irqchip: add nps Internal and external irqchips

Adding EZchip NPS400 support.
Internal interrupts are handled by Multi Thread Manager (MTM)
Once interrupt is serviced MTM is acked for deactivating the interrupt.
External interrupts are handled by MTM as well as at Global Interrupt
Controller (GIC) e.g. serial and network devices.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>

Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt

@@ -0,0 +1,17 @@
+EZchip NPS Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-ic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "ezchip,nps400-ic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};

drivers/irqchip/Kconfig

@@ -244,3 +244,9 @@ config IRQ_MXS
 config MVEBU_ODMI
 	bool
 	select GENERIC_MSI_IRQ_DOMAIN
+
+config EZNPS_GIC
+	bool "NPS400 Global Interrupt Manager (GIM)"
+	select IRQ_DOMAIN
+	help
+	  Support the EZchip NPS400 global interrupt controller

drivers/irqchip/Makefile

@@ -65,3 +65,4 @@ obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
+obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o

drivers/irqchip/irq-eznps.c

@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <soc/nps/common.h>
+
+#define NPS_NR_CPU_IRQS 8  /* number of interrupt lines of NPS400 CPU */
+#define NPS_TIMER0_IRQ  3
+
+/*
+ * NPS400 core includes an Interrupt Controller (IC) support.
+ * All cores can deactivate level irqs at first level control
+ * at cores mesh layer called MTM.
+ * For devices out side chip e.g. uart, network there is another
+ * level called Global Interrupt Manager (GIM).
+ * This second level can control level and edge interrupt.
+ *
+ * NOTE: AUX_IENABLE and CTOP_AUX_IACK are auxiliary registers
+ * with private HW copy per CPU.
+ */
+
+static void nps400_irq_mask(struct irq_data *irqd)
+{
+	unsigned int ienb;
+	unsigned int irq = irqd_to_hwirq(irqd);
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb &= ~(1 << irq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_unmask(struct irq_data *irqd)
+{
+	unsigned int ienb;
+	unsigned int irq = irqd_to_hwirq(irqd);
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb |= (1 << irq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void nps400_irq_eoi_global(struct irq_data *irqd)
+{
+	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
+
+	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
+
+	/* Don't ack GIC before all device access attempts are done */
+	mb();
+
+	nps_ack_gic();
+}
+
+static void nps400_irq_eoi(struct irq_data *irqd)
+{
+	unsigned int __maybe_unused irq = irqd_to_hwirq(irqd);
+
+	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
+}
+
+static struct irq_chip nps400_irq_chip_fasteoi = {
+	.name		= "NPS400 IC Global",
+	.irq_mask	= nps400_irq_mask,
+	.irq_unmask	= nps400_irq_unmask,
+	.irq_eoi	= nps400_irq_eoi_global,
+};
+
+static struct irq_chip nps400_irq_chip_percpu = {
+	.name		= "NPS400 IC",
+	.irq_mask	= nps400_irq_mask,
+	.irq_unmask	= nps400_irq_unmask,
+	.irq_eoi	= nps400_irq_eoi,
+};
+
+static int nps400_irq_map(struct irq_domain *d, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	switch (hw) {
+	case NPS_TIMER0_IRQ:
+#ifdef CONFIG_SMP
+	case NPS_IPI_IRQ:
+#endif
+		irq_set_percpu_devid(virq);
+		irq_set_chip_and_handler(virq, &nps400_irq_chip_percpu,
+					 handle_percpu_devid_irq);
+		break;
+	default:
+		irq_set_chip_and_handler(virq, &nps400_irq_chip_fasteoi,
+					 handle_fasteoi_irq);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops nps400_irq_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.map = nps400_irq_map,
+};
+
+static int __init nps400_of_init(struct device_node *node,
+				 struct device_node *parent)
+{
+	static struct irq_domain *nps400_root_domain;
+
+	if (parent) {
+		pr_err("DeviceTree incore ic not a root irq controller\n");
+		return -EINVAL;
+	}
+
+	nps400_root_domain = irq_domain_add_linear(node, NPS_NR_CPU_IRQS,
+						   &nps400_irq_ops, NULL);
+
+	if (!nps400_root_domain) {
+		pr_err("nps400 root irq domain not avail\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * Needed for primary domain lookup to succeed
+	 * This is a primary irqchip, and can never have a parent
+	 */
+	irq_set_default_host(nps400_root_domain);
+
+#ifdef CONFIG_SMP
+	irq_create_mapping(nps400_root_domain, NPS_IPI_IRQ);
+#endif
+
+	return 0;
+}
+IRQCHIP_DECLARE(ezchip_nps400_ic, "ezchip,nps400-ic", nps400_of_init);