mc_err_handler,
+				       IRQF_SHARED, dev_name(&pdev->dev), mci);
+		if (res < 0) {
+			edac_mc_printk(mci, KERN_ERR,
+				       "Unable to request irq %d\n", irq2);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK);
+		if (res < 0)
+			goto err2;
+
+		irqflags = IRQF_SHARED;
+	}
+
 	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
-			       0, dev_name(&pdev->dev), mci);
+			       irqflags, dev_name(&pdev->dev), mci);
 	if (res < 0) {
 		edac_mc_printk(mci, KERN_ERR,
 			       "Unable to request irq %d\n", irq);
@@ -351,8 +439,9 @@ static int altr_sdram_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	if (regmap_write(drvdata->mc_vbase, DRAMINTR_OFST,
-			 (DRAMINTR_INTRCLR | DRAMINTR_INTREN))) {
+	/* Infrastructure ready - enable the IRQ */
+	if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) {
 		edac_mc_printk(mci, KERN_ERR,
 			       "Error enabling SDRAM ECC IRQ\n");
 		res = -ENODEV;
@@ -388,17 +477,31 @@ static int altr_sdram_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id altr_sdram_ctrl_of_match[] = {
-	{ .compatible = "altr,sdram-edac", },
-	{},
+/*
+ * If you want to suspend, need to disable EDAC by removing it
+ * from the device tree or defconfig.
+ */
+#ifdef CONFIG_PM
+static int altr_sdram_prepare(struct device *dev)
+{
+	pr_err("Suspend not allowed when EDAC is enabled.\n");
+
+	return -EPERM;
+}
+
+static const struct dev_pm_ops altr_sdram_pm_ops = {
+	.prepare = altr_sdram_prepare,
 };
-MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
+#endif
 
 static struct platform_driver altr_sdram_edac_driver = {
 	.probe = altr_sdram_probe,
 	.remove = altr_sdram_remove,
 	.driver = {
 		.name = "altr_sdram_edac",
+#ifdef CONFIG_PM
+		.pm = &altr_sdram_pm_ops,
+#endif
 		.of_match_table = altr_sdram_ctrl_of_match,
 	},
 };

drivers/edac/altera_edac.h

@@ -0,0 +1,201 @@
+/*
+ *
+ * Copyright (C) 2015 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ALTERA_EDAC_H
+#define _ALTERA_EDAC_H
+
+#include <linux/edac.h>
+#include <linux/types.h>
+
+/* SDRAM Controller CtrlCfg Register */
+#define CV_CTLCFG_OFST             0x00
+
+/* SDRAM Controller CtrlCfg Register Bit Masks */
+#define CV_CTLCFG_ECC_EN           0x400
+#define CV_CTLCFG_ECC_CORR_EN      0x800
+#define CV_CTLCFG_GEN_SB_ERR       0x2000
+#define CV_CTLCFG_GEN_DB_ERR       0x4000
+
+#define CV_CTLCFG_ECC_AUTO_EN     (CV_CTLCFG_ECC_EN | \
+				   CV_CTLCFG_ECC_CORR_EN)
+
+/* SDRAM Controller Address Width Register */
+#define CV_DRAMADDRW_OFST          0x2C
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK      0x001F
+#define DRAMADDRW_COLBIT_SHIFT     0
+#define DRAMADDRW_ROWBIT_MASK      0x03E0
+#define DRAMADDRW_ROWBIT_SHIFT     5
+#define CV_DRAMADDRW_BANKBIT_MASK  0x1C00
+#define CV_DRAMADDRW_BANKBIT_SHIFT 10
+#define CV_DRAMADDRW_CSBIT_MASK    0xE000
+#define CV_DRAMADDRW_CSBIT_SHIFT   13
+
+/* SDRAM Controller Interface Data Width Register */
+#define CV_DRAMIFWIDTH_OFST        0x30
+
+/* SDRAM Controller Interface Data Width Defines */
+#define CV_DRAMIFWIDTH_16B_ECC     24
+#define CV_DRAMIFWIDTH_32B_ECC     40
+
+/* SDRAM Controller DRAM Status Register */
+#define CV_DRAMSTS_OFST            0x38
+
+/* SDRAM Controller DRAM Status Register Bit Masks */
+#define CV_DRAMSTS_SBEERR          0x04
+#define CV_DRAMSTS_DBEERR          0x08
+#define CV_DRAMSTS_CORR_DROP       0x10
+
+/* SDRAM Controller DRAM IRQ Register */
+#define CV_DRAMINTR_OFST           0x3C
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define CV_DRAMINTR_INTREN         0x01
+#define CV_DRAMINTR_SBEMASK        0x02
+#define CV_DRAMINTR_DBEMASK        0x04
+#define CV_DRAMINTR_CORRDROPMASK   0x08
+#define CV_DRAMINTR_INTRCLR        0x10
+
+/* SDRAM Controller Single Bit Error Count Register */
+#define CV_SBECOUNT_OFST           0x40
+
+/* SDRAM Controller Double Bit Error Count Register */
+#define CV_DBECOUNT_OFST           0x44
+
+/* SDRAM Controller ECC Error Address Register */
+#define CV_ERRADDR_OFST            0x48
+
+/*-----------------------------------------*/
+
+/* SDRAM Controller EccCtrl Register */
+#define A10_ECCCTRL1_OFST          0x00
+
+/* SDRAM Controller EccCtrl Register Bit Masks */
+#define A10_ECCCTRL1_ECC_EN        0x001
+#define A10_ECCCTRL1_CNT_RST       0x010
+#define A10_ECCCTRL1_AWB_CNT_RST   0x100
+#define A10_ECC_CNT_RESET_MASK     (A10_ECCCTRL1_CNT_RST | \
+				    A10_ECCCTRL1_AWB_CNT_RST)
+
+/* SDRAM Controller Address Width Register */
+#define CV_DRAMADDRW               0xFFC2502C
+#define A10_DRAMADDRW              0xFFCFA0A8
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK      0x001F
+#define DRAMADDRW_COLBIT_SHIFT     0
+#define DRAMADDRW_ROWBIT_MASK      0x03E0
+#define DRAMADDRW_ROWBIT_SHIFT     5
+#define CV_DRAMADDRW_BANKBIT_MASK  0x1C00
+#define CV_DRAMADDRW_BANKBIT_SHIFT 10
+#define CV_DRAMADDRW_CSBIT_MASK    0xE000
+#define CV_DRAMADDRW_CSBIT_SHIFT   13
+
+#define A10_DRAMADDRW_BANKBIT_MASK  0x3C00
+#define A10_DRAMADDRW_BANKBIT_SHIFT 10
+#define A10_DRAMADDRW_GRPBIT_MASK   0xC000
+#define A10_DRAMADDRW_GRPBIT_SHIFT  14
+#define A10_DRAMADDRW_CSBIT_MASK    0x70000
+#define A10_DRAMADDRW_CSBIT_SHIFT   16
+
+/* SDRAM Controller Interface Data Width Register */
+#define CV_DRAMIFWIDTH             0xFFC25030
+#define A10_DRAMIFWIDTH            0xFFCFB008
+
+/* SDRAM Controller Interface Data Width Defines */
+#define CV_DRAMIFWIDTH_16B_ECC     24
+#define CV_DRAMIFWIDTH_32B_ECC     40
+
+#define A10_DRAMIFWIDTH_16B        0x0
+#define A10_DRAMIFWIDTH_32B        0x1
+#define A10_DRAMIFWIDTH_64B        0x2
+
+/* SDRAM Controller DRAM IRQ Register */
+#define A10_ERRINTEN_OFST          0x10
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define A10_ERRINTEN_SERRINTEN     0x01
+#define A10_ERRINTEN_DERRINTEN     0x02
+#define A10_ECC_IRQ_EN_MASK        (A10_ERRINTEN_SERRINTEN | \
+				    A10_ERRINTEN_DERRINTEN)
+
+/* SDRAM Interrupt Mode Register */
+#define A10_INTMODE_OFST           0x1C
+#define A10_INTMODE_SB_INT         1
+
+/* SDRAM Controller Error Status Register */
+#define A10_INTSTAT_OFST           0x20
+
+/* SDRAM Controller Error Status Register Bit Masks */
+#define A10_INTSTAT_SBEERR         0x01
+#define A10_INTSTAT_DBEERR         0x02
+
+/* SDRAM Controller ECC Error Address Register */
+#define A10_DERRADDR_OFST          0x2C
+#define A10_SERRADDR_OFST          0x30
+
+/* SDRAM Controller ECC Diagnostic Register */
+#define A10_DIAGINTTEST_OFST       0x24
+
+#define A10_DIAGINT_TSERRA_MASK    0x0001
+#define A10_DIAGINT_TDERRA_MASK    0x0100
+
+#define A10_SBERR_IRQ              34
+#define A10_DBERR_IRQ              32
+
+/* SDRAM Single Bit Error Count Compare Set Register */
+#define A10_SERRCNTREG_OFST        0x3C
+
+#define A10_SYMAN_INTMASK_CLR      0xFFD06098
+#define A10_INTMASK_CLR_OFST       0x10
+#define A10_DDR0_IRQ_MASK          BIT(17)
+
+struct altr_sdram_prv_data {
+	int ecc_ctrl_offset;
+	int ecc_ctl_en_mask;
+	int ecc_cecnt_offset;
+	int ecc_uecnt_offset;
+	int ecc_stat_offset;
+	int ecc_stat_ce_mask;
+	int ecc_stat_ue_mask;
+	int ecc_saddr_offset;
+	int ecc_daddr_offset;
+	int ecc_irq_en_offset;
+	int ecc_irq_en_mask;
+	int ecc_irq_clr_offset;
+	int ecc_irq_clr_mask;
+	int ecc_cnt_rst_offset;
+	int ecc_cnt_rst_mask;
+#ifdef CONFIG_EDAC_DEBUG
+	struct edac_dev_sysfs_attribute *eccmgr_sysfs_attr;
+	int ecc_enable_mask;
+	int ce_set_mask;
+	int ue_set_mask;
+	int ce_ue_trgr_offset;
+#endif
+};
+
+/* Altera SDRAM Memory Controller data */
+struct altr_sdram_mc_data {
+	struct regmap *mc_vbase;
+	int sb_irq;
+	int db_irq;
+	const struct altr_sdram_prv_data *data;
+};
+
+#endif	/* #ifndef _ALTERA_EDAC_H */

