Staging: wlan-ng: prism2mgmt.c: Coding style cleanups

Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/wlan-ng/prism2mgmt.c

@@ -57,9 +57,6 @@
 * --------------------------------------------------------------------
 */
 
-/*================================================================*/
-/* System Includes */
-
 #include <linux/if_arp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -124,105 +121,112 @@
 ----------------------------------------------------------------*/
 int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 {
-	int 			result = 0;
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_dot11req_scan_t	*msg = msgp;
-        u16                  roamingmode, word;
-	int                     i, timeout;
-	int                     istmpenable = 0;
-
-        hfa384x_HostScanRequest_data_t  scanreq;
-
-        /* gatekeeper check */
-        if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
-                                     hw->ident_sta_fw.minor,
-                                     hw->ident_sta_fw.variant) <
-            HFA384x_FIRMWARE_VERSION(1,3,2)) {
-		printk(KERN_ERR "HostScan not supported with current firmware (<1.3.2).\n");
-                result = 1;
-                msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+	int result = 0;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_dot11req_scan_t *msg = msgp;
+	u16 roamingmode, word;
+	int i, timeout;
+	int istmpenable = 0;
+
+	hfa384x_HostScanRequest_data_t scanreq;
+
+	/* gatekeeper check */
+	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+				     hw->ident_sta_fw.minor,
+				     hw->ident_sta_fw.variant) <
+	    HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
+		printk(KERN_ERR
+		       "HostScan not supported with current firmware (<1.3.2).\n");
+		result = 1;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto exit;
+	}
+
+	memset(&scanreq, 0, sizeof(scanreq));
+
+	/* save current roaming mode */
+	result = hfa384x_drvr_getconfig16(hw,
+					  HFA384x_RID_CNFROAMINGMODE,
+					  &roamingmode);
+	if (result) {
+		printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
+		       result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
 	}
 
-        memset(&scanreq, 0, sizeof(scanreq));
-
-        /* save current roaming mode */
-        result = hfa384x_drvr_getconfig16(hw,
-                        HFA384x_RID_CNFROAMINGMODE, &roamingmode);
-        if ( result ) {
-                printk(KERN_ERR "getconfig(ROAMMODE) failed. result=%d\n",
-                                result);
-                msg->resultcode.data =
-                        P80211ENUM_resultcode_implementation_failure;
-                goto exit;
-        }
-
-        /* drop into mode 3 for the scan */
-        result = hfa384x_drvr_setconfig16(hw,
-                        HFA384x_RID_CNFROAMINGMODE,
-			HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
-        if ( result ) {
-                printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
-                                result);
-                msg->resultcode.data =
-                        P80211ENUM_resultcode_implementation_failure;
-                goto exit;
-        }
-
-        /* active or passive? */
-        if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
-                                     hw->ident_sta_fw.minor,
-                                     hw->ident_sta_fw.variant) >
-            HFA384x_FIRMWARE_VERSION(1,5,0)) {
-                if (msg->scantype.data != P80211ENUM_scantype_active) {
-                        word = host2hfa384x_16(msg->maxchanneltime.data);
-                } else {
-                        word = 0;
-                }
-                result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL, word);
-                if ( result ) {
-                        printk(KERN_WARNING "Passive scan not supported with "
-					  "current firmware.  (<1.5.1)\n");
-                }
-        }
+	/* drop into mode 3 for the scan */
+	result = hfa384x_drvr_setconfig16(hw,
+					  HFA384x_RID_CNFROAMINGMODE,
+					  HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+	if (result) {
+		printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n",
+		       result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+
+	/* active or passive? */
+	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+				     hw->ident_sta_fw.minor,
+				     hw->ident_sta_fw.variant) >
+	    HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
+		if (msg->scantype.data != P80211ENUM_scantype_active)
+			word = host2hfa384x_16(msg->maxchanneltime.data);
+		else
+			word = 0;
+
+		result =
+		    hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
+					     word);
+		if (result) {
+			printk(KERN_WARNING "Passive scan not supported with "
+			       "current firmware.  (<1.5.1)\n");
+		}
+	}
 
 	/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
 	word = HFA384x_RATEBIT_2;
 	scanreq.txRate = host2hfa384x_16(word);
 
-        /* set up the channel list */
-        word = 0;
-        for (i = 0; i < msg->channellist.data.len; i++) {
-                u8 channel = msg->channellist.data.data[i];
-                if (channel > 14) continue;
-                /* channel 1 is BIT 0 ... channel 14 is BIT 13 */
-                word |= (1 << (channel-1));
-        }
-        scanreq.channelList = host2hfa384x_16(word);
+	/* set up the channel list */
+	word = 0;
+	for (i = 0; i < msg->channellist.data.len; i++) {
+		u8 channel = msg->channellist.data.data[i];
+		if (channel > 14)
+			continue;
+		/* channel 1 is BIT 0 ... channel 14 is BIT 13 */
+		word |= (1 << (channel - 1));
+	}
+	scanreq.channelList = host2hfa384x_16(word);
 