drivers/edac/edac_mc.c

@@ -30,11 +30,16 @@
 #include <linux/bitops.h>
 #include <asm/uaccess.h>
 #include <asm/page.h>
-#include <asm/edac.h>
 #include "edac_core.h"
 #include "edac_module.h"
 #include <ras/ras_event.h>
 
+#ifdef CONFIG_EDAC_ATOMIC_SCRUB
+#include <asm/edac.h>
+#else
+#define edac_atomic_scrub(va, size) do { } while (0)
+#endif
+
 /* lock to memory controller's control array */
 static DEFINE_MUTEX(mem_ctls_mutex);
 static LIST_HEAD(mc_devices);
@@ -874,7 +879,7 @@ static void edac_mc_scrub_block(unsigned long page, unsigned long offset,
 	virt_addr = kmap_atomic(pg);
 
 	/* Perform architecture specific atomic scrub operation */
-	atomic_scrub(virt_addr + offset, size);
+	edac_atomic_scrub(virt_addr + offset, size);
 
 	/* Unmap and complete */
 	kunmap_atomic(virt_addr);

drivers/edac/edac_stub.c

@@ -16,7 +16,6 @@
 #include <linux/edac.h>
 #include <linux/atomic.h>
 #include <linux/device.h>
-#include <asm/edac.h>
 
 int edac_op_state = EDAC_OPSTATE_INVAL;
 EXPORT_SYMBOL_GPL(edac_op_state);

drivers/edac/mce_amd_inj.c

@@ -15,6 +15,8 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
 #include <asm/mce.h>
 
 #include "mce_amd.h"
@@ -25,6 +27,25 @@
 static struct mce i_mce;
 static struct dentry *dfs_inj;
 
+static u8 n_banks;
+
+#define MAX_FLAG_OPT_SIZE	3
+
+enum injection_type {
+	SW_INJ = 0,	/* SW injection, simply decode the error */
+	HW_INJ,		/* Trigger a #MC */
+	N_INJ_TYPES,
+};
+
+static const char * const flags_options[] = {
+	[SW_INJ] = "sw",
+	[HW_INJ] = "hw",
+	NULL
+};
+
+/* Set default injection to SW_INJ */
+static enum injection_type inj_type = SW_INJ;
+
 #define MCE_INJECT_SET(reg)						\
 static int inj_##reg##_set(void *data, u64 val)				\
 {									\
@@ -79,24 +100,66 @@ static int toggle_hw_mce_inject(unsigned int cpu, bool enable)
 	return err;
 }
 
-static int flags_get(void *data, u64 *val)
+static int __set_inj(const char *buf)
 {
-	struct mce *m = (struct mce *)data;
+	int i;
 
-	*val = m->inject_flags;
+	for (i = 0; i < N_INJ_TYPES; i++) {
+		if (!strncmp(flags_options[i], buf, strlen(flags_options[i]))) {
+			inj_type = i;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
 
-	return 0;
+static ssize_t flags_read(struct file *filp, char __user *ubuf,
+			  size_t cnt, loff_t *ppos)
+{
+	char buf[MAX_FLAG_OPT_SIZE];
+	int n;
+
+	n = sprintf(buf, "%s\n", flags_options[inj_type]);
+
+	return simple_read_from_buffer(ubuf, cnt, ppos, buf, n);
 }
 
-static int flags_set(void *data, u64 val)
+static ssize_t flags_write(struct file *filp, const char __user *ubuf,
+			   size_t cnt, loff_t *ppos)
 {
-	struct mce *m = (struct mce *)data;
+	char buf[MAX_FLAG_OPT_SIZE], *__buf;
+	int err;
+	size_t ret;
 
-	m->inject_flags = (u8)val;
-	return 0;
+	if (cnt > MAX_FLAG_OPT_SIZE)
+		cnt = MAX_FLAG_OPT_SIZE;
+
+	ret = cnt;
+
+	if (copy_from_user(&buf, ubuf, cnt))
+		return -EFAULT;
+
+	buf[cnt - 1] = 0;
+
+	/* strip whitespace */
+	__buf = strstrip(buf);
+
+	err = __set_inj(__buf);
+	if (err) {
+		pr_err("%s: Invalid flags value: %s\n", __func__, __buf);
+		return err;
+	}
+
+	*ppos += ret;
+
+	return ret;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(flags_fops, flags_get, flags_set, "%llu\n");
+static const struct file_operations flags_fops = {
+	.read           = flags_read,
+	.write          = flags_write,
+	.llseek         = generic_file_llseek,
+};
 
 /*
  * On which CPU to inject?
@@ -128,21 +191,24 @@ static void do_inject(void)
 	unsigned int cpu = i_mce.extcpu;
 	u8 b = i_mce.bank;
 
-	if (!(i_mce.inject_flags & MCJ_EXCEPTION)) {
+	if (i_mce.misc)
+		i_mce.status |= MCI_STATUS_MISCV;
+
+	if (inj_type == SW_INJ) {
 		amd_decode_mce(NULL, 0, &i_mce);
 		return;
 	}
 
-	get_online_cpus();
-	if (!cpu_online(cpu))
-		goto err;
-
 	/* prep MCE global settings for the injection */
 	mcg_status = MCG_STATUS_MCIP | MCG_STATUS_EIPV;
 
 	if (!(i_mce.status & MCI_STATUS_PCC))
 		mcg_status |= MCG_STATUS_RIPV;
 
+	get_online_cpus();
+	if (!cpu_online(cpu))
+		goto err;
+
 	toggle_hw_mce_inject(cpu, true);
 
 	wrmsr_on_cpu(cpu, MSR_IA32_MCG_STATUS,
@@ -174,11 +240,9 @@ static int inj_bank_set(void *data, u64 val)
 {
 	struct mce *m = (struct mce *)data;
 
-	if (val > 5) {
-		if (boot_cpu_data.x86 != 0x15 || val > 6) {
-			pr_err("Non-existent MCE bank: %llu\n", val);
-			return -EINVAL;
-		}
+	if (val >= n_banks) {
+		pr_err("Non-existent MCE bank: %llu\n", val);
+		return -EINVAL;
 	}
 
 	m->bank = val;
@@ -187,32 +251,81 @@ static int inj_bank_set(void *data, u64 val)
 	return 0;
 }
 
-static int inj_bank_get(void *data, u64 *val)
-{
-	struct mce *m = (struct mce *)data;
+MCE_INJECT_GET(bank);
 
-	*val = m->bank;
-	return 0;
+DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
+
+static const char readme_msg[] =
+"Description of the files and their usages:\n"
+"\n"
+"Note1: i refers to the bank number below.\n"
+"Note2: See respective BKDGs for the exact bit definitions of the files below\n"
+"as they mirror the hardware registers.\n"
+"\n"
+"status:\t Set MCi_STATUS: the bits in that MSR control the error type and\n"
+"\t attributes of the error which caused the MCE.\n"
+"\n"
+"misc:\t Set MCi_MISC: provide auxiliary info about the error. It is mostly\n"
+"\t used for error thresholding purposes and its validity is indicated by\n"
+"\t MCi_STATUS[MiscV].\n"
+"\n"
+"addr:\t Error address value to be written to MCi_ADDR. Log address information\n"
+"\t associated with the error.\n"
+"\n"
+"cpu:\t The CPU to inject the error on.\n"
+"\n"
+"bank:\t Specify the bank you want to inject the error into: the number of\n"
+"\t banks in a processor varies and is family/model-specific, therefore, the\n"
+"\t supplied value is sanity-checked. Setting the bank value also triggers the\n"
+"\t injection.\n"
+"\n"
+"flags:\t Injection type to be performed. Writing to this file will trigger a\n"
+"\t real machine check, an APIC interrupt or invoke the error decoder routines\n"
+"\t for AMD processors.\n"
+"\n"
+"\t Allowed error injection types:\n"
+"\t  - \"sw\": Software error injection. Decode error to a human-readable \n"
+"\t    format only. Safe to use.\n"
+"\t  - \"hw\": Hardware error injection. Causes the #MC exception handler to \n"
+"\t    handle the error. Be warned: might cause system panic if MCi_STATUS[PCC] \n"
+"\t    is set. Therefore, consider setting (debugfs_mountpoint)/mce/fake_panic \n"
+"\t    before injecting.\n"
+"\n";
+
+static ssize_t
+inj_readme_read(struct file *filp, char __user *ubuf,
+		       size_t cnt, loff_t *ppos)
+{
+	return simple_read_from_buffer(ubuf, cnt, ppos,
+					readme_msg, strlen(readme_msg));
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
+static const struct file_operations readme_fops = {
+	.read		= inj_readme_read,
+};
 
 static struct dfs_node {
 	char *name;
 	struct dentry *d;
 	const struct file_operations *fops;
+	umode_t perm;
 } dfs_fls[] = {
-	{ .name = "status",	.fops = &status_fops },
-	{ .name = "misc",	.fops = &misc_fops },
-	{ .name = "addr",	.fops = &addr_fops },
-	{ .name = "bank",	.fops = &bank_fops },
-	{ .name = "flags",	.fops = &flags_fops },
-	{ .name = "cpu",	.fops = &extcpu_fops },
+	{ .name = "status",	.fops = &status_fops, .perm = S_IRUSR | S_IWUSR },
+	{ .name = "misc",	.fops = &misc_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "addr",	.fops = &addr_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "bank",	.fops = &bank_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "flags",	.fops = &flags_fops,  .perm = S_IRUSR | S_IWUSR },
+	{ .name = "cpu",	.fops = &extcpu_fops, .perm = S_IRUSR | S_IWUSR },
+	{ .name = "README",	.fops = &readme_fops, .perm = S_IRUSR | S_IRGRP | S_IROTH },
 };
 
 static int __init init_mce_inject(void)
 {
 	int i;
+	u64 cap;
+
+	rdmsrl(MSR_IA32_MCG_CAP, cap);
+	n_banks = cap & MCG_BANKCNT_MASK;
 
 	dfs_inj = debugfs_create_dir("mce-inject", NULL);
 	if (!dfs_inj)
@@ -220,7 +333,7 @@ static int __init init_mce_inject(void)
 
 	for (i = 0; i < ARRAY_SIZE(dfs_fls); i++) {
 		dfs_fls[i].d = debugfs_create_file(dfs_fls[i].name,
-						    S_IRUSR | S_IWUSR,
+						    dfs_fls[i].perm,
 						    dfs_inj,
 						    &i_mce,
 						    dfs_fls[i].fops);

drivers/edac/mpc85xx_edac.c

@@ -811,6 +811,8 @@ static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc,
 	}
 }
 
+#define make64(high, low) (((u64)(high) << 32) | (low))
+
 static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 {
 	struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
@@ -818,7 +820,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	u32 bus_width;
 	u32 err_detect;
 	u32 syndrome;
-	u32 err_addr;
+	u64 err_addr;
 	u32 pfn;
 	int row_index;
 	u32 cap_high;
@@ -849,7 +851,9 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	else
 		syndrome &= 0xffff;
 
-	err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS);
+	err_addr = make64(
+		in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_EXT_ADDRESS),
+		in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS));
 	pfn = err_addr >> PAGE_SHIFT;
 
 	for (row_index = 0; row_index < mci->nr_csrows; row_index++) {
@@ -886,7 +890,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
 	mpc85xx_mc_printk(mci, KERN_ERR,
 			"Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
 			cap_high, cap_low, syndrome);
-	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8x\n", err_addr);
+	mpc85xx_mc_printk(mci, KERN_ERR, "Err addr: %#8.8llx\n", err_addr);
 	mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
 
 	/* we are out of range */

drivers/edac/mpc85xx_edac.h

@@ -43,6 +43,7 @@
 #define MPC85XX_MC_ERR_INT_EN		0x0e48
 #define MPC85XX_MC_CAPTURE_ATRIBUTES	0x0e4c
 #define MPC85XX_MC_CAPTURE_ADDRESS	0x0e50
+#define MPC85XX_MC_CAPTURE_EXT_ADDRESS	0x0e54
 #define MPC85XX_MC_ERR_SBE		0x0e58
 