-        /* set up the ssid, if present. */
-        scanreq.ssid.len = host2hfa384x_16(msg->ssid.data.len);
-        memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
+	/* set up the ssid, if present. */
+	scanreq.ssid.len = host2hfa384x_16(msg->ssid.data.len);
+	memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
 
 	/* Enable the MAC port if it's not already enabled  */
 	result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "getconfig(PORTSTATUS) failed. "
-				"result=%d\n", result);
+		       "result=%d\n", result);
 		msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+		    P80211ENUM_resultcode_implementation_failure;
 		goto exit;
 	}
 	if (word == HFA384x_PORTSTATUS_DISABLED) {
 		u16 wordbuf[17];
 
 		result = hfa384x_drvr_setconfig16(hw,
-			HFA384x_RID_CNFROAMINGMODE,
-			HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
-		if ( result ) {
-			printk(KERN_ERR "setconfig(ROAMINGMODE) failed. result=%d\n", result);
+						  HFA384x_RID_CNFROAMINGMODE,
+						  HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+		if (result) {
+			printk(KERN_ERR
+			       "setconfig(ROAMINGMODE) failed. result=%d\n",
+			       result);
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 		/* Construct a bogus SSID and assign it to OwnSSID and
@@ -230,73 +234,75 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 		 */
 		wordbuf[0] = host2hfa384x_16(WLAN_SSID_MAXLEN);
 		get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
-		result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
-				wordbuf, HFA384x_RID_CNFOWNSSID_LEN);
-		if ( result ) {
+		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
+						wordbuf,
+						HFA384x_RID_CNFOWNSSID_LEN);
+		if (result) {
 			printk(KERN_ERR "Failed to set OwnSSID.\n");
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
-		result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
-				wordbuf, HFA384x_RID_CNFDESIREDSSID_LEN);
-		if ( result ) {
+		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+						wordbuf,
+						HFA384x_RID_CNFDESIREDSSID_LEN);
+		if (result) {
 			printk(KERN_ERR "Failed to set DesiredSSID.\n");
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 		/* bsstype */
 		result = hfa384x_drvr_setconfig16(hw,
-				HFA384x_RID_CNFPORTTYPE,
-				HFA384x_PORTTYPE_IBSS);
-		if ( result ) {
+						  HFA384x_RID_CNFPORTTYPE,
+						  HFA384x_PORTTYPE_IBSS);
+		if (result) {
 			printk(KERN_ERR "Failed to set CNFPORTTYPE.\n");
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 		/* ibss options */
 		result = hfa384x_drvr_setconfig16(hw,
-				HFA384x_RID_CREATEIBSS,
-				HFA384x_CREATEIBSS_JOINCREATEIBSS);
-		if ( result ) {
+						  HFA384x_RID_CREATEIBSS,
+						  HFA384x_CREATEIBSS_JOINCREATEIBSS);
+		if (result) {
 			printk(KERN_ERR "Failed to set CREATEIBSS.\n");
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 		result = hfa384x_drvr_enable(hw, 0);
-		if ( result ) {
+		if (result) {
 			printk(KERN_ERR "drvr_enable(0) failed. "
-					"result=%d\n", result);
+			       "result=%d\n", result);
 			msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 		istmpenable = 1;
 	}
 
-        /* Figure out our timeout first Kus, then HZ */
-        timeout = msg->channellist.data.len * msg->maxchanneltime.data;
-	timeout = (timeout * HZ)/1000;
+	/* Figure out our timeout first Kus, then HZ */
+	timeout = msg->channellist.data.len * msg->maxchanneltime.data;
+	timeout = (timeout * HZ) / 1000;
 
-        /* Issue the scan request */
-        hw->scanflag = 0;
+	/* Issue the scan request */
+	hw->scanflag = 0;
 
-        result = hfa384x_drvr_setconfig( hw,
-                        HFA384x_RID_HOSTSCAN, &scanreq,
-                        sizeof(hfa384x_HostScanRequest_data_t));
-        if ( result ) {
-                printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
-                                result);
-                msg->resultcode.data =
-                        P80211ENUM_resultcode_implementation_failure;
-                goto exit;
-        }
+	result = hfa384x_drvr_setconfig(hw,
+					HFA384x_RID_HOSTSCAN, &scanreq,
+					sizeof(hfa384x_HostScanRequest_data_t));
+	if (result) {
+		printk(KERN_ERR "setconfig(SCANREQUEST) failed. result=%d\n",
+		       result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
 