 #define DSC_MEM_EN	0x80000000

drivers/edac/xgene_edac.c

@@ -0,0 +1,1215 @@
+/*
+ * APM X-Gene SoC EDAC (error detection and correction)
+ *
+ * Copyright (c) 2015, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ *         Loc Ho <lho@apm.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include "edac_core.h"
+
+#define EDAC_MOD_STR			"xgene_edac"
+
+/* Global error configuration status registers (CSR) */
+#define PCPHPERRINTSTS			0x0000
+#define PCPHPERRINTMSK			0x0004
+#define  MCU_CTL_ERR_MASK		BIT(12)
+#define  IOB_PA_ERR_MASK		BIT(11)
+#define  IOB_BA_ERR_MASK		BIT(10)
+#define  IOB_XGIC_ERR_MASK		BIT(9)
+#define  IOB_RB_ERR_MASK		BIT(8)
+#define  L3C_UNCORR_ERR_MASK		BIT(5)
+#define  MCU_UNCORR_ERR_MASK		BIT(4)
+#define  PMD3_MERR_MASK			BIT(3)
+#define  PMD2_MERR_MASK			BIT(2)
+#define  PMD1_MERR_MASK			BIT(1)
+#define  PMD0_MERR_MASK			BIT(0)
+#define PCPLPERRINTSTS			0x0008
+#define PCPLPERRINTMSK			0x000C
+#define  CSW_SWITCH_TRACE_ERR_MASK	BIT(2)
+#define  L3C_CORR_ERR_MASK		BIT(1)
+#define  MCU_CORR_ERR_MASK		BIT(0)
+#define MEMERRINTSTS			0x0010
+#define MEMERRINTMSK			0x0014
+
+struct xgene_edac {
+	struct device		*dev;
+	struct regmap		*csw_map;
+	struct regmap		*mcba_map;
+	struct regmap		*mcbb_map;
+	struct regmap		*efuse_map;
+	void __iomem		*pcp_csr;
+	spinlock_t		lock;
+	struct dentry		*dfs;
+
+	struct list_head	mcus;
+	struct list_head	pmds;
+
+	struct mutex		mc_lock;
+	int			mc_active_mask;
+	int			mc_registered_mask;
+};
+
+static void xgene_edac_pcp_rd(struct xgene_edac *edac, u32 reg, u32 *val)
+{
+	*val = readl(edac->pcp_csr + reg);
+}
+
+static void xgene_edac_pcp_clrbits(struct xgene_edac *edac, u32 reg,
+				   u32 bits_mask)
+{
+	u32 val;
+
+	spin_lock(&edac->lock);
+	val = readl(edac->pcp_csr + reg);
+	val &= ~bits_mask;
+	writel(val, edac->pcp_csr + reg);
+	spin_unlock(&edac->lock);
+}
+
+static void xgene_edac_pcp_setbits(struct xgene_edac *edac, u32 reg,
+				   u32 bits_mask)
+{
+	u32 val;
+
+	spin_lock(&edac->lock);
+	val = readl(edac->pcp_csr + reg);
+	val |= bits_mask;
+	writel(val, edac->pcp_csr + reg);
+	spin_unlock(&edac->lock);
+}
+
+/* Memory controller error CSR */
+#define MCU_MAX_RANK			8
+#define MCU_RANK_STRIDE			0x40
+
+#define MCUGECR				0x0110
+#define  MCU_GECR_DEMANDUCINTREN_MASK	BIT(0)
+#define  MCU_GECR_BACKUCINTREN_MASK	BIT(1)
+#define  MCU_GECR_CINTREN_MASK		BIT(2)
+#define  MUC_GECR_MCUADDRERREN_MASK	BIT(9)
+#define MCUGESR				0x0114
+#define  MCU_GESR_ADDRNOMATCH_ERR_MASK	BIT(7)
+#define  MCU_GESR_ADDRMULTIMATCH_ERR_MASK	BIT(6)
+#define  MCU_GESR_PHYP_ERR_MASK		BIT(3)
+#define MCUESRR0			0x0314
+#define  MCU_ESRR_MULTUCERR_MASK	BIT(3)
+#define  MCU_ESRR_BACKUCERR_MASK	BIT(2)
+#define  MCU_ESRR_DEMANDUCERR_MASK	BIT(1)
+#define  MCU_ESRR_CERR_MASK		BIT(0)
+#define MCUESRRA0			0x0318
+#define MCUEBLRR0			0x031c
+#define  MCU_EBLRR_ERRBANK_RD(src)	(((src) & 0x00000007) >> 0)
+#define MCUERCRR0			0x0320
+#define  MCU_ERCRR_ERRROW_RD(src)	(((src) & 0xFFFF0000) >> 16)
+#define  MCU_ERCRR_ERRCOL_RD(src)	((src) & 0x00000FFF)
+#define MCUSBECNT0			0x0324
+#define MCU_SBECNT_COUNT(src)		((src) & 0xFFFF)
+
+#define CSW_CSWCR			0x0000
+#define  CSW_CSWCR_DUALMCB_MASK		BIT(0)
+
+#define MCBADDRMR			0x0000
+#define  MCBADDRMR_MCU_INTLV_MODE_MASK	BIT(3)
+#define  MCBADDRMR_DUALMCU_MODE_MASK	BIT(2)
+#define  MCBADDRMR_MCB_INTLV_MODE_MASK	BIT(1)
+#define  MCBADDRMR_ADDRESS_MODE_MASK	BIT(0)
+
+struct xgene_edac_mc_ctx {
+	struct list_head	next;
+	char			*name;
+	struct mem_ctl_info	*mci;
+	struct xgene_edac	*edac;
+	void __iomem		*mcu_csr;
+	u32			mcu_id;
+};
+
+static ssize_t xgene_edac_mc_err_inject_write(struct file *file,
+					      const char __user *data,
+					      size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct xgene_edac_mc_ctx *ctx = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < MCU_MAX_RANK; i++) {
+		writel(MCU_ESRR_MULTUCERR_MASK | MCU_ESRR_BACKUCERR_MASK |
+		       MCU_ESRR_DEMANDUCERR_MASK | MCU_ESRR_CERR_MASK,
+		       ctx->mcu_csr + MCUESRRA0 + i * MCU_RANK_STRIDE);
+	}
+	return count;
+}
+
+static const struct file_operations xgene_edac_mc_debug_inject_fops = {
+	.open = simple_open,
+	.write = xgene_edac_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void xgene_edac_mc_create_debugfs_node(struct mem_ctl_info *mci)
+{
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+#ifdef CONFIG_EDAC_DEBUG
+	if (!mci->debugfs)
+		return;
+	debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
+			    &xgene_edac_mc_debug_inject_fops);
+#endif
+}
+
+static void xgene_edac_mc_check(struct mem_ctl_info *mci)
+{
+	struct xgene_edac_mc_ctx *ctx = mci->pvt_info;
+	unsigned int pcp_hp_stat;
+	unsigned int pcp_lp_stat;
+	u32 reg;
+	u32 rank;
+	u32 bank;
+	u32 count;
+	u32 col_row;
+
+	xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat);
+	xgene_edac_pcp_rd(ctx->edac, PCPLPERRINTSTS, &pcp_lp_stat);
+	if (!((MCU_UNCORR_ERR_MASK & pcp_hp_stat) ||
+	      (MCU_CTL_ERR_MASK & pcp_hp_stat) ||
+	      (MCU_CORR_ERR_MASK & pcp_lp_stat)))
+		return;
+
+	for (rank = 0; rank < MCU_MAX_RANK; rank++) {
+		reg = readl(ctx->mcu_csr + MCUESRR0 + rank * MCU_RANK_STRIDE);
+
+		/* Detect uncorrectable memory error */
+		if (reg & (MCU_ESRR_DEMANDUCERR_MASK |
+			   MCU_ESRR_BACKUCERR_MASK)) {
+			/* Detected uncorrectable memory error */
+			edac_mc_chipset_printk(mci, KERN_ERR, "X-Gene",
+				"MCU uncorrectable error at rank %d\n", rank);
+
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+				1, 0, 0, 0, 0, 0, -1, mci->ctl_name, "");
+		}
+
+		/* Detect correctable memory error */
+		if (reg & MCU_ESRR_CERR_MASK) {
+			bank = readl(ctx->mcu_csr + MCUEBLRR0 +
+				     rank * MCU_RANK_STRIDE);
+			col_row = readl(ctx->mcu_csr + MCUERCRR0 +
+					rank * MCU_RANK_STRIDE);
+			count = readl(ctx->mcu_csr + MCUSBECNT0 +
+				      rank * MCU_RANK_STRIDE);
+			edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene",
+				"MCU correctable error at rank %d bank %d column %d row %d count %d\n",
+				rank, MCU_EBLRR_ERRBANK_RD(bank),
+				MCU_ERCRR_ERRCOL_RD(col_row),
+				MCU_ERCRR_ERRROW_RD(col_row),
+				MCU_SBECNT_COUNT(count));
+
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+				1, 0, 0, 0, 0, 0, -1, mci->ctl_name, "");
+		}
+
+		/* Clear all error registers */
+		writel(0x0, ctx->mcu_csr + MCUEBLRR0 + rank * MCU_RANK_STRIDE);
+		writel(0x0, ctx->mcu_csr + MCUERCRR0 + rank * MCU_RANK_STRIDE);
+		writel(0x0, ctx->mcu_csr + MCUSBECNT0 +
+		       rank * MCU_RANK_STRIDE);
+		writel(reg, ctx->mcu_csr + MCUESRR0 + rank * MCU_RANK_STRIDE);
+	}
+
+	/* Detect memory controller error */
+	reg = readl(ctx->mcu_csr + MCUGESR);
+	if (reg) {
+		if (reg & MCU_GESR_ADDRNOMATCH_ERR_MASK)
+			edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene",
+				"MCU address miss-match error\n");
+		if (reg & MCU_GESR_ADDRMULTIMATCH_ERR_MASK)
+			edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene",
+				"MCU address multi-match error\n");
+
+		writel(reg, ctx->mcu_csr + MCUGESR);
+	}
+}
+
+static void xgene_edac_mc_irq_ctl(struct mem_ctl_info *mci, bool enable)
+{
+	struct xgene_edac_mc_ctx *ctx = mci->pvt_info;
+	unsigned int val;
+
+	if (edac_op_state != EDAC_OPSTATE_INT)
+		return;
+
+	mutex_lock(&ctx->edac->mc_lock);
+
+	/*
+	 * As there is only single bit for enable error and interrupt mask,
+	 * we must only enable top level interrupt after all MCUs are
+	 * registered. Otherwise, if there is an error and the corresponding
+	 * MCU has not registered, the interrupt will never get cleared. To
+	 * determine all MCU have registered, we will keep track of active
+	 * MCUs and registered MCUs.
+	 */
+	if (enable) {
+		/* Set registered MCU bit */
+		ctx->edac->mc_registered_mask |= 1 << ctx->mcu_id;
+
+		/* Enable interrupt after all active MCU registered */
+		if (ctx->edac->mc_registered_mask ==
+		    ctx->edac->mc_active_mask) {
+			/* Enable memory controller top level interrupt */
+			xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK,
+					       MCU_UNCORR_ERR_MASK |
+					       MCU_CTL_ERR_MASK);
+			xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK,
+					       MCU_CORR_ERR_MASK);
+		}
+
+		/* Enable MCU interrupt and error reporting */
+		val = readl(ctx->mcu_csr + MCUGECR);
+		val |= MCU_GECR_DEMANDUCINTREN_MASK |
+		       MCU_GECR_BACKUCINTREN_MASK |
+		       MCU_GECR_CINTREN_MASK |
+		       MUC_GECR_MCUADDRERREN_MASK;
+		writel(val, ctx->mcu_csr + MCUGECR);
+	} else {
+		/* Disable MCU interrupt */
+		val = readl(ctx->mcu_csr + MCUGECR);
+		val &= ~(MCU_GECR_DEMANDUCINTREN_MASK |
+			 MCU_GECR_BACKUCINTREN_MASK |
+			 MCU_GECR_CINTREN_MASK |
+			 MUC_GECR_MCUADDRERREN_MASK);
+		writel(val, ctx->mcu_csr + MCUGECR);
+
+		/* Disable memory controller top level interrupt */
+		xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK,
+				       MCU_UNCORR_ERR_MASK | MCU_CTL_ERR_MASK);
+		xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK,
+				       MCU_CORR_ERR_MASK);
+
+		/* Clear registered MCU bit */
+		ctx->edac->mc_registered_mask &= ~(1 << ctx->mcu_id);
+	}
+
+	mutex_unlock(&ctx->edac->mc_lock);
+}
+
+static int xgene_edac_mc_is_active(struct xgene_edac_mc_ctx *ctx, int mc_idx)
+{
+	unsigned int reg;
+	u32 mcu_mask;
+
+	if (regmap_read(ctx->edac->csw_map, CSW_CSWCR, &reg))
+		return 0;
+
+	if (reg & CSW_CSWCR_DUALMCB_MASK) {
+		/*
+		 * Dual MCB active - Determine if all 4 active or just MCU0
+		 * and MCU2 active
+		 */
+		if (regmap_read(ctx->edac->mcbb_map, MCBADDRMR, &reg))
+			return 0;
+		mcu_mask = (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5;
+	} else {
+		/*
+		 * Single MCB active - Determine if MCU0/MCU1 or just MCU0
+		 * active
+		 */
+		if (regmap_read(ctx->edac->mcba_map, MCBADDRMR, &reg))
+			return 0;
+		mcu_mask = (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1;
+	}
+
+	/* Save active MC mask if hasn't set already */
+	if (!ctx->edac->mc_active_mask)
+		ctx->edac->mc_active_mask = mcu_mask;
+
+	return (mcu_mask & (1 << mc_idx)) ? 1 : 0;
+}
+
+static int xgene_edac_mc_add(struct xgene_edac *edac, struct device_node *np)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct xgene_edac_mc_ctx tmp_ctx;
+	struct xgene_edac_mc_ctx *ctx;
+	struct resource res;
+	int rc;
+
+	memset(&tmp_ctx, 0, sizeof(tmp_ctx));
+	tmp_ctx.edac = edac;
+
+	if (!devres_open_group(edac->dev, xgene_edac_mc_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(edac->dev, "no MCU resource address\n");
+		goto err_group;
+	}
+	tmp_ctx.mcu_csr = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(tmp_ctx.mcu_csr)) {
+		dev_err(edac->dev, "unable to map MCU resource\n");
+		rc = PTR_ERR(tmp_ctx.mcu_csr);
+		goto err_group;
+	}
+
+	/* Ignore non-active MCU */
+	if (of_property_read_u32(np, "memory-controller", &tmp_ctx.mcu_id)) {
+		dev_err(edac->dev, "no memory-controller property\n");
+		rc = -ENODEV;
+		goto err_group;
+	}
+	if (!xgene_edac_mc_is_active(&tmp_ctx, tmp_ctx.mcu_id)) {
+		rc = -ENODEV;
+		goto err_group;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 4;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 2;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(tmp_ctx.mcu_id, ARRAY_SIZE(layers), layers,
+			    sizeof(*ctx));
+	if (!mci) {
+		rc = -ENOMEM;
+		goto err_group;
+	}
+
+	ctx = mci->pvt_info;
+	*ctx = tmp_ctx;		/* Copy over resource value */
+	ctx->name = "xgene_edac_mc_err";
+	ctx->mci = mci;
+	mci->pdev = &mci->dev;
+	mci->ctl_name = ctx->name;
+	mci->dev_name = ctx->name;
+
+	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 | MEM_FLAG_RDDR3 |
+			 MEM_FLAG_DDR | MEM_FLAG_DDR2 | MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->mod_ver = "0.1";
+	mci->ctl_page_to_phys = NULL;
+	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+	mci->scrub_mode = SCRUB_HW_SRC;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check = xgene_edac_mc_check;
+
+	if (edac_mc_add_mc(mci)) {
+		dev_err(edac->dev, "edac_mc_add_mc failed\n");
+		rc = -EINVAL;
+		goto err_free;
+	}
+
+	xgene_edac_mc_create_debugfs_node(mci);
+
+	list_add(&ctx->next, &edac->mcus);
+
+	xgene_edac_mc_irq_ctl(mci, true);
+
+	devres_remove_group(edac->dev, xgene_edac_mc_add);
+
+	dev_info(edac->dev, "X-Gene EDAC MC registered\n");
+	return 0;
+
+err_free:
+	edac_mc_free(mci);
+err_group:
+	devres_release_group(edac->dev, xgene_edac_mc_add);
+	return rc;
+}
+
+static int xgene_edac_mc_remove(struct xgene_edac_mc_ctx *mcu)
+{
+	xgene_edac_mc_irq_ctl(mcu->mci, false);
+	edac_mc_del_mc(&mcu->mci->dev);
+	edac_mc_free(mcu->mci);
+	return 0;
+}
+
+/* CPU L1/L2 error CSR */
+#define MAX_CPU_PER_PMD				2
+#define CPU_CSR_STRIDE				0x00100000
+#define CPU_L2C_PAGE				0x000D0000
+#define CPU_MEMERR_L2C_PAGE			0x000E0000
+#define CPU_MEMERR_CPU_PAGE			0x000F0000
+
+#define MEMERR_CPU_ICFECR_PAGE_OFFSET		0x0000
+#define MEMERR_CPU_ICFESR_PAGE_OFFSET		0x0004
+#define  MEMERR_CPU_ICFESR_ERRWAY_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_CPU_ICFESR_ERRINDEX_RD(src)	(((src) & 0x003F0000) >> 16)
+#define  MEMERR_CPU_ICFESR_ERRINFO_RD(src)	(((src) & 0x0000FF00) >> 8)
+#define  MEMERR_CPU_ICFESR_ERRTYPE_RD(src)	(((src) & 0x00000070) >> 4)
+#define  MEMERR_CPU_ICFESR_MULTCERR_MASK	BIT(2)
+#define  MEMERR_CPU_ICFESR_CERR_MASK		BIT(0)
+#define MEMERR_CPU_LSUESR_PAGE_OFFSET		0x000c
+#define  MEMERR_CPU_LSUESR_ERRWAY_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_CPU_LSUESR_ERRINDEX_RD(src)	(((src) & 0x003F0000) >> 16)
+#define  MEMERR_CPU_LSUESR_ERRINFO_RD(src)	(((src) & 0x0000FF00) >> 8)
+#define  MEMERR_CPU_LSUESR_ERRTYPE_RD(src)	(((src) & 0x00000070) >> 4)
+#define  MEMERR_CPU_LSUESR_MULTCERR_MASK	BIT(2)
+#define  MEMERR_CPU_LSUESR_CERR_MASK		BIT(0)
+#define MEMERR_CPU_LSUECR_PAGE_OFFSET		0x0008
+#define MEMERR_CPU_MMUECR_PAGE_OFFSET		0x0010
+#define MEMERR_CPU_MMUESR_PAGE_OFFSET		0x0014
+#define  MEMERR_CPU_MMUESR_ERRWAY_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_CPU_MMUESR_ERRINDEX_RD(src)	(((src) & 0x007F0000) >> 16)
+#define  MEMERR_CPU_MMUESR_ERRINFO_RD(src)	(((src) & 0x0000FF00) >> 8)
+#define  MEMERR_CPU_MMUESR_ERRREQSTR_LSU_MASK	BIT(7)
+#define  MEMERR_CPU_MMUESR_ERRTYPE_RD(src)	(((src) & 0x00000070) >> 4)
+#define  MEMERR_CPU_MMUESR_MULTCERR_MASK	BIT(2)
+#define  MEMERR_CPU_MMUESR_CERR_MASK		BIT(0)
+#define MEMERR_CPU_ICFESRA_PAGE_OFFSET		0x0804
+#define MEMERR_CPU_LSUESRA_PAGE_OFFSET		0x080c
+#define MEMERR_CPU_MMUESRA_PAGE_OFFSET		0x0814
+
+#define MEMERR_L2C_L2ECR_PAGE_OFFSET		0x0000
+#define MEMERR_L2C_L2ESR_PAGE_OFFSET		0x0004
+#define  MEMERR_L2C_L2ESR_ERRSYN_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_L2C_L2ESR_ERRWAY_RD(src)	(((src) & 0x00FC0000) >> 18)
+#define  MEMERR_L2C_L2ESR_ERRCPU_RD(src)	(((src) & 0x00020000) >> 17)
+#define  MEMERR_L2C_L2ESR_ERRGROUP_RD(src)	(((src) & 0x0000E000) >> 13)
+#define  MEMERR_L2C_L2ESR_ERRACTION_RD(src)	(((src) & 0x00001C00) >> 10)
+#define  MEMERR_L2C_L2ESR_ERRTYPE_RD(src)	(((src) & 0x00000300) >> 8)
+#define  MEMERR_L2C_L2ESR_MULTUCERR_MASK	BIT(3)
+#define  MEMERR_L2C_L2ESR_MULTICERR_MASK	BIT(2)
+#define  MEMERR_L2C_L2ESR_UCERR_MASK		BIT(1)
+#define  MEMERR_L2C_L2ESR_ERR_MASK		BIT(0)
+#define MEMERR_L2C_L2EALR_PAGE_OFFSET		0x0008
+#define CPUX_L2C_L2RTOCR_PAGE_OFFSET		0x0010
+#define MEMERR_L2C_L2EAHR_PAGE_OFFSET		0x000c
+#define CPUX_L2C_L2RTOSR_PAGE_OFFSET		0x0014
+#define  MEMERR_L2C_L2RTOSR_MULTERR_MASK	BIT(1)
+#define  MEMERR_L2C_L2RTOSR_ERR_MASK		BIT(0)
+#define CPUX_L2C_L2RTOALR_PAGE_OFFSET		0x0018
+#define CPUX_L2C_L2RTOAHR_PAGE_OFFSET		0x001c
+#define MEMERR_L2C_L2ESRA_PAGE_OFFSET		0x0804
+
+/*
+ * Processor Module Domain (PMD) context - Context for a pair of processsors.
+ * Each PMD consists of 2 CPUs and a shared L2 cache. Each CPU consists of
+ * its own L1 cache.
+ */
+struct xgene_edac_pmd_ctx {
+	struct list_head	next;
+	struct device		ddev;
+	char			*name;
+	struct xgene_edac	*edac;
+	struct edac_device_ctl_info *edac_dev;
+	void __iomem		*pmd_csr;
+	u32			pmd;
+	int			version;
+};
+
+static void xgene_edac_pmd_l1_check(struct edac_device_ctl_info *edac_dev,
+				    int cpu_idx)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_f;
+	u32 val;
+
+	pg_f = ctx->pmd_csr + cpu_idx * CPU_CSR_STRIDE + CPU_MEMERR_CPU_PAGE;
+
+	val = readl(pg_f + MEMERR_CPU_ICFESR_PAGE_OFFSET);
+	if (val) {
+		dev_err(edac_dev->dev,
+			"CPU%d L1 memory error ICF 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X\n",
+			ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val,
+			MEMERR_CPU_ICFESR_ERRWAY_RD(val),
+			MEMERR_CPU_ICFESR_ERRINDEX_RD(val),
+			MEMERR_CPU_ICFESR_ERRINFO_RD(val));
+		if (val & MEMERR_CPU_ICFESR_CERR_MASK)
+			dev_err(edac_dev->dev,
+				"One or more correctable error\n");
+		if (val & MEMERR_CPU_ICFESR_MULTCERR_MASK)
+			dev_err(edac_dev->dev, "Multiple correctable error\n");
+		switch (MEMERR_CPU_ICFESR_ERRTYPE_RD(val)) {
+		case 1:
+			dev_err(edac_dev->dev, "L1 TLB multiple hit\n");
+			break;
+		case 2:
+			dev_err(edac_dev->dev, "Way select multiple hit\n");
+			break;
+		case 3:
+			dev_err(edac_dev->dev, "Physical tag parity error\n");
+			break;
+		case 4:
+		case 5:
+			dev_err(edac_dev->dev, "L1 data parity error\n");
+			break;
+		case 6:
+			dev_err(edac_dev->dev, "L1 pre-decode parity error\n");
+			break;
+		}
+
+		/* Clear any HW errors */
+		writel(val, pg_f + MEMERR_CPU_ICFESR_PAGE_OFFSET);
+
+		if (val & (MEMERR_CPU_ICFESR_CERR_MASK |
+			   MEMERR_CPU_ICFESR_MULTCERR_MASK))
+			edac_device_handle_ce(edac_dev, 0, 0,
+					      edac_dev->ctl_name);
+	}
+
+	val = readl(pg_f + MEMERR_CPU_LSUESR_PAGE_OFFSET);
+	if (val) {
+		dev_err(edac_dev->dev,
+			"CPU%d memory error LSU 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X\n",
+			ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val,
+			MEMERR_CPU_LSUESR_ERRWAY_RD(val),
+			MEMERR_CPU_LSUESR_ERRINDEX_RD(val),
+			MEMERR_CPU_LSUESR_ERRINFO_RD(val));
+		if (val & MEMERR_CPU_LSUESR_CERR_MASK)
+			dev_err(edac_dev->dev,
+				"One or more correctable error\n");
+		if (val & MEMERR_CPU_LSUESR_MULTCERR_MASK)
+			dev_err(edac_dev->dev, "Multiple correctable error\n");
+		switch (MEMERR_CPU_LSUESR_ERRTYPE_RD(val)) {
+		case 0:
+			dev_err(edac_dev->dev, "Load tag error\n");
+			break;
+		case 1:
+			dev_err(edac_dev->dev, "Load data error\n");
+			break;
+		case 2:
+			dev_err(edac_dev->dev, "WSL multihit error\n");
+			break;
+		case 3:
+			dev_err(edac_dev->dev, "Store tag error\n");
+			break;
+		case 4:
+			dev_err(edac_dev->dev,
+				"DTB multihit from load pipeline error\n");
+			break;
+		case 5:
+			dev_err(edac_dev->dev,
+				"DTB multihit from store pipeline error\n");
+			break;
+		}
+
+		/* Clear any HW errors */
+		writel(val, pg_f + MEMERR_CPU_LSUESR_PAGE_OFFSET);
+
+		if (val & (MEMERR_CPU_LSUESR_CERR_MASK |
+			   MEMERR_CPU_LSUESR_MULTCERR_MASK))
+			edac_device_handle_ce(edac_dev, 0, 0,
+					      edac_dev->ctl_name);
+	}
+
+	val = readl(pg_f + MEMERR_CPU_MMUESR_PAGE_OFFSET);
+	if (val) {
+		dev_err(edac_dev->dev,
+			"CPU%d memory error MMU 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X %s\n",
+			ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val,
+			MEMERR_CPU_MMUESR_ERRWAY_RD(val),
+			MEMERR_CPU_MMUESR_ERRINDEX_RD(val),
+			MEMERR_CPU_MMUESR_ERRINFO_RD(val),
+			val & MEMERR_CPU_MMUESR_ERRREQSTR_LSU_MASK ? "LSU" :
+								     "ICF");
+		if (val & MEMERR_CPU_MMUESR_CERR_MASK)
+			dev_err(edac_dev->dev,
+				"One or more correctable error\n");
+		if (val & MEMERR_CPU_MMUESR_MULTCERR_MASK)
+			dev_err(edac_dev->dev, "Multiple correctable error\n");
+		switch (MEMERR_CPU_MMUESR_ERRTYPE_RD(val)) {
+		case 0:
+			dev_err(edac_dev->dev, "Stage 1 UTB hit error\n");
+			break;
+		case 1:
+			dev_err(edac_dev->dev, "Stage 1 UTB miss error\n");
+			break;
+		case 2:
+			dev_err(edac_dev->dev, "Stage 1 UTB allocate error\n");
+			break;
+		case 3:
+			dev_err(edac_dev->dev,
+				"TMO operation single bank error\n");
+			break;
+		case 4:
+			dev_err(edac_dev->dev, "Stage 2 UTB error\n");
+			break;
+		case 5:
+			dev_err(edac_dev->dev, "Stage 2 UTB miss error\n");
+			break;
+		case 6:
+			dev_err(edac_dev->dev, "Stage 2 UTB allocate error\n");
+			break;
+		case 7:
+			dev_err(edac_dev->dev,
+				"TMO operation multiple bank error\n");
+			break;
+		}
+
+		/* Clear any HW errors */
+		writel(val, pg_f + MEMERR_CPU_MMUESR_PAGE_OFFSET);
+
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+	}
+}
+
+static void xgene_edac_pmd_l2_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_d;
+	void __iomem *pg_e;
+	u32 val_hi;
+	u32 val_lo;
+	u32 val;
+
+	/* Check L2 */
+	pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE;
+	val = readl(pg_e + MEMERR_L2C_L2ESR_PAGE_OFFSET);
+	if (val) {
+		val_lo = readl(pg_e + MEMERR_L2C_L2EALR_PAGE_OFFSET);
+		val_hi = readl(pg_e + MEMERR_L2C_L2EAHR_PAGE_OFFSET);
+		dev_err(edac_dev->dev,
+			"PMD%d memory error L2C L2ESR 0x%08X @ 0x%08X.%08X\n",
+			ctx->pmd, val, val_hi, val_lo);
+		dev_err(edac_dev->dev,
+			"ErrSyndrome 0x%02X ErrWay 0x%02X ErrCpu %d ErrGroup 0x%02X ErrAction 0x%02X\n",
+			MEMERR_L2C_L2ESR_ERRSYN_RD(val),
+			MEMERR_L2C_L2ESR_ERRWAY_RD(val),
+			MEMERR_L2C_L2ESR_ERRCPU_RD(val),
+			MEMERR_L2C_L2ESR_ERRGROUP_RD(val),
+			MEMERR_L2C_L2ESR_ERRACTION_RD(val));
+
+		if (val & MEMERR_L2C_L2ESR_ERR_MASK)
+			dev_err(edac_dev->dev,
+				"One or more correctable error\n");
+		if (val & MEMERR_L2C_L2ESR_MULTICERR_MASK)
+			dev_err(edac_dev->dev, "Multiple correctable error\n");
+		if (val & MEMERR_L2C_L2ESR_UCERR_MASK)
+			dev_err(edac_dev->dev,
+				"One or more uncorrectable error\n");
+		if (val & MEMERR_L2C_L2ESR_MULTUCERR_MASK)
+			dev_err(edac_dev->dev,
+				"Multiple uncorrectable error\n");
+
+		switch (MEMERR_L2C_L2ESR_ERRTYPE_RD(val)) {
+		case 0:
+			dev_err(edac_dev->dev, "Outbound SDB parity error\n");
+			break;
+		case 1:
+			dev_err(edac_dev->dev, "Inbound SDB parity error\n");
+			break;
+		case 2:
+			dev_err(edac_dev->dev, "Tag ECC error\n");
+			break;
+		case 3:
+			dev_err(edac_dev->dev, "Data ECC error\n");
+			break;
+		}
+
+		/* Clear any HW errors */
+		writel(val, pg_e + MEMERR_L2C_L2ESR_PAGE_OFFSET);
+
+		if (val & (MEMERR_L2C_L2ESR_ERR_MASK |
+			   MEMERR_L2C_L2ESR_MULTICERR_MASK))
+			edac_device_handle_ce(edac_dev, 0, 0,
+					      edac_dev->ctl_name);
+		if (val & (MEMERR_L2C_L2ESR_UCERR_MASK |
+			   MEMERR_L2C_L2ESR_MULTUCERR_MASK))
+			edac_device_handle_ue(edac_dev, 0, 0,
+					      edac_dev->ctl_name);
+	}
+
+	/* Check if any memory request timed out on L2 cache */
+	pg_d = ctx->pmd_csr + CPU_L2C_PAGE;
+	val = readl(pg_d + CPUX_L2C_L2RTOSR_PAGE_OFFSET);
+	if (val) {
+		val_lo = readl(pg_d + CPUX_L2C_L2RTOALR_PAGE_OFFSET);
+		val_hi = readl(pg_d + CPUX_L2C_L2RTOAHR_PAGE_OFFSET);
+		dev_err(edac_dev->dev,
+			"PMD%d L2C error L2C RTOSR 0x%08X @ 0x%08X.%08X\n",
+			ctx->pmd, val, val_hi, val_lo);
+		writel(val, pg_d + CPUX_L2C_L2RTOSR_PAGE_OFFSET);
+	}
+}
+
+static void xgene_edac_pmd_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	unsigned int pcp_hp_stat;
+	int i;
+
+	xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat);
+	if (!((PMD0_MERR_MASK << ctx->pmd) & pcp_hp_stat))
+		return;
+
+	/* Check CPU L1 error */
+	for (i = 0; i < MAX_CPU_PER_PMD; i++)
+		xgene_edac_pmd_l1_check(edac_dev, i);
+
+	/* Check CPU L2 error */
+	xgene_edac_pmd_l2_check(edac_dev);
+}
+
+static void xgene_edac_pmd_cpu_hw_cfg(struct edac_device_ctl_info *edac_dev,
+				      int cpu)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_f = ctx->pmd_csr + cpu * CPU_CSR_STRIDE +
+			     CPU_MEMERR_CPU_PAGE;
+
+	/*
+	 * Enable CPU memory error:
+	 *  MEMERR_CPU_ICFESRA, MEMERR_CPU_LSUESRA, and MEMERR_CPU_MMUESRA
+	 */
+	writel(0x00000301, pg_f + MEMERR_CPU_ICFECR_PAGE_OFFSET);
+	writel(0x00000301, pg_f + MEMERR_CPU_LSUECR_PAGE_OFFSET);
+	writel(0x00000101, pg_f + MEMERR_CPU_MMUECR_PAGE_OFFSET);
+}
+
+static void xgene_edac_pmd_hw_cfg(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_d = ctx->pmd_csr + CPU_L2C_PAGE;
+	void __iomem *pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE;
+
+	/* Enable PMD memory error - MEMERR_L2C_L2ECR and L2C_L2RTOCR */
+	writel(0x00000703, pg_e + MEMERR_L2C_L2ECR_PAGE_OFFSET);
+	/* Configure L2C HW request time out feature if supported */
+	if (ctx->version > 1)
+		writel(0x00000119, pg_d + CPUX_L2C_L2RTOCR_PAGE_OFFSET);
+}
+
+static void xgene_edac_pmd_hw_ctl(struct edac_device_ctl_info *edac_dev,
+				  bool enable)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	int i;
+
+	/* Enable PMD error interrupt */
+	if (edac_dev->op_state == OP_RUNNING_INTERRUPT) {
+		if (enable)
+			xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK,
+					       PMD0_MERR_MASK << ctx->pmd);
+		else
+			xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK,
+					       PMD0_MERR_MASK << ctx->pmd);
+	}
+
+	if (enable) {
+		xgene_edac_pmd_hw_cfg(edac_dev);
+
+		/* Two CPUs per a PMD */
+		for (i = 0; i < MAX_CPU_PER_PMD; i++)
+			xgene_edac_pmd_cpu_hw_cfg(edac_dev, i);
+	}
+}
+
+static ssize_t xgene_edac_pmd_l1_inject_ctrl_write(struct file *file,
+						   const char __user *data,
+						   size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dev = file->private_data;
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *cpux_pg_f;
+	int i;
+
+	for (i = 0; i < MAX_CPU_PER_PMD; i++) {
+		cpux_pg_f = ctx->pmd_csr + i * CPU_CSR_STRIDE +
+			    CPU_MEMERR_CPU_PAGE;
+
+		writel(MEMERR_CPU_ICFESR_MULTCERR_MASK |
+		       MEMERR_CPU_ICFESR_CERR_MASK,
+		       cpux_pg_f + MEMERR_CPU_ICFESRA_PAGE_OFFSET);
+		writel(MEMERR_CPU_LSUESR_MULTCERR_MASK |
+		       MEMERR_CPU_LSUESR_CERR_MASK,
+		       cpux_pg_f + MEMERR_CPU_LSUESRA_PAGE_OFFSET);
+		writel(MEMERR_CPU_MMUESR_MULTCERR_MASK |
+		       MEMERR_CPU_MMUESR_CERR_MASK,
+		       cpux_pg_f + MEMERR_CPU_MMUESRA_PAGE_OFFSET);
+	}
+	return count;
+}
+
+static ssize_t xgene_edac_pmd_l2_inject_ctrl_write(struct file *file,
+						   const char __user *data,
+						   size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dev = file->private_data;
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE;
+
+	writel(MEMERR_L2C_L2ESR_MULTUCERR_MASK |
+	       MEMERR_L2C_L2ESR_MULTICERR_MASK |
+	       MEMERR_L2C_L2ESR_UCERR_MASK |
+	       MEMERR_L2C_L2ESR_ERR_MASK,
+	       pg_e + MEMERR_L2C_L2ESRA_PAGE_OFFSET);
+	return count;
+}
+
+static const struct file_operations xgene_edac_pmd_debug_inject_fops[] = {
+	{
+	.open = simple_open,
+	.write = xgene_edac_pmd_l1_inject_ctrl_write,
+	.llseek = generic_file_llseek, },
+	{
+	.open = simple_open,
+	.write = xgene_edac_pmd_l2_inject_ctrl_write,
+	.llseek = generic_file_llseek, },
+	{ }
+};
+
+static void xgene_edac_pmd_create_debugfs_nodes(
+	struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	struct dentry *edac_debugfs;
+	char name[30];
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	/*
+	 * Todo: Switch to common EDAC debug file system for edac device
+	 *       when available.
+	 */
+	if (!ctx->edac->dfs) {
+		ctx->edac->dfs = debugfs_create_dir(edac_dev->dev->kobj.name,
+						    NULL);
+		if (!ctx->edac->dfs)
+			return;
+	}
+	sprintf(name, "PMD%d", ctx->pmd);
+	edac_debugfs = debugfs_create_dir(name, ctx->edac->dfs);
+	if (!edac_debugfs)
+		return;
+
+	debugfs_create_file("l1_inject_ctrl", S_IWUSR, edac_debugfs, edac_dev,
+			    &xgene_edac_pmd_debug_inject_fops[0]);
+	debugfs_create_file("l2_inject_ctrl", S_IWUSR, edac_debugfs, edac_dev,
+			    &xgene_edac_pmd_debug_inject_fops[1]);
+}
+
+static int xgene_edac_pmd_available(u32 efuse, int pmd)
+{
+	return (efuse & (1 << pmd)) ? 0 : 1;
+}
+
+static int xgene_edac_pmd_add(struct xgene_edac *edac, struct device_node *np,
+			      int version)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct xgene_edac_pmd_ctx *ctx;
+	struct resource res;
+	char edac_name[10];
+	u32 pmd;
+	int rc;
+	u32 val;
+
+	if (!devres_open_group(edac->dev, xgene_edac_pmd_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	/* Determine if this PMD is disabled */
+	if (of_property_read_u32(np, "pmd-controller", &pmd)) {
+		dev_err(edac->dev, "no pmd-controller property\n");
+		rc = -ENODEV;
+		goto err_group;
+	}
+	rc = regmap_read(edac->efuse_map, 0, &val);
+	if (rc)
+		goto err_group;
+	if (!xgene_edac_pmd_available(val, pmd)) {
+		rc = -ENODEV;
+		goto err_group;
+	}
+
+	sprintf(edac_name, "l2c%d", pmd);
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx),
+					      edac_name, 1, "l2c", 1, 2, NULL,
+					      0, edac_device_alloc_index());
+	if (!edac_dev) {
+		rc = -ENOMEM;
+		goto err_group;
+	}
+
+	ctx = edac_dev->pvt_info;
+	ctx->name = "xgene_pmd_err";
+	ctx->pmd = pmd;
+	ctx->edac = edac;
+	ctx->edac_dev = edac_dev;
+	ctx->ddev = *edac->dev;
+	ctx->version = version;
+	edac_dev->dev = &ctx->ddev;
+	edac_dev->ctl_name = ctx->name;
+	edac_dev->dev_name = ctx->name;
+	edac_dev->mod_name = EDAC_MOD_STR;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(edac->dev, "no PMD resource address\n");
+		goto err_free;
+	}
+	ctx->pmd_csr = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(ctx->pmd_csr)) {
+		dev_err(edac->dev,
+			"devm_ioremap_resource failed for PMD resource address\n");
+		rc = PTR_ERR(ctx->pmd_csr);
+		goto err_free;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = xgene_edac_pmd_check;
+
+	xgene_edac_pmd_create_debugfs_nodes(edac_dev);
+
+	rc = edac_device_add_device(edac_dev);
+	if (rc > 0) {
+		dev_err(edac->dev, "edac_device_add_device failed\n");
+		rc = -ENOMEM;
+		goto err_free;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT)
+		edac_dev->op_state = OP_RUNNING_INTERRUPT;
+
+	list_add(&ctx->next, &edac->pmds);
+
+	xgene_edac_pmd_hw_ctl(edac_dev, 1);
+
+	devres_remove_group(edac->dev, xgene_edac_pmd_add);
+
+	dev_info(edac->dev, "X-Gene EDAC PMD%d registered\n", ctx->pmd);
+	return 0;
+
+err_free:
+	edac_device_free_ctl_info(edac_dev);
+err_group:
+	devres_release_group(edac->dev, xgene_edac_pmd_add);
+	return rc;
+}
+
+static int xgene_edac_pmd_remove(struct xgene_edac_pmd_ctx *pmd)
+{
+	struct edac_device_ctl_info *edac_dev = pmd->edac_dev;
+
+	xgene_edac_pmd_hw_ctl(edac_dev, 0);
+	edac_device_del_device(edac_dev->dev);
+	edac_device_free_ctl_info(edac_dev);
+	return 0;
+}
+
+static irqreturn_t xgene_edac_isr(int irq, void *dev_id)
+{
+	struct xgene_edac *ctx = dev_id;
+	struct xgene_edac_pmd_ctx *pmd;
+	unsigned int pcp_hp_stat;
+	unsigned int pcp_lp_stat;
+
+	xgene_edac_pcp_rd(ctx, PCPHPERRINTSTS, &pcp_hp_stat);
+	xgene_edac_pcp_rd(ctx, PCPLPERRINTSTS, &pcp_lp_stat);
+	if ((MCU_UNCORR_ERR_MASK & pcp_hp_stat) ||
+	    (MCU_CTL_ERR_MASK & pcp_hp_stat) ||
+	    (MCU_CORR_ERR_MASK & pcp_lp_stat)) {
+		struct xgene_edac_mc_ctx *mcu;
+
+		list_for_each_entry(mcu, &ctx->mcus, next) {
+			xgene_edac_mc_check(mcu->mci);
+		}
+	}
+
+	list_for_each_entry(pmd, &ctx->pmds, next) {
+		if ((PMD0_MERR_MASK << pmd->pmd) & pcp_hp_stat)
+			xgene_edac_pmd_check(pmd->edac_dev);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int xgene_edac_probe(struct platform_device *pdev)
+{
+	struct xgene_edac *edac;
+	struct device_node *child;
+	struct resource *res;
+	int rc;
+
+	edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
+	if (!edac)
+		return -ENOMEM;
+
+	edac->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac);
+	INIT_LIST_HEAD(&edac->mcus);
+	INIT_LIST_HEAD(&edac->pmds);
+	spin_lock_init(&edac->lock);
+	mutex_init(&edac->mc_lock);
+
+	edac->csw_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"regmap-csw");
+	if (IS_ERR(edac->csw_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap csw\n");
+		rc = PTR_ERR(edac->csw_map);
+		goto out_err;
+	}
+
+	edac->mcba_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							 "regmap-mcba");
+	if (IS_ERR(edac->mcba_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap mcba\n");
+		rc = PTR_ERR(edac->mcba_map);
+		goto out_err;
+	}
+
+	edac->mcbb_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							 "regmap-mcbb");
+	if (IS_ERR(edac->mcbb_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap mcbb\n");
+		rc = PTR_ERR(edac->mcbb_map);
+		goto out_err;
+	}
+	edac->efuse_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							  "regmap-efuse");
+	if (IS_ERR(edac->efuse_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap efuse\n");
+		rc = PTR_ERR(edac->efuse_map);
+		goto out_err;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	edac->pcp_csr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(edac->pcp_csr)) {
+		dev_err(&pdev->dev, "no PCP resource address\n");
+		rc = PTR_ERR(edac->pcp_csr);
+		goto out_err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		int irq;
+		int i;
+
+		for (i = 0; i < 3; i++) {
+			irq = platform_get_irq(pdev, i);
+			if (irq < 0) {
+				dev_err(&pdev->dev, "No IRQ resource\n");
+				rc = -EINVAL;
+				goto out_err;
+			}
+			rc = devm_request_irq(&pdev->dev, irq,
+					      xgene_edac_isr, IRQF_SHARED,
+					      dev_name(&pdev->dev), edac);
+			if (rc) {
+				dev_err(&pdev->dev,
+					"Could not request IRQ %d\n", irq);
+				goto out_err;
+			}
+		}
+	}
+
+	for_each_child_of_node(pdev->dev.of_node, child) {
+		if (!of_device_is_available(child))
+			continue;
+		if (of_device_is_compatible(child, "apm,xgene-edac-mc"))
+			xgene_edac_mc_add(edac, child);
+		if (of_device_is_compatible(child, "apm,xgene-edac-pmd"))
+			xgene_edac_pmd_add(edac, child, 1);
+		if (of_device_is_compatible(child, "apm,xgene-edac-pmd-v2"))
+			xgene_edac_pmd_add(edac, child, 2);
+	}
+
+	return 0;
+
+out_err:
+	return rc;
+}
+
+static int xgene_edac_remove(struct platform_device *pdev)
+{
+	struct xgene_edac *edac = dev_get_drvdata(&pdev->dev);
+	struct xgene_edac_mc_ctx *mcu;
+	struct xgene_edac_mc_ctx *temp_mcu;
+	struct xgene_edac_pmd_ctx *pmd;
+	struct xgene_edac_pmd_ctx *temp_pmd;
+
+	list_for_each_entry_safe(mcu, temp_mcu, &edac->mcus, next) {
+		xgene_edac_mc_remove(mcu);
+	}
+
+	list_for_each_entry_safe(pmd, temp_pmd, &edac->pmds, next) {
+		xgene_edac_pmd_remove(pmd);
+	}
+	return 0;
+}
+
+static const struct of_device_id xgene_edac_of_match[] = {
+	{ .compatible = "apm,xgene-edac" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xgene_edac_of_match);
+
+static struct platform_driver xgene_edac_driver = {
+	.probe = xgene_edac_probe,
+	.remove = xgene_edac_remove,
+	.driver = {
+		.name = "xgene-edac",
+		.owner = THIS_MODULE,
+		.of_match_table = xgene_edac_of_match,
+	},
+};
+
+static int __init xgene_edac_init(void)
+{
+	int rc;
+
+	/* Make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	rc = platform_driver_register(&xgene_edac_driver);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_MOD_STR,
+			    "EDAC fails to register\n");
+		goto reg_failed;
+	}
+
+	return 0;
+
+reg_failed:
+	return rc;
+}
+module_init(xgene_edac_init);
+
+static void __exit xgene_edac_exit(void)
+{
+	platform_driver_unregister(&xgene_edac_driver);
+}
+module_exit(xgene_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Feng Kan <fkan@apm.com>");
+MODULE_DESCRIPTION("APM X-Gene EDAC driver");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+		 "EDAC error reporting state: 0=Poll, 2=Interrupt");