-        /* sleep until info frame arrives */
-        wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
+	/* sleep until info frame arrives */
+	wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
 
 	msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
 	if (hw->scanflag == -1)
@@ -304,16 +310,16 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 
 	msg->numbss.data = hw->scanflag;
 
-        hw->scanflag = 0;
+	hw->scanflag = 0;
 
 	/* Disable port if we temporarily enabled it. */
 	if (istmpenable) {
 		result = hfa384x_drvr_disable(hw, 0);
-		if ( result ) {
+		if (result) {
 			printk(KERN_ERR "drvr_disable(0) failed. "
-					"result=%d\n", result);
+			       "result=%d\n", result);
 			msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			goto exit;
 		}
 	}
@@ -321,24 +327,23 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 	/* restore original roaming mode */
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
 					  roamingmode);
-        if ( result ) {
-                printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
-                                result);
-                msg->resultcode.data =
-                        P80211ENUM_resultcode_implementation_failure;
-                goto exit;
-        }
-
-        result = 0;
-        msg->resultcode.data = P80211ENUM_resultcode_success;
-
- exit:
+	if (result) {
+		printk(KERN_ERR "setconfig(ROAMMODE) failed. result=%d\n",
+		       result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+
+	result = 0;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+exit:
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 
 	return result;
 }
 
-
 /*----------------------------------------------------------------
 * prism2mgmt_scan_results
 *
@@ -361,30 +366,32 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 {
-	int 			result = 0;
-        p80211msg_dot11req_scan_results_t       *req;
-	hfa384x_t		*hw = wlandev->priv;
+	int result = 0;
+	p80211msg_dot11req_scan_results_t *req;
+	hfa384x_t *hw = wlandev->priv;
 	hfa384x_HScanResultSub_t *item = NULL;
 
 	int count;
 
-        req = (p80211msg_dot11req_scan_results_t *) msgp;
+	req = (p80211msg_dot11req_scan_results_t *) msgp;
 
 	req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 
-	if (! hw->scanresults) {
-		printk(KERN_ERR "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
+	if (!hw->scanresults) {
+		printk(KERN_ERR
+		       "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
 		result = 2;
 		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
 		goto exit;
 	}
 
-        count = (hw->scanresults->framelen - 3) / 32;
-	if (count > 32)  count = 32;
+	count = (hw->scanresults->framelen - 3) / 32;
+	if (count > 32)
+		count = 32;
 
 	if (req->bssindex.data >= count) {
 		pr_debug("requested index (%d) out of range (%d)\n",
-				req->bssindex.data, count);
+		       req->bssindex.data, count);
 		result = 2;
 		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
 		goto exit;
@@ -408,9 +415,9 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 	memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
 
 	/* supported rates */
-        for (count = 0; count < 10 ; count++)
-                if (item->supprates[count] == 0)
-                        break;
+	for (count = 0; count < 10; count++)
+		if (item->supprates[count] == 0)
+			break;
 
 #define REQBASICRATE(N) \
 	if ((count >= N) && DOT11_RATE5_ISBASIC_GET(item->supprates[(N)-1])) { \
@@ -476,24 +483,14 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 	req->cfpollreq.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(count);
 
 	/* bsstype */
-	req->bsstype.status =  P80211ENUM_msgitem_status_data_ok;
+	req->bsstype.status = P80211ENUM_msgitem_status_data_ok;
 	req->bsstype.data = (WLAN_GET_MGMT_CAP_INFO_ESS(count)) ?
-		P80211ENUM_bsstype_infrastructure :
-		P80211ENUM_bsstype_independent;
-
-	// item->proberesp_rate
-/*
-	req->fhdwelltime
-	req->fhhopset
-	req->fhhoppattern
-	req->fhhopindex
-        req->cfpdurremaining
-*/
+	    P80211ENUM_bsstype_infrastructure : P80211ENUM_bsstype_independent;
 
 	result = 0;
 	req->resultcode.data = P80211ENUM_resultcode_success;
 
- exit:
+exit:
 	return result;
 }
 
@@ -518,14 +515,14 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 {
-	int 			result = 0;
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_dot11req_start_t	*msg = msgp;
+	int result = 0;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_dot11req_start_t *msg = msgp;
 
-	p80211pstrd_t		*pstr;
-	u8			bytebuf[80];
-	hfa384x_bytestr_t	*p2bytestr = (hfa384x_bytestr_t*)bytebuf;
-	u16			word;
+	p80211pstrd_t *pstr;
+	u8 bytebuf[80];
+	hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
+	u16 word;
 
 	wlandev->macmode = WLAN_MACMODE_NONE;
 
@@ -537,7 +534,7 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
 				     hw->ident_sta_fw.minor,
 				     hw->ident_sta_fw.variant) <
-	    HFA384x_FIRMWARE_VERSION(0,8,3)) {
+	    HFA384x_FIRMWARE_VERSION(0, 8, 3)) {
 		/* Ad-Hoc not quite supported on Prism2 */
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
@@ -549,17 +546,18 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	/*** STATION ***/
 	/* Set the REQUIRED config items */
 	/* SSID */
-	pstr = (p80211pstrd_t*)&(msg->ssid.data);
+	pstr = (p80211pstrd_t *)&(msg->ssid.data);
 	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
-	result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
-					 bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
-	if ( result ) {
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
+					bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+	if (result) {
 		printk(KERN_ERR "Failed to set CnfOwnSSID\n");
 		goto failed;
 	}
-	result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
-					 bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
-	if ( result ) {
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+					bytebuf,
+					HFA384x_RID_CNFDESIREDSSID_LEN);
+	if (result) {
 		printk(KERN_ERR "Failed to set CnfDesiredSSID\n");
 		goto failed;
 	}
@@ -571,7 +569,7 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	/* beacon period */
 	word = msg->beaconperiod.data;
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNint, word);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "Failed to set beacon period=%d.\n", word);
 		goto failed;
 	}
@@ -579,76 +577,76 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 	/* dschannel */
 	word = msg->dschannel.data;
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "Failed to set channel=%d.\n", word);
 		goto failed;
 	}
 	/* Basic rates */
 	word = p80211rate_to_p2bit(msg->basicrate1.data);
-	if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+	if (msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate2.data);
-	}
-	if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate3.data);
-	}
-	if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate4.data);
-	}
-	if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate5.data);
-	}
-	if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate6.data);
-	}
-	if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate7.data);
-	}
-	if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->basicrate8.data);
-	}
+
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "Failed to set basicrates=%d.\n", word);
 		goto failed;
 	}
 
 	/* Operational rates (supprates and txratecontrol) */
 	word = p80211rate_to_p2bit(msg->operationalrate1.data);
-	if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+	if (msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate2.data);
-	}
-	if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate3.data);
-	}
-	if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate4.data);
-	}
-	if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate5.data);
-	}
-	if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate6.data);
-	}
-	if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate7.data);
-	}
-	if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+
+	if (msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok)
 		word |= p80211rate_to_p2bit(msg->operationalrate8.data);
-	}
+
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "Failed to set supprates=%d.\n", word);
 		goto failed;
 	}
 
 	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "Failed to set txrates=%d.\n", word);
 		goto failed;
 	}
 
 	/* Set the macmode so the frame setup code knows what to do */
-	if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
+	if (msg->bsstype.data == P80211ENUM_bsstype_independent) {
 		wlandev->macmode = WLAN_MACMODE_IBSS_STA;
 		/* lets extend the data length a bit */
 		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
@@ -656,7 +654,7 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 
 	/* Enable the Port */
 	result = hfa384x_drvr_enable(hw, 0);
-	if ( result ) {
+	if (result) {
 		printk(KERN_ERR "Enable macport failed, result=%d.\n", result);
 		goto failed;
 	}
@@ -694,38 +692,35 @@ done:
 ----------------------------------------------------------------*/
 int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 {
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_p2req_readpda_t	*msg = msgp;
-	int				result;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_p2req_readpda_t *msg = msgp;
+	int result;
 
 	/* We only support collecting the PDA when in the FWLOAD
 	 * state.
 	 */
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
-			"PDA may only be read "
-			"in the fwload state.\n");
+		       "PDA may only be read " "in the fwload state.\n");
 		msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 	} else {
 		/*  Call drvr_readpda(), it handles the auxport enable
 		 *  and validating the returned PDA.
 		 */
-		result = hfa384x_drvr_readpda(
-			hw,
-			msg->pda.data,
-			HFA384x_PDA_LEN_MAX);
+		result = hfa384x_drvr_readpda(hw,
+					      msg->pda.data,
+					      HFA384x_PDA_LEN_MAX);
 		if (result) {
 			printk(KERN_ERR
-				"hfa384x_drvr_readpda() failed, "
-				"result=%d\n",
-				result);
+			       "hfa384x_drvr_readpda() failed, "
+			       "result=%d\n", result);
 
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			msg->resultcode.status =
-				P80211ENUM_msgitem_status_data_ok;
+			    P80211ENUM_msgitem_status_data_ok;
 			return 0;
 		}
 		msg->pda.status = P80211ENUM_msgitem_status_data_ok;
@@ -763,28 +758,29 @@ int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 {
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_p2req_ramdl_state_t	*msg = msgp;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_p2req_ramdl_state_t *msg = msgp;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
-			"ramdl_state(): may only be called "
-			"in the fwload state.\n");
+		       "ramdl_state(): may only be called "
+		       "in the fwload state.\n");
 		msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 		return 0;
 	}
 
 	/*
-	** Note: Interrupts are locked out if this is an AP and are NOT
-	** locked out if this is a station.
-	*/
+	 ** Note: Interrupts are locked out if this is an AP and are NOT
+	 ** locked out if this is a station.
+	 */
 
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-	if  ( msg->enable.data == P80211ENUM_truth_true ) {
-		if ( hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data) ) {
-			msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+	if (msg->enable.data == P80211ENUM_truth_true) {
+		if (hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data)) {
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
 		} else {
 			msg->resultcode.data = P80211ENUM_resultcode_success;
 		}
@@ -796,7 +792,6 @@ int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 	return 0;
 }
 
-
 /*----------------------------------------------------------------
 * prism2mgmt_ramdl_write
 *
@@ -819,42 +814,41 @@ int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
 {
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_p2req_ramdl_write_t	*msg = msgp;
-	u32			addr;
-	u32			len;
-	u8			*buf;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_p2req_ramdl_write_t *msg = msgp;
+	u32 addr;
+	u32 len;
+	u8 *buf;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
-			"ramdl_write(): may only be called "
-			"in the fwload state.\n");
+		       "ramdl_write(): may only be called "
+		       "in the fwload state.\n");
 		msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 		return 0;
 	}
 
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 	/* first validate the length */
-	if  ( msg->len.data > sizeof(msg->data.data) ) {
-		msg->resultcode.status = P80211ENUM_resultcode_invalid_parameters;
+	if (msg->len.data > sizeof(msg->data.data)) {
+		msg->resultcode.status =
+		    P80211ENUM_resultcode_invalid_parameters;
 		return 0;
 	}
 	/* call the hfa384x function to do the write */
 	addr = msg->addr.data;
 	len = msg->len.data;
 	buf = msg->data.data;
-	if ( hfa384x_drvr_ramdl_write(hw, addr, buf, len) ) {
+	if (hfa384x_drvr_ramdl_write(hw, addr, buf, len))
 		msg->resultcode.data = P80211ENUM_resultcode_refused;
 
-	}
 	msg->resultcode.data = P80211ENUM_resultcode_success;
 
 	return 0;
 }
 
-
 /*----------------------------------------------------------------
 * prism2mgmt_flashdl_state
 *
@@ -882,29 +876,30 @@ int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 {
-	int			result = 0;
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_p2req_flashdl_state_t	*msg = msgp;
+	int result = 0;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_p2req_flashdl_state_t *msg = msgp;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
-			"flashdl_state(): may only be called "
-			"in the fwload state.\n");
+		       "flashdl_state(): may only be called "
+		       "in the fwload state.\n");
 		msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 		return 0;
 	}
 
 	/*
-	** Note: Interrupts are locked out if this is an AP and are NOT
-	** locked out if this is a station.
-	*/
+	 ** Note: Interrupts are locked out if this is an AP and are NOT
+	 ** locked out if this is a station.
+	 */
 
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-	if  ( msg->enable.data == P80211ENUM_truth_true ) {
-		if ( hfa384x_drvr_flashdl_enable(hw) ) {
-			msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
+	if (msg->enable.data == P80211ENUM_truth_true) {
+		if (hfa384x_drvr_flashdl_enable(hw)) {
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
 		} else {
 			msg->resultcode.data = P80211ENUM_resultcode_success;
 		}
@@ -922,9 +917,9 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 		result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
 		if (result != P80211ENUM_resultcode_success) {
 			printk(KERN_ERR "prism2sta_ifstate(fwload) failed,"
-				"P80211ENUM_resultcode=%d\n", result);
+			       "P80211ENUM_resultcode=%d\n", result);
 			msg->resultcode.data =
-				P80211ENUM_resultcode_implementation_failure;
+			    P80211ENUM_resultcode_implementation_failure;
 			result = -1;
 		}
 	}
@@ -932,7 +927,6 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 	return 0;
 }
 
-
 /*----------------------------------------------------------------
 * prism2mgmt_flashdl_write
 *
@@ -953,42 +947,41 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
 {
-	hfa384x_t		*hw = wlandev->priv;
-	p80211msg_p2req_flashdl_write_t	*msg = msgp;
-	u32			addr;
-	u32			len;
-	u8			*buf;
+	hfa384x_t *hw = wlandev->priv;
+	p80211msg_p2req_flashdl_write_t *msg = msgp;
+	u32 addr;
+	u32 len;
+	u8 *buf;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
-			"flashdl_write(): may only be called "
-			"in the fwload state.\n");
+		       "flashdl_write(): may only be called "
+		       "in the fwload state.\n");
 		msg->resultcode.data =
-			P80211ENUM_resultcode_implementation_failure;
+		    P80211ENUM_resultcode_implementation_failure;
 		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 		return 0;
 	}
 
 	/*
-	** Note: Interrupts are locked out if this is an AP and are NOT
-	** locked out if this is a station.
-	*/
+	 ** Note: Interrupts are locked out if this is an AP and are NOT
+	 ** locked out if this is a station.
+	 */
 
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 	/* first validate the length */
-	if  ( msg->len.data > sizeof(msg->data.data) ) {
+	if (msg->len.data > sizeof(msg->data.data)) {
 		msg->resultcode.status =
-			P80211ENUM_resultcode_invalid_parameters;
+		    P80211ENUM_resultcode_invalid_parameters;
 		return 0;
 	}
 	/* call the hfa384x function to do the write */
 	addr = msg->addr.data;
 	len = msg->len.data;
 	buf = msg->data.data;
-	if ( hfa384x_drvr_flashdl_write(hw, addr, buf, len) ) {
+	if (hfa384x_drvr_flashdl_write(hw, addr, buf, len))
 		msg->resultcode.data = P80211ENUM_resultcode_refused;
 
-	}
 	msg->resultcode.data = P80211ENUM_resultcode_success;
 
 	return 0;
@@ -1015,14 +1008,14 @@ int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 {
-	hfa384x_t			*hw = wlandev->priv;
-	int 			result = 0;
-	u16			reg;
-	u16			port_type;
-	p80211msg_lnxreq_autojoin_t	*msg = msgp;
-	p80211pstrd_t		*pstr;
-	u8			bytebuf[256];
-	hfa384x_bytestr_t	*p2bytestr = (hfa384x_bytestr_t*)bytebuf;
+	hfa384x_t *hw = wlandev->priv;
+	int result = 0;
+	u16 reg;
+	u16 port_type;
+	p80211msg_lnxreq_autojoin_t *msg = msgp;
+	p80211pstrd_t *pstr;
+	u8 bytebuf[256];
+	hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
 
 	wlandev->macmode = WLAN_MACMODE_NONE;
 
@@ -1037,20 +1030,20 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 	hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
 
 	/* Set the auth type */
-	if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
+	if (msg->authtype.data == P80211ENUM_authalg_sharedkey)
 		reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
-	} else {
+	else
 		reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
-	}
+
 	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
 
 	/* Set the ssid */
 	memset(bytebuf, 0, 256);
-	pstr = (p80211pstrd_t*)&(msg->ssid.data);
+	pstr = (p80211pstrd_t *)&(msg->ssid.data);
 	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
-        result = hfa384x_drvr_setconfig(
-			hw, HFA384x_RID_CNFDESIREDSSID,
-			bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+					bytebuf,
+					HFA384x_RID_CNFDESIREDSSID_LEN);
 	port_type = HFA384x_PORTTYPE_BSS;
 	/* Set the PortType */
 	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
@@ -1065,7 +1058,6 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 	return result;
 }
 
-
 /*----------------------------------------------------------------
 * prism2mgmt_wlansniff
 *
@@ -1087,36 +1079,36 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 ----------------------------------------------------------------*/
 int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 {
-	int 			result = 0;
-	p80211msg_lnxreq_wlansniff_t	*msg = msgp;
+	int result = 0;
+	p80211msg_lnxreq_wlansniff_t *msg = msgp;
 
-	hfa384x_t			*hw = wlandev->priv;
-	u16			word;
+	hfa384x_t *hw = wlandev->priv;
+	u16 word;
 
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-	switch (msg->enable.data)
-	{
+	switch (msg->enable.data) {
 	case P80211ENUM_truth_false:
 		/* Confirm that we're in monitor mode */
-		if ( wlandev->netdev->type == ARPHRD_ETHER ) {
-			msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		if (wlandev->netdev->type == ARPHRD_ETHER) {
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_invalid_parameters;
 			result = 0;
 			goto exit;
 		}
 		/* Disable monitor mode */
 		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
-		if ( result ) {
-			pr_debug(
-				"failed to disable monitor mode, result=%d\n",
-				result);
+		if (result) {
+			printk(KERN_DEBUG
+			       "failed to disable monitor mode, result=%d\n",
+			       result);
 			goto failed;
 		}
 		/* Disable port 0 */
 		result = hfa384x_drvr_disable(hw, 0);
-		if ( result ) {
-			pr_debug(
-			"failed to disable port 0 after sniffing, result=%d\n",
-			result);
+		if (result) {
+			printk(KERN_DEBUG
+			       "failed to disable port 0 after sniffing, result=%d\n",
+			       result);
 			goto failed;
 		}
 		/* Clear the driver state */
@@ -1124,32 +1116,34 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 
 		/* Restore the wepflags */
 		result = hfa384x_drvr_setconfig16(hw,
-				HFA384x_RID_CNFWEPFLAGS,
-				hw->presniff_wepflags);
-		if ( result ) {
-			pr_debug(
-			"failed to restore wepflags=0x%04x, result=%d\n",
-			hw->presniff_wepflags,
-			result);
+						  HFA384x_RID_CNFWEPFLAGS,
+						  hw->presniff_wepflags);
+		if (result) {
+			printk(KERN_DEBUG
+			       "failed to restore wepflags=0x%04x, result=%d\n",
+			       hw->presniff_wepflags, result);
 			goto failed;
 		}
 
 		/* Set the port to its prior type and enable (if necessary) */
-		if (hw->presniff_port_type != 0 ) {
+		if (hw->presniff_port_type != 0) {
 			word = hw->presniff_port_type;
 			result = hfa384x_drvr_setconfig16(hw,
-				HFA384x_RID_CNFPORTTYPE, word);
-			if ( result ) {
-				pr_debug(
-				"failed to restore porttype, result=%d\n",
-				result);
+							  HFA384x_RID_CNFPORTTYPE,
+							  word);
+			if (result) {
+				printk(KERN_DEBUG
+				       "failed to restore porttype, result=%d\n",
+				       result);
 				goto failed;
 			}
 
 			/* Enable the port */
 			result = hfa384x_drvr_enable(hw, 0);
-			if ( result ) {
-				pr_debug("failed to enable port to presniff setting, result=%d\n", result);
+			if (result) {
+				printk(KERN_DEBUG
+				       "failed to enable port to presniff setting, result=%d\n",
+				       result);
 				goto failed;
 			}
 		} else {
@@ -1164,39 +1158,45 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 		break;
 	case P80211ENUM_truth_true:
 		/* Disable the port (if enabled), only check Port 0 */
-		if ( hw->port_enabled[0]) {
+		if (hw->port_enabled[0]) {
 			if (wlandev->netdev->type == ARPHRD_ETHER) {
 				/* Save macport 0 state */
 				result = hfa384x_drvr_getconfig16(hw,
 								  HFA384x_RID_CNFPORTTYPE,
-								  &(hw->presniff_port_type));
-				if ( result ) {
-					pr_debug("failed to read porttype, result=%d\n", result);
+								  &(hw->
+								    presniff_port_type));
+				if (result) {
+					printk(KERN_DEBUG
+					       "failed to read porttype, result=%d\n",
+					       result);
 					goto failed;
 				}
 				/* Save the wepflags state */
 				result = hfa384x_drvr_getconfig16(hw,
 								  HFA384x_RID_CNFWEPFLAGS,
-								  &(hw->presniff_wepflags));
-				if ( result ) {
-					pr_debug("failed to read wepflags, result=%d\n", result);
+								  &(hw->
+								    presniff_wepflags));
+				if (result) {
+					printk(KERN_DEBUG
+					       "failed to read wepflags, result=%d\n",
+					       result);
 					goto failed;
 				}
 				hfa384x_drvr_stop(hw);
 				result = hfa384x_drvr_start(hw);
-				if ( result ) {
-					pr_debug(
-						       "failed to restart the card for sniffing, result=%d\n",
-						       result);
+				if (result) {
+					printk(KERN_DEBUG
+					       "failed to restart the card for sniffing, result=%d\n",
+					       result);
 					goto failed;
 				}
 			} else {
 				/* Disable the port */
 				result = hfa384x_drvr_disable(hw, 0);
-				if ( result ) {
-					pr_debug(
-						       "failed to enable port for sniffing, result=%d\n",
-						       result);
+				if (result) {
+					printk(KERN_DEBUG
+					       "failed to enable port for sniffing, result=%d\n",
+					       result);
 					goto failed;
 				}
 			}
@@ -1207,14 +1207,14 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 		/* Set the channel we wish to sniff  */
 		word = msg->channel.data;
 		result = hfa384x_drvr_setconfig16(hw,
-						  HFA384x_RID_CNFOWNCHANNEL, word);
-		hw->sniff_channel=word;
+						  HFA384x_RID_CNFOWNCHANNEL,
+						  word);
+		hw->sniff_channel = word;
 
-		if ( result ) {
-			pr_debug(
-				       "failed to set channel %d, result=%d\n",
-					       word,
-				       result);
+		if (result) {
+			printk(KERN_DEBUG
+			       "failed to set channel %d, result=%d\n",
+			       word, result);
 			goto failed;
 		}
 
@@ -1223,39 +1223,46 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 			/* Set the port type to pIbss */
 			word = HFA384x_PORTTYPE_PSUEDOIBSS;
 			result = hfa384x_drvr_setconfig16(hw,
-							  HFA384x_RID_CNFPORTTYPE, word);
-			if ( result ) {
-				pr_debug(
-					       "failed to set porttype %d, result=%d\n",
-					       word,
-					       result);
+							  HFA384x_RID_CNFPORTTYPE,
+							  word);
+			if (result) {
+				printk(KERN_DEBUG
+				       "failed to set porttype %d, result=%d\n",
+				       word, result);
 				goto failed;
 			}
-			if ((msg->keepwepflags.status == P80211ENUM_msgitem_status_data_ok) && (msg->keepwepflags.data != P80211ENUM_truth_true)) {
+			if ((msg->keepwepflags.status ==
+			     P80211ENUM_msgitem_status_data_ok)
+			    && (msg->keepwepflags.data !=
+				P80211ENUM_truth_true)) {
 				/* Set the wepflags for no decryption */
 				word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT |
-					HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
-				result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFWEPFLAGS, word);
+				    HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
+				result =
+				    hfa384x_drvr_setconfig16(hw,
+							     HFA384x_RID_CNFWEPFLAGS,
+							     word);
 			}
 
-			if ( result ) {
-				pr_debug(
-					       "failed to set wepflags=0x%04x, result=%d\n",
-					       word,
-					       result);
+			if (result) {
+				printk(KERN_DEBUG
+				       "failed to set wepflags=0x%04x, result=%d\n",
+				       word, result);
 				goto failed;
 			}
 		}
 
 		/* Do we want to strip the FCS in monitor mode? */
-		if ((msg->stripfcs.status == P80211ENUM_msgitem_status_data_ok) && (msg->stripfcs.data == P80211ENUM_truth_true)) {
+		if ((msg->stripfcs.status == P80211ENUM_msgitem_status_data_ok)
+		    && (msg->stripfcs.data == P80211ENUM_truth_true)) {
 			hw->sniff_fcs = 0;
 		} else {
 			hw->sniff_fcs = 1;
 		}
 
 		/* Do we want to truncate the packets? */
-		if (msg->packet_trunc.status == P80211ENUM_msgitem_status_data_ok) {
+		if (msg->packet_trunc.status ==
+		    P80211ENUM_msgitem_status_data_ok) {
 			hw->sniff_truncate = msg->packet_trunc.data;
 		} else {
 			hw->sniff_truncate = 0;
@@ -1263,31 +1270,35 @@ int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 
 		/* Enable the port */
 		result = hfa384x_drvr_enable(hw, 0);
-		if ( result ) {
-			pr_debug(
-			"failed to enable port for sniffing, result=%d\n",
-			result);
+		if (result) {
+			printk(KERN_DEBUG
+			       "failed to enable port for sniffing, result=%d\n",
+			       result);
 			goto failed;
 		}
 		/* Enable monitor mode */
 		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
-		if ( result ) {
-			pr_debug(
-			"failed to enable monitor mode, result=%d\n",
-			result);
+		if (result) {
+			printk(KERN_DEBUG
+			       "failed to enable monitor mode, result=%d\n",
+			       result);
 			goto failed;
 		}
 
-		if (wlandev->netdev->type == ARPHRD_ETHER) {
+		if (wlandev->netdev->type == ARPHRD_ETHER)
 			printk(KERN_INFO "monitor mode enabled\n");
-		}
 
 		/* Set the driver state */
 		/* Do we want the prism2 header? */
-		if ((msg->prismheader.status == P80211ENUM_msgitem_status_data_ok) && (msg->prismheader.data == P80211ENUM_truth_true)) {
+		if ((msg->prismheader.status ==
+		     P80211ENUM_msgitem_status_data_ok)
+		    && (msg->prismheader.data == P80211ENUM_truth_true)) {
 			hw->sniffhdr = 0;
 			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
-		} else if ((msg->wlanheader.status == P80211ENUM_msgitem_status_data_ok) && (msg->wlanheader.data == P80211ENUM_truth_true)) {
+		} else
+		    if ((msg->wlanheader.status ==
+			 P80211ENUM_msgitem_status_data_ok)
+			&& (msg->wlanheader.data == P80211ENUM_truth_true)) {
 			hw->sniffhdr = 1;
 			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
 		} else